Oracle 11.1.2.0.00 Hyperion Enterprise Performance Management System Readme

Oracle® Hyperion Enterprise Performance Management System
Installation and Configuration
Release 11.1.2.0.00
Readme
Purpose ................................................................................................................................. 1
New Features ........................................................................................................................ 1
General Installation Information ........................................................................................... 3
Translation Support............................................................................................................... 5
Known Issues........................................................................................................................ 5
Accessibility Considerations ................................................................................................ 20
Documentation Updates ...................................................................................................... 21
Defects Fixed in this Release ............................................................................................... 22
Purpose
This document includes important, late-breaking installation and configuration information about this
release of Oracle Hyperion Enterprise Performance Management System products.
Note: See the individual product Readmes for other late-breaking product information.
Review this information thoroughly before installing.
It is our goal to make Oracle products, services, and supporting documentation accessible to the
disabled community. Oracle Hyperion Enterprise Performance Management System supports
accessibility features, which are described in Appendix H of the Oracle Hyperion Enterprise
Performance Management System Installation and Configuration Guide.
This readme file is accessible in this release in HTML format.
Top of Document
New Features
EPM System Installer now installs these items:
o
WebLogic Server (replaces Apache Tomcat as the embedded Java container)
o
Oracle HTTP Server (replaces Apache Web server as the embedded Web server)
See the Certification Matrix:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
for the versions installed and for a list of other supported application servers and Web servers. For
more information, see the Oracle Hyperion Enterprise Performance Management System
Installation and Configuration Guide.
pg. 1
Most EPM System products have adopted Oracle Diagnostic Logging (ODL) as the logging mechanism.
The ODL framework provides uniform support for managing log files, including log file rotation,
maximum log file size, and the maximum log directory size. For more information, see the “Using EPM
System Logs” chapter of the Oracle Hyperion Enterprise Performance Management System Installation
and Configuration Troubleshooting Guide.
Oracle Configuration Manager (OCM) integrates with My Oracle Support and provides configuration
information for Oracle software. It assists in the troubleshooting, maintenance, and diagnostics of your
EPM System deployment. For more information about Oracle Configuration Manager, see the Oracle
Hyperion Enterprise Performance Management System Installation and Configuration Guide.
This release allows the system administrator to reconfigure logical references to existing, deployed
Web applications without redeploying them.
With this release, many EPM System products support host names that resolve to IPv6 addresses. See
the Oracle Hyperion Enterprise Performance Management System Certification Matrix. IPv4 support
(both host name and IP address) remains unchanged from earlier releases.
EPM supports the following types of SSL configuration:
o
Full SSL Deployment (including data access)
o
SSL Terminating at the Web Server
o
SSL Accelerators (off-loading)
o
Two-way SSL
For more information on the SSL configurations, see the Oracle Hyperion Enterprise Performance
Management System Security Administration Guide.
EPM System Configurator now requires the Shared Services “admin” password to be changed during
system configuration. Once deployed, subsequent password changes are done through Shared
Services. For more information, see the Oracle Hyperion Enterprise Performance Management System
Installation and Configuration Guide.
Essbase now supports active-passive failover without Oracle Clusterware. You can use EPM System
Configurator to configure Essbase in an active-passive failover configuration with write-back capability.
For more information, see the Oracle Hyperion Enterprise Performance Management System
Installation and Configuration Guide and the Oracle Hyperion Enterprise Performance Management
System High Availability Guide.
Microsoft Windows Installer (MSI) Client Installers are now provided for Essbase Excel Add-in and
Disclosure Management.
Essbase Server supports Oracle Process Manager and Notification Server (OPMN) Integration. For more
information, see the Oracle Hyperion Enterprise Performance Management System Installation and
Configuration Guide.
New Products
EPM System releases the following new products:
Oracle Hyperion Financial Close Management-Helps companies define, execute, and report on the
interdependent activities of a financial close period. It provides centralized monitoring of all close
pg. 2
process tasks and provides a visible, automated, repeatable system of record for running close
processes.
Oracle Hyperion Disclosure Management-Allows you to assemble a reporting package for submission to
a regulatory agency that includes financial statements, as well as supporting schedules and
commentary which may exist in Excel, Word, or a Financial Reporting document.
Top of Document
General Installation Information
This section includes important information about installing this release of EPM System products. See
the remaining sections for product-specific installation information.
This release is intended for new deployments only. Upgrading or migrating from previous EPM
System releases is not supported. In addition, products from this release are not compatible with
products and applications from previous releases.
The manual deployment of Web applications is greatly simplified, using WebLogic‟s Config
Assistant. Instructions are now provided in the Oracle Hyperion Enterprise Performance
Management System Installation and Configuration Guide; there is no longer a separate manual
deployment guide.
Relational Database as Native Directory-Replaces OpenLDAP as the central storage for native EPM
System user accounts and provisioning information. Unlike previous releases, this release supports
using only a relational database as Native Directory. Native Directory is created in the database
that you configure as the Shared Services database while deploying EPM System components. For
more information, see the Oracle Hyperion Enterprise Performance Management System Security
Administration Guide.
By default, for most products, EPM System Installer installs 32–bit products on 32–bit operating
systems and 64–bit products on 64–bit operating systems for the Web and Services tiers.
