Datalogic BC9030 BT Presentation Base, PM9500 PowerScan Bedienungsanleitung / Handbuch / Datenblatt
விளம்பரம்
விளம்பரம்
Bedienungsanleitung / Handbuch / Datenblatt
Sie benötigen einen Reparaturservice für Ihren Etikettendrucker oder suchen eine leicht zu bedienende Etikettensoftware?
Wir helfen Ihnen gerne weiter.
Ihr Partner für industrielle Kennzeichnungslösungen
Drucksysteme Janz & Raschke GmbH
Röntgenstraße 1
D-22335 Hamburg
Telefon +49(0)40 – 840 509 0
Telefax +49(0)40 – 840 509 29
[email protected]
www.jrdrucksysteme.de
Bedienungsanleitung / Handbuch / Datenblatt
Maßgeschneiderte Lösungen für den Etikettendruck und die Warenkennzeichnung
Seit unserer Gründung im Jahr 1997, sind wir erfolgreich als Partner namhafter Hersteller und als
Systemintegrator im Bereich der industriellen Kennzeichnung tätig.
Unser Motto lautet:
So flexibel wie möglich und so maßgeschneidert wie nötig.
Ich stehe mit meinem Namen für eine persönliche und kompetente
Beratung. Wir hören Ihnen zu und stellen mit Ihnen eine Lösung zusammen, die Ihren individuellen Anforderungen entspricht. Für Sie entwickeln unsere erfahrenen Techniker und Ingenieure neben
Etikettiermaschinen, maßgeschneiderte Komplettlösungen inklusive
Produkthandling, Automatisierungstechnik und Softwarelösung mit
Anbindung an Ihr Warenwirtschaftssystem.
Ich freue mich von Ihnen zu hören.
Bis dahin grüßt Sie
Jörn Janz
Hier finden Sie Ihren Ansprechpartner:
http://www.jrdrucksysteme.de/kontakt/
BC9030 Presentation Base
Quick Reference Guide
.
Datalogic USA, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2016-2017 Datalogic S.p.A. and/or its affiliates
All rights reserved.
Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website ( www.datalogic.com
) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. PowerScan is a trademark of
Datalogic S.p.A. and/or its affiliates, registered in many countries, including the U.S. and the E.U. All other brand and product names may be trademarks of their respective owners.
Patents
See www.patents.datalogic.com
for patent list.
See the Regulatory Addendum included with your product for additional regulatory, safety and legal information.
Table of Contents
Using the BC9030 Presentation Base .......................................................... 1
Regulating the Cradle Position .............................................................. 2
Mounting with the Metal Plate ............................................................. 4
Connecting and Disconnecting the Interface Cable ............................ 5
Configuration Bar Codes ........................................................................ 7
Resetting Standard Product Defaults .................................................. 7
Configuring the Interface ............................................................... 8
Keyboard Interface ....................................................................... 10
Scancode Tables............................................................................ 11
Datalogic Limited Factory Warranty ........................................................... 19
Ergonomic Recommendations .................................................................... 20
Support Through the Website ..................................................................... 21
LED
Aux
Host
Reader
Radio
Using the BC9030 Presentation Base
The BC9030 Presentation Base, when paired with one or more PowerScan™
PM9500 readers, builds a Cordless Reading System for the collection, decoding and transmission of bar code data. It can be connected to a Host PC via
RS-232, USB, or KBD Wedge, and is suited for single-cradle layouts.
The label on the cradle contains LED indicators and a multi-function button.
The LEDs signal the BC9030-BP status, as shown.
STATUS
Yellow On = BC9030-BP is powered through an external power supply.
Yellow On = BC9030-BP is powered by the Host.
Green On = the reader battery is completely charged.
Red On = the reader battery is charging.
Orange Blinking = reader battery fault - replace battery.
Red / Green Alternatively Blinking = charging error - see PRG.
Off = reader not in the cradle or not properly inserted.
Yellow Blinking = radio activity.
Quick Reference Guide 1
Installation
Installation
To set up your BC9030-BP cradle you must:
1.
Physically install the cradle.
2.
Make all system connections.
3.
Configure the BC9030-BP cradle.
