SAFETY AND OPERATING MANUAL

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

2

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) WoRk AReA SAfety a) keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c) keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) electRIcAl SAfety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RcD) protected supply. Use of an RCD reduces the risk of electric shock.

3) PeRSoNAl SAfety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment.

Always wear eye protection. Protective equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

3

2

4) PoWeR tool USe AND cARe a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5) BAtteRy tool USe AND cARe a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6) SeRvIce a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

ADDITIONAL SAFETY

POINTS FOR YOUR HEDGE

TRIMMER

1. keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving.

Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury.

2. carry the hedge trimmer by the handle with the cutter blade stopped.

When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.

3. Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden

3

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

4 wiring. Cutter blades contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

4. check the hedge for foreign objects, e.g. wire fences

5. Hold the hedge trimmer properly, e.g. with both hands if two handles are provided

SAFETY WARNINGS FOR bATTERY PACk

a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be shortcircuited by conductive materials.

c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.

d) Do not subject battery pack to mechanical shock.

e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.

f) Seek medical advice immediately if a cell or battery pack has been swallowed.

g) keep battery pack clean and dry.

h) Wipe the battery pack terminals with a clean dry cloth if they become dirty.

i) Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.

j) Do not maintain battery pack on charge when not in use.

k) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.

l) Battery pack gives its best performance when it is operated at normal room temperature (20°c±5°c).

m) When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other.

n) Recharge only with the charger specified by PoSItec. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

o) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

p) Under abusive conditions, liquid may be ejected from the battery pack; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

q) Clean the battery pack contacts and also those of the equipment prior to battery installation.

r) Remove exhausted battery pack promptly.

s) Do not use any charger other than that specifically provided for use with the equipment.

t) Do not use any battery pack which is not designed for use with the equipment.

u) Keep battery pack out of the reach of children.

v) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.

w) Retain the original product literature for future reference.

x) Remove the battery from the equipment when not in use.

y) Dispose of properly.

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

5

4

SYMbOLS

Warning

To reduce the risk of injury, user must read instruction manual

Wear ear protection

Wear eye protection

Wear dust mask

Do not dispose of batteries. Return exhausted batteries to your local collection or recycling point.

Do not expose to moisture

Do not burn

Do not expose to rain or water

Always charge the battery pack between temperatures 40°F

(4.5°C)-105°F (40.5°C).

C-tick marking

5

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

2

5

6

7

8

4

3

6

1. BAtteRy PAck

2. ReAR HANDle

3. fRoNt HANDle

4. SAfety GUARD

5. fRoNt SWItcH leveR (All ARoUND SWItcH fUNctIoN)

6. ReAR SWItcH leveR

7. BAtteRy PAck ReleASe lAtcH

8. BlADe

9. BlADe SHeAtH

Not all the accessories illustrated or described are included in standard delivery.

1

9

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

7

6

TECHNICAL DATA

Voltage

No load speed

Blade length

Max.cutting diameter

Charging time

Machine weight

WG255E WG255E.5

20V Max* Lithium Ion

3hr approx.

2200/min

52cm

14mm

2.3kg

1hr approx.

*Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.

Nominal voltage is 18 volts.

ACCESSORIES

Blade sheath

Safety guard

Charger

Battery pack

WG255E

1

1

1 (WA3739)

1 (WA3520)

WG255E.5

1

1

1 (WA3843)

1 (WA3525)

We recommend that you purchase your accessories from the same store that sold you the tool.

Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.

7

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

A

OPERATING INSTRUCTIONS

WARNING! Do Not USe tHe PRoDUct

WItHoUt AttAcHING tHe GUARD AND fRoNt HANDle.

INteNDeD USe

The machine is intended for cutting and trimming hedges and bushes in domestic use.

E

1. GUARD ASSeMBly

Fig A; making sure it is securely attached.

Use two screws to fix the Safety Guard securely.

2. fRoNt HANDle (3) ASSeMBly

The Front Handle must be assembled before use:

1) Attach the handle to the housing, aligning the mark to housing and handle(See Fig. B,C,D).

