Microsoft GP System User's Guide
Quảng cáo
Quảng cáo
Microsoft Dynamics
®
GP
System User’s Guide
Copyright
Limitation of liability
Intellectual property
Trademarks
Warranty disclaimer
License agreement
Copyright © 2011 Microsoft. All rights reserved.
This document is provided “as-is”. Information and views expressed in this document, including
URL and other Internet Web site references, may change without notice. You bear the risk of using it.
Some examples depicted herein are provided for illustration only and are fictitious. No real association or connection is intended or should be inferred.
This document does not provide you with any legal rights to any intellectual property in any
Microsoft product.
You may copy and use this document for your internal, reference purposes.
Microsoft, Bing, Excel, Lync, MapPoint, Microsoft Dynamics, Outlook, SharePoint, and SQL Server are trademarks of the Microsoft group of companies. FairCom and c-tree Plus are trademarks of
FairCom Corporation and are registered in the United States and other countries.
All other trademarks are property of their respective owners.
Microsoft Corporation disclaims any warranty regarding the sample code contained in this documentation, including the warranties of merchantability and fitness for a particular purpose.
Use of this product is covered by a license agreement provided with the software product. If you have any questions, please call the Microsoft Dynamics GP Customer Assistance Department at
800-456-0025 (in the U.S. or Canada) or +1-701-281-6500.
Publication date
April 2011
Contents
Introduction
.................................................................................................................................................
2
Part 1: The basics
.................................................................................................................................
6
Chapter 1: Microsoft Dynamics GP documentation
............................................
7
Chapter 2: Using Microsoft Dynamics GP
...................................................................
11
Chapter 3: Navigation
...................................................................................................................
15
Chapter 4: Lists
...................................................................................................................................
21
Chapter 5: Business Analyzer
.................................................................................................
27
S Y S T E M U S E R ’ S G U I D E i
C O N T E N T S
Chapter 6: Home pages
................................................................................................................
35
Chapter 7: Microsoft Dynamics GP windows
.........................................................
45
Chapter 8: User preferences
...................................................................................................
55
Chapter 9: Shortcut navigation
............................................................................................
61
ii S Y S T E M U S E R ’ S G U I D E
C O N T E N T S
Chapter 10: Keyboard shortcuts
..........................................................................................
69
Part 2: Microsoft software integration
...............................................................
74
Chapter 11: Workflow
....................................................................................................................
75
Chapter 12: Letter Writing Assistant
...............................................................................
79
Chapter 13: MapPoint integration
.....................................................................................
83
Chapter 14: Unified Communications
............................................................................
85
Part 3: Working with Microsoft Dynamics GP
.........................................
92
Chapter 15: Cards
..............................................................................................................................
93
Chapter 16: System and company reports
.................................................................
97
S Y S T E M U S E R ’ S G U I D E iii
C O N T E N T S
Chapter 17: Transactions and batches
......................................................................
101
..........................................................................................................................101
Chapter 18: Reminders and tasks
...................................................................................
107
Chapter 19: Macros
........................................................................................................................
115
Chapter 20: Inquiries and audit trails
...........................................................................
119
Chapter 21: Posting Microsoft Dynamics GP
.......................................................
127
Part 4: Reporting in Microsoft Dynamics GP
.........................................
136
Chapter 22: Reporting in Microsoft Dynamics GP
..........................................
137
iv S Y S T E M U S E R ’ S G U I D E
C O N T E N T S
Chapter 23: Report Writer reports
..................................................................................
141
Chapter 24: SmartList
................................................................................................................
149
Chapter 25: Word template maintenance
................................................................
161
Chapter 26: SQL Server Reporting Services reports
.....................................
171
Chapter 27: Optional ways to create or modify reports
............................
173
S Y S T E M U S E R ’ S G U I D E v
C O N T E N T S
Index
...............................................................................................................................................................
177
vi S Y S T E M U S E R ’ S G U I D E
Introduction
Microsoft Dynamics
®
GP is an integrated, customizable financial management system. Modules are available to maintain accounts, post transactions, and print financial statements, as well as to manage data and transactions for subsidiary ledgers. More specialized functions also are available including manufacturing, human resources and payroll, project accounting, and management of service call centers and depots.
This introduction is divided into the following sections:
•
•
•
Resources available from the Help menu
•
Send us your documentation comments
What’s in this manual
This manual is designed to provide you with a framework for understanding and working with the entire Microsoft Dynamics GP system.
Some features described in the documentation are optional and can be purchased through your Microsoft Dynamics GP partner.
To view information about the release of Microsoft Dynamics GP that you’re using and which modules or features you are registered to use, choose Help >> About
Microsoft Dynamics GP.
The manual is divided into the following parts:
•
Part 1, The basics , gives detailed information on the Microsoft Dynamics GP
interface.
•
Part 2, Microsoft software integration , provides information on Microsoft
software that integrates with Microsoft Dynamics GP.
•
Part 3, Working with Microsoft Dynamics GP
, provides information about processing data and printing reports.
•
Part 4, Reporting in Microsoft Dynamics GP
, provides additional information about printing reports and about the reporting options that are available with
Microsoft Dynamics GP.
Symbols and conventions
For definitions of unfamiliar terms, see the glossary in the manual or refer to the glossary in Help.
Symbol Description
The light bulb symbol indicates helpful tips, shortcuts and suggestions.
The warning symbol indicates situations you should be especially aware of when completing tasks.
2 S Y S T E M U S E R ’ S G U I D E
I N T R O D U C T I O N
This manual uses the following conventions to refer to sections, navigation and other information.
Convention
Creating a batch
File >> Print or File >
TAB
or
ENTER
Description
Italicized type indicates the name of a section or procedure.
The (>>) or (>) symbol indicates a sequence of actions, such as selecting items from a menu or toolbar, or pressing buttons in a window. This example directs you to go to the File menu and choose
Print.
All capital letters indicate a key or a key sequence.
Resources available from the Help menu
The Microsoft Dynamics GP Help menu gives you access to user assistance resources on your computer, as well as on the Web.
Contents
Opens the Help file for the active Microsoft Dynamics GP component, and displays the main “contents” topic. To browse a more detailed table of contents, click the
Contents tab above the Help navigation pane. Items in the contents topic and tab are arranged by module. If the contents for the active component includes an
“Additional Help files” topic, click the links to view separate Help files that describe additional components.
To find information in Help by using the index or full-text search, click the appropriate tab above the navigation pane, and type the keyword to find.
To save the link to a topic in the Help, select a topic and then select the Favorites tab.
Click Add.
Index
Opens the Help file for the active Microsoft Dynamics GP component, with the
Index tab active. To find information about a window that’s not currently displayed, type the name of the window, and click Display.
About this window
Displays overview information about the current window. To view related topics and descriptions of the fields, buttons, and menus for the window, choose the appropriate link in the topic. You also can press F1 to display Help about the current window.
Lookup
Opens a lookup window, if a window that you are viewing has a lookup window.
For example, if the Checkbook Maintenance window is open, you can choose this item to open the Checkbooks lookup window.
Show Required Fields
Highlights fields that are required to have entries. Required fields must contain information before you can save the record and close the window. You can change the font color and style used to highlight required fields. On the Microsoft
Dynamics GP menu, choose User Preferences, and then choose Display.
S Y S T E M U S E R ’ S G U I D E 3
I N T R O D U C T I O N
Printable Manuals
Displays a list of manuals in Adobe Acrobat.pdf format, which you can print or view.
What’s New
Provides information about enhancements that were added to Microsoft Dynamics
GP since the last major release.
Microsoft Dynamics GP Online
Opens a Web page that provides links to a variety of Web-based user assistance resources. Access to some items requires registration for a paid support plan.
Customer Feedback Options
Provides information about how you can join the Customer Experience
Improvement Program to improve the quality, reliability, and performance of
Microsoft
®
software and services.
Send us your documentation comments
We welcome comments regarding the usefulness of the Microsoft Dynamics GP documentation. If you have specific suggestions or find any errors in this manual, send your comments by e-mail to the following address: [email protected]
.
To send comments about specific topics from within Help, click the Documentation
Feedback link, which is located at the bottom of each Help topic.
Note: By offering any suggestions to Microsoft, you give Microsoft full permission to use them freely.
4 S Y S T E M U S E R ’ S G U I D E
Part 1: The basics
This part of the documentation explains how to use Microsoft Dynamics GP documentation resources, the basic activities and features in Microsoft Dynamics
GP, and how to customize the interface to your preferences.
The following information is discussed:
•
Chapter 1, “Microsoft Dynamics GP documentation,” provides an overview of
documentation for Microsoft Dynamics GP.
•
Chapter 2, “Using Microsoft Dynamics GP,”
provides instructions for performing basic tasks in Microsoft Dynamics GP, such as starting and quitting
Microsoft Dynamics GP, and using menus, toolbars, and shortcut keys.
•
Chapter 3, “Navigation,” describes how to use the Microsoft Dynamics GP
navigation pane to access list windows and shortcuts.
•
Chapter 4, “Lists,” describes how to use the Microsoft Dynamics GP lists to
perform actions against records.
•
Chapter 5, “Business Analyzer,”
describes how to use the Business Analyzer from primary lists and list views.
•
describes how to set up a home page to display information that is important to your job.
•
Chapter 7, “Microsoft Dynamics GP windows,”
contains information about the common features and functions of Microsoft Dynamics GP windows.
•
Chapter 8, “User preferences,”
explains how to customize the Microsoft
Dynamics GP interface according to your preferences.
•
Chapter 9, “Shortcut navigation,” describes how to use Microsoft Dynamics GP
shortcuts to quickly access windows, applications, and other resources you frequently use.
•
Chapter 10, “Keyboard shortcuts,”
describes how use keyboard shortcuts in
Microsoft Dynamics GP.
6 S Y S T E M U S E R ’ S G U I D E
Chapter 1: Microsoft Dynamics GP documentation
Microsoft Dynamics GP documentation provides a convenient way for you to find a variety of useful information, such as steps to help you complete an accounting procedure, details about an individual window, and solutions to resolving an error message.
If you have comments or questions about Microsoft Dynamics GP documentation, send an e-mail to [email protected].
This information is divided into the following sections:
•
•
•
•
•
Copying sections of text to modify
•
System documentation
The System User’s Guide contains information to help you customize Microsoft
Dynamics GP for the way you work. Troubleshooting information also is included.
Use the following resources to install and set up Microsoft Dynamics GP:
Installation Instructions manual
Contains directions for installing Microsoft
Dynamics GP, creating your account framework, and creating your first company.
System Setup instructions
Contains detailed instructions for setting up your
Microsoft Dynamics GP companies, taxes, security settings, and user records
(Help >> Contents >> select Setting Up the System).
System Administrator’s Guide
Contains directions on customizing, maintaining, and monitoring the Microsoft Dynamics GP system
(Help >> Contents >> select System Administration).
For more information about using additional Microsoft Dynamics GP modules, refer to the specific module’s documentation.
Printable manuals
If installed, you can view all of the Microsoft Dynamics GP manuals in Adobe
Acrobat Portable Document Format (PDF). To do so, on your start menu select All
Programs >> Microsoft Dynamics >> GP >> Documentation >> Manuals.
To view and print manuals, you must have Adobe Reader software installed on your computer. Adobe Reader is available for free download from the Adobe
Systems Web site, www.adobe.com
.
You can print sections of manuals that pertain to your work or print copies of entire manuals. To print, choose File >> Print and enter the beginning and ending pages to print, or mark the All option to print the whole manual.
S Y S T E M U S E R ’ S G U I D E 7
All manuals also are available on the installation media. You can install them on a server or client computer for easy access.
Using printable manuals
Acrobat Reader contains several ways for you to navigate through a manual. You can use links or bookmarks, or search for specific information.
Using links
Links appear as green, underlined text for Microsoft Dynamics GP documentation. When you move the pointer over a link, the link pointer—shaped like a pointing finger—appears. Click a link to move to that section or page.
When you click a link, the page you jump to will be shown in the view you currently have selected. For example, if you have the Fit Width view selected from the View menu, when you click a link, the new page will be displayed in Fit Width view.
Using bookmarks
You also can use bookmarks to quickly move through a document by selecting a specific part, chapter or section. If you don’t have bookmarks showing, choose Window >> Show Bookmarks.
Finding specific information
Use Acrobat’s built-in Find feature to locate specific text.
To find specific information:
1.
In Adobe Reader, choose Edit >> Find.
2.
Type the text you want to search for.
3.
Choose Find. To search for the next instance, press
CTRL
+
G
.
Copying sections of text to modify
You can’t make changes to the manual files. However, you can copy text and paste it into a word processing document; then make changes and print it. By doing so, you can quickly create your own checklists and routines that are tailored for your business.
To copy sections of text to modify:
1.
From the Adobe Reader toolbar, choose the Text Select tool button.
2.
Select the text to copy using one of the following methods:
• Highlight the text to copy with your mouse.
• Choose Microsoft Dynamics GP menu >> Edit >> Select All to select all the text in a document.
3.
Choose Microsoft Dynamics GP menu >> Edit >> Copy.
Using help
To access help, choose Help >> About This Window or press
F
1. A window will appear with a list of help topics related to the Microsoft Dynamics GP window
8 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 M I C R O S O F T D Y N A M I C S G P D O C U M E N T A T I O N you’re working in. Use the Feedback button, located in each help window, to send feedback on a specific help topic.
Three basic types of documentation are available in each Microsoft Dynamics GP
Help window: Overview, Fields, and Buttons. Some windows also include menu information. Each of these types appears on a link within the main Help window.
You can click on a link to display overview, field, button or menu help.
Links
Feedback link
Overview link
Displays general information about the window you’ve selected.
In addition, this link typically includes a list of procedures that can be completed using the window.
When you choose a procedure from the list on the Overview tab, a window that provides specific procedural help for that topic opens. You’ll see the window used, tasks that must be completed before beginning, and the steps to complete the task.
Fields link
Displays detailed information for each field in the window.
Buttons link
Displays detailed information for each button in the window.
Menus link
Displays detailed information for each menu and each menu item that can appear for the window. Not all windows will have the Menus link.
For information about alert messages, use the Search tab. Only messages that may require more information are documented.
S Y S T E M U S E R ’ S G U I D E 9
10 S Y S T E M U S E R ’ S G U I D E
Chapter 2: Using Microsoft Dynamics GP
Microsoft Dynamics GP has a standard interface to provide a consistent look and feel. You can use the mouse, the keyboard arrows, or the keyboard shortcut keys to move around in Microsoft Dynamics GP.
This information provides instructions for performing basic tasks in Microsoft
Dynamics GP. It is divided into the following sections:
•
•
Logging in to and quitting Microsoft Dynamics GP
•
The Microsoft Dynamics GP application window
System integration
Microsoft Dynamics GP is a comprehensive accounting and business management system composed of solutions that focus on meeting specific business needs and integrate with System Manager. The solutions are organized into groups of solutions that have similar purposes. Receivables Management and Invoicing solutions are grouped together in the Sales series, since both are used to maintain and update customer records. All solutions are posted to a core solution; for example, Receivables Management, which then are posted to General Ledger.
Some Microsoft Dynamics GP solutions integrate with one another when they’re installed. In an integrated system, information entered in one solution is shared with all the other solutions. Benefits of integration include faster data entry, fewer opportunities for errors, and more powerful, in-depth reporting. Lookup windows for accounts, customers, and other master records are available throughout
Microsoft Dynamics GP, regardless of where you first entered the records; if the record you want hasn’t been created yet, you can add it, then continue entering transactions using the new record. For information about the function of a specific module, refer to the documentation for that solution.
Contact your Microsoft Dynamics GP reseller for information about other tools and software available to customize your system.
S Y S T E M U S E R ’ S G U I D E 11
Logging in to and quitting Microsoft Dynamics GP
If you have trouble starting Microsoft Dynamics GP, contact your network administrator.
To log in to Microsoft Dynamics GP:
1.
From the Start Menu, choose All Programs >> Microsoft Dynamics >> GP 2010
>> GP.
2.
Enter your user ID and password.
Passwords are case-sensitive; be sure to use the correct capitalization.
3.
Mark the Remember user and password option to automatically log in to
Microsoft Dynamics GP the next time you start Microsoft Dynamics GP.
This option is available if the Enable Remember User field is marked in the
System Preferences window (Microsoft Dynamics GP menu >> Tools >> Setup
>> System >> System Preferences).
If the password is changed for this user ID, the Welcome to Microsoft Dynamics GP window will appear for you to mark this option again.
4.
Choose OK.
The Company Login window appears.
5.
Select a company.
12 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 U S I N G M I C R O S O F T D Y N A M I C S G P
6.
Mark the Remember this company option to automatically log in to the company the next time you start Microsoft Dynamics GP. You should mark this option for the company you work with the most often.
7.
Choose OK.
8.
If prompted, select an industry and role that is closest to your job description.
For more information, see
To switch to a different company or to log in as a different user while you are working in
Microsoft Dynamics GP, on the Microsoft Dynamics GP menu, choose User and
Company.
To quit Microsoft Dynamics GP:
1.
Save your work in the window you are working in.
2.
Choose Microsoft Dynamics GP menu >> Exit.
The Microsoft Dynamics GP application window
The Microsoft Dynamics GP application window has been designed to fit the needs of many different types of users. The application window is divided into several functionality areas.
Address bar
Toolbars Search box
Microsoft
Dynamics GP menu
Layout and
Help menus
Content pane
Navigation pane
Status bar
Address bar
The address bar displays the location of the current page within the navigation hierarchy of the application.
Microsoft Dynamics GP menu
The Microsoft Dynamics GP menu provides access to administrative tasks, user and company information, the User Date window, and user preferences.
Toolbars
You can use toolbars to navigate within Microsoft Dynamics GP.
Toolbars can be displayed above the content pane and below the address bar. Refer
on page 17 for more information.
Layout menu
Use the layout menu to hide or show the navigation pane, add or remove toolbars from the Microsoft Dynamics GP application window, or open the
S Y S T E M U S E R ’ S G U I D E 13
Customize Home Page window where you can modify the contents of your home page.
Help menu
The Help menu allows you to access the Microsoft Dynamics GP extensive online documentation system. You also can choose the Show Required
Fields option to display required fields in bold text or a different font from the other fields in the window.
Navigation pane
Use the navigation pane to select which list or page is displayed in the content pane. Refer to
Overview of the navigation pane
more information.
Content pane
The content pane can contain area pages, lists, or your home page.
Status bar
The status bar displays the user, date, and the company that you are logged in to.
Search box
The search box is displayed only if the administrator has set up
Microsoft Dynamics GP to use Microsoft Office SharePoint® Server 2007 search functionality. For more information, see
Microsoft Dynamics GP search overview
14 S Y S T E M U S E R ’ S G U I D E
Chapter 3: Navigation
Use the navigation pane to move within Microsoft Dynamics GP windows. You can customize the navigation pane to best suit your needs.
Information about using the navigation pane is organized into the following sections.
•
Overview of the navigation pane
•
Customizing the navigation pane
•
•
•
•
Microsoft Dynamics GP search overview
Overview of the navigation pane
You can use the navigation pane to move within Microsoft Dynamics GP without using a toolbar.
Shortcuts
Lists
Navigation pane buttons
The navigation pane consists of the following items:
Shortcuts
Choose the Home button to display your shortcuts in the navigation pane. For more information, see
Chapter 9, “Shortcut navigation.”
Lists
Choose a navigation pane button that corresponds to a series to display the lists that are available for that series in the navigation pane. When you click on the name of a list in the navigation pane, that list will be displayed in the content pane.
For more information, refer to
Navigation pane buttons
Choose a navigation pane button that corresponds to a series to display the lists that are associated with that series in the navigation pane and to display the area page that is associated with that series in the content
S Y S T E M U S E R ’ S G U I D E 15
pane. Choose the Home button to display your shortcuts in the navigation pane, and to display your home page in the content pane.
The following table lists the series buttons that are available in the navigation pane and the lists associated with them. The buttons and lists you see depend on which modules are marked in the Registration window.
Navigation pane buttons
Financial
Lists
Sales
Purchasing
Administration
Inventory
HR & Payroll
Manufacturing
Project
Field Service
Accounts, Account Transactions, Checkbooks, General Ledger
Batches, Report List, Microsoft Dynamics GP Reports, Excel
Reports, Reporting Services Reports, SmartList Favorites, Other
Reports, and Assets
Customers, Prospects, Salespeople, All Sales Transactions,
Receivables Transactions, Sales Order Transactions, Invoicing
Transactions, Receivables Batches, Report List, Microsoft
Dynamics GP Reports, Excel Reports, Reporting Services Reports,
SmartList Favorites, and Other Reports
Vendors, All Purchasing Transactions, Payables Transactions,
Purchase Order Transactions, Payables Batches, Report List,
Microsoft Dynamics GP Reports, Excel Reports, Reporting Services
Reports, SmartList Favorites, and Other Reports
All Reports List, My Reports List, Microsoft Dynamics GP Reports,
Excel Reports, Reporting Services Reports, SmartList Favorites, and Other Reports
Items, Bill of Materials, Item Transactions, Report List, Microsoft
Dynamics GP Reports, Excel Reports, Reporting Services Reports,
SmartList Favorites, Other Reports, and In-Transit Transfers
Employees, Applicants, Attendance Transactions, Report List,
Microsoft Dynamics GP Reports, Excel Reports, Reporting Services
Reports, SmartList Favorites, and Other Reports
Bills of Materials, Picking Documents, Job Costing, Routings,
Manufacturing Orders, Core Reports, Management Reports,
Planning Reports, Production Reports, All Manufacturing Reports,
Microsoft Dynamics GP Reports, Excel Reports, Reporting Services
Reports, SmartList Favorites, and Other Reports
Projects, Timesheet Transactions, Billing Transactions, PA purchase order transactions, Report List, Microsoft Dynamics GP
Reports, Excel Reports, Reporting Services Reports, SmartList
Favorites, and Other Reports
Service Call Transactions, Contract Transactions, RMA
Transactions, RTV Transactions, Depot Transactions, In-Transit
Transfers, Equipment, Report List, Microsoft Dynamics GP Reports,
Excel Reports, Reporting Services Reports, SmartList Favorites, and Other Reports
Customizing the navigation pane
The navigation pane is customizable on a per-user basis. You can customize the navigation pane in the following ways:
Hide the navigation pane
From the layout menu, select Navigation Pane to hide or show the navigation pane.
Resize the navigation pane
Drag the right border of the pane left or right until the pane is the size you want.
Display more series buttons
Choose the chevron in the bottom right corner of the navigation pane, and then choose Show More Buttons.
16 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 3 N A V I G A T I O N
Display fewer series buttons
Choose the chevron in the bottom right corner of the navigation pane, and then choose Show Fewer Buttons.
Display a set number of series buttons
Drag the top border of the series button pane up or down to display more or fewer buttons.
Change the order of series buttons
Choose the chevron in the bottom right corner of the navigation pane, and then choose Navigation Pane Options to open the Navigation Pane Options window.
Area pages
Area pages list the windows used to complete tasks for an area of functionality in
Microsoft Dynamics GP. For example, the Sales area page provides access to windows used to maintain customer records, enter sales transactions, enter orders, move quotes to orders, post sales batches, assess finance charges, print customer statements and more. An area page is similar to a site map for a Web page with this exception—area pages display windows for the selected functional area, not for the entire product. You can use the menus on the toolbar as an alternate way to access the same windows.
The list of windows that appears in an area page depends on the modules that have been marked in the Registration window.
Each area page groups the links to common windows and reports into categories that you can expand or collapse. To hide or show the windows listed in any of the categories in an area page, click the hide or show buttons on right side of each category title bar.
To work with an area page, from the navigation pane, choose a the button for a functional area, then select a window to open from the area page.
Toolbars
The Microsoft Dynamics GP toolbars contain specific tasks that you can complete for selected categories, such as transactions or cards, and are customizable on a peruser basis. Use toolbars to navigate quickly in Microsoft Dynamics GP. Predefined toolbars are available for you to use. By default, only the Main toolbar is available.
From the Layout menu, choose Toolbars and select the toolbar to display in
Microsoft Dynamics GP. You also can right-click in the toolbar area to hide or display toolbars. More toolbars are available only if you install and register additional series. For example, the Human Resources & Payroll toolbar will be available only if you have installed Human Resources.
S Y S T E M U S E R ’ S G U I D E 17
The following table lists additional toolbars that are available.
Toolbars
Main
Financial
Sales
Purchasing
Inventory
Human Resources & Payroll
Manufacturing
Windows, Commands, or Menus
Transactions menu
Inquiry menu
Reports menu
Cards menu
General Transaction Entry
Quick Journal Entry
Detail Inquiry
Financial Series Posting
Sales Transaction Entry
Receivables Transaction Entry
Receivables Batch Entry
Cash Receipts Entry
Sales Series Posting
Purchase Order Entry
Receivings Transaction Entry
Enter/Match Invoices
Payables Transaction Entry
Payables Series Posting
Item Transfer Entry
Item Transaction Entry
Item Maintenance
Inventory Series Posting
Employee Maintenance
Applicant
Payroll Transaction Entry
Attendance Transaction Entry
Benefit Deduction Summary
Employee Pay Code Maintenance
Manufacturing Order Entry
Manufacturing Component Transaction Entry
Manufacturing Order Receipt Entry
Manufacturing Order Close
Quick MO’s
Standard
Timesheet Entry
Employee Expense Entry
PA Purchase Order Entry
PA Receivings Transaction Entry
Billing Entry
SmartList
Task List
Reminders
Add custom commands as needed.
Custom
Customizing toolbars
Use the Toolbar Customization window to customize the toolbars available to you.
You can add commands to toolbars, as well as customize the appearance of commands. You also can remove commands from a toolbar.
18 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 3 N A V I G A T I O N
To customize a toolbar:
1.
Open the Toolbar Customization window
(Layout menu >> Toolbars >> Customize)
2.
Select a toolbar to add a window or command to.
3.
Choose Add to open the Add Command window.
4.
Choose a menu from the menu groups listed.
5.
In the Categories/Commands pane, expand a category to display the windows and commands in it, select a category or a command from the list.
6.
Choose OK.
The following table contains other actions you can complete to customize toolbars.
After you have finished customizing toolbars, choose OK to save your changes and close the window.
Action
Reset Toolbar
Delete a command
Change the order of commands on a toolbar
Rename a command
Procedure
Select a toolbar to reset from the drop-down list. Choose Reset
Toolbar to change the selected toolbar back to the default settings.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Delete to remove that command from the selected toolbar.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Move Up or Move Down to move the selected command to another position on the toolbar.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Modify Selection >> Name to open the Change Name window. Enter a new name for the command and choose OK to save your changes and close the window.
Change a command icon
Only show name of command on the toolbar
Only show icon of command on the toolbar
Show name and icon of a command on the toolbar
Use the default style to show a command on the toolbar
Divide a toolbar for easier viewing (insert a divider line)
If you are renaming a command to have an ampersand (&) or a pound (#) symbol in it, you must first enter a backward slash (\) before the symbol. Without the “\” a pound sign will appear as ellipses (...). The “&” will make the first letter of the word that is entered after it underlined in the menus.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Modify Selection >> Change
Button Image to open the Change Icon window. Select a new icon and choose OK to save your changes and close the window.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Modify Selection >> Text Only.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Modify Selection >> Image only.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Modify Selection >> Image and
Text.
Choose a toolbar from the drop-down list. Select a command in the controls pane, then choose Modify Selection >> Default
Style.
Choose a toolbar from the drop-down list. Select the command that the divider line will come before from the contents pane.
Choose Modify Selection >> Insert Divider Line.
S Y S T E M U S E R ’ S G U I D E 19
Microsoft Dynamics GP search overview
If the Microsoft Dynamics GP search feature has been enabled by an administrator, you can search for data in Office SharePoint Server 2007 from within the Microsoft
Dynamics GP application window.
If you have Business Portal installed and the Microsoft Dynamics GP search feature has been enabled by an administrator, you can search for Microsoft Dynamics GP data as well as Office SharePoint Server 2007 data from within the Microsoft
Dynamics GP application window.
To search for data, enter a keyword into the Search field in the Microsoft Dynamics
GP application window and press
ENTER
. Search results are displayed in a separate
Web browser window.
20 S Y S T E M U S E R ’ S G U I D E
Chapter 4: Lists
Use lists to perform actions against one or multiple records. Lists are displayed in the content pane of the Microsoft Dynamics GP application window.