The cradle package contains the following items:
• BC9030 BT Presentation Base
• BC9030-BT-BP Quick Reference Guide
(this manual)
• Metal Mounting Plate
• Hex Key
• Rubber Spacers
Regulating the Cradle Position
To regulate the position, use the hex key to unscrew the holder and slide it to the desired position.
2 BC 9xx0-BT Cradle
Installation
The rubber spacers included in the box can be used to fix the position of the cradle:
Quick Reference Guide 3
Installation
Mounting with the Metal Plate
1.
Affix the metal plate onto the desired mounting surface using the
two center screw holes (see Figure 1 on page 4
).
2.
Slide the tabs on the back of the cradle onto the metal plate as
3.
After aligning the tabs, push up to lock into place.
Figure 1. Mounting Plate on Wall
4 BC 9xx0-BT Cradle
System Connections
System Connections
Connections should always be made with power off!
CAUTION
The BC9030-BP cradle provides a multi-interface connector and a power supply connector as shown:
Power Supply
Multi-Interface
Connector
Connecting and Disconnecting the Interface Cable
The BC9030-BP can be connected to a Host by means of a multi-interface cable, which must be simply plugged into the Host connector, visible on the front panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the hole corresponding to the Host connector on the body of the cradle. Push down on the clip while unplugging the cable. Refer to the following figure:
Connecting/Disconnecting the Cable
Quick Reference Guide 5
BC9030-BP Configuration
RS-232
USB
NOTE
The power supply is required only if you need to connect the interface cable to a standard USB Port. The power supply is not required if you connect the interface cable to a PoweredUSB 12V or 24V port.
6
BC9030-BP Configuration
The BC9030-BP configuration can be performed in three ways: by using the
Datalogic Aladdin
™
software configuration program, by sending configuration strings from the Host PC via the RS-232 or USB-COM interface or by reading configuration bar codes with the PowerScan™ PM9500 reader.
Datalogic Aladdin™
Datalogic Aladdin
™
is a multi-platform utility program that provides a quick and user-friendly configuration method via the RS-232/USB-COM interface.
It also allows upgrading the software of the connected device (see the Datalogic Aladdin
™
Help On-Line for more details).
BC 9xx0-BT Cradle
BC9030-BP Configuration
Serial Configuration
By connecting the BC9030-BP to a PC through an RS-232 or USB-COM interface cable it is possible to send configuration strings from the PC to BC9030-
BP.
Configuration Bar Codes
Link the cradle and the reader using the procedures described in the Power-
Scan™ PM9500 Quick Reference. Once the pairing is complete, you can configure the BC9030-BP cradle by reading configuration bar codes in this manual.
To configure the BC9030-BP using the PowerScan™ PM9500 reader (paired to the cradle with the Bind command), follow the procedure according to the interface selected.
Resetting Standard Product Defaults
Reference the PRG for a listing of standard factory settings. If you aren’t sure what programming options are in your reader, or you’ve changed some
options and want the factory settings restored, scan the
bar code below to copy the factory configuration for the currently active interface to the current configuration.
Factory defaults are based on the interface type. Configure the reader for the correct interface before scanning this label.
NOTE
Standard Product Default Settings
Scanning this bar code will RESET all settings for the PowerScan
™
PM9500. Any customized settings that may have been applied to the reader will be lost.
CAUTION
To change the defaults refer to the PowerScan™ 9500 PRG, or to the Datalogic
Aladdin
™
Configuration program, both downloadable from the Datalogic website.
Quick Reference Guide 7
8
Selecting the Interface Type
Selecting the Interface Type
Upon completing the physical connection between the reader and its host, scan the appropriate bar code for your system’s correct interface type.
Configuring the Interface
Scan the programming bar code which selects the appropriate interface type for the system the reader will be connected to.
NOTE
Unlike some other programming features and options, interface selections require that you scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scanning an interface selection bar code.
Some interfaces require the scanner to start in the disabled state when powered up. If additional scanner configuration is desired while in this state, pull the trigger and hold for 5 seconds. The scanner will change to a state that allows programming with bar codes.