EPM System Installer installs 32–bit client products on all operating systems. For Essbase Server
and Essbase Client, EPM System Installer installs both 32-bit and 64-bit components on a 64-bit
operating system. EPM System Configurator configures only 64-bit components on 64-bit operating
systems. For more information, see the Oracle Hyperion Enterprise Performance Management
System Installation and Configuration Guide.
If you are using Oracle database 10.2.0.4+, you must use Oracle database client 10.2.0.2.21+.
The following products have their own installers:
o
Smart View for Office
o
Essbase Excel
o
Disclosure Management
See the Oracle Hyperion Enterprise Performance Management System Installation and
Configuration Guide.
The EPM System directory structure has changed. The default directories are now Middleware
Home and EPM Oracle Home:
pg. 3
A Middleware home consists of the Oracle WebLogic Server home, and, optionally, one or
more Oracle homes, including EPM Oracle home. A Middleware home can reside on a local
file system or on a remote shared disk that is accessible through Network file system (NFS).
The Middleware home location is defined during the first product installation on the
computer. Subsequent installations on the computer use the previously defined location.
The default installation directory is
. The Middleware home location is
referred to as
throughout this document.
o An Oracle home contains installed files necessary to host a specific product, and resides
within the directory structure of the Middleware home. The EPM Oracle home contains files
for EPM System products.
Components of EPM System products are installed in the EPM Oracle home directory under
the Middleware home. The default EPM Oracle home location is
. In addition, common internal components used by the
products are installed in EPM Oracle home. The EPM Oracle home location is defined in the
system environment variable called EPM_ORACLE_HOME. The EPM Oracle home location is
referred to as
throughout this document.
See the Oracle Hyperion Enterprise Performance Management System Installation and
Configuration Guide.
o
EPM Workspace provides a consistent and interactive thin-client environment for working with EPM
content. EPM Workspace is the Web client for the following products:
o Reporting and Analysis
o Planning
o Profitability and Cost Management
o Financial Management
o EPM Architect
o Performance Scorecard
o Calculation Manager
In addition, Oracle Business Intelligence Publisher and Oracle BI EE can be configured to integrate
with EPM Workspace.
The new Foundation Services Web application consolidates to one JVM and includes these Web
applications: Shared Services and EPM Workspace.
The new Reporting and Analysis Framework consists of the Reporting and Analysis Framework Web Application
and the following Reporting and Analysis Framework services:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Global Service Manager (GSM)
Local Service Manager (LSM)
Service Broker
Job Service
Event Service
Repository Service
Usage Service
Logging Service
Session Manager Service
Publisher Service
Authentication Service
Authorization Service
Analytic Bridge Service
Impact Management Services
Search Services
The following SSL configurations are supported and are documented in the Oracle Hyperion
Enterprise Performance Management System Security Administration Guide:
o
Full SSL Deployment (including data access)
pg. 4
o
SSL Terminating at the Web Server
o
SSL Accelerators (offloading)
o
Two-way SSL
EPM System no longer installs or supports Oracle Internet Directory (OID) for use as Native
Directory.
EPM System no longer releases these items:
o
Oracle Hyperion Smart Search Command Line Utility
o
Hyperion Remote Access Module (HRAM)
Translation Support
This release supports non-English languages. The list of supported languages for all EPM System
products is included in the Oracle Hyperion Enterprise Performance Management System
Certification Matrix, posted at
http://www.oracle.com/technology/products/bi/hyperion-supported-platforms.html.
Top of Document
Known Issues
This release has the following noteworthy known issues.
General
Defect
Number
Known Issue
7230134
9454638
The Oracle Hyperion Enterprise Performance Management System Installation
and Configuration Guide states that you can use an underscore during
installation and configuration. However, using an underscore(_) in Shared
Services Web application server machine name or in host names in EPM
System Installer and EPM System Configurator is not supported. Using
underscores in host names may cause errors when starting or connecting to
services running on the improperly named hosts. The documentation will be
updated to reflect this limitation.
9555777
When you run EPM System Configurator for Planning and then Strategic
Finance, the Planning options are displayed when you select Strategic Finance
to configure. Workaround: Restart EPM System Configurator and proceed with
the configuration.
9388673
After you run EPM System Configurator successfully for several products, when
you rerun EPM System Configurator again, the status check boxes of the
configured parent products are still selected.
Workaround: If parent products are selected for configuration and the subtasks
pg. 5
Defect
Number
Known Issue
are displayed as successfully configured, click Next:
If you receive a popup message indicating no tasks to run, you may
ignore the parent status and close the window.
If EPM System Configurator proceeds, then you actually have
incomplete hidden tasks to run; for example: Shared Services
registration or an internal preconfiguration task.
9366584
EPM System Diagnostics, on some machines, exceeds the timeout of 10
minutes to check Financial Management services. A warning message is
displayed. Workaround: Change the EPM System Diagnostics timeout to 15
minutes.
9364854
When EPM System Configurator terminates abnormally before configuring EPM
System products, EPM System Configurator displays the status as complete.
Workaround: Re-run EPM System Configurator and select all the options.
9548316
Windows (64-bit): EPM System Configurator copies the wrong WebLogic IIS
plug-in on Windows (64-bit) operating system.
