DTS DataPRO 1.3 Data Acquisition System User’s Manual
광고
광고
DataPRO
User’s Manual
10920-04010-MAN (Rev. 2)
Version 1.3
December 2016
© Diversified Technical Systems, Inc. - All Rights Reserved
DataPRO 1.3
User’s Manual
Table of Contents
December 2016
Sensor Database: Add, Import, Export, Edit, Refresh, Delete, Delete all ...................... 25
support.dtsweb.com
ii
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
How to Back-up the Centralized (SQL Server) DataPRO Database ............................ 130
How to Restore the Centralized (SQL Server) DataPRO Database ............................. 135
Instructions for Using SQL Server for the DataPRO Database .................................... 139
Instructions for Adding a Windows User as a SQL Server Login ................................. 140
support.dtsweb.com
iii
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
DTS Support
December 2016
DTS systems are designed to be reliable and simple to operate. Should you need assistance,
DTS has support engineers worldwide with extensive product knowledge and test experience to help via telephone, e-mail or on-site visits.
The best way to contact a DTS support engineer is to submit a request through the DTS Help
Center web portal ( support.dtsweb.com
). You must be registered
( support.dtsweb.com/registration ) to submit a request ( https://support.dtsweb.com/hc/enus/requests/new ). Registration also enables access to additional self-help resources and non-public support information.
This manual supports the following products:
10920-04010: DataPRO Software
support.dtsweb.com
4
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Introducing DataPRO
December 2016
DataPRO is a comprehensive software application that supports SLICE PRO, SLICE
MICRO/NANO, and legacy TDAS PRO and TDAS G5 hardware. DataPRO allows seamless integration of SLICE and TDAS systems in a single test setup. Suitable for both small facility and multi-user lab settings, DataPRO includes extensive diagnostics and hardware checks, customizable user interface with access control, support for sensor templates and group templates, and off-line test builder and multiple data export formats.
Please contact support.dtsweb.com
for the latest software information.
PC Requirements
DataPRO is a Windows®-based program. Minimum PC specifications are:
Windows Vista, 7, 8 or 10. 32- and 64-bit versions are supported.
Microsoft .NET 4.5.
Multicore processor.
4 GB RAM minimum; 8 GB RAM recommended. (More RAM is important for high channel count and longer/higher sample rates.)
250 MB disk space for software plus additional storage for test data.
1024 x 768 minimum screen resolution.
Software Installation
1. Locate the installation files (e-media or downloaded from the Help Center).
2. Run the setup file to install DataPRO.
3. Follow the prompts to:
- Change the install directory if desired, and
- Install drivers if necessary. You may be asked several times to permit installation of drivers.
Unless you change the location during installation, DataPRO software is located in
C:\DTS\DataPRO\ and organized in folders by version number. Data files are located in
C:\DTS\DataPRO\Data and organized in folders by test.
Note: If you are installing a new version of DataPRO, see page 95 for additional information.
support.dtsweb.com
5
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
4. When installation is complete, open DataPRO using the desktop icon or Start menu.
Note: Windows may ask you to reinstall the hardware driver each time you connect a SLICE
Stack to a different USB port.
5. Log in as the Administrator (Admin). Admin password = DTSAdmin
- Features and functions available to all other users are controlled by the DataPRO
Administrator (see section Manage Users). Remember to change this password as
soon as possible.
support.dtsweb.com
6
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Data Collection Concepts
December 2016
SLICE and TDAS DAS are standalone data loggers. Once the DAS is armed, the PC can be disconnected if desired. (Power must remain connected, however.) After receiving a
Start Record or event (trigger) signal, the DAS autonomously collects data, storing it to memory with no user interaction. After the test, the user can reconnect the PC to download the data.
DataPRO includes a realtime mode that allows the user to check channel inputs on an oscilloscope-style screen. Note: DataPRO cannot simultaneously display the data while the
system is recording.
Three data collection modes are supported: Circular Buffer, Recorder and Hybrid.
Circular Buffer Mode
In Circular Buffer mode, the user can program the DAS to record pre- and post-trigger data.
Time Zero (T=0) is marked when the trigger signal is received.
Recorder Mode
Recorder mode starts when a Start Record signal is received and continues for the time specified in the test setup. If a trigger signal is received some time after the Start Record, this is marked as T=0.
Hybrid Recorder Mode
Hybrid recorder mode starts when a Start Record signal is received, continues until the unit receives a trigger signal, after which it records for the post-trigger time specified by the host software. The trigger signal marks Time Zero (T=0) and all data recorded is available for download. Note: This mode is not available in SLICE PRO Gen2 hardware.
Sampling Rates
SLICE and TDAS equipment support different sampling rates. For this reason, DataPRO will enable only the sampling rate(s) that all equipment can support. Additionally, TDAS G5 DAS,
TDAS PRO TOM and all SLICE DAS will record all channels even if they are not programmed, so these unused channels must be included when calculating recording time.
support.dtsweb.com
7
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Number of
Channels*
SLICE MICRO/NANO
Base
Maximum Sampling Rate (per channel)
SLICE MICRO/NANO
Base+
SLICE PRO SIM
(Gen2/Gen3)
3
4
6
9
12
15
120,000 sps
60,000 sps
40,000 sps
30,000 sps
24,000 sps
500,000 sps
400,000 sps
300,000 sps
200,000 sps
200,000 sps
1,000,000 sps
1,000,000 sps
1,000,000 sps
500,000 sps
500,000 sps
18
21
20,000 sps
17,000 sps
200,000 sps
200,000 sps
500,000 sps
24 15,000 sps 200,000 sps
* All channels are recorded even if they are not programmed.
** Records current and voltage for each channel (i.e., records 8 channels).
Maximum Sampling Rate (per channel)
Number of
Channels
4
8
TDAS G5 DAS*
TDAS PRO SIM
(16 MB)
38,000 sps
TDAS PRO SIM
(4 MB)
38,000 sps
32 100,000 sps
* All channels are recorded even if they are not programmed.
** Records current and voltage for each channel (i.e., records 8 channels).
TDAS PRO TOM*
38,000 sps**
How to Calculate Maximum Recording Time
SLICE MICRO/NANO, SLICE PRO, TDAS G5 and TDAS PRO have different data storage capacities.
SLICE MICRO/
NANO Base
Data
Capacity
6.48 GB
Samples
Available *
3,240,000,000
* 1 sample = 2 bytes
SLICE MICRO/
NANO Base+
15 GB
7,500,000,000
December 2016
SLICE PRO TOM
1,000,000 sps**
SLICE PRO SIM
(Gen2/Gen3)
15 GB
SLICE PRO
TOM
15 GB
SLICE PRO
Trig Dist
15 GB
7,500,000,000 7,500,000,000 7,500,000,000
TDAS G5 DAS*
TDAS G5 DAS* TDAS PRO SIM* TDAS PRO SIM*
TDAS PRO TOM
Data
Capacity
100 MB (RAM) 50 MB (RAM) 16 MB**
Samples
Available
50,000,000 25,000,000 8,000,000
* Contact DTS if you need help determining the capacity of your unit.
