Serene HD Phone CL-60A User manual

Model: CL-60A

Amplified DECT Cordless Telephone (50dB)

With Talking CID & Talk-Back Features

Model: CL-35A

Amplified DECT Cordless Telephone (40dB)

CONTENT

1

2

Product Features

Important safety instruc tions

2-3

4

4

5

3 Battery And AC Power Adapter 5

Package content

Installation

6

7

8

9

10

11

De tailed features and controls

Handset screen icons

Handset’s menu function flow chart

Answering a call

Making a call

Receiver volume control

6

6

7

8

9

10

10

10

12

(Amplify) function 10

13

14

Receiver tone control

Automatic function & Talking function switches

10

10-11

15

20

21

22

23

16

17

18

19

Pr og ramm ing

one -touch memories

Dialing from a one- touch memory

Out-going call list (Redial /

Create phone book entries

List and search a phon e-boo k entry

Edi t a phone-book entry

Dele te (dele te all) phon e-boo k entries

Review memory status (phone-book)

34

35

36

37

28

29

30

31

32

33

24 CL-35 Talking CID/Keypad

25

26

27

General procedures for sub-menu function settings

Register a new handset t o base

Handset de-register

De-register all handsets

Area code setting

Dialing mode setting

Auto-answe r when lifting handset

Flash time setting

Handset name setting

Language selection

Modify PIN (changing the password)

Time format setting

Date & time setting

38 Handset defaul t setting

39 Base default setting

40 Call log review (re ceived calls)

13

14

14

15

15

15

16

16

16

17

17

17

18

18-19

19

19

19-20

11

11

11

11-12

12

12

12-13

13

13

41

Call back to anincoming caller

42 Save an incom ing

call to

CONTENT

-book

44 Delete all incoming call records from call log

45 Call log review (dialed calls )

46 Save from call list to phone-book

47 Delete a call from call list

48 Intercom between handsets

49 Handset ring tone & volume setting

50 Keypad tone & warning tone setting

51 Call waiting

52 Forward an incoming call from handset 1 to handset 2

53 Conference call

54 Barring (toll call restricti on)

55 Handset microphone mute funcion

24

24-25

25

25

26

56 Pause function

57 Handset power on / off

26

26

58 TAM Operation from Base Unit 26

59 Answer machine mode setup 26

60 OGM (Out Going Message) operation

61 Memo operation

26-27

27

62 ICM (Incoming Call Message) operation

63 New message indication

64

Message playback

65 Erase messages

66 Time setup

67 Ring setup

27-28

28

28-29

29

29-30

30-31

21

22

22

23

20

20

20

20-21

21

21

68 Toll Saver

69 Volume increasing/decreasing

70 Remote Operation

71 Message Operation Form Remote Control Phone

72

73

74

OGM operation from remote control phone

Set answer machine mode from remote control phone

Set security code from remote control phone

75

76

82

Specification

Trouble Shooting

Warranty Service Information

83

This

Equipment Complies

With Part 68 Of The FCC Rules

31

31

31-32

32

32-33

33

33

34

34-35

35-36

36-37

84

85

86

Part 15 Of FCC Rules Information

Modification

NOTICE

37

38

38-39

PRODUCT FEATURES

1. DECT 6.0 Technology ensures crystal clear conversation

2. Up to 50 dB Of receiver amplification (5 volume levels); 40dB for CL-35

3. “AMPLIFY” key that automatically returns to the last receiver volume setting

4. Four (4) digital tone control settings

5. High performance speakerphone

6. Talking CID & Talking keypad on CL-60 (English or French) - can be

switched off.

7. Large LCD display with backlight

8. Three display languages (English, French & Spanish)

9. Loud ringer in handset and base(CL-35 has no base ringer )

10. Bright ring flasher in handset and base

11.

12.

13.

Compatible with FSK CID (Type II) and voice mail signals

14.

Extra-large keypad buttons

15.

Three one-touch memory

16.

Emergency one-touch memory (dials number and turns on speakerphone)

40 Incoming call list memories; 10 Out-going call list memories;

17. 150 Phone Book Memories

18. Max link up to 5 handsets

19. Keyboard non-disturb function

20.

Volume adjustment (5 levels)

21.

Low battery voice warning; Out-of-range alarm

22.

Auto-answer when lift ing handset off the base

23. 10 handset ring tones and 5 base ring tones

24. Intercom function

25. Three-way conference

26. On-line and Off-Line buttons

27.

Battery back-up option on Base

28.