Workaround:
1. Stop IIS from the IIS console or one of the these:
-World Wide Web Publishing Service
-HTTP SSL
-IIS Admin Service
2. Copy
from
to
3. Copy
from
to all folders under
For example:
9213567,
9164542,
9502270
The WebLogic Server-provided IBM DB2 JAR file that is installed by EPM
System Installer as part of WebLogic Server does not provide support for BLOB
fields in IBM DB2 Release 9.7. Workaround: To get this required support with
IBM DB2 Release 9.7, apply the latest WebLogic patches after you install EPM
System products and before you configure them.
pg. 6
Defect
Number
Known Issue
9487496
EPM System Configurator fails when the WebLogic domain is created outside
EPM System Configurator and EPM System Configurator is running on the same
machine as the WebLogic Admin Server machine for the domain.
Workaround: If you are deploying to an existing WebLogic domain and the
domain WebLogic Admin Server is running on the same machine, shut down
the WebLogic Admin Server before configuring EPM System products. If a
product (for example, SOA) requires the WebLogic Admin Server to be running,
run the EPM System Configurator a second time.
On the EPM System Installer summary window, clicking the Configure button
does not start EPM System Configurator. Workaround: From the Start menu,
select Programs, then Oracle EPM System, then Foundation Services, and then
EPM System Configurator
9402134
8294704,
9360524
Repeating full installations on a system without proper cleanup between them
can cause the system PATH to overflow (maximum length of 1024 characters),
overriding the earliest entries in the variable. Workaround: After any
uninstallation, remove unused entries from system PATH before the next
installation. Otherwise, you may have to manually remove some unused
entries from system PATH and restore other entries; for example:
and
9144638
When you run EPM System Configurator, the SSL listen ports are predefined for
all deployed Web applications and then enabled. They should be in a disabled
state because EPM System Configurator does not perform automatic SSL
configuration. Workaround: Configure SSL separately. For instructions on SSL
configuration, see the Oracle Hyperion Enterprise Performance Management
System Security Administration Guide.
When you run EPM System Configurator and configure Financial Management
Web session timeout, you are directed to specify time in seconds. The time
increment is then set in minutes, not seconds. Workaround: Set the session
timeout in minutes.
8936515
9115765
UNIX: When you run EPM System Configurator and leave the user name blank
for the database, click Next, and then go back to reenter the user name, the
Shared Services Registry tables are not created. Workaround: Exit EPM System
Configurator before reentering the user name.
8840399
When you run EPM System Installer, on the language selection dialog box, the
default selection for the language is wrong. Workaround: Manually select the
correct language.
9006776
AIX: When you install EPM System as the first Oracle product on a machine,
you must run
, located in the extracted assembly folder
as
a root user to create the central inventory for Oracle products.
pg. 7
Defect
Number
Known Issue
9180347,
8841004
In a distributed environment, for an automatic or a manual deployment, the
necessary files between the WebLogic Admin Server and the managed server
do not synchronize.
Workaround: Just after the configuration and before any server startup on the
managed server box, copy
from the WebLogic
Admin Server machine (for example
) to the
folder
where
is the domain defined for the deployment in the
managed server home
Note: If you already started the server, replace the encrypted values in
of the managed server with an unencrypted user name and
password and then restart the server.
8460851
When you run EPM System Configurator and enable SSL listen port on the
Common Settings window and deploy Shared Services, the HTTPS listen port
does not populate the Shared Services server. Workaround: Use the
(
on UNIX) utility to add values to
the Shared Services node in the Shared Services Registry. For more
information, see the Oracle Hyperion Enterprise Performance Management
System Installation and Configuration Guide.
When you run EPM System Configurator and choose the database configuration
option, EPM System Configurator fails if the database name has double-byte
characters. Workaround: Change the database name to non-double-byte
characters.
9123899
8807229
EPM System Configurator displays the wrong error message during SSL support
for JDBC verification. Workaround: Restart EPM System Configurator.
8702291
In EPM System Configurator, the Web server task is listed when no Web
applications or Web servers are installed. Workaround: Ignore the listing
because you do not have to configure the Web server on the services tier.
8255440
After a configured Shared Services database is deleted and then recreated, EPM
System Configurator stops when you attempt to configure the new database.
Workaround: Do not delete the database in the middle of configuration. If you
have already deleted the database, stop and restart EPM System Configurator.
8481513
When EPM System Installer installs files, the progress bar stalls at 99% for
over a half hour. Workaround: EPM System Installer appears to freeze while
copying over large amounts of help files. It will complete the task, but on some
slow systems, it might take an hour. Know that if you cancel the installation,
help files for EPM System Uninstaller may not be available.
8599271
After the IIS listen port is changed, the Web server configuration task displays
the default port. Workaround: Disregard the port displayed in the Web server
configuration task. The listen port is changed correctly.
pg. 8
Defect
Number
Known Issue
7698703
If EPM System Configurator is running and you click Cancel, this error message
is displayed: “This action cannot be canceled….” Workaround: Either shut down
the command line window or open the Windows Task Manager and end the
Java process.
8284282
EPM System Configurator does not prompt for database information if the
database is not running. Workaround: Verify that your database is running
before you start EPM System Configurator.
8219145
On non-Windows systems, when installing in console mode, you can select to
install Windows-only components and proceed, but the components are not
installed because they are not supported on non-Windows platforms.
8226337
Windows (64-bit): The following error message is displayed during installation
and configuration: “The value for the attribute is not valid: progid.”
Workaround: You can ignore this error message, click OK, and continue.
6889688,
8291337
If there is not enough free disk space for an installation, EPM System Installer
displays an error message, “
”,
at the bottom of the Summary window. Workaround: Ensure that there is twice
as much space as the amount shown in Oracle Hyperion Enterprise
Performance Management System Installation Start Here.
