PG88 GPS Tracker Watch Manual

Add to My manuals
38 Pages

advertisement

PG88 GPS Tracker Watch Manual | Manualzz
PG88 GPS Tracker Watch Manual
Patent products, counterfeit will investigate
Patent no#:201230361046.8
Patent no#:201230066090.6
1. Products Summary
1.1 Foreword
Welcome to use our GPS tracker watch, in order to help you know this products and operate
the devices professional as soon as possible,we provide this detailed instruction manual with
products,which include products introduction,usage method and notice,so that you can use the
products function better.
1.2 GPS tracker watch functions
GPS satellite and LBS location
SOS emergency call
Family number speedy dialing
PC web real-time tracking
SMS tracking location
Geo-fence
History playback
remote monitoring
Alarm clock
MP3 music player
2. Technical specifications
Name
Item
Battery Volt
Parameter
GPS tracker device
3.7V
Charging Volt
DC5V
Watch Size
Outer Case
battery17MM
Working Temperature
Diameter:45MM
/
Thickness
with
-20℃~+70℃
Storage Temperature
-40℃~+85℃
Working frequency
GSM 850/900/1800/1900 MH
Sensitivity
GSM -108dBm /GPRS CS4 -102dBm
Location query mode
PC platform, SMS, etc
3. Attention
Before using this GPS device, please notice the instructions as below:
Make sure the SIM card is standard GSM network format,currently we don’t support
3G network
Make sure the SIM card opened GPRS function,we suggest to use a GPRS packages(saving
cost)
Make sure the account of SIM card has enough money;
Make sure the SIM card does not set a password (PIN1, etc.);
Please check the SIM card SMS inbox,if full,we suggest to delete some,otherwise the
SIM card can not receive GPS tracking SMS;
Please make sure the SIM card opened the caller ID display function;
Please contact your telecom operator for APN information and setting the APN on the
device.The factory default APN setting is CMNET.
Before tracking on the PC-WEB platform, please use the cell phone to set up the SOS
phone number and related instructions.
4. Introduction Of Products
4.1 Product appearance and key descriptions
1:Switch key/ return key/call off
2:USB /earphone interface
5:Down /tel2 key
6:Speaker
3:SOS bottom/Confirm button/Dial button
4:Microphone
7:Up /tel1 key
8:Insert SIM card
Opening the battery cover, take out the battery, insert SIM card, put on the battery then cover
the lid:
4.2 Screen Icon Descriptions
Battery charge status
Network signal strength
Alarm has been set
Ring mode
GPRS is available
GPS working
4.3 operating method
4.3.1 Power on/ off
Power on:Long press the Switch key for 3 seconds then relaxed , the watch will power on, and
automatically searching GSM net, when it shows “Set the local city”we press confirm,then press
the up or down button to choose your local city time zone.
Power off:Long press the Switch key for 3 seconds then relaxed, the watch will power off.
4.3.2 Phone
book function(All telephone phone number have to be
saved in SIM card, the watch can not add or edit any telephone number)
The watch can not add contact number directly, you need to add contact
numbers in the sim card via other mobile phone. Then insert the SIM card to
the watch, you can review all contact number. Preview number by press up
bottom or down bottom, press Confirm button to make a phone call.( The
quantity of mobile phone number associated with the storage capacity of your SIM card)
4.3.3 Setting
Scene mode:Scene mode include standard mode,quiet mode,meeting mode,
outdoor mode,own mode,when we want to set ring tone volume,chosen
volume menu, long time press up/down button to adjust.
Watch setting: Setting time and date, press confirm button to move figure,
(such as year,month,day,hour,minute), press up/down button to adjust the
figures.
4.3.4
Music
Pressing confirm button for play/suspend. Short time press up/down button is
previous/next music. Long time press up/down is adjusting the volume.
Attention: The music can only be played when MP3 file put in root directory"
my music".
A moderate volume of music will be better for you when listening,continuous listening high
volume music may hurt your hearing.
4.3.5 GPS
Tracking
Enter GPS location,we can get the current location of the watch .( this
