HP ProLiant BL490c Generation 7 Server Blade

QuickSpecs

Overview

HP ProLiant BL490c Generation 7 Server Blade

1.

2.

Access Panel

Internal USB connector

3.

Internal SD card slot

4.

HP ProLiant BL490c G7 Server Blade

5.

Embedded Dual Port FlexFabric 10GbE Converged

Network Adapter

Two (2) mezzanine I/O expansion slots

6.

Up to two (2) Intel® Xeon® 5600 or 5500 series processors

NOTE: SSD Drives placed on baffle above processors;

See storage illustration for more details.

7.

Local I/O connector

8.

Eighteen (18) DDR3 DIMM Memory Slots

DA - 13711 Worldwide QuickSpecs — Version 8 — 4/5/2011 Page 1

QuickSpecs


Overview

What's New

Support for HP Smart Array P712m/ZM 2-ports Int PCIe x8 SAS Controller

Support for HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller

At A Glance

The HP ProLiant BL490c G7 Virtualization Blade raises the bar for memory capacity and I/O bandwidth in a half-height blade. Coupling up to 2 Intel® Xeon® processors with 18 DIMM slots and support for up to 24 NICs, the BL490c G7 gives enterprise data center managers the ideal server platform for hosting virtual machines.

This document covers the HP ProLiant BL490c G7 server blade only. For more information on HP BladeSystems c-Class

Enclosure and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:

HP BladeSystem c-Class Enclosures QuickSpecs:

HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html


HP BladeSystem c-Class Interconnect and Mezzanine Components: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html

http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html

The HP ProLiant BL490c G7 is a 2-processor server blade optimized for virtualization with high memory capacity and high bandwidth and flexible networking.

HP ProLiant BL490c G7 server blade includes:

Processor:

Up to two (2) Intel® Xeon® 5600 Series processors

Intel® 5520 Chipset

Memory:

Eighteen (18) DIMM slots

Up to 384GB, using PC3-10600R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel in 12 of the 18 slots

Up to 48GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12of the18 slots

Storage Controller:

HP Embedded SATA RAID Controller

NOTE: This is a chipset SATA RAID controller. It supports RAID 0 and 1 only and no Battery Backed Write

Cache. User needs to enable the RAID option through HP RBSU (ROM Base Setup Utility) first before the

RAID can be activated. Users also need to download the OS driver from: http://www.hp.com/support/BL490cG7 for OS Array Monitoring.

NOTE: HW RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage

Controller options section below.

Internal Drive Support:

Up to two (2) non-hot plug SATA Solid State Drives (SSD)

With an attached SB40c Storage Blade, up to six (6) hot plug SFF Serial Attached SCSI (SAS) or SATA

Hard Drives (optional)

Network Controller:

Integrated NC553i Dual Port FlexFabric 10GbE Adapter supporting stateless TCP/IP offload, TCP Offload

Engine (TOE), Fibre Channel over Ethernet (FCoE) and iSCSI protocols


QuickSpecs


Overview

NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric

10Gb/24-port Module. Learn more at: www.hp.com/go/virtualconnect .

NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed.

One (1) additional 10/100 server adapter dedicated to iLO 3 Management

Mezzanine Support:

Two (2) I/O expansion mezzanine slots

Supports up to two (2) mezzanine cards

Dual Port FlexFabric Adapter mezzanine option

Dual-Port Fibre Channel Mezzanine options for SAN connectivity (Choice of Emulex ,QLogic or

Brocade) iSCSI Ethernet mezzanine option for optimized iSCSI connectivity

Ethernet server adapter mezzanine options for additional network ports

InfiniBand (IB) Mezzanine options for low latency and high bandwidth server interconnectivity

Storage Controller mezzanine options for additional internal and external storage connectivity

I/O Accelerator mezzanine options for high transaction rate local storage

SAS mezzanine option for external direct attach and shared SAS storage

Internal USB Support:

One (1) internal USB 2.0 connector for security key devices and USB drive keys

One (1) internal SD-HC Card slot

Trusted Platform Module:

One (1) internal TPM 1.2 module connector

Form Factor:

HP ProLiant BL490c G7 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures

Infrastructure Management:

This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html

HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.

HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.

HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements

Operating Systems:

Supports Windows, RHEL, SLES, Solaris, VMware, and Citrix XenServer

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization

Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page

Enclosures:

HP offers three different c-Class server blade enclosures to meet your individual needs:

The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL490c G7 servers plugged vertically.

The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL490c G7 servers plugged horizontally.

Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard

Administrator modules are all designed to fit into the c3000 and c7000 enclosures.

For additional enclosure information, please see:


QuickSpecs


Overview

http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html

.

NOTE: For optimal cooling and system performance the BL490c G7 requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to be configured with 6 fans.

Warranty:

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.

Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.

NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)

Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html


QuickSpecs

Standard Features


NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information

- Factory Integrated Models" section.

Processor Six Core Processors

Intel® Xeon® Processor X5675 (3.06 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo

2/2/2/2/3/3)


2/2/2/2/3/3)


2/2/2/2/3/3)

Intel® Xeon® Processor E5649 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1333, HT, Turbo

1/1/1/1/2/2)

Intel® Xeon® Processor L5640 (2.26 GHz, 12MB L3 Cache, 60W, DDR3-1333, HT, Turbo

2/2/3/3/4/4)

Four Core Processors


2/2/3/3)

Intel® Xeon® Processor L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT, Turbo

1/1/2/2)

NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.

NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo

Boost Technology, with 4, 3, 2, and 1 cores active on four core 5600 series processors or with

6,5,4,3,2,1 cores active on six core 5600 series processors.

NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

NOTE: For the Intel 5600 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes

Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.

