CD/DVD Player

4-266-027-92(1)

Reference Guide

DVP-SR110

© 2011 Sony Corporation

2

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The mains lead must be changed only at a qualified service shop.

Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like.

This appliance is classified as a

CLASS 1 LASER product. The

CLASS 1 LASER PRODUCT

MARKING is located on the rear exterior.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

Disposal of Old

Electrical &

Electronic

Equipment

(Applicable in the

European Union and other

European countries with separate collection systems)

Disposal of waste batteries

(applicable in the

European Union and other

European countries with separate collection systems)

Precautions

• To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

• The player is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.

• Do not install this player in a confined space, such as a bookshelf or similar unit.

• Install the player so that the AC power cord (mains lead) can be unplugged from the wall socket immediately in the event of trouble.

• If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.

Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the set due to lightning and power-line surges.

Note about the discs

Do not use the following discs:

– A disc that has a non-standard shape (e.g., card, heart).

– A disc with a label or sticker on it.

Region code

Your player has a region code printed on the back of the unit and only will play commercial DVDs

(playback only) labelled with identical region codes. This system is used to protect copyrights.

Commercial DVDs labelled will also play on this player.

ALL

Depending on the commercial

DVD, there may be no region code indication, even though playing the commercial DVD is prohibited by area restrictions.

DVP–XXXX

X

Region code

00V 00Hz

NO.

00W

0-000-000-00

Copyrights

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

• “DVD+RW,” “DVD-RW,”

“DVD+R,” “DVD+R DL,”

“DVD-R,” “DVD VIDEO,” and

“CD” logos are trademarks.

• MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and

Thomson.

About this manual

“DVD” may be used as a general term for commercial DVDs,

DVD+RWs/DVD+Rs/DVD+R

DLs (+VR mode) and DVD-RWs/

DVD-Rs/DVD-R DLs (VR mode, video mode).

Playback

Control Menu display

Use the Control Menu to select a function and to view related information.

Press DISPLAY.

To change the Control Menu display, press

DISPLAY again.

1 2 ( 2 7 )

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

OFF

OFF

SET

ON

PROGRAM

ENTER Quit: DISPLAY

PLAY

DVD VIDEO

A Control Menu items

B Currently playing title/Total number of

titles

C Currently playing chapter/Total number

of chapters

D Playing time

E Selected disc type

F Playback status

G Selected item icon/menu options

H Operation message

I Selected Control Menu item

Menu list

Item Item Name, Function

TITLE/SCENE/TRACK

CHAPTER/INDEX

TRACK

Selects the title, scene, track, chapter, or index to be played.

TIME/TEXT

Checks the elapsed time and the remaining playback time.

Input the time code for picture and music search

(DVD only).

TOP MENU/MENU

(DVD VIDEO only)

TOP MENU: Displays the top menu.

MENU: Displays the menu.

ORIGINAL/PLAY LIST

Selects the type of title (DVD-VR mode) to be played: ORIGINAL, or edited PLAY LIST.

PROGRAM*

1,

*

2

Selects the title, chapter, or track to play in the order you want.

1 Select “SET t,” then press ENTER and select the title (T), chapter (C), or track (T) you want to programme, and press ENTER.

2 Repeat selecting the title, chapter, or track.

3 Press N.

SHUFFLE*

1,

*

2

Plays the title, chapter, or track in random order.

REPEAT*

1,

*

2

Plays all titles/tracks/albums or a single title/ chapter/track/album/file repeatedly.

A-B REPEAT*

1,

*

2

Specifies the parts you want to play repeatedly.

1 During playback, select “SET t,” then press ENTER.

The “A-B REPEAT” setting bar appears.

2 When you find the starting point (point A), press ENTER.

3 When you reach the ending point (point B), press ENTER again.

PARENTAL CONTROL

Set to prohibit playback on this player.

PLAYER

t: Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes

(Parental Control).

PASSWORD

t: Enter a 4-digit password using the number buttons. Also use this menu to change the password.

,continued

3

4

Parental Control (limited playback)

You can set a playback limitation level.

