Lock and cable
To lock
Step 1: Anchor the security cable to a steady object.
Step 2: Circle the cable around the neck portion of the object and secure the cable into the locking slot.
Step 3: Slide to adjust the length of the cable.
Step 4: Press the snap till hearing the sound of
“click” and the length of cable is fixed.
Step 5: Scramble the dials randomly.
To unlock
Step 1: Turn the dials to your opening combination.
Step 2: Press the release button. The snap will jump out and release the cable.
Intelligent Pelican Ltd
Scarwood, Mildenhall, Marlborough,
Wilts SN8 2NG
00 44 (0)1 672 516 588 mike @ intelligentpelican.com
www.intelligentpelican.com
To set your combination
Step 1: Turn the dials to preset combination 0-0-0-0, aligning the numbers with the guide point.
Step 2: Press the snap till hearing a “click” and press reset button with a mini screwdriver or other workable tool. Turn counterclockwise 90º.
Step 3: Turn the digits to the desired combination.
Step 4: Turn the reset button clockwise 90º back to its original position. Press the Release button and the snap will jump out. The lock is now ready to open with the new combination.
Locking Slot
Reset Button