RS-232
RS-232 standard interface
Select RS232-STD
RS-232 Wincor-Nixdorf
Select RS232-WN
RS-232 for use with OPOS/UPOS/JavaPOS
Select RS-232 OPOS
BC 9xx0-BT Cradle
Selecting the Interface Type
USB
USB COM to simulate RS-232 standard interface
USB-COM-STD a
USB-OEM
(can be used for OPOS/UPOS/JavaPOS)
USB-OEM
USB Keyboard with standard key encoding
Select USB Keyboard
USB Keyboard with alternate key encoding
USB Alternate Keyboard
USB Keyboard for Apple computers
USB-KBD-APPLE a. Download the correct USB COM driver from www.datalogic.com
Quick Reference Guide 9
Selecting the Interface Type
Keyboard Interface
Use the programming bar codes to select options for
USB Keyboard and Wedge Interfaces.
KEYBOARD
AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/
Standard Key Encoding
Select KBD-AT
Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard
Select KBD-AT-NK
AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alternate Key
Select KBD-AT-ALT
Keyboard Wedge for IBM AT PS2 with alternate key encoding but without external keyboard
Select KBD-AT-ALT-NK
PC/XT w/Standard Key Encoding
Select KBD-XT
10 BC 9xx0-BT Cradle
KEYBOARD (continued)
Keyboard Wedge for IBM Terminal 3153
Selecting the Interface Type
Select KBD-IBM-3153
Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboard
Select KBD-IBM-M
Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make break keyboard
Select KBD-IBM-MB
Keyboard Wedge for DIGITAL Terminals
VT2xx, VT3xx, VT4xx
Select KBD-DIG-VT
Scancode Tables
Reference the PowerScan™ 9500 PRG for information about control character emulation which applies to keyboard interfaces.
Quick Reference Guide 11
Selecting the Interface Type
Country Mode
This feature specifies the country/language supported by the keyboard. Only these interfaces support ALL Country Modes:
• USB Keyboard (without alternate key encoding)
• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Std Key
Encoding
• Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard
• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 without Alternate Key
• Keyboard Wedge for IBM AT PS2 without alternate key encoding but without external keyboard
All other interfaces support ONLY the following Country Modes: U.S., Belgium,
Britain, France, Germany, Italy, Spain, Sweden.
COUNTRY MODE
ENTER/EXIT PROGRAMMING MODE
Country Mode = U.S.
Country Mode = Belgium
12
Country Mode = Britain
*
Supports only the interfaces listed in the Country Mode feature description
BC 9xx0-BT Cradle
COUNTRY MODE (continued)
Country Mode = Croatia*
Selecting the Interface Type
Country Mode = Czech Republic*
Country Mode = Denmark*
$CKBCO13(CR)
Country Mode = France
Country Mode = French Canadian
Country Mode = Germany
*
Supports only the interfaces listed in the Country Mode feature description
Quick Reference Guide 13
Selecting the Interface Type
COUNTRY MODE (continued)
Country Mode = Hungary*
Country Mode = Italy
Country Mode = Japanese 106-key*
$CKBCO14(CR)
Country Mode = Lithuanian
Country Mode = Norway*
Country Mode = Poland*
14
Country Mode = Portugal*
*
Supports only the interfaces listed in the Country Mode feature description
BC 9xx0-BT Cradle
COUNTRY MODE (continued)
Country Mode = Romania*
Country Mode = Spain
Country Mode = Sweden
Selecting the Interface Type
Country Mode = Slovakia*
Country Mode = Switzerland*
*
Supports only the interfaces listed in the Country Mode feature description
Quick Reference Guide 15
Selecting the Interface Type
Caps Lock State
This option specifies the format in which the reader sends character data.
This applies to keyboard wedge interfaces. This does not apply when an alternate key encoding keyboard is selected.
ENTER/EXIT PROGRAMMING MODE
Caps Lock State = Caps Lock OFF
Caps Lock State = Caps Lock ON
Caps Lock State = AUTO Caps Lock Enable
16 BC 9xx0-BT Cradle
Selecting the Interface Type
Numlock
This option specifies the setting of the Numbers Lock (Numlock) key while in keyboard wedge interface. This only applies to alternate key encoding interfaces. It does not apply to USB keyboard.