Upgradeability

Cache Memory

Chipset

Upgradeable to two (2) processors

12MB shared L3 cache

Intel® 5520 Chipset


QuickSpecs


Standard Features

Memory

Type

Standard

Maximum (RDIMM)

DDR3 Registered (RDIMM) or Unbuffered (UDIMM)

6 GB (3 x 2GB) RDIMM and 12GB (3 x 4GB) RDIMM

384 GB (12 x 32 GB) for Registered Memory configurations

Maximum (UDIMM) 48 GB (12 x 4 GB) for Unbuffered Memory configurations

NOTE: A minimum of 2GB of memory must be installed.

NOTE: Depending on the memory configuration and processor model the memory speed may run at 1333MHz, 1066MHz or 800MHz. Please see the Online Memory Configuration Tool for details; www.hp.com/go/ddr3memory-configurator

DDR3 memory options part number decoder

Memory Protection

Advanced ECC (multi-bit error protection)

Memory Mirroring Mode

Memory Lock-Step Mode

Memory Online Spare Mode supported on Xeon 5600 Series processors

Network Controller

Integrated NC553i Dual Port FlexFabric 10Gb Adapter

NOTE: FlexFabric capability requires the use of an HP Virtual Connect Flex-Fabric module.

Learn more at: www.hp.com/go/virtualconnect .

NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual

Connect FlexFabric 10Gb/24-port Module. Learn more at: www.hp.com/go/virtualconnect .

One (1) additional 10/100 NIC dedicated to iLO 3 Management

I/O Expansion Slots

Two (2) I/O expansion mezzanine slots (x8 PCI Express)

Integrated

Manageability

HP Integrated Lights-Out 3 (iLO 3) management processor


QuickSpecs


Standard Features

Storage Controller

HP Embedded SATA RAID Controller

NOTE: This is a chipset SATA RAID controller. It supports RAID 0 and 1 only and no Battery

Backed Write Cache. User needs to enable the RAID option through HP RBSU (ROM Base

Setup Utility) first before the RAID can be activated. Users also need to download the OS driver from: http://www.hp.com/support/BL490cG7 for OS Array Monitoring.

NOTE: HW RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage Controller options section below.

Maximum Internal

Storage

Non-Hot Plug SATA

SSD

240GB 2 x 120GB

Hot Plug SFF SAS 1.8TB

6 x 300GB

NOTE: Hot Plug SFF SAS maximum internal storage supported with optional SB40c Storage

Blade attached.

Graphics

Integrated Matrox G200

Graphics Resolution

Supported

Resolution Color Depths 1600 x 1200, 64K, 256, 16

1280 x 1024, 16.7M, 64k, 256, 16

1024 x 768, 16.7M, 64k, 256, 16

800 x 600, 16.7M, 64k, 256, 16

640 x 480, 16.7M, 64k, 256, 16

NOTE: Maximum resolution available via HP Integrated Lights-Out 3

(iLO 3) remote console is 1280 x 1024.

Fibre Channel Support Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL490c G7. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre

Channel HBAs are available via option kits and must be ordered separately.

HBA mezzanine card option kits:

Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403621-

B21)

Based on the same field-proven ASIC, firmware, and driver technology as Emulex's renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all

Emulex HBAs

Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 456972-

B21)

Exceptional performance, enhanced security, and scalable management for virtual server and enterprise-class applications

QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403619-

B21)

Uses common drivers which means that customers can standardize on one QLogic driver whether they are using the QMH2462 or other HBAs powered by QLogic

QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 451871-

B21)


QuickSpecs

Standard Features


Provides a first step into the 8Gb future, advanced, embedded support for virtualized environments and reduced power consumption

HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter (PN 590647-B21)

Application oriented Quality of Service (AQoS) providing the ability to configure, prioritize, and optimize traffic flows from virtual machines and/or applications to the target port

Brocade, Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:

Optimal performance utilizing PCI Express

4/2/1Gb/s auto negotiating speeds (4Gb HBAs)

8/4/2Gb/s auto negotiation speeds (8Gb HBAs)

Dual-ports for redundant path connections

Up to two FC HBAs per server blade providing redundant FC HBA support

Optimized for HP StorageWorks and supported by third party SAN vendors

Support for Microsoft® Windows® and Linux operating system environments

Compatible SAN

HP ProLiant BL490c G7 server blades are optimized for HP StorageWorks MSA, EVA and XP

HP ProLiant BL490c G7 server blades are compatible with select 3rd party SANs (please see blade storage page for more details: http://h18004.www1.hp.com/products/blades/components/c-class-sans.html

HP Virtual Connect

HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 and

FlexFabric technologies make maximum use of network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and infrastructure requirements. HP

Virtual Connect Enterprise Manager (VCEM) provides a central console to administer network connections and workloads for thousands of servers. For more information on Virtual Connect

Ethernet, Fibre Channel, Converged Network and management options see: www.hp.com/go/virtualconnect

HP Insight management software

HP Insight Foundation Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecycle. This provides the customer with higher levels of operational efficiency and highly reliable systems: http://www.hp.com/go/foundation .

The foundation pack includes:

HP SmartStart

HP Management DVD

HP ProLiant Smart Update Firmware DVD

SmartStart version supported (minimum): SmartStart 8.50.

http://www.hp.com/servers/smartstart


QuickSpecs

Standard Features


HP Integrated Lights-

Out

HP Insight Control

NOTE: In an effort to support reducing our environmental impact, the

HP Insight Foundation Suite for ProLiant media will be available as a selectable option for this server at time of order of a Factory

Integrated Model. This will allow customers to order the number of media kits that best meet their needs and eliminate receiving unnecessary duplicate media.

HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP iLO functions without additional software and can be accessed from any location via a web browser. HP iLO works hand-in-hand with HP Systems Insight

Manager, Insight Control suites, and Insight Dynamics for ProLiant, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service. For more information, visit: www.hp.com/go/iLO

HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.

