Graco 3A1309A - RoadPak Gun Stencil Kit Instructions

Instructions

Gun Stencil Kit for RoadLazer

™

RoadPak

™

Line Striping System

Model 24G778, Series A

3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure

Important Safety Instructions

For complete warnings and safety instructions see RoadLazer

™

RoadPak

™

Line Striper System manual. Save these instructions.

3A1309A

ENG

Pressure Relief Procedure

The system pressure must be manually relieved to prevent the system from starting or spraying accidentally.

Fluid under high pressure can be injected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or moving parts, follow the Pressure Relief Procedure in manual

3A1214 whenever you:

• are instructed to relieve the pressure

• stop spraying

• check or service any of the system equipment

• install or clean the spray tip ti16518a

RoadPak Gun Stencil Kit Installation

1.

Perform Pressure Relief Procedure before installing (see manual 3A1214).

1

3

4

2

5 ti16519a

Parts List

Ref.

Part

11

12

13

14

15

16

7

8

5

6

3

4

1

2

Description

248157 FLEX GUN

249080 HOSE, coupled 1/4 x 50 ft

166969 GASKET

180137 NUT, gun

223718 TUBE, extension, 15.83 in.

180136 ADAPTER, tip

243161 GUARD, RAC 5

286425 SWITCH TIP, size 425

101566 NUT, lock

108851 WASHER, plain

16G776 BRACKET, hose wrap

516595 BOLT, hex, 3/4 in.

196177 NIPPLE, reducer

124490 FITTING, tee

6

8

Qty.

4

8

8

8

1

1

1

1

1

1

1

1

1

1

7

2

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Original instructions. This manual contains English. MM 3A1309

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441

Copyright 2010, Graco Inc. is registered to ISO 9001 www.graco.com

Revision A - 04/2011

3A1309A