8399934,
7485611
64-bit: When installing in console mode, when Typical mode is selected, the
screen has both 32-bit and 64-bit versions of the components selected.
Workaround: Select only one type (32-bit or 64-bit).
8487819
When you use EPM System Configurator to reconfigure a database, the
Advanced Options window is not displayed. Workaround: Use the Shared
Services Registry editor to edit the database connection properties:
1. On a machine hosting the 11.1.x EPM System software, go to
and run the following
command:
2. Note the Component ID for the database connection you want to edit, and
the component property names and values you want to update.
3. To update the component property, go to
and run the following
command:
where
is the component's ID you found when you viewed the
component hierarchy,
is the component property name
you want to update, and
is the new value for the component property.
pg. 9
Defect
Number
Known Issue
9170259
When your run EPM System Configurator and choose the database
configuration option, if the server name is incorrect, the Advanced Option
window is not displayed. Workaround: Shut down EPM System Configurator.
Restart EPM System Configurator, choose the database configuration option,
and enter the correct server name.
7204985
For all supported databases, EPM System Configurator does not correctly
process the
parameter on the Advanced Options window.
Workaround: Enter the name (case-sensitive) as
.
6689418
Linux: When you configure products in console mode, all products are not
selected by default. Workaround: Manually select all products needed for
configuration.
7459916
If a system is not completely cleared of files, performing an overinstall causes
EPM System Configurator to not show database configuration panels for all
products. Workaround: Uninstall and select the option to delete files and
directories. Then, remove the
file found in
and install again.
7127257,
7188590
You must use native authentication with Microsoft SQL Server instead of
Windows authentication. Both the Oracle Hyperion Enterprise Performance
Management System Installation and Configuration Troubleshooting Guide and
the Oracle Hyperion Enterprise Performance Management System Installation
Start Here state to use Windows authentication.
Oracle HTTP Server
9284682
On Windows 2003 SP2 64-bit, EPM System Configurator fails to start Oracle
HTTP Server (OHS). Startup fails because Oracle HTTP Server only supports
Oracle database client Version 11. Workaround: If using Oracle database
10.2.0.4+, you must use Oracle database client 10.2.0.2.21+.
9023087
EPM System Installer cannot install Oracle HTTP Server (OHS) on a machine
having 1015 MB total physical memory. Workaround: Ensure that you have
1024 MB total physical memory.
9439616
If WebLogic Server is installed outside of EPM System and
folder is missing under Middleware Home (For example: Java Required Files
(JRF) is not installed on the machine) the
folder does not get
installed with EPM System Installer. Workaround: Install Oracle HTTP Server on
another system and copy the folder
/
over.
pg. 10
9480396
If EPM System Installer fails to install Oracle HTTP Server (OHS), the Oracle
HTTP Server reinstall option is not available. Workaround: Review the Oracle
HTTP Server and EPM System Installer log files to determine why Oracle HTTP
Server failed to install.
Note: A common reason for an incomplete Oracle HTTP Server installation or
configuration is a missing prerequisite on the Oracle HTTP Server machine. See
the “Oracle HTTP Server Installation Prerequisites” section in the Oracle
Hyperion Enterprise Performance Management System Installation and
Configuration Guide.
9499491,
9251326
If you have already installed Oracle HTTP Server (OHS) in the same Middleware
Home to which you are installing EPM System, EPM System Installer does not
install Oracle HTTP Server, and does not lay down required static content files.
Workaround: To get the required static content for all Web applications, after
you run EPM System Installer:
1. Create a file (Windows:
UNIX:
directory; for example:
)
,
in the EPM System Configurator
.
2. Copy the Windows or UNIX script from below for extracting the static files
into the newly created BAT (SH) file.
3. In the script, locate the line
substitute <
EPM System Installer script.
with the actual installation location of the
4. Run the script. The script puts the zipped static content for all Web
applications in the same
folder that
is normally copied by EPM System Installer.
5. Run EPM System Configurator and select the Web server task.
Windows Script for Extracting the Static Files.
:
pg. 11
UNIX Script for Extracting the Static Files.
:
pg. 12
Uninstalling
9446557
Windows: EPM System Installer may fail on Windows when you reinstall after
uninstalling a previous EPM System installation. Workaround: After you
uninstall, reboot the Windows machine before you reinstall to the same folder.
8926560
The WebLogic Uninstaller does not launch from EPM System Uninstaller.
Workaround: Manually run the WebLogic Uninstaller.
9068958
EPM System Uninstaller does not stop WebLogic Node Manager processes.
Workaround: Manually stop all WebLogic Node Manager processes.
pg. 13
7376954
EPM System Configurator does not show the database configuration panel if the
Shared Services Registry database is dropped. Workaround: Delete the
file from
and rerun EPM System Configurator.
7489828
UNIX: EPM System Uninstaller leaves some files under the product installation
location. Workaround: Perform an overinstall.
7492265
When you uninstall an EPM System component, the EPM System Uninstaller
also uninstalls the EPM System product. For example, uninstalling Interactive
Reporting removes Financial Reporting and Web Analysis deployments and
Financial Reporting services.
Translation Support
9319870
In Japanese, when you run EPM System Configurator and the Shared Services
Registry database user name and password use double-byte characters
(hieroglyphs), the Foundation Services Web server configuration fails.