1 Select “PLAYER t,” then press ENTER.

Enter or re-enter your 4-digit password, then press ENTER.

2 Press X/x to select “STANDARD,” then press ENTER.

Press X/x to select an area, then press

ENTER.

When you select “OTHERS t,” select and enter a standard code. See “PARENTAL

CONTROL AREA CODE LIST” at the end of this manual.

3 Press X/x to select “LEVEL,” then press

ENTER.

Press X/x to select the level, then press

ENTER.

Parental Control setting is complete.

The lower the value, the stricter the limitation.

To turn off the Parental Control function, set

“LEVEL” to “OFF.”

If you forget your password, enter “199703” in the password box, press ENTER, and then enter a new 4-digit password.

SETUP

QUICK: Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of the TV and the audio output signal.

CUSTOM: In addition to the Quick Setup setting, you can adjust various other settings

(page 6).

RESET: Returns the settings in “SETUP” to the default setting.

ZOOM*

1

Magnifies the image up to four times the original size, scroll using C/X/x/c.

ANGLE

Changes the angle.

CUSTOM PICTURE MODE

Selects the picture quality that best suits the programme you are watching.

STANDARD: Displays a standard picture.

DYNAMIC: Produces a bold dynamic picture by increasing the picture contrast and the colour intensity.

CINEMA: Enhances details in dark areas by increasing the black level.

MEMORY

t: Adjusts the picture in greater detail.

SHARPNESS

Exaggerates the outline of the image to produce a sharper picture.

OFF: Cancels this option.

1: Enhances the outline.

2: Enhances the outline more than 1.

*

1

*

2

To return to normal play, select “OFF” or press

CLEAR.

The play mode is cancelled when:

– you open the disc tray.

– you turn off the player.

◆Items for DATA discs

Item Item Name, Function

ALBUM

Selects the album that contains music and photo files to be played.

FILE

Selects the photo file to be played.

ALBUM

Selects the album that contains the video file to be played.

FILE

Selects the video file to be played.

DATE

Displays the date the picture was taken by a digital camera.

INTERVAL*

Specifies the duration for which the slides are displayed on the screen.

EFFECT*

Selects the effects to be used for changing slides during a slide show.

MODE 1: The images randomly cycle through the effects.

MODE 2: The image sweeps in from top left to bottom right.

MODE 3: The image sweeps in from top to bottom.

MODE 4: The image sweeps in from left to right.

MODE 5: The image stretches out from the centre of the screen.

OFF: Turns off this function.

MEDIA

Selects the media type you want to play.

VIDEO: Plays video files.

PHOTO (MUSIC): Plays photo and music files as a slide show. You can view a slide show with sound when music and photo files are placed in the same album. If the playing time of either music or photos is longer, the longer one continues without sound or image.

PHOTO: Plays photo files.

MUSIC: Plays music files. Press SUBTITLE while playing music files that contain unsynchronized lyric information. The player supports MP3 ID3 Lyrics only.

* Depending on the file, this function may not be possible.

To change the colour system

If the on-screen menu of the player does not appear on the connected TV, switch the player’s colour system to match the colour system of the TV (NTSC or PAL).

First turn off the player by pressing [/1. Next press DISPLAY, enter “0” using the number button, and then press [/1 on the remote. The player turns back on, and the on-screen menu appears on the TV screen.

To play VIDEO CDs with PBC functions

When you start playing a VIDEO CD with

PBC (Playback control) functions, the menu for your selection appears.

To play without using PBC

Press ./> or the number buttons while the player is stopped to select a track, then press N or ENTER. To return to PBC playback, press x twice, then press N.

Controlling TVs with the remote

You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.

If your TV is listed in the table below, set the appropriate manufacturer’s code.

When you replace the batteries of the remote, set the appropriate code number again.

1 While holding down TV [/1, press the number buttons to select your TV’s manufacturer’s code.

2 Release TV [/1.

Code numbers of controllable TVs

Sony

Hitachi

JVC

LG/Goldstar

Panasonic

Philips

Samsung

Sharp

Toshiba

01 (default)

24

33

76

17, 49

06, 08, 72

71

29

38

5

6

CUSTOM Menu

You can adjust various settings.