This information is divided into the following sections:
•
•
•
•
•
•
•
Exporting list results to Microsoft Excel®
List overview
Lists can help you reduce the amount of time that it takes to complete some of your daily tasks within Microsoft Dynamics GP. Lists allow you to view a list of similar records, select one or more records and then perform actions against all of the records that you selected at the same time. For example, in the customers list, you can select multiple customer records and then apply or remove a hold from all of the customers that you selected. There are two types of lists—primary lists and list views.
You can personalize a primary list but you cannot customize a primary list. A list view shows a subset of items in a primary list and can be customized to display only the information that you want to display. You must have security access to the primary list that a list view is based on in order to view that list view.
You can search for a specific record in a list by entering a search term in the Look
For field.
For more information, see
S Y S T E M U S E R ’ S G U I D E 21
The following areas that make up a list except for Business Analyzer. The illustration below shows the list without Business Analyzer. For more information
about Business Analyzer, see Chapter 5, “Business Analyzer.”
Action pane
Filter area
Message bar
List area
Information pane
Action pane
The action pane is divided into groups that contain action buttons Each action button can be used to add new records to the list or to perform actions against the records you have selected in the list, and to open windows to display more information about a record.
An overflow menu, which will appear to the right of a group, contains the action buttons that aren’t displayed in the group. If you shorten an action pane, action buttons will move into the overflow menu. Secondary action buttons will move into the overflow menu before the primary action buttons. You can specify the priority of an action button in the Action Pane Details window. See
on page 24 for more information.
The action buttons that are displayed on the action pane depend on which list is displayed, your personal settings for the list, and the security access that you have.
Filter area
You can use filters to display only the records in a list that meet conditions that you specify.
See
on page 23, for more information.
You only can save filters that you created for a list view if you have been granted “write” access to that list view. See
Customizing a list view on page 24 for more information.
22 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 4 L I S T S
Message bar
The message bar is displayed above the list area after an action has been performed against a record in the list. The message bar displays information about the failure or success of actions that you perform against records in a list.
Double-click the message bar to open the Message Bar Details window, where you can view specific details about each action that was attempted or performed.
List area
The list area is where the records that make up a list are displayed. You can sort records by any of the columns that are displayed.
You also can drag and drop the columns that are displayed in a list to reorder them.
For more information, see
Information pane
The information pane displays information that is related to the record that you selected. The type of information that is displayed depends on the type of record that you selected. If you have multiple records selected in a list, the information for the last record that you selected will be displayed in the information pane.
Displaying a list
Lists are displayed in the content pane of the Microsoft Dynamics GP application window.
To display a list:
1.
In the Microsoft Dynamics GP application window, select a series button from the navigation pane to display the lists available for that series.
2.
Choose the list to display.
Filtering a list
You can use filters to display only the records in a list that meet conditions that you specify.
Filters that you add to a primary list will not be saved; however, you can save the primary list with your added filters as a new list view. For more information, see
You must have read/write access to a list view to save any filters that you add to a list view.
To filter a list:
1.
Display the list that you want to add a filter to. See
for more information.
2.
If the filter options area is not displayed, choose Show >> Filter Options from the list title drop-down menu.
3.
In the filter options area, specify the filter criteria.
S Y S T E M U S E R ’ S G U I D E 23
4.
Choose Add filter to add another filter to your list view. Each time you choose
Add filter, you will need to enter more filter criteria.
5.
After you’ve finished adding filters, choose Save from the list title drop-down menu.
Creating a list view
A list view shows a subset of records in a primary list and can be customized to display only the information that you want to display.
You can create new list views from a primary list or from another list view. You are automatically the owner of any list view that you create. After you create a list view, you can customize it.
You must have security access to the List View Customization window in order to create a list view.
To create a list view:
1.
Display the primary list or the existing list view that you want to use as the basis for your new list view. See
information.
2.
From the list title drop-down menu, choose Save As.
3.
Enter a unique name for the list view and choose Save.
4.
Now you can customize your list view. See
more information.
Customizing a list view
If you are an owner of a list view, or have read/write access to a list view, you can customize the way that information is displayed in a list view so that all users who have access to the list view will see the changes.
You cannot customize a primary list, only a list view.
To customize a list view:
1.
Display the list to be customized. For more information see
24 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 4 L I S T S
2.
From the list title drop-down menu, choose Customize to open the List View
Customization window.
3.
Specify the companies to which the list should be visible.
4.
Mark the content of the list view that should be displayed by default. If you choose to not show the action pane, the action pane will be replaced by a menu that contains the same actions.
5.
Choose the Columns expansion button to open the Columns Details window, where you can specify which columns should be displayed in the list view.
6.
Choose the Action Pane expansion button to open the Action Pane Details window, where you can add or remove actions and groups, or specify the priority of a action or group in the action pane.
7.
Choose the Sharing expansion button to open the Sharing Details window, where you can specify the users or roles that can access the list view.
8.
Choose the Report Settings expansion button to open the Report Settings window, where you can select the SQL Server Reporting Services reports to display in Business Analyzer for the list view. For more information, see
Selecting report settings for Business Analyzer
9.
If you want to preview your changes, choose Preview. Otherwise, choose Save to save your changes.
If you choose to preview the list view, the List View Customization window will close and you can see the changes that you made to the list view. If you navigate away from the previewed list view, a dialog box will be displayed where you can choose to save or discard your changes.
If you want to make more changes after you preview the list view, repeat steps
2-8.
S Y S T E M U S E R ’ S G U I D E 25
List personalizations
Some changes that you can make to a primary list or a list view are visible only for you and will not be visible to others who have access to that list. These changes are called personalizations. You can personalize each list separately and your changes will be remembered the next time you log in to Microsoft Dynamics GP.
You can make the following personalizations to a list.
Columns
You can drag and drop columns to put them in the order that you want them. You also can resize the width of the columns to be the size that you want.
Sort order
You can sort a list by clicking on any one of the column headings that are displayed in the list.
Information pane
You can choose to hide or show the information pane by choosing Show >> Information Pane from the list title drop-down menu. You also can resize the information pane vertically by dragging the top border up or down.
Filter options
You can hide or show the filter options area by choosing Show >>
Filter Options from the list title drop-down menu.
Action pane
You can hide an action pane by choosing Show >> action pane from the list title drop-down menu.
If you hide an action pane, a menu will be displayed instead of the action pane. The same actions that were displayed on the action pane will appear in the menu. To hide the menu and show the action pane again, select the list title drop-down menu and choose Show >> action pane.
Exporting list results to Microsoft Excel
®
You can export lists results to Microsoft Excel if you have Microsoft Excel installed on your computer.
To export list results to Microsoft Excel:
1.
Display the list with the results that you want to export. For more information see
2.
Choose the Go To button and then choose Send to Excel from the drop-down menu. An Excel workbook that contains the list results is displayed.
26 S Y S T E M U S E R ’ S G U I D E
Chapter 5: Business Analyzer
You can use Business Analyzer to help you make business decisions by viewing
Microsoft Dynamics GP reports from primary lists and list views. You can take actions on the reports and share report information with others.
The following information is discussed.
•
•
Business Analyzer actions for reports
•
Selecting user settings for Business Analyzer
•
Selecting report settings for Business Analyzer
•
•
Displaying a list with Business Analyzer
•
Displaying reports in Business Analyzer
•
Reloading reports in Business Analyzer
Business Analyzer overview
You can use Business Analyzer to select and view SQL Server Reporting Services reports in Microsoft Dynamics GP from primary lists and list views. Business
Analyzer is automatically displayed with a list. To view reports, you must have security access to the Microsoft SQL Server Reporting Services reports in Report
Manager or Microsoft SharePoint.
You can perform actions for reports in Business Analyzer, such as editing the report in Report Builder or copying a report image. You also can assign contacts in
Microsoft Office Communicator 2007 R2 or Microsoft Lync™ 2010 to reports so you can share report data with people that you commonly work with.
The following areas make up Business Analyzer.
Report actions
Primary report area
Secondary report area
Report slide show
Primary report area
Displays the main report or reports for you to view. A main report is typically a single report. You can have more than one report displayed in the area. The report actions are available for each report within the primary report area.
S Y S T E M U S E R ’ S G U I D E 27
Icon
Secondary report area
Displays the secondary report or reports for you to view. Secondary reports are typically multiple reports. You may have more than one report displayed in the area. You can click a report in the secondary report area to display the report in the primary report area.
Report actions
Use report actions that are available for each report within the primary report area.
When you place the cursor over a report, the action buttons are displayed. For more information about the report actions, see
Business Analyzer actions for reports
Report slide show
View the previous or next report in the secondary report area. You also can start or pause a slide show of your reports. How often the reports change when viewing a slide show depends on your selection in the User Information pane in the Microsoft
Dynamics GP Business Analyzer Configuration window.
Business Analyzer actions for reports
The following actions are available for each report within the primary report area.
When you place the cursor over a report, the action buttons are displayed.
Name
Show Report Information
View Report
Edit Report
Copy Report Image
Change Date
Description
Opens a window that displays the name of the company, the date and time the report was generated, and the location of the report. You can click the report information window to keep the window open.
Note: If you were assigned to only the browser role in Report Manager, the company name is not displayed.
Opens the report in Report Viewer or in Microsoft SharePoint, depending on how the report server was set up. By viewing the report, you can generate the report using various parameters. For example, if chart you are viewing is using columns to display information, you can change the chart type and generate the report with lines.
Opens Microsoft SQL Server Report Builder, where you can modify a report.
Before you can modify a report, you must have access to modify the report.
Copies an image of a report to the clipboard so you can share the report by pasting the report in an email or another application. To copy a report to Communicator or Lync, you must save the report image to a file, and then copy the file into a conversation.
Allows you to generate the report using a different date; based on different date tokens.
You also can enter a custom date.
Start Communication Allows you to share report data with people you commonly work with.
Add Contact to Report Opens the Microsoft Dynamics GP Business Intelligence
Configuration window, where you can assign contacts in Lync or Office Communicator to reports. You also can remove contacts.
Select Other Contact Opens the Send an Instant Message window, where you can select a contact. Click OK to start a conversation with the contact.
28 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 5 B U S I N E S S A N A L Y Z E R
Selecting user settings for Business Analyzer
The User Settings window allows you to define your user settings for reports displayed in Business Analyzer. You can change your role, select how often reports should change when viewing a slide show, and select the size of the reports displayed in Business Analyzer.
To select user settings for Business Analyzer:
1.
Display the primary list or the existing list view. See
2.
From the list title drop-down menu, choose Business Analyzer Settings to open the User Settings window.
3.
View your current role. To change your role, choose Edit to open the Select
Home Page window.
Each time you change your home page role, any customizations that you have made to the Metrics, Quick Links, or Microsoft Office Outlook areas on your home page are removed.
4.
Select how often reports should change when viewing a slide show.
5.
Select the default size that reports should be displayed in dashboard mode.
6.
Choose OK to save you changes and close the window.
Selecting report settings for Business Analyzer
You can use the Report Settings window to select which reports to display in
Business Analyzer for the list. You can arrange the order of the reports that appear in Business Analyzer. You also can add or remove multiple reports.
If you are an owner of a list view, or have read/write access to a list view, you can customize the way that information is displayed in a list view so that all users who have access to the list view will see the changes.
You cannot customize a primary list, only a list view.
S Y S T E M U S E R ’ S G U I D E 29
To select report settings for Business Analyzer:
1.
Display the list to be customized. For more information see
2.
From the list title drop-down menu, choose Customize to open the List View
Customization window.
3.
Choose the Report Settings expansion button to open the Report Settings window.
Default reports appear in the Reports Selected list for the role you selected in the User Settings window.
4.
In the Reports Available list, select the report or the reports that you want to display in Business Analyzer and choose Insert.
5.
You can select a report from the Reports Selected list and then complete one of the following actions.
• Choose Move Up or Move Down to rearrange the order that the reports are displayed in Business Analyzer.
• Choose Remove to remove the report that you selected from the Reports
Selected list. You can select to remove multiple reports.
• Choose Edit to open the Microsoft SQL Server Report Builder window, where you can edit the selected report. You must be using Report Builder
2.0 or Report Builder 3.0 to modify SQL Server reporting services reports and metrics.
6.
Choose OK to save you changes and close the window.
30 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 5 B U S I N E S S A N A L Y Z E R
Assigning reports to contacts
Use the Microsoft Dynamics GP Business Intelligence Configuration window to assign contacts in Microsoft Lync 2010 or Office Communicator 2007 to reports.
To assign contacts to reports:
1.
Open the Microsoft Dynamics GP Business Intelligence Configuration window.
From a report in the primary area, choose Start Communication, and then choose Add Contact to Report.
2.
Select display information in the Selected reports list tree view by contact or by report.
3.
Select to display a group of contacts or all contact groups in the Selected reports list.
4.
Select a contact or all contacts.
5.
The information displayed in the Selected Reports list depends on your previous selections.
6.
Depending on your previous selections, you can assign reports to contacts or contacts to reports by marking the contacts or reports. You can unmark the contact or report to unassign the report or contact.
To select all contacts or reports displayed in the list, choose Select All.
7.
Choose OK to save your changes and close the window.
Displaying a list with Business Analyzer
Business Analyzer is automatically displayed with a list. If you don’t want Business
Analyzer to display with a list, you can hide Business Analyzer.
S Y S T E M U S E R ’ S G U I D E 31
To display Business Analyzer with a list:
1.
Display the primary list or the existing list view. See
for more information.
2.
From the list title drop-down menu, choose Show/Hide.
Business Analyzer is automatically marked to be displayed with a list. If you don’t want Business Analyzer to display with a list, unmark Business Analyzer.
Displaying reports in Business Analyzer
You can display reports in Business Analyzer by split mode or dashboard mode. If you select dashboard mode, all the reports display in the primary report area. If you select split mode, one report displays in the primary report area while the rest of the reports display in the secondary report area.
To display reports in Business Analyzer:
1.
Display the primary list or the existing list view. See
for more information.
2.
From the list title drop-down menu, choose Business Analyzer, and then select
Display in Dashboard Mode or Display in Split Mode.
Reloading reports in Business Analyzer
You can update reports by choosing Reload All Reports from the Business Analyzer menu. For example, if you display a transaction list and then perform several tasks, you can choose the Reload All Reports option from the Business Analyzer menu to update the information on the reports.
To reload reports using the Business Analyzer menu:
1.
Display the primary list or the existing list view. See
for more information.
2.
From the list title drop-down menu, choose Business Analyzer, and then select
Reload Add Reports.
You also can reload a single report, for example, after marking or unmarking records in the list area by clicking the Reload report icon for the report.
32 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 5 B U S I N E S S A N A L Y Z E R
To reload a report using the Reload report icon:
1.
Display the primary list or the existing list view. See
for more information.
2.
Mark or unmark records in the list area.
3.
Click the Reload report icon for the report.
S Y S T E M U S E R ’ S G U I D E 33
34 S Y S T E M U S E R ’ S G U I D E
Chapter 6: Home pages
A home page provides you with quick access to information that you might need throughout your work day.
Information about using a home page is divided into the following sections.
•
•
•
•
•
Customizing the Metrics area on your home page
•
Customizing the Microsoft Office Outlook area on your home page
•
Setting up My Reports on your home page
•
Customizing the My Reports area on your home page
•
Customizing the Quick Links area on your home page
•
Customizing the To Do area on your home page
Home pages overview
A home page provides easy access to information that you need for your job. From your home page, you can see a summary of your appointments, a list of your tasks and reminders, and the number of unread e-mail messages that you have, as well as other information specific to your job.
The first time that you log in to Microsoft Dynamics GP, you can select a role that is similar to your job if you are not already assigned a role, and information that might be specific to your job will be available to you. For more information, see
You also can select to use a basic home page which is empty and you can customize the layout of your home page. For more information about customizing your home page see
You can display the following areas on your home page.
Connect
This area displays a series of slides that allow you to get self-help support, get information, and perform training from the home page. Connect is available to all users on the home page and is specific to each user's home page role.
CustomerSource access is based on your Business Ready Enhancement Plan. To enable Connect, use the Customize Home Page window. For more information, see
If you are using Internet Explorer Enhanced Security Configuration, be sure to add the
Microsoft Dynamics Online Connect Web site as a trusted site.
Metrics
This area displays graphical representations of Microsoft Dynamics GP data. For example, the New Employees for the Past 12 Months metric will display the number of new employees that were hired in each of the last twelve months. You can use the Metric Details window to select which metrics to display on your home
page. For more information, see
Customizing the Metrics area on your home page
S Y S T E M U S E R ’ S G U I D E 35
For the Metrics area on our home page to be available, Microsoft Office Web Components must be installed on your computer or Microsoft SQL Server
®
2008 Reporting Services or
Reporting Services 2008 R2 must be installed and set up to use with Microsoft Dynamics
GP.
If you are using Reporting Services 2008 or Reporting Services 2008 R2 to display metrics, you can click the View icon to display a metric in Report Viewer or press
SHIFT
and then click a data point in the metric to open a detailed report for additional information. If you display the metric in Report Viewer, you can click a data point in the metric to open a detailed report.If you want to view additional data in the detailed report, you can click certain data fields to open the maintenance or inquiry window related to that data field. You also can create your own metrics to display in your home page.
Microsoft Office Outlook
®
This area displays appointments and the number of unread e-mail messages that you have. Use the Microsoft Office Outlook Details window to select which information to display on your home page. For more information, see
Customizing the Microsoft Office Outlook area on your home page
This information is available only if you have Microsoft Office Outlook installed on your machine.
My Reports
This area displays a list of the ten reports that you use most frequently and that have been added to your My Reports list. Use the Report List window to add reports to your My Reports list. For more information, see
Reports area on your home page
For more information about My Reports, see
Quick Links
This area displays links to Microsoft Dynamics GP windows, Web pages, navigation lists and external programs that you have set up as quick links. Use the Quick Links details window to add, modify, or delete quick links. For more information, see
Customizing the Quick Links area on your home page
To Do
This area displays the tasks that are assigned to you, predefined reminders, customized reminders, and Workflow notifications that you have set up. You can select to display tasks, reminders, or tasks and reminders. For more information, see
Customizing the To Do area on your home page
36 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 6 H O M E P A G E S
You can specify whether to view predefined reminders and customized reminders as text or as Cues. A Cue is an icon that increases or decreases in height to indicate the number of records in a particular reminder category.
Reminder as a text Reminder as a Cue
For more information, see
Setting up predefined reminders
Selecting your home page role
The first time that you log in to Microsoft Dynamics GP, you can select to have default information that is specific to your job displayed on your home page. When you select a home page role that is similar to your job responsibilities, the information that is displayed on your home page will be set up for you to use right away. Reminders, reports, SmartList favorites, and metrics that you might use daily will be displayed on your home page, and default settings for each of the five areas of your home page will be applied.
Your home page role is not the same as your security role. The home page role that you select does not effect the security access you have within Microsoft Dynamics GP.
To select your home page role:
1.
In the Select Home Page window that is displayed the first time that you log in to Microsoft Dynamics GP, select the type of industry that you work in.
2.
To learn more about a home page role, read the text that is displayed for each of the roles, and then select a role that is closest to your job responsibilities.
3.
Choose OK to close the window. Your home page will be displayed and will include default information for the role that you selected.
S Y S T E M U S E R ’ S G U I D E 37
Changing your home page role
If your responsibilities in your company change, you can change your home page role so that default information that is specific to your new responsibilities is displayed on your home page.
Each time you change your home page role, any customizations that you have made to the
Metrics, Quick Links, or Microsoft Office Outlook areas on your home page are removed.
To change your home page role:
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
3.
Choose Change Role to open the Select Home Page window.
4.
Select the type of industry that you work in.
5.
To learn more about a home page role, read the text that is displayed for each of the roles, and then select a role that is closest to your job responsibilities.
6.
Choose OK to close the window. Your home page will include default information for the role that you selected.
Customizing your home page
Use the Customize Home Page window to add content areas to your home page, remove content areas from your home page, modify the layout of your home page, and change your home page role.
Home page settings are saved for each user and can be modified at any time.
To customize your home page:
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
38 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 6 H O M E P A G E S
3.
Mark the content areas to display on your home page.
4.
To modify the layout of your home page, select a content area from either
Column 1 or Column 2 and use the arrow buttons, the Move Up button, or the
Move Down button to reposition it.
5.
Choose OK to save your settings and close the Customize Home Page window.
Customizing the Metrics area on your home page
Use the Metrics Details window to add or remove metrics to be displayed in the
Metrics area of your home page. You also can use the Metrics Details window to assign default metrics to the home page role for each user.
If you are using SQL Server 2008 Reporting Services or SQL Server 2008 R2
Reporting Services to display metrics, assign default metrics. If you don't assign default metrics, no metrics will appear in the Metrics Available list.
To customize the Metrics area on your home page:
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
3.
Mark the Metrics option to display the Metrics area on your home page.
4.
Mark Show All to display multiple metrics at the top of your home page. This option is available if Microsoft SQL Server 2008 Reporting Services is installed and set up to use with Microsoft Dynamics GP.
For information about setting up SQL Server 2008 Reporting Services to use with Microsoft Dynamics GP, see the System Setup instructions (Help >>
Contents >> select Setting Up The System).
5.
Choose the Metrics expansion button to open the Metrics Details window.
6.
Select a metric from the Metrics available list and choose Insert to display that metric on your home page.
S Y S T E M U S E R ’ S G U I D E 39
7.
You can select a metric from the Metrics to display list and then complete one of the following actions.
• Choose Move Up or Move Down to rearrange the order that the metrics are displayed on your home page.
• Choose Remove to remove the metric that you selected from the Metrics to display list.
• Choose Defaults to assign default metrics to the home page role.
• Choose Edit to open the Microsoft SQL Server Report Builder window, where you can edit the selected report. You must be using Report Builder
2.0 or Report Builder 3.0 to modify reporting services reports and metrics.
8.
Choose OK to save your settings and close the window.
Customizing the Microsoft Office Outlook area on your home page
Use the Microsoft Office Outlook Details window to specify the information to display in the Microsoft Office Outlook area on your home page. You can display calendar entries, unread e-mail messages, or calendar entries and unread e-mail messages from Microsoft Office Outlook.
To customize the Microsoft Office Outlook area on your home page:
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
3.
Mark the Microsoft Office Outlook option to display the Microsoft Office
Outlook area on your home page.
4.
Choose the Microsoft Office Outlook expansion button to open the Microsoft
Office Outlook Details window.
5.
Mark the Inbox summary option to display the number of unread e-mail messages that you have in Outlook.
6.
Mark the Calendar option to display a list of your calendar entries, and select the number of days to display calendar entries for.
7.
Choose OK to save your settings and close the window.
40 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 6 H O M E P A G E S
Setting up My Reports on your home page
Use the Add Reports window to specify how reports will be added to your My
Reports list for the first time.
To set up My Reports on your home page:
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
3.
Mark the My Reports option to display the My Reports area on your home page.
4.
Choose OK to save your changes and close the Customize Home Page window.
5.
Click the Add reports link in the My Reports area of your home page to open the Add Reports window.
1.
Select a method for adding reports to your My Reports list.
Automatically add reports that are specific to the work that I do
Mark this option to use a default My Reports list that contains reports that are specific to the role that you selected in the Select a Role window. For more information, see
You also can add reports to your My Reports list at a later date.
Manually add reports
Mark this option to manually add reports to your
My Reports list.
2.
Choose OK.
• If you marked the Automatically add reports that are specific to the work that I do option in step 6, reports will be displayed in the My Reports area when you update your home page. To update your home page, choose
View >> Refresh.
• If you marked the Manually add reports option in step 6, the Report List window is displayed. To add, remove, or rename reports on your My
Reports list see
Customizing the My Reports area on your home page
Customizing the My Reports area on your home page
Use the Report List window to customize your My Reports list. The My Reports area on your home page displays the names of the ten most frequently used reports from your My Reports list. The report that you use most frequently will be the first report listed in the My Reports area. You also can add, remove, or rename reports on your My Reports list.
S Y S T E M U S E R ’ S G U I D E 41
To customize the My Reports area on your home page
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
3.
Mark the My Reports option to display the My Reports area on your home page.
4.
Choose OK to save changes and close the Customize Home Page window.
5.
In the navigation pane, expand the Report Shortcuts item and choose My
Reports to display the My Reports list.
6.
Use the buttons in the action pane to add, rename, or delete reports in your My
Reports list. See Chapter 4, “Lists,” for more information about using lists.
Customizing the Quick Links area on your home page
Use the Quick Links Details window to add, modify, or delete quick links in the
Quick Links area on your home page. You can add quick links to Web pages, external programs, navigation lists, or Microsoft Dynamics GP windows.
To customize the Quick Links area on your home page:
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
3.
Mark the Quick Links option to display the Quick Links area on your home page.
4.
Choose the Quick Links expansion button to open the Quick Links Details window.
5.
Choose Add and select an option from the drop-down list. Then complete one of the following actions.
Microsoft Dynamics GP window
The Add Command window is displayed. Select a window and choose OK.
42 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 6 H O M E P A G E S
Microsoft Dynamics GP navigation list
The Add List window is displayed. Select a list and choose OK.
Web page
The Add Web Page window is displayed. Enter a name for the
Web page and the Web page address and choose OK.
External program or file
The Add External Program window is displayed.
Enter the name of the program or file and browse to the file name and choose
OK.
6.
In the Quick Links Details window, you can select a quick link and complete one of the following actions.
• Choose Move Up or Move Down to rearrange the order of the quick links on your home page.
• Choose Modify to change the name of the quick link that you selected. You cannot change the name of a quick link to a Microsoft Dynamics GP navigation list.
• Choose Delete to delete the quick link.
7.
Choose OK to save your settings and close the window.
Customizing the To Do area on your home page
Use the To Do Details window to specify the information to display in the To Do area of your home page. You can select to display reminders, tasks, or reminders and tasks on your home page.
To customize the To Do area on your home page:
1.
Display your home page.
(Choose the Home navigation pane button)
2.
Click the Customize this page link at the top of the content pane to open the
Customize Home Page window.
3.
Mark the To Do option to display the To Do area on your home page.
4.
Choose the To Do expansion button to open the To Do Details window.
5.
Mark the Microsoft Dynamics GP reminders option to display a list of reminders on your home page.
S Y S T E M U S E R ’ S G U I D E 43
The types of reminders that will be displayed on your home page will depend on the selections you make in the Reminder Preferences window. For more information see
Setting up predefined reminders on page 109 or
Creating customized reminders on page 110.
6.
Mark the Microsoft Dynamics GP tasks option to display a list of the tasks that are assigned to you on your home page.
7.
Mark the Microsoft Workflow notifications option to display a list of your
Workflow notifications.
8.
Choose OK to save your settings and close the window.
44 S Y S T E M U S E R ’ S G U I D E
Chapter 7: Microsoft Dynamics GP windows
To enter data and review information in Microsoft Dynamics GP, you’ll use individual windows. This information explains the common features and functions of the Microsoft Dynamics GP windows.
This information is divided into the following sections:
•
•
•
•
•
•
•
•
•
Opening a window
Some of the tasks that you can complete in Microsoft Dynamics GP, such as setting up your accounts or entering transactions, are assigned to one or more windows.
From the windows, you can enter information into Microsoft Dynamics GP, process that information, and look up information you need and print reports.
To open a window from a toolbar:
1.
From the a toolbar, choose the type of task you want to do.
For example, to create a transaction, choose Transactions from the Main toolbar.
2.
Choose a series. The corresponding menu appears.
For this example, choose Financial.
For this example, select General. The Transaction Entry window appears, where you can enter and post transactions to the General Ledger.
In the other procedures, “>>“ is used to indicate the menus that you need to choose to open a particular window; for example, Transactions >> Financial >> General.
To open a window from an area page:
1.
From an area page, expand a content area to display the tree view that contains the links that are available. See
on page 17 for more information.
For example, to create a financial transaction, display the Financials an area page, and expand the Transactions content area.
2.
Expand the tree view until you find the correct link.
For this example, select the plus symbol next to Financial to display the links available at that level.
3.
Select the link to open a window.
For this example, select General to open the Transaction Entry window.
S Y S T E M U S E R ’ S G U I D E 45
Data entry fields
Data entry fields are fields in which you can make a selection or enter information.
You’ll use many different types of data entry fields throughout the Microsoft
Dynamics GP system.
Editable field
Check box
Display-only field
Option
Drop-down list Multi-select
Editable field
Enter information by typing it into the window. Editable fields are displayed according to your specifications in the User Display Preferences window
(Microsoft Dynamics GP menu >> User Preferences >> Display button).