** Flexibly allocated to programmed channels only.
4 MB**
2,000,000
16 MB
8,000,000
support.dtsweb.com
8
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
To determine the recording time possible, use the equation below:
December 2016
Samples available
Sampling rate (sps) X number of channels
= number of seconds
Example 1: 10,000 sps using a 9-channel SLICE NANO/MICRO stack
3,240,000,000
10,000 X 9
= 36,000 sec (10 hours)
Example 2: 25,000 sps using an 18-channel SLICE PRO SIM
7,500,000,000
25,000 X 18
= 16,667 sec (4.63 hours)
Example 3: 20,000 sps using 6 channels of a 16 MB TDAS PRO SIM
8,000,000
20,000 X 6
= 66 sec
SLICE PRO Circular Buffer Limitations
Due to the nature of flash memory, the system cannot be armed in Circular Buffer mode indefinitely. To determine the maximum time available in Circular Buffer mode, use the equation below:
0.8
recording time = maximum time available in Circular Buffer mode
Example:
0.8
8,333 sec = 6,666 sec (111 minutes)
In this example, the test must occur within 111 minutes, after which time the unit stops recording data.
support.dtsweb.com
9
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Navigating DataPRO
December 2016
DataPRO’s user interface uses tiles color-coded by function. In general, proceed from left to right, top to bottom, when on the main Home screen.
DataPRO Main Home Screen (includes ISO-specific features)
Within tiles, additional menus are available along the left side (nav steps), along the top (page buttons), or both. In general, proceed from top to bottom when using the nav steps. If there are no nav steps, use the functions at the top of the screen. Use the Done button to return to the tile home screen or the main Home screen. DataPRO will alert you if you attempt to abandon any unsaved changes.
support.dtsweb.com
10
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Page buttons
December 2016
Return to
Home screen
(main or tile)
Nav steps
When viewing tables, sorting and filtering options are available. You can also move and resize columns if desired.
Click column heading to sort table
(arrow above title indicates ascending or descending)
support.dtsweb.com
Filtering is available by clicking the drop-down menu in the column heading
11
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Before
After (columns resized and reordered)
Up and down arrows indicate menus that can be expanded or collapsed. All fields in red must be completed.
Required field
Expanded menu
Collapsed menu
When viewing test data, all available channels are listed on the left side. The action buttons offer on-the-fly customizable data views, filter options, and the ability to modify a channel.
(These features are explained in more detail beginning on page 77.)
support.dtsweb.com
12
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Action buttons
support.dtsweb.com
13
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Using DataPRO
December 2016
There are three operational modes available: ISO, No ISO, and Transitional. DataPRO installs with ISO mode active. The more obvious feature differences are found in the Prepare tile group; other differences are found within other tiles across the groups. (Note: depending on user access, your screens may be different.)
ISO No ISO
“Group Templates”, “Customer Details”, “Lab Details”, "Engineer details", and “Custom
Channels” are only available in ISO mode. To bypass these features, go to “System
Settings
ISO Settings”. Check “Support Non-ISO Mode” and select “No ISO”.
support.dtsweb.com
14
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
To get up and running quickly, complete the following steps to collect data:
December 2016
1. Add Hardware
(DAS and sensors)
2. Prepare sensor group and
test setup
3. Record test event
and download data
Quick Start Steps
While this may be the quickest way to begin testing, we highly recommend you implement a documented test procedure and use the diagnostic functions available to provide you with the most reliable and consistent testing experience.
support.dtsweb.com
15
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Hardware
December 2016
The tiles in the Hardware group manage and maintain the physical specifications for all DAS and sensors.
Data Recorders: Add, Detect, Edit, Delete, Export, Import
1. To add DAS, power up and then connect the DAS to your PC. (Windows may install a device driver to support USB communications and ask you to reinstall the hardware driver each time you connect a SLICE Stack to a different USB port.)
2. S elect “Data Recorders” from the main Home screen.
To add DAS manually, go to step 7. To detect (auto-discover) DAS, go to step 3. To edit
DAS, go to step 11. To delete DAS, go to step 12. To export DAS, go to step13. To
3. Select
“Detect” to find all connected DAS.
support.dtsweb.com
16
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
4. Discovered DAS (USB and Ethernet) will be listed. Alternately, manually
“Add” an IP address for new Ethernet DAS.
5.
Select “Save” to add found and selected DAS to database.
6. Select
“Scan all” –or– “Scan selected” to verify communications with discovered DAS or new DAS. Select
“Query selected” if you are ready to establish communications with the
DAS or new DAS. Then return to step 5 above.
–or–
7.
Select “Add” to add DAS manually.
support.dtsweb.com
17
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
8. Select DAS type from the pull-down menu. All fields in red must be completed.
9.
Select “Save” to add DAS to the database.
support.dtsweb.com
18
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
10.
Select “Done” and the table will be populated.
December 2016
11.
To edit DAS information (“Type”, “IP address”, “Serial number”, and “Firmware”), select the DAS from the
“Data Recorders” screen. Select “Edit” to change the information.
Select
“Save” to record the changes to the database.
support.dtsweb.com
19
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
12. To delete a DAS from the database, select the DAS, select
“Delete”, and then “Yes” to confirm.
13. To export DAS information to an XML file, select
“Export”. Select 1 or more DAS and browse to the desired location to save the file. Select
“Done” when finished.
support.dtsweb.com
20
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
14.
To import DAS information from an XML file, select “Import”. Browse to select the file and then select “Import”. Select “Done” when finished.
15. S elect “Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
21
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Sensor Templates: Add, Edit, Delete
December 2016
To speed up data entry and promote accuracy, create a sensor template to support the most commonly used sensors in your test environment. The template is easily applied when creating a new sensor and the sensor specifics (S/N, cal data, etc.) easily added for each unique sensor.
1.
Select “Sensor Template” from the main Home screen.
2. To add a sensor template
, select “Add”.
support.dtsweb.com
22
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
3. Only fields in red must be completed, however completing as many fields now as you can will help with setup later and avoid the need to revisit the sensor template information. It is useful to have calibration data available to complete sensor template entry.
Enter sensor type
(e.g., Endevco, DTS, etc.)
(e.g., 7264C, ARS-300, etc.)
(select 1-6)
Enter sensor’s Display information
(environmental parameter sensor measures)
( enter in sensor’s EU)
(enter in sensor’s EU)
(enter in sensor’s EU)
(enter in sensor’s EU)
(sensor’s EU)
Enter sensor’s Physical characteristics
(IEPE, 1/4 bridge, 1/2 bridge, or Full bridge)
(select one or more options)
(select “Check” for software to perform pre-test
(select Emulation or none)
Select and update Calibration functions
support.dtsweb.com
23
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
4.
Select “Save” to record sensor template to database.
December 2016
5.
To edit a sensor template, select the sensor template from the list. Select “Edit” to change
). Select “Save” (step 4) to record the changes to the database.
6. To delete a sensor template from the database, select the sensor template from the list, select “Delete”, and then “Yes” to confirm.
support.dtsweb.com
24
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
7.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
Sensor Database: Add, Import, Export, Edit, Refresh, Delete, Delete all
1. S elect “Sensor Database” from the main Home screen.
To import an existing TDAS Control or SLICEWare database, XML, TTS or SIF files, go to
step 2. To import EQX (.e2x) files, please contact DTS. To add sensors manually, go to
step 7. To edit sensors, go to step 10. To export sensors, go to step 12. To delete sensors,
2.
Select “Import” from the menu.
support.dtsweb.com
25
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
3. Select database format and browse to select the file to import. Select
“Next” to continue.
4. The Preview panel lists the sensors available for import. (Other import options such as
Models may be available to include or remove from the import.)
support.dtsweb.com
26
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
5. To import all sensors, select
“Next” –or– Import from the nav panel.
December 2016
OR
6.
Select “Done” to return to the sensor table or “Import another” to continue (back to step 3).
OR
7. Select
“Add” to add a sensor manually.
support.dtsweb.com
27
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
8. Only fields in red must be completed, however completing as many fields now as you can will help with setup later and avoid the need to revisit the sensor information. It is useful to have calibration data available to complete sensor entry.
Enter sensor type
(Analog, Digital input, Squib, or Digital output)
(template options, if available)
(e.g., Endevco, DTS, etc.)