Two versions of Insight Control are available, to serve environments requiring either a Linux-based or a Windows-based central management server: HP Insight Control for Linux, and HP Insight

Control. See www.hp.com/go/insightcontrol

HP Insight Control includes one year of 24 x 7 HP Software Technical

Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight .

HP Insight Dynamics for

ProLiant

HP Insight Dynamics for ProLiant, a product option, is advanced infrastructure management software that enables IT staff to instantly adjust their environments to meet dynamic business demands by provisioning, optimizing and protecting complex infrastructure in minutes. It's a powerful toolkit, integrated-by-design, that accelerates complex technology projects and simplifies daily operations, transforming data center economics. With Insight Dynamics IT professionals can plan capacity and power continuously, balance workloads across physical and virtual resources, and ensure costeffective high availability. It also enables IT organizations to provision infrastructure consistently and automatically from pools of shared resources using a self-service portal. Resources provisioned can range from a single virtual machine to complex multi-tier environments and their associated physical and virtual resource requirements. In addition to the previous functional benefits, it also provides a costeffective disaster recovery for physical and virtual environments that works with HP StorageWorks Continuous Access software for both the Enterprise Virtual Array and the XP storage array allowing application environments to be reactivated in minutes with the touch of a button to a remote location.

NOTE: For more information, visit: http://www.hp.com/go/insightdynamics


QuickSpecs

Standard Features


High Performance

Clusters

HP Cluster Platforms HP Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters optimized for High Performance

Computing, with a choice of servers, networks and software.

Operating system options include specially priced offerings for Red

Hat Enterprise Linux and Novell SLES, as well as Microsoft Windows

HPC Server. A Cluster Platform Configurator simplifies ordering.

http://www.hp.com/go/clusters

HP HPC Interconnects High Performance Computing (HPC) interconnect technologies are available for this server as part of the HP Cluster Platform portfolio.

These high-speed InfiniBand and Gigabit interconnects are fully supported by HP when integrated within an HP cluster. Flexible, validated solutions can be defined with the help of configuration tools.

http://www.hp.com/techservers/clusters/ucp/index.html

HP Cluster Management

Utility

HP Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used to manage large-scale Linux

ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective.

http://www.hp.com/go/cmu

HP HPC Linux Value

Pack

HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HPsupported specially priced software bundle for the development and deployment of applications on HPC Cluster Platforms. Value Pack includes the Platform HPC Enterprise Edition suite of tools including the LSF workload scheduler, the HP-MPI parallelization library. Also included are the HP Unified Parallel C compiler and the HP Shmem library, as well as the execution environments for the libraries and compiler. HP HPC Linux Value Pack

Operating Systems and Virtualization

Software Support for

ProLiant Servers

Microsoft Windows Server

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

Solaris

VMware

Citrix XenServer

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and

Virtualization Software and latest listing of software drivers available for your server, including how to purchase from HP, please visit our OS Support at: http://www.hp.com/go/ossupport and our driver download page http://www.hp.com/support/BL490cG7

Availability

Dual-port embedded 10 Gigabit adapters for redundant network connections

Two (2) non hot-plug SATA SSD with integrated chipset RAID

Redundant ROM

Advanced ECC Memory

Support for Memory Mirroring Mode and Memory Lock-Step Mode

Support for Memory Online Spare Mode with Xeon 5600 Series processors

Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)


QuickSpecs

Standard Features

Industry Standard

Compliance

ACPI V2.0 Compliant

PCI 2.2 Compliant

WOL Support

Microsoft® Logo certifications

USB 2.0 Support

IMPI 2.0 Compliant

SMASH CLP Compliant


Security

Security - Trusted

Platform Module

Power-on password

Administrator's password

Integrated Lights-Out 3 with:

12 customizable user accounts

SSL encryption

Secure Shell version 2

Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting interface

AES and RC4 encryption of video

Disable via a global setting

Keyboard password

External USB port enable/disable

Network server mode

Serial interface control

TPM (Trusted Platform Module) 1.2 option

The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline.

NOTE: For more information about TPM, including a white paper, go to: http://www.hp.com/go/TPM

NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.

NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing the key could result in data loss.


QuickSpecs


Standard Features

Factory Express

Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP

BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services on your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express .

HP Enterprise

Configurator

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. For additional information please visit: http://www.hp.com/products/configurator


QuickSpecs

Service and Support


Service and Support HP Technology Services for Industry Standard Servers and BladeSystem

Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.

What HP ProLiant and BladeSystem Services can do for you

HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift of base warranty. You can get the support you need by choosing from one of a number of service packaged solutions we have designed to address wider set of customer support needs:.

HP Technology Services meets business challenges with services offered in three packages

Optimized Care Package, Standard Care Package, and Basic Care Package - available for each product group. Such packaged solutions enable customers to optimize technology operations, minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support packages for servers, storage, networking and software.

Optimized Care

Package

Supports maintaining servers at optimum performance availability

HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure

Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP,

PMP and VPM.

http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW

3-Year HP Critical Advantage for c3000/c7000 enclosure + 3-Year HP Critical Advantage for Blade server

Provides end-to-end infrastructure support solution for business critical applications running on virtualized/x86 infrastructures, enabling the customers to cost effectively build, operate, and continuously improve their IT environment.

http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA3-1772ENW

HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network

HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate proper implementation of network protocols and access to advanced features.

http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW

Additional Services: Virtualization Services - Strategy, Design, Transition, Operation,

Continual Service Improvement.


QuickSpecs



Standard Care

Package

Package that maintains high level of server availability



PMP and VPM.


HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network

HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate proper implementation of network protocols and access to advanced features.

http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW

3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for c3000/c7000 enclosure + 3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for Blade server

Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the system to help return the hardware to operating condition within 6 hours of the initial service request to the HP Global Solution Center.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN

3-Year , HP 24x7 Software Support for Insight Control

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf

Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation &

Start Up and Software Support); Microsoft or Linux or VMware education courses; +60

Proactive Select Credits, Factory Express.

