- Home
- Do-It-Yourself tools
- Power tools
- Paint Sprayer
- Graco
- 308369M, 5-, 10-, and 15-Gallon Pressure Tanks
- Instructions
advertisement
Instructions–Parts List
STAINLESS STEEL
5-, 10-, and 15-Gallon
Pressure Tanks
Industrial grade pressure tanks used to supply, agitate, and pressurize finishing liquids. For professional use only.
Maximum Air Inlet Pressure: 100 psi (0.7 MPa, 7 bar)
Maximum Working Fluid Pressure
Low-Pressure Regulated Tank: 15 psi (0.1 MPa, 1 bar)
(for HVLP or low–pressure, fine-adjustment applications)
High-Pressure Regulated Tank: 100 psi (0.7 MPa, 7 bar)
Tank Size gallons (liters)
5 (19)
10 (38)
15 (57)
Low-Pressure
Tank
Series B
236143
236144
236145
Low-Pressure Tank with Agitator
Series C
236146*
236147*
236148*
*These items are
0359 II 1/2 G T6
ITS03ATEX11251
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
High-Pressure
Tank
Series B
236149
236150, 243589
236151
308369M
ENG
High-Pressure Tank with Agitator
Series C
236152*
236153*
236154*
Low-Pressure Tank
03084A
03188C
Low-Pressure Tank with Agitator
High-Pressure Tank
03088A
ASME
03189C
High-Pressure Tank with Agitator
Table of Contents
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Typical Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Parts
Low-Pressure Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Low-Pressure Tanks with Agitator
High-Pressure Tanks
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
10
12
High-Pressure Tanks with Agitator . . . . . . . . . . . . . . 14
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
19
Graco Standard Warranty . . . . . . . . . . . . . . . . . . . . . . 20
Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.
Symbols
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.
WARNING
EQUIPMENT MISUSE HAZARD
INSTRUCTIONS
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
D
This equipment is for professional use only.
D
Read all instruction manuals, tags, and labels before operating the equipment.
D
Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
D
Do not alter or modify this equipment. Use only genuine Graco parts.
D
Check equipment daily. Repair or replace worn or damaged parts immediately.
D
Do not exceed the maximum working pressure of the lowest rated component in your system. The maximum working fluid pressure of the low-pressure regulated tanks is 15 psi (0.1 MPa, 1 bar).
The maximum working fluid pressure of the high-pressure regulated tanks is 100 psi (0.7 MPa,
7 bar)
D
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the
Technical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.
D
Always wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid and solvent manufacturer.
D
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
2ą 308369
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames, or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.
D
Ground the equipment and the object being sprayed. Refer to Grounding on page 5.
D
If there is any static sparking or you feel an electric shock while using this equipment, stop spray-
ing immediately. Do not use the equipment until you identify and correct the problem.
D
Do not use 1,1,1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents, or fluids containing such solvents in aluminum pumps. Such use could result in a serious chemical reaction, with the possibility of explosion.
D
Do not use kerosene or other flammable solvents or combustible gases to flush the unit.
D
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.
D
Keep the spray area free of debris, including solvent, rags, and gasoline.
D
Before operating this equipment, electrically disconnect all equipment in the spray area.
D
Before operating this equipment, extinguish all open flames or pilot lights in the spray area.
D
Do not smoke in the spray area.
D
Do not turn on or off any light switch in the spray area while spraying or while there are any fumes in the air.
D
Do not operate a gasoline engine in the spray area.
MOVING PARTS HAZARD
Moving parts, such as the rotating blades of the agitator, can pinch or amputate your fingers or other body parts and can cause splashing in the eyes or on the skin.
D
Keep clear of all moving parts when starting or operating the agitator.
D
Always shut off the agitator and disconnect the air line before adjusting the angle of the agitator, removing the agitator from the drum, or checking or repairing any part of the agitator.
HAZARDOUS VAPORS
Hazardous fluids or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, swallowed, or inhaled. When flushing the air motor, keep your face away from the exhaust port.
United States Government safety standards have been adopted under the Occupational Safety and Health Act. You should consult these standards –– particularly the General Standards, Part 1910, and the Construction Standards,
Part 1926.
308369 3
Typical Systems
Reference numbers and letters in parentheses in the text refer to references in the illustrations and the parts drawings.
See page 16 for Accessories that are available from Graco. Be sure that all accessories are properly sized to withstand the pressures in the system.