(e.g., 7264C, ARS-300, etc.)
(select 1-6)
Enter sensor’s Display information
(e.g., H3 head accel X)
(environmental parameter sensor measures)
(enter in sensor’s EU)
(enter in sensor’s EU)
(enter in sensor’s EU)
(enter in sensor’s EU)
(sensor’s EU)
Enter sensor’s Physical characteristics
(IEPE, 1/4 bridge, 1/2 bridge, or Full bridge)
(select one or more options)
(select “Check” for software to perform pre-test
(select Emulation or none)
(add TEDS ID, if known)
Select and update Calibration functions
(you may attach calibration data here)
support.dtsweb.com
28
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
9. Select
“Save” to record sensor to database.
December 2016
10. To edit a sensor, select the sensor from the list. Edit the information on the right side of
). Select “Save” (step 9) to record the changes to the database.
“modified” = sensor has been changed but not saved
support.dtsweb.com
29
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
11. Note: If multiple users edit the same sensor simultaneously
, select “Refresh” to update the latest sensor settings to your screen.
12.
To export sensor information to an XML file, select “Export”.
13. Select export format and browse to the desired location to save the file. C heck “Export only TDC compatible sensors” if you want to export only the sensors compatible with
TDAS Control. Select sensors to include in export. Select
“Export” to save. The export file will open for review.
Select “Done” when finished.
support.dtsweb.com
30
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
14. To delete a sensor from th e database, select the sensor from the list, select “Delete”, and then “Yes” to confirm.
15. To delete all sensors from the database, select “Delete all”, and then “Yes” to confirm.
support.dtsweb.com
31
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
16.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
32
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Prepare
December 2016
Group Templates: Add, Edit, Delete
A “Group Template” is a group of associated sensors commonly used together. You can create a template for an entire dummy (e.g., H3), for unique dummy components (e.g., head or leg), pyrotechnic devices, etc.
“Group Templates” are only available in ISO mode (default). At least one “Group Template” is required prior to creating a “Group.”
1. S elect “Group Templates” from the main Home screen.
To add a group template, go to step 2. To edit a group template, go to step 5. To delete a
2.
Select “Add” to create a group template.
3. Complete the Info screen first, then add Channels. A template image is optional.
H3-50-92
Enter name of template*
Enter template description
(enables ISO channel selection by group type)
(automated; when template was last modified)
(automated; who last modified template)
* e.g., H3-50-92 = Hybrid III, 50th percentile, 92 channels
support.dtsweb.com
33
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
4. Select the channels from those available for your type of template. (You may filter and
sort to make this easier.) Go to step 7.
5. To edit a group template, double-click on the group template
–or– select the group template and select “Edit”.
support.dtsweb.com
34
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
6. Edit Info, Template Image and Channels as desired.
December 2016
7. Select
“Save” when finished.
8. To delete a group template from the database, select the group template from the list, select “Delete”, and then “Yes” to confirm.
support.dtsweb.com
35
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
9.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
Groups: Add, Edit, Delete
Creati ng a “Group” combines the test article(s), sensors and DAS into one operational test configuration.
1.
Select “Group” from the main Home screen.
To add a group, go to step 2. To edit a group, go to step 8. To delete a group, go to step 9.
2. Select
“Add” to create a group.
support.dtsweb.com
36
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
3. Starting with the Info nav step, select a group template from the drop-down list, and create a group name.
4. Add Hardware if known (optional), otherwise skip to step 6. If the DAS is in the data
recorder database, select the DAS to include in the group.
support.dtsweb.com
37
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
5. If the DAS is not in the data recorder database, select
“Discover Hardware” from the Info nav step. Discovered DAS (USB and Ethernet) will be listed. Alternately, manually
“Add” an IP address for new Ethernet DAS. Select
“Scan selected” to verify communications with discovered or new DAS. Select
“Save” to add DAS to database.
support.dtsweb.com
38
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
6. On the Sensors nav step, assign sensors and DAS hardware channels to the group.
(Sensor details can be reviewed in Sensor settings, Squibs, Digital outputs and Digital
inputs nav steps.)
7. Select
“Save” when finished.
8. To edit a group, double-click on the group
–or– select the group and select “Edit” (see
support.dtsweb.com
39
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
9.
To delete a group from the database, select the group from the list, select “Delete”, and then “Yes” to confirm.
10.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
Customer Details (ISO only): Add, Edit, Delete
Completing
“Customer Details” is optional and are included with ISO data exports. If ISO is required for your organization,
“Customer Details” are required.
1. Select
“Customer Details” from the main Home screen.
support.dtsweb.com
40
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
2. Select
“Add” to create a “Customer Details” record.
3. Complete the information. All fields in red must be completed.
December 2016
4.
Select “Save” when finished.
support.dtsweb.com
41
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
5. To edit customer details, double-click on the customer
–or– select the customer and
select “Edit” (see steps 3 and 4).
6. To delete a customer from the database, select the customer from the list, select “Delete”, and then “Yes” to confirm.
7.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
42
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Engineer Details (ISO only): Add, Edit, Delete
Completing
“Engineer Details” is optional and are included with ISO data exports. If ISO is required for your organization,
“Engineer Details” are required.
1. Select
“Engineer Details” from the main Home screen.
2. Select
“Add” to create an “Engineer Details” record.
3. Complete the information. All fields in red must be completed.
support.dtsweb.com
43
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
4.
Select “Save” when finished.
December 2016
5. To edit engineer details, double-click on the engineer
–or– select the engineer and select
6.
To delete an engineer from the database, select the engineer from the list, select “Delete”, and then “Yes” to confirm.
support.dtsweb.com
44
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
7.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
Lab Details (ISO only): Add, Edit, Delete
Completing “Lab Details” is optional and are included with ISO data exports. If ISO is required for your organization,
“Lab Details” are required.
1. Select
“Lab Details” from the main Home screen.
To add a lab, go to step 2. To edit lab details, go to step 5. To delete a lab, go to step 6.
2. Select
“Add” to create a “Lab Details” record.
support.dtsweb.com
45
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
3. Complete the information. All fields in red must be completed.
December 2016
4.
Select “Save” when finished.
support.dtsweb.com
46
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
5. To edit lab details, double-click on the lab
–or– select the lab and select “Edit” (see steps
6.
To delete a lab from the database, select the lab from the list, select “Delete”, and then
“Yes” to confirm.
7.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
47
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Test Setups: Add, Edit, Refresh, Import, Export, Delete
Test setups are created using existing
“Groups”. If you need to create a “Group”, please go
1.
Select “Test Setups” from the main Home screen.
To add a test setup, go to step 2. To edit a test setup, go to step 11. To change the
current/default test setup, go to step 10. To import a test setup, go to step Error! Reference
source not found.. To export a test setup, go to step 13. To delete a test setup, go to step
2. Select
“Add” to create a new test setup.
support.dtsweb.com
48
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
3. Select the Info nav step to define the test parameters. All fields in red must be completed.
4. Select the Groups nav step to view the groups included in the “Test Setup”. “Add” to the
“Groups in test” using the “Available groups” or delete a group using “Remove group”.
support.dtsweb.com
49
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
5. The Dynamic groups nav step allows the creation of a group specific to the selected test setup that has not yet been defined in the database.
support.dtsweb.com
50
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
6. Proceed to the nav step corresponding with the setup of your Dynamic group. This will allow you to define the “Channels”, “Hardware” and “Sensors”.
7. The Hardware nav step lists the DAS included in the test setup. New DAS can be added to the test setup by select ing “Discover hardware”.
support.dtsweb.com
51
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
8. The Channels nav step lists the sensors and channels included in test setup.
9. Select
“Save” when finished.
10. To change the current/default test setup, select the desired test setup and select
“Make current”.
support.dtsweb.com
52
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
11. To edit a test setup, double-click on the test setup
–or– select the test setup and select
12.
To import a test setup, select “Import” from the menu. Browse to select the file and then select “Import”. Select “Done” when finished.
support.dtsweb.com
53
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
13. To export a test setup, select the test setup from the list then s elect “Export” from the menu. Browse to the desired location to save the file and then select
“Export”. Select
“Done” when finished.
support.dtsweb.com
54
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
14. Note: If multiple users edit the same test setup simultaneously, select “Refresh” to update the latest test setup settings to your screen.
15. To delete a test setup from the database, select the test setup from the list, select
“Delete”, and then “Yes” to confirm.
16.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
55
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Custom Channels (ISO only): Add, Edit, Copy, Delete
December 2016
A custom channel is a user-defined ISO code that is used to supplement the MME-defined
ISO channel list.
1. Select
“Custom Channels” from the main Home screen.
To add a custom channel, go to step 2. To edit a custom channel, go to step 5. To copy a
custom channel, go to step 6. To delete a custom channel, go to step 7.
2. Select
“Add” to create a custom channel.
support.dtsweb.com
56
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
3. Complete the information below. All fields in red must be completed.
December 2016
4. Select
“Save” when finished.
support.dtsweb.com
57
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
5. To edit a custom channel, double-click on the channel
–or– select the channel and select
6. To copy a custom channel, select the custom channel from the list. S elect “Copy”, change the Description of the new custom channel, then select “Save”.
support.dtsweb.com
58
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
7. To delete a custom channel from the database, select the custom channel from the list, select “Delete”, and then “Yes” to confirm.
8.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
59
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Diagnostics
December 2016
Diagnostic features (channel, sensor, hardware and trigger checks) are typically performed
immediately prior to running a test. See step 7
of “Run Test” for a review of these functions.
Check Channels
1. Select
“Check Channels” from the main Home screen.
2. Select the Hardware nav step to perform a status check using the default test setup.
3. Select the Check sensor ID nav step to perform a sensor check.
support.dtsweb.com
60
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
4. Select the Diagnostics nav step and then select
“Run: Diagnostics” to perform a diagnostic check.
support.dtsweb.com
61
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
5. Select the Realtime nav step to view sensor data. (The channels shown are defined by the test setup.)
6. Select
“Done” to return the main Home screen. To return to the quick-start steps, go to
Check Trigger
1. Select
“Check Trigger” from the main Home screen.
support.dtsweb.com
62
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
2. Select the Hardware nav step to perform a status check using the default test setup.
3. Select the Check sensor ID nav step to perform a sensor check.
support.dtsweb.com
63
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
4. Select the Check trigger nav step, select
“Run: Check trigger”, then user generates a hardware trigger.
… User generates hardware trigger …
5. Select
“Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
64
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Record
December 2016
Run Test
While we d o strongly recommend using the “Diagnostics” functions available, you can return to the main Home screen, bypass “Diagnostics”, and “Run Test”.
1.
Select “Run Test” from the main Home screen.
Nav steps are configurable when setting up your test groups, therefore some may not be visible in your user interface.
2. The Basic info nav step displays an overview of the test setup.
3. The
“View summary” action button on the bottom of the screen will export a test summary in an Excel format.
support.dtsweb.com
65
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
4. Continue to the Hardware nav step. DataPRO will search for available hardware, displaying the DAS in your test group and a “Passed” notification after successfully connecting.
5. Proceed to the Check sensor ID nav step to confirm the sensors in your test setup are properly identified. Sensors without EID will need to be manually assigned by selecting the arrow next to their corresponding DAS channel and then selecting the sensor from the drop-down menu.
support.dtsweb.com
66
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
6. When all sensors have been assigned, the “Done. All sensors identified.” message will appear.
7. Continue to the Diagnostics nav step. Following the “Preparing Hardware” screen, a
“Waiting for user selection” message will appear. Select the now flashing
“Run: Diagnostics” button.
support.dtsweb.com
67
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
8. A pre-test diagnostics report will be generated and can be previewed in Excel by selecting the “View report” action button. Once diagnostics has passed, continue to the next nav step.
9. The Realtime nav step allows you to check sensor channels throughout the test object.
(The channels shown are defined by the test setup.)
support.dtsweb.com
68
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
10. To perform a trigger check, select the “Run: Trigger Check” button. Once the system is armed, the “Waiting for trigger” message will appear. Apply a trigger to the system; a
“Passed” message confirms the system’s ability to receive a trigger.
11. Select flashing
“Run: Trigger Check” and then apply trigger.
support.dtsweb.com
69
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
12. Continue to the Arm nav step. Select the “Run: Arm” button at the bottom of the screen.
Once armed, the “Armed” banner will appear.
13. When the test is ready to be performed, select the “Stop Monitoring” button.
14. Do not disconnect Ethernet or USB until the “Monitoring Stopped, OK to Disconnect” message appears.
support.dtsweb.com
70
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
15. When the test has completed, reconnect the system to your computer and select the
“Start Monitoring” button. The “Ready for download” message will appear.
16. Select the Download ROI
–or– Download all nav step on the left of the screen. The
“Waiting for user selection” message will appear. Select the “Run: Download ROI” –or–
“Run: Download all” button as applicable.
–or–
support.dtsweb.com
71
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
17.
Upon receipt of the “Download finished” message, data can be viewed using the View
ROI
–or– View all nav steps.
–or–
18. Action buttons and filter options are available at the bottom of the screen. (See also
“View Data” starting on page 77.)
support.dtsweb.com
72
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
19.
Channels can be navigated by using the “Prev 1 graph(s)” and “Next 1 graph(s)” buttons, or selecting the Channel drop-down menu at the far right of the screen.
20. Test data can be exported by selecting the Export ROI
–or– Export all nav steps on the
left of the screen. (See also steps 2-9 in
“Export Data”.)
–or–
21.
Select “Done” to return to the main Home screen. To return to the quick-start steps, go
support.dtsweb.com
73
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Download Data
1.
Select “Download Data” from the main Home screen.
December 2016
2. Select the Hardware nav step and select from the hardware listed in the table. Continue
the section on “Run Test.”
support.dtsweb.com
74
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Review
View Data: View, Modify
1.
Select “View Data” from the main Home screen.
December 2016
Columns within the
“View Data” table are searchable by selecting the white arrow in the right corner of the tabs. The column order can be customized by dragging and dropping in their desired order.
To view a file listed in the table, go to step 4. To view data from a test not listed in the table,
go to step 2. Data can be modified when being viewed.
2. S elect “Browse”.
support.dtsweb.com
75
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
3. Browse to the desired location (C:\DTS\DataPRO\Data is the default location) and select the desired test data. Test data is organized by timestamp within its respective test name folder.
4. Double-click on the test
–or– highlight the test and select “View”.
support.dtsweb.com
76
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Channel being viewed
DAS used for channel
December 2016
EU = graph displayed in Engineering Units assigned to that sensor
mV = graph displayed in mV
ADC = graph displayed in analog-to-digital counts
Figure 1
support.dtsweb.com
77
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Modify channel description
Modify channel filter
Flag data for the selected channel
Shift T0 for the selected DAS or the test as a whole
Apply an EU Multiplier
Apply an EU Offset
Close when done
Location of pointer
December 2016 support.dtsweb.com
78
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
5. To add a calculated channel to the test data, select
“Add Calculation”.