If you’ve marked the Show AutoComplete Suggestions option in the AutoComplete
Setup window ((Microsoft Dynamics GP menu >> Tools >> Setup >> User
Preferences >> AutoComplete button), previous entries that you’ve made for editable fields that have a lookup button are saved.
When you begin typing information in one of these fields, possible matches are suggested in a list, as shown in the following illustration.
If a suggestion in the list matches your criteria for that field, select the suggestion or press the
DOWN ARROW
key to select the suggestion and press
ENTER
. To remove an individual suggestion from the list, right-click on the entry to remove and select
Remove From List. You can select the <<More...>> option in a suggestion list to open the lookup window related to the field. If no suggestion matches what you are typing, continue typing.
Display-only field
Shows information you’ve entered elsewhere. It appears as a gray box and can’t be edited.
46 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 7 M I C R O S O F T D Y N A M I C S G P W I N D O W S
Horizontal scrolling field
Allows you to scroll left or right to see an entire entry if it doesn’t fit in a field.
Options
Allows you to select one option from a list. The selected option is marked with a black dot.
Check box
Allows you to select many options, depending on your particular needs. Selected options have a check mark in the box next to them. Unavailable options are dimmed.
Multi-select box
Displays a list of options from a set of predetermined choices.
You can select multiple options from the list by holding down the
SHIFT
or
CTRL
key and clicking on the applicable items in the list.
Drop-down list
Allows you to select a single option from a list by clicking the arrow button to the right of the field.
Primary windows
Primary windows can be opened from a list, toolbar, area page, or from another primary window. You’ll use primary windows to enter information needed to complete specific tasks in Microsoft Dynamics GP. You’ll typically work with one record at a time.
Menu bar
Window toolbar
Data entry area
Status bar
Each primary window contains a menu bar that contains additional commands for the window or record that is displayed.
Window toolbar
Within the toolbar for a primary window, you can work with the data you enter by choosing from command buttons located on the toolbar. Other command buttons are located on the right side of the toolbar and may vary by window.
S Y S T E M U S E R ’ S G U I D E 47
The following are the most common buttons you’ll see in the window toolbar:
Save button
Choose Save to save the information you have entered for a record.
Clear button
Choose Clear to erase the information you have entered in a window.
Delete button
Choose Delete to remove a record from the Microsoft Dynamics
GP system.
Print icon button
Prints a report using the information displayed in the window. If more than one report can be printed, the button displays a menu.
Currency list button
Changes the currency view so you can display multicurrency transactions in the originating or the functional currency. The option you choose will be saved on a per-user, per-window basis. The View >> Currency menu items in a primary window provide the same functionality.
Data entry area
Primary windows show data entry fields, where you enter information, and display-only fields that can’t be edited. Use the
TAB
key to move between fields in a primary window.
For more information about data entry, see Chapter 17, “Transactions and batches.”
Lookup button
Expansion button
Browse buttons
Help button
To view fields that you must provide entries for, choose Help >> Show Required Fields.
Lookup button
The lookup button indicates that a lookup window—a list of items already entered in the Microsoft Dynamics GP system—is available for a particular field or window. You’ll select an item from the list to enter in the window.
Expansion button
The expansion button opens an window where additional information for the field next to the button can be added, changed, or viewed.
48 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 7 M I C R O S O F T D Y N A M I C S G P W I N D O W S
Browse buttons
Browse buttons allow you to scan information, such as accounts, transactions, and customer records. You can browse through records using whatever sorting method you’ve selected for the window. For example, to modify previously entered transactions, you can use the browse buttons to browse through the journal entries for a given batch until you find the transactions you want.
Help button
The Help button opens Microsoft Dynamics GP help. For more information see
Window notes button
Window-level notes can be attached to individual windows throughout the system. Notes can be edited and reattached, or deleted. If several people are entering information on the same note, you may want to identify each entry with a date and the user ID of the person entering the note. If a note is attached, the “page” icon will appear to have lines of text in it. If no note is attached, the “page” icon will appear to be blank.
Window notes button
Task windows
Task windows typically open from primary windows, such as transaction entry, inquiry, or cards windows. These windows contain buttons that you can choose to perform an action and close the task window. Within task windows or secondary windows, you’ll specify options or enter specific details about the information in a primary window.
Task windows don’t contain a toolbar, but they do have menus as well as Note buttons that work similarly to the same controls on primary and secondary windows.
S Y S T E M U S E R ’ S G U I D E 49
Scrolling windows
Scrolling windows always appear within another window. Use scrolling windows to view a list of previously entered records, transactions, or accounts in the
Microsoft Dynamics GP system.
After you have entered information in the scrolling window, press
CTRL
+
TAB
to move to the next field or button in the main window. To move to the field or button before the scrolling window, press
CTRL
+
SHIFT
+
TAB
.
Scrolling window
Hide and show buttons
Some scrolling windows allow you to view either single or multiple lines of information for each item in a scrolling window. If you choose the hide button to view a single line of information, only summary information is displayed for each item.
If you choose the show button to view multiple lines of information, you can see detailed information about fewer items at a time. In both cases, you can scroll to view additional items.
50 S Y S T E M U S E R ’ S G U I D E
Hide and show buttons
C H A P T E R 7 M I C R O S O F T D Y N A M I C S G P W I N D O W S
Lookup windows
In lookup windows, you’ll look up and choose from existing information to enter in another window.
Find by field
To quickly locate a record from the existing list, enter the first few characters of the record to search for in the Find by field.
New button
Choose New to add a new record to the Microsoft Dynamics GP system.
Open button
Choose Open to open a related window with more information about the record you selected in the lookup window.
Refresh button
Choose Refresh to update the contents of the window to reflect any changes entered by you or other users.
Sortable column headings
In selected lookup windows, you can sort by the column headings listed. To change your sorting method, click the column heading to sort by.
Select button
Choose Select to select an entry. The entry and corresponding information about it will appear in the primary or secondary window.
Help button
Choose Help to open the help file for the lookup window.
Note button
Choose this button to open the Note window. You can enter text in the Note window to attach a note to the lookup window.
S Y S T E M U S E R ’ S G U I D E 51
Advanced lookups
Advanced lookups are selected Microsoft Dynamics GP lookup windows with extra capabilities that you can use to quickly look up records within the lookup window and use an advanced search option to locate information by any field in the database.
Advanced search button
View menu
Note button
Additional sorts list
Advanced Search button
To perform a more advanced search, choose the
Advanced Search button. The SmartList Search window opens, and you can enter additional search criteria. For more information, see
View menu
Select a search method from the list of choices in this drop-down menu. You can view all the possible entries or restrict the list. You can define and save a default lookup view for your master records. You also can choose from a list of predefined SmartList favorites. For more information about SmartList favorites, see
on page 153. The method you select will appear in the View
heading.
Sortable column headings
In advanced lookup windows, you can sort by the column headings listed. To change your sorting method, click the column heading to sort by.
Additional Sorts list
Use the Additional Sorts list to display another column of information and to sort from it. You also can choose to perform a custom sort from this list.
52 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 7 M I C R O S O F T D Y N A M I C S G P W I N D O W S
Stop button
The Stop button stops a search in progress. The Stop button appears on the right side of the window’s status area when a search is in progress.
Sortable column headings
Additional sorts list
Note windows
Within note windows, you’ll enter information about a window or procedure. You can refer back to these notes the next time you’re working in the window, or use notes to keep other employees up to date about changing information.
Note button
Window-level notes can be attached to individual windows throughout the system. Window-level notes are typically used for instructions on what to do in a particular window. Notes can be edited and reattached, or deleted. If several people are entering information on the same note, you may want to identify each entry with a date and the user ID of the person entering the note. Window note buttons are located at a corner of a window.
Record notes
Record note buttons are located next to ID fields in a window.
Record notes apply to a specific card or transaction.
S Y S T E M U S E R ’ S G U I D E 53
Attachment button
OLE is an acronym for object linking and embedding. You can attach OLE objects—files such as pictures or spreadsheets—to any record-level notes that you enter in Microsoft Dynamics GP note windows. If you’re using other applications that support OLE, such as Microsoft Excel, you can attach any file created with that application to Microsoft Dynamics GP notes. When you open a note, you can choose an OLE button, which will open the OLE object you attached to a note.
Checklist windows
You can help ensure that the standard procedures your business performs on a routine basis are completed consistently by using the checklists window for each series. When you perform these routines using the Checklists window, the time and date each task was completed and the user ID of the user who completed it are recorded. You can use the checklists already set up in Microsoft Dynamics GP or customize them and add routines to fit your business’s needs.
For more information see Modifying a routine checklist in your System
Administrator’s Guide (Help >> Contents >> select System Administration).
54 S Y S T E M U S E R ’ S G U I D E
Chapter 8: User preferences
You can customize the way Microsoft Dynamics GP appears on your workstation according to your individual preferences. The user preferences you select will be applied to all the companies you have access to.
This information is organized into the following sections:
•
•
•
•
Modifying AutoComplete options
•
•
Modifying Workflow alert settings
•
Customizing user preferences
Use the User Preferences window to modify your individual preferences. These preferences are saved on a per user basis.
To customize user preferences:
1.
Be sure the current user ID is the one that you want to set preferences for.
2.
Open the User Preferences window.
(Microsoft Dynamics GP menu >> User Preferences)
3.
Mark the Horizontal Scroll Arrows option to display scroll arrows for some fields.
Marking this option will allow you to use scroll arrows on either side of the field to view the entire account number.
4.
Mark Printer, Screen, or both to set default report destinations.
5.
Mark Tab or Return to select the entry key used for moving the highlight from field to field. If you select Return, you’ll press the
ENTER
key to move from field to field and
SHIFT
+
ENTER
to save or process information on a window.
S Y S T E M U S E R ’ S G U I D E 55
6.
If you use Sales Order Processing, select the default sales document type that appears in the Sales Transaction Entry window.
7.
Choose Local or Remote to determine where you want designated process to be performed. Refer to your System Administrator’s Guide (Help >> Contents >> select System Administration) for more information.
8.
Choose an option to specify Microsoft MapPoint
®
mapping settings.
9.
Choose Reminders, Display, Password or AutoComplete to continue modifying your preferences, or choose OK to close the window and save your changes. See
Modifying AutoComplete options
on page 57 for more information.
Changing your display
Use the User Display Preferences window to change how Microsoft Dynamics GP looks on your computer. You can select the colors and styles for links, required and editable fields that appear in Microsoft Dynamics GP windows. For information
about changing the navigation pane, see Chapter 3, “Navigation.”
For information about changing menus and toolbars see
Chapter 2, “Using Microsoft Dynamics GP.”
If you have impaired vision, you can use the Accessibility Wizard available with your operating system to select a high contrast color scheme which removes color gradients from the user interface. You also can use the Display Properties window available with your operating system to specify additional color settings that might improve visibility of the user interface.
Since many fields in Microsoft Dynamics GP are editable, be sure to choose a combination of
colors and patterns that is easy to look at for long periods of time.
To change your display:
1.
Open the User Display Preferences window.
(Microsoft Dynamics GP menu >> User Preferences >> Display button)
2.
In the Link Fields group, specify how you want links to look.
56 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 8 U S E R P R E F E R E N C E S
3.
In the Required Fields group, specify how you want required fields to look.
You can display field names in a specific color and style by selecting the Show
Required Fields option on the Help menu.
4.
Choose Apply and use the Preview window to view your selections.
5.
When you’ve finished making changes, choose OK to close the window and save your changes. Choose OK to close the User Preferences window.
Changing your user password
Use the User Password Setup window to enter or modify the password that gives you access to Microsoft Dynamics GP. Each user must have a password to access
Microsoft Dynamics GP. This password is assigned using the User Setup window.
Change your password frequently to help ensure system security. Passwords must be at least five characters; however, your system administrator might have other requirements.
To change your user password:
1.
Open the User Password Setup window.
(Microsoft Dynamics GP menu >> User Preferences >> Password)
2.
In the Old Password field, enter your current password.
3.
In the New Password field, enter your new password.
4.
Reenter your new password exactly as you previously entered it.
5.
Choose OK.
Microsoft Dynamics GP will verify the password, and if the password was entered correctly, the User Preferences window appears. If the password was not typed the same way in both steps 3 and 4, a message will be displayed, and you’ll need to enter the new password again.
The new password will be required the next time you log in to Microsoft
Dynamics GP.
Modifying AutoComplete options
Use the AutoComplete Setup window to specify the number of days before unused entries should be removed and the number of entries that can be saved for each field. You also can remove all existing AutoComplete entries. Separate sets of
AutoComplete entries are saved for each user and each company. If you decide not to use AutoComplete, unmark the Show AutoComplete Suggestions option.
S Y S T E M U S E R ’ S G U I D E 57
By using AutoComplete, previous entries that you’ve made for some editable fields, such as Customer ID, Vendor ID, and Address ID, are saved. Then, when you begin typing information in one of these fields, possible matches are suggested in a list. If a suggestion in the list matches your criteria for that field, select the suggestion. You can select the << More >> option in the list to open the lookup window related to the field.
To modify AutoComplete suggestions:
1.
Open the AutoComplete Setup window.
(Microsoft Dynamics GP menu >> User Preferences >> AutoComplete)
2.
Enter the number of days that entries can go unused before being removed. If the number of days is zero, unused entries won’t be removed.
3.
Enter the number of entries that will be saved for each field.
4.
Choose the Remove Entries button to remove all previously saved entries.
5.
When you’ve finished making changes, choose OK to close the window. Choose
OK to close the User Preferences window and to save your changes in the
AutoComplete Setup window.
The changes you made in the AutoComplete Setup window will take effect the next time you start Microsoft Dynamics GP.
Modifying the user date
The user date is the date that’s displayed on the status bar. The default date is the operating system date, but you can modify this date in two ways:
• Change the operating system date. See your operating system documentation for information about how to change the operating system date.
• Change the user date.
To modify the user date:
1.
Open the User Date window.
(Microsoft Dynamics GP menu >> User Date)
2.
In the date field, enter the new date and choose OK. The user date changes to the date that you entered.
58 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 8 U S E R P R E F E R E N C E S
Modifying Workflow alert settings
You can modify Workflow alert settings on the Workflow Alerts page of the
Workflow Web site. For more information about Workflow, refer to
To modify Workflow alert settings:
1.
Open the User Preferences window.
(Microsoft Dynamics GP menu >> User Preferences)
2.
Choose Workflow Alerts. The Workflow Web site opens and the Workflow
Alerts page is displayed.
3.
Select a company from the Current Company list in the upper right corner of the page.
4.
Choose a workflow to configure your alert settings for. The Workflow User
Alerts page is displayed.
5.
Select the Receive a Microsoft Dynamics Desktop Alert check box to receive desktop alert messages when tasks are assigned to you, or when documents or batches you’ve submitted have completed workflow approval processes.
6.
To receive e-mail alert messages, select one of the following options:
Receive an immediate e-mail
Select this option to receive e-mail messages immediately after workflow tasks have been assigned to you, or when documents or batches you’ve submitted have completed workflow approval processes.
Keep in mind, this means you will receive one e-mail message for each task assigned to you, and one e-mail message for each document, master record, or batch you submitted.
Receive a daily e-mail summary
Select this option to receive a daily email message. Specify what time you want the daily e-mail message sent. Then indicate if the message should list all tasks assigned to you, or only new tasks— that is, those tasks assigned to you since the last daily e-mail message was sent.
Receive a weekly e-mail summary
Select this option to receive a weekly e-mail message. Specify the day and time you want the weekly e-mail message sent. Then indicate if the message should list all tasks assigned to you, or only new tasks—that is, those tasks assigned to you since the last weekly e-mail message was sent.
7.
Click OK.
8.
Repeat this procedure for each company you log in to.
S Y S T E M U S E R ’ S G U I D E 59
Delegating Workflow tasks
You can delegate, or reassign your tasks to another approver in the workflow. For example, suppose Sue will be on vacation for a couple of weeks. She can delegate her tasks to Frank or Ann.
Sam
submits a purchase order.
1.
Frank
Must approve if greater than
$1,000.
2.
Sue
Must approve if greater than
$5,000.
3.
Ann
Must approve if greater than
$10,000.
For more information about Workflow, refer to
To delegate Workflow tasks:
1.
Open the User Preferences window.
(Microsoft Dynamics GP menu >> User Preferences)
2.
Choose Workflow Delegation. The Workflow Web site opens and the Workflow
User Delegation page is displayed.
3.
Select a company from the Current Company list in the upper right corner of the page.
4.
If you want to delegate all of your tasks, select the Select all my workflows check box.
If you want to delegate only the tasks for a particular type of workflow, select the workflow type.
5.
For each workflow type that you selected, specify who you want your tasks delegated to.
6.
For each workflow type that you selected, specify when your tasks should be delegated by entering a start and end date.
7.
Choose OK.
8.
Repeat this procedure for each company you log in to.
60 S Y S T E M U S E R ’ S G U I D E
Chapter 9: Shortcut navigation
This information describes how to create shortcuts, and how to organize and modify shortcuts. You can create shortcuts to the windows, macros, applications, and Web sites that you frequently use while working in Microsoft Dynamics GP.
You’ll access your shortcuts from the shortcut bar, located in the navigation pane.
This information is divided into the following sections:
•
•
•
•
Creating shortcuts to Microsoft Dynamics GP windows
•
Creating shortcuts to SmartList favorites
•
•
Creating shortcuts to web pages
•
•
•
Creating a new shortcut folder
•
Creating custom keyboard shortcuts
•
Deleting shortcuts and folders
Shortcuts overview
Shortcuts are displayed in the upper part of the navigation pane when your Home
Page is displayed. If the navigation pane is not visible, choose the Layout menu and select Navigation Pane. Choose the Home navigation pane button to display your shortcuts and your home page.
Use shortcuts to quickly open frequently used windows and resources within
Microsoft Dynamics GP. For example, if you regularly access a small subset of windows in your daily tasks, you can create shortcuts to those windows and store them in one folder. You can do the same with windows that you use less frequently, such as those used for month-end closing procedures.
The default set of shortcuts contain a Startup folder. Shortcuts that you move into this folder will start automatically when you log in to a company in Microsoft
Dynamics GP.
Shortcuts also may include a User Classes folder. The User Classes folder is created for you by the system administrator and contains shortcuts to specific tasks and windows. The system administrator can modify and delete a User Classes folder or any other shortcuts within the folder.
The following table explains shortcut options that are available.
Option Action
Open a shortcut
Open a shortcut in a folder
Click the shortcut to open.
Click a folder name to expand its contents and click the shortcut to open.
Add a new shortcut folder Right-click anywhere in the list of shortcuts and choose Add >>
Folder.
Move a shortcut into a folder Select the shortcut and drag it into a shortcut folder.
Delete a shortcut or folder Right-Click the shortcut or folder and choose Delete.
S Y S T E M U S E R ’ S G U I D E 61
Option
Rename a shortcut
Action
Right-click the shortcut or folder and choose Rename.
Default shortcuts
Default shortcuts are available to each new user created in Microsoft Dynamics GP.
Select the default shortcuts for more information about using Microsoft Dynamics
GP and to set up your user preferences.
You can delete, move, or rename any of the following default shortcuts:
User Preferences
Choose this shortcut to open the User Preferences window, where you can customize the way Microsoft Dynamics GP appears on your workstation, change your user password, and set other options.
Shortcuts
Select the folder icon to expand this folder, which contains a shortcut to the CustomerSource Web site, where you can learn about available support options. The CustomerSource Web site requires login credentials.
Startup
Organize shortcuts to specific windows to open and applications to start whenever you open a company in Microsoft Dynamics GP.
Creating shortcuts
Shortcuts allow you to quickly navigate within Microsoft Dynamics GP. You can create shortcuts to the following items:
• Microsoft Dynamics GP windows
• SmartList favorites
• Microsoft Dynamics GP macros
• Internet web pages
• Other applications in your system
You can’t create two shortcuts with the same name at the same level in the list of shortcuts. If an existing shortcut has the same name as the one you’re creating, the shortcut will appear with a number after the name.
Creating shortcuts to Microsoft Dynamics GP windows
The most common type of shortcut you’ll create is a shortcut to a window within
Microsoft Dynamics GP. You also can add shortcuts of multiple Microsoft Dynamics
GP windows at one time to group them in a shortcut folder.
To create a shortcut to the current Microsoft Dynamics
GP window:
1.
Open the window to add a shortcut for.
2.
Choose File >> Add to Shortcuts.
62 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 9 S H O R T C U T N A V I G A T I O N
To create shortcuts to several Microsoft Dynamics GP windows:
1.
Right-click anywhere in the list of shortcuts and choose Add >> Add Window.
2.
The Add Window Shortcut window appears.
3.
Enter a name for the shortcut in the Name field. The name can be up to 79 characters long.
4.
From the Available Windows list, locate and select a window to create a shortcut for.
5.
Choose Add to create a shortcut to the window.
6.
To create additional shortcuts, repeat steps 3 through 5 for each window to create a shortcut for.
7.
Choose Done to close the Add Window Shortcut window.
Creating shortcuts to SmartList favorites
You can quickly access the information stored in your Microsoft Dynamics GP data that you regularly refer to by adding shortcuts to SmartList favorites. For more information about SmartList, see
To create a shortcut to a SmartList favorite:
1.
Right-click anywhere in the list of shortcuts and choose Add >> Add SmartList.
S Y S T E M U S E R ’ S G U I D E 63
2.
The Add SmartList Favorite Shortcut window appears.
3.
From the list of available SmartList Favorites, locate and select the favorite to create a shortcut for. The favorite will appear in the SmartList favorite field.
4.
Accept or enter the name for the SmartList favorite in the Name field. The name can be up to 79 characters long.
5.
Choose Add to create a shortcut to the favorite.
6.
To create additional SmartList favorite shortcuts, repeat steps 3 through 5 for each SmartList favorite to create a shortcut for.
7.
Choose Done to close the Add SmartList Favorite Shortcut window.
Creating shortcuts to macros
By creating shortcuts to macros that you frequently use, you can start the macros from the main Microsoft Dynamics GP window. For more information about
macros, see Chapter 19, “Macros.”
To create a shortcut to a macro:
1.
Right-click anywhere in the list of shortcuts and choose Add >> Add Macro.
2.
The Add Macro Shortcut window appears.
3.
Enter a name for the macro. The name can be up to 79 characters long.
4.
Choose Browse to locate the macro to add. The Select a Macro window appears.
After you locate and select the macro, choose Open to add it to the Macro file field in the Add Macro Shortcut window.
5.
Choose Add to create a shortcut to the macro.
64 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 9 S H O R T C U T N A V I G A T I O N
6.
To create additional macro shortcuts, repeat steps 3 through 5 for each macro to create a shortcut for.
7.
Choose Done to close the Add Macro Shortcut window.
Creating shortcuts to web pages
If you regularly refer to web pages or web sites to complete your Microsoft
Dynamics GP tasks, you can add shortcuts to those pages and access them quickly without having to enter the address in your web browser application.
To create a shortcut to a web page:
1.
Right-click anywhere in the list of shortcuts and choose Add >> Add Web Page.
2.
The Add Web Page Shortcut window appears.
3.
Enter a name for the web page in the Name field. The name can be up to 79 characters long.
4.
Enter the web page address in the Address field.
To verify the address that you entered, choose the Test button. Your default web browser will start and attempt to open the web page.
5.
Choose Add to create a shortcut to the web page.
6.
Repeat steps 3 through 5 for each web page to create a shortcut for.
7.
Choose Done to close the Add Web Page Shortcut window.
Creating external shortcuts
You can create shortcuts to external tasks by using the Add External Shortcut window.
S Y S T E M U S E R ’ S G U I D E 65
To create an external shortcut:
1.
Right-click anywhere in the list of shortcuts and choose Add >> Add External
Shortcut.
2.
The Add External Shortcut window appears.
3.
Enter a name for the application or file in the Name field.
4.
Choose the Browse button to locate the external application or file to add. The
Select an Application window appears.
5.
Select a program or file. Choose Open to add its path to the Command Line field in the Add External Shortcut window.
6.
Choose Add to create a shortcut to the file.
7.
Repeat steps 3 through 6 for each external shortcut you want to create.
8.
Choose Done to close the Add External Shortcut window.
Renaming shortcuts
After you’ve created a shortcut, you can modify its name. To rename a shortcut, complete one of the following actions.
• Right-click on the shortcut or folder and choose Rename.
• Right-click on the shortcut and choose Shortcut Properties. Type a new name in the Shortcut Properties window.
Creating a new shortcut folder
You can organize shortcuts by grouping them into folders on the shortcut bar. For example, you may want to group shortcuts for a series of tasks in the same folder, or put shortcuts for the same type of files in one folder.
To create a new shortcut folder:
1.
Right-click anywhere in the list of shortcuts and choose Add >> Folder.
2.
A folder will appear with the default name New Folder.
3.
Enter a name for the folder.
You can’t create two folders with the same name at the same level of the shortcut bar. If an existing folder has the same name as the one you want to create, the folder will appear with a number after the name.
66 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 9 S H O R T C U T N A V I G A T I O N
Creating custom keyboard shortcuts
You can apply a series of keystrokes to activate a shortcut using the keyboard. You’ll choose from a list of available keyboard shortcuts to assign the keystrokes. Any keys used for keyboard commands by the operating system, the main Microsoft
Dynamics GP menus, or other shortcuts won’t be available to use for custom keyboard shortcuts.
To create a custom keyboard shortcut:
1.
In the list of shortcuts, right-click on the shortcut to assign a keyboard shortcut to and choose Shortcut Properties. The Shortcut Properties window opens.
2.
Choose a keyboard shortcut from the available keystrokes in the Keyboard
Shortcut drop-down list.
3.
Choose OK.
Deleting shortcuts and folders
To delete a shortcut or folder, right-click the shortcut or folder and choose Delete.
If you delete a folder, all the shortcuts and subfolders contained within it also will be deleted.
S Y S T E M U S E R ’ S G U I D E 67
68 S Y S T E M U S E R ’ S G U I D E
Chapter 10: Keyboard shortcuts
Microsoft Dynamics GP has a standard interface to provide a consistent look and feel. You can use the keyboard shortcuts to move around in Microsoft Dynamics GP.
This information is divided into the following sections:
•
Menu bar and toolbar keyboard shortcuts
•
Microsoft Dynamics GP application window keyboard shortcuts
•
Window navigation keyboard shortcuts
•
•
Window-specific keyboard shortcuts
•
Other common keyboard shortcuts
Menu bar and toolbar keyboard shortcuts
Use keyboard shortcuts to select commands from Microsoft Dynamics GP menus and toolbars. The shortcut letter is underlined on the menu or toolbar when you press
ALT
. To access a menu using keyboard shortcuts, press
ALT
and the underlined letter of the menu that you want to access. For example, press
ALT
, A to display the
Transactions menu and press
ALT
, F to display the File menu. To select a command from a menu by using the keyboard, press
ALT
and the underlined letter of the menu that you want to access, then select the underlined letter in the command name. For example, to open the Transaction Entry window, press
ALT
, A, F, G.
If you complete most of your tasks using the keyboard only, be sure to display the main toolbar in the Microsoft Dynamics GP application window so that you can access common
windows using keyboard shortcuts. For more information about toolbars, see Toolbars on page 17.
Microsoft Dynamics GP application window keyboard shortcuts
Use the following shortcut keys to navigate quickly within the Microsoft Dynamics
GP application window.
Navigation Keyboard shortcut
Address Bar
Search box
Toolbars
Move to next toolbar command
ALT
ALT
ALT
+
D
+
S
CTRL
+
TAB
Move to previous toolbar command
Home
CTRL
+
SHIFT
+
TAB
Second through ninth navigation pane button
CTRL
+ 1
CTRL
+ number of navigation pane button. For example, press
CTRL
+ 2 to activate the second navigation pane button.
Forward and Back buttons
ALT
+
RIGHT OR LEFT ARROW
S Y S T E M U S E R ’ S G U I D E 69
Window navigation keyboard shortcuts
Use the following shortcut keys to navigate quickly within a window.
Navigation
Move to next field
Move to previous field
Move from scrolling window to next field
Move from scrolling window to previous field
Default button on a window
Close the current window
Exit application
Keyboard shortcut
TAB
SHIFT
+
TAB
CTRL
+
TAB
SHIFT
+
CTRL
+
TAB
ENTER
CTRL
+
W
ALT
+
X
Tools keyboard shortcuts
Use these keyboard commands to activate the following Microsoft Dynamics GP tools.