Basic Care Package Delivers minimum recommended support service level



PMP and VPM.


3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for c3000/c7000 enclosure + 3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for

Blade server

Provides you with rapid remote support and if required an HP authorized representative who will arrive on site any time and day of the year to begin hardware maintenance service within 4 hours of the service request being logged.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE

3-Year , HP 24x7 Software Support for Insight Control

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf


QuickSpecs



Additional Services: Startup Blade System c-Cass Enhanced Network Service; Software OS

(Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up and Software Support); +30

Proactive Select Credits, Factory Express.

Insight Remote

Support

The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable 24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all warranty, HP Care Pack Service, and service agreement customers.

For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/bladesystem


QuickSpecs

Models


Models

NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information

- Factory Integrated Models" section.

HP ProLiant BL490c

G7 X5675 1P 12GB-R

Server

637392-B21


G7 X5670 1P 12GB-R

Emb SATA Server

603599-B21

Processor(s)

One of the following depending on model

(1) Intel® Xeon® Processor X5675 (3.06 GHz, 12MB L3 Cache, 95W,

DDR3-1333, HT, Turbo 2/2/2/2/3/3)

One (1) Intel ® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache,

95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)

One (1) Intel® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache,

95W, DDR3-1333, HT, Turbo, 2/2/2/2/3/3)

One (1) Intel® Xeon® Processor L5630 (2.13 GHz, 12MB L3 Cache,

40W, DDR3-1066, HT, Turbo, 1/1/2/2)

(1) Intel® Xeon® Processor E5649 (2.53 GHz, 12MB L3 Cache, 80W,

DDR3-1333, HT, Turbo1/1/1/1/2/2)


G7 X5650 1P 6GB-R

Emb SATA Server

603602-B21

Cache Memory

Memory

One of the following depending on model

12MB

12 GB (3 x 4 GB) PC3-10600 (DDR3-1333) Registered DIMMs

6 GB (3 x 2 GB) PC3-10600 (DDR3-1333) Registered DIMMs

12GB (3 x 4 GB) PC3L-10600 (DDR3-1333) Low Voltage Registered

DIMMs


G7 L5630 1P 12GB-L

Emb SATA Server

603605-B21

Network Adapter

Storage Controller

Embedded NC553i Dual Port FlexFabric 10GbE Adapter and one (1) additional 10/100 server adapter dedicated to iLO 3 Management

HP Embedded SATA chipset RAID


G7 E5649 1P 6GB-R

Server

637615-B21

Hard Drives

Internal Storage

Optical Drive

Power Supply

Form Factor

None ship standard

SSD: Up to 240GB (2 x 120GB) SATA, Maximum

None

None

Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure

Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure


QuickSpecs


Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.

NOTE: HP does not allow factory integration of options into standard models listed above.

Configure-to-order server blades must start with a CTO Blade.

NOTE: FIO indicates that this option is a Factory Installable Option.

Step 1: Base Server Blade Configuration (Select a configurable Blade)

Models HP ProLiant BL490c G7 Configure-to-order Server

Configurable Model ships with:

Integrated NC553i Dual Port FlexFabric 10Gb Adapter and one (1) additional

10/100 server adapter dedicated to iLO 3 management

Integrated Lights-Out 3 Standard Blade Edition

603719-B21

Step 2: Choose Required Options (one of the following from each list unless otherwise noted)

HP Processors For single processor configuration choose:

NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-

B21.

637437-L21

HP Memory

Six-Core Processor Option Kits

HP BL490c G7 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) FIO

Processor Kit


Processor Kit


Processor Kit

HP BL490c G7 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) FIO

Processor Kit

HP BL490c G7 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) FIO

Processor Kit

Four-Core Processor Option Kits


Processor Kit

HP BL490c G7 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) FIO

Processor Kit

Registered DIMMS (RDIMMs)

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9

Memory Kit


Memory Kit

HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9

Memory Kit

HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9

Low Power Memory Kit

NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.

603600-L21

603603-L21

637441-L21

612892-L21

637439-L21

603606-L21

500656-B21

500658-B21

593339-B21

604504-B21


QuickSpecs


Configuration Information - Factory Integrated Models


Memory Kit

HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9




LP Memory Kit

HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7

Memory Kit

HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7

LP Memory Kit

Unbuffered with ECC DIMMs (UDIMMs)

HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9

Memory Kit

HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9

Memory Kit


Memory Kit

NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3

Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator .

NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energyefficient .

NOTE: PC3L is a low voltage memory.

500662-B21

604506-B21

627812-B21

500666-B21

627814-B21

500668-B21

500670-B21

500672-B21

Step 3: Choose Additional Options for Factory Integration

NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options, including server blade enclosures interconnect and mezzanine options and power subsystem options; please see the Core Options and Additional Options sections below; or the following:

HP BladeSystem c-Class Enclosures QuickSpecs:



and HP BladeSystem c-Class Interconnect and Mezzanine Components: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html

http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html


QuickSpecs

Core Options


NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional information.

HP Ethernet

Mezzanine Options

Gigabit Ethernet Mezzanines

HP NC325m PCI Express Quad Port Gigabit Server Adapter

NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on 2 of the 4 ports.

416585-B21

447883-B21 HP NC364m Quad Port 1GbE BL-c Adapter

NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be provided on only 2 of the 4 ports.

HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter

NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000

Mbps, full duplex per port only. For more information, see the "Network

Controller" segment in the Standards Features section.

10 Gigabit Ethernet Mezzanines

453246-B21

NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000

Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).

NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.

NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or

10000Mbps when not connected to a Flex-10 enabled module and will link with all current 1Gb switches at 1Gb.

NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE (Fibre Channel over Ethernet). Note that a HP Virtual

Connect profile takes precedence over the setting in this menu. Also, some

FlexFabric Adapters may require that network boot be enabled in order to configure the protocol. If the protocol is configured without enabling network boot with certain FlexFabric Adapters, the protocol may not take effect. Once the protocol has taken effect on the first boot after configuring this option, network boot may be disabled if desired.

HP NC532m Dual Port 10GbE BL-c Adapter

HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter

HP BLc NC552m Flex-10GbE Dual Port Adapter

HP NC553m 10Gb 2-port FlexFabric Converged Network Adapter

467799-B21

539857-B21

610609-B21

613431-B21

HP Fibre Channel

Mezzanine Options

Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class

BladeSystem

Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class

BladeSystem

QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class

BladeSystem

QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class

BladeSystem

HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter

456972-B21

403621-B21

451871-B21

403619-B21

590647-B21


QuickSpecs

Core Options

HP Processors


Six-Core Processors

HP BL490c G7 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) Processor

Kit


Kit


Kit

HP BL490c G7 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) Processor

Kit

HP BL490c G7 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) Processor

Kit

Four-Core Processors


Kit

HP BL460c G7 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) Processor

Kit

NOTE: When upgrading or ordering spares for CPU 1, reuse the heatsink that was originally shipped with CPU 1 and ensure sufficient thermal grease is applied.

637437-B21

603600-B21

603603-B21

637441-B21

612892-B21

637439-B21

603574-B21

HP Memory Registered DIMMs (RDIMMs)


Memory Kit


Memory Kit


Memory Kit

HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-

9 Low Power Memory Kit



Memory Kit




HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered

CAS-9 LP Memory Kit


Memory Kit

HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-

7 LP Memory Kit

Unbuffered with ECC (UDIMMs)


Memory Kit


Memory Kit

DA - 13711 Worldwide QuickSpecs — Version 8 — 4/5/2011

500656-B21

500658-B21

593339-B21

604504-B21

500662-B21

604506-B21

627812-B21

500666-B21

627814-B21

500668-B21

500670-B21

Page 20

QuickSpecs

Core Options



Memory Kit



NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see: http://h18004.www1.hp.com/products/servers/platforms/energyefficient/


500672-B21

HP Hard Drives

NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

Solid State Drives (SSD)

HP 120GB 3G SATA SFF (2.5-inch) Non-hot plug Midline 1yr Wty Solid State

Drive

HP 60GB 3G SATA SFF (2.5-inch) Non-hot plug Midline 1yr Wty Solid State

Drive

NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13121_div/13121_div.html

572077-B21

572075-B21


QuickSpecs

Additional Options


HP Insight software HP Insight Control

HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic

License

HP Insight Control including 1yr 24x7 Technical Support and Updates Single

Server License

HP Insight Software Media Kit

NOTE: Insight Software DVD media without licenses. Contains Insight Control,

Insight Dynamics and Virtual Connect Enterprise Manager. Uses an integrated installer to perform quick and accurate software installation and updates.

NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .

NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key, and is available in all countries except China and Japan.

Customers in China and Japan should order the physical equivalent.

NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s).

Includes one year of 24 x 7 HP Software Technical Support & Update Service.

NOTE: For additional license kits, including bundles with HP BladeSystem enclosures, please see the Insight Control QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html

HP Insight Control for Linux

HP Insight Control for Linux including 1yr 24x7 Support Electronic License

HP Insight Control for Linux including 1yr 24x7 Support Single Server License

HP Insight Control for Linux Media Kit

NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be ordered separately, or can be downloaded at: http://www.hp.com/go/iclinux (click on Download button).

NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key, and are available in all countries except China and Japan.



Includes one year of 24 x 7 HP Software Technical Support Service.

NOTE: For additional License Kits, including electronic licensing options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html

HP Integrated Lights-Out (iLO) Advanced for BladeSystem

HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic

License

HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server

License

NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .




T9074BAE

452148-B22

436222-B21

TC213AAE

TC209A

TC208A

TA851AAE

512488-B21


QuickSpecs



Includes one year of 24 x 7 HP Software Technical Support Service

NOTE: For additional license kits please see the HP Integrated Lights-Out

QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html

HP Insight Control server deployment

HP Insight Control Server Deployment including 1yr 24x7 Support Electronic

License

HP Insight Control Server Deployment including 1yr 24x7 Support Single Server

License

NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates .




Includes one year of 24 x 7 HP Software Technical Support Service.

NOTE: For additional license kits please see the Insight Control QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html

T9082AAE

452151-B21

QL803A

High Performance

Clusters

HP Cluster Management Utility

HP Cluster Management Utility Compute Node Flexible License

NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server).

Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.

HP Cluster Management Utility License and Media

NOTE: Order a minimum of one license per cluster to purchase media including software and documentation, which will be delivered to the customer, and also licenses CMU management. No license key is delivered or required.

NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html

HP HPC Linux Value Pack

HP High Performance Computing Linux Value Pack 1 Processor Flexible

License

NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one socket (a.k.a.

processor). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.

HP High Performance Computing Linux Value Pack Media Kit

NOTE: This part number can be used to purchase media including software and documentation, which will be delivered to the customer.

NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html

433257-B21

TC293B

TC294A


QuickSpecs



HP Security - TPM

HP Trusted Platform Module Option 488069-B21

HP Storage Controller HP Smart Array P700m Controller

HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller

HP Smart Array P700m/256 4-ports Ext PCIe x8 SAS Controller

NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at: http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html

(Worldwide)

HP Smart Array P711m Controller

HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller

NOTE: The P711m 1GB cache adds RAID 1+0 and 5.

HP Smart Array P712m Controller

HP Smart Array P712m/256 6Gb 2-ports Int/2-ports Ext Mezzanine SAS

Controller

HP Smart Array P712m/ZM 2-ports Int PCIe x8 SAS Controller

NOTE: Provides RAID support on internal non-hot plug SSDs.

NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at: http://h18000.www1.hp.com/products/quickspecs/13296_div/13296_div.html

(Worldwide)

Optional Upgrades

HP Smart Array P-Series Low Profile Battery

NOTE: Supports HP Smart Array P700m Controller.

HP 650 mAh P-series Low Profile Battery


HP 256MB P-series Cache Upgrade


HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and

Updates Single Server License

NOTE: A license key, a minimum of 256MB cache, and battery kit is required to enable Smart Array Advanced Pack features. For more information go to: http://www.hp.com/go/saap


(Worldwide)

508226-B21

507925-B21

513778-B21

488348-B21

484299-B21

452348-B21

575031-B21

462968-B21

516471-B21

HP I/O Expansion

Options

HP 640GB MLC IO Accelerator for BladeSystem c-Class

HP 320GB MLC IO Accelerator for BladeSystem c-Class


BK836A

AJ878B


QuickSpecs



HP c-Class Mezzanine

Options

HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class

BladeSystem

HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class

BladeSystem


583210-B21

592519-B21

HP Ultrium Tape

Blades

HP StorageWorks SB1760c Tape Blade

NOTE: LTO-4 Ultrium tape technology.


HP StorageWorks

Storage Blades

HP StorageWorks LTO-5 SB3000c Tape Blade


HP StorageWorks D2200sb PCIe Storage Blade

NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support the HP StorageWorks D2200sb PCIe Storage Blade with the BL620c G7. Up to two storage blades are supported per server mix and match (Ultrium Tape, D2200sb PCIe Storage, and/or PCI Expansion Blades).

NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in mezzanine slot 2 and/or 3.

NOTE: Please see the HP StorageWorks D2200sb PCIe Storage Blade

QuickSpecs for technical specifications and additional information at: http://h18006.www1.hp.com/storage/bladesystem/index.html

.

AQ697A

BS580A

AP880A

HP Expansion Blade

HP BLc PCI Expansion Blade

NOTE: Ships with one pre-installed PCI-X connect board. Also includes one

PCIe connect board which requires installation.

NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information: http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html

448018-B21


QuickSpecs



HP USB and SD

Options

HP USB 2-Button Optical Scroll Mouse

HP USB Standard Keyboard

HP 2GB USB Flash Media Drive Key

NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the VMware virtualization environment and other HP value-add software like SmartStart. HP recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware ESXi. Refer to HP VMware

Getting Started Guide for installation instructions.

HP 4GB SD Flash Media

NOTE: Blank SD media devices are supported for use with VMware and Citrix.

SD media must be installed in the internal slot of the ProLiant server. Learn more at: http://www.hp.com/go/proliantvirtualization

DC172B

DT528A#ABA

608447-B21

580387-B21

HP Care Pack Services

NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.

Hardware Services On-site Service

4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic

6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,

Electronic

UK065E

UK066E

UK067E


QuickSpecs

Memory


NOTE: Memory configurations listed do not apply to "Factory Integrated Models".

Memory Population Guidelines

For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator

Some DIMM installation guidelines are summarized below;

For the BL490c G7 server with eighteen (18) memory slots:

There are three (3) channels per processor; six (6) channels per server

There are three (3) DIMM slots for each memory channel; eighteen (18) total slots

Memory channel 1 consists of the three (3) DIMMs that are closest to the processor

Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor

DIMM slots that are white should be populated first

Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)

Do not install DIMMs if the corresponding processor is not installed

If only one processor is installed in a 2CPU system, only half of the DIMM slots are available

To maximize performance, balance the total memory capacity between all installed processors

It is not required, but it is recommended to load the channels similarly if possible

If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel

You can only install two quad-rank DIMMs per channel

You can only install two UDIMMs per channel; the third slot in the channel must remain empty

Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel

Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor

For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically

For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system

Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.

If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of supporting 1.5V operations

DIMM slot/capacity/populated speed table

DIMM Type

DIMM Rank

DIMM Capacity

DIMM Native

Speed (MHz)

DIMM Voltage

Registered DIMMS (RDIMMs)

Unbuffered with ECC

DIMMs (UDIMMs)

Single

Rank

(1R) Dual Rank (2R) Quad Rank (4R)

Single

Rank

(1R) Dual Rank (2R)

4GB 2GB 4GB 8GB 8GB 16GB 4GB 16GB 32GB 1GB 2GB 4GB

1333

LV/Std

1333

Std

1333

Std

SLOTS THAT CAN BE POPULATED

18 slot servers 18 18 18

1066

Std

18

1333

LV/Std

18

1333

LV

18

1066

Std

12

1066

Std

12

1066

LV

12

1333

Std

12

1333

Std

12

1333

Std

12

MAXIMUM CAPACITY (GB)

72 36

POPULATED DIMM SPEED (MHz)

1 DIMM Per

Channel

1333 1333

72

1333

144

1066

144

1333

288

1333

48

1066

192

1066

384

1066

12

1333

24

1333

48

1333


QuickSpecs


Memory

2 DIMM Per

Channel

3 DIMM Per

Channel

NOTES:

1333 1333 1333 1066 1333 1333 800 800 800 1066 1066 1066

800 800 800 800 800 800 n/a n/a n/a n/a n/a n/a

PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz

Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities

If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system even if the slower DIMM is on the other processor

If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be

1066MHz

If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, the maximum speed will be 1066MHz

If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz

Maximum memory speed will also depend on the processor installed

References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc

HP ProLiant BL490c G7 Server Blade DIMM slot and configuration diagrams

Basic memory slot & population diagram

Chnl 1

Chnl 2

Chnl 3

Population order; start with "A" first, "B" second, "C" third, etc.