December 2016
6. Select the calculation type using the drop-down menu options, and assign the channel for the calculation to be applied in the “Calculation Input Channel” menu. (This will change the DTS file and add the calculated channel (binary data) to the data folder.)
7. When finished, select “Save” to view the data. Your calculated channel will be at the bottom of the channel list.
8. When finished, selec t “Done” to return to the main Home screen. To return to the quick-
support.dtsweb.com
79
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Export Data
1.
Select “Export Data” from the main Home Screen.
December 2016
To export a file listed in the table, go to step 4. To export a file not listed in the table, go to
2.
Select “Browse”.
support.dtsweb.com
80
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
3. Browse to the desired location (C:\DTS\DataPRO\Data is the default location) and select the desired test data. Test data is organized by timestamp within its respective test name folder.
4. Double-click on the test
–or– highlight the test and select “Export”.
support.dtsweb.com
81
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
5. Select the data export format(s) (DIAdem, CSV, ISO, TTS, RDF, TDAS, TDMS) and modify fields as needed. All fields in red must be completed. (Note: DIAdem, RDF,
TDAS and TDMS formats do not have options.)
ISO Export Options
support.dtsweb.com
CSV Export Options TTS Export Options
82
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
6.
Select “Run: Export ROI”.
December 2016
7. The export file is saved in the same test folder as the original data inside a subfolder called Exports. (C:\DTS\DataPRO\Data is the default location. Test data is organized by timestamp within its respective test name folder.) RDF files are saved in the main data folder.
support.dtsweb.com
83
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
8. Select
“Upload data” –or– “Run: Upload data” to continue. Data will be saved to location
OR
9.
When finished, select “Done” to return to the main Home screen. To return to the quick-
support.dtsweb.com
84
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Administrative
December 2016
Manage Users
This tile allows the Administrator to add, edit and delete users and user settings. Features and functions available to all other users are controlled by the DataPRO Administrator.
Contact your Administrator if you need features or functions you do not currently have.
REMEMBER:
After initial installation, the Administrator (Admin password =
DTSAdmin) should change the password as soon as possible.
Four user templates are included and available to use as a baseline to create your own users.
You can use the templates as-is or modify them before creating users. (Editing the templates before adding new users is recommended to avoid duplication of effort later.)
1. To add or edit users, s elect “Manage Users” from the main Home screen.
To add a user using existing user templates, go to step 5. To modify an existing user or edit
user templates (Admin, PowerUser, User and Guest), go to step 2.
support.dtsweb.com
85
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
2. To modify a user, highlight the desired user and then select
“Edit”. (You may filter and sort to make this easier.)
3.
Use the nav steps to edit the user “Info”, “Permissions” and “Visibility”.
Change the user
’s display name.
Add Tags to the user.
Change the user’s password.
Confirm the user’s password.
support.dtsweb.com
86
Expand the menus as necessary and select:
- Deny (no privileges)
- Read (read-only access)
- Read and execute (read-only and
execute operation)
- Edit (read, execute and edit privileges)
- Admin (full access including changing
user privileges)
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
- Expand the menus as necessary.
- Check so the user will see a function.
- Uncheck so the user will not see a function.
4. Select
“Save” or “Save and add another user” to continue. When finished, return to the main Home screen.
5.
To create a new user, select “Add”.
support.dtsweb.com
87
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
6. Complete the information and select the user template you wish to assign the user.
7.
Make any changes to “Permissions” or “Visibility” unique to this user (see step 3) and
select
“Save” or “Save and add another user” to continue.
8. When finished, return to the main Home screen.
System Settings
Use “System Settings” to edit any of the following system parameters.
support.dtsweb.com
88
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Tables
Check to include or uncheck to remove table fields from being “Visible” on-screen.
Check box to make visible
Expand/minimize tables as needed
Realtime
These settings affect realtime data view(s). Please read the on-screen information carefully before adjusting these settings.
ISO Settings
DataPRO installs with “ISO 13499” as the default. Other options are available, including “No
ISO”. If “ISO 13499” is selected, additional features and tiles for “Group Templates”,
“Customer Details”, “Lab Details” and “Custom channels” are visible/active as required by
ISO standards.
support.dtsweb.com
89
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
ISO only Select ISO or No ISO Select ISO, No ISO or User specified channel codes
UI (User Interface)
These settings affect the display format and use standard numeric format strings.
Description
Format
and
Precision Specifier
Example
Number: Integers and decimals, group and decimal separators, with optional negative sign
Decimal: Integers with optional negative sign
Exponential (scientific): Exponential notation
N or n
Number of decimal places
D or d
Minimum number of digits
E or e
Number of decimal digits
N where 1234.567 = 1,234.57
N 1 where 1234 = 1,234.0
N 3 where -1234.56 = -1,234.560
D where 1234 = 1234
D 6 where -1234 = -001234
E where 1052.0329112756 =
1.052033E+003
E 2 where -1052.0329112756
=
-1.05e+003
Fixed-point: Integers and decimals with optional negative sign
F or f
Number of decimal digits
F where 1234.567 = 1234.57
F 4 where -1234.56 = -1234.5600
For more information, see https://msdn.microsoft.com/en-us/library/dwhawy9k%28v=vs.110%29.aspx
.
support.dtsweb.com
90
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Test Options
Generally, these settings affect communications between PC and DAS along with other testing parameters. Please adjust these settings carefully.
support.dtsweb.com
91
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Restore Settings
Use “Restore settings” at any time to return to default values for that nav step.
support.dtsweb.com
92
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Appendix A: DataPRO File Structure
December 2016
C:\DTS\DataPRO
Contains DataPRO software organized in folders by version number. (This is the default installation location.)
C:\DTS\DataPRO\Data
Contains data files organized in folders by test name. This file location is used for all versions of DataPRO.
C:\DTS\DataPRO\Data\<test setup name>
Contains test data organized by timestamp for a given test.
C:\DTS\DataPRO\Data\<test setup name>\<test ID>\Binary
Contains channel data files (.CHN) from a given test. Whether this file contains all test data or a region of interest (ROI) depends on the user
’s selection in the test setup.
support.dtsweb.com
93
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
C:\DTS\DataPRO\Data\<test setup name>\<test ID>\Exports
Contains test data in the user-selected export format(s) (DIAdem, CSV, ISO TTS, RDF,
TDAS, TDMS) after test completion.
C:\DTS\DataPRO\Data\<test setup name>\<test ID>\Reports
Contains test reports and summaries for the hardware channels included in the test.
C:\DTS\DataPRO\<version number>\db
Contains entire DataPRO database (sensors, DAS, group templates, groups, test setups, etc.).
C:\DTS\DataPRO\<version number>\Logs
Contains log file(s). To assist troubleshooting, DTS Support may ask you to send these files.
C:\DTS\DataPRO\<version number>\ZonePictures
Contains default and user-added photos.
support.dtsweb.com
94
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Installing a New Version
December 2016
After installing a new version of software (steps 1-3 on page 5), any user-modified files and
settings in the previous version need to be manually updated or copied to their new location.
(Note: If you changed the location of the install directory, browse to that location.)
C:\DTS\DataPRO\<version number>\db
Copy this folder from the old directory to the new directory. (If using a networked database, this is not required.)
C:\DTS\DataPRO\<version number>\ReportTemplates
This location contains default and user-defined report templates. If there are any user changes to reports, copy the files in this folder from the old directory to the new directory.
C:\DTS\DataPRO\<version number>\ZonePictures
If there are any user additions, copy those files from the old directory to the new directory.
C:\DTS\DataPRO\<version number>\MeasurementUnits.xml
This file contains user settings. Copy this file from the old directory to the new directory.