Tool
Report Writer
Modify Current Report
Modifier
Modify Current Window
Record a Macro
Play a Macro
Keyboard shortcut
ALT
+
F
9
CTRL
+
F
9
ALT
+
F
10
CTRL
+
F
10
ALT
+
F
8
CTRL
+
F
8
70 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 0 K E Y B O A R D S H O R T C U T S
Window-specific keyboard shortcuts
Use the following shortcut keys to open the windows listed below.
Window Keyboard shortcut
Assembly Entry — Decrease Level
Assembly Entry — Increase Level
CTRL
CTRL
+
D
+
I
Edit Payables Checks — Create Temporary Vendor
CTRL
+
T
Edit Purchase Order Status— Display Vendor Item Detail
CTRL
+
D
Payables Manual Payment Entry — Create Temporary
Vendor
CTRL
+
T
Payables Transaction Entry — Create Temporary Vendor
CTRL
+
T
Purchase Order Entry — Create Temporary Vendor
CTRL
+
T
Purchase Order Entry — Display Vendor Item Detail
Purchase Order Entry — Open Item Detail
CTRL
CTRL
+
D
+
E
Purchase Order Inquiry Zoom — Display Vendor Item
Detail
Purchase Order Inquiry Zoom — Open Item Detail
CTRL
+
D
CTRL
+
E
Purchase Order Processing Item Inquiry — Display Vendor
Item Detail
CTRL
+
D
CTRL
+
D
CTRL
+
E
CTRL
+
M
Purchasing Invoice Entry — Display Vendor Item Detail
Purchasing Invoice Entry — Open Item Detail
Purchasing Invoice Entry — Open Match Shipments to
Invoice
Purchasing Invoice Inquiry Zoom— Display Vendor Item
Detail
Purchasing Item Detail Entry — Display Vendor Item
Detail
Purchasing Item Detail Inquiry Zoom — Display Vendor
Item Detail
Purchasing Item Receipts Zoom — Display Vendor Item
Detail
Purchasing Vendor Detail Entry — Create Temporary
Vendor
CTRL
CTRL
CTRL
CTRL
CTRL
+
D
+
D
+
D
+
D
+
T
Receivings Item Detail Entry — Display Vendor Item Detail
CTRL
+
D
Receivings Transaction Entry — Create Temporary Vendor
CTRL
+ T
Receivings Transaction Entry — Display Vendor Item
Detail
CTRL
+
D
Receivings Transaction Entry — Open Item Detail
CTRL
+
E
Receivings Transaction Inquiry Zoom — Open Item Detail
CTRL
+
E
Receivings Transaction Inquiry Zoom— Display Vendor
Item Detail
CTRL
+
D
Sales Transaction Entry — Open Item Detail
Sales Transaction Entry— Quick Print
CTRL
+
E
CTRL
+
Q
Select Purchase Order Items — Display Vendor Item Detail
CTRL
+
D
Vendor Account Maintenance — Open Additional Vendor
Accounts
CTRL
+
E
S Y S T E M U S E R ’ S G U I D E 71
Other common keyboard shortcuts
You can use the following shortcut keys instead of choosing command buttons in
Microsoft Dynamics GP windows.
Command
Copy
Paste
Select All
View Functional Currency
View Originating Currency
View Reporting Currency
Account Alias
Analysis
Keyboard shortcut
CTRL
+
C
CTRL
+
V
CTRL
+
P
CTRL
+
A
CTRL
+
U
CTRL
+
O
CTRL
+
R
CTRL
+
Q
CTRL
+
Y
72 S Y S T E M U S E R ’ S G U I D E
Part 2: Microsoft software integration
This part of the documentation contains information about other Microsoft software that integrates with Microsoft Dynamics GP.
The following information is discussed:
•
provides an overview of the Workflow feature.
•
Chapter 12, “Letter Writing Assistant,” provides an overview of the Letter
Writing Assistant.
•
Chapter 13, “MapPoint integration,”
provides information on how to use
Microsoft MapPoint within Microsoft Dynamics GP.
•
Chapter 14, “Unified Communications,” provides information on how to use
Unified Communications with Microsoft Dynamics GP.
74 S Y S T E M U S E R ’ S G U I D E
Chapter 11: Workflow
You can use the Workflow feature in Microsoft Dynamics GP to create approval processes. Workflow can help you manage the tasks that you need to complete for your business. You can set up Workflow to automate certain processes, or to require approvals before certain processes can proceed. Refer to the Workflow
Administrator’s Guide and the System Setup Guide for more information about setting up Workflow.
This information is divided into the following sections.
•
•
•
Accessing Workflow in Microsoft Dynamics GP
•
•
Workflow overview
Workflow is a feature of Microsoft Dynamics GP that you can use to create individual workflows, or approval processes. Each workflow defines how a document, master record, or batch “flows” through the system by showing who must approve it, and the conditions under which they must approve it.
For example, consider the following illustration of a purchase order approval workflow. This workflow shows who must approve purchase orders, and the conditions under which their approval is required. For example, suppose Sam submits a purchase order for $2,000. In this scenario, the purchase order must be approved by Frank. If Sam submits a purchase order for $8,000, it must be approved by both Frank and Sue.
Sam
submits a purchase order.
1.
Frank
Must approve if greater than
$1,000.
2.
Sue
Must approve if greater than
$5,000.
3.
Ann
Must approve if greater than
$10,000.
The workflow approval process expands existing workflow functionality provided in both Microsoft Dynamics GP and SharePoint. This feature provides a consistent, comprehensive solution to the approval of documents, credit limit overrides, master records, and batch posting for payables, receivables and general ledger transactions.
Integration with SharePoint helps to ensure an efficient, centralized administration point, and allows the use of user roles to help you efficiently manage security of the approval process. The Workflow feature allows users to approve business processes, even if they’re not Microsoft Dynamics GP users.
S Y S T E M U S E R ’ S G U I D E 75
P A R T 2 M I C R O S O F T S O F T W A R E I N T E G R A T I O N
The Workflow feature allows you to have multiple approvers for a business task; multiple levels of approvals, depending on user-defined rules; and automatically delegate approval tasks for instances where the person who normally approves a task is unavailable.
Notification of pending approvals—and the actual approval steps—can be accomplished using Microsoft Outlook e-mail messages or SharePoint.
There are several types of workflows you can create:
• Purchase order approval
• Sales quote approval
• Credit limit override approval
• Vendor approval
• General Ledger batch approval
• Payables Management batch approval
• Receivables Management batch approval
• Employee onboard approval
• Personnel maintenance approval
• Electronic signatures
Benefits of using Workflow
There are several benefits of using Workflow in your organization.
Consistent processes
The Workflow system enables you to define the approval process for master records, specific documents, and batches, such as purchase order documents and Receivables Management batches. By using the
Workflow system, you ensure that documents, master records, and batches are reviewed and approved in a consistent and efficient manner.
Automatic notification
Users can be automatically notified when a document, master record, or batch is assigned to them for approval, or when a document, master record, or batch they submitted is approved. Users can be notified by desktop alerts or e-mail alerts.
Access through SharePoint and Microsoft Outlook
Users don’t have to log in to Microsoft Dynamics GP to approve documents, master records, and batches. Users can approve documents, master records, and batches by accessing the Workflow web site using SharePoint, or by responding to e-mail messages in
Microsoft Outlook.
Reports
There are several Workflow reports that you can generate. These reports help you monitor the Workflow system and identify specific workflow steps or approvers who may be slowing down an approval process.
Accessing Workflow in Microsoft Dynamics GP
You can access workflow from the action pane, when you open a list for a workflow that you created, such as the purchase order approval workflow.
76 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 1 W O R K F L O W
To access Workflow in Microsoft Dynamics GP:
1.
In the navigation pane, select the module for the type of workflow you want to use.
2.
Select the type of transaction, and select <workflow type> pending approval.
3.
In the content pane, select a document from the list.
4.
In the action pane, choose the Approve/Completed workflow button, or right– click on the arrow next to the approve /completed button and select an option
(Reject, Delegate, Request Change, or Submit). Depending on which button you choose, an action will occur or a window will open for you to specify any additional information that is needed. The document will proceed to the next step in the workflow process.
Example
To approve a document using the purchase order approval workflow, select
Purchasing >> Purchase Order Transactions >> Purchase Orders Pending Approval in the navigation pane. In the content pane, select a document from the list and choose the Approve button in the action pane. The document that you selected will be marked as approved and will proceed to the next step in the workflow process.
Viewing a list of your tasks
You can view a list of tasks that have been assigned to you by accessing the Tasks page on the Workflow Web site. A task represents a document, master record, or batch assigned to you for approval. To view the tasks assigned to you, follow the steps below.
To view a list of your tasks:
1.
Go to the Workflow web site.
2.
Click Tasks on the Quick Launch. The Workflow Tasks page appears.
3.
Click a workflow type. The <Workflow Type> Tasks page appears. By default, the tasks assigned to you for this workflow type are displayed.
4.
Use the View menu, on the right side of the page, to display additional tasks on this page. For example, you can display all tasks for this workflow type, or tasks that are due today.
Acting on a task
You can approve, complete, reject, delegate, or a request a change to a workflow task from the Tasks page on the Workflow Web site.
To act on a task:
1.
Go to the Workflow Web site.
2.
Click Tasks on the Quick Launch. The Workflow Tasks page appears.
3.
Click a workflow type. The <Workflow Type> Tasks page appears. By default, the tasks assigned to you for this workflow type are displayed.
S Y S T E M U S E R ’ S G U I D E 77
P A R T 2 M I C R O S O F T S O F T W A R E I N T E G R A T I O N
4.
Click a task.
5.
Enter any comments you have about the document, master record, or batch.
6.
Click one of the following buttons:
Approve
Click this button to approve the document, master record, or batch.
The document, master record, or batch will be assigned to the next approver in the workflow, if necessary. If no additional approval is required, the document, master record, or batch is given the status of Approved and the workflow process is complete.
Completed
Click this button to complete a task for the document, master record, or batch. The document, master record, or batch will be assigned to the next approver in the workflow, if necessary. If no additional approval is required, the document, master record, or batch is completed and the workflow process is complete.
Reject
Click this button to reject the document, master record, or batch. The document, master record, or batch is given the status of Rejected and the workflow process is complete.
Delegate
Click this button to assign the task to another approver in the workflow. Then select which approver you want the task assigned to.
Request Change
Click this button to request a change to the document, master record, or batch. The document, master record, or batch is given the status of Pending Changes and the workflow process is complete.
Cancel
No action is taken on the document, master record, or batch. The previous page is displayed.
78 S Y S T E M U S E R ’ S G U I D E
Chapter 12: Letter Writing Assistant
Use the Letter Writing Assistant to create letters in Microsoft Word. Information about using the Letter Writing Assistant is organized into the following sections:
•
Overview of the Letter Writing Assistant
•
•
•
•
•
Overview of the Letter Writing Assistant
You can use the Letter Writing Assistant to create letters in Word that you can send to customers, vendors, applicants, or employees using Microsoft Dynamics GP data and Word document templates. Examples include collection letters, credit application acceptance letters, proposal cover letters, letters to dispute charges, applicant offers, benefit summaries, and employee memos.
You can use prewritten, preformatted letter templates or create your own. Start the
Letter Writing Assistant by choosing the Write Letters button in the Customer
Maintenance, Customer Summary, Vendor Maintenance, Vendor Credit Summary,
Applicant, Applicant Offer, Employee Maintenance, Employee Summary, and
SmartList windows or choose Reports >> Letter Writing Assistant. Letter templates are stored in the Letters folder, which is within the Data folder in the location where your Microsoft Dynamics GP is installed. Any changes you make to existing templates, or any new templates you create, are stored only on the local computer.
You might encounter some errors while using the Letter Writing Assistant if you have the security setting for macros in Word set at medium or high. Refer to your Word documentation for more information about security settings in Word.
If you’re using Human Resources or Payroll, you need to set security to letters that display personal information. Use the Security Task Setup window (Microsoft
Dynamics GP menu >> Tools >> Setup >> System >> Security Tasks) and the
Security Role Setup window (Microsoft Dynamics GP menu >> Tools >> Setup >>
System >> Security Roles) to grant security to Human Resources or Payroll letters.
Preparing a letter
Use the Letter Writing Assistant to prepare Word mail merge letters to customers, vendors, applicants, or employees.
To prepare a letter:
1.
Open the Letter Writing Assistant.
(Reports >> Letter Writing Assistant)
2.
A welcome message will be displayed. Choose Next to continue.
3.
Select the Prepare the letters using an existing letter option and choose Next to continue.
4.
Select a collection, customer, vendor, applicant, or employee letter to prepare.
Choose Next to continue.
S Y S T E M U S E R ’ S G U I D E 79
M I C R O S O F T S O F T W A R E I N T E G R A T I O N
5.
Select the recipients to send the letter to. Depending on your selection in step 4, you can select All Customers, All Vendors, All Applicants, or All Employees.
You also can select a range of IDs or names, or select recipients from SmartList.
You can clear selected recipients later in this procedure.
6.
Depending on your selection in step 5, complete one of the following actions.
• If you selected SmartList Selection, choose a favorite from the tree view.
Then skip to step 9.
• If you selected a range of IDs or names, enter beginning and ending IDs or names, then continue to step 7.
• If you selected All Customers, All Vendors, All Applicants, or All
Employees continue to step 7.
7.
Select the type of recipients to include: Active, Inactive, or All.
8.
If you are preparing a collection letter, select one or more customer balance categories. Choose Next to continue.
9.
Select the template to use for the letter. Choose Next to continue.
10. Clear recipients who shouldn’t receive a letter. Choose Mark All to select all recipients. Choose Unmark All to clear all recipients. Choose Next to continue.
11. Enter your name, title, and contact information, or enter information for the person who is sending the letter.
12. Choose Finish. The letters will open as a mail merge document in Word, where you can modify and print the letters.
Creating a letter template
Use the Letter Writing Assistant and Word to create a new letter template that can include company, customer, vendor, applicant, or employee address information, and also customer balance and invoice detail information from Microsoft Dynamics
GP.
To create a letter template:
1.
Open the Letter Writing Assistant.
(Reports >> Letter Writing Assistant)
2.
A welcome message will be displayed. Choose Next to continue.
3.
Mark the Customize the letters by adding new letters or changing existing letters option. Choose Next to continue.
4.
Select the letter category for the letter template that you’re creating.
5.
Select the Create a New Letter option.
6.
Select whether to start with a blank document or with an existing Word document.
80 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 2 L E T T E R W R I T I N G A S S I S T A N T
7.
Choose Next to continue. A window will open. Depending on what you select, complete one of the following actions.
• If you selected to start with a blank document, enter the name to use for the template and choose OK.
• If you selected to start with an existing Word document, enter or select the path and file name of the document to use and choose OK.
The blank or existing Word document will open in Word. A letter-writing toolbar that you can use to add Microsoft Dynamics GP data to the letter will open.
8.
Select the insertion point where you’d like data from Microsoft Dynamics GP to be placed in the letter, and then select the type of data to add to the letter using the letter-writing toolbar.
9.
Choose File >> Save to save the document as a new letter template.
When you’ve finished and you close Word, the Letter Writing Assistant will remain open in Microsoft Dynamics GP so that you can continue working with letter templates.
New templates and changes to existing templates are saved only on the machine they were made on.
10. Choose Cancel to close the Letter Writing Assistant.
Modifying a letter template
Use the Letter Writing Assistant and Word to modify a letter template. A template can include company, customer, vendor, applicant, or employee address information, and also customer balance and invoice detail information from
Microsoft Dynamics GP.
To modify a letter template:
1.
Open the Letter Writing Assistant.
(Reports >> Letter Writing Assistant)
2.
A welcome message will open. Choose Next to continue.
3.
Mark the Customize the letters by adding new letters or changing existing letters option. Choose Next to continue.
4.
Mark the Edit an Existing Letter option. Select the letter category for the letter template you’re modifying.
5.
Select the template to modify. Choose Next.
The letter will open in Word and a letter writing toolbar that you can use to add additional Microsoft Dynamics GP data to the letter will open.
6.
Select the insertion point where you’d like data from Microsoft Dynamics GP to be placed in the letter, and then select the type of data to add to the letter using the letter-writing toolbar.
S Y S T E M U S E R ’ S G U I D E 81
M I C R O S O F T S O F T W A R E I N T E G R A T I O N
7.
Choose File >> Save to save the document as a new letter template.
When you’ve finished and you close Word, the Letter Writing Assistant will remain open in Microsoft Dynamics GP so that you can continue working with letter templates.
8.
Choose Cancel to close the Letter Writing Assistant.
Deleting a letter template
Use the Letter Writing Assistant to delete a letter template.
To delete a letter template:
1.
Open the Letter Writing Assistant.
(Reports >> Letter Writing Assistant)
2.
A welcome message will be displayed. Choose Next to continue.
3.
Mark the Customize the letters by adding new letters or changing existing letters option. Choose Next to continue.
4.
Mark the Delete a Letter option. Select the letter category for the letter template you’re deleting.
5.
Select the template to delete.
6.
Choose Next to delete the letter template.
7.
Choose Cancel to close the Letter Writing Assistant or choose Back to continue using the wizard.
Renaming a letter template
Use the Letter Writing Assistant to rename a letter template.
To rename a letter template:
1.
Open the Letter Writing Assistant.
(Reports >> Letter Writing Assistant)
2.
A welcome message will be displayed. Choose Next to continue.
3.
Select the Customize the letters by adding new letters or changing existing letters option. Choose Next to continue.
4.
Select the Rename Existing Letter option. Select the letter category for the letter template you’re renaming.
5.
Select the letter template to rename. Choose Next to continue. A window will open.
6.
Enter the name for the letter template. Choose OK.
7.
Choose Cancel to close the Letter Writing Assistant or choose Back to continue using the wizard.
82 S Y S T E M U S E R ’ S G U I D E
Chapter 13: MapPoint integration
Use Microsoft MapPoint to display maps showing the locations of and driving directions to customer, vendor, and company addresses. Information about using
MapPoint is organized into the following sections:
•
•
Setting up MapPoint integration
•
Displaying a map showing a location
MapPoint overview
Because Microsoft Dynamics GP integrates with MapPoint, you can display maps showing the locations of and driving directions to customer, vendor, and company addresses. Driving directions and route-planning features are available only when you have MapPoint 2002 or later installed on a workstation.
Whenever you see the MapPoint button next to an address in a window, you can choose the button (shown below) to use MapPoint features.
Setting up MapPoint integration
You can use MapPoint integration to display a map showing the location of a customer, vendor, or your company, or to display driving directions to a customer or vendor location. You also can plan a route with several stops, such as at several customer or vendor locations. By default, MapPoint is active, but you can use the
User Preferences window to turn MapPoint integration on or off.
To set up MapPoint integration:
1.
Open the User Preferences window.
(Microsoft Dynamics GP menu >> User Preferences)
2.
In the Mapping field, select whether to use MapPoint installed on a workstation or MapPoint on the Internet.
3.
Choose OK to save the information and close the window.
Displaying a map showing a location
Use MapPoint installed on a workstation or Bing™ Maps to display a map showing the location of an address. You must have an active connection to the Internet to use
Bing Maps to display a map.
To display a map showing a location:
1.
In a window where a MapPoint button is displayed, select an address ID.
2.
Choose the MapPoint button to display a map.
3.
Depending on your setup, MapPoint or your web browser will start and will display a map showing the location of the address.
S Y S T E M U S E R ’ S G U I D E 83
84 S Y S T E M U S E R ’ S G U I D E
Chapter 14: Unified Communications
Microsoft Dynamics GP can integrate with some of the Unified Communications capabilities provided by Microsoft Office Communicator 2007 R2 or Microsoft Lync
2010. Presence information of your customers, sales people, vendors, and employees can be displayed from within Microsoft Dynamics GP. You also can select actions from Communicator or Lync to perform tasks within Microsoft
Dynamics GP such as creating a purchase order or opening the Customer
Maintenance window.
Information is divided into the following sections:
•
•
Communicator or Lync actions for Microsoft Dynamics GP
•
Communicator or Lync action for Business Analyzer
•
Presence overview
You can display the online presence of your customers, sales people, vendors, and employees from within Microsoft Dynamics GP. Presence information can be displayed for fields in maintenance, inquiry, and transaction entry windows. For example, the following Customer Maintenance window illustration shows presence information displayed for each contact assigned to an address ID.
S Y S T E M U S E R ’ S G U I D E 85
P A R T 2 M I C R O S O F T S O F T W A R E I N T E G R A T I O N
The Presence button is updated automatically with the status of your customer, salesperson, vendor, or employee. You can click the Presence button and select a task from the drop-down menu.
To display presence information, you must be signed in to your Communicator or
Lync account on the same computer as Microsoft Dynamics GP and have messenger addresses entered in the Internet Information window for your customers, sales people, vendors, and employees. You must start Communicator or Lync before you start Microsoft Dynamics GP.
If you don’t enter a messenger address, the Presence button isn’t display for your customers, sales people, vendors, and employees. If the messenger address is not a valid address, the presence of the customer, sales person, vendor, or customer is unknown. For information about entering a messenger address in the Internet
The messenger address must be in a contact group in your Communicator or Lync to display the current presence status of a customer, salesperson, vendor, or employee. For example, if the messenger address for a salesperson is not in a contact group, the presence of the salesperson is unknown. If the presence is unknown, you can click the Presence button and select to add the salesperson to a contact group.
Communicator or Lync actions for Microsoft
Dynamics GP
You can select actions from Communicator or Lync to perform tasks within
Microsoft Dynamics GP. To display the actions in Communicator or Lync, you must start Communicator or Lync, sign in to your Communicator or Lync account on the same computer as Microsoft Dynamics GP, and have messenger addresses entered in the Internet Information window for your customers, sales people, vendors, and employees.
If you have installed Microsoft Dynamics GP while you were signed in to Communicator or
Lync, be sure to sign out of and sign in to Communicator or Lync so you can select actions in Communicator or Lync.
86 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 4 U N I F I E D C O M M U N I C A T I O N S
In the Office Communicator window or the Microsoft Lync window, you can right-click on a contact name to display a list of actions. If you are particpating in an instant message conversation, you also can right-click on a contact name in the conversation window to display a list of actions.
Depending on the action you select, the appropriate window opens, displaying the document type and the customer ID or vendor ID that the messenger address is assigned to in the Internet Information window.
If you select an action for a contact that isn’t associated with a customer or vendor in Microsoft Dynamics GP, the appropriate window opens, but the customer ID or vendor ID is blank. If a messenger address is assigned to multiple customers and vendors, or to both a customer and a vendor, a window opens, where you can select which customer or vendor to perform a task for.
The following is a list of actions associated with Microsoft Dynamics GP windows.
Action Window that opens
Create a Sales Quote
Create a Sales Order
Create a Sales Invoice
Create a Purchase Order
View a Customer/Vendor Maintenance*
Sales Transaction Entry
Sales Transaction Entry
Sales Transaction Entry
Purchase Order Entry
Customer Maintenance
Vendor Maintenance
Customer Inquiry*
Vendor Inquiry*
*The inquiry window opens if you don’t have access to the maintenance window.
Communicator or Lync action for Business Analyzer
You can select an action from Communicator or Lync to add contacts to reports displayed in Business Analyzer or to remove contacts from reports. To display the action in Communicator, you must start Communicator or Lync, sign in to your
Communicator or Lync account on the same computer as Microsoft Dynamics GP, and have messenger addresses entered in the Internet Information window for your customers, sales people, vendors, and employees.
S Y S T E M U S E R ’ S G U I D E 87
P A R T 2 M I C R O S O F T S O F T W A R E I N T E G R A T I O N
In the Office Communicator window or the Microsoft Lync window, you can right-click on a contact name or group name to display a list of actions. If you are particpating in an instant message conversation, you also can right-click on a contact name in the conversation window to display a list of actions.
If you have installed Microsoft Dynamics GP while you were signed in to Communicator or
Lync, be sure to sign out of and sign in to Communicator or Lync so you can select actions in Communicator or Lync.
You can select the Manage Business Analyzer Contacts action to open the Manage
Unified Communication/Reports Assignments window.
In the Manage Unified Communication/Reports Assignments window, you can add contacts to reports or remove contacts from reports. For information about the
Manage Unified Communication/Reports Assignments window, refer to
Entering messenger addresses
Messenger addresses must be entered in the Internet Information window for your customers, sales people, vendors, and employees to display presence information in
Microsoft Dynamics GP and to display actions associated with Microsoft Dynamics
GP tasks in Communicator or Lync. A messenger address is the SIP (Session
Initiation Protocol) address. SIP addresses are used to create multimedia connections over Internet Protocol for applications like instant messaging.
You also must be signed in to your Communicator or Lync account on the same computer as Microsoft Dynamics GP.
88 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 4 U N I F I E D C O M M U N I C A T I O N S
To enter messenger addresses:
1.
Open the Internet Information window.
(Cards >> Purchasing >> Vendor >> Select a vendor ID >> Internet
Information)
(Cards >> Sales >> Customer >> Select a customer ID >> Internet Information)
Cards >> Sales >> Salesperson >> Select a salesperson ID >> Internet
Information)
Cards >> Payroll >> Employee >> Select an employee ID >> Internet
Information)
2.
Select an address ID to enter the messenger address.
3.
Enter a messenger address. Typically, this will be in the following form: [email protected].
4.
Repeat steps 2 and 3 for each address for master record ID.
5.
When you have finished, choose Save to save the record.
6.
Repeat this procedure to enter messenger addresses for additional master record IDs and addresses.
S Y S T E M U S E R ’ S G U I D E 89
90 S Y S T E M U S E R ’ S G U I D E
Part 3: Working with Microsoft
Dynamics GP
This part of the documentation contains information about entering data, locating information, and printing reports in Microsoft Dynamics GP.
The following information is discussed:
•
Chapter 15, “Cards,” explains how you can use Microsoft Dynamics GP to track
and update master records for your business.
•
Chapter 16, “System and company reports,” explains how you can use reports
to analyze the activities within each of your companies.
•
Chapter 17, “Transactions and batches,” provides general information about
entering transactions individually or entering them in batches.
•
Chapter 18, “Reminders and tasks,” contains information about setting up
reminders within Microsoft Dynamics GP.
•
Chapter 19, “Macros,” contains instructions about automating many Microsoft
Dynamics GP tasks with macros.
•
Chapter 20, “Inquiries and audit trails,” explains how to use inquiry features to
get the data you need to run your business effectively.
•
Chapter 21, “Posting Microsoft Dynamics GP,”
contains information about posting transactions within Microsoft Dynamics GP.
92 S Y S T E M U S E R ’ S G U I D E
Chapter 15: Cards
Precise record keeping is an important part of a business’s success. In Microsoft
Dynamics GP, you’ll use cards as master records to track and update information that’s important to your business. You also can access information using cards from lookup windows in other windows.
This information is divided into the following sections:
•
•
•
Overview of cards
Cards in Microsoft Dynamics GP are the “master records” of information, such as your chart of accounts and your customer, vendor, and employee records. To access a card in Microsoft Dynamics GP, choose the Cards menu from the menu bar and select a series. A menu will appear, from which you can choose a window to enter information in.
Entering card information
To add a record to your system, you’ll open a card and enter information into fields required by Microsoft Dynamics GP or specified by your workplace.
Turn on Show Required Fields (Help >> Show Required Fields) to see what information you must enter in the window before you can save the record or transaction.
To enter card information:
1.
Open the card to enter information for. For this example, we’ve used the Vendor
Maintenance window.
(Cards >> Purchasing >> Vendor)
2.
Enter an ID for the vendor in the Vendor ID field.
S Y S T E M U S E R ’ S G U I D E 93
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
3.
Enter the vendor’s name in the Name field.
4.
Continue entering all additional information about the vendor. You can use the
TAB
key to move from field to field within the window.
5.
Choose Save to save the record and close the window.
Entering Internet information
You can track Internet addresses and Web pages for your company, customers, employees, vendors, and items that you order. Entering this information into
Microsoft Dynamics GP allows you to directly access an individual e-mail address if you have an e-mail application set up, or a World Wide Web location using your system’s browser.
You can customize the labels for all the fields in the Internet User Defined window.
The window that opens when you click a link for the fields in the Internet
Information window depends on what you enter in the field, rather than its label.
To enter Internet information:
1.
Open the Internet Information window.
(Microsoft Dynamics GP menu >> Tools >> Setup >> Company >> Internet
Information)
You also can access the Internet Information window by choosing the Internet
Addresses button in a card window, such as Vendor Maintenance.
2.
Select which category to enter Internet information for.
3.
