INSTRUCTIONS-PARTS LIST

In-Line Filter

Model 210729, Series F

with 60 mesh filter element

Model 218601, Series B

with 100 mesh filter element

Optional 200 mesh filter element is available. See ACCESSORIES.

Important Safety Instructions

Read all warnings and instructions in this manual and in all related manuals. Save all instructions.

To reduce the risk of serious bodily injury, including skin injection and splashing fluid in the eyes or on the skin, relieve pressure in the gun when handling the filter or any other part of the system.

To relieve pressure, shut off the sprayer, unplug it if it is electric, trigger the gun to relieve pressure, engage the gun safety lever, and open the pressure drain valve.

1.

Installation: Relieve pressure. Install the filter between the short whip-end hose and the main spray hose. See Fig. 1.

2.

Cleaning:

•

Relieve pressure. Disconnect the main paint hose from the sprayer outlet. Grasp the end of the plastic retainer and pull out the filter. See Fig. 1.

•

Soak the filter in solvent and then scrub it with a fine-bristled brush. To clean the filter, disconnect it from the short hose to avoid getting contaminants into the gun. If necessary, unscrew one of the plastic retainers from the spring and slide off the filter screen. See Fig. 2.

Parts

1

2

3

REF.

No.

PART NO.DESCRIPTION

4A

4B

5

6A

6B

110336 COUPLING, 1/4 npt

185591 HOUSING, filter

277322 HOSE, nylon; 3/16in. ID; 1/4 npsm(f) swivel x 1/4 npt; spring guards; 3 ft.

213069 FILTER ELEMENT - Model 210729

Includes replaceable items 5 and 6A

210742 FILTER ELEMENT - Model 218601

Includes replaceable items 5 and 6B

104749 .PACKING, split o-ring, PTFE

.SCREEN, filter, 60 mesh

.SCREEN, filter 100 mesh

QTY

1

1

1

1

1

1

1

1

Accessories

Must be purchased separately.

Filter Elements

223136 200 mesh

210742

213069

100 mesh

60 mesh

Filter Screens

210731 60 mesh, package of 3

210732

210733

100 mesh, package of 3

200 mesh, package of 3

307245H

EN

Graco Standard Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by

Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy

(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT

MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.

Graco Information

For the latest information about Graco products, visit www.graco.com.

TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.

Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

For patent information, see www.graco.com/patents.

Original instructions. This manual contains English. MM 307245

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

Copyright 2006, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revision H, March 2015