Workaround: Change the Shared Services Registry database user name and
password to non double-byte characters.
9436054
7678519,
8286979,
7812803
You must install and configure EPM System products in English. When you are
using EPM products on a Turkish machine, set your Web browser language to
Turkish (tr). See 9436054 in the Planning section.
7812803
Linux-WebLogic-Turkish: When manually adding the LANG environment
variable to
with the WebLogic-Turkish
combination, you must also add
"
"
in
where
is the name of the application and the
setting to start EPM System products. You might also install a
generic installation on a WebLogic server, using Sun JDK in case the Turkish
locale is used on Linux (Oracle or RedHat).
Top of Document
Foundation Services
Shared Services
9526241
You cannot start Shared Services from Windows services.
Workaround: Update the Windows registry:
1. In the Windows registry, locate the following key:
2. Under
increase the
add a new
,
by one and
with the value
.
3. Restart the Shared Services server from Windows services.
8205578
If you uninstall Shared Services, not all configuration tasks appear in EPM
System Configurator. Workaround: Reinstall an existing EPM System product
and restart EPM System Configurator.
pg. 14
Performance Management Architect
9485496
The Performance Management Architect start menu, (Start, then Programs,
then Oracle EPM System, then Foundation Services, and then Performance
Management Architect) URL
displays the
following error message: “
.”
Workaround: Edit the start menu URL to use the Web server port instead of the
application server port.
9446072
When you run EPM System Configurator for Performance Management Architect
database and interface data source configuration, if you are using an SQL
Server named instance, you must specify a fixed port.
6571231
When an existing interface table data source is edited, and you select
to
, the dialog box should indicate which
tables will be deleted.
Smart View
9111267
In the “Installing Smart View” section of the Smart View User’s Guide, step 6
should be changed from
“6. Visual Explorer licensees only: To make Visual Explorer available to
users, in the following location, rename
to
:
”
to
“6. Visual Explorer licenses only: To make Visual Explorer available to
users, copy
to the following location and rename it
to
:
”
9526875
Smart View Client does not connect to Shared Services provider URL. The
connection validation time takes longer than the default Internet Explorer
timeout. Workaround: Reset the Internet Explorer timeout:
1. Click Start and then Run. Type
, and then click OK.
2. Locate and then click the following key in the Windows registry:
3. On the Edit menu, click New, and then click DWORD Value.
4. Type
, and then click ENTER.
5. On the Edit menu, click Modify.
6. Type a timeout value (in milliseconds), and then click OK. For example, to
set the timeout value to 2 minutes, type 120000.
7. Restart Internet Explorer.
You may also need to restart Excel to update the new timeout setting.
9532385
Windows (64-bit): You must install Desktop Experience on Windows Server
2008 before EPM System Installer installs Smart View.
pg. 15
9355339
When running Smart View in a German locale, an error message is displayed , “
objekt Smart View Extension Activator Konnte nicht erstellt
werden....". Workaround: Check that .NET is installed properly.
9195279
Windows 2003: When you run EPM System Installer, Smart View fails to install
MSXML6 module on Windows Server 2003 R2, and this causes Excel 2003 to
fail when you try to open the Options dialog box. Workaround: Manually run
.
8926962
If you get an error that says “Could not open…” in the Windows event viewer,
Windows permissions are not properly set. Even if you are logged in as the
Administrator for Windows XP or 2003, you do not have rights to modify
Windows registry keys. Workaround: For suggestions on setting the
permissions, see the IBM documentation: http://www01.ibm.com/support/docview.wss?rs=663&context=SSGSG7&uid=
swg21164242&loc=en_US&cs=UTF-8&lang=en
9360477
When an external drive is connected, EPM System Installer installs Smart View
on the external drive with no option to install on the local C:\ drive and the last
used date is not updated. Workaround: Disconnect the external drive while
installing Smart View.
8225209,
8304976
If you install Smart View on a machine with no EPM System products installed,
the Smart View installation fails to install properly. Workaround: Install Smart
View again.
Top of Document
Essbase
Essbase Server
9504924
The shortcut to Visual Explorer is wrong. Workaround: Edit the following
Essbase Visual Explorer shortcut:
Change it to
.
9492623
On Linux or UNIX, when you start Essbase in OPMN mode, Essbase cannot
connect to the Oracle BI Apps server using the Oracle BI Apps ODBC driver.
Workaround: To integrate with Oracle BI Apps ODBC driver (10.1.3.4) on Linux
or UNIX platforms:
Start Essbase Server in non-OPMN mode, with the following script:
2. After you finish Essbase cube deployment, or data loads with Oracle BI Apps
data source, restart Essbase in OPMN mode.
Note: Do not start Essbase in non-OPMN mode unless you need to for this
specific use case (Linux or UNIX using Oracle BI Apps ODBC driver).
pg. 16
9357107
On UNIX, OPMN management of Essbase and failover clustering is not
supported if you are using Oracle BI EE as a data source for Essbase.
9215291
When you run EPM System Configurator and select the custom configuration
option to configure Essbase on a cluster of the first server, the Essbase custom
configuration task fails. Workaround: Run EPM System Configurator with the
custom configuration task again.
9460789
After you overinstall Essbase into the same directory, OPMN is not configured
for starting Essbase. Workaround: Before overinstalling to the same directory
(
), delete or rename the
Essbase directory.