ENTER/EXIT PROGRAMMING MODE
Numlock = Numlock key unchanged
Numlock = Numlock key toggled
Quick Reference Guide 17
Technical Features
Technical Features
ELECTRICAL FEATURES
Supply Voltage
External Power
Host Power
Power Consumption
External Power
Host Power
Indicators
10 - 30 VDC
(Powered USB or RS232) max. 10 W (charging) * max. 10 W (charging) *
Ext. Power/Data yellow LED
Host Power/Data yellow LED
Reader batt. state green/red LED
Spare batt. state green/red LED
Radio yellow LED
Ethernet green LED (Ethernet models only) min. 3 hours with 2150 mAh Li-Ion battery min. 3 hours with 2150 mAh Li-Ion battery
Time of Recharge
External Power
Host Power
ENVIRONMENTAL FEATURES
Working Temperature
Radio
Battery Charging
Storage Temperature
Humidity
Protection Class
MECHANICAL FEATURES
Weight without metal plate
-20° to +50 C / -4 to +122 °F
0° to +40 °C / +32° to +104 °F
-20° to +70 C / -4 to +158 °F
90% non condensing
IP40
Dimensions (without antenna)
490gr
WHEN HORIZONTALLY POSITIONED:
Height 125mm
Length 215mm
Width 98mm
WHEN VERTICALLY POSITIONED:
Height 185mm
Length 85mm
Width 98mm
RADIO FEATURES
Frequency working center
Programmable Speed
Typical Range (in open air)
Max number of devices per base station
910MHZ 433MHZ
40 kb/s 19.2 kb/s
100 kb/s
500 kb/s (default)
100m
100 kb/s
500 kb/s (default) to 50m
(at 19.2kb/s)
16
* Having a switching regulator inside, the BC9030-BP draws the same power, regardless of the supply voltage. i.e. as the input voltage increases the current drawn decreases
18 BC 9xx0-BT Cradle
Datalogic Limited Factory Warranty
Datalogic Limited Factory Warranty
Warranty Coverage
Datalogic warranties this product against defects in workmanship and materials, for a period of 3 years from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term.
Products are sold on the basis of specifications applicable at the time of manufacture and
Datalogic has no obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration published by Datalogic for the product at the time of purchase (Warranty period).
Datalogic warrants repaired hardware devices against defects in workmanship and materials on the repaired assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the “factory default” configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the product to a designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor. Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located.
Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall be responsible for return shipment expenses for products which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual;
(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component damage or destruction of the whole unit, consumable items;
Quick Reference Guide 19
Ergonomic Recommendations
(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-
PLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION,
ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED
BY CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UN-
DER THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOM-
ER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES
WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS,
OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES RE-
GARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.
Ergonomic Recommendations
CAUTION
In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures
20 BC 9xx0-BT Cradle
Support Through the Website
Support Through the Website
Datalogic provides several services as well as technical support through its website.
Log on to www.datalogic.com
and click on the SUPPORT > General Duty Hand-
held Scanners
category link. From this page you can select your product model from the dropdown list which gives you access to:
Downloads including Data Sheets, Manuals, Software & Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair
Center contact information;
Service Program containing details about Maintenance Agreements;
Technical Support through email or phone.
Quick Reference Guide 21
Support Through the Website
NOTES
22 BC 9xx0-BT Cradle
www.datalogic.com
©2016-2017 Datalogic S.p.A. and/or its affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the
U.S.A. and the E.U.
Datalogic USA, Inc
.
959 Terry Street | Eugene, OR 97402 |USA
Telephone: (541) 683-5700 | Fax: (541) 345-7140
820094614 rrrrrrrrrrrrr (Rev D) rrrrrrrrrrrrr June 2017
பதிவிறக்கு
பொது இணைப்பு புதுப்பிக்கப்பட்டது
உங்கள் அரட்டைக்கான பொது இணைப்பு புதுப்பிக்கப்பட்டுள்ளது. You may view and manage your chat links after registration here.
ஆவண பொது இணைப்பு
விளம்பரம்