Enter the ID for the customer, vendor, employee, or item by using the lookup window or by typing the information in the field.
If company is selected as the category, the company you are currently in will be the default entry in the ID field and the field will be locked.
94 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 5 C A R D S
4.
Enter valid e-mail addresses. You can enter multiple addresses in each field.
If you are sending documents through e-mail to your customers and vendors, the e-mail addresses you enter are used as default entries in the Purchasing Email Detail Entry window, the Receivables E-mail Detail Entry window, and the
Sales E-mail Detail Entry window.
If you want to send remittances in Payables Management, you must enter at least one address for the vendor’s remit-to address.
5.
Enter other Internet information.
The window that opens when you click a link for the fields in the Internet
Information window depends on what you enter in the field, rather than its label.
• If you enter an e-mail address, click the label to start an e-mail application, if one is set up. (If you are using Microsoft Mail, add “Mailto:” in front of the e-mail address.)
• Home Page displays the listed web site using your operating system’s default browser. For example, if you had a flower company for a vendor, you could enter their web site address. When you click the Home Page link, your system browser will open the flower company’s Web site.
• FTP Site displays the listed FTP site using your operating system’s default browser. When you click the FTP Site link, your default system browser will opens the FTP site.
• Image starts a graphics application with the specified file open.
• User-defined fields open the file you specify.
6.
When you have finished, choose Save to save the record and close the window.
S Y S T E M U S E R ’ S G U I D E 95
96 S Y S T E M U S E R ’ S G U I D E
Chapter 16: System and company reports
You can print reports to verify information within your entire system and reports to analyze activity within each of your companies.
This information is divided into the following topics:
•
System and company report summary
•
Specifying system and company report options
System and company report summary
You can print reports that contain system and company-wide information in
Microsoft Dynamics GP. Some reports are printed automatically when you complete certain procedures. For example, file maintenance reports are printed automatically when you complete maintenance tasks, such as checking links.
You also can choose to print some reports after completing specific procedures. For example, you can choose File >> Print in a setup window to print a setup report.
However, to print some reports, such as an Exchange Rate Table report or to print mailing labels, you must set up report options to specify sorting options and ranges
of information to include on the report. For more information, refer to
Specifying system and company report options
The following table lists the system and company report types available and the reports that are in those categories.
Report type Report Printing method
User Reports
General Reports
User Notes
Company Access
Shortcut Bar
Preferences
User Security*
User Classes Report*
Current Activity
Systemwide Settings
Location Translations
Activity Tracking Setup
Activity Tracking Detail
Process Server Setup
Process Server Detail
Currency
Exchange Rate Table
Exchange Rates
Multicurrency Access
Intercompany Setup
Language Setup
Choose File >> Print in the window you use to set up the information, or create report options in the User Reports window.
Create report options in the
General System Reports window.
* Indicates reports that can be assigned to named printers. See “Printers” in the System
Administrator’s documentation (Help >> Contents >> select System Administration) for more information.
S Y S T E M U S E R ’ S G U I D E 97
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Report type Report Printing method
Company Setup Reports Company Settings
Addresses
Pathnames
Fiscal Periods
Source Documents
Audit Trail Codes
Posting Accounts
Posting Settings
Routines
Credit Cards
Payment Terms
Shipping Methods
Comments
Fiscal Periods by Origin
Banks
Company General
Reports
Window Notes
Series Groups
Combined Groups
Internet Information
Choose File >> Print in the window you use to set up the information, or create report options in the Setup Reports window.
Create report options in the
General Reports window.
Company Mailing Labels
Reports
Customer Labels
Vendor Labels
Employee Labels
Company Labels
Invoice Labels
Prospect Mailing Labels
Shipping Labels
COD Tags
Company Tax Reports
File Maintenance
Reports
Tax Details
Tax Period Reports
Tax Schedules
Tax Transactions Reports
File Maintenance Error Log Report
Check Links*
Create report options in the
Mailing Labels window.
Choose File >> Print in the window you use to set up the information, or create report options in the Company Taxes
Reports window.
These reports will be printed automatically when you complete the corresponding file maintenance procedure.
System Utility Reports
Security Reports
Activity Tracking Report
Security Task Setup
Security Role Setup
Security Role Assignment
Security Task Assignment
User Security
Unassigned Security Operations
Advanced Financial Report Security
Alternate/Modified Forms and
Reports Setup
Security Operation Access
This report can be printed when you remove activity tracking detail.
Choose File >> Print in the window you use to set up the information, or create report options in the System Reports window.
* Indicates reports that can be assigned to named printers. See “Printers” in the System
Administrator’s documentation (Help >> Contents >> select System Administration) for more information.
Specifying system and company report options
You can print reports by specifying a report option, which contains sorting, restriction, and printing information. After creating a report option, you can save it for future use.
98 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 6 S Y S T E M A N D C O M P A N Y R E P O R T S
System reports provide you with information about Microsoft Dynamics GP users, current activity in the system, and systemwide settings. Company reports provide company-specific setup information, such as fiscal periods, posting settings, and notes you enter about windows.
To specify system and company report options:
1.
Open a reports window. For this example, use a System report.
(Reports >> System >> General)
2.
Select a report by choosing a type of report from the drop-down list. For this example, select Current Activity.
3.
Choose New, or highlight a report option and choose Modify to set up the report parameters. For this example, choose New; the General System Report
Options window appears.
4.
Specify a sorting method and items to include.
5.
To enter a range, select a type of information from the Ranges list, and then enter the beginning of the range in the From field and the end of the range in the To field.
6.
Choose Insert to enter the range, and then enter any additional ranges, if necessary. The report will contain only records that include data within the range selected.
You can create only one restriction for each type of information. For example, if you enter a restriction to print records for the first five of 25 users, you can’t enter another restriction to print records for the last 10 users.
S Y S T E M U S E R ’ S G U I D E 99
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
7.
To select printing destinations, choose Destination. Reports can be printed to the screen, to the printer, to a file, or to any combination of these options. If you mark Ask Each Time, you can select printing options each time you print this report option.
To change your default printer options, see
Chapter 8, “User preferences.”
8.
Save the report options and close the window to return to the original report window.
9.
Highlight the report option and choose Insert.
10. Choose Print.
100 S Y S T E M U S E R ’ S G U I D E
Chapter 17: Transactions and batches
A transaction is an event or condition that is recorded in asset, liability, expense, revenue, and equity accounts. Sales to customers or purchases from vendors are examples of transactions. Transactions are recorded in a journal to link the debits and credits of each transaction and to provide a record of each transaction in one place.
Microsoft Dynamics GP uses the double-entry accounting principle. Each transaction must be recorded with at least one debit and one credit, so that the total currency amount of both debits and credits equal each other. These changes are made as entries in the accounting records; therefore, a double entry always must be made.
However, a transaction won’t always affect both sides of the equation or even two components of the equation. For example, a transaction might affect only one side by increasing one asset and decreasing another for the same amount. The balance sheet shows the equality of the accounting equation. It should always show total assets equal to the total of the liabilities and owners’ equity.
You can enter and post transactions individually or you can enter and post them in groups—called batches.
For information about posting, refer to Chapter 21, “Posting Microsoft Dynamics
Transaction and batch information is divided into the following sections:
•
•
•
Batch requirements and approval options
•
Batch verification and approval
•
Batches without approval options
•
•
Individual transactions
If you enter individual transactions, you can set up your system to post individual transactions immediately after you enter them, so that your records are always up to date. This is called transaction-level posting, or is sometimes called “real-time posting.”
Entering individual transactions and posting them immediately is useful for sales and other transactions if the transactions should be reflected on reports and in inquiry windows as soon as they’re entered.
For instructions to enter an individual transaction, refer to information about the task that you are completing. For example, to enter a General Ledger transaction, refer to the “Transactions” chapter in your General Ledger documentation.
Batches of transactions
A batch is a group of transactions that is identified by a unique name or number.
For example, you can group batches by the date when the transactions were entered
S Y S T E M U S E R ’ S G U I D E 101
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
or if they were entered by a specific employee. You can enter transactions into batches during data entry and then review them before posting them at a later date.
More than one person can enter transactions in the same batch, but not at the same time. Also, a batch can’t be posted if anyone is making changes to it.
You can create both recurring and single-use batches. Multicurrency transactions must be entered in single-use batches.
Single-use batch
Use single-use batches for specific, one-time transactions and is deleted after the transactions are posted. Transactions, such as credit memos, returns, payments, and multicurrency transactions, must be assigned to single-use batches.
For more information about entering a batch for the task you’re completing, refer to the specific information. For example, to enter a batch in Receivables Management, refer to your Receivables Management documentation.
Recurring Batches
Use recurring batches for transactions that will be posted repeatedly—as a batch—according to a frequency that you specify. After the batch is posted, it will remain within the module where you created it. For example, you might create a recurring batch in Sales Order Processing to include the sales order transactions that you enter weekly. At the end of each week, you can post the transactions without having to reenter them. Recurring batches are not posted automatically—you must post them manually.
For instructions to enter transactions in batches, refer to information about the task that you are completing. For example, to enter a Sales Order Processing batch for transactions, refer to the “Batches” chapter in your Sales Order Processing documentation.
Batch requirements and approval options
You can specifiy batch requirements in the Posting Setup window to help ensure the accuracy of the batches that you create.
Verify Number of Trx
If this option is marked in the Posting Setup window, you can specify that a required number of transactions must be entered before you can post a batch. The required number of transactions appear on edit lists, posting journals, and reprinted posting journals.
Verify Batch Amounts
If this option is marked in the Posting Setup window to set control totals for batches, you can enter the required currency amount for all transactions you’ll enter in a batch. The batch total is the absolute value of all transactions in the batch. For example, if you enter an invoice of $1,000 and a return of $250 in a batch, the batch total is $1,250. The batch total must equal the required currency amount before you can post the batch.
If you’re using Multicurrency Management, you must enter batch totals in your company’s functional currency for all batches, including batches containing multicurrency transactions.
If you’re verifying batch totals and you post a batch that contains transactions with errors, the control totals are adjusted to reflect the transactions that were not posted.
Any transactions that contain errors remain in the batch after posting is complete.
The actual number of transactions in the batch is recalculated and the control total
102 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 7 T R A N S A C T I O N S A N D B A T C H E S becomes zero. After you correct the transaction, you must enter a new control total and post again.
The required number of transactions and transaction amounts appear on edit lists, posting journals, and reprinted posting journals.
Require Batch Approval
If this option is marked in the Posting Setup window, a password to require that batches are approved by someone with administrative rights must be entered before posting a batch.
For information about setting up these options in the Posting Setup window, refer to your System Setup manual (Help >> Contents >> select Setting up the System).
Batch verification and approval
If the Require Batch Approval option in the Posting Setup window has been marked, transactions in batches must be verified by an administrator or someone who has been granted access to verify the transactions.
If you have administrative rights to approve the transactions in a batch, you can verify that the transactions are accurate, mark Approved in the window where the transactions were entered, and then enter the password required. When you mark
Approved, the batch has a status of Approved in the Series Posting and Master
Posting windows. You can’t add transactions to batches that have an Approved status.
If you didn’t mark the Require Batch Approval option in the Posting Setup window, batches are assigned a status of either Available or Marked. You can add transactions to batches that have an Available or Unapproved status.
After a recurring batch has been posted, the status becomes Unapproved, so it is available for the next batch of transactions.
You can’t, however, mark a batch for posting if the control totals don’t match. To mark the batch for posting, you’d mark it as Unapproved, change the control total to match the total number of transactions, approve the batch again, and mark it for posting.
Batches without approval options
If batch approval options haven’t been set up in the Posting Setup window, you won’t need to approve the marked batches before posting. You can refer to this section for information about how you can activate batch approvals and work with batches that require approvals.
Activating batch verification
If a batch was marked for posting and batch verification options haven’t been set up, control totals for the marked batch won’t be verified before posting.
Adding transactions to approved batches
Transactions can be added only to batches that have an Available or Unapproved status; you can’t add transactions to batches that have been approved for posting.
S Y S T E M U S E R ’ S G U I D E 103
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Approving a recurring batch
After a recurring batch has been posted, the status automatically will become
Unapproved. To post the recurring batch again, you must approve it before doing so.
Approving unbalanced batches
It’s possible to approve a batch that has unbalanced control totals. For example, you could approve a batch even if the actual number of transactions entered in the batch doesn’t equal the control total.
The approval of batches and verification of control totals are two separate features.
You can’t mark a batch for posting if the control totals don’t match. You must mark the batch as unapproved, change the control total to match the total number of transactions, approve the batch again, and mark it for posting.
Specifying batch totals for transaction-level posting
When transactions are posted using transaction-level posting, the batch control fields always will contain zero amounts. The transactions will have been posted, however, even though zeros are displayed. If the transactions aren’t posted, a message will be displayed in the posting journal to alert you that the transactions weren’t posted.
Deleting approved batches
Approved batches can’t be deleted. To delete a batch that has been approved, you must mark it as unapproved first.
Verifying totals in batches with errors
If you’re verifying batch totals and you post a batch that contains transactions with errors, the control totals are adjusted to reflect the transactions that were not posted.
Any transactions that contain errors remain in the batch after posting is complete.
The actual number of transactions in the batch is recalculated and the control total becomes zero. After you correct the transaction, you must enter a new control total and post again.
Batch statuses
Batches can have several different posting statuses. A posting status indicates where a batch is in the overall posting status. Some batch statuses only occur in specific modules. Refer to the table for more information.
Batch posting status
Available
Meaning Modules
Approved
Busy
Deleting
The batch isn’t in use and can be modified.
The batch can be marked for posting but can’t be modified
All
All
The batch is being modified by another user and can’t be marked for posting or posted.
All
The batch is being deleted by another user.
All
104 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 7 T R A N S A C T I O N S A N D B A T C H E S
Batch posting status
Meaning Modules
Marked The batch will be posted when you choose Post. After a batch has been marked, you can’t modify it unless you change its status back to
Available.
No Transactions The batch does not contain any transactions.
All
General Ledger
Inventory Control
Invoicing
Payables Management
Payroll
Receivables Management
Sales Order Processing
Inventory Control Receiving
Recurring Batch
Posted
Maximum Times
Posting
Unequal Actual/
Control Batch
Totals
Unequal Actual/
Control
Employees
Unequal Actual/
Control Journal
Entries
The batch is receiving transactions from another module.
The batch already has been posted the maximum number of times allowed for a recurring batch.
The batch is being posted.
The batch has a different amount for
Actual Batch Total than for control
Batch Total.
The batch has a different amount for
Actual Employees than for Control
Employees.
The batch has a different amount for
Actual Journal entries than for
Control Journals Entries.
General Ledger
Inventory Control
Payables Management
Payroll
Receivables Management
All
General Ledger
Invoicing
Payables Management
Receivables Management
Sales Order Processing
Payroll
This only applies if the Verify Batch
Amounts option is marked in the
Posting Setup window.
General Ledger
This only applies if the Verify Number of Trx option is marked in the Posting
Setup window.
Unequal Actual/
Control Quantity
Totals
The batch has a different amount for
Actual Quantity Total than for Control
Quantity Total.
Inventory Control
This only applies if the Verify Batch
Amounts option is marked in the
Posting Setup window.
Unequal Actual/
Control
Transactions
Unapproved
The batch has a different amount for
Actual Transactions than for Control
Transactions.
The batch hasn’t been approved for posting. You can modify the batch.
You can approve the batch and mark it for posting in a batch entry window only when the batch totals equal the control totals.
All
This only applies if the Verify Number of Trx option is marked in the Posting
Setup window.
General Ledger
Inventory Control
Invoicing
Payables Management
Payroll
Receivables Management
Sales Order Management
This only applies if the Require Batch
Approval option is marked in the
Posting Setup window.
S Y S T E M U S E R ’ S G U I D E 105
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Interrupted transactions
Use the transaction entry windows to continue processing interrupted transactions.
Statuses are not assigned to transaction processes that have been interrupted. When you log in to the system, a message will be displayed if a transaction-level process was interrupted. If processing is interrupted, refer to the following information.
If these solutions aren’t helpful, we recommend that you call your reseller, qualified installer, or Microsoft Dynamics GP Technical Support.
Posting interrupted
Open the transaction entry window. The transaction is available for posting. You can continue entering transactions.
Printing interrupted
Open the transaction entry window. The posting journal is printed when you close the window.
Table updates interrupted
Open the transaction entry window. The system finishes updating tables. No further action is needed.
106 S Y S T E M U S E R ’ S G U I D E
Chapter 18: Reminders and tasks
You can create and update a list of tasks, assign tasks to other users, set reminders for due dates, and view the tasks that you have completed. You also can set up reminders for overdue invoices, payables due, recurring batches of transactions that you need to post, and SmartList favorites that meet conditions that you specify.
This information is divided into the following sections:
•
•
•
Setting up predefined reminders
•
•
•
Creating a task
Use the Task window to create a new task. For example, you can create tasks to remind yourself to print reports or make backups on a regular schedule. You also can make a task recurring or link a task to a Microsoft Dynamics GP window, a Web page, or an external program or file.
Tasks will be displayed in the Reminders window on the date that they are due. You also can view a list of the tasks that are assigned to you in the Task List window. For more information, see
To create a task:
1.
Open the Task List window.
(Microsoft Dynamics GP menu >> Task List)
2.
Choose New Task. The Task window will open.
3.
Enter a description for the new task in the Task field.
4.
Select the user ID for the person to assign the task to, or select <Any User> so that all users will see the task in the Reminders window. Any user then can complete the task.
Because this is a new task, the status is Pending. When the task is completed, the status will be changed to Completed.
5.
Select the type of link to be attached to this task. If you select No Link, skip to step 6.
S Y S T E M U S E R ’ S G U I D E 107
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Microsoft Dynamics GP window
Select this option to link to a Microsoft
Dynamics GP window from a task so that the user who is assigned the task can easily access a window that you specify. Choose the Name expansion button to open the Add Command window, where you can select a window name.
You only can add links to windows that you have security access to.
Web Page
Select this option to link to a Web Page from a task so that the user who is assigned the task can easily access the Web page. Enter the URL for the
Web page.
External program or file
Select this option to link to an external program or file so that the user who is assigned the task can easily start a program or open a file that you specify. Choose the Browse button to select an external program or file to link to.
6.
To make this a recurring task, choose Recurrence to open the Recurrence window. Otherwise, skip to step 10.
7.
In the Recurrence window select how often you should be reminded to complete the task. You can select Daily, Weekly, Monthly, or Yearly.
8.
Specify when the task should be repeated.
• To be reminded to complete the task at regular intervals, select one of the options in the Recurrence Pattern area.
• To be reminded to complete the task at regular intervals until a specific date is reached, enter starting and ending dates in the Range of recurrence area.
Choose the Remove Recurrence button to stop the reminder from repeatedly opening.
9.
Choose OK to save the information and return to the Task window.
10. In the Task window, choose Save to save the information. Close the window.
108 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 8 R E M I N D E R S A N D T A S K S
Viewing the task list
Use the Task List window to review the tasks assigned to you.
To view the task list:
1.
Open the Task List window.
(Microsoft Dynamics GP menu >> Task List)
2.
The tasks that are assigned to you are displayed.
• You can select a task by double-clicking it. The Task window will open, where you can delete a task, or update the description, due date, user
assignment, or status of the task. See
information.
• Mark the check box next to the task to indicate that it has been completed.
3.
Choose Close to close the window.
Setting up predefined reminders
Use the Reminder Preferences window to specify which predefined reminders to be reminded of and how often to be reminded.You also can specify whether the predefined reminder should be displayed as a Cue in the Home Page. Predefined reminders are reminders that already have been created for you and that you can choose to be reminded of. Predefined reminders exist for overdue invoices, payables due, recurring General Ledger batches, recurring Receivables batches, recurring Payables batches, items due for stock count, and lots due to expire. The options displayed in this window depends on what you have installed and registered.
You also can use this window to create customized reminders. For more information, see
To set up predefined reminders:
1.
Open the User Preferences window.
(Microsoft Dynamics GP menu >> User Preferences)
S Y S T E M U S E R ’ S G U I D E 109
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
2.
Choose Reminders to open the Reminder Preferences window.
3.
Mark the check box for each event to be reminded of and enter the number of days preceding the event that the reminder should open.
4.
Specify whether to display predefined reminders as Cues.
5.
Choose OK and close the window.
6.
In the User Preferences window, choose OK to close the window.
Creating customized reminders
You can set up customized reminders to alert you when a SmartList favorite meets the conditions that you specify. You also can specify whether the custom reminder should be displayed as a Cue in the Home Page. For example, for the default
SmartList favorite named Customer Balance, you can set up a customized reminder to let you know when a customer’s balance is larger than $1,000.
Use the Reminder Preferences window and the Custom Reminders window to create new customized reminders.
To create a custom reminder:
1.
Open the Reminder Preferences window.
(Microsoft Dynamics GP menu >> User Preferences >> Reminders button)
110 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 8 R E M I N D E R S A N D T A S K S
2.
Choose New to open the Custom Reminder window.
3.
Enter a SmartList favorite.
The Category and Visible to information for the SmartList favorite that you entered is displayed.
4.
Mark one of the following options to indicate the condition that must exist for the reminder to be displayed.
Number of records
Mark this option to be reminded when the number of records in a SmartList favorite meet a condition that you specify. For example, you could create a condition where you would be reminded when a SmartList favorite contained greater than 50 records.
Total of column
Mark this option to be reminded when the amount for a
SmartList favorite column that you specify meets a condition that you specify.
For example, you can create a condition where you will be reminded if the
Document Amount column in the Sales Transactions SmartList favorite is less than $1,000.
5.
If you marked Number of records, you can specify whether to display custom reminders as Cues.
6.
Choose OK to save your changes and close the window.
A list of customized reminders that you have created is displayed in the
Reminders Preferences window.
Viewing reminders
Use the Reminders window to view reminders that were generated automatically
or by a task that you entered. See
on page 107 for more information.
If you have overdue tasks or tasks that are due today, the Reminders window will be displayed when you log in to Microsoft Dynamics GP.
If your home page is set up to be displayed when you start Microsoft Dynamics GP and you have selected to display reminders in the To Do area of your home page, the Reminders window will not be displayed when you log in to Microsoft
Dynamics GP.
S Y S T E M U S E R ’ S G U I D E 111
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
To view reminders:
1.
Open the Reminders window.
(Microsoft Dynamics GP menu >> Reminders)
2.
Use the View menu to select the types of events that will be displayed. You can view all reminders, overdue invoices, bills to pay, general ledger batches, receivables batches, payables batches, stock counts due, tasks, or lots due to expire. You also can complete the following actions.
• You can double-click a reminder in the Reminders window to take action on
on page 112 for more information.
• You can choose New Task to create a new task. See
on page 107 for more information.
• You can click the Change Reminder Preferences link to open the Reminder
Preferences window, where you can specify events to be reminded of and how often to be reminded.
3.
Choose Close to close the window.
Acting on a reminder
Use the Reminders window to complete an action based on a reminder.
To act on a reminder:
1.
Open the Reminders window.
(Microsoft Dynamics GP menu >> Reminders)
2.
Select a reminder and choose Open. A menu will be displayed.
112 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 8 R E M I N D E R S A N D T A S K S
Depending on the type of reminder you are opening, you can select one of the following menu items to open Microsoft Dynamics GP windows where you can complete actions associated with the reminder.
Reminder
Overdue Invoices
Payables Due
General Ledger Batches
Receivables Batches
Payables Batches
Stock Counts Due
Menu Item
Document
Customers
Document
Select Checks
Vendors
Batch Entry
Post Batches
Batch Entry
Post Batches
Batch Entry
Post Batches
Stock Count Schedule
Action
Opens the Receivables
Transaction Inquiry Zoom window, where you can view a transaction as it was originally posted using the
Receivables Transaction Entry window.
Opens the Customer
Maintenance window, where you can add and modify customer records and information.
Opens the Payables
Transaction Entry Zoom window, where you can view the transaction as it was originally entered.
Opens the Select Payables
Checks window, where you can select vouchers for payment.
Opens the Vendor
Maintenance window, where you can create, delete, and inactivate vendor records, and place vendor holds.
Opens the Batch Entry window, where you can create batches or post individual batches.
Opens the Series Posting window, where you can post the batch that you selected.
Opens the Receivables Batch
Entry window, where you can add, modify, and post batches of receivables transactions.
Opens the Sales Series
Posting window, where you can post batches from the
Sales series.
Opens the Payables Batch
Entry window, where you can create a batch, or group, of transactions.
Opens the Purchasing Series
Posting window, where you can post payables batches.
Opens the Stock Count
Schedule window, where you can create, modify, or delete a stock count schedule.
S Y S T E M U S E R ’ S G U I D E 113
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Reminder
Tasks
Lots Due to Expire
Menu Item
Item Quantity maintenance
Item Inquiry
Task
Task List
Lot Number Inquiry
Edit Lot Number Attributes
Serial/Lot Trace Inquiry
Action
Opens the Item Quantities
Maintenance window, where you can update and review information about the quantities of a specific item at a specific site.
Opens the Item Stock Count
Inquiry window, where you can view stock count information about a specific item.
Opens the Task window with the task that you selected displayed.
Opens the Task List window, where you can view the tasks that are assigned to you.
Opens the Lot Number Inquiry window, where you can view information about items that track lot numbers.
Opens the Edit Lot Number
Attributes window, where you can edit attributes assigned to a lot number.
Opens the Serial/Lot Trace
Inquiry window, where you can track the life cycle of serial or lot numbers. You also can use the Serial/Lot Trace
Inquiry window to trace the recall of serial or lot numbers.
3.
In the Reminders window, choose Close to close the window.
114 S Y S T E M U S E R ’ S G U I D E
Chapter 19: Macros
Use the macro system in Microsoft Dynamics GP to enhance data processing power by automating some of your accounting tasks, such as table maintenance and reporting. This information is divided into the following sections:
•
•
•
•
Macros overview
A macro is a recording of each key you pressed or mouse click you made while performing a procedure. (You could think of creating a macro as a “recording session.”) Later, the macro can be played. As it is played, each entry will be recreated just as though you were typing the keystrokes and using the mouse yourself.
Although a macro can begin anywhere within Microsoft Dynamics GP, the point where a macro begins must be active before you can play it. For example, if you begin recording a macro using the General System Reports window, that window must be active on your screen for the macro to play. We recommend that you begin every macro by making a selection from the menu bar or toolbar.
Recording a macro
Although you can create macros for any entries you make in the Microsoft
Dynamics GP system, macros typically are most effective for the following tasks:
• Printing routine reports that can be compiled the same way at regular intervals.
• Performing one or more tasks that require lengthy computer processing time.
You can begin replaying the macro when you’re ready to go home for the evening or a weekend. The macro automatically will complete the task and, if you want, exit the Microsoft Dynamics GP system when it is finished.
• Standardizing the completion of crucial accounting tasks, such as posting, printing financial statements, or closing a month or a year.
The following table lists all the menu options available while recording a macro.
Recording option
Record
Stop Record
Suspend Recording
Resume Recording
Insert Pause
Description
Displays the dialog box where you specify the macro’s name and location.
Ends the recording of the macro.
Allows you to enter a prompt that appears when the macro is played; the macro will be paused, as well. Choose Resume
Recording to continue recording.
Continues recording the macro after recording is suspended, if you used the Suspend Recording option.
Pauses the recording of the macro.See
information.
S Y S T E M U S E R ’ S G U I D E 115
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
After the macro is recorded, you can edit it using a text editor, such as Notepad. To delete a particular Microsoft Dynamics GP macro, you can either record a new macro using the same name, or delete the macro’s file at the operating system level.
To record a macro:
1.
Start from the menu bar. Doing so will make it easy to remember where you started your macro from. You’ll need to know the point where the macro began to be able to replay the macro.
2.
On the Microsoft Dynamics GP menu, choose Tools >> Macro >> Record to display the Name the macro window.
3.
Specify a name and location for the macro using naming conventions:
• Make the filename descriptive (for example, a macro might be named
YTDIncome.mac).
• Use the .MAC extension to indicate that it’s a macro.
• Save all your macros in a folder. Otherwise, the macro will be saved in the main folder for your system. We recommend that you save your macros to
C:\Program Files\Microsoft Dynamics\GP\Data.
To program the macro so that you can enter data while playing a macro, see
4.
Perform the procedure to be recorded.
When you record a macro, use keyboard commands rather than your mouse as much as possible. If you edit the macro later in NotePad, it will be easier to find the commands and steps to change.
5.
Stop the macro.