8595246
After you overinstall Essbase, the Essbase global application does not exist in
Shared Services. Workaround: Use Administration Services to externalize
native users from Essbase.
8226835
You must edit the PATH environment variable and verify that the Essbase client
path is before the Integration Services
path.
For example:
should come before
.
Administration Services
7461473
After you modify the Essbase Administration Services port, the menu command
Assign Access Control is no longer displayed in Shared Services. Workaround:
Log on to Essbase Administration Services Console, and use the
command on the appropriate Enterprise View. Navigate to Essbase Servers,
then HOSTNAME, and then the Applications item.
Integration Services
7253757
On Windows 2003 SP 1, after installation, EPM System Installer uses Windows
services to start and stop the services for Integration Services. Sometimes
after the services are stopped with the Windows services console,
still runs. Workaround: Manually stop the
and
processes.
Top of Document
Reporting and Analysis
General
9232850
starts both Reporting and Analysis Framework Web
application and Reporting and Analysis Agent. The dependency to start both
should be removed. Workaround:
To start Reporting and Analysis Agent, run
To start both Reporting and Analysis Framework Web application and
pg. 17
Reporting and Analysis Agent, run
9537050
To access Financial Management data sources on 64-bit Windows machines
running the Financial Reporting Web application, you must prefix the entry to
the Env2, JVMOption13, and JVMOption17 entries in the Windows registry
under the following key:
Update the location as needed if your
is not in
.
Financial Reporting
9446414
You cannot start a cloned instance of Financial Reporting Web application.
Workaround:
After you clone a managed server in WebLogic Admin Console and before you
start the cloned server:
1. Open the following file and add the new managed server name to the
EPM_SERVERS list:
is the domain defined for the deployment in the
managed server home
2. Copy the
,
,
, and
scripts for the cloned
server, rename the scripts, and then update them properly to add the new
managed server name. For example, if you cloned the Financial Reporting
managed server to a new managed server name; for example:
, you would rename the following files under
folder, where :
]-For automatic
deployment;
For manual
deployment;
For the startup file
For the shutdown file
3. You can now start and stop the cloned server from the WebLogic Admin
Console.
Production Reporting
9320142
Production Reporting does not run on AIX 6.1 32-bit. Workaround: To run
Production Reporting on AIX, you must change to 64-bit.
7165746
Instead of using the Shared Services Registry to store URLs, the Production
Reporting portlet uses
when you deploy the Reporting and
Analysis Framework Web application. Workaround: Update the following portlet
values in the EPM Workspace Web application
:
-The EPM Workspace Web server machine host name.
-The EPM Workspace Web server machine listen port.
The default value is 19000.
pg. 18
Dashboard Development Services
7117352
After Dashboard Development Services is installed on Windows Vista, the
folders under the EPM Oracle home directory are read-only. Workaround: Add
the domain user or group to the EPM Oracle home folder security, and assign
the user write permissions.
Top of Document
Financial Performance Management Applications
Planning
9436054
If you are using Turkish, before initializing Capital Asset Planning, Workforce
Planning, or Public Sector Planning and Budgeting, you must set your Web
browser language to Turkish (tr). If you do not, English, not Turkish, members
are populated during initialization.
Financial Management
9539535
In a clustered environment, after you run EPM System Configurator, Financial
Management Web services do not start. Workaround: Manually point the three
Java Message Service (JMS) structures (module, server, and file store) to the
same managed server or cluster as Financial Management Web Services.
9556032
When you run EPM System Configurator and add a second Financial
Management cluster, the “Register Application Servers/Cluster” task fails.
Workaround: Run Financial Management Configuration Utility for cluster
definition.
9536760
EPM System Configurator fails when you install Financial Management Web
services on a machine separate from Microsoft .NET Framework. Workaround:
Install Financial Management Web services and the .NET Framework application
on the same machine.
9534044
After you run EPM System Configurator to configure Financial Management,
you cannot connect from Smart View to Financial Management.
Workaround:
1. Re-run EPM System Configurator.
2. Select the Configure Financial Management Web Server task.
3. On the Web server task window, select Configure IIS to Enable Smart View
Provider.
4. Fill in the Enable Smart View Provider window.
9509373
After EPM System Installer installs Financial Management on a 32-bit or 64-bit
machine, the email alerts from Financial Management do not work because
EPM System Installer did not register Microsoft .NET Framework
.
Workaround: Register
locate and run the correct register command on your system:
32-bit:
64-bit:
pg. 19
8618318
The Web server configuration does not recognize a lowercase
(for
example: hfmofficeprovider123 or hfm123) name in the Financial
Management Web server Web directory registry. Workaround: When you
configure Financial Management with EPM System Configurator, on the
Configure Web Server window, for the Virtual Directory Name, use only the
default name
even though EPM System Configurator lets you change the
value. If you enter a different name, EPM Workspace will not recognize it.
8560293
Microsoft Windows 2003 SP2: In some Windows 2003 SP2 installations, clients
may experience “Access Denied” issues while connecting from Financial
Management or Financial Reporting. The client machine event log displays a
“General access denied” error message. Workaround: Add the following
value to the Windows registry if it does not already exist:
1. In the Registry Editor, under
new
, add a
value with the name
2. Right-click
.
and click Modify.
3. For the Value Data, enter 1, and click OK.
Note: This setting disables the bind-time negotiation and multiple-transfer
syntax negotiation.
