Review. DTS DataPRO 1.3

DataPRO 1.3 is a comprehensive software application that supports SLICE PRO, SLICE MICRO/NANO, and legacy TDAS PRO and TDAS G5 hardware. DataPRO allows seamless integration of SLICE and TDAS systems in a single test setup. Suitable for both small facility and multi-user lab settings, DataPRO includes extensive diagnostics and hardware checks, customizable user interface with access control, support for sensor templates and group templates, and off-line test builder and multiple data export formats.

PDF

Document

DataPRO 1.3

User’s Manual

Review

View Data: View, Modify

Select “View Data” from the main Home screen.

December 2016

Columns within the

“View Data” table are searchable by selecting the white arrow in the right corner of the tabs. The column order can be customized by dragging and dropping in their desired order.

To view a file listed in the table, go to step 4. To view data from a test not listed in the table,

go to step 2. Data can be modified when being viewed.

2. S elect “Browse”.

support.dtsweb.com

10920-04010-MAN (Rev. 2)

DataPRO 1.3

User’s Manual

December 2016

3. Browse to the desired location (C:\DTS\DataPRO\Data is the default location) and select the desired test data. Test data is organized by timestamp within its respective test name folder.

4. Double-click on the test

–or– highlight the test and select “View”.

support.dtsweb.com

10920-04010-MAN (Rev. 2)

DataPRO 1.3

User’s Manual

Channel being viewed

DAS used for channel

December 2016

EU = graph displayed in Engineering Units assigned to that sensor

mV = graph displayed in mV

ADC = graph displayed in analog-to-digital counts

Figure 1

support.dtsweb.com

10920-04010-MAN (Rev. 2)

DataPRO 1.3

User’s Manual

Modify channel description

Modify channel filter

Flag data for the selected channel

Shift T0 for the selected DAS or the test as a whole

Apply an EU Multiplier

Apply an EU Offset

Close when done

Location of pointer

December 2016 support.dtsweb.com

10920-04010-MAN (Rev. 2)

DataPRO 1.3

User’s Manual

5. To add a calculated channel to the test data, select

“Add Calculation”.

December 2016

6. Select the calculation type using the drop-down menu options, and assign the channel for the calculation to be applied in the “Calculation Input Channel” menu. (This will change the DTS file and add the calculated channel (binary data) to the data folder.)

7. When finished, select “Save” to view the data. Your calculated channel will be at the bottom of the channel list.

8. When finished, selec t “Done” to return to the main Home screen. To return to the quick-

start steps, go to page 15.

support.dtsweb.com

10920-04010-MAN (Rev. 2)

Key features

Supports SLICE PRO, SLICE MICRO/NANO, and legacy TDAS PRO and TDAS G5 hardware
Seamless integration of SLICE and TDAS systems
Extensive diagnostics and hardware checks
Customizable user interface with access control
Support for sensor templates and group templates
Off-line test builder and multiple data export formats

Frequently asked questions

DataPRO 1.3 supports SLICE PRO, SLICE MICRO/NANO, and legacy TDAS PRO and TDAS G5 hardware.

Key features include extensive diagnostics and hardware checks, customizable user interface with access control, support for sensor templates and group templates, and off-line test builder and multiple data export formats.

DataPRO 1.3 is a comprehensive software application that allows seamless integration of SLICE and TDAS systems in a single test setup. It is suitable for both small facility and multi-user lab settings.

Yes, DataPRO 1.3 supports multi-user lab settings.

DataPRO 1.3 requires Windows Vista, 7, 8 or 10, Microsoft .NET 4.5, a multicore processor, 4 GB RAM minimum, 250 MB disk space for the software plus additional storage for test data, and a minimum screen resolution of 1024 x 768.

User questions

Robert Q.

How does DataPRO manage user access control and sensitive data?

DataPRO handles access to features and functions through a customizable user interface that includes access control, managed primarily by the DataPRO Administrator. Permissions include Deny, Read, Read and execute, Edit, and Admin (full access).

John T.

What are the configuration requirements for the shunt function in DataPRO?

The shunt function applies to SLICE Bridge sensor types. To use it, enable 'Check' in the sensor configuration, specify the 'BridgeResistanceOhms', and set the 'ShuntEnabled' boolean attribute. The software can then record the target and measured shunt deflection for diagnostic review.

James S.

How to configure a sensor as a squib?

In the 'Sensor Database' section, select 'Add', then choose 'Squib' from the 'Enter sensor type' pull-down menu. Complete the required red fields and save the sensor to the database.