(Microsoft Dynamics GP menu >> Tools >> Macro >> Stop Record)
Recording a data entry step
If the procedure you’re recording requires that the user enter additional information or perform certain actions each time the macro is played, you can insert pauses in the macro at selected points and add a message that will be displayed when the macro pauses.
When you play the macro, it will pause at these points, allowing you to take the necessary action and then continue playing the macro. For instance, you may want to insert a macro pause before a report is printed by the macro. The message could prompt the user to verify printer setup before continuing playback. After printer setup has been verified, the user would continue playing the macro (Microsoft
Dynamics GP menu >> Tools >> Macro >> Continue).
116 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 1 9 M A C R O S
To record a data entry step:
1.
Complete steps 1 through 4 in the
2.
When you reach the point where you need to enter data or perform an action, on the Microsoft Dynamics GP menu, choose Tools >> Macro >> Insert Pause.
The Macro Insert Pause window appears.
3.
Enter a message that will instruct the user to complete the action needed before continuing playback. The message will appear at the specified point when you play back the macro.
4.
Choose OK.
5.
On the Microsoft Dynamics GP menu, choose Tools >> Macro >> Resume
Recording to restart the recording.
6.
Repeat steps 2 through 5, as necessary, until you are finished recording the macro.
7.
Stop the macro.
(Microsoft Dynamics GP menu >> Tools >> Macro >> Stop Record)
Playing a macro
You can play Microsoft Dynamics GP macros in the following ways:
• On the Microsoft Dynamics GP menu, choose Tools >> Macro >> Play.
• Add the macro to the shortcut bar. For more information about the shortcut bar, see
Chapter 9, “Shortcut navigation.”
• Add the macro to a list of routines, and select it from the list of routines. See the
System Administrator’s Guide (Help >> Contents >> select System
Administration) for more information on customizing routines.
To play a macro:
1.
On the Microsoft Dynamics GP menu, choose Tools >> Macro >> Play. The
Select a Macro to Play window is displayed.
2.
Select the macro to play and choose Open. The macro will begin playing.
3.
To control how the macro plays, select one of the playback options.
S Y S T E M U S E R ’ S G U I D E 117
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
The options are listed in the following table.
Playback option
Play
Stop Play
Pause
Step
Continue
Description
Displays a dialog box that contains all the macros in the current folder that were assigned a .MAC extension.
After you select a macro to play, the Macro menu will display up to four options: Stop Play, Pause, Step, and
Continue.
Stops playing the macro.
Pauses the macro until you choose Continue or Step.
Allows you to play the macro one line at a time. For instance, if your macro doesn’t run through successfully, this option allows you to follow the process of the macro, step by step, to determine where the problem is.
The macro will not step through a dialog box one line at a time because the Step option is not available when a dialog box is displayed.
Continues playing the macro after play is paused, if the
Pause option was used when recording the macro.
If the Insert Pause option was used when recording, a dialog box appears when you play the macro, displaying a prompt.
This prompt was entered in the Macro Insert Pause window.
Choose OK in the dialog box, enter or verify the appropriate data, then choose Continue from the Macro menu.
4.
If a prompt appears as the macro is running, complete the requested action and choose OK.
118 S Y S T E M U S E R ’ S G U I D E
Chapter 20: Inquiries and audit trails
While working on a task, you can use links to open other windows to verify information. You also can open inquiry windows to view historical information that you may need or to trace an audit trail. Microsoft Dynamics GP provides several methods for obtaining information about your business.
This information includes the following sections:
•
Accessing information using an inquiry window
•
•
Performing an audit trail inquiry
•
•
•
Printing an audit trail report
Accessing information using an inquiry window
Use the Microsoft Dynamics GP inquiry feature to review information for all open periods or for an historical year in detailed or summary form. Because the inquiry windows provide access to information in a quick, efficient manner, you’ll always have a current view of your system or your company’s financial status.
Microsoft Dynamics GP includes a number of features to help you scan this information easily. Using the browse buttons, you can move through a series of records by choosing an arrow button at the bottom of the window. You can view summary or detailed information, and sort the records that you want to view. The selection you make determines the order in which the records appear when you choose the browse buttons.
To access information using an inquiry window:
1.
Open an inquiry window. For this example, use the General Ledger Detail
Inquiry window.
(Inquiry >> Financial >> Detail)
2.
Select the item to view. In this case, select the account and year you want to view.
S Y S T E M U S E R ’ S G U I D E 119
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
3.
To print, choose File >> Print. A report showing the information in the inquiry window is printed to the selected destination. In this example, the information shows the transactions for the selected account.
You also can choose the printer button in the Detail Inquiry window or press
CTRL
+
P
to print.
4.
To view more detail, highlight a line item (if applicable) and click the field link.
In this example, you can click the Account, Journal Entry, and Currency ID links.
5.
To exit the inquiry windows, close the windows.
Using the Go To menu
The Go To menu is located in the upper right corner of selected windows. Use the
Go To button to display a list of additional windows that you can access by selecting the window you need to use.
To use the Go To menu:
1.
Open a window containing a Go To button. For this example, we’ve used the
SmartList window.
(Microsoft Dynamics GP menu >> SmartList)
2.
From the tree structure in the left side of the window, choose the folder to search for information in. For example, you can choose the Accounts folder.
3.
Select the item that you want additional information about. The Go To button will be unavailable until you select an item.
120 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 0 I N Q U I R I E S A N D A U D I T T R A I L S
4.
Choose the Go To button, and choose a window from the available list.
5.
When the window opens, you can locate the information you need about the item.
Performing an audit trail inquiry
An audit trail allows you to trace a transaction from any point in the Microsoft
Dynamics GP system back to the batch or window where it was originally entered.
For this example, you can use the Detail Inquiry window and the Payroll Check and
Transaction windows for tracing the audit trail code for a payroll transaction. In addition, the links allow you to refer to the source document for a transaction.
You may want to use the sample company, Fabrikam, Inc., to view examples of inquiries and audit trail codes. To use the sample company, on the Microsoft
Dynamics GP menu, choose Users and Company. Then switch to LESSONUSER1 or
LESSONUSER2 and select Fabrikam, Inc. as the company.
For more information, refer to
Printing an audit trail report
To perform an audit trail inquiry:
1.
Open a transaction inquiry window. For this example, use the Detail Inquiry window.
(Inquiry >> Financial >> Detail)
2.
Select an ID or number to complete an inquiry on. For this example, select an account number.
S Y S T E M U S E R ’ S G U I D E 121
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
3.
Select a year. You can select either an open or an historical year, if available.
4.
If applicable, select a line item to view. In this example, select the first item in the list.
5.
To see the audit trail code, choose the Show Details button in the upper right corner of the scrolling window. The audit trail codes for the line items will be displayed.
6.
To print a report containing the information shown in the window, choose File
>> Print.
7.
When you’ve finished reviewing the information for the journal entry, choose
Clear. The Detail Inquiry window is cleared.
Tracing the audit trail
The audit trail is a collection of records that allows you to trace a transaction from any point in the Microsoft Dynamics GP system back to the batch or window in which it was originally entered. With the information you’ve entered about the transactions, you should be able to trace them from their originating point in
Microsoft Dynamics GP to the actual source documents—such as invoices, checks, or receipts—that provided the basis for the transactions.
The audit trail is integral to sound accounting practices. It allows independent auditors and your company’s accountants to verify the effectiveness and accuracy of your company’s recordkeeping practices. This information, in turn, assures you that the information that you base your business decisions on is accurate and complete.
Traditionally, the audit trail has consisted of ledgers or journals that show where and when individual transactions were posted. Microsoft Dynamics GP provides this kind of audit trail with its posting journals; it also provides an online audit trail tool using links.
Microsoft Dynamics GP has two ways of tracking audit trail information:
Source document codes
A source document code identifies the type of journal or entry that can be examined for more information about a specific transaction. Source document codes are useful particularly if you enter a significant portion of all your transactions in General Ledger; you can assign a source document code that easily identifies the type of transaction you’re entering. For example, CRJ is the source document code for Cash Receipts Journal if the transaction represents a cash receipt. Microsoft Dynamics GP provides a limited number of commonly used source document codes, and you can set up additional codes using the Source Document Setup window. Refer to the System Setup instructions (Help >> Contents >> select Setting Up The System) for more information about setting up source document codes. Refer to the General Ledger documentation for information about assigning source document codes.
Audit trail codes
An audit trail code is a series of alphanumeric characters that provide a precise record of each transaction, including where it’s been posted, as the transaction has made its way through the Microsoft Dynamics GP system. These codes identify the posting journal that the transaction appears on.
122 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 0 I N Q U I R I E S A N D A U D I T T R A I L S
Transactions posted from an accounting module through General Ledger will have two audit trail codes: one for the module and one for General Ledger. For example, a Receivables Management sales transaction may be assigned a code of
RMSLS00000214 when it’s posted in Receivables Management, and
GLTRX00000485 when it’s posted in General Ledger. After the transaction reaches
General Ledger, the Receivables Management audit trail code will become the
General Ledger batch ID. As a result, General Ledger posting journals will contain the audit trail codes for both postings—the one in Receivables Management and the one in General Ledger.
To ensure the integrity of the audit trail, the audit trail codes included with Microsoft
Dynamics GP can’t be changed, and you can’t create additional audit trail codes. However,
you can change the number that’s assigned to the next posting journal of a particular type.
Use the Audit Trail Codes Setup window to do this.
Since searching through all your posting journals can be tedious, Microsoft
Dynamics GP provides additional reports, such as cross-reference reports, that help you make the connections. For more information about cross-reference reports, refer to the General Ledger documentation. To print a cross-reference report, see
Printing an audit trail report
Audit trail codes
Microsoft Dynamics GP automatically assigns audit trail codes to transactions as they’re posted. Audit trail codes allow you to trace the posting sequence of a given transaction back to the point where it was originally entered in Microsoft Dynamics
GP. For example, if a transaction originated in the Clearing Entry window, the system would assign the transaction a five-character journal identification code
GLCLR, followed by an eight-digit sequence number, such as 00000002.
Audit trail codes provide a precise record of each transaction and where the information has been posted within the system. Audit trail codes also indicate where you should look if you need detailed information about a specific transaction. In General Ledger, for example, audit trail codes are printed on posting journals, the Cross Reference Report by Journal Entry, the Cross Reference Report by Audit Trail Code, the Transaction History Report, and the Year End Closing
Report.
A list of all audit trail codes is given below. Because you also can post transactions to a previous year in General Ledger, we’ve included the audit trail codes that are assigned to transactions posted to history.
Financial
Posted from
Reconcile Bank Statement
Bank Deposit Entry
Bank Transaction Entry
Bank Transfer Entry
Clearing Entry
Quick Entry (Journal History)
Quick Entry (Journal Entry)
General Entry (Transaction History)
General Entry (Transaction Entry)
Audit trail code
CMADJ
CMDEP
CMTRX
CMXFR
GLCLR
GLQHS
GLQJE
GLTHS
GLTRX
S Y S T E M U S E R ’ S G U I D E 123
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Posted from
General Entry (Transaction Entry)
General Entry (Transaction Entry)
General Entry (Transaction History)
Currency Revaluation (Historical Year)
Currency Revaluation (Current Year)
Euro Conversion
Euro Conversion
Euro Conversion
Sales
Posted from
Receivables Apply Documents
Receivables Cash Receipts
Receivables Transaction Entry
Transfer Commissions
Receivables Posted Transaction Maintenance
Invoice Entry
Sales Deposits
Sales Transaction Entry
Sales Voided Transactions
Currency Revaluation
Purchasing
Posted from
Apply Payables Documents
Computer Checks
Manual Payment Entry
Payables Transaction Entry
Void Payments
Void Vouchers
Purchasing Voided Trx
Purchasing Invoice Entry
Receivings Trx Entry
Receivings Voided Trx
Currency Revaluation
Euro Conversion
Returns Transaction Entry
Voided Purchase Invoice
Inventory
Posted from
Item Transaction Entry
Item Transfer Entry
Assembly Entry
Audit trail code
ICREV
ICTRX
ICTHS
MCRVH
MCRVL
MCCNV
MCCVH
RMCNV
Audit trail code
RMAPY
RMCSH
RMSLS
RMCOM
RMMSC
INVCE
SLSDP
SLSTE
SLSVT
RMRVL
Audit trail code
PMAPY
PMCHK
PMPAY
PMTRX
PMVPY
PMVVR
POPVT
POIVC
RECVG
RECVT
PMRVL
PMCNV
PORET
PVIVC
Audit trail code
IVADJ
IVTFR
BMASM
124 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 0 I N Q U I R I E S A N D A U D I T T R A I L S
Payroll
Posted from
Post Payroll Checks
Payroll Manual Checks/Adjustment Entry
Period-End Reports
Void Checks
Audit trail code
UPRCC
UPRMC
UPRPE
UPRVC
Printing an audit trail report
You can print reports to show the transactions that you view on your screen. These reports can be sorted by audit trail code, journal entry number, or source document number. When you create the report, you can set up restrictions so that you obtain only the information you need.
To print an audit trail report:
1.
Open the Cross-Reference Report window.
(Reports >> Financial >> Cross-Reference)
2.
Select the type of report to print.
3.
Choose New, or highlight a report option and choose Modify to set up the report parameters. The Cross-Reference Report Options window opens.
S Y S T E M U S E R ’ S G U I D E 125
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
4.
Name the report option and select the parameters for the report.
5.
Choose Destination to select the printer destination.
6.
Save the report options and close the window to return to the Cross-Reference
Report window.
7.
Highlight the report option and choose Insert.
8.
Choose Print.
126 S Y S T E M U S E R ’ S G U I D E
Chapter 21: Posting Microsoft Dynamics GP
Posting the transactions that you’ve entered makes them part of your company’s permanent records. Until they’re posted, transactions can be changed or deleted.
After they’ve been posted, they can’t be changed in any way, although you can enter correcting transactions to correct errors, and you can void some posted transactions that aren’t valid anymore. Voiding transactions typically is allowed for checks and similar preprinted forms.
You’ll notice the effects of posting on most reports, which will display updated amounts each time transactions related to the reports are posted.
For information about setting up posting for your company, see the System Setup instructions (Help >> Contents >> select Setting Up The System).
Sometimes posting might be interrupted because of a power fluctuation or some other posting problem, or if any transactions in a batch contain errors. Your
Microsoft Dynamics GP system will attempt to recover an interrupted batch the next time you log in. If necessary, you can use the Batch Recovery window to continue posting the interrupted batch. You also can recover individual transactions that have been interrupted.
•
Transaction-level and batch-level posting
•
•
•
Posting batches within a series
•
Posting batches using master posting
•
Batch posting recovery overview
•
Continuing an interrupted batch
•
Continuing a batch posted with errors
•
Transaction-level and batch-level posting
Microsoft Dynamics GP has two levels of posting—transaction-level posting and batch-level posting.
Transaction-level posting
If you use transaction-level posting (sometimes called “real-time” posting), you must post the transaction immediately. You can’t save a transaction without posting it. Transaction-level posting is useful for sales and other transactions that should be displayed on reports and in inquiry windows as soon as they’re entered.
The posting date for transactions that you enter in General Ledger batches, and any other transactions that you post using transaction-level posting, will be transaction date.
For more information, see
Batch-level posting
This type of posting provides several options that allow you to post batches individually or in groups. If you post transactions as part of a batch, you can enter both a transaction date and a batch date when you enter transactions. The default date for each date is the user date—the date displayed on the toolbar. For more information about posting dates, see the System Setup instructions (Help >> Contents >> select Setting Up The System).
S Y S T E M U S E R ’ S G U I D E 127
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
For more information, refer to
Posting methods for batches
The following three methods are available for posting batches. The only difference between the three types is the number of batches you post at one time.
Batch-level posting
Allows you to post one batch at a time from a batch entry
window. For more information, see
Series posting
Allows you to post any or all of the available batches for the selected Microsoft Dynamics GP series, such as the Inventory series. For more information, see
Posting batches within a series
Master posting
Allows you to post any or all available batches throughout the
Microsoft Dynamics GP system. For more information, see
Posting batches using master posting
Posting an individual batch
You can use batch-level posting to post one batch at a time from a batch entry window. Batch posting is useful for a number of situations.
• Individuals can post groups of transactions that they’ve entered.
• Posting is restricted to accounting managers or other supervisors.
• Posting is managed so that transactions with higher priority can be posted before less urgent transactions are posted.
To post an individual batch:
1.
Open a batch entry window. For this example, use the Inventory Batch Entry window.
(Transactions >> Inventory >> Batches)
2.
Enter or select a batch ID to be posted.
3.
Choose Transactions to verify the transactions included in the batch.
4.
Make changes to the transactions, as necessary. Choose Save.
128 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 1 P O S T I N G M I C R O S O F T D Y N A M I C S G P
5.
Close the window to return to the batch entry window.
6.
Verify your selections in the batch entry window for accuracy. For detailed information about a batch, highlight the batch, then click the Batch ID link to open the Batch Entry window, where you can verify batch information, such as batch requirements and controls. You also can choose File >> Print to print edit lists.
7.
Post the batch.
Posting batches within a series
You can use series-level posting to post any or all of the available batches for the selected Microsoft Dynamics GP series, such as the Inventory series. Only the person who marks a batch available for posting can post that batch. Series posting might be used in a setting where posting is centralized, but where some types of transactions need to be posted more frequently than others.
We recommend that you back up company data before posting. If a power fluctuation or another problem occurs, you can restore your data and begin the posting process again. For more information about making backups, refer to the
System Administrator’s Guide (Help >> Contents >> select System
Administration).
To post batches within a series:
1.
Open a series posting window. For this example, use the Purchasing Series
Posting window.
(Transactions >> Purchasing >> Series Post)
2.
Select the batches for posting by marking or unmarking the box to the left of each batch listed in the window. Only the person who marked a batch for posting can post the batch. However, you can unmark and mark the batch again to include it when posting a series.
3.
Verify your selections for accuracy.
For detailed information about a batch, highlight the batch, then click the Batch
ID link to open the Batch Entry window, where you can verify batch information, such as batch requirements and controls. You also can choose
File >> Print to print edit lists.
4.
Choose Post to post the marked batches.
S Y S T E M U S E R ’ S G U I D E 129
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Posting batches using master posting
You can use master posting to post any or all available batches throughout your
Microsoft Dynamics GP system. When you use the master posting process, all batches marked for posting will be posted regardless of who marked them.
Master posting is an excellent way to update all the records in the Microsoft
Dynamics GP system at the same time, and it also is ideal for organizations where posting is managed by a single person. If you process a relatively small number of transactions or follow a schedule for posting, this option might work, as well.
You can require that a password be entered before batches can be posted. The options to approve batches for posting and to require passwords before posting will be available only if you’ve marked the Require Batch Approval option and entered a batch approval password in the Posting Setup window.
We recommend that you back up company data before posting. If a power fluctuation or another problem occurs, you can restore your data and begin the posting process again. For more information about making backups, refer to the
System Administrator’s Guide (Help >> Contents >> select System
Administration).
To post batches using master posting:
1.
Open the Master Posting window.
(Microsoft Dynamics GP menu >> Tools >> Routines >> Master Posting)
2.
Select the series for posting, or select All.
3.
In the Batch ID column, mark or unmark the batches for posting.
4.
Verify your selections for accuracy. For detailed information about a batch, highlight the batch, then click the Batch ID link to open the Batch Entry window, where you can verify batch information, such as batch requirements and controls. You also can choose File >> Print or the printer icon button to print edit lists.
5.
Choose Post to post the selected batches.
130 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 1 P O S T I N G M I C R O S O F T D Y N A M I C S G P
Batch posting recovery overview
When you log in to Microsoft Dynamics GP after a power fluctuation or some other posting problem occurs, or if transactions in a batch contain errors, a message will be displayed if any of the batches have been recovered. In addition, the recovery status is displayed in the batch status column in a Batch ID lookup window, a Series
Posting window, or the Master Posting window.
Only the user who posted the batch is notified of the batch posting failure.
However, any user who has access to the Batch Recovery window (Microsoft
Dynamics GP menu >> Tools >> Routines >> Batch Recovery) can continue to process failed batches.
Use the transaction entry windows to continue processing interrupted transactions.
The following table defines some of the recovery statuses you might encounter and the actions you must take to continue processing the batch.
Recovery status
Posting
Interrupted
Journal Printing
Interrupted
Table Updates
Interrupted
Computer Check
Posting Error
Recurring Batch
Error - Edit
Required
Transaction Error
- Edit Required
Check Processing
Interrupted
Check Voiding
Interrupted
Check Reprinting
Interrupted
Check Printing
Interrupted
Remittance
Processing
Interrupted
Check Alignment
Interrupted
Definition
Interrupted during posting of the batch
Interrupted during the journal printing phase
Interrupted during the posting cleanup phase
A posting error was found in a computer check batch
Interrupted while processing a recurring batch
Interrupted during transaction posting
Interrupted during the computer check process
Interrupted during void check processing
Interrupted while reprinting checks
Interrupted during check printing
Interrupted during remittance processing
Interrupted during the check alignment process
Actions you must take
Mark the batch and choose Continue. The batch is posted.
Mark the batch and choose Continue. The batch is posted.
Mark the batch and choose Continue. The batch is posted.
Mark the batch; the status changes to Edit
Required. Note the batch to edit and choose
Continue. The batch status changes to
Available, and you can edit and repost the batch following normal procedures.
Mark the batch; the status changes to Edit
Required. Note the batch to edit and choose
Continue. The batch status changes to
Available, and you can edit and repost the batch following normal procedures.
Mark the batch; the status changes to Edit
Required. Note the batch to edit and choose
Continue. The batch status changes to
Available, and you can edit and repost the batch following normal procedures.
Mark the batch and choose Continue. The batch is available in the Print Payables Checks window.
Mark the batch and choose Continue. The batch is available in the Post Payables Checks window.
Mark the batch and choose Continue. The batch is available in the Post Payables Checks window.
Mark the batch and choose Continue. The batch is available in the Post Payables Checks window.
Mark the batch and choose Continue. The batch is available in the Process Payables Checks window.
Mark the batch and choose Continue. The batch is available in the Print Payables Checks window.
S Y S T E M U S E R ’ S G U I D E 131
W O R K I N G W I T H M I C R O S O F T D Y N A M I C S G P
Recovery status
Check Reprint
Alignment
Interrupted
Definition Actions you must take
Interrupted during check reprint alignment process
Mark the batch and choose Continue. The batch is available in the Print Payables Checks window.
Continuing an interrupted batch
Use the Batch Recovery window to continue the posting process for interrupted batches. If the batch status column in a Batch ID lookup window, a Series Posting window, or the Master Posting window displays a status of Posting Interrupted,
Journal Printing Interrupted, or Table Updates Interrupted, you can use the Batch
Recovery window and continue the posting process from the point of interruption.
To continue an interrupted batch:
1.
Open the Batch Recovery window.
(Microsoft Dynamics GP menu >> Tools >> Routines >> Batch Recovery)
2.
Mark the batches to continue.
Any batch that didn’t complete the normal posting process is displayed in this window. For batches displaying a status of Posting Interrupted, Journal
Printing Interrupted, or Table Updates Interrupted, marking the batch changes the batch status to Marked.
3.
Choose Continue to restart the posting process at whatever point it failed in the previous posting attempt. If no posting errors are found and no further system failures occur, the marked batches are posted.
A posting journal will printed when the batch recovery process is complete, if you marked the option to print audit trail reports in the Posting Setup window.
If the batch is for printing checks, refer to
Batch posting recovery overview
on page 131 for more information about continuing the printing process.
Continuing a batch posted with errors
Use the Batch Recovery window to mark the batches containing errors for edit. If the batch status column in a Batch ID lookup window, a Series Posting window, or the Master Posting window displays a status of Recurring Batch Error - Edit
132 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 1 P O S T I N G M I C R O S O F T D Y N A M I C S G P
Required or Transaction Error - Edit Required, you can mark the batches containing errors and make them available for edit.
To continue a batch posted with errors:
1.
Open the Batch Recovery window.
(Microsoft Dynamics GP menu >> Tools >> Routines >> Batch Recovery)
2.
Mark the batches to make available for edit.
Any batch that didn’t complete the normal posting process has the status of
Recurring Batch Error - Edit Required or Transaction Error - Edit Required.
Marking the batch changes the status to Edit Required.
3.
Choose Continue to change the status of batches posted with errors to
Available.
4.
Close the Batch Recovery window. You can select, edit, and repost these batches following normal posting procedures.
A posting journal is printed when the batch posting recovery process is complete, if you marked to print audit trail reports in the Posting Setup window.
When you edit batches that originally had a batch status of Recurring Batch Error -
Edit Required in the Batch Recovery window, you can edit any transaction in the batch, even those transactions marked Posted in the transaction entry windows. Only the transactions marked Unposted within the batch are posted as a part of the batch posting process.
Interrupted transactions
Use the transaction entry windows to continue processing interrupted transactions.
Statuses aren’t assigned to interrupted transactions. When you log in to the system, a message will be displayed if a transaction-level process was interrupted.
The following situations can result from interrupted transaction processing.
Posting interrupted
Open the transaction entry window that you were posting from when the transaction was interrupted. The transaction is available for posting.
Post it or continue entering additional transactions.
Printing interrupted
Open the transaction entry window that you were printing from when the transaction was interrupted. The posting journal is printed when you close the window.
Table updates interrupted
Open the transaction entry window that you were using with the transaction was interrupted. The system finishes updating the tables that weren’t updated completely. No further action is needed.
S Y S T E M U S E R ’ S G U I D E 133
134 S Y S T E M U S E R ’ S G U I D E
Part 4: Reporting in Microsoft
Dynamics GP
This part of the documentation describes using and printing reports and using
SmartList.
It also includes information about systemwide and company reports, Word templates, samples of reports that you can view on CustomerSource, and reporting tools that you can use with Microsoft Dynamics GP.
The following topics are discussed:
•
Chapter 22, “Reporting in Microsoft Dynamics GP,” provides overview
information about reporting in Microsoft Dynamics GP.
•
Chapter 23, “Report Writer reports,”
includes information about printing standard reports in Microsoft Dynamics GP, specifying and printing report options, and creating report groups.
•
contains information about SmartList, which you can use to view and print the data stored in your system quickly and easily.
•
Chapter 25, “Word template maintenance,”
includes information about maintaining Word templates such as assigning a Word template to a company and modifying a Word templates.
•
Chapter 26, “SQL Server Reporting Services reports,”
provides overview information about SQL Reporting Services.
•
Chapter 27, “Optional ways to create or modify reports,”
describes reporting tools within Microsoft Dynamics GP that you can use to modify reports, such as
Advanced Financial Analysis and Report Writer, and other reporting tools that you can use with Microsoft Dynamics GP, such as Management Reporter for
Microsoft Dynamics ERP.
136 S Y S T E M U S E R ’ S G U I D E
Chapter 22: Reporting in Microsoft Dynamics GP
Reports provide a way for you to retrieve and present the data stored in Microsoft
Dynamics GP. The reporting tools that are included provide many ways to retrieve and present information. Additional reporting tools are available to extend the possibilities even further.
This information is divided into the following sections:
•
•
•
Types of reports
To better understand the reporting choices that are available to you, reports can be divided into several categories.
Standard Reports
Standard reports include payables or receivables aging reports; lists of customers, vendors, employees, items, and accounts; and reports that are generated during processes such as posting or printing checks. The default tool for creating or modifying reports is Report Writer. These types of reports are available from report lists or the Print button in Microsoft Dynamics GP windows.
Standard reports can be printed to a screen, file or a printer. Standard reports that are printed from the report list require you to define a ”report option“, a set of ranges and sorting choices for the report. Reports that are printed as part of accounting processes, such as transaction edit lists, don’t require an option before they can be printed. Edit lists give you the opportunity to review data and fix any mistakes before completing the next step in a process.
Ad hoc reports
Ad hoc reports include fewer printing options than standard reports, but it’s often easier and faster to display information using them. The information displayed in Inquiry windows and in SmartList views are examples of ad hoc reports. The information in Inquiry windows is intended for viewing on the screen. SmartList is a reporting tool that can help you quickly find information.
SmartList favorites are designed to be viewed on-screen, but they can be easily exported to Microsoft Word or Excel where you can format the information or perform additional calculations.
Forms
You can print information on preprinted business forms, such as checks, quotes, orders, invoices, mailing labels and billing statements. Like other types of
Report Writer reports you can modify as needed to accommodate specific layouts.
Financial statements
Financial statements are special reports created using
Advanced Financial Analysis or Management Reporter. Report writers for financial statements include the ability to display information from budgets along with actual balances for the reporting period.