C:\DTS\DataPRO\<version number>\DataPRO.exe.config
If DTS Support has had you modify this file, you will also need to modify the file in the new location. Right-click to edit manually
—do not copy the old file.
support.dtsweb.com
95
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Appendix B: DataPRO .dts File Format
December 2016
Overview
The .dts file is an XML-based file that contains information about the overall test and the individual channels. Some of the information may be redundant with information stored in the binary channel header.
The attributes and relationships of each XML node are described below.
XML Structure
<Test>
The Test tag is the outer most tag. It contains the following attributes and describes details common to the entire test.
Id
Guid
Name
Description
FaultFlags
Data Type
String
String
Windows UUID string
Integer (UInt16)
Description
The name of the Test Setup, as well as the name of the subfolder in the "Data" folder which contains the data, reports, and exports for all occurrences of runs of this Test Setup (further organized by the "Test Id" which may be modified by the user in the "Basic info" step of the "Run Test" tile). The "Test Id" is typically the same as the .dts file name.
The text optionally modified by the user in the "Description" field of the "Basic info" step of the "Run Test" tile
A unique identifier assigned to each event
16-bit bit array
Bit 0: Incoming status line dropped
Bit 1: ADC Buffer Overrun
Bit 2: Flash CRC Error
Bit 3: Trigger before start
Bit 4: Input voltage low
Bit 5: Input voltage high
Bit 6: Back-up voltage low
Bit 7: Back-up voltage high
Bit 8-15: Unused
InlineSerializedData Boolean
<Modules>
Within the Test node is a list of modules contained within a <Modules></Modules> tag.
Module definitions depend on the DAS type. A <module> corresponds to a SLICE MICRO or NANO Base; a SIM, TOM or DIM in a TDAS PRO Rack; 1 of 4 internal, 8-channel modules
support.dtsweb.com
96
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
in a TDAS G5 DAS; 1 of 6 [or 1 of 3] internal, 3-channel modules in an 18-channel [or 9channel] SLICE PRO SIM or DIM; or an entire SLICE PRO TOM.
Number
SerialNumber
Name
AaFilterRateHz
BaseSerialNumber
NumberOfSamples
Data Type
Integer
Integer
String
String
Integer
UnsubsampledNumberOfSamples Integer
RequestedPostTriggerSeconds
RequestedPreTriggerSeconds
PostTriggerSeconds
PreTriggerSeconds
RecordingMode
SampleRateHz
StartRecordSampleNumber
NumberOfChannels
InlineSerializedData
Double
Double
Double
Double
String
Integer
Integer
Integer
Boolean
Description
The name cut off frequency of the hardware anti-alias filter used during the test
A sequential number assigned to each module within the test
The factory assigned serial number of the SLICE Base
For TDAS modules installed in a rack, this is the rack's serial number. All other DAS use the unit's serial number.
The number of samples stored in each channel file. This will be fewer than the number of samples originally requested by the user if the data has been subsampled or if only a portion of the data was downloaded.
The total number of samples collected during data acquisition
The exact number of seconds specified in the "Default posttrigger second(s)" field of a Test Setup. This may differ slightly from PostTriggerSeconds which reflects the amount of actual data recorded.
The exact number of seconds specified in the "Default pretrigger second(s)" field of a Test Setup. This may differ slightly from PreTriggerSeconds which reflects the amount of actual data recorded.
The number of seconds of recorded data that the user requested after T=0
The number of seconds of recorded data that the user requested before T=0
Options are RecorderMode, CircularBuffer,
AutoRecorderMode, AutoCircularBufferMode,
ContinuousRecorderMode, HybridRecorderMode and
MultiHybridRecorderMode.
The rate at which sampling occurred during data collection
The sample number at which the start signal was first detected. The value will always be 0 when RecordingMode
= CircularBuffer.
The number of user configured channels within the module
<TriggerSampleNumbers>
This is a list (possibly 0 length) of trigger sample numbers. In the Circular Buffer case, there will be one trigger sample number. In Recorder mode, the trigger is optional. In the case of multiple event mode, there may be more than one trigger sample number.
support.dtsweb.com
97
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
<Channels>
December 2016
The Channels tag contains a list of channel elements. It should have the same number of entries as NumberOfChannels in the Module tag. The type of the child elements will depend on the type of channel.
<AnalogInputChanel>
The AnalogInputChanel tag is used for any DAS input channel (analog or digital). (Note:
There is a typo in the tag name and “Chanel” is misspelled. It has been retained for backward compatibility.) Many of the attributes indicate how the channel was configured during the test. The AnalogInputChanel element has the following properties:
Number
DigitalMode
Name
ChannelType
DigitalMultiplier
Start
Bridge
BridgeResistanceOhms
ChannelDescriptionString
ChannelName2
Data Type
String
Integer
String
String
Date
String
Integer
String
String
Description
This identifies the representation of the data contained in the
.BIN file. Currently this value is always expected to be
DTS.Serialization.Test+Module+AnalogInputChannel.
The channel number within the DAS <module>.
For SLICE Bridge, channels are numbered 0
–2.
For TDAS PRO SIM, channels are numbered 0-7.
For TDAS PRO TOM, channels are numbered 0-7 where channel 0 is the voltage measurement for TOM external channel 1 and channel 1 is the current measurement for TOM external channel 1; channel 2 is the voltage measurement for
TOM external channel 2 and channel 3 is the current measurement for TOM external channel 2, etc.
For SLICE PRO SIM, channels are numbered 0-2 for each module.
For TDAS G5 DAS, channels are numbered 0-7 for each module.
Used for digital input channels only. The channel's form of multiplier (currently only ArbitraryLowAndHigh), the low value
(typically 0), and the high value (typically 1).
Used for digital input channels only.
CCNO = Contact Closure Normally Open (the default for digital inputs and the only mode that TDAS G5 DAS support)
CCNC = Contact Closure Normally Closed
TLH = Transition Low to High
THL = Transition High to Low
Currently unused
Either FullBridge or HalfBridge
The specified bridge resistance used during the shunt check
The user-provided description for the channel
For channels created in ISO mode, the name of the channel from the Group Template.
For channels created in non-ISO mode, the name of the sensor used to create the channel.
support.dtsweb.com
98
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Name Data Type
ChannelId
HardwareChannelName
Description
DesiredRange
Sensitivity
SoftwareFilter
ProportionalToExcitation
IsInverted
LinearizationFormula
IsSubsampled
AbsoluteDisplayOrder
LastCalibrationDate
SensorID
OffsetToleranceLowMv
OffsetToleranceHighMv
DataFlag
ExcitationVoltage
String
String
String
Integer
Double
String
Boolean
Boolean
String
Boolean
Integer
Date
String
Double
Double
Boolean
String
December 2016
Description
An internal representation of the channel based on its Group name and position in the hardware
For SLICE Bridge = [<BR sn>] CH-01 through 03
For TDAS PRO SIM = [<SIM sn>] CH-01 through 08
For TDAS PRO TOM = [<TOM sn>] SQ-01 through 04
TOM digital outputs = [<TOM sn>] DO-01 through 08
For TDAS PRO DIM = [<DIM sn>] DI-01 through 16
For TDAS G5 DAS = [<G5 sn>] CH-01 through 32
G5 DAS digital inputs = [<G5 sn>] DI-01 through 16
For SLICE PRO SIMs = [<SPS sn>] CH-01 through 18]
For SLICE PRO TOM = [<SPT sn>] SQ-01 through 04
TOM digital outputs = [<SPT sn>] DO-01 through 08
For SLICE PRO DIM = [<SPD sn>] DI-01 through 18
The user-provided description for the sensor; currently the same as ChannelDescriptionString
The user-requested full scale
The sensitivity of the sensor in either mv/V/EU or mv/EU depending on ProportionalToExcitation
The requested filtering to apply to this channel. Stored data is unfiltered, and this value must be used to apply proper filtering.