function just working outside)
4.3.6
Clock Alarm
Press confirm button into clock alarm menu, press confirm button to choose
figures( hour, minute), pressing up/down to adjust the number, press return
button to save and exit.
5. Set Command
There are two ways to set the commands.
First, download and install APK software to the android smart mobile phone. Please see the
following instructions Method 1st. , The Second method is through SMS setting(5.16).
Note: Only need choose one method, cannot use both method at same time.
Method 1st:
(5.1)
)Android os smart mobile phone----- Settings--Security--“
“Unknown Sources”
”,allow it .
(5.2)
)APK software web,download from the web:
:www.paxgps.com
Or scan it from RQ Code.
(5.3)
)Add Device Management
Click “ADD”
For example:
Fill in the watch name " ZGPAX", If you watch the phone number is 18824673047, default
password is 0000 and press OK.
As showing:
Open“ZGPAX”
(5.4)
)SOS Setting
The watch can set up three SOS numbers, 1SOS is admin number.
Eg: SOS number is 13800138000, direct input 13800138000 will be OK.
When the watch set up SOS numbers well, long press the SOS button will automatically dial
1SOS number. If 1SOS numbers do not answer the phone or reject a call, the watch will
automatically give a call 2SOS number when 2SOS numbers do not answer the phone or reject
phone, the watch will automatically give 3SOS number to call, this cycle three times. When the
SOS number is not answered or the call is completed, the watch will automatically send: "SOS +
current watch the latest location information" to SOS1 phone number.
(5.5)
)Online platform tracking the watch’s location
Update directly enter numbers can be, for example: 60 or 0, and then press OK.
track 60seconds per time, 0 means turn off online platform tracking .
To save power, turn off the PC platform if no need this function.
If watch is "Off" and then "on " ,PC platform tracing is disabled by default.
Open the PC platform computer, platforms tracking URL www.paxgps.com
Enter the login name: watch 15 IMEI numbers.
How to know right IMEI number:
1: there is IMEI sticker on the watch.
2: Open menu, long press Tel1 , can get it.
Default password :123456
(5.6)
)Positioning query function (map link, need base on good GPS signals environment)
When watch get GPS signal, will reply a map link to SOS numbers,if no GPS signal will be LBS reply
with text message.
(5.7)
)Call-back
Watch automatically dials the number currently send SOS message, double-talk and call back
after the watch.
(5.7)
)Monitoring function
Guardians can use this function to listen to the voice of nearby ward, but if the watch is
locked, nothing happens.
(5.8)
)Single Location
Positioning watch will send SMS reply location information about current ward’s to SOS
numbers automatically.
(5.9)
)Low battery alarm
When the watch is low battery, it will reply a SMS: low battery to 1SOS numbers.
(5.10)
)Call Management
On:
When get this command, Except Three SOS numbers can call the watch, any other numbers are
impossible.
Off:
Alow all phone numbers call the watch.
(5.11)
)TEL keys’ fast dial settings
Eg:
Fill in the management software: 138XX138008 then click OK.
Reply: set TEL1 OK
Fill in the management software: 138XX138009 then click OK.
Reply:set TEL2 OK
As long press tel1 key, it will automatically dial watch 138XX138008, when long press tel2 key, it
will automatically dial watch 138XX138009. (Need to press the TEL key upon standby interface)
(5.12)
)Advanced Settings
Open “ Settings”
(5.13)
) Change watch’s Password
For example:
Click change watch’s Password, write down new password: 1234, click ok.
Feedback :set psw ok!
The watch’s password have amend to 1234. The default password is :0000,
Only 1SOS phone NO. can change this password.
(5.14)
)Set APN
Set APN is for the watch can send data to the platform by GPRS.
China usually no need set apn, but many other countries and regions need Set APN.
About APN info the user can ask the telecom provider of the sim card in the watch.
For example:
On this software, choose APN set, write down the correct APN info.
feedback:set apn ok!
Only 1SOS phone NO. can set and change this APN.