Swap battery between handset and base

29. 22kbps compression algorithm, 60minutes of voice storage time

30. 2 available Voice date-time stamp (DTS) and user prompts

(English / German)

31. Options to work without voice prompt selectable.

32. Recording up to 59 messages

33.OGM recording up to 60 seconds

34.Memo and ICM recording up to 120 seconds

-2-

35.2-way recording function

36. Erase each message/all messages

37.Ring delay selectable

38.Busy tone/Ring tone/continuous tone detection

39.DTMF detection for remote control

40.Call screening

41.Call intercepts function by stop key

42.VOX function, 5 seconds/8 seconds voice detection selectable for line disconnection

43.New Message LED indication

44.7-segment digit LED display enable or disable

45.Digital volume control (7 steps volume adjustable at least)

46.Remote control from handset

47.Remote control from the other end telephone

48.-digit user selectable remote codes, default “0000”

-3-

Important Safety Instructions

Instructions pertaining to a risk of fire, electric shock or injury to persons.

Privacy of communications may not be ensured when using a cordless phone.

Caution: To maintain compliance with the FCC's RF exposure guideline, place the base unit 20 cm from nearby persons.

WARNING - When using electric appliances, basic precautions should always be followed, including the following:

1. Read all the instructions before using the appliance.

2. This product uses rechargeable batteries. Do not use any nonrechargeable battery as charging of this type can cause battery leakage.

3. Always disconnect phone cord to wall jack before changing or installing batteries.

4. To reduce the risk of injury, close supervision is necessary when an appliance is used near children.

5. Do not contact moving parts or any exposed metal surface.

6. Only use attachments recommended or sold by the manufacturer.

7. Do not use outdoors. Do not use near water.

8. To disconnect, turn all controls to the off position, then remove plug from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Unplug from outlet when not in use and before servicing or cleaning.

11. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner.

Return appliance to the nearest authorized service facility for

examination, repair, or electrical or mechanical adjustment.

12. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized

outlet only one way. If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified electrician to install

the proper outlet. Do not change the plug in anyway.

13. Avoid using any telephone product during an electrical storm.

There may be a remote risk of electric shock from lightning.

14. Do not use the telephone to report a gas leak in the vicinity of the leak.

15. Specifications of this product are subjected to change without notice.

-4-

(

60 and 6.5 hours for CL-35)

-5-

5

T

T

To wall phone jack

To AC outlet

CL-60 & CL-35 Comparison

CL-60 CL-35

Maximum amplification......................... 50dB 40dB

Talking CID/keypad.............................. yes no

Audio output Jack................................ yes no

Back light Color................................... white amber

Battery life ......................................... 8 hrs 6.5hrs

Base ringer ........................................ yes no

-6off-line.

This function is on CL-60 only

-7-

(CL-60 only)

/line

(CL-60 only)

-8-

TAM

Message

OGM

TAM SETTING

NEW MSG

SAVED MSG

MEMO

DELETE ALL

OGM1

OGM2

-9-

TAM ON/OFF

TAM ALERT

SET OGM

SET RING

TAM VOICE

REMOTE CODE

TAM DEFAULT

ON

OFF

ON

OFF

OGM1

OGM2

-10-

-11-

CL-60

-12-

CL-35 Talking CID/Keypad

CL-35 does not offer this feature. Therefore, they are set to “off” at the software menu. Do not try to change this setting.

-13-

PAGE and

-14-

PAGE

PAGE to confirm to confirm to confirm. A first

Input PIN to confirm name.

FL/DEL

-15-

Factory default is tone dialing

-16-

Talking feature is for CL-60 only.

-17-

display “NEW PIN” then press . It

-18-

-19-

-20-21-

-22-

-23-

PAGE

indicating

PAGE

-24-

-25-

TAM Operation from Base Unit

There are approximately 60minutes of total recording time.

Answer machine mode setup

“Answer on” with the LED turned “ON” and “Answer off” with the

LED turned “OFF”.

2.Press and hold “ answer”key for 3 seconds to toggle between new

message alert on/off

OGM (Out Going Message) operation

1. Press and hold “ OGM ”key for 3 seconds to start OGM recording.

The machine will announce “To record a new outgoing message,

please speak after the tone”. During OGM recording, press“ ”

key to end the recording.

-

-26-

2. There are 60 seconds for OGM recording. If you don't press any key, it will automatically finish OGM recording after 60 sec.

3. While Answering Machine is in standby mode, press “ ”key

once to playback OGM. Default OGM voice is: “Hello, your call

can not

be taken at the moment, please leave your message after the tone.”

4. During OGM playback, press “ ” key once to delete recorded

OGM,and the default OGM will be announced and used at once.

5. New OGM can not be recorded if memory is full.

6. Default OGM can not be erased.

Memo operation

1. Press and hold “MEMO”key for 3 seconds to start memo recording.

The machine announces “To record a message, please speak after

the tone”. During memo recording, press “ ”key once to end

recording.