slot #

1

2

4

5

3

6

7

8

9

CPU1

18 DIMM SLOTS (9 per CPU node)

population order

G

D slot #

1

2

CPU2

population order

G

D

Chnl 1

I

F

B

H

E

A

C

3

4

5

6

7

8

9

I

A

H

E

B

F

C

Chnl 2

Chnl 3

HP ProLiant BL490c G7 Server Blade (1P Model)

Standard memory configuration (1 CPU model)

6GB (3 x 2GB) of PC3-10600 (DDR3-1333) RDIMMs


QuickSpecs


Memory

Chnl 1

Chnl 2

Chnl 3 7

8

9

6

4

5 slot #

3

1

2

CPU1

population order

G: empty

D: empty

A: 2GB DIMM

H: empty

E: empty

B: 2GB DIMM

I: empty

F: empty

C: 2GB DIMM

Standard memory plus optional memory (1 CPU model)

Chnl 1

54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs

3x 2GB dual-rank PC3-10600 RDIMMs

6x 8GB dual-rank PC3-8500 RDIMMs

Chnl 2

Chnl 3 7

5

6

8

9 slot #

1

4

2

3

CPU1

population order

G: 8GB DIMM

D: 8GB DIMM

A: 2GB DIMM

H: 8GB DIMM

E: 8GB DIMM

B: 2GB DIMM

I: 8GB DIMM

F: 8GB DIMM

C: 2GB DIMM

7

5

6

8

9 slot #

1

4

2

3

Standard Memory Replaced with Optional Memory (1 CPU model)

RDIMM maximum configuration

96GB, consisting of nine (9) 16GB quad-rank PC3-8500 RDIMMs

7

8

9

6

4

5 slot #

3

1

2

CPU2

population order

Chnl 1 G: empty

D: empty

A: empty

Chnl 2 H: empty

E: empty

B: empty

Chnl 3 I: empty

F: empty

C: empty

CPU2

population order

G: empty Chnl 1

D: empty

A: empty

H: empty Chnl 2

E: empty

B: empty

I: empty

F: empty

C: empty

Chnl 3


QuickSpecs


Memory

Chnl 1

Chnl 2

Chnl 3 7

8

9

6

4

5 slot #

3

1

2

CPU1

population order

G: empty

D: 16GB DIMM

A: 16GB DIMM

H: empty

E: 16GB DIMM

B: 16GB DIMM

I: empty

F: 16GB DIMM

C: 16GB DIMM

UDIMM maximum configuration (1 CPU model)

7

8

9

6

4

5 slot #

3

1

2

CPU2

population order

Chnl 1 G: empty

D: empty

A: empty

Chnl 2 H: empty

E: empty

B: empty

Chnl 3 I: empty

F: empty

C: empty

Chnl 1

Chnl 2

Chnl 3

24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs

7

5

6

8

9 slot #

1

4

2

3

CPU1

population order

G: empty

D: 4GB DIMM

A: 4GB DIMM

H: empty

E: 4GB DIMM

B: 4GB DIMM

I: empty

F: 4GB DIMM

C: 4GB DIMM

7

5

6

8

9 slot #

1

4

2

3

Standard Memory Replaced with Optional Memory (2 CPU Model)

RDIMM maximum configuration

CPU2

population order

G: empty Chnl 1

D: empty

A: empty

H: empty

E: empty

B: empty

I: empty

F: empty

C: empty

Chnl 2

Chnl 3

Chnl 1

Chnl 2

Chnl 3

384GB, consisting of twelve (18) 32GB quad-rank PC3L-8500 RDIMMs

7

8

6

9 slot #

1

2

4

5

3

CPU1

population order

G: empty

D: 32GB DIMM

A: 32GB DIMM

H: empty

E: 32GB DIMM

B: 32GB DIMM

I: empty

F: 32GB DIMM

C: 32GB DIMM

7

8

6

9 slot #

1

2

4

5

3

CPU2

population order

G: empty

D: 32GB DIMM

Chnl 1

A: 32GB DIMM

H: empty

E: 32GB DIMM

Chnl 2

B: 32GB DIMM

I: empty

F: 32GB DIMM

C: 32GB DIMM

Chnl 3


QuickSpecs


Memory

UDIMM maximum configuration (2 CPU model)

Chnl 1

Chnl 2

Chnl 3

48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs

8

9

7

5

6

4 slot #

1

2

3

CPU1

population order

G: empty

D: 4GB DIMM

A: 4GB DIMM

H: empty

E: 4GB DIMM

B: 4GB DIMM

I: empty

F: 4GB DIMM

C: 4GB DIMM

8

9

7

5

6

4 slot #

1

2

3

NOTE: Capacity references are rounded to the common Gigabyte values.

CPU2

H: empty

E: 4GB DIMM

B: 4GB DIMM

I: empty

F: 4GB DIMM

C: 4GB DIMM population order

G: empty Chnl 1

D: 4GB DIMM

A: 4GB DIMM

Chnl 2

Chnl 3

1GB = 1024MB

2GB = 2048MB

4GB = 4096MB

8GB = 8192MB

16GB = 16384MB

32GB = 32768MB

Following are memory options available from HP:

HP Memory Registered DIMMs (RDIMMs)


Memory Kit


Memory Kit


Memory Kit

HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9




Memory Kit





LP Memory Kit

500656-B21

500658-B21

593339-B21

604504-B21

500662-B21

604506-B21

627812-B21


QuickSpecs

Memory



Memory Kit

HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7

LP Memory Kit

Unbuffered with ECC (UDIMMs)