Word templates
Predefined Word templates for document types such as sales quotes and purchase orders are provided for you with Microsoft Dynamics GP. The templates are based on standard reports in Microsoft Dynamics GP. You can print the predefined Word templates for your customers and vendors in each of the companies you have access to. You also can create your own template or create a template from an existing template.
S Y S T E M U S E R ’ S G U I D E 137
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
Report lists
Report lists contain a list of reports that are available for you to use. Report lists have the same general functionality as other Microsoft Dynamics GP lists and are displayed in the content pane of the Microsoft Dynamics GP application window, see
for more information.
You can access a report list from the navigation pane or from an area page in the
Microsoft Dynamics GP application window.
Each series available in the navigation pane has the following report lists.
Report list Reports that appear in the list
Microsoft Dynamics GP Reports Report Writer reports for the series. See
for more information.
Excel Reports Excel reports and Office Data Connections for the series.
Reporting Services Reports
SmartList Favorites
Other Reports
Report List
This report list appears if you specified the location of your
Excel reports using the Reporting Tools Setup window. See your System Setup Guide (Help >> Contents >> select Setting up the System) for more information.
SQL Server Reporting Services reports for the series. See
Chapter 26, “SQL Server Reporting Services reports,” for more
information.
This report list appears if you specified the location of your
Reporting Services reports using the Reporting Tools Setup window. See your System Setup Guide (Help >> Contents >> select Setting up the System) for more information. Reporting
Services metrics appear in the SQL Reporting Services Report list.
All SmartList favorites for the series. See
for more information.
Reports not included in the other report lists, such as Microsoft
Word documents for the series.
This report list appears if you specified the location of your reports using the Reporting Tools Setup window. See your
System Setup Guide (Help >> Contents >> select Setting up the
System) for more information.
All reports for the series and the reports that you’ve added to
more information.
If you open an Excel report that is stored in SharePoint from the Excel Reports list, you can choose to view that report in a web browser instead of opening up a separate instance of Excel on your computer. This allows you to quickly view the data when you do not have Excel installed on your local machine or you don’t need to work directly with an Excel worksheet. If you want to modify the data in the report, you must open it in Excel.
Refer to the Report Deployment chapter in your System Setup Guide (Help >>
Contents >> select System Setup) for more information on the integration of
Microsoft Dynamics GP and SharePoint.
138 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 2 R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
My Reports list
Add reports that you frequently use to the My Reports list to easily access them when you need them. You can add reports created from report options, SmartList favorites, SQL Server Reporting Services reports, and customized reports to the My
Reports list.
You can access your ten most used reports from the My Reports drop-down list on the Microsoft Dynamics GP toolbar or from the My Reports area on your home
page. For more information, see
Setting up My Reports on your home page
In each report options window, you can choose the My Reports button to add the report option to your My Reports list. You also can add SmartList favorites, report options, SQL Server Reporting Services reports, and customized reports to the list.
See
for more information about using lists.
S Y S T E M U S E R ’ S G U I D E 139
140 S Y S T E M U S E R ’ S G U I D E
Chapter 23: Report Writer reports
You can print hundreds of standard reports from within Microsoft Dynamics GP.
You also can create report options, which allow you to specify what information to include on reports.
You can define report groups. For instance, if you print the same set of reports each month, you can define those reports as a group, and then print the group each month.
You can choose printing destinations for reports, including a printer, a screen, a file, or any combination of these destinations. You can send reports by e-mail to others within your organization. If the report has a Microsoft Word template associated with it, you can use Word to modify your report layout.
There are several reporting tools, such as Report Writer, that you can use to create customized reports. You can use Advanced Financial Analysis to create and modify financial statements, and you also can create customized financial statements using
Management Reporter for Microsoft Dynamics ERP. For more information about reporting tools that you can use with Microsoft Dynamics GP, refer to
“Optional ways to create or modify reports.”
This information is divided into the following sections:
•
Standard Report Writer reports
•
•
•
Creating and printing combined report groups
•
Report types, destinations, and formats
•
•
Reporting multicurrency information
Standard Report Writer reports
Microsoft Dynamics GP includes hundreds of reports that you can print from within windows as you enter and post transactions, create inquiries, and enter or access information. For example, you can easily print reports that contain vendor, customer, employee, and item records. To print most standard reports, choose
File >> Print from within the window that you’re using.
The documentation for each module contains summary information about standard reports that you can print from within windows as you complete various tasks.
Refer to the documentation for that Microsoft Dynamics GP module.
Printing in Microsoft Dynamics GP is a background process—after you start printing a report, you can continue with other activities without waiting for the report to finish printing. For example, you can print an edit list, and then begin to enter transactions in a new batch while the edit list is being printed.
Report options
To print reports that contain only the information that you want to view, you can create report options. A report option is a set of printing parameters for a particular report that you have saved. To reprint the report using those parameters, you can select the option, rather than reentering each parameter. You can use the same
S Y S T E M U S E R ’ S G U I D E 141
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
report option for multiple reports, however you cannot use the same report option twice for the same report. You can create an unlimited number of report options.
You also can set up options for sending a report in an email message so you can send updated reports to the same recipients.
Each report can have several different options. You can select sorting, restriction, printing, and emailing information to specify the scope of information that will appear on a report when you print it. For many reports, you also can select to include either detailed or summary information.
Each Microsoft Dynamics GP module includes windows that you can use to create report options, and the documentation for each module includes information about the options that you can set up. For example, to create report options for system or
Specifying system and company report options
Creating report groups
You can use report groups to print a group of report options from a specific series in a single step. For example, you can create a report group containing all the financial statements and the Trial Balance, and print the group before you close a month, quarter, or fiscal year.
Before completing this procedure, you must specify report options for the reports in the group. If you modify a report option that has been added to a group, the changes to that report option automatically will be included in the option that is in the group.
For more information, refer to the documentation for the Microsoft Dynamics GP module that you’ve created report options for.
Only reports created using Microsoft Dynamics GP report options can be grouped.
Customized reports created using Report Writer can’t be added to groups.
To create a report group:
1.
Open a report group window.
(Reports >> Select a series >> Groups)
2.
Select a report category and report.
142 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 3 R E P O R T W R I T E R R E P O R T S
3.
To include a report option in a group, highlight the option and choose Insert.
You can add up to 32 report options to a single group.
4.
Choose Save to save the group.
5.
Choose Print.
Creating and printing combined report groups
You can use the Combined Report Group window to create combined report groups. Combined report groups are collections of report groups from one or more series within your system.
For example, you can create a Customer report group, composed of one or more of the report options available in the Sales Report Groups window, and a Vendors report group, composed of one or more report options available in the Purchasing
Report Groups window. You can print all report options in both report groups at the same time by creating a combined group that includes both report groups.
For more information, refer to
To create and print combined report groups:
1.
Open the Combined Report Group window.
(Reports >> Combined Group)
2.
Select a series.
3.
Select the report groups to add to the combined group and choose Insert.
4.
Repeat steps 2 and 3 for each series to include all the report groups that you want to add.
5.
Name the combined group, and then choose Save.
6.
Select the name of the combined group to print and choose Print.
Report types, destinations, and formats
When you define a report option or print a report, you can specify how the report will be generated. In the Report Destination window’s Report Type list, you can select Standard to use the Report Writer engine to generate the report. If the report has a Microsoft Word template associated with it, you can select Template to use
Microsoft Word as the layout engine.
S Y S T E M U S E R ’ S G U I D E 143
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
You can print reports to a printer, the screen, a file, or any combination of these destinations.
• If you print to the printer, the report is printed to the default printer that’s been set up for your operating system, unless the report has been assigned to a named printer. Refer to the “Printers” chapter in the System Administrator’s
Guide (Help >> Contents >> select System Administration) for more information.
• If you print to the screen, the report appears on the screen and you then can choose to print to the printer. In addition, if you’re using an e-mail system that’s compliant with MAPI (Microsoft’s Messaging Application Program Interface), you can send any report that you print to the screen in an e-mail message.
• If you print to a file, you can select one of the file formats shown in the following table.
File format
Tab-delimited
Comma-delimited
Text
HTML
XML Data
Adobe PDF
Word Document
Description
The tab-separated ASCII character format used by spreadsheet programs, such as Microsoft Excel.
The standard comma-separated ASCII character format used by database programs.
Text with no formatting. Use this option only if the application you’ll use to read the report can’t read any other format.
A format that can be views in a web browser.
A text file that contains an XML representation of the report layout and all the report data. Choose this format if you want to process the report using an external application.
This format is available if you have the PDFWriter printer driver installed (included with Acrobat 5 and earlier), or Acrobat Distiller from Acrobat 6 or later. PDF (Portable Document Format) files can be read using Adobe Reader software available from Adobe.
The Microsoft Office Open XML (.docx) file format used by Word 2007 or later. You can select this format if you select Template as the report type.
• You can select a printing destination in different ways, depending on which printing method you use.
• If you print a report by choosing File >> Print or the Print button while a window is open, the Report Destination window appears, where you can select a destination. (You can select a preferred default destination—Printer or
Screen—in the User Preferences window.)
• You can select printing options and destinations for posting journals and other reports in the Posting Setup window. You can select to be asked each time where a specific report or journal should be printed to, or you can select specific printing destinations to be used each time, such as to the screen, to a file, or to a printer.
• For analysis, history, and setup reports and posting journal reprints, you select the destination when you create the report options needed to print these reports.
144 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 3 R E P O R T W R I T E R R E P O R T S
Mailing reports
Microsoft Dynamics GP allows you to mail reports via Microsoft’s Messaging
Application Programming Interface (MAPI), if you have one of the following applications:
Operating systems
To review operating systems that use MAPI, see http:// go.microsoft.com/fwlink/?LinkId=161197 .
A MAPI-compliant mail system such as Microsoft Outlook
If you have
Outlook or another compliant mail application on your computer, you can mail reports from the Screen Output window in Microsoft Dynamics GP or Report
Writer.
There are two methods available for sending reports in an email:
• Mail a report from the Screen Output window, if you print to the screen.
• Add email options such as the email recipients and settings for embedding or attaching the report to the report option so that the report can be sent in an email message instead of printed. All reports sent using report options are sent in HTML format. Before you can set up email options, you must first create report options.
To mail a report from the Screen Output window:
If you have Acrobat Distiller or PDFWriter installed, you can mail the report in PDF format. These items can be purchased from Adobe Systems. PDF (Portable
Document Format) files can be read using the Adobe Reader software, which is available from www.adobe.com
.
1.
When the Report Destination window appears, select the Screen option.
2.
When the report appears in the Screen Output window, choose one of the following methods:
• To send the report file as an Adobe PDF file, choose the Send To >> Mail
Recipient (PDF) option. The report will be converted to a PDF file. The recipient must have Adobe Reader installed to view the report.
• To send the report file as a text file, choose Send To >> Mail Recipient. The report will be sent as a text (.TXT) attachment to the mail destination you select in the dialog box. The report’s technical name appears in the subject line of the mail application. The recipient can open it using Notepad,
WordPad, or another text editor after the attachment file has been detached from the e-mail message and saved to the hard drive.
Technical names are assigned to reports from within Report Writer. For more information, refer to your Report Writer documentation.
Text reports that are wider than the screen will be displayed only partially, but will be printed in their entirety, if the report is 255 columns wide or less, and the appropriate text report options were marked in the Report Definition window.
A dialog box appears so you can enter the e-mail address.
S Y S T E M U S E R ’ S G U I D E 145
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
3.
Enter the e-mail address and choose OK.
Adding email options to report options
1.
Open the report options window for the report to send using email.
2.
Choose Email Options. The Email Options window opens.
3.
Enter or select the email recipients in the To, Cc or Bcc fields. The email contacts window from your default email system opens if you choose any address button. Use a comma or semicolon to separate the addresses when you send reports to multiple recipients.
4.
Choose the method of including the report in your email.
Embed Reports in Message Body
Use this option to insert the actual report in the message body.
Send Reports as Attachments
Use this option to include the report as an attachment which the recipient will be required to open to view the report.
5.
Choose Message. The Report Message Setup window opens.
6.
Enter a subject for the message. If you leave the subject blank, the report name will be used for the email subject line in the recipient’s inbox.
7.
Enter the text of a message. This text will appear in the message body. If you chose to embed the report in the email message, the text you enter precedes the report.
8.
Choose Save. The Report Message Setup window will close and the Email
Options window appears.
9.
Choose OK. Once you’ve completed these steps, the Email button will be enabled in the report window, report options window and list views when you choose the report option.
To send a report option in an email
Before you can send a report option in an email, you must first create email options for the report option.
1.
Open the report window for the report to send.
2.
Select the report from the Reports list.
3.
Choose the report option and choose Insert. The report option appears in the
Email or Print list.
4.
Choose Email. The report will be sent according to the email options set up for that report option. Only one report can be sent at one time.
You can also send a report option using the report options window.
146 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 3 R E P O R T W R I T E R R E P O R T S
1.
Open the report options window for the report option to send
2.
Choose Email. The report will be sent according to the email options you set up for the report option.
To send a report in an email using the Actions pane
Only one report option can be sent in an email at one time. If you haven’t set up email options for the report, the Send in Email button will not be available.
1.
In the navigation pane, choose the module for the report, then choose the
Reports for that module. For example, choose Sales. then Sales Reports.
2.
Mark the report to send in email.
3.
In the Actions group, choose Send in Email. A Progress window will appear while the email message is generated and sent.
Reporting multicurrency information
To print multicurrency versions of your reports and posting journals, you must mark the Include Multicurrency Info option in the Posting Setup window. If that option is marked, the option to print multicurrency information is available in some report option windows.
You also can include multicurrency information on some reports by marking the option to print multicurrency information in the appropriate report option window.
For information about reports that can be printed to include multicurrency information, refer to the reports summary information in the “Reports” chapter for the Microsoft Dynamics GP module that you’re using.
S Y S T E M U S E R ’ S G U I D E 147
148 S Y S T E M U S E R ’ S G U I D E
Chapter 24: SmartList
Use SmartList to view, export, and print the data stored in your system quickly and easily. You can change the way the information is displayed to best suit your needs, and then save your inquiry to use again later. Information about using SmartList is organized in the following sections:
•
•
Searching Microsoft Dynamics GP records
•
•
•
•
•
Printing or exporting search results
•
Changing the columns displayed in a view
•
Organizing information in the SmartList window
•
•
Exporting search results to Excel or Word
•
Overview of SmartList
You can access SmartList by choosing Microsoft Dynamics GP menu >> SmartList.
You can use SmartList to create customized inquiries to provide easier, faster access to information stored in the Microsoft Dynamics GP system, including information about accounts, customers, employees, vendors, transactions, and items. You can print or export the search results, or display them on the screen.
SmartList uses sets of predefined search criteria, called favorites. The favorites are listed on the left side of the SmartList window. Some of the criteria within each
SmartList favorite are used to create a default search, or view, for each favorite. You can modify the view to create a variety of customized views. You can access a list of
SmartList Favorites that you can view, print, or modify when you select SmartList
Favorites in the navigation pane.
In addition to the favorites that are included with Microsoft Dynamics GP, a number of products that integrate with Microsoft Dynamics GP also include SmartList favorites that allow you to search data from those applications.
You can add or remove criteria—which are represented in the SmartList window as columns—from any SmartList view. There are many columns available for each view. To make the views easier to read and understand, use as few columns as possible, while still providing the information you’re looking for. You can add additional columns to a view, if necessary. The only limitation is that columns you add must be included in the favorite. Columns can be part of the favorite, yet not be visible in the default view. To learn more about adding or removing columns from
Changing the columns displayed in a view
When you add or remove columns from a SmartList view, you’re modifying only the view, not the SmartList favorite itself. SmartList favorites can’t be modified. You can save modified views to make it easier to generate the same inquiry in the future.
For example, the following illustration shows the default Customer view. The information includes customer names, customer numbers, and address information. However, there’s more information available in the SmartList favorite.
S Y S T E M U S E R ’ S G U I D E 149
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
In the following illustration, only the customer name and number have been retained from the default view. Additional columns that display each customer’s credit limit, high balance, and average days to pay have been added and the columns have been rearranged.
SmartList search results can be sent to Microsoft Excel or Microsoft Word. For example, you can search for information about your customers, export the results to
Excel, and then use Excel and Word to create promotions targeted to specific groups of customers based on how much business they do with your company, or how conscientious they are about paying their bills on time. By combining the capabilities of SmartList and Excel to organize and sort data with Word’s mail merge capabilities, you can create mass mailings that tailor your message to individual customers. Refer to Microsoft Word and Microsoft Excel documentation for more information.
SmartList search results also can be sent to the Letter Writing Assistant to help you prepare customer, vendor, applicant, and employee letters. For example, you can search for customers who have a Total Sales YTD amount greater than a specified amount. Then you can export the search results to the Letter Writing Assistant to prepare letters for those customers and thank them for their business. For more information about the Letter Writing Assistant see
Overview of the Letter Writing
Only customers with bill-to addresses will be included when you send search results to the
Letter Writing Assistant.
Searching Microsoft Dynamics GP records
Use the SmartList window to search account, transaction, customer, employee, item, and vendor records in Microsoft Dynamics GP. You can view only the records you have access to. For information about making specific SmartList favorites accessible to users, review the security information in the System Setup instructions (Help >>
Contents >> select Setting Up The System).
150 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 4 S M A R T L I S T
To search Microsoft Dynamics GP records:
1.
Open the SmartList window.
(Microsoft Dynamics GP menu >> SmartList)
2.
From the list of favorites in the left pane of the SmartList window, select the category of information to search.
3.
Choose Search. The Search window opens.
4.
In the Search window, define search criteria. See
on page 152 for more information. To see different ways that you can set up search
definitions, see
S Y S T E M U S E R ’ S G U I D E 151
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
5.
Choose OK. Your search will appear in the SmartList window. SmartList will display only the records it found up to the maximum number of records you specified in the Search window. If you stop a search while it’s processing,
SmartList will display only the records it found before you chose to stop it.
Stop button
Information displayed at the bottom of the SmartList window includes the number of records returned and a processing message. You can click on the search description at the bottom of the window to open the Search window that contains the criteria that produced the current results.
Defining search criteria
Use the Search window to revise the default view for a favorite. Search criteria doesn’t have to be included in the view displayed in the SmartList window. For example, you could search for sales items by unit price without displaying the Unit
Price field in the results.
The Search window includes the following options that can be used to refine your search results.
Field Comparison
Mark the Field Comparison check box to generate search results based on comparisons of similar types of fields. For example, you can use field comparisons to create views that show instances of customers’ finance charges exceeding their minimum payments or that lists items for which the order quantity available is smaller than the quantity that’s been back ordered. When you mark the
Field Comparison check box for a definition, you also can select a comparison type, such as less than, equal to, or greater than, and then choose a second field to compare to. You can set up a field comparison for each of the four definitions in the
Search window.
Maximum Records
Use the Maximum Records setting to limit the number of items your search returns. SmartList matches search criteria to items in work files, open files, and history files, and returns the records that most closely match the search criteria that you selected.
152 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 4 S M A R T L I S T
Search Type
Use the Search Type selections to specify whether all or some of the search definitions must be matched before a record can be displayed. For example, the Search window allows you to search data in a favorite using up to four criteria.
If you want each element of the definition to match before displaying a record, select Match All. To see a record displayed as long as it matches at least one of your search criteria, select Match 1 or More.
To define search criteria:
1.
Select the default view of a favorite in the SmartList window.
(Microsoft Dynamics GP menu >> SmartList)
2.
Choose Search from the toolbar.
3.
Within the Search window, enter up to four search criteria. In the first line, enter or select a field. Select a restriction type, such as contains, begins with, or is greater than. Mark Field Comparison to compare one field to another. Then define the restriction type in the text box at the right. Mark the Match Case check box, if applicable.
4.
Select search options.
5.
Choose the Columns button to arrange the way that columns are displayed.
6.
Choose OK to process the search. Your results will appear in the SmartList window.
SmartList favorites
SmartList includes predefined searches, called favorites. You can view search results for favorites or modify them. You also can create additional favorites.
When you select a favorite, search results are displayed in the SmartList window; the results can be sorted by any of the columns included in the favorite. You can select a favorite and choose Search in the SmartList window to open a window where you can modify the search criteria for the favorite.
S Y S T E M U S E R ’ S G U I D E 153
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
Favorites with an asterisk beside them are default favorites that came with
Microsoft Dynamics GP.
You also can open the Search window by clicking the search criteria description displayed at the bottom of the SmartList window.
Creating SmartList favorites
Use SmartList, the Search window, and the Add or Remove Favorites window to create a SmartList favorite using the search criteria that you specify. You must select an existing favorite to use as a starting point for the favorite you’re creating. You also can create a customized reminder for the favorite that you are creating. For more information, see
The search window includes four search definitions that you can use to define the search criteria for a favorite. The following table explains the ways you can set up search definitions.
Option
Filter using keywords
Compare values
Description
Select a column name and one of the following filtering options:
“contains”
“is equal to”
“begins with”
“is between”
“is not equal to”
“is greater than”
“is less than”
Enter a value in the Value field.
If you selected the “is between” option, enter a value in each
Value field.
Mark the Match Case option to make the filter case sensitive.
Select a column name and select Field Comparison.
Select a column name and one of the following filtering options.
“contains”
“is equal to”
“begins with”
“is between”
“is not equal to”
“is greater than”
“is less than”
If you selected the “is between” option, select a column name in each Value field.
Mark the Match Case option to make the filter case sensitive.
154 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 4 S M A R T L I S T
To create SmartList favorites:
1.
Open the SmartList window.
(Microsoft Dynamics GP menu >> SmartList)
2.
Select a favorite from the left pane to use as a starting point. The search results will open in the right pane of the window.
3.
Choose Search to open the search window, where you can modify search criteria for the favorite.
You can complete the following actions.
• Enter search definitions.
• Enter the maximum number of records to include in the results.
• Select the search type to specify whether all or some of the search definitions must be matched before a record can be displayed.
• Choose Columns to open the Change Column Display window to add, remove, or rearrange the columns of data that will open in the search results for the favorite.
Changes made using the Change Columns Display window are only for the SmartList favorite that you are currently viewing. These changes will not affect any other favorites.
4.
Choose OK. The search results will open in the right pane of the SmartList window. The number of records returned, a processing message, and a description of the search criteria are displayed at the bottom of the SmartList window.
5.
In the SmartList window, choose Favorites to open the Add or Remove
Favorites window.
6.
Enter a name for the favorite.
7.
Select an option from the Visible To field to indicate who can view this favorite.
8.
Choose Add and complete one of the following actions.
• To create a customized reminder for this SmartList favorite, select Add favorite and reminder. The Custom Reminders window will be displayed.
See
on page 110 to finish creating a
customized reminder.
The Add or Remove Favorites window will close, and the new favorite will appear in the SmartList window.
• To finish creating a SmartList favorite without creating a customized reminder, select Add favorite. The Add or Remove Favorites window will close, and the new favorite will appear in the SmartList window.
9.
Close the SmartList window.
S Y S T E M U S E R ’ S G U I D E 155
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
Deleting SmartList favorites
Use the Add or Remove Favorites window to delete a SmartList favorite.
Favorites with an asterisk beside them are default favorites that came with
Microsoft Dynamics GP. You can’t delete or modify default favorites.
To delete SmartList favorites:
1.
Open the SmartList window.
(Microsoft Dynamics GP menu >> SmartList)
2.
In the left pane of the SmartList window, select the favorite to delete.
3.
Choose Favorites to open the Add or Remove Favorites window.
4.
In the Add or Remove Favorites window, choose Remove. The Add or Remove
Favorites window will close and the favorite no longer will be displayed in the left pane of the SmartList window.
5.
Close the SmartList window.
Printing or exporting search results
Use the SmartList Print Options window to print search results or export them to a file. The printed results will have an appearance similar to the results displayed in the SmartList window.
To print or export search results:
1.
With the search results displayed in the SmartList window, open the SmartList
Print Options window.
(File >> Print)
2.
Choose where to print the report to.
• To print your report to the screen, mark Print and then mark Screen.
• To print your report on paper, mark Print and then mark Printer.
• To print your report on paper and to the screen, mark Print and then mark both Printer and Screen.
3.
To save the information to a report file, mark Export and choose the file lookup button to select a destination file.
To learn about exporting search results to Excel or Word, see
Exporting search results to Excel or Word
156 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 4 S M A R T L I S T
4.
Choose OK.
Changing the columns displayed in a view
Use the Change Column Display window to add and remove columns, rename them, and change their positions.
To change the columns displayed in a view:
1.
With the search results displayed in the SmartList window, choose Columns to open the Change Columns Display window.
2.
Enter a new display name to change the name of a column.
3.
Make any or all of the following changes:
• Add a column to the display by choosing Add. The Columns window will open. Select the item to display.
• Select a column to remove and choose Remove.
• Move a column to a different position in the list by selecting the column to move, then using the arrow buttons to resposition it.
• To redisplay the default columns, choose Default in the Change Column
Display window.
4.
Choose OK to close the Change Column Display window. The SmartList window will reflect your changes.
Organizing information in the SmartList window
There are several ways to organize your search information in the SmartList window.
Folders representing the search categories appear on the left side of the window. To view the contents of a folder in the folder list, select the plus sign beside the folder; to hide the contents of a folder, select the minus sign. When you select a search, its contents appear on the right.
To adjust column width, move the pointer to the right border of the column heading. When the pointer becomes a double-headed arrow, drag the border to the desired position. You also can double-click the right border to make the column automatically adjust to fit its contents.
S Y S T E M U S E R ’ S G U I D E 157
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
To sort items based on a field, click the column heading to sort by. For example, to sort by Customer ID, click the Customer ID heading. Right-click on the column heading to sort in ascending or descending order. Clicking a column heading a second time also will change the sorting order. In the SmartList window, the column that is being used to sort is indicated along with the direction it is sorted. In the following example, the information in the Smartlist is being sorted by the customer name in an ascending order.
Sort indicator
Creating export solutions
Use the Export Solutions window to create an export solution. Export solutions allow you to export search results to a template and run Excel or Word macros before or after exporting.
To create export solutions:
1.
Open the Export Solutions window.
(With SmartList open choose SmartList >> Export Solutions)
2.
Enter a name for the export solution.
3.
In the Document field, enter the path to the file containing the template that you want to use, or choose the file lookup button to locate the file.
4.
Enter the preparation macro—that is, the macro that you want to run before exporting to Excel or Word. For example, you could use a preparation macro to clear data out of a pivot table in Excel before exporting.
To run a macro after exporting to Excel or Word, enter the completion macro name.
5.
Select the users that this export solution should be visible to.
6.
Select the application to export to—Word or Excel.
158 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 4 S M A R T L I S T
7.
Expand an object in the Works for Favorites list and mark the box next to the favorite that you want to use the export solution for.
8.
Choose Save to save the export solution.
To delete an export solution, select it and choose Delete.
Choose New to clear the fields in the Export Solutions window. Then you can enter data to create a new export solution.
To learn more about exporting your search results, see
Exporting search results to Excel or Word
Use the SmartList window to export search results to a Microsoft Excel spreadsheet or to a Microsoft Word table.
To export search results to Excel or Word:
1.
Be sure that the results to export are displayed in the SmartList window.
2.
Choose the Excel button or the Word button on the toolbar.
If you have created an export solution to format your search results, choose the
Excel or Word button to open a list of export solutions. Choose the Quick Export option to generate a spreadsheet or table automatically from your list of export solutions.
If you haven’t created an export solution, choose the Excel or Word button to generate a spreadsheet or table automatically. Column names in the spreadsheet or table correspond to column names in SmartList.
To learn more about creating export solutions, refer to
Setting up SmartList options
Use the SmartList Options window to select SmartList default settings that determine which columns are visible for specific SmartList favorites.
S Y S T E M U S E R ’ S G U I D E 159
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
To set up SmartList options:
1.
Open the SmartList Options window.
(Microsoft Dynamics GP menu >> Tools >> Setup >> System >> SmartList
Options)
2.
Select the category to designate default options for.
3.
For each category, select a default Go To window and set the maximum number of records that you want a search to return.
4.
For each category, select the columns to be displayed in the SmartList window by marking the check boxes. Change their order by selecting a column and using the move buttons to move it up or down. Choose Default to restore the original settings.
5.
Specify the default settings for search case sensitivity.
6.
Choose OK to save your changes.