17
B
A
18
33
F
E
G
D
KEY
A Air supply hose
B Main air supply
C Ground clamp & wire
D Atomizing air hose
E Fluid hose
F Air spray gun
G Air regulator & filter:
1/4–18 npt outlets (2)
1/2–14 npt inlet
H Agitator air hose
4 Safety Valve
17 Air inlet ball valve; 1/4–18 npt(m)
18 Fluid outlet ball valve; 3/8–18 npsm(m x f)
33 Tank air regulator
Fig. 1
E
4
H
C
03186B
4ą 308369
Pressure Relief Procedure
Installation
WARNING
FIRE AND EXPLOSION HAZARD
Always maintain a minimum of 1 in. clearance between rotating agitator parts and container to prevent sparks from contact.
Grounding
Check your local code for detailed grounding instructions for your area and type of equipment. Be sure to ground the pressure tank by connecting one end of a 12 awg (1.5 mm
@
) minimum ground wire to the pressure tank and the other end of the wire to a true earth ground.
Recommended Hose Sizes
(general purpose)
WARNING
PRESSURIZED EQUIPMENT HAZARD
The pressure tanks remain pressurized until pressure is manually relieved. To reduce the risk of serious injury from pressurized fluid or accidental spray from the gun, always follow this procedure to relieve pressure in the tank at the following times:
D
Before you check or service any part of the spray system
D
Before you loosen or remove the pressure tank cover or fill port
D
Whenever you stop spraying
1.
Shut off the air supply to the tank by closing the air inlet valve (17). Refer to Fig. 2.
2.
Open the drain cock fitting (7) by turning it counterclockwise.
3.
Wait until there is no air escaping through the drain cock fitting before removing the cover or opening the fill port.
4.
Leave the drain cock fitting (7) open until you have reinstalled the cover or fill port.
Fluid
For runs of: Use:
0 to 35 ft (0 to 11 m) 3/8” ID
35 to 100 ft (11 to 30 m) 1/2” ID
100 to 200 ft
(30 to 61 m) 3/4” ID
Air
For runs of: Use:
0 to 50 ft (0 to 15 m) 5/16” ID
50 to 100 ft (15 to 30 m) 3/8” ID
100 ft+ (30 m+) 1/2” ID
Installing a Heavy Duty Agitator
To install a heavy duty air operated agitator, see manual 308371. This agitator is recommended for fluid viscosities over 800 centipoise (cp).
Connecting Hoses
Refer to Fig. 1, page 4. Install an air regulator and filter (G) upstream from the air inlet ball valve (17) to remove dirt and moisture from the compressed air supply (B). See Accessories on page 16. Connect an air supply hose (A) between the air inlet ball valve (17) and an air outlet of the air regulator and filter (G).
Connect the atomizing air hose (D) to the air spray gun
(F) from an air outlet of air regulator and filter (G) or from the gun air regulator kit (see Accessories on page 16).
Connect a fluid hose (E) between the 3/8 npt(m) fluid outlet ball valve (18) and the fluid inlet of air spray gun (F).
17
Fig. 2
7
03187B
308369 5
Operation
WARNING
PRESSURIZED EQUIPMENT HAZARD
This is a pressurized tank. Always follow the Pressure Relief Procedure on page
5 before opening the tank cover or fill port. This reduces the risk of serious injury, including splashing in the eyes or on the skin, or injury from moving parts. These injuries can result if the tank pressure is not fully relieved.
Operating the Pressure Tank
1.
Close the tank air regulator (33) by turning the knob counterclockwise and turn on the air supply.
See Fig. 2.
2.
Open the air inlet ball valve (17).
3.
Start and adjust the agitator (if it is used) as explained in the separate instruction manual
308371.
4.
Adjust the tank air regulator (33) to the approximate pressure desired.
Preparing the Fluid
Prepare the fluid according to the manufacturer’s instructions. Strain the fluid to remove large particles that could clog the spray gun or the siphon tube.
Filling the Tank
1.
Before filling the tank, follow the Pressure Relief
Procedure on page 5.
2.
Place fluid into the tank by one of the following methods: a.
Remove the cover and place a 5-gallon pail of fluid in the 5-gallon tank (see Dimensions, page 17).
b.
Remove the cover and place a 5-gallon antistatic polyethylene liner in the 5-gallon tank. Pour the fluid into the antistatic polyethylene liner (see Accessories, page
16).
3.
Fill the tank through the fill port in the cover, or remove the cover and pour fluid directly into the tank. Do not exceed the suggested capacity (5, 10 or 15 gallons) of your tank.
NOTE: If a 5-gallon pail is used inside the tank, an adjustment is required to the agitator paddle position to avoid interference. See instruction manual 308371 for adjustment information.
4.
Replace the cover or the filler cap (20) and tighten the c–clamp handles securely.
5.
Open fluid outlet ball valve (18).
6.
Turn on the atomizing air to the air spray gun. Test spray a small area and adjust the pressure as necessary. Always use the lowest possible air pressure to obtain the desired results.
WARNING
PRESSURIZED EQUIPMENT HAZARD
Overpressurizing the tank or accessories could cause a part to rupture. To reduce the risk of serious injury, including splashing in the eyes or on the skin, and property damage, never exceed the maximum air and fluid working pressure of the lowest rated component in your system.
CAUTION
Do not operate the agitator at a high speed for a long period of time. Excessive agitator speed can cause foaming of fluid (making the fluid unusable), vibration, and increased wear on the parts. Always agitate the fluid only enough to maintain even mixing.
Safety Relief Valve
A safety relief valve (4) will automatically relieve the tank pressure when the air pressure exceeds 95 to
100 psi (0.5 to 0.6 MPa, 6.5 to 7 bar). Refer to Fig. 2 or the parts drawings.
Each week, check the working order of the safety relief valve. Only as a test, raise the air pressure to 95 to
105 psi (0.5 to 0.6 MPa, 6.5 to 7.1 bar). If the safety relief valve does not relieve the pressure, replace it immediately. Do not attempt to repair it. The safety relief valve will reset automatically when the pressure is relieved.
6ą 308369
Maintenance
Cleaning the Tank
1.
First follow the Pressure Relief Procedure on page 5.
2.
Follow the procedure below to force the fluid back through the hose and into the tank: a.
Loosen the spray gun air cap retaining ring about two turns.
b.
Hold a rag over the air cap and trigger the gun for a few seconds, until the fluid is forced back into the tank.
3.
Remove the tank cover.
4.
Empty the fluid from the tank and pour a suitable amount of solvent into it.
5.
Replace the tank cover and tighten the c–clamps.
6.
Close the drain cock fitting (7).
7.
Turn on the air supply.
8.
Hold a metal part of the gun against a grounded metal waste container and trigger the gun into the waste container until clean solvent comes from the gun.
9.
Remove the solvent from the system and wipe the inside of the tank and the rest of the equipment clean with a solvent-dampened rag.
See separate instruction manual 308371 for information on agitator maintenance.
CAUTION
Be sure that the solvent you use is compatible with the fluid being sprayed. Refer to the Technical Data section on page 19.
308369 7
Parts
Low-Pressure Stainless Steel Tanks
Model 236143, 5-gallon size
Model 236144, 10-gallon size
Model 236145, 15-gallon size
19
33
9
3
34
25
1
2
11
19
32
17
4
2
20
15
7
14
8
5
30
31
18
16
29
6
22
35
28
12
Tank Assemblies include tank (27), gasket (28), cover (29), and plug (36).
Part No.
Description
236087
236088
236089
TANK ASSY; 5-gallon size
TANK ASSY; 10-gallon size
TANK ASSY; 15-gallon size
27
36
03083A
8ą 308369
Parts
Low-Pressure Stainless Steel Tanks
Model 236143, 5-gallon size
Model 236144, 10-gallon size
Model 236145, 15-gallon size
Ref.
No.
Part No.
Description Qty.
1
2
3
4
5
110476 ADAPTER, union, straight swivel;
3/8 npt(m) to 1/4 npsm(f) 2
100840 ELBOW, street; 1/4-18 npt(m x f) 2
164724 HOSE, coupled; 400 wpr; 1/8-27 npt(m) 1
103347 VALVE, safety, 100 psi
(0.7 Mpa, 7 bar); 1/4-18 npt(m) 1
189016 MANIFOLD, air inlet; 3/8-18 npt;
1/4-18 npt
112306 PLUG, pipe; 3/8-18 npt; sst
101759 FITTING, drain cock
1
1
1
19
20
21
6
7
8
9
11
100030 BUSHING;
1/8-27 npt(f) x 1/4-18 npt(m)
112307 ELBOW, street, 90
_
;
1/8-27 npt(f) x 1/8-27 npt(m)
110475 TEE, street; zinc plated steel;
1/8-27 npt(f) x 1/8-27 npt(m)
12
171976 TUBE; 5-gallon size; sst
171975 TUBE; 10-gallon size; sst
171974 TUBE; 15-gallon size; sst
14 156849 NIPPLE, pipe; 3/8-18 npt
15 n
171988 GASKET; chlororene rubber
16 and cork
110756 ELBOW, street, 90
_
;
3/8 npt x 3/8 npt; sst
17 n
208390 VALVE, ball; 1/4-18 npt(m)
See 307068 for parts
18 n
237533 VALVE, ball; sst;
3/8-18 npsm(m x f),
1
1
1
1
1
See 307068 for parts 1
100139 PLUG, pipe, headless;1/8-27 npt 2
210575 CAP, filler
176373 LABEL, Warning (not shown)
1
1
1
1
1
1
1
Ref.
No.
Part No.
Description Qty.
22
25
188784 NUT, jam; 1-1/2-12-unf-2b; sst
151519 NIPPLE, reducing; 1/4-1/8 npt
236087 TANK; 5-gallon size; sst
Includes items 28, 29 & 36
27 236088 TANK; 10-gallon size; sst
Includes items 28, 29 & 36
236089 TANK; 15-gallon size; sst
Includes items 28, 29 & 36
28 n
117571 GASKET; Santoprene r
29 COVER, tank; sst
30 188880 PLUG, lid; sst
31 n
103414 O-RING, packing; polyamide
32 104813 PLUG, pipe; 3/8-18 npt
33 n
111501 REGULATOR; 0 to 15 psi
(0 to 0.1 MPa, 0 to 1 bar)
34 n
110444 GAUGE, pressure, air; 0 to 15 psi
(0 to 0.1 MPa, 0 to 1 bar)
35 n{
110143 T-HANDLE
36
38
}
PLUG, bottom; 3/4-14 npt
LINER, antistatic polyethylene;
(not shown)
1
1
1
1
1
1
1
1
1
1
1
1
6
1
1 n
Keep these spare parts on hand to reduce down time.
{
A C–clamp replacement Kit is available. It includes the T-handle, C–clamp, pin, and cotter pin.
Order 111381.
}
To purchase a box of antistatic polyethylene liners, see
Accessories
on page 16.
NOTE: The 307 numbers in the descriptions refer to
separate instruction manuals.
308369 9
Low-Pressure Stainless Steel Tanks W/Agitator
Model 236146, 5-gallon size
Model 236147, 10-gallon size
Model 236148, 15-gallon size
Parts
17
2
34
19
1
37
33
9
29
3
39
7
11
14
8
5
32
4
2
Tank Assemblies include tank (27), gasket (28), cover (29), and plug (36).
Part No.
Description
236087
236088
236089
TANK ASSY; 5-gallon size
TANK ASSY; 10-gallon size
TANK ASSY; 15-gallon size
35
Agitator Assemblies
Part No.
Description
236661
236662
236663
AGITATOR ASSY; 5-gallon size
AGITATOR ASSY; 10-gallon size
AGITATOR ASSY; 15-gallon size
10ą 308369
28
6
Agitator bearing not included with
5-gallon tank assy.
22
20
15
18
16
12
See Manual 308371 for agitator parts.
36
03085C
27
Parts
Low-Pressure Stainless Steel Tanks W/Agitator
Model 236146, 5-gallon size
Model 236147, 10-gallon size
Model 236148, 15-gallon size
Ref.
No.
Part No.
Description Qty.
1
2
3
4
5
110476 ADAPTER, union, straight swivel;
3/8 npt(m) to 1/4 npsm(f) 2
100840 ELBOW, street; 1/4-18 npt(m x f) 2
164724 HOSE, coupled; 400 wpr; 1/8-27 npt(m) 1
103347 VALVE, safety, 100 psi
(0.7 MPa, 7 bar); 1/4-18 npt(m) 1
189016 MANIFOLD, air inlet; 3/8-18 npt;
1/4-18 npt
112306 PLUG, pipe; 3/8-18 npt; sst
101759 FITTING, drain cock
1
1
1
19
20
21
6
7
8
9
11
100030 BUSHING;
1/8-27 npt(f) x 1/4-18 npt(m)
112307 ELBOW, street, 90
_
;
1/8-27 npt(f) x 1/8-27 npt(m)
110475 TEE, street; zinc plated steel;
1/8-27 npt(f) x 1/8-27 npt(m)
12
171976 TUBE; 5 gallon size; sst
171975 TUBE; 10 gallon size; sst
171974 TUBE; 15 gallon size; sst
14 156849 NIPPLE, pipe; 3/8-18 npt
15 n
171988 GASKET; chlororene rubber
16 and cork
110756 ELBOW, street, 90
_
;
3/8 npt x 3/8 npt; sst
17 n
208390 VALVE, ball; 1/4-18 npt(m)
See 307068 for parts
18 n
237533 VALVE, ball; sst;
3/8-18 npsm(m x f),
See 307068 for parts
151519 NIPPLE, reducing; 1/4-1/8 npt
210575 CAP, filler
176373 LABEL, Warning (not shown)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Ref.
No.
Part No.
Description Qty.
22
236661 AGITATOR, pressure, tank;
5 gallon size; sst
236662 AGITATOR, pressure, tank;
10 gallon size; sst
236663 AGITATOR, pressure, tank;
15 gallon size; sst
236087 TANK; 5 gallon size; sst
Includes items 28, 29 & 36
27 236088 TANK; 10 gallon size; sst
Includes items 28, 29 & 36
236089 TANK; 15 gallon size; sst
Includes items 28, 29 & 36
28 n
117571 GASKET; Santoprene r
29 COVER, tank; sst
32 104813 PLUG, pipe; 3/8-18 npt
33 n
111501 REGULATOR; 0 to 15 psi
(0 to 0.1 MPa, 0 to 1 bar)
34 n
110444 GAUGE, pressure, air; 0-15 psi
(0 to 0.1 MPa, 0 to 1 bar)
35 n{
110143 T-HANDLE
36 PLUG, bottom; 3/4-14 npt
37
38
}
100139 PLUG, pipe; 1/8 npt
LINER, antistatic polyethylene;
(not shown)
1
1
1
1
1
1
1
1
1
1
1
1
1
6
1
39 222011 CLAMP, grounding n
Keep these spare parts on hand to reduce down time.
{
A C–clamp replacement Kit is available. It includes the T–handle, C–clamp, pin, and cotter pin.
Order 111381.
}
To purchase a box of antistatic polyethylene liners, see
Accessories
on page 16.
1
NOTE: The 307 numbers in the descriptions refer to
separate instruction manuals.
308369 11
Parts
High-Pressure Stainless Steel Tanks
Model 236149, 5-gallon size, includes items 1–38
Model 236150, 10-gallon size, includes items 1–38
Model 243589, 10-gallon size, includes items 2–16, 19–22, 27–32, 36–38
Model 236151, 15-gallon size, includes items 1–38
1
34
35
25
2
17
33
9
3
19
32
4
2
20
7
11
8
5
14
30
31
15
18
16
29
36
6
22
28
12
Tank Assemblies include tank (27), gasket (28), cover (29), and plug (37).
Part No.
Description
236087
236088
236089
TANK ASSY; 5-gallon size
TANK ASSY; 10-gallon size
TANK ASSY; 15-gallon size
12ą 308369
37
27
03087A
Parts
High-Pressure Stainless Steel Tanks
Model 236149, 5-gallon size, includes items 1–38
Model 236150, 10-gallon size, includes items 1–38
Model 243589, 10-gallon size, includes items 2–16, 19–22, 27–32, 36–38
Model 236151, 15-gallon size, includes items 1–38
Ref.
No.
Part No.
Description Qty.
Ref.
No.
Part No.
Description
1* 100361 PLUG, pipe, headless;
2
1/2-14 npt(f) 1
100840 ELBOW, street; 1/4-18 npt(m x f) 2
3 164724 HOSE, coupled; 400 wpr; 1/8-27 npt(m) 1
4
5
103347 VALVE, safety, 100 psi
(0.7 MPa, 7 bar); 1/4-18 npt(m) 1
189016 MANIFOLD, air inlet; 3/8-18 npt;
1
1
1
6
7
8
9
1/4-18 npt
112306 PLUG, pipe; 3/8-18 npt; sst
101759 FITTING, drain cock
100030 BUSHING;
1/8-27 npt(f) x 1/4-18 npt(m)
112538 ELBOW, street, 90
_
;
1/8-27 npt(f) x 1/4-18 npt(m)
110475 TEE, street; zinc plated steel; 11
12
1/8-27 npt(f) x 1/8-27 npt(m)
171976 TUBE; 5-gallon size; sst
171975 TUBE; 10-gallon size; sst
171974 TUBE; 15-gallon size; sst
14 156849 NIPPLE, pipe; 3/8-18 npt
15 n
171988 GASKET; chlororene rubber
16 and cork
110756 ELBOW, street, 90
_
;
3/8 npt x 3/8 npt; sst
17* n
208390 VALVE, ball; 1/4-18 npt(m)
See 307068 for parts
18* n
237533 VALVE, ball; sst;
3/8-18 npsm(m x f),
1
1
1
1
1
1
1
1
1
1
19
20
21
22
See 307068 for parts 1
100139 PLUG, pipe, headless;1/8-27 nptf 1
210575 CAP, filler
176373 LABEL, Warning (not shown)
188784 NUT, jam; 1-1/2-12-unf-2b; sst
25* 155665 UNION, adapter;
3/8 npt x 3/8 npsm 1
1
1
1
Qty.
27
236087 TANK; 5-gallon size; sst
Includes items 28, 29 & 37
236088 TANK; 10-gallon size; sst
Includes items 28, 29 & 37
236089 TANK; 15-gallon size; sst
Includes items 28, 29 & 37
28 n
117571 GASKET; Santoprene r
29 COVER, tank; sst
30 188880 PLUG, lid; sst
31 n
103414 O-RING, packing; polyamide
32 104813 PLUG, pipe; 3/8-18 npt
33* n
171937 REGULATOR, air; 2 to 125 psi
(0.01 to 0.8 MPa, 0.1 to 9 bar)
34* n
160430 GAUGE, pressure, air; 0 to100 psi
(0 to 0.7 MPa, 0 to 7 bar)
35* 159239 NIPPLE, pipe, reducing;
1/2-14 npt x 3/8-18 npt
36 n{
110143 T-HANDLE
37
38
}
PLUG, bottom; 3/4-14 npt
LINER, antistatic polyethylene;
(not shown)
n
Keep these spare parts on hand to reduce down time.
{
A C–clamp replacement Kit is available. It includes the T–handle, C–clamp, pin, and cotter pin.
Order 111381.
}
To purchase a box of antistatic polyethylene liners, see
Accessories
on page 16.
* Not included with Model 243589.
NOTE: The 307 numbers in the descriptions refer to
separate instruction manuals.
1
1
1
1
1
1
1
1
1
1
1
6
1
1
308369 13
High-Pressure Stainless Steel Tanks W/Agitator
Model 236152, 5-gallon size
Model 236153, 10-gallon size
Model 236154, 15-gallon size
Parts
34
1
33
35 25 2 17
5
9
3
14
7
11
8
32
4
2
39
6
Agitator bearing not included with
5-gallon tank assy.
Tank Assemblies include tank (27), gasket (28), cover (29) and plug (37).
Part No.
Description
236087
236088
236089
TANK ASSY; 5-gallon size
TANK ASSY; 10-gallon size
TANK ASSY; 15-gallon size
36
Agitator Assemblies
Part No.
Description
236661
236662
236663
AGITATOR ASSY; 5-gallon size
AGITATOR ASSY; 10-gallon size
AGITATOR ASSY; 15-gallon size
14ą 308369
22
20
15
18
16
29
28
12
See Manual 308371 for agitator parts.
27
03089C
37
Parts
High-Pressure Stainless Steel Tanks W/Agitator
Model 236152, 5-gallon size
Model 236153, 10-gallon size
Model 236154, 15-gallon size
Ref.
No.
Part No.
Description Qty.
Ref.
No.
Part No.