4. Exit the Windows Registry Editor and restart the computer.
Top of Document
Financial Close Management
9506656
After EPM System Installer installs Financial Close Management, there is a
missing template for Oracle JRF Web Service Asynchronous Services.
Workaround: During deployment, select the following products:
Oracle SOA Suite
All common Oracle components including:
Oracle Enterprise Manager
Oracle WSM Policy Manager
Oracle JRF Web Services Asynchronous services
Oracle JRF
For more information on required selections for Financial Close Management,
see the “Configuration Prerequisites” section in the Oracle Hyperion Enterprise
Performance Management System Installation and Configuration Guide.
9527499,
9477699
When you run EPM System Configurator to reconfigure the Financial Close
Management database, you cannot use the “Drop and Create” option.
Workaround: Drop the database artifacts using the Database console or
command line and reconfigure Financial Close management to a new database.
Accessibility Considerations
It is our goal to make Oracle Products, Services, and related documentation accessible to the disabled
community. Assistive technologies apply only to Windows operating systems and to Microsoft Internet
Explorer.
pg. 20
Top of Document
Documentation Updates
Accessing Hyperion Product Documentation
The most recent version of each Hyperion product guide and online help is available for download
from the Enterprise Performance Management System Documentation Library on the Oracle
Technology Network (OTN) Web site:
http://www.oracle.com/technology/documentation/epm.html
Deployment-related documentation is available on both Oracle Technology Network (OTN) and
the Oracle E-Delivery Web site:
http://edelivery.oracle.com/EPD/WelcomePage/get_form
Information about system requirements for EPM System products is available in a spreadsheet
format in the Oracle Hyperion Enterprise Performance Management System Certification Matrix.
System requirements are no longer part of the Oracle Hyperion Enterprise Performance
Management System Installation Start Here.
This matrix is posted on the Oracle Fusion Middleware Supported System Configurations page on
OTN (listed in the Oracle Business Intelligence product area):
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Documentation Updates
The
included in the
is content now
8687917-The Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide has
corrected the path for the font directory. The corrected path is
Copying and Pasting Code Snippets from PDFs
When you cut and paste code snippets from a PDF file, some characters can be lost during the paste
operation, making the code snippet invalid.
Workaround: Cut and paste from the HTML version of the document.
Top of Document
pg. 21
Defects Fixed in this Release
Defect
Number
Defects Fixed in this Release
No
Defect
Number
Based on this Microsoft support link, http://support.microsoft.com/kb/899148, the
issue is fixed in 2003 SP2.
Windows 2003 SP1: You may receive an "Access Denied" message while
connecting from Financial Management Win32 or Financial Management Web.
The client machine event log shows: “DCOM got error „General access denied
error‟ from the computer
, when attempting to
activate the server.” Microsoft has provided the following workaround to
resolve a code issue with its RPC layer by disabling bind time negotiation for
security context multiplexing.
No
Defect
Number
Planning: To avoid performance issues during installation, turn off any screen
savers that are running on your Planning servers.
6587858
The
script does not display when Shared Services
User Interface is deployed to WebLogic on Solaris.
6588404
After you install, configure, and start Financial Reporting Studio, you get the
error message, “You are not authorized to use this functionality. Contact your
administrator.” The path is now correct in the Oracle Hyperion Enterprise
Performance Management System Installation and Configuration
Troubleshooting Guide.
is missing from the PATH variable.
6591682
6640727
Solaris (64-bit): Silent configuration may return an error if the
variable is set incorrectly.
6844519
EPM System Configurator does not configure Shared Services against Oracle
10G RAC.
7138268
You cannot change the Shared Services database directly in EPM System
Configurator.
7151093
For Oracle databases, you cannot define an index tablespace for the Shared
Services Registry database. If this is required for your deployment, manually
edit the Oracle database scripts for Shared Services supplied with the Shared
Services installation in
.
7335453
German: After all EPM System products are installed, only Financial Data
Quality Management is added to the Start menu. Workaround: Use the start
scripts in
.
7359973
Performance Management Architect requires Microsoft .NET Framework,
specifically 2.0.50727. EPM System Installer checks to see if .NET version 2.0.x
is on the system. If .NET 2.0.x is found, where x = any maintenance release,
then EPM System Installer leaves .NET as is and Performance Management
Architect installation fails. If .NET is not detected, then EPM System Installer
adds version 2.0.50727.
7366501
On a Solaris platform, application migration may fail, and the error message
“File
not found” is displayed in the Planning
pg. 22
Defect
Number
Defects Fixed in this Release
logs.
7390473
On Windows, EPM System Uninstaller stops services but does not delete them.
7391340
After you configure a set of applications on Oracle Application Server with
Oracle HTTP Server 1.3, and configure the Workspace Web server to use Oracle
HTTP Server version 2, you must redeploy each of the applications.
7420003
EPM System Uninstaller does not stop the Essbase Studio server.
7427010
When you uninstall EPM Workspace, the Windows service for the agent
component is removed. However, a subsequent reinstall and configuration does
not re-add the agent component.
7447720
On UNIX,
launches Mozilla with .
7462096
shows
in the console and
in its address.
If Shared Services deployment to WebLogic fails, modify
and append JAVA_OPTIONS variable with
option.
7490615
After Shared Services is installed, two applications and two Essbase Studio
servers are displayed on the same system.
7565671
When you customize the port for IIS, the EPM System Diagnostics report for
Strategic Finance Web service can be a false report.