(5.15)
)Restore factory settings
This set will clear watch’s all settings, including user information,
and so on.
If you cannot use this apK software, please use the following
message instruction to set the watch.
Method 2, SMS Settings
(5.16)
) Setting SOS phone numbers
Format: 1SOS#0000#phone number
2SOS#0000#phone number
3SOS#0000#phone number
Total can set three SOS phone numbers. "0000" is the default password of the watch. This
password is very important, can change the SOS phone number in any normal phone
when have this password. ( Change the password please see below: " 5.8 Change
password".)
For example:
Use the normal phone send SMS to the watch:
1SOS#0000#13800138000
The watch will reply SMS: set 1SOS ok, then phone number 13800138000 will become
the watch’s 1SOS(admin)number.
2SOS#0000#13800138001
The watch will reply SMS : set 2SOS ok, then phone number 13800138001 will become
the watch’s 2SOS(guardian 1)number.
3SOS#0000#13800138002
The watch will reply SMS : set 3SOS ok, then phone number 13800138002 will become
the watch’s 3SOS(guardian 2)number.
Also you can just set 1 or 2 SOS numbers.
This SMS also can change the SOS phone number. Fox example:
Use the normal phone send SMS to the watch:
1SOS#0000#13800138003
The 1SOS phone number of the watch will update to be 13800138003.
After setting SOS phone numbers successfully, long time press SOS button of the
tracking watch, it will auto call 1SOS phone number, when the 1SOS does not answer or
refused to answer the calling, the tracking watch will auto call 2SOS, when 2SOS not
answer or refused to answer the calling, the watch will auto call 3SOS. It will loop calling 3
times. After press SOS button, the watch will auto send a SMS :"SOS+detail address" to
the 1SOS phone.. If long time press call off button, it will close SOS calling function.
Note:Below all this SMS command must send by SOS phone number
(5.17)
)Get tracking link of position
Use any SOS phone number send this SMS to the watch:
SMS format: 01
This command need the watch outside and can get the GPS signal.
If have GPS signal will reply a map link SMS to SOS phone NO.
If not have GPS signal, the watch will auto use LBS model for tracking, reply LBS detail
address SMS.
LBS: Location Based Service,tracking by base station via GRPS.
(5.18)
)Call back function
Use any SOS phone number send this SMS to the watch:
SMS format: 02
the watch will auto call back to this sos phone number to have a two-way
conversation(can talk with each other).
(5.19)
)Listen function
Use any SOS phone number send this SMS to the watch:
SMS format: 03
After send out this SMS, the watch will call back to this SOS phone number
automatically to have a one-way conversation. This SOS phone can monitor the sound
around the watch, but the watch can not hear any sound. The watch is auto locked (all
buttons and screen failure and no response.)
(5.20)
)Low battery automatic alarm
Use any SOS phone number send this SMS to the watch:
SMS format: 04
Feedback message: set low battery ok!
When the watch show low battery, there will be a message sent to 1SOS phone
number automatically.
(5.21)
)Single time get watch's position
After APN set successful, you can use any SOS phone number send this SMS to the
watch:
SMS format: 05
The Watch will reply the detail position with street name to this SOS phone number by
SMS.
(5.22)
)Set tracking on website in real time
Use any SOS phone number send this SMS to the watch:
SMS format: 08# interval time(seconds)
For example:Send the SMS to the watch: 08#60
Feedback message: set 08 OK
60 is the interval time, means every 60 seconds the watch will update the position data on
website.
This SMS command will let the GPS always working, the battery will running fast, if no
need see the website tracking in real time, please shut off this function to save the battery.
Send this SMS to shut off this function: 08#0
Feedback message :set off
And every time turn off the watch, need resend this SMS to get real time tracking if
need this function(to save battery purpose)
(5.23)
) Password change
Format: 066#old password#new password
SOS Number send SMS to watch, for example: 066#0000#1234
Feedback: set psw ok!