Description
1
2
3
4
5
6
7
8
9
100361 PLUG, pipe, hdless;1/2-14 npt(f) 1
100840 ELBOW, street; 1/4-18 npt(m x f) 2
164724 HOSE, coupled; 400 wpr; 1/8-27 npt(m) 1
103347 VALVE, safety, 100 psi
(0.7 Mpa, 7 bar);1/4-18 npt(m)
189016 MANIFOLD, air inlet; 3/8-18 npt;
1/4-18 npt
1
112306
101759
PLUG, pipe; 3/8-18 npt; sst
FITTING, drain cock
100030 BUSHING;
1/8-27 npt(f) x 1/4-18 npt(m)
112538 ELBOW, street, 90
_
;
1/8-27 npt(f) x 1/4-18 npt(m)
1
1
1
1
1
11 110475 TEE, street; zinc plated steel;
1/8-27 npt(f) x 1/8-27 npt(m)
171976 TUBE; 5-gallon size; sst
171975 TUBE; 10-gallon size; sst 12
171974 TUBE; 15-gallon size; sst
14 156849 NIPPLE, pipe; 3/8-18 npt
15 n
171988 GASKET; chlororene rubber
16 and cork
110756 ELBOW, street, 90
_
;
3/8 npt x 3/8 npt; sst
17 n
208390 VALVE, ball; 1/4-18 npt(m)
See 307068 for parts
18 n
237533 VALVE, ball; sst;
3/8 npsm(m) x 3/8 npt(m),
1
1
1
1
1
1
1
1
19
20
21
22
176373
210575
155665
See 307628 for parts
LABEL, Warning (not shown)
CAP, filler
UNION, adapter;
3/8 npt x 3/8 npsm
236661 AGITATOR, pressure, tank;
5-gallon size; sst
236662 AGITATOR, pressure, tank;
10-gallon size; sst
236663 AGITATOR, pressure, tank;
15-gallon size; sst
1
1
1
1
1
1
1
Qty.
27
236087 TANK; 5-gallon size; sst
Includes items 28, 29 & 37
236088 TANK; 10-gallon size; sst
Includes items 28, 29 & 37
236089 TANK; 15-gallon size; sst
Includes items 28, 29 & 37
28 n
117571 GASKET; Santoprene r
29 COVER, tank; sst
32 104813 PLUG, pipe; 3/8-18 npt
33 n
171937 REGULATOR. air; 2 to 125 psi
(0.01 to 0.8 MPa, 0.1 to 9 bar)
34 n
160430 GAUGE, pressure, air; 0 to100 psi
(0 to 0.7 MPa, 0 to 7 bar)
35 159239 NIPPLE, pipe, reducing;
1/2-14 npt x 3/8-18 npt
36 n{
110143 T-HANDLE
37
38
}
PLUG, bottom
LINER, antistatic polyethylene;
(not shown)
1
1
1
1
1
1
1
1
1
6
1
1
39 222011 CLAMP, grounding 1 n
Keep these spare parts on hand to reduce down time.
{
A C–clamp replacement Kit is available. It includes the T–handle, C–clamp, pin, and cotter pin.
Order 111381.
}
To purchase a box of antistatic polyethylene liners, see
Accessories
on page 16.
NOTE: The 307 numbers in the descriptions refer to
separate instruction manuals.
308369 15
Accessories
Strainer 202271
300 psi (2.1 MPa, 21 bar) Maximum Working Pressure
Install at the tank air inlet to remove dirt and moisture from the air supply, or at the tank fluid outlet to remove particles from the paint which could clog the spray gun nozzle.
Gun Air Regulator Kit
100 psi (0.7 MPa, 7 bar) Working Pressure
To supply atomizing air to a spray gun from the pressure pot.
235042
Buna–N Air Supply Hose
200 psi (1.4 MPa, 14 bar) Maximum Working Pressure
5/16“ ID; cpld 1/4 npsm(f) swivel
210866 15 ft (4.6 m) long
210867 25 ft (7.6 m) long
Low-Pressure Regulator Conversion Kit 235041
15 psi (0.1 MPa, 1 bar) Working Pressure. 0 to 15 psi
(0 to 0.1 MPa, 0 to 1 bar) regulated pressure range
To convert to a low-pressure regulator assembly.
Nylon Fluid Supply Hose
300 psi (2.1 MPa, 21 bar) Maximum Working Pressure
3/8” ID; cpld 3/8 npsm(fbe) swivel; neoprene cover
205160 15 ft (4.6 m) long
205142 25 ft (7.6 m) long
205143 50 ft (15.2 m) long
Bottom Outlet Kit
For bottom outlet fluid feeding.