2. You have max 180 seconds for memo recording. If you don't press

any key, it will automatically finish recording after 180 seconds.

3. If memory full occurs during memo recording, a “Sorry, the memory

is full” message will be announced before the machine returns to

standby mode

ICM (Incoming Call Message) operation

1. During “Answer on” mode, incoming calls will be received by the

answering machine, plays OGM followed by a beep tone then

performs ICM recording..

2. You have 180 seconds to record your message.

3. The ICM recording will stop if any of the following events occur,

i.e., 5 or 8seconds of silence, continuous signal or busy tone,

the 180 seconds record time is used up, the parallel phone is

picked up, or “ ” key is pressed.

4. If parallel phone picked up is detected, the message being

recorded will be saved as a new message.

-27-

5. Press “ ” key during recording, the message being recorded

will not be saved.

6. A long beep tone will be transmitted to indicate that ICM recording

is finished.

7. With only ten seconds remaining before memory is full, the machine

will announce “Please complete your call within ten seconds.” After

ten seconds, it will stop the ICM recording and releases the line.

The message will be saved as a new message.

8. If the memory is full, an incoming call will be picked up by the

machine,plays back the OGM followed with “Sorry, memory is full”

and then hangs up the line.

New message indication

1. If there are new messages, the new message LED will be flashing

and the 7 segment LED will indicate the number of messages.

A display of “2” means there are two new messages.

2. If there are new messages but with old messages, the new

message LED still will be flashing but the LED display shows the

total message count not just the number of new messages.

3. If message alert is on, the machine will beep every 30 seconds.

Message playback

1. Press “ ” key once to play messages.

* If there are new messages, it will announce “you have X new

messages, new message one (message content), new message

two (message content)”, until the X new message. After finishing

the playback, it announces “End of messages”.

* If there are no new messages but there are old messages, it will

announce “You have no new messages. You have X messages,

message one (message content), message two (message content)”,

until the X message. After playback is finished, it announces “End

of messages”.

* If there are no any messages, it announces “You have no messages”.

2.Press “ ”key for one time will display the next one message;

press “ ” key for one time ,will display the last one message;

press “ ” key for one time , will stop displaying ;press “ ” for

one time return to standby mode;

Erase messages

1.

message; it will announce “Message deleted”. The machine will

then play the next message but if all messages are deleted, it will

announce “End of messages”.

2.

all messages, the machine will announce “All messages deleted”.

Time setup

1. This setting allows you to set the current day and time for Time/Day stamp attached to each message. Messages' Time/Day stamp will

not be attached when it is not set up.

2. The LED display shows “PL” when Date and Time are not set up.

3. Time setup resets every time the power supply is unplugged.

4. If the date and time are not set, the machine will say “Please set

date and time” when the “ TIME ” key is pressed once.

5. Press and hold “TIME ” key for 3 seconds to enter date/time setup

mode:

6. The machine announces “Set year”. The LED display indicates

-28-

decrease respectively the year setting and press “TIME ” key to

confirm;

-29-

7. The machine announces “Set month”. The LED display indicates

VOL

or decrease the month setting and press “TIME ” key to confirm;

8. The machine then announces “Set day”. The LED display

indicates the day so press “ ” or “ ” key again to increase or

decrease the day setting and press “TIME ” key again to confirm;

9

. The machine finally announces “Set hour”. The LED display now

indicates the hour. Press “ ” or “ ” key to scroll the correct

VOL

VOL

hour setting and press “TIME ” key again to confirm. Note: The

hour setting is in 24hour format. Example: If it is 5 in the afternoon,

place the hour to 17, the machine will be announcing it as 5 P.M.;

10

.The machine will then announce “Set minute”. The LED display this

VOL

correct minute then press “TIME ” key to confirm;

11.After the minute confirmation, the machine will instantly announce

the new day and time. i.e. “Tuesday, Five P.M.”. Please note that

the voice DTS will not prompt the year and month.

12.If no key input within eight seconds, the set up procedure will be

abandoned.

13.In standby mode, press “TIME ” key once to play DTS, the machine

will play the entered day and time

Ring setup

1. This setting allows you to input the desired number of rings before

the machine will receive the call, the procedure is as follows:

2. There are 2 to 9 rings and a Toll saver (“SA”) mode to select from.

3. Press and hold “ ” key for 3 seconds to set ringer mode. The

machine announces the initial setting; i.e. “Nine”. (This means,

it will receive the call after nine rings.) The LED display also

indicates “09”.

toll saver mode.

VOL

-30-

5. Press “ ” key again to confirm setup. The machine will

immediately announce the new entered Ring setup and returns

to standby mode.