7624268
When you start Web Analysis with other products, Web Analysis does not start.
7709447
EPM System Installer does not determine the state of the Smart View for Office
installation correctly. If you have trouble starting Smart View, look at
for more information.
8215018
When EPM System Configurator configures Financial Management, the
application cluster fails.
8226957
If EPM System Configurator configures one database type, you cannot use EPM
System Configurator to configure a different database type. The Shared
Services Registry still points to the first database.
8302662
Installation of 11.1.1.1 is unstable when the files are on a shared network
drive.
Need to provide an EPM System silent installation for Essbase Excel Add-in.
8343351
8361078
There are Java differences that cause Financial Reporting to error in Internet
Explorer 8.
8397507
You cannot to register a server or cluster when using the encrypted
8449376
EPM System Diagnostics incorrectly reports the status of Shared Services Web
application.
8508873
When you install System 9.3.1 on two servers and attempt to replicate all
services, including the repository, DAS, and Reporting and Analysis, you
.
pg. 23
Defect
Number
Defects Fixed in this Release
encounter problems when you attempt to replicate both the Service Broker and
DAS services on the second server.
8509441
EPM System Diagnostics report "failed" after changing the admin password in
Shared Services.
8516033
When you deploy to Oracle Application Server, EPM System Configurator
displays the path to Apache instead of Oracle Application Server.
8519311
When you run EPM System Configurator to configure a database and the "force
encryption" option for network traffic is enabled on the database server, EPM
System cannot connect to SQL Server 2005 database.
8571190
When Financial Reporting is manually deployed, there are no manual
CLASSPATH edits required for this release. Financial Reporting uses
to set the CLASSPATH.
8575120
You cannot apply patch 7711140 (for OPatch) if the host name of the machine
contains uppercase letters.
8599023
After you overinstall Shared Services, Administration Services and Essbase
Studio are listed twice in the Shared Services Console.
8612008
When you run Essbase Client in Japanese, the icons in the Start menu are not
displayed.
8612622
In Russian, when EPM System Installer encounters
as a translation
character set, EPM System Installer reverts to English messages.
8613322
Extended ASCII characters and multibyte characters are not supported in the
Database user name for Oracle database.
8635538
Web application entries are missing from the Windows registry.
8638156
EPM System Diagnostics does not check the startup of Web applications and
does not enforce some key dependencies.
8666155
In Japanese, after you configure Essbase, you may get an Essbase Agent task
processor error message in
.
8677219
With WebLogic, when you run EPM System Configurator and configure all the
products at the same time, Provider Services fails to deploy.
8693661
EPM System needs to support JRE 1.6.13 or greater.
8704007
When you overinstall all products except Shared Services, in Shared Services,
registration for Essbase Studio fails.
8704742
In a distributed environment, when EPM System Core Services and Financial
Reporting server services are installed on separate machines, when you logon
from Hyperion Reports Studio to a Financial Reports server, a license server
error message is returned and the logon fails.
8807786
Essbase does not externalize to Shared Services during configuration.
8883991
The EPM System Configurator does not register more than one cluster.
pg. 24
Defect
Number
Defects Fixed in this Release
8889575
Provide a 32bit Financial Reporting Client installer for a 64-bit operating
system.
8946969
In the Oracle ® Enterprise Performance Management Workspace, Fusion
Edition Administrator’s Guide, the
logger file has the wrong
location path.
More detail is needed regarding Provider Services manual deployment.
9002574
9041203
9072414
Linux: Some Linux kernels direct the
log to a command window and not
to the
.
Essbase cannot register with Shared Services unless both products are on the
same server.
9096150
EPM System Configurator does not set up Oracle or Informix non-wire drivers.
9151558
Essbase cannot start in the background due to an error in the
script.
9178816
When you run EPM System Configurator, the .
file is created
in the home directory of the user that installed the product. However, if EPM
System Configurator is run with a different user, it cannot find
.
.
.
.
contains information written by EPM
System Installer and read by EPM System Configurator for information needed
on what was installed and the language selected.)
9195028
When you install Essbase Integration Services, EPM System Installer does not
create the
directory.
9324504
After installing Essbase 11.1.1.3.0 client, the file
is missing from
. This file is needed to
build the Perl module.
9471284
When you uninstall the Excel Spreadsheet add-in, the Start menu item points
to the wrong shortcut.
8640772,
8560023
On the Product Options configuration panel in EPM System Configurator, the
Configure Product Options status and Configuration status remain as Pending
instead of changing to Configured, even after successful configuration.
8629354,
8637320
For ERP Integrator‟s Start menu, folders, and error messages,
instead of
.
8896228,
8669985
EPM System Uninstaller does not clear information from the Shared Services
Registry.
8766710,
8826066
It is not possible to setup Shared Services with an active-active failover.
9415564,
9347334
If you change the Native Directory user “admin” password and then run EPM
System Diagnostics, the EPM System Diagnostics report shows several failures.
7377763,
7653696,
7359011
If applications are deployed on WebLogic and started by EPM System
Configurator, the computer freezes and needs a hardware reboot.
is listed
pg. 25
Defect
Number
Defects Fixed in this Release
8780713,
9170833,
8411629
Essbase Client should have a standalone installer outside EPM System Installer.
Copyright © 2010, Oracle and / or its affiliates. All rights reserved.
http://www.oracle.com
pg. 26
">