236677
High-Pressure Regulator Conversion Kit 236680
100 psi (0.7 MPa, 7 bar) Working Pressure. 0 to 100 psi (0 to 0.7 MPa, 0 to 7 bar) regulated pressure range
To convert to a high-pressure regulator assembly.
Air Regulator and Filter 202660
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
For air regulation and filtration.
Standard Agitator Air Gearmotor Repair Kit 236675
For repair of worn air gear motors.
Heavy Duty Agitator
To convert from a standard agitator assembly to a heavy duty agitator assembly. Recommended for fluid viscosities over 800 cp.
236661 5-gallon tank size
236662 10-gallon tank size
236663 15-gallon tank size
C–clamp Replacement Kit 111381
To replace the pressure tank C–clamp assembly. The kit includes the T–handle, C–clamp, pin, and cotter pin.
Antistatic Polyethylene Tank Liners
Liners fit inside the tank. For ease of cleanup and maintenance.
15D059 5-gallon tank size (Quantity of 20)
15D060 10-gallon tank size (Quantity of 20)
15D061 15-gallon tank size (Quantity of 8)
Stainless Steel Agitator Paddle 186517
Material of 304 stainless steel welded construction.
Replaces plastic agitator paddle 236098.
PTFE Coated Gasket 117574
Optional replacement for standard 117571 gasket.
16ą 308369
Notes
308369 17
Dimensions
Size
5 Gallon
10 Gallon
15 Gallon
Model
236143
236149
236146
236152
236144
236150
236147
236153
236145
236151
236148
236154
03282A overall height
(see chart)
19” (483 mm) tank shown without cover
Dim. Y
(see chart)
5-gallon pail
12.6” (320.5 mm)
14” (356 mm)
03190
Overall
Height
30.5“ (775 mm)
30.5“ (775 mm)
30.5“ (775 mm)
30.5“ (775 mm)
33.87“ (860 mm)
33.87“ (860 mm)
33.87“ (860 mm)
33.87“ (860 mm)
44.57“ (1132 mm)
44.57“ (1132 mm)
44.57“ (1132 mm)
44.57“ (1132 mm)
Net Weight
65 lb (30 kg)
65 lb (30 kg)
86 lb (39 kg)
74 lb (34 kg)
76 lb (35 kg)
76 lb (35 kg)
97 lb (44 kg)
85 lb (39 kg)
92 lb (42 kg)
92 lb (42 kg)
113 lb (51 kg)
101 lb (46 kg)
Paint
Bucket
Dim. Y
13.19”
(335 mm)
18.19”
(462 mm)
28.94”
(735 mm)
18ą 308369
Technical Data
Actual tank capacities
5-gallon size: 8.8 U.S. gal (33 liter)
10-gallon size: 12.6 U.S. gal (48 liter)
15-gal size: 19.3 U.S. gal (72 liter)
Maximum working pressure
Low pressure regulated tank: 15 psi
(0.1 MPa, 1 bar)
High pressure regulated tank: 100 psi
(0.7 Mpa, 7 bar)
Relief valve setting:
100 psi (0.7 MPa, 7 bar)
Standard agitator air consumption
(continuous duty):
15 cfm (0.42 m
#
/min) at 60 rpm and 80 psi
(0.5 MPa, 5 bar) air supply pressure
Air inlet size:
1/4–18 npt(m)
Fluid outlet size:
3/8–18 npsm(m)
Bottom outlet size:
3/4–14 npt(f)
Weight:
See chart on page 18.
Wetted parts
Models without agitator: 304 & 316 stainless steel,
Santoprene r
, polyamide, and PET
Models with agitator: 304 & 316 stainless steel,
Santoprene r
, polyamide, PET, PTFE, and bronze
* Sound power level at
100 psi (0.7 MPa, 7 bar):
92 dBa
* Sound pressure level at
100 psi (0.7 MPa, 7 bar):
82 dBa
*
Sound power level and sound pressure level measured per ISO 9614–2.
Santoprene
r
is a registered trademark of the
Advanced Elastomer Systems, L.P.
308369 19
Graco Standard Warranty
Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,
Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER
, contact your Graco distributor or call to identify the distributor closest to you:
Phone: 612–623–6921 or Toll Free: 1–800–328–0211 Fax: 612–378–3505
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 308369
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC.
P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
Copyright 1994, Graco Inc. is registered to ISO 9001 www.graco.com
Revised 05/2011
20ą 308369
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project