Typical values are "1650hz" for CFC1000.
Indicates if the output of this sensor is proportional to excitation. Used in conjunction with Sensitivity.
(Optional) Indicates if the data should be inverted before presenting to the user. If missing, this attribute is considered
'false'.
The formula used to generate a graph of data collected using a non-linear sensor
(Optional) Indicates if the data stored on disk is at a lower sample rate than the original data collection. If missing, this attribute is considered 'false'.
The nominal ordering of channels in reports, graphs, and exports
The most recent date that a sensor was calibrated
A sensor's electronic ID
The most that a sensor's offset is allowed to vary below 0 mV and still pass a diagnostic offset check
The most that a sensor's offset is allowed to vary above 0 mV and still pass a diagnostic offset check
A value that can be assigned to a channel when viewing data.
Possible values are
“0” (None), “1” (Normal), “2” (Saturated),
“3” (ZeroCrossing), “4” (BrokenWire), and “5” (Other).
The voltage specified in a sensor's definition
support.dtsweb.com
99
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Name Data Type Description
December 2016
Eu
SerialNumber
CalSignalEnabled
ShuntEnabled
String
Boolean
The user provided Engineering Units (EU) (e.g., mm, g, or msec2)
String The serial number of the sensor used with this channel
Boolean Applies to SLICE IEPE only
For SLICE Bridge only. Indicates if the user requested the channel be shunted during diagnostics.
VoltageInsertionCheckEnabled Boolean True = check enabled or False = no check performed
RemoveOffset Boolean
Indicates if the user requested hardware offset compensation be used during diagnostics
ZeroMethod String
Identifies the type of software offset compensation that should be used. If the value is "UsePreCalZero," then the Pre-
Calibration zero value stored in the channel file should be used. If the value is "AverageOverTime," then an average value computed from the channel data should be used.
ZeroAverageWindowBegin
ZeroAverageWindowEnd
Double
Double
If ZeroMethod = AverageOverTime, this is the beginning of the window to be used for computing the average
If ZeroMethod = AverageOverTime, this is the end of the window to be used for computing the average
InitialEu
InitialOffset
UnsubsampledSampleRateHz Integer
MeasuredShuntDeflectionMv
TargetShuntDeflectionMv
MeasuredCalSignalMv
TargetCalSignalMv
MeasuredExcitationVoltage
FactoryExcitationVoltage
TimeOfFirstSample
UnitConversion
AtCapacity
Double
Double
Double
Double
Double
Double
Double
Double
Double
Double
Boolean
A value provided by the user that should be subtracted from all scaled data in addition to the selected ZeroMethod
A sensor's offset when last calibrated
The sampling rate used during data collection. Valid only if
IsSubsampled = True.
(Optional) If a shunt test was performed, the actual deflection of the shunt
(Optional) If a shunt test was performed, the expected shunt deflection
Diagnostic results from calibration signal used to determine gain (IEPE 1.0 only)
Diagnostic results from calibration signal used to determine gain (IEPE 1.0 only)
(Optional) The measured excitation voltage, if available. Used by DataPRO for scaling proportional-to-excitation sensor data if
"factory" excitation voltage is not available.
(Optional) The factory excitation voltage, if available. Used by
DataPRO for scaling proportional-to-excitation sensor data.
The time relative to T=0 of the first sample
The factor used to calculate displayed EU given a sensor's sensitivity and desired range
Whether or not a sensor was calibrated based on its maximum output
support.dtsweb.com
100
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Name Data Type
CapacityOutputIsBasedOn
SensitivityUnits
Double
String
December 2016
Description
If AtCapacity = True, the sensor's output that calibration was based on
The units that a sensor's sensitivity is based on; either "NONE",
"mV", "mvPerV” (mv/V), "mvPerVperEU" (mV/V/EU), or
"mvPerEU" (mV/EU).
support.dtsweb.com
101
10920-04010-MAN (Rev. 2)
42
N + 42
N + 46
N + 50
N + 54
N + 62
N + 66
N + 70
N + 74
N + 82
N + 90
DataPRO 1.3
User’s Manual
Appendix C: DataPRO Binary File Format
Bin File Header Version 4*
Offset # of bytes
0
4
4
4
Data Type
UInt32
UInt32
8
16
24
28
32
40
8
8
4
4
UInt64
UInt64
UInt32
UInt32
December 2016
Description
Magic key to identify file: 0x2C36351F
Version number of this file header*
Offset (in bytes) from start of file to where data samples start
Number of samples in this file
Number of bits per sample
0 = unsigned samples; 1 = signed samples
Sample rate
Number of triggers. May be 0.
N + 92
N + 92 + X
N + 100 + X
N + 104 + X
N + 108 + X
N + 112 + X
N + 116 + X
N + 132 + X
4
4
4
16
4
4
4
8
8
2
Double
UInt16
N = number of triggers * 8
UInt64
4
4
Int32
Int32
Int32
Double
Int32
Int32
4
8
8
2
X = length of
EU field
8
4
Int32
Double
Double
Int16
Char
Double
Int32
Int32
Int32
Int32
Char []
4 Int32
Trigger sample number
Pre-test zero level (in counts)
Removed ADC (in counts)
Pre-test diagnostics level (in counts)
Pre-test noise (percentage of full scale)
Post-test zero level (in counts)
Post-test diagnostics Level (in counts)
Data zero level (in counts)
Scale factor mV (mV/Count)
Scale factor EU (mV/EU or mV/V/EU)
EU field length (with terminator)
Engineering units (without NULL termination)
Excitation
Trigger adjustment samples (reserved)
Zero mV (in counts)
Window average (in counts)
Original offset (in counts)
ISO code
CRC16 for binary header information from byte 0 to (N + 132 + X - 1)
N + X + 136 64bit
(ulong) offset found in
3rd file field
Size of sample data
16-, 24-, or 32-bit depending on "Number of bits per sample"
DATA SAMPLES START HERE
support.dtsweb.com
102
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Appendix D: SQL Server Set-up (Windows 7)
1. In Windows 7 OS, run SQLEXPR_x64_ENU.exe.
Select “Run”.
December 2016
2.
Wait…
support.dtsweb.com
103
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
3. Select
“Yes”.
December 2016
4.
When you get the following, select “New SQL Server stand-alone installation or add features to an existing installation”.
support.dtsweb.com
104
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
5.
Check the “I accept the license terms” box, then select “Next”.
December 2016
6.
Select “Next”.
support.dtsweb.com
105
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
7.
Wait…
December 2016
8.
Select “Next”.
support.dtsweb.com
106
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
9.
Select “Next”.
December 2016
10.
Select “Next”.
support.dtsweb.com
107
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
11.
Select “Next”.
December 2016
12.
Select “Next”.
support.dtsweb.com
108
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
13. Select
“Close” to close the SQL Server Installation Center.
December 2016
14. Run SQLManagementStudio_x64_ENU.exe. After a long wait, select “Run”.
support.dtsweb.com
109
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
15.
Wait…
December 2016
16.
Select “Yes”.
support.dtsweb.com
110
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
17.
Select “New SQL Server stand-alone installation or add features to an existing installation”.
18.
Select “Next”.
support.dtsweb.com
111
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
19.
Click the “Add features to an existing instance of SQL Server 2012” button. Select “Next”.
20. Check the “Management Tools – Basic” box. Select “Next”.
support.dtsweb.com
112
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
21.
Select “Next”.
December 2016
22.
Wait…
support.dtsweb.com
113
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
23.
Select “Close” to close the SQL Server Installation Center.