Password charged to:1234. Default password is 0000. Only 1SOS can set and change this
command
(5.24) Set APN (No need to set APN in china, But in HK , Taiwan, foreign country should set the
local service APN)
Format:06#0000#account name#Access Point Name#user name#user password
1SOS send SMS to the watch, for example:
06#0000#chana wap#cmwap#hhh#123
Feedback:: set apn ok!
Only 1SOS can set and change this command
(5.25)
)Call Management
SOS numbers send SMS to watch for example:: 77
When the watch receive this command, any other numbers cannot call except the three
SOS numbers can call the watch
SOS numbers send SMS to watch for example: 99
Allow all the normal phone numbers call the watch
(5.26)“Tel button” fast dial function and setting
Format: TEL1# TEL NUMBER
TEL2#TEL NUMBER
Normal mobile send sms to the watch, for example: TEL#138xx138008
Feedback: set TEL1 OK
Normal mobile send sms to the watch, for example: TEL2#138xx138009
Feedback: set TEL2 OK
When long press tel1 button , the watch will dial 138xx138008 directly, when long press tel2
button, the watch will dial 138xx138009
(5.27)
)Restore factory setting
1SS send sms to the watch, for example: 77#99#0000
Then clean all setting include user informations and so on
6. PC-WEB service platform
6.1
Login
Login the WEB of the service platform---- www.paxgps.com with a user name, password,
click "GO" to enter the platform interface.
The user name is the IMEI code of the watch (Method 1: watch IMEI number is attached to
the watch behind with15 digitals, Method 2: In the menu interface, long press the down
key to view the IMEI number)
Default password: 123456, you can change it on website.
6.2 Current location(need to set the SOS number and
platform tracking function)
Search the tracker name in the left equipment list, it will list the target updating position.
Different icon color different tracking way: “Blue
”
“Gray
”.
” “Yellow
” “Red
Tracking online
6.3
Historical track playback
Click the icon to view the detailed position and tracking time
Track Play back
6.4. GEO-FENCE
Click the "new electronic fence" button on the top left corner. There will be a circular fence
area display as the figure, the size range of electronic fence can be selected by dragging
edge of any shape region, platform will alarm when watch is beyond the fence area.
6.5.
Platform alarms
Click "message" menu on the top right corner of map to check all alarms.
7. Phone tracking platform
(7.1)
)Select Android smart phone “Unknown sources”
”
In the android smart phone—setting –security – “Unknown sources”, shown as the picture
(7.2)
)Software download address : www.paxgps.com into the website and click the watch
mobile terminal to download and install, or scan the QR code to download to the phone
(7.3)
)Open and login into the platform in smart phone
Insert the Account and password to login
The user name is the IMEI code of the watch (Method 1: watch IMEI number is attached to
the watch behind with15 digitals, Method 2: In the menu interface, long press the down
key to view the IMEI number)
Default password: 123456, you can change it on website.
(7.4)
)Tracking list
Check the watch status “all ”
“online”
“offline”
(7.5)
)Real –time tracking (Set SOS number and platform tracking function)
(7.6)
)Playback list
(7.7)
)Alarm message
8. FAQ
Question
Solution
Tracking Watch shows no services after
Starting-up
Please check the SIM card if inserted。
Watch cannot calling
Make sure the host SIM card whether open caller
ID display
The watch cannot send the location
information to the service platform
Please check the account of SIM card
Cannot get online information of Tracking
Watch on service platform
Please check the watch operating mode
Send SMS command
comfirmation by SMS
Confirm the SMS Editorial content format is
correct, and if the sender is SOS number
but
without
Single time location just with latitude and
longitude coordinates, no more details
description
Make sure if the GPRS transmission failure due
to SIM card arrears
QR code for smartphone tracking
GPS watch command software, scan
platform, scan and download
and download

advertisement

Related manuals

Download PDF

advertisement