Memory Kit


Memory Kit


Memory Kit




500666-B21

627814-B21

500668-B21

500670-B21

500672-B21


QuickSpecs

Storage


1 Non Hot Plug Solid State Drive (SSD) Bay 1

2 Non Hot Plug Solid State Drive (SSD) Bay 2

Hard Drives

NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

SATA Non-Hot Plug Solid State Drives

Quantity

Supported

120GB 3G SATA SSD

60GB 3G SATA SSD

2

2

Position

Supported

1-2

1-2

Controller

HP Integrated SATA Controller

HP Smart Array P712m Controller

HP Integrated SATA Controller

HP Smart Array P712m Controller

External Storage

Quantity

Supported

XP Disk Array Systems Please see the

XP Disk Array

Systems

QuickSpecs below to determine configuration requirements

Position

Supported Host Controller or Adapter

External Please see the XP Disk Array Systems Quick Specs for the latest list of supported HBAs

HP StorageWorks XP10000 Disk Array: http://h18006.www1.hp.com/products/storageworks/xp10000/index.html

(Worldwide)

Enterprise Virtual Array

Systems

Please see the

XP Disk Array

Systems

QuickSpecs below to determine configuration requirements

External Please see the XP Disk Array Systems Quick Specs for the latest list of supported HBAs


QuickSpecs


Storage

HP StorageWorks Enterprise Virtual Array Family: http://h18006.www1.hp.com/products/quickspecs/12408_div/12408_div.html

(Worldwide)


QuickSpecs

Technical Specifications

System Unit


Dimensions (H x W x D) 7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)

(with bezel)

Weight

(approximate)

Maximum

(all hard drives and processors installed)

Minimum

(one hard drive and processor installed)

14.20 lb (6.44 kg)

10.75 lb (4.87 kg)

Power Specifications

For power specifications including Input Requirements, BTU Rating, and Power Supply Output, please see the HP BladeSystem c-Class

Enclosures QuickSpecs located at URL:

HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/

12790_div.html


12810_div.html

System Inlet

Temperature

Relative Humidity

(non-condensing)

Altitude

To review typical system power ratings use the HP BladeSystem Power

Sizer which is available via the online tool located at URL: http://www.hp.com/go/bladesystem/powercalculator

NOTE: For optimal cooling and system performance the BL490c G7 requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to be configured with 6 fans.

Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m

(1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.

Non-operating

Operating

Non-operating

Operating

System performance may be reduced if operating with a fan fault or above 30°C

(86°F).

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

10 to 90% relative humidity (Rh), 28°C

(82.4°F) maximum wet bulb temperature, non-condensing.

5 to 95% relative humidity (Rh), 38.7°C

(101.7°F) maximum wet bulb temperature, non-condensing.

3050 m (10,000 ft). This value may be limited by the type and number of options installed.

Maximum allowable altitude change rate is

457 m/min (1500 ft/min).


QuickSpecs



Acoustic Noise

Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

For acoustic noise specifications, please see the HP BladeSystem c-

Class Enclosures QuickSpecs located at URL:


12790_div.html


12810_div.html

HP Integrated Lights-

Out 3 (iLO 3) integrated on system board

Architecture

Processor

Upgradeability

Video Support

Interfaces

Memory

Operating System

Support

PCI Express based health and remote management ASIC

PCI Express RISC processor core running at 250MHz

Option firmware upgradeable via Flash ROM

1600 x 1200 DVR max resolution

One Ethernet network connection (10/100Mb/s)

128-MB DDR with ECC

Microsoft Windows 2008 R2

Microsoft Windows 2008 (32 bit and 64 bit)

Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)

Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)

Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)

SUSE LINUX Enterprise Server 11 (32bit and 64bit)

SUSE LINUX Enterprise Server 10 (32bit and 64bit)

VMware ESX 4.0

VMware ESX 3.5.0

Client System Support Microsoft Windows 7

Client Browser

Support

Command Line

Support

Security

Microsoft Windows XP Professional Edition

Microsoft Windows Vista Business and Ultimate Editions

Red Hat Enterprise Desktop 5.00

SUSE Linux Enterprise Desktop 11

SUSE Linux Enterprise Desktop 10

Microsoft Internet Explorer 8



Firefox 3.5 (on supported Windows and Linux systems)

Firefox 3.0 (on supported Windows and Linux systems)

Secure Shell and serial port access

Secure Socket Layer

Secure Shell version 2

Advanced Encryption Standard (AES) and Triple Data Encryption

Standard (3DES) on browser, CLP and XML scripting interface

AES encryption of video

RC4 encryption of video


QuickSpecs



Directory Support

Services

Active Directory v1.0 (Windows 2003)

Driver Support

HP ProLiant iLO3 Management Controller Driver Package

Management protocols supported

SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems

Management Architecture for Server Hardware Command Line Protocol

(SMASH CLP), HP RIBCL XML

Embedded HP NC553i

Dual Port FlexFabric

10Gb Adapter

Type

Integrated dual-port KR 10GbE with FlexFabric (FCoE or iSCSI) capability

Network Processor

ServerEngines BE3

Data Transfer Method

x8 PCI Express 2.0

Network Transfer Rate Two ports at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth

NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect components. Both ports will operate at the same speed.

NOTE: Each port on the NC553i adapter transmits from the server at 20

Gbps (theoretical) full duplex.

IEEE Compliance

802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap

10GBase-KR, and 802.3x flow control

Standard Features

ProLiant Teaming including Network Fault Tolerance, Transmit

Load Balancing, and Switch-Assisted Load Balancing

9K Jumbo frames (4K Jumbo frames when in FCoE mode)

Microsoft Windows Receive Side Scaling (RSS)

Optional accelerated iSCSI

Environment-friendly

Products and

Approach

End-of-life

Management and

Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.


QuickSpecs



© Copyright 2011 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon

Inside are trademarks of Intel Corporation in the U.S. and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.


HP ProLiant BL490c Generation 7 Server Blade

What's New

At A Glance

Models

Step 1: Base Server Blade Configuration (Select a configurable Blade)

Step 2: Choose Required Options (one of the following from each list unless otherwise noted)

Step 3: Choose Additional Options for Factory Integration

Related manuals

Table of contents