Press DISPLAY when the player is in stop mode, select (SETUP), and then select “CUSTOM.” The CUSTOM menu appears.

Menu list

Item Item Name, Function

LANGUAGE SETUP

OSD (On-Screen Display): Switches the display language on the screen.

MENU*

1

: Selects the desired language for the disc’s menu. (DVD VIDEO only)

AUDIO*

1

: Switches the language of the sound track. When you select “ORIGINAL,” the language given priority in the disc is selected.

(DVD VIDEO only)

SUBTITLE*

1

: Switches the language of the subtitle recorded on the DVD VIDEO. When you select “AUDIO FOLLOW,” the language for the subtitles changes according to the language you selected for the sound track.

(DVD VIDEO only)

SCREEN SETUP

TV TYPE: Selects the aspect ratio of the connected TV.

16:9

4:3 LETTER BOX

4:3 PAN SCAN

COLOR SYSTEM (VIDEO CD): Selects the colour system when you play a VIDEO CD. If your TV is the DUAL system, select “AUTO.”

SCREEN SAVER: When set to “ON,” the screen saver appears when the player is in pause or stop mode for 15 minutes. Press N to turn off the screen saver.

BACKGROUND: Selects the background colour or picture on the TV screen. If you set

“JACKET PICTURE,” even though the disc does not contain a jacket picture, the

“GRAPHICS” picture appears.

CUSTOM SETUP

AUTO STANDBY: Sets the Auto Standby setting on or off. If you select “ON,” the player enters standby mode when left in stop mode for more than 30 minutes.

AUTO PLAY: When set to “ON,” the player automatically starts playback when the player is turned on by a timer (not supplied).

PAUSE MODE: Selects the picture in pause mode. Normally select “AUTO.” When the picture is output in high resolution, set to

“FRAME.” (DVD only)

TRACK SELECTION: Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, MPEG audio, DTS, or Dolby Digital format) are recorded. If you select “AUTO,” priority is given. (DVD VIDEO only)

MULTI-DISC RESUME: Switches the Multidisc Resume setting on or off. Resume playback can be stored in memory for up to 6 different

DVD VIDEOs/VIDEO CDs. If you start the settings again, the resume point is cleared.

(DVD VIDEO/VIDEO CD only)

AUDIO SETUP

AUDIO DRC (Dynamic Range Control)*

2

:

Set according the surrounding environment. Set to “TV MODE” when the smallest sounds are indiscernible, or set to “WIDE RANGE” when the listening environment is good, for example, in a home movie theatre.

DOWNMIX*

2

: Switches the method for mixing down to 2 channels when you play a

DVD which has rear sound elements (channels), or is recorded in Dolby Digital format.

Normally select “DOLBY SURROUND.”

DIGITAL OUT: Selects if audio signals are output via the DIGITAL OUT (COAXIAL) jack. When you select “ON,” set also the following “DOLBY DIGITAL,” “MPEG,”

“DTS,” or “48kHz/96kHz PCM.”

DOLBY DIGITAL: Selects the type of Dolby

Digital signal. Set to “D-PCM” when the player is connected to an audio component without a built-in Dolby Digital decoder.

MPEG: Selects the type of MPEG audio signal.

Set to “MPEG” when the player is connected to an audio component with a built-in MPEG decoder.

DTS: Selects the type of DTS audio signal. Set to “ON” when you play a DVD VIDEO with

DTS sound tracks. Do not set to “ON” when you connect the player to an audio component without a DTS decoder.

48kHz/96kHz PCM: Selects the sampling frequency of the digital audio output signal.

(DVD VIDEO only)

*

1

*

2

When you select “OTHERS t,” select and enter a language code. See “LANGUAGE

CODE LIST” at the end of this manual.

This function affects the output from the following jacks:

– LINE OUT L/R (AUDIO) jacks.

– DIGITAL OUT (COAXIAL) jack only when

“DOLBY DIGITAL” is set to “D-PCM.”

Information

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest

Sony dealer.

The power is not turned on.

c Check that the power cord (mains lead) is connected securely.

There is no picture/picture noise appears.

c Re-connect the connecting cord securely.

c The connecting cords are damaged.

c Check the connection to your TV and switch the input selector on your TV so that the signal from the player appears on the TV screen.

c Change the colour system of the player

(page 5).

c The disc is dirty or flawed.

There is no sound.

c Re-connect the connecting cord securely.

c The connecting cord is damaged.

c The player is in pause mode or in Slow-motion

Play mode.

c The player is in fast forward or fast reverse mode.

The remote does not function.

c The batteries in the remote are weak.

c The remote is not pointed at the remote sensor

on the player.

c When you operate the player by pressing buttons on the remote in sequence, press the buttons within 5 seconds of each other.

The disc does not play.

c The disc is turned over.

Insert the disc with the playback side facing down.

c The disc is skewed.

c The player cannot play certain discs.

c The region code on the DVD does not match the player.

c Moisture has condensed inside the player.

c The player cannot play a recorded disc that is not correctly finalized.

,continued

7

8

The player does not operate properly.

c When static electricity, etc., causes the player to operate abnormally, unplug the player.

“C:13:**” appears on the screen.

c Clean the disc with a cleaning cloth or check its format.

“C:31:**” appears on the screen.

c Re-insert the disc correctly.

Playable file format

Video: MPEG-1 (Cyber-shot data)

Photo: JPEG (DCF format)

Music: MP3 (except for mp3PRO)/WMA

(except for WMA Pro)*

1,

*

2

/AAC*

1,

*

2

/

LPCM/WAVE

*

1

*

2

Files with copyright protection (Digital Right

Management) cannot be played.

The player does not play coded files such as

Lossless.

Supported extensions: “.mpg”, “.mpeg”,

“.jpg”, “.mp3”, “.wma”, “.m4a”, “.wav”

Supported discs: DVD, DVD

±RW/±R/±R

DL, Music CD/Super VCD, CD-R/-RW

• DATA CDs recorded according to ISO

9660 Level 1/Level 2, or its extended format, Joliet.

• DATA DVDs recorded according to UDF.

• The player will play any file in the above, even if the file format differs. Playing such data may generate noise that can result in speaker damage.

• To play a complex hierarchy of folders may take some time. Create albums with no more than two hierarchies.

• Some video, photo, and music files may not play, depending on the encoding/recording condition.

• To start playback and proceed to the next or another album/file may take some time.

• The player will recognize a maximum of

200 albums and 600 files. It can recognize up to 300 music files and 300 photo files when “PHOTO (MUSIC)” is selected.

• The player may not play a combination of two or more video files.

• The player cannot play a video file of size more than 720 (width) × 576 (height)/2 GB.

• Depending on the file, playback may not be smooth. You are recommended to create the file at a lower bit rate.

• The player may not play back the high bit rate video file on the DATA CD smoothly.

You are recommended to play back using

DATA DVD.

Note about recordable media

Some recordable media cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. Also some

DATA discs created in Packet Write format cannot be played.

For player that cannot play images that contain a copy protection only

Images in DVD-VR mode with CPRM

(Content Protection for Recordable Media) protection may not be played.

Note on playback operations of DVDs and

VIDEO CDs

Some playback operations of DVDs and

VIDEO CDs may be intentionally set by software producers. Since this player plays

DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available.

Also, refer to the operating instructions supplied with the DVDs or VIDEO CDs.

Note on discs

This unit is designed to playback discs that conform to the Compact Disc (CD) standard.

DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard.

Therefore, these discs may not be compatible with this unit.

Specifications

System

Laser: Semiconductor laser

Outputs

• LINE OUT L/R (AUDIO): Phono jack

• DIGITAL OUT (COAXIAL): Phono jack

• LINE OUT (VIDEO): Phono jack

General

• Power requirements: 110-240 V AC, 50/

60 Hz

• Power consumption: 6 W

• Dimensions (approx.): 270

× 38.5 × 209 mm (width/height/depth) incl. projecting parts

• Mass (approx.): 950 g

• Operating temperature: 5

°C to 35 °C

• Operating humidity: 25 % to 80 %

Supplied accessories

• Audio/Video cord (phono plug

× 3 y phono plug

× 3) (1)

• Remote commander (remote) (1)

• R6 (size AA) batteries (2)

Specifications and design are subject to change without notice.