160 S Y S T E M U S E R ’ S G U I D E
Chapter 25: Word template maintenance
Predefined Word templates for document types such as sales quotes and purchase orders are provided for you with Microsoft Dynamics GP. The templates are based on standard reports in Microsoft Dynamics GP. You can print the predefined Word templates for your customers and vendors in each of the companies you have access to. You also can create your own template or create a template from an existing template.
A template must be assigned to a company before it can be printed or assigned to customers or vendors. The template assigned to a vendor or customer is the report printed for that specific vendor or customer. For example, if you have classes for your customers in the United States and in Canada, you can assign Word templates to your customers based on those classes
Using the Report Template Maintenance window, you can add, remove, modify, copy, and rename templates, and modify assignments. You can't delete or modify predefined Word template. Refer to Report Writer documentation for details about designing and modifying the Word template.
The following information is discussed.
•
Assigning a template to a company or companies
•
Assigning a default template to a report
•
Assigning a Word template to customers
•
Assigning a Word template to vendors
•
•
•
•
Removing a template from a company assignment
•
Removing a template assignment from customers
•
Removing a template assignment from vendors
•
Assigning a template to a company or companies
A template must be assigned to a company before it can be printed or assigned to customers or vendors. Use the Company Assignment window to assign a Word template to one or more companies.
To assign a template to a company or companies:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name or select More Reports to open the Reports window.
3.
Select a template in the Available templates for the selected report list.
S Y S T E M U S E R ’ S G U I D E 161
P A R T 4 R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
4.
Choose Company in the Assign menu to open the Company Assignment window.
5.
Mark the company or companies for which you want this template to be used.
6.
Choose Save.
Assigning a default template to a report
Use the Default Assignment window to a for assign a default Word template to a company. You must have one default template assigned to a standard report.
Predefined Word templates provided with Microsoft Dynamics GP are assigned to all companies that you have access to. If you created a new template, Purchase
Order template for example, and don't assign it to a company, the predefined POP
Purchase Order Blank Form template is assigned to the company.
To assign a default template to a report:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name or select More Reports to open the Reports window.
3.
Select the template in the Report Template Maintenance window.
4.
In the Assign menu, choose Company to display the Company Assignment window.
162 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 5 W O R D T E M P L A T E M A I N T E N A N C E
5.
Select the company in the list for which you are setting the default template, and then click Set Default.
6.
In the Default Assignment window, mark one of the templates that has been assigned to that company. Choose Save.
If you are setting the default template for multiple companies, you can choose
Apply. The window clears and you can select another company to assign a default template for.
Assigning a Word template to customers
Use the Customer Assignment window to assign a Word template to an individual customer or to a group of customers by selecting customers by customer IDs and customer classes. For example, if you have classes for your customers in the United
States and in Canada, you can assign Word templates to your customers based on those classes.
If you created a new template, a SOP Invoice template for example, and don't assign it to a customer, the predefined SOP Blank Invoice template is assigned to the customer. Only one template can be assigned to a customer. If a customer has a template assigned to it and you assign a different template, the customer is updated with the new template.
If customer IDs and customer classes aren't displayed in the Customers assigned to this template list, you can assign groups of customer IDs and customer classes to the template by using the Add Customers window.
To assign a Word template to customers:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Select a template in the Available templates for the selected report list.
S Y S T E M U S E R ’ S G U I D E 163
P A R T 4 R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
4.
In the Assign menu, choose Customer to open the Customer Assignment window.
5.
If customer IDs and customer classes aren't displayed in the Customers assigned to this template list, choose the Add button to open the Add
Customers window.
6.
Select to add customers by customer class or customer ID.
7.
Specify which customers or customer classes to included in the range.
8.
Choose Insert to insert the range you’ve selected in the Restrictions List.
You can enter a single range or enter multiple ranges. For example, you can enter a customer class range for local customers, a range of customer IDs from
100 to 300, and a range of customer IDs from 500 to 800. A range can be an individual customer.
9.
Repeat steps 6 through 8 until you entered the ranges you wanted.
10. Choose OK to return to the Customer Assignment window.
The customers IDs and customer classes you selected in the Add Customers window appear in the Customers assigned to this template list.
You can mark the check box next to each customer ID or customer class to remove the customer ID or customer class assignment from the Word template.
11. Choose Save.
164 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 5 W O R D T E M P L A T E M A I N T E N A N C E
Assigning a Word template to vendors
Use the Vendor Assignment window to assign a Word template to vendors by selecting vendor IDs and vendor classes. If you created a new template, a POP
Purchase Order Blank Form template for example, and don't assign it to a customer, the default POP Purchase Order Blank Form template is assigned to the vendor.
Only one template can be assigned to a vendor. If a vendor has a template assigned to it and you assign a different template, the vendor is updated with the new template.
If vendor IDs and vendor classes aren't displayed in the Vendors assigned to this template list, you can assign groups of vendor IDs and vendor classes to the template by using the Add Vendors window.
To assign a Word template to vendors:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Select a template in the Available templates for the selected report list.
4.
In the Assign menu, choose Vendor to open the Vendor Assignment window.
5.
If vendor IDs and vendor classes aren't displayed in the Vendors assigned to this template list, choose the Add button to open the Add Vendors window.
6.
Select to add a vendor or vendors by vendor class or vendor ID.
7.
Specify which vendors or vendor classes to included in the range.
S Y S T E M U S E R ’ S G U I D E 165
P A R T 4 R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
8.
Choose Insert to insert the range you’ve selected in the Restrictions List.
You can insert multiple ranges of each type into the Restrictions list. For instance, you enter a range specifying that vendor IDs 100 through 300 can be added and enter another restriction for vendor IDs 500 through 800. A range can be an individual vendor.
9.
Repeat steps 6 through 8 until you entered the ranges you wanted.
10. Choose OK to return to the Vendor Assignment window.
The vendors IDs and vendor classes you selected in the Add Vendors window appear in the Vendors assigned to this template list.
You can mark the check box next to each vendor ID or vendor class to remove the vendor ID or vendor class assignment from the Word template.
11. Choose Save.
Modifying a Word template
Use the Report Template Maintenance window to modify Word templates. You can’t modify the default Word templates that are provided with Microsoft
Dynamics GP. You can make copy of a predefined template to make your changes to. Refer to Report Writer documentation for details about designing and modifying the Word template.
To modify a Word template:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Highlight the template you want to modify.
4.
Choose Modify to open the Word template in Microsoft Word.
5.
Make your changes in Word.
6.
Save the template file when you have finished making changes in Word. Note the location and the name of the file.
7.
Close the template in Word.
8.
After saving the template, you must add the template to the Available templates for the selected report list in the Report Template Maintenance window. For more information, see
.
Adding a template
After you create or modify a template, you must add—import—the template to the
Available templates for the selected report list in the Report Template Maintenance window.
166 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 5 W O R D T E M P L A T E M A I N T E N A N C E
The Word template must be based on a standard report. The standard report’s layout should be complete and the report should run correctly.
To add a template:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Select a template in the Available templates for the selected report list.
4.
Choose the Add button to open a window where you can locate the modified template.
5.
After you locate the template, choose Open to add the template to the list of assigned templates for the selected standard report.
6.
If a message appears, stating that the template already exists, choose Yes.
7.
After the template is added, be sure to assign the template to your companies, customers, or vendors if necessary.
Renaming a template
You can use the Report Template Maintenance window to rename a Word template.
You can’t rename a Word template that is a default template.
If a template is assigned to multiple companies and you want only a specific company to use the template, change the name of the template and assign the template to that specific company.
To rename a template:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select the template in the Report Template Maintenance window.
3.
Choose the Rename button.
4.
Enter a name in the dialog window and choose OK.
Removing a template from a company assignment
If you don’t want to use a template for a company, remove the company assignment. For example, if you don't want to use a predefined template, remove the assignment to the company and select a new default Word template.
To remove a template from a company assignment:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Select a template in the Available templates for the selected report list.
S Y S T E M U S E R ’ S G U I D E 167
P A R T 4 R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
4.
Choose Company in the Assign menu to open the Company Assignment window.
5.
Unmark the company or companies you want to remove the template from.
6.
Choose Save.
Removing a template assignment from customers
Use the Customer Assignment window to remove customers from a template. If you’ve assigned a template called SOP Blank Invoice Local Customers and then removed the assignment, the default SOP Blank Invoice template is assigned to the customer.
To remove a template assignment from customers
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Select a template in the Available templates for the selected report list.
4.
In the Assign menu, choose Customer to open the Customer Assignment window.
5.
The customer IDs and customer classes assigned to the template are displayed in the Customers assigned to this template list.
6.
Mark the customer IDs and customer classes to remove from this template.
7.
Choose the Remove button to remove from the Customers assigned to this template list.
Removing a template assignment from vendors
Use the Vendor Assignment window to remove vendors from a Word template. If you’ve assigned a template called Purchase Orders Local Vendors and then removed the assignment, the default POP Purchase Order Blank Form template is assigned to the vendor.
To remove a template assignment from vendors:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Select a template in the Available templates for the selected report list.
4.
In the Assign menu, choose Vendor to open the Vendor Assignment window.
5.
The vendor IDs and vendor classes assigned to the template are displayed in the Vendors assigned to this template list.
6.
Mark the vendor IDs and vendor classes to remove from this template.
168 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 5 W O R D T E M P L A T E M A I N T E N A N C E
7.
Choose the Remove button to remove from the Vendors assigned to this template list.
8.
Choose Save.
Removing a template
If you aren’t using a template, you can use the Report Template Maintenance window to remove a Word template from the Available templates for the selected report list. The template file is not deleted. You will have to delete the template file from the location where it's stored.
You can't remove a default template.
To remove a template:
1.
Open the Report Template Maintenance window.
(Reports >> Template Maintenance)
2.
Select a report name.
3.
Select a template in the Available templates for the selected report list.
4.
Choose the Remove button.
If you have companies, customers, or vendors assigned to the template you are removing, those assignments will use the default template.
S Y S T E M U S E R ’ S G U I D E 169
170 S Y S T E M U S E R ’ S G U I D E
Chapter 26: SQL Server Reporting Services reports
Use the Microsoft SQL Server Reporting Services reports that are included with
Microsoft Dynamics GP or use SQL Server Reporting Services tools to create new reports.
This information is divided into the following sections:
•
SQL Server Reporting Services overview
•
•
SQL Server Reporting Services overview
SQL Server Reporting Services is a server-based reporting platform that you can use to create and manage tabular, matrix, graphical, and free-form reports that contain data from relational and multidimensional data sources. The reports that you create can be viewed and managed over a World Wide Web-based connection or a
SharePoint site if you are using SQL Server 2008 or SQL Server 2008 R2 Reporting
Services. Reporting Services includes the following core components:
• A complete set of tools that you can use to create, manage, and view reports.
• A Report Server component that hosts and processes reports in a variety of formats. Output formats include HTML, PDF, XML, Excel, CSV, and more.
• An API that allows developers to integrate or extend data and report processing in custom applications, or create custom tools to build and manage reports.
Microsoft Dynamics GP contains a number of predefined SQL Server Reporting
Services reports for you to use. SQL Server Reporting Services integration must be set up for you to see the list of SQL Server Reporting Services reports in your
Reporting Services Reports lists. See your System Setup Guide (Help >> Contents
>> select System Setup) for more information about setting up Microsoft Dynamics
GP to integrate with SQL Server Reporting Services.
You must be using SQL Server 2005 Service Pack 2, SQL Server 2008, or SQL Server 2008
R2 in order to use SQL Server Reporting Services (and the predefined reports included with
SQL Server Reporting Services) in Microsoft Dynamics GP.
Report Designer
Report Designer is a report design tool that runs in Microsoft Business Intelligence
Development Studio. To use it, you should know how to connect to a data source, build queries, and set properties. You can use Report Designer to create simple reports, or complex reports that include expressions and custom assemblies to support custom functionality. You can use the Report Wizard to create a report and then modify it, or build one from the ground up.
Refer to your SQL Server 2005, SQL Server 2008 or SQL Server 2008 R2 documentation for more information about Report Designer.
S Y S T E M U S E R ’ S G U I D E 171
P A R T 4 R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
Report Builder
SQL Server Reporting Services includes Report Builder, an ad-hoc reporting tool that enables you to create your own reports and explore data. Report Builder incorporates a user-friendly business query model that enables you to build reports without deep technical understanding of the underlying data sources.
The Report Builder interface is built on top of familiar Microsoft Office paradigms such as Excel and PowerPoint. You’ll start with report layout templates containing predefined data regions to build combinations of tables, matrices, and charts. Then navigate the reporting model to select report items and set constraints to filter the report data. The reporting model contains all of the necessary information for the
Report Builder to automatically generate the source query and retrieve the requested data. The Report Builder also allows you to:
• Add text and formatting to reports.
• Create new fields and calculations defined against the reporting model.
• Preview, print and publish reports.
• Explore data related to the content of their report.
• Modify existing SQL Server Reporting Services reports that were built using
Report Builder.
Refer to your SQL Server 2005, SQL Server 2008 or SQL Server 2008 R2 documentation for more information about Report Builder.
172 S Y S T E M U S E R ’ S G U I D E
Chapter 27: Optional ways to create or modify reports
There are several reporting tools that you can to use access your Microsoft
Dynamics GP data and to customize the format of the way the information is presented. For instance, you can modify the format of checks, invoices, sales documents.You also can customize some reports provided with Microsoft
Dynamics GP or create new ones.
Advanced Financial Analysis and Report Writer are reporting tools that are included with Microsoft Dynamics GP. Other tools, such as Management Reporter, are available to help you create reports that display data stored in Microsoft
Dynamics GP. You also can create financial statements tailored to your business.
This information describes some of the reporting tools that are available to use with
Microsoft Dynamics GP and what you can do with them. Some of the tools described here are available if you are using Microsoft Dynamics GP Business
Portal.
•
•
Report Scheduler and Reports Catalog
•
•
•
Financial Reporting using Management Reporter
•
Business Portal key performance indicators
•
•
Advanced Financial Analysis
Advanced Financial Analysis is a basic reporting tool that you can use to create and modify financial statements. It is included when you purchase Microsoft Dynamics
GP, so it’s economical to use if you don’t have extensive reporting needs.
The four standard financial statements created in Microsoft Dynamics GP—Balance
Sheet, Profit and Loss Statement, Statement of Retained Earnings, and Statement of
Cash Flows—can be modified using Advanced Financial Analysis. You also can create your own custom reports.
For more information, refer to your Advanced Financial Analysis documentation.
Report Scheduler and Reports Catalog
Report Scheduler is installed automatically when you install Microsoft Dynamics
GP. It allows flexible, secure scheduling and publishing of your Report Writer reports. To add reports, you will need to start the Report Scheduler and publish reports to the Reports Catalog, where you can manage information about current and prior published reports.
If you are using Business Portal, you also can assign reports to Business Portal center pages and roles.
For more information, refer to the Report Scheduler guide that’s included on your
Microsoft Dynamics GP installation media.
S Y S T E M U S E R ’ S G U I D E 173
R E P O R T I N G I N M I C R O S O F T D Y N A M I C S G P
Distributed Process Server
If you are using the Distributed Process Server (DPS), you can choose whether to process some reports on your computer or send them to a designated process server on the network. Sending long reports to a process server allows you to continue working while the reports are being created. You must have the Distributed Process
Server registered and set up before you can use this option. Refer to the System
Administrator’s Guide (Help >> Contents >> select System Administration) for more details.
Microsoft Excel
You can use Microsoft Excel with Microsoft Dynamics GP in a number of ways to view and modify your report data. You can print virtually any Microsoft Dynamics
GP report to a variety of file formats, including a comma-separated values (CSV) file that you can open and analyze in Excel.
Build budgets within General Ledger
You can use the features of both Microsoft Dynamics GP and Microsoft Excel to create and maintain budgets within General Ledger. You can create and modify budgets, export them to Excel, or import them to Microsoft Dynamics GP.
For example, you can start building your budget in Microsoft Dynamics GP based on your account framework, then export the budget to Excel to add formulas and explore forecasting scenarios. Finally, you can import the budget into Microsoft
Dynamics GP to be used in the accounting system.
Refer to your General Ledger documentation for information about format requirements for creating budget worksheets in Excel.
Analyze SmartList data
You can use SmartList to create queries to find customer, vendor, general ledger, inventory, and employee information, and then export the information to Excel.
Data is formatted automatically and appropriately when you export it to Excel, so the information is easy to obtain.
When you’re looking at data that you’ve exported to Microsoft Excel, You can experiment with different scenarios and apply macros, filters, and formatting to the data that you’ve exported to Excel.
For more information, refer to
Access data using the Data Connection wizard
If you are using Business Portal, the Data Connection wizard in Excel makes it easy to access data stored in an external source, such as Microsoft SQL Server. In Excel, a data source link to the Microsoft Dynamics GP database is already included, saving you the effort and time needed to complete this setup.
A wizard interface makes it easy to specify the Business Portal query that will be run in Excel. You can use query pages and result viewer Web Parts in Business
Portal to create customized queries that provide access to information stored in
Microsoft Dynamics GP, including information about customers, vendors, transactions, and items. You can save and rerun frequently used queries rather than create them each time.
174 S Y S T E M U S E R ’ S G U I D E
C H A P T E R 2 7 O P T I O N A L W A Y S T O C R E A T E O R M O D I F Y R E P O R T S
For more information about using the Data Connection wizard, refer to your
Microsoft Excel documentation.
Financial Reporting using Management Reporter
If you need more extensive financial reporting than what Advanced Financial
Analysis can provide, you can use Management Reporter to create customized financial statements from your general ledger. You also can use Management
Reporter to extract information from your general ledger and combine it with information from an Microsoft Excel spreadsheet.
Reports that you create using Management Reporter can be viewed, printed, sent by e-mail, or exported to a text or spreadsheet file.
For more information, refer to your Management Reporter documentation.
Business Portal key performance indicators
A key performance indicator (KPI) is a business metric, such as your company’s total sales or gross profit margin. If you are using Business Portal, you can use KPIs and metrics created using SQL Server 2008 Reporting Services.
For more information, refer to your Business Portal documentation.
Business Portal queries
If you are using Business Portal, you can use query pages and result viewer Web
Parts in Business Portal to create customized queries that provide access to information stored in your Microsoft Dynamics GP system, including information about customers, vendors, transactions, and items. You can export query page results to Microsoft Excel, as well as display them on the screen.
For more information, refer to your Business Portal documentation.
Analysis Cubes
You can use Microsoft Analysis Cubes to analyze and report financial data and share information across your organization. One advantage of using Analysis
Cubes is that you can customize report packages that include only the information that is relevant for each recipient.
For more information, refer to your Microsoft Dynamics GP Analysis Cubes documentation.
S Y S T E M U S E R ’ S G U I D E 175
176 S Y S T E M U S E R ’ S G U I D E
Index
A
action pane
Add External Shortcut window
creating external shortcuts 65
Add Macro Shortcut window
creating shortcuts to macros 64 displaying 64
Add SmartList Favorite Shortcut window
creating shortcuts to SmartList favorites 63 displaying 63
Add Web Page Shortcut window
creating shortcuts to web pages 65 displaying 65
Add Window Shortcut window
creating shortcuts to Microsoft
Analysis Cubes, using with Microsoft
audit trail codes
audit trails
AutoComplete
described 57 inactivating 57 modifying options 57 removing all entries 57
AutoComplete Setup window
modifying AutoComplete options 57
B
batch posting
continuing batches posted with errors
132 continuing interrupted batches 132
recovery overview 131 recovery statuses 131
Batch Recovery window
continuing batches posted with errors
132 continuing interrupted batches 132 displaying 132
batches
continuing batches posted with errors
132 continuing interrupted batches 132
posting batches within a series 129
posting individual batches 128 posting methods 128
recovering 131 recovery statuses 131
budgets, building with Microsoft Excel
Business Analyzer
assigning reports to contacts 31
selecting to display reports 29
Business Portal queries, using with
C
cards
accessing 93 entering information 93
entering Internet information 94
Change Columns Display window
changing columns displayed in a view 157 displaying 157
Change Icon window
changing command icons 19 displaying 19
Change Name window
changing command names 19 displaying 19
changes since last release, information about 4
Checklist windows, described 54
columns
157 removing from SmartList search results 157
Combined Report Group window, displaying 143 combined report groups 143
Communicator
action for Business Analyzer 87
companies, automatically logging in 12
Company Login window
automatically logging in to a company 12 displaying 12 logging in to Microsoft Dynamics GP
Connect on home pages, described 35
copy report image, report action 28
Cross-Reference Report Options window
displaying 125 printing audit trail reports 125
Cross-Reference Report window
displaying 125 printing audit trail reports 125
Custom Reminder window, displaying
Customize Home Page window, displayed 38
D
Data Connection wizard, using with Excel
dates, changing the user date 58
destinations, specifying a default report destination 55
Detail Inquiry window
performing audit trail inquiries 121
display, changing how Microsoft
Dynamics GP looks on your computer
Distributed Process Server, processing reports 174
documentation
finding specific information 8 help 8
overview 7 printable manuals 7 printing manuals in PDF format 7
E
Export Solutions window
creating export solutions 158 displaying 158
F
favorites
creating SmartList favorites 154
S Y S T E M U S E R ’ S G U I D E 177
I N D E X
fields
Filter options
G
H
help
Help menu
home page role
home pages
changing your home page role 38
customizing the Metrics area 39
customizing the Microsoft Office
customizing the My Reports area 41
customizing the Quick Links area 42
Microsoft Office Outlook area 36
selecting your home page role 37
horizontal scrolling arrows, displaying 55
I
information pane
inquiries
accessing information using inquiry windows 119
performing audit trail inquiries 121
installation instructions, accessing on the
integration, system integration 11
Internet information, entering 94
Internet Information window
entering Internet information 94
entering messenger addresses 88
K
key performance indicators (KPIs), using with Microsoft Dynamics GP 175
keyboard shortcuts
menu bar shortcuts 69 toolbar shortcuts 69
tools shortcuts 70 window navigation shortcuts 70
L
Letter Writing Assistant
overview 79 preparing letters 79
setting security for Human Resources reports 79 starting the wizard 79 using SmartList results 79
list views
lists
displaying with Business Analyzer 31
exporting results to Microsoft Excel
logins
automatically logging in to a company 12 automatically logging in to Microsoft
Dynamics GP 12 logging in to Microsoft Dynamics GP
lookup window
Lync
action for Business Analyzer 87
M
Macro Insert Pause window
recording a data entry step 116
macros
macros (continued)
recording data entry steps 116
Management Reporter, using with
manuals
copying sections of text to modify 8 finding specific information 8
using bookmarks 8 using electronic manuals 8 using links 8
MapPoint
displaying maps 83 inactivating 83 overview 83 setting up 83 maps, displaying using MapPoint 83
Master Posting window
displaying 130 posting using master posting 130
maximum records, setting in SmartList
menu bar, keyboard shortcuts 69
menus, using the Go To menu 120
messenger address, SIP address 88 messenger addresses, entering 88
metrics on home pages
Microsoft Dynamics GP
automatically logging in to 12 logging in to 12 quitting 12
Microsoft Dynamics GP menu, described
Microsoft Dynamics GP search, overview
Microsoft Excel
analyzing SmartList data 174 building budgets 174
exporting SmartList search results to
using for Microsoft Dynamics GP reports 174 using the Data Connection wizard
Microsoft Office Outlook area on home pages, customizing 40
178 S Y S T E M U S E R ’ S G U I D E
I N D E X
Microsoft Office Outlook Details window, displaying 40
modules, integration benefits 11
My Reports area on home pages
My Reports list, described 139
N
navigation
navigation pane
overview 15 navigation pane buttons, described 15
Navigation Pane Options window
changing the order of series buttons
new features, information about 4
O
P
personalizations
action pane 26 columns 26 described 26 filter options 26 information pane 26 sort order 26
posting
continuing batches posted with errors
132 continuing interrupted batches 132
posting journals, used with audit trail codes 123
presence, Unified Communications 85
Presence button, displaying 86
primary report area, described 27
print options window, in SmartList 156
product documentation, accessing on the
Q
quick export
to Excel from SmartList 159 to Word from SmartList 159
Quick Links Details window, displaying
Quick Links on home pages
R
records
setting maximum in SmartList 152
Recurrence window
Reminder Preferences window
setting up predefined reminders 109
reminders
creating customized reminders 110
setting up predefined reminders 109
Reminders window
acting on reminders 112 displaying 112
report actions
add contact to report 28 change date 28 copy report image 28 described 28 edit report 28
select other contact 28 show report information 28 start communication 28 view report 28
report groups
report options in Microsoft Dynamics GP, described 141
report slide show, described 28
Report Template Maintenance window,
reporting tools
Advanced Financial Analysis 173
Business Portal key performance indicators 175
Distributed Process Server 174
reporting tools (continued)
queries in Business Portal 175
SQL Server Reporting Services 171
using with Microsoft Dynamics GP
reports
displaying in Business Analyzer 29
e-mailing with MAPI 144 file formats 144
financial statements 137 forms 137
list of Microsoft Dynamics GP system and company reports 97
printing audit trail reports 125
printing multicurrency versions 147
printing to a file 143 printing to a printer 143 printing to the screen 143
reloading in Business Analyzer 32
specifying a default report destination 55
user settings in Business Analyzer 29
S
sales documents, specifying the default type 55
scrolling arrows, displaying 55
scrolling windows, described 50
search criteria
defining SmartList search criteria 152
Search window
searching Microsoft Dynamics GP records 150
searches
S Y S T E M U S E R ’ S G U I D E 179
I N D E X
searches (continued)
changing columns in SmartList search results 157
creating SmartList favorites 154
deleting SmartList favorites 156
exporting SmartList search results
matching criteria in SmartList 153
secondary report area, described 28
Select Home Page window, displayed 37
series
posting batches within a series 129
shortcut keys
tools shortcuts 70 window navigation 70
Shortcut Properties window
creating custom keyboard shortcuts
shortcuts
creating external shortcuts 65
creating SmartList shortcuts 63
creating web page shortcuts 65
custom keyboard shortcuts 67 deleting shortcuts and folders 67
show report information, report action 28
SmartList
changing columns in search results
searching Microsoft Dynamics GP records 150 sending search results to the Letter
setting maximum number of records
SmartList (continued)
setting options 159 using the Excel button 159 using the Word button 159
SmartList data, analyzing with Microsoft
SmartList favorites
SmartList Options window
setting up SmartList options 159
SmartList Print Options window
displaying 156 printing search results 156
SmartList window
searching Microsoft Dynamics GP records 150
source document codes, defined 122 source documents, codes 122
SQL Server Reporting Services
Report Designer 171 using with Microsoft Dynamics GP
start communication, report action 28
system requirements, accessing on the
T
Task List window
displaying 109 viewing the task list 109
Task window
creating recurring tasks 107 displaying 107
tasks
acting on for Workflow feature 77
creating 107 creating recurring tasks 107
viewing for Workflow feature 77
viewing tasks 109 viewing the task list 109
templates
To Do area on home pages
To Do area on home pages (continued)
To Do Details window, displaying 43
Toolbar Customization window
toolbars
changing command icons 19 changing the order of commands 19
Microsoft Dynamics GP toolbars 17
renaming commands 19 resetting 19
transactions, individual transactions 101
U
Unified Communications
Communicator action for Business
Communicator actions for Microsoft
Lync action for Business Analyzer 87
Lync actions for Microsoft Dynamics
upgrade information, accessing on the
User Date window
displaying 58 modifying the user date 58
User Display Preferences window
changing your display 56 displaying 56
User Password Setup window
changing user passwords 57 displaying 57
user preferences
User Preferences window
customizing user preferences 55 displaying 55
setting up MapPoint integration 83
user settings, for reports in Business
users
180 S Y S T E M U S E R ’ S G U I D E
I N D E X
V
W
Welcome to Microsoft Dynamics GP window
automatically log in to Microsoft
Dynamics GP 12 displaying 12 logging in to Microsoft Dynamics GP
12 quitting Microsoft Dynamics GP 12
Window modes, displaying reports 32
windows
Word
exporting SmartList search results to
Workflow alert settings, modifying 59
Workflow Alerts page
displaying 59 modifying alert settings 59
Workflow feature
accessing in Microsoft Dynamics GP
described 75 overview 75 using Workflow in Microsoft
Workflow User Delegation page
S Y S T E M U S E R ’ S G U I D E 181
Tải xuống
Đã cập nhật liên kết công khai
Liên kết công khai đến cuộc trò chuyện của bạn đã được cập nhật. You may view and manage your chat links after registration here.
Liên kết công khai tài liệu
Quảng cáo