December 2016
24.
Go to Control Panel | System and Security. Select “Allow an app or feature through
Windows Firewall” in the “Windows Firewall” section.
support.dtsweb.com
114
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
25.
Select “Change Settings”. Select “Allow another program…”.
December 2016
26.
Select “Browse”.
support.dtsweb.com
115
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
27. Browse to
C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\sqlservr
.
Select “Open”. Select “Add”. Select “OK”. Close System and Security window.
28. Run Sql Server Configuration Manager
support.dtsweb.com
116
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
29.
Select “Yes”.
December 2016
30. Expand SQL Server Network Configuration. Select Protocols for SQLEXPRESS.
Enable TCP/IP by right-clicking on Disabled and selecting Enable.
support.dtsweb.com
117
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
31.
Select “OK”.
December 2016
32. Open the TCP/IP Properties by double-clicking on the TCP/IP Protocol Name.
33. Select the IP a ddresses tab, scroll down to the bottom, blank out the “TCP Dynamic
Ports” value, and add “1433” as the “TCP Port” value under “IPAll”.
support.dtsweb.com
118
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
34.
Select “OK”.
December 2016
35.
Select “OK”.
support.dtsweb.com
119
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
36. Run SQL Server Management Studio.
December 2016
37.
Click “Connect”.
support.dtsweb.com
120
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
38. Right-click on the top-most level of the tree and select
“Properties”. On the Security page, select “SQL Server and Windows Authentication mode”. Select “OK”.
39.
Select “OK”.
support.dtsweb.com
121
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
40. Go back to Sql Server Configuration Manager and select
“SQL Server Services”. Restart
SQL Server (SQLEXPRESS) by right-clicking and selecting Restart.
41. Go back to SQL Server Management Studio
. Select “File | Open | File…” and run script:
“DataPROCreationScript.sql”.
support.dtsweb.com
122
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
42. In Security\Logins, open the
“DataPROUser Properties”. On the General page, change the Password to “DTSSealBeach” (arbitrary, can be changed). Select “OK”.
43. If DataPRO has db connection problems after a Restore; for example, in SQL Server
Management Studio:
support.dtsweb.com
123
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
44. Right-click on DataPRO | Security | Users | DataPROUser and select Delete. Select
“OK”.
45.
If you get the following, select “OK”, then “Cancel”.
support.dtsweb.com
124
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
46. Right-click on DataPRO | Security | Users | dbo and select
“Properties”.
December 2016
47. On the Owned Schemas page, select db_owner and then select
“OK”.
support.dtsweb.com
125
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
48. Now re-attempt to delete DataPROUser.
December 2016
49. Right-click on
“Security | Logins | DataPROUser” and select “Properties”.
50. On the General page, change the Password to the local password
(DTSSealBeachHQ) and set the Default database to DataPRO.
51. On the
Server Roles page, check the “sysadmin” box.
support.dtsweb.com
126
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
52. On the User Mapping page, check the DataPRO box, then select the ellipsis in the
Default Schema field, enter “dbo” in the box and select “Check Names”.
53.
The name will be changed to “[dbo]”. Select “OK”.
support.dtsweb.com
127
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
54.
Select “OK”.
December 2016
55.
If you get the following, select “OK”, then “Cancel”.
support.dtsweb.com
128
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
56. Delete Databases | DataPRO | Security | DataPROUser.
December 2016
57. Delete Security | Logins | DataPROUser.
58. Re-add the Login by rightclicking on Security | Logins | New Login…
59. On the
General page, enter “DataPROUser” as the Login name, choose SQL Server authentication, then enter the password (twice), and choose DataPRO as the Default database.
60.
On the Server Roles page, check the “sysadmin” box.
61. On the User Mapping page, select DataPRO and dbo as above.
support.dtsweb.com
129
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
How to Back-up the Centralized (SQL Server) DataPRO Database
1. In SQL Server Management Studio, rightclick on “DataPRO”.
2. Select
“Tasks”, “Backup…”.
support.dtsweb.com
130
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
3. Select
“Remove” to delete the file name in the “Destination” box.
December 2016
4. Select
“Add…”, then browse to your desired location.
support.dtsweb.com
131
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
5. Enter your file name and select
“OK”.
December 2016
6. Select
“OK” again.
support.dtsweb.com
132
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
7.
In the “Select a page” pane, select “Options”.
December 2016
8.
Check the “Verify backup when finished” box and select “OK”.
support.dtsweb.com
133
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
9.
Select “OK”.
December 2016 support.dtsweb.com
134
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
How to Restore the Centralized (SQL Server) DataPRO Database
1. In SQL Server Management Studio, right-click
“DataPRO”.
2. Select
“Tasks”, “Restore”, “Database…”.
support.dtsweb.com
135
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
3.
In the “Source” box, select “Device” and then the Browse ellipsis.
December 2016
4. Select
“Add” and browse to the back-up file that you want to be used for the Restore.
support.dtsweb.com
136
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
5. Select
“OK”.
December 2016
6. Select
“OK”.
support.dtsweb.com
137
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
7.
In the “Select a page” pane, select “Options” and then in the “Restore options” box, select
“Overwrite the existing database (WITH REPLACE)” box. Select “OK”.
support.dtsweb.com
138
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Instructions for Using SQL Server for the DataPRO Database
December 2016
After installing DataPRO, modify the following options in the DataPRO.exe.config file found in the C:\DTS\DataPRO\<version> folder:
1. Set DBType to 0 (the default when installed is 1 which causes DataPRO to use a local
SQLite database).
2. Set LocalDbHost to the address where SQL Server is installed (either an IP address or a hostname that resolved to that IP a ddress). The config file initially contains “your db host here” for this option.
3. If you want to use Windows authentication when accessing the SQL Server database and avoid the need to use a clear-text password (LocalDBPassword in the
DataPRO.exe.config file), set UseNTLMAuthentication to True (the default is False) and
add the Windows user(s) as SQL Server Login(s) (see Instructions for Adding a Windows
User as a SQL Server Login below).
Then, to create the initial, blank DataPRO database, run DataPROCreationScript_3.0.sql in
SQL Server Management Studio. This script can be found in your
C:\DTS\DataPRO\<version>\SQL Server Scripts folder.
If connectivity fails when you run DataPRO, ensure that the LocalDBPassword option in the
DataPRO.exe.config file matches the password that was used when setting up
DataPROUser in SQL Server (or, if UseNTLMAuthentication is True, that SQL Server allows the user
’s login), and that the server’s firewall allows access to SQL Server.
support.dtsweb.com
139
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
December 2016
Instructions for Adding a Windows User as a SQL Server Login
1. In SQL Server Management Studio, add Windows user as a login by right-clicking on
“Security | Logins | New Login…”.
2.
Enter user’s Windows login (including domain name, if needed) in the “Login name” field.
support.dtsweb.com
140
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
3. On the
“Server Roles” screen, check the “sysadmin” box.
December 2016
4. Select
“OK”.
support.dtsweb.com
141
10920-04010-MAN (Rev. 2)
DataPRO 1.3
User’s Manual
Revision History
December 2016
Rev
2
Date
15 Dec 2016
1
0
6 Sept 2016
10 Dec 2015
By Description
JL/EK Updated
“Instructions for Using SQL Server for the DataPRO Database” and added
“Instructions for Adding a Windows User as a SQL Server Login.”
DQ/EK Updated the Binary File (Appendix C) description for CRC32. Completed missing sections and updated entire document for v1.1.
EK/TR Initial release.
support.dtsweb.com
142
10920-04010-MAN (Rev. 2)
다운로드
공개 링크 업데이트됨
문서 공개 링크
광고