6. At standby mode, press and hold “ ”key for 3 seconds .The

machine will say “Calls will be answered after nine rings”.

7. When Ring setup selected is “Toll saver”, it performs these

functions. (see explanation below)

Toll Saver

when toll saver mode is selected,at standby mode,press andhold ” ” key for 3 seconds.the machine will announce "time saver", wait a monent ,it continuously announce "ring delay is set to time saver"

1.if the unit has new message,calls will be answered after 3 rings.

2.if the unit has not new message,calls will be answered after 7 rings.

So if user want to review family machine's messages from outside telephone byremote mode,he can choose to range up telephone after 3 rings if no new message.

Volume increasing/decreasing

>> Press “ ” / “ ”keys to increase/decrease speaker volume.

>> These keys can also be used to scroll the desired settings for time,

pin code and message play back

Remote Operation

Enter remote operation

>> Call the DAM.-wait for ogm to be played or when memory is full,

finishplaying the voice prompt:“hello,your call can not be taken

at this moment,please call again later”then enter the 4 digit

securitycode that you have set for the answering machine.

>> If the security code you entered is incorrect,themachine will

announce“security code is incorrect,please enter your security

code”.you are allowedThree times to re-enter your security code.

if the third try is incorrect,the machineWill hang up the line.

>> Once you entered the correct security code,you are in the remote

controloperation mode.if you have no new messages,the machine

will be playingthe following voice prompts.

-31-

“You have no new messages”

“To listen to the main menu,press 1”

when you press 1,the following voice

prompts will be announced:

“to play new messages,press 2”

“ ”

“ to play new messages,press 3 to delete messages,press 4”

“to set answer on or off,press 5”

“to record a new outgoing message,press 6”

“to listen to the main menu again,press 1”

>> if no key input within eight seconds,the remote operation

will be canceled and hangs up the line.

>> pressing “ ”key on the machine or picking up parallel

hpone will stop theremote operation.

message operation form remote control phone

>> at remote control opration main menu,the following

procedure can be done:

>> if there are new messages,the machine will immediately

play the new messages. it will say “you have X new

messages,new message one”.

>> if there are no messages,it will announce“you have no

messages”,the machine will announce“to listen to the main

menu,press 1”.

>> after finish playback fo the last message,it will announce“end

of ,messages,to delete all messages press 4”then beeps followed

by“you have no messages”

>> during message playback,the following can be done:

>> press “1”to play previous message

>> press“2”to play next message;

>> press“3”to play again the message;

>> press“4”to delete the current message,it will announce

“message deleted”and plays the next message;

>> you have 120 seconds to record your message.after 120

seconds,along beeptone will be played and the message

will be saved as new message;the machine will go to main menu.

.

OGM operation from remote control phone

1. In remote control operation main menu, you can record a new OGM

from remote control phone by pressing “6”. The machine will

announce “Please speak after the tone”, “To end recording, press

Hash”. After the recording it will announce “to listen to the main menu, press 1”.

-32-

2. During recorded OGM playback, pressing “0” can erase OGM, a

long beep tone to confirm OGM deleted and then play the default

OGM.

1. Default OGM and announcement can not be erased

Set answer machine mode from remote control phone

1. In remote control operation main menu, you can change answer

machine mode as following:

Press “5” to set answer on/off, it announces “Answer on” or

“Answer off”

2. During recorded OGM playback, pressing “4” can erase OGM, a

long beep tone to confirm OGM deleted and then play the default

OGM.

Set security code from remote control phone

1. In remote control operation main menu, press “9” to set a new

security code for your answer machine. The machine will say “To

set a new security code, press *”, “To listen to your security code,

press #”

2. Once “*” is pressed, it will say “Please enter your new security

code after the tone”; 4 digits can be entered from the keypad; After

you enter new security code, it will say “Your security code is XXXX”,

then the machine will say“To listen to the main menu, press 1”.

3. Once “#” is pressed, it will play the security code, “Your security

code is XXXX”, then announces “To listen to the main menu, press 1”

4 digits can be entered for security code.

4.

If no key input within 8 seconds, the machine will say “to listen to

the main menu, press 1”

-33-

Specification

CL-60:

CL-35: 22

CL-60

( T1 to T4 )

(English voice in Spanish mode)

5

NOTE: Specifications are subject change without any notice right

-34-

-35-

(2)

-36-

-37-

-38-

Serene Innovations, Inc.

www.sereneinnovations.com Tel: (562) 407 - 5400

Toll-free Help Line: (866) 376 - 9271 (9AM - 5PM, M-F)

Manual # 20100316-rev 1

-

-39-