2) Insert the locking bolt into the handle and fully tighten the bolt. (See Fig. E )

3) Check whether handle is firmly secured, if not retighten the locking bolt.

F

J

8

B

C

G

K

D

H

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

9

8

3. BefoRe USING yoUR coRDleSS HeDGe tRIMMeR

WARNING! The charger and battery pack are specially designed to work together so do not attempt to use any other devices. Never insert or allow metallic objects into your charger or battery pack connections because of an electrical failure and hazard will occur.

Your battery pack is UNCHARGED and you must charge once before use.

battery installed in the machine. Do not use another battery charger.

4. cHARGING yoUR BAtteRy PAck

The Li-Ion battery is protected against deep discharging.

When the battery is empty, the machine is switched off by means of a protective circuit: In a warm environment or after heavy use, the battery pack may become too hot to permit charging. Allow time for the battery to cool down before recharging.

5. to ReMove oR INStAll BAtteRy PAck

(See fig. f) battery pack from your hedge trimmer. After recharging, insert the battery pack into trimmer’s battery port. A simple push and slight pressure will be sufficient. Check to see if the battery is fully secured.

6. StARtING AND StoPPING

BefoRe StARtING yoUR HeDGe tRIMMeR

Remove Blade Sheath (9).

to StARt yoUR HeDGe tRIMMeR

Your hedge trimmer is equipped with two Switch Levers

(5 & 6). Both Switch Levers need to be pressed for the hedge trimmer to start. Depress and hold the Front

(See Fig. G).

to StoP yoUR HeDGe tRIMMeR

Move hedge trimmer away from cutting area before stopping.

To stop, release one of the switch levers (See Fig. H).

WARNING: If any parts are missing, damaged or broken, do not operate your hedge trimmer until all damaged parts have been replaced or repaired. failure to do so could result in serious personal injury. Do Not USe WItHoUt

HANDle AND GUARD

D

Cordless Li-Ion

Hedge Trimmer

E

F

G

I

J

9

K

H

WG255E

WG255E.5

C

D

A

B

E

F

G

H

10

J

I

K

Cordless Li-Ion

Hedge Trimmer

7. HoW to USe yoUR HeDGe tRIMMeR

Note that the front switch lever can be activated on three sides, giving you many choices for a comfortable grip.

Before cutting an area, inspect it first and remove any foreign objects that could become thrown or entangled in the blades. Always hold the trimmer with both hands and with the blade away from you before turning it on.

When trimming new growth, use a wide sweeping action so that the stems are fed directly into the blade.

(See Fig. I & J)

Allow the cutting blades to reach full speed before cutting. When operating, keep the cutting blades away from people and objects such as walls, large stones, trees, vehicles, etc.

If the blade stalls, immediately stop the trimmer. Release the two Switch Levels (5 & 6) before attempting to clear jammed debris from the cutting blades.

Wear gloves when trimming thorny or prickly growth.

Do not attempt to cut stems that are too thick for the cutting blade.

toP cUttING

Use a wide sweeping motion (See Fig. I). A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results.

SIDe cUttING

When trimming the sides of the hedge, begin at the bottom and cut upwards (See Fig. J), tapering the hedge inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth.

8. cleANING

REMOVE THE BATTERY PACK. Use a soft brush to remove debris from all air intakes and cutting blade.

Wipe the surface with a dry cloth.

WARNING: Never use water for cleaning your trimmer. Do not clean with chemicals, including petrol, or solvents as this may damage your trimmer.

lUBRIcAtING tHe cUttING BlADe

For easier operation and longer life, lubricate the cutting blades before and after each use. Before lubricating, make sure the battery is removed from the trimmer. Apply oil between the two blades periodically (See Fig. K).

At tHe eND of tHe cUttING SeASoN

Clean your trimmer thoroughly.

Check that all nuts and bolts are secure.

Visually inspect the trimmer for any worn or damaged parts.

WG255E

WG255E.5

11

10

MAINTENANCE

Remove battery before carrying out any adjustment, servicing or maintenance.

There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

11

Cordless Li-Ion

Hedge Trimmer

WG255E

WG255E.5

Copyright © 2013, Positec. All Rights Reserved.

2CHT06EPK11005A0