9

LANGUAGE CODE LIST

1 Page 6

Code Language

1027 Afar

1028 Abkhazian

1032 Afrikaans

1039 Amharic

1044 Arabic

1045 Assamese

1051 Aymara

1052 Azerbaijani

1053 Bashkir

1057 Byelorussian

1059 Bulgarian

1060 Bihari

1061 Bislama

1066 Bengali;

Bangla

1067 Tibetan

1070 Breton

1079 Catalan

1093 Corsican

1097 Czech

1103 Welsh

1105 Danish

1109 German

1130 Bhutani

1142 Greek

1144 English

1145 Esperanto

1149 Spanish

1150 Estonian

1151 Basque

1157 Persian

1165 Finnish

1166 Fiji

1171 Faroese

1174 French

1181 Frisian

Code Language

1183 Irish

1186 Scots Gaelic

1194 Galician

1196 Guarani

1203 Gujarati

1209 Hausa

1217 Hindi

1226 Croatian

1229 Hungarian

1233 Armenian

1235 Interlingua

1239 Interlingue

1245 Inupiak

1248 Indonesian

1253 Icelandic

1254 Italian

1257 Hebrew

1261 Japanese

1269 Yiddish

1283 Javanese

1287 Georgian

1297 Kazakh

1298 Greenlandic

1299 Cambodian

1300 Kannada

1301 Korean

1305 Kashmiri

1307 Kurdish

1311 Kirghiz

1313 Latin

1326 Lingala

1327 Laothian

1332 Lithuanian

1334 Latvian;

Lettish

1345 Malagasy

Code Language

1347 Maori

1349 Macedonian

1350 Malayalam

1352 Mongolian

1353 Moldavian

1356 Marathi

1357 Malay

1358 Maltese

1363 Burmese

1365 Nauru

1369 Nepali

1376 Dutch

1379 Norwegian

1393 Occitan

1403 (Afan)Oromo

1408 Oriya

1417 Punjabi

1428 Polish

1435 Pashto;

Pushto

1436 Portuguese

1463 Quechua

1481 Rhaeto-

Romance

1482 Kirundi

1483 Romanian

1489 Russian

1491 Kinyarwanda

1495 Sanskrit

1498 Sindhi

1501 Sangho

1502 Serbo-

Croatian

1503 Singhalese

1505 Slovak

1506 Slovenian 1703 Not specified

ISO 639: 1988 (E/F) standard

Code Language

1507 Samoan

1508 Shona

1509 Somali

1511 Albanian

1512 Serbian

1513 Siswati

1514 Sesotho

1515 Sundanese

1516 Swedish

1517 Swahili

1521 Tamil

1525 Telugu

1527 Tajik

1528 Thai

1529 Tigrinya

1531 Turkmen

1532 Tagalog

1534 Setswana

1535 Tonga

1538 Turkish

1539 Tsonga

1540 Tatar

1543 Twi

1557 Ukrainian

1564 Urdu

1572 Uzbek

1581 Vietnamese

1587 Volapük

1613 Wolof

1632 Xhosa

1665 Yoruba

1684 Chinese

1697 Zulu

PARENTAL CONTROL AREA CODE LIST

1 Page 3

Code Area

2044 Argentina

2047 Australia

2046 Austria

2057 Belgium

2070 Brazil

2079 Canada

2090 Chile

2092 China

2115 Denmark

Code Area

2165 Finland

2174 France

2109 Germany

2248 India

2238 Indonesia

2254 Italy

2276 Japan

2304 Korea

2363 Malaysia

Code Area

2362 Mexico

2376 Netherlands

2390 New Zealand

2379 Norway

2427 Pakistan

2424 Philippines

2436 Portugal

2489 Russia

2501 Singapore

Code Area

2149 Spain

2499 Sweden

2086 Switzerland

2528 Thailand

2184 United

Kingdom

4-266-027-92(1)

Printed in China