advertisement
www.jbctools.com
HD
HEAVY DUTY STATION
HD / HEAVY DUTY STATION
HD-2B / 1B / 9B
CONTROL UNIT
HD-SC
STAND
T470-A
HANDPIECE
CL9885
TIPS CLEANING STAND
S0354
SPONGE
POWER CORD
2
0011283
CONNECTION CABLE 1m
MANUAL www.jbctools.com
HD
HEAVY DUTY STATION
MANUAL www.jbctools.com
TIP CLEANING
RANGE
MANUAL www.jbctools.com
T210·T245·T470
SOLDERING HANDPIECES
INSTALLATION
Power Cord
Socket
Equipotential connector
USB Connector to PC
ATTENTION:
We strongly recommend tigthening screw firmly to avoid cartridge from moving
Connectable tools: T470-A, T470-SA, T470-FA and T470-MA
HEAT MANAGEMENT
JBC stations intelligently manage the tool tip temperature:
Work mode: Lift tool from the stand and the tool tip heats up to the selected temperature.
Sleep mode: When the tool is in the stand, the temperature reduces (preset sleep temperature is 180ºC / 360ºF).
Hibernation mode: After longer periods of inactivity (pre-set to 30 minutes), the power is cut off and the tool cools down to room temperature.
Heat management increase tip life which reduces cost of ownership.
3
HD / HEAVY DUTY STATION
CARTRIDGE EXTRACTOR
4
CHANGING THE HANDPIECE’S CARTRIDGE
Alignment
Important.
It is essential to insert the cartridge till the end for a good connection.
Use the mark as reference.
CABLE COLLECTOR ASSEMBLY
5
HD / HEAVY DUTY STATION
CL9885
TIP CLEANING STAND
CL6210
BRASS WOOL
S0354 SPONGE
CL6210 Brass wool
CL6205 Inox wool
CL6220 Brushes
CL0354 Sponge
CL0236 WIPER
OPTIONAL
CL6205 INOX WOOL CL6220 BRUSHES TT-A TIP TINNER-CLEANER
CL0236
TIP WIPER
TAPPING WIPPING Wiper can be easily removed to clean it.
6
CONTROL SCREEN
Tip temperature
Selected temp. 350 o C
350
P o w e r 1 0 %
0 c
% Instant power supplied to the tool
Decrease & move down
Access Menu
&
Confirm
Selection
Increase & move up
SETTINGS MENU
ORIGINAL PIN: 0105
Main menu
Exit
1 Reset settings
2 Station settings
3 Tool settings
4 Counters
5 Program version
Station settings
1 Temp unit Celsius
2 Maximum temp 400 0 C
3 Minimum temp 200 0 C
4 Help text OFF
5 Beep ON
6 Power limit 250W
7 Change PIN
Back
Tool settings
1 Fix one temp -----
2 Temp levels set OFF
3 Sleep delay 0 min
Tool 245
4 Sleep temp 180 0 C
5 Hibernation delay 30 min
6 Temp adjust + O O C
Back
Tool 245
Counters
1 Plugged hours 0
2 Working hours 0
3 Sleep hours 0
4 Hibernation hours 0
5 No tool hours 0
6 Sleep cycles 0
Back
7
TECHNICAL SPECIFICATIONS
- Temperature selection from 90°C (190°F) to 500°C (932°F) (±5%).
- Power: 250W.
- Safety transformer, mains separator and double isolation.
- HD-2B 230V 50/60Hz. Input fuse: 2A. Output: 47V.
- HD-1B 120V 50/60Hz. Input fuse: 4A. Output: 47V.
- HD-9B 100V 50/60Hz. Input fuse: 4A. Output: 47V.
- Total weight: 5.9 kg (13.1 lb).
- Complies with CE standards on electrical safety, electromagnetic compatibility and ESD protected housing “skin effect”.
- RoHS compliant.
- Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be thrown in the garbage.
WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased enclosing this fully filled in, sheet.
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
www.jbctools.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement