Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfill your needs for many years to
come. Scandinavian design combines clean lines, everyday functionality, and
high quality. These are key characteristics of all our products and the reason
they are greatly appreciated throughout the world.
To get the most out of your new dishwasher, we recommend that you read the
operating instructions before using it. The operating instructions also include
information on how you can help protect the environment.
Do you need this Use&Care Guide in spanish? Log onto
www.askona.com/customer-care to download.
¿Necesita esta Instrucciones de uso y cuidado en español? Entre en
www.askona.com/customer-care y descárguesela.
Operating Instructions
Dishwasher
ASKO D5636XLHS
Contents
Display panel
Important safety instructions
Before washing for the first time
Loading the dishwasher
Using the dishwasher
Settings
2
3
4
5
7
10
Care and maintenance instructions
Troubleshooting
Technical information
Service
Program chart
12
14
17
18
19
Display panel
1
2
3
4
5 6
7
8
9
10
1
On/Left-on mode
5
Rinse aid indicator
9
Delayed start
2
Program selector
6
Child lock (button lock)
10
Start/Stop
3
Program symbol
7
High temperature
4
Display
8
Long dry
The display panel is fitted with touch buttons with audible feedback (see the chapter Settings).
NOTE!
• Two minutes after the last button press, the display panel backlight enters energy saving mode. Close and reopen the door, or press
the On/Left-on mode button, to reactivate the display panel.
2
Important safety
instructions
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WARNING!
When using your dishwasher, follow basic precautions, including the following:
• Read all instructions before using the dishwasher.
• Use the dishwasher only for its intended function.
• Use only detergents or wetting agents recommended for
use in a dishwasher and keep them out of the reach of
children.
• When loading items to be washed:
– locate sharp items so that they are not likely to damage
the door seal, and
•
•
•
•
•
•
•
•
– load sharp knives with the handles up to reduce the risk
of cut-type injuries.
Do not wash plastic items unless they are marked “dishwasher safe” or the equivalent. For plastic items not so marked,
check the manufacturer’s recommendations.
Do not operate the dishwasher unless all enclosure panels
are properly in place.
Do not tamper with controls.
Do not abuse, sit on, or stand on the door or dish rack of
the dishwasher.
To reduce the risk of injury, do not allow children to play in
or on a dishwasher.
Under certain conditions, hydrogen gas may be produced
in a hot water system that has not been used for two weeks
or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for two weeks, before using the
dishwasher turn on all hot water faucets and let the water
flow from each for several minutes. This will release any
accumulated hydrogen gas. As the gas is flammable, do
not smoke or use an open flame during this time.
Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.
Read the grounding instructions in the installation instructions.
• Should a child swallow dishwasher detergent or rinse aid,
give plenty to drink immediately, i.e., one or two glasses of
milk or water. Do not try to induce vomiting. Seek medical
advice immediately: Call the National Capital Poison Center
at 1-800-222-1222.
• Always close the door and start the dishwasher as soon as
you put in the detergent.
• Always keep small children away from the machine when it is
open. There may be some detergent residue left inside the
machine.
• If dishwasher detergent gets in someone’s eyes, rinse them
with plenty of water for at least 15 minutes.
Activate child lock (Kid Safe™)
You can activate the child lock (button lock) to prevent children
from starting the dishwasher (see the section Settings).
Winter storage/Transport
• Store the dishwasher where the temperature remains above
freezing.
• Avoid long transport distances in very cold weather.
• Transport the dishwasher upright or laying on its back.
Overflow guard function
The overflow protection starts pumping out the machine and turns
off the water supply if the water level in the dishwasher exceeds
the normal level. If the overflow protection is triggered, turn off
the water supply and call the Customer Care Center.
Care and maintenance instructions
When cleaning the edge around the door, use only a slightly
damp cloth. Do not spray water around the edge! Moisture can
make its way into the lock, which contains electrical components.
Packing material
Please sort waste materials in accordance with local guidelines.
General
Disposal
• Do not run the dishwasher while you are out of the home.
• Do not store or use combustible materials, gasoline, or other
flammable vapors and liquids in the vicinity of this or any
other appliance.
• Disconnect electrical power to dishwasher before servicing.
• Repairs should be done by a qualified technician.
• When the machine has reached the end of its service life and
is to be disposed of, it should immediately be made unusable.
Pull out the power cable and cut it as short as possible.
• The dishwasher is manufactured and labeled for recycling.
• Contact your municipality for information about where and
how your dishwasher can be recycled correctly.
WARNING!
This product may contain chemicals known to the state of California to cause cancer or reproductive harm.
Child safety
TIP!
Dishwasher detergents and rinse aids are corrosive, so always
keep them out of reach of children.
3
Before washing for the
first time
Water supply
Setting the rinse aid dosage
The machine can be connected to either a cold 1) or a hot (max.
160 °F (70 °C)) water supply. The water pressure should be 4.2140 psi.
The section Settings describes how to set rinse aid amount. The
rinse aid amount can be set from
(Off) to
(High dose).
(Factory settings:
)
Program key
Increase the rinse aid dosage:
• If the dishes have water marks.
Some dishwashers include program keys in different languages.
Attach the program key in the appropriate language to the top
of the door.
Checking water hardness
Contact the local water utility to check the water hardness in your
area. This is important to determine how much detergent and
rinse aid to use.
Fill with rinse aid
Use rinse aid to improve wash and dry times. Also use rinse aid
to achieve clear and spotless results.
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add rinse aid to the level
marked max.
3 Wipe up any spilled rinse aid around the compartment.
4 Close the lid firmly.
Refill rinse aid indicator
When the rinse aid needs topping up, the above symbol lights
on the display.
NOTE!
After topping up, it may take a while before the symbol goes
out.
1)
4
Recommended.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Heavy foaming. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
Loading the dishwasher
Economic dishwashing
Typical load for 10 place settings
Run programs only with a full load
Wait until the dishwasher is fully loaded before running a program,
this way you save energy. Use the Rinse & Hold program to rinse
the dishes if there are any unpleasant odors while you wait for
the dishwasher to become fully loaded.
Run programs at a lower temperature
If the dishes are only lightly soiled, you can select a lower temperature with certain programs. See also the section Selecting
Options in the chapter Using the dishwasher.
Select a program with the option Short dry
To save energy, use Short dry. The drying result will be better if,
once the program is finished, you leave the door slightly open.
Do not rinse under running water
Simply scrape off large food particles before loading the dishwasher.
Choose a green detergent
Read the environmental declaration on the packaging!
Connect to cold water...
If you use oil or electricity to heat your home.
Upper basket with 10 place settings AHAM DW-1
Connect to hot water (max. 160 °F (70 °C))...
If you use district heating, solar power, or geothermal power to
heat your home. Choosing a hot water connection cuts program
times and reduces the dishwasher's electricity consumption.
Fragile dishes
Some cookware is not dishwasher safe. This can be for several
reasons. Some materials cannot withstand high temperatures,
others can be damaged by dishwasher detergent.
Fragile decoration
Porcelain with decoration on top of the glazing (the items feel
rough) should not be washed in a dishwasher.
Crystal/Glass
Position items so they do not touch during operation. Use a short
program with the lowest possible wash temperature. Select Short
dry. Do not wash fragile items in the dishwasher.
Glass washed at high temperatures can develop a gray film that
cannot be removed. Wash fragile glasses at a low temperature
with a small amount of detergent.
Silver
Silver and stainless steel items should not come into contact, as
the silver can become discolored.
Cutlery with glued handles
Some types of glue are not dishwasher safe. In such cases, the
handles may loosen.
Lower basket with 10 place settings AHAM DW-1
The baskets
The dishwasher includes a top cutlery tray, an upper basket, and
a lower basket with a cutlery basket.
The basket appearance may differ depending on the configuration.
Wood
Wooden items should only be washed in a dishwasher if marked
dishwasher safe.
Aluminum
Aluminum can lose its shine if washed in a dishwasher. However,
good quality aluminum pans can be washed in a dishwasher,
even if some of the shine will be lost.
Plastic items
Avoid washing plastic items that cannot withstand high temperatures.
5
Top cutlery tray
The top cutlery tray accommodates cutlery, ladles, whisks, and
other utensils.
Lower basket
Place plates, side plates, serving dishes, pots, and cutlery (in
the cutlery basket) in the lower basket.
Place pots and pans in the right rear of the lower basket for the
best cleaning results from the two rear spray nozzles
(WideSpray™), which are intended for these types of dishes.
Raising the top cutlery tray
1 Remove the top cutlery tray.
2 Pull the two locking handles forward on each side to raise the
top cutlery tray.
Lowering the top cutlery tray
1 Remove the top cutlery tray.
2 Slide the two locking handles down and back to lower the top
cutlery tray.
Foldable tines
Lower the foldable tines when washing large pots. Release the
foldable tines by pressing the catch inward before adjusting their
position.
Upper basket
Place glasses, cups, bowls, side plates, and saucers in the upper
basket. Place all soiled surfaces down! Place wine glasses on
the wine shelf. Place knives on the knife stand, if applicable.
Washing large plates
Move adjustable tines and their mounts to widen the distance
between the tine rows to adapt the lower basket to plates with a
diameter greater than 9 3/4" (25 cm).
Cutlery basket
Place cutlery with the handles facing down, except for knives,
and spread them out as much as possible. Ensure that spoons
do not stack inside each other.
The cutlery basket is best placed in the middle at the front of the
lower basket to best utilize dishwashing performance from the
unique spray nozzle (Power Zone Cutlery™), which is intended
for the cutlery basket.
6
Using the dishwasher
Add detergent
WARNING!
Knives and other pointed items must be placed with the points
down in the cutlery basket or horizontally in other baskets.
Fold-down section for small items
The cutlery basket has a fold-down section in the middle for small
items, or small shafts, such as electric whisk attachments.
a
b
c
1 Prewash detergent compartment
2 Main wash detergent compartment
NOTE!
Check that the spray arms can rotate freely.
We recommend that you use only unscented, granular automatic
dishwashing detergent. Using the wrong detergent could cause
flooding and/or damage your dishwasher. Do not use detergent
that has been wet and is clumped. Also, check the expiration
date on the container.
The amount of detergent needed can vary due to differences in
water hardness. To determine the water hardness in your area,
contact your local water utility or area water softening company.
The harder the water, the more detergent you may need. Refer
to the chart below for the recommended detergent amounts
based on water hardness. Remember, you should adjust the
amount of detergent you use by small amounts until you find the
correct amount. Twelve grains and higher is extremely hard water
and detergent alone may not be enough. You may need to use
a water softener to maximize the performance of your dishwasher.
Also, in areas with hard water (9+) you may need to wash at
lower temperatures to prevent hard water deposits from forming
in tank and wash system. In hard water areas, both the dishes
and the machine can develop a white or gray film after a while.
If this happens, run the Normal program with high temperature
and two tablespoons of citric acid or commercially available
dishwasher cleaner in the detergent compartment (with no dishes
in the machine).
NOTE!
We recommend that you do not add prewash detergent for the
program Quick.
NOTE!
If you use a dishwashing detergent with a rinse aid additive,
you should not fill the rinse aid dispenser. This could cause a
film on your dishes.
Recommended detergent amounts based on water hardness
Water hardness
Detergent amounts
Soft
(0-3 grains per gallon)
Prewash 1 teaspoon
Main wash 1 to 1-1/2 tablespoons
Medium
(4-8 grains per gallon)
Prewash 1 teaspoon
Main wash 1 to 2 tablespoons
Hard
(9+ grains*)
Prewash 1 teaspoon
Main wash 2 to 3 tablespoons
*12 grains and higher is extremely hard water.
7
WARNING!
Children must be supervised – dishwasher detergent is corrosive!
Hyg Hygiene
This program is recommended for baby bottles and cutting
boards when additional sanitation is required. The temperature
is high in the main and final rinse.
NOTE!
Use only dishwasher detergent! Liquid hand-washing detergent
must not be used as the foam that forms prevents the dishwasher from operating effectively.
Delicate
If the dishes are only lightly soiled, you can select Delicate. This
program is intended for glasses and porcelain that have just been
used and as such do not require such a powerful program.
Dishwasher tablets
Halve the tablet if it is difficult to close the dispenser lid. There is
a risk that the detergent will not be released properly if the lid is
tight and cannot open correctly.
This program can be used for fragile dishes. Select Short dry to
be extremely cautious. See also the section Fragile dishes in
Chapter Loading the dishwasher.
NOTE!
Dishwasher tablets are not recommended for short programs
(less than 75 minutes). Use powder or liquid dishwasher detergent instead.
3-in-1/All-in-one detergent
Read through the directions for these products carefully. If anything is unclear, contact the detergent manufacturer.
On/Left-on mode
Press and hold the On/Left-on mode button until the display lights
up.
Eco
This program is most effective in terms of combined energy and
water consumption.
Upper half
You can use this program if you only have cups and glasses that
need washing in the upper basket. Lightly soiled dishes can also
be placed in the lower basket.
Lower half
You can use this program when you only want to wash plates
and cutlery in the lower basket. Lightly soiled dishes can also be
placed in the upper basket.
Program selection
Press the Program selector one or more times until the desired
program symbol appears on the display.
Rinse & Hold
Use to rinse dishes while you wait for the dishwasher to become
fully loaded.
Sanitation
A program that is able to deal with most household germs and
particularly dirty dishware. This program uses a high final rinse
temperature for good drying results and to kill germs.
Selecting Options
NB: Do not load dishware that cannot withstand high wash or
rinse temperatures.
Normal
This program is recommended for daily, regular, or typical use
to completely wash a full load of normally soiled dishes, such as
plates, serving dishes, cups, and glasses. No options are recommended.
To select an option, press one of the option buttons. The field
under the button lights when the option is activated. The available
options depend on the selected program. Once you have started
the program, the options you selected are saved for the next time
you use the same program. An exception is the Delayed start
option.
High temperature
Activate this option for improved dishwashing results. The machine then uses a higher temperature for the main wash.
If you want to use the lower temperature, press again so that the
field under the button turns off.
Heavy
Program for very dirty dishes, such as pans, casserole dishes,
and oven dishes. If these dishes do not completely fill the dishwasher, you can add plates and other dishes that can withstand
a Heavy wash to fill out the load.
Quick
This program is used for glasses and porcelain that is lightly
soiled, such as coffee cups.
8
You can vary the temperature as shown below:
Sanitation:
150 °F (65 °C) / 160 °F (70 °C)
Normal:
124 °F (51 °C) / 150 °F (65 °C)
Heavy:
140 °F (60 °C)/150 °F (65 °C)
Quick:
85 °F (30 °C) / 140 °F (60 °C)
Delicate:
105 °F (40 °C) / 120 °F (50 °C)
Eco:
130 °F (55 °C) / 140 °F (60 °C)
you have started the dishwasher, the display indicates how much
program time remains. The remaining time is updated after the
water for the final rinse has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the ambient temperature, and other factors.
While the program is running, the time counts down and the remaining program time is shown on the display. The remaining
time is shown, for example, as 1:15, which means the program
will run for another 1 hour and 15 minutes.
Upper half: 130 °F (55 °C) / 150 °F (65 °C)
NOTE!
Lower half: 130 °F (55 °C) / 150 °F (65 °C)
During the first run of each program, the remaining time displayed can be slightly misleading, as the dishwasher is estimating the time. When you run the program a second time, the
dishwasher will calculate the remaining time based on the
previous duration of the program.
Long dry
Activate Long dry to increase final rinse temperature and dry time
to improve drying results. This causes a slight increase in energy
consumption. This option can be used with all programs except
Rinse & Hold.
If you want a program with Short dry, press again so that the field
under the button turns off.
Delayed start
When you select Delayed start, the dishwasher will start 1-24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press the
button several times – or hold it in – to set the desired number
of hours.
2 Press Start/Stop and the dishwasher counts down 1 hour at
a time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want to cancel
the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the program.
Start the dishwasher
Press and hold Start/Stop until the display shows
(the door
open symbol). This indicates that the dishwasher is ready to start.
Close the door properly and immediately, otherwise the dishwasher will not start. The display flashes three times with the remaining
time to indicate that the program has started.
Stopping or changing a program
If you want to change program after starting the dishwasher,
open the door then press and hold Start/Stop for three seconds.
Add more detergent if the lid of the detergent dispenser has
opened. Then choose a new program, press Start/Stop, and close
the door immediately.
WARNING!
The dishwasher door must not be open while a program is in
progress. If the door is open, "000" is shown on the display.
Press any button then press and hold Start/Stop for three seconds if you want to cancel a program.
If the dishwasher is turned off using
the On/Left-on mode button or due
to a power failure
If the dishwashing program is not finished, this is indicated by a
buzzer and "000" appearing on the display when power is restored
to the machine. Press any button and close the door immediately
for the dishwashing program to continue.
NOTE!
During drying, the program is interrupted if the power is cut or
the door is open for more than 2 minutes.
Once the program has finished
NOTE!
Once the program has finished, "End" appears on the display.
Close the door within four seconds, otherwise the dishwasher
will not start.
At the end of the program, one short signal will sound. Chapter
Settings describes how to change this function.
Time remaining
Once the cycle is complete, the dishwasher uses standby power
only. Shut off the water supply valve after every use.
Once you have selected a program and options, the display indicates how long the program took the last time it was used. Once
9
Settings
Do as follows to open the settings menu:
+
1.
First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the button.
2.
Press and hold the On/Left-on mode button until the display lights up.
3.
Within five seconds, press and hold the Program selector and the Long dry button.
4.
Release the buttons when the display shows
.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if you fail to open
the settings menu the first time.
Press to save the setting value and continue to the next setting.
Current setting.
Current setting value.
Press to browse between setting values.
You can now adjust the following settings:
Button press Options
(Off)
(On)
Settings
Description
Child lock
(Kid Safe™)
You can activate the child lock (button lock) option
to prevent children from starting the dishwasher.
Press the High temperature and Long dry buttons
simultaneously to temporarily deactivate the button
lock when you want to start the dishwasher. The
button lock is automatically reactivated after 2
minutes.
Press Start/Stop to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings menu.
(Off)
Buzzer volume
The dishwasher uses a buzzer to indicate when a
program is finished or when a fault has occurred.
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
10
Button press Options
(Off)
Settings
Description
Operation volume
This sound is used to confirm each button press.
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
LCD contrast
(Display on the front of the door)
For adjusting the contrast of the display on the front
door.
Press Start/Stop to save the setting value and continue to the next setting.
(Low)
LCD contrast
(Display on the panel)
For adjusting the contrast of the display on the
panel.
(High)
Press Start/Stop to save the setting value and continue to the next setting.
(Off)
Rinse aid
Rinse aid dosage setting.
(Low dosage)
(High dosage)
Press Start/Stop to exit the settings menu.
11
Care and maintenance
instructions
Coarse filter
NOTE!
The coarse filter traps larger food particles, which cannot get
past the drain pump. Empty the coarse filter as necessary.
The dishwasher must not be used without the filters in place!
1 Lift the coarse filter by the handle.
Dishwashing results may be affected if the coarse filter is incorrectly fitted.
2 Empty the coarse filter. Remember to replace it!
Drain pump
Coarse filter
The pump can be accessed from inside the dishwasher.
1 Cut the power to the dishwasher by unplugging the unit from
the power outlet.
2 Remove the coarse filter and pipe section.
3 Remove the small yellow drain pump access cover at the left
of the bottom drain (see illustration below).
Fine filter
Debris that collects on the fine filter is automatically rinsed away
during each wash. However, the fine filter and its pipe section
should be cleaned a couple of times a year.
1 Turn the handle counterclockwise once.
4 By inserting your finger into the hole, you can turn the pump
blades to release anything blocking the pump.
Fine filter
1x
2 Lift the pipe section straight up by the handle. Free the coarse
filter to clean the pipe section.
3 Remove and clean the fine filter.
5 Reinstall the access cover and filters.
4 Replace in reverse order. Check that the edges seal properly
when replacing the fine filter.
6 Plug the machine in again.
Pipe section
If the dishwasher still does not start and a whirring sound is
heard, the overflow protection has been triggered.
• Shut off the water.
• Unplug the unit from the power outlet.
• Call the Customer Care Center.
NOTE!
Do not forget to reinstall the drain pump access cover.
5 Lock the filter in place by turning the handle clockwise to the
stop position. The handle should point straight out from the
dishwasher.
Spray arms
Holes and bearings can become blocked. Remove debris using
a needle or similar item. The spray arms have holes on the bottom.
1x
12
Spray arms can be removed for cleaning. Remember to screw
them firmly back into place afterward.
Door
When cleaning the edge around the door, use only a slightly
damp cloth (with a little cleaner if necessary).
WARNING!
Do not use a spray bottle or the like around the door lock. This
is to ensure that water does not penetrate the door catch and
come into contact with the electrical components.
Lower spray arm
• Pull the lower spray arm straight up to release it.
Upper spray arm
• The upper basket must be removed before the upper spray
arm can be released. Extend the upper basket then rotate
each basket catch runner outward (see illustration). Remove
the basket.
Limescale deposits
The dishwasher tub is made of stainless steel and is kept clean
through normal use. However, if you have hard water, limescale
deposits may form in the dishwasher. If this happens, run the
Normal program with high temperature and two tablespoons of
citric acid or commercially available dishwasher cleaner in the
detergent compartment (with no dishes in the machine).
• Pull the upper spray arm straight up to release.
Top spray arm
• Remove the upper basket then release the top spray arm. See
section Upper spray arm.
• Remove the top cutlery tray. Push the top spray arm up and
turn the spray arm bearings counterclockwise to remove the
spray arm.
Display panel
Keep the touch buttons clean and free from grease. Wipe them
clean with a dry or slightly damp cloth. Never use cleaners – they
can scratch the surface. Use the On/Left-on mode button to turn
off the dishwasher before cleaning the touch buttons to avoid
activating any buttons unintentionally.
13
Troubleshooting
Display
Type of fault
Overfilling
1)
Action
1)
Call the Customer Care Center.
Water outlet fault 1)
See "Water remains in the dishwasher above the filters"
in the table below.
Water inlet fault 1)
Check that the water supply valve is on.
Inlet valve leakage 1)
Turn off the water supply valve and call the Customer
Care Center.
Turn off the machine with the On/Left-on mode button and then turn it on again to clear the error message from the display.
Problem
Possible causes
Action
The dishes are not clean.
The spray arms do not rotate.
Remove the arms and clean them.
Check that the dishes are not blocking the
spray arms.
Detergent is too old. Detergent is a perishable product.
Avoid large packages.
Incorrect detergent dosage.
Dose according to water hardness. Far too
much or far too little detergent can result in
poor dishwashing results.
Dishwashing program too weak.
Select a higher temperature or a more powerful program.
Dishes loaded incorrectly.
Do not cover dishes with large bowls or lids.
Avoid placing very tall glasses in the corners
of the baskets.
Glasses and cups have toppled over during Load the dishes securely.
the program.
Spots or films on the dishes.
The filter is not correctly fitted.
Screw the filter firmly into place. See the
section Care and maintenance instructions.
Incorrect rinse aid dosage setting.
See the sections Before washing for the first
time and Settings.
Too high temperature and/or too much deter- Wash crystal at a low temperature and with
gent can cause etching on crystal. Unfortu- a conservative amount of detergent. Contact
nately, this cannot be repaired, only prevent- the detergent manufacturer.
ed.
The dishes have a sticky white/blue film.
Rinse aid dosage setting too high.
Reduce the amount. See the sections Before
washing for the first time and Settings. If you
have very soft water, you may want to dilute
the rinse aid 50:50 with water.
Spots on stainless steel or silver.
Some types of food, such as mustard, may- Rinse off these types of food if not starting
onnaise, lemon, vinegar, salt, and dressings, the dishwasher immediately. Or why not run
can mark stainless steel if left for too long. the Rinse & Hold program?
All stainless steel can cause spots on silver Silver and stainless steel items should not
if they come into contact during dishwashing. come into contact during dishwashing.
Aluminum can also cause spots on dishes.
14
Spots left after washing.
Lipstick and tea can be difficult to wash off. Use a detergent with a bleaching agent.
Rattling sound when dishwashing.
The dishes are not correctly placed or the
spray arms are not rotating.
Check that the dishes are placed securely.
Spin the spray arms to make sure they can
rotate.
Problem
Possible causes
Action
The dishwasher does not start.
The Start/Stop start button has been pressed Press and hold Start/Stop until the display
for too short a time.
shows
(the door open symbol). This
indicates that the dishwasher is ready to start.
The door is not closed properly or was not
closed immediately after pressing the
Start/Stop button.
Close the door within four seconds, otherwise
the dishwasher will not start.
A fuse/circuit breaker has been tripped.
Check.
The plug is not plugged into the power outlet. Check.
The water supply valve is turned off.
Check.
Overflow/leaks.
Check.
A whirring sound (the drain pump) is heard Turn off the water supply valve. Pull out the
from the dishwasher and does not stop when plug and call the Customer Care Center.
the power is cut with the On/Left-on mode
button.
Check that the Delayed start option has not Press and hold Start/Stop for three seconds
been selected.
if you want to cancel the Delayed start option.
1 minute appears on the display.
The program is taking longer than estimated. None. Next time the program is run, the corrected time will be displayed.
"000" is shown on the display.
The dishwasher has been switched off using Press any button and close the door immedithe On/Left-on mode button or due to a
ately for the dishwashing program to continpower failure.
ue.
The dishwasher door is open or has been
opened while a program is in progress.
If you want the dishwashing program to
continue, press any button and close the
door immediately.
If you want to cancel the dishwashing program, press any button then press and hold
Start/Stop for three seconds.
Water remains in the dishwasher above the Blocked drain hose.
filters.
Bad odor in dishwasher.
Loosen the drain hose from where it terminates. Check that no debris has clogged the
hose. Is the cone-shaped part of the drain
boot cut to the maximum size of the fitting
where it attaches?
Kink in drain hose.
Check that the hose is free from kinks and
sharp bends.
The filters are blocked.
Clean the coarse and fine filters.
Debris in the drain pump.
Clean the drain pump. See the section Care
and maintenance instructions.
Dirt around the seals and in corners.
Clean with dish brush and low foaming
cleaner.
Low temperature programs have been select- Run a program with a higher temperature
ed for a prolonged period.
about once a month.
15
Problem
Possible causes
Action
The dishes are not dry enough.
Drying power too low.
Activate the Long dry option.
The dishwasher is not fully loaded.
Fully load the dishwasher.
Rinse aid needs topping up or dosage is set Top up with rinse add or increase the rinse
too low.
aid dosage. See the sections Before washing
for the first time and Settings.
Open the door a little once the program has
finished.
Cannot close door.
The baskets are not correctly positioned.
Check that the baskets are correctly positioned horizontally.
Check that the dishes are not blocking the
baskets from sliding properly into place.
The touch buttons do not react when
pressed.
You have pressed the touch buttons too soon Wait a moment then try again.
after opening the door.
Dirt on the touch buttons.
Clean with a dry or slightly damp cloth.
Open the door until the display illuminates or
If this symbol appears on the display, close the door and wait 30 seconds. Then
open the door.
the door is not open enough.
Child lock (button lock) activated.
16
See the section Settings.
Technical information
Technical data
Height:
32-1/4'' - 34'' (819-864 mm)
Width:
24" (610 mm)
Depth:
22-7/8" (581 mm)
Weight:
108 lb (49 kg) 1)
Water pressure:
4.2–140 psi
Electrical connection: See serial number plate
Rated power:
1)
See serial number plate
Weight can vary due to different specifications.
17
Service
Limited Warranty – Residential
Appliances
ASKO Distribution North America, LLC. (“ASKO”) warrants to the
original purchaser (the “ASKO Customer”) of the ASKO product
(the “ASKO Product”), who purchased the ASKO Product from
a distributor, dealer, manufacturer’s representative or other seller
who has been authorized by ASKO, that this ASKO Product is
free of defects in materials and/or workmanship, subject to the
terms and conditions set forth herein. This Limited Warranty
covers parts and labor, except as set forth in this Limited Warranty. Service must be provided by an authorized ASKO service
company. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS
LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. This Limited Warranty is valid only when the ASKO
Product is used in the country in which it was purchased. Proof
of original purchase date is required to obtain service under this
Limited Warranty.
Residential ASKO Products Used Exclusively for
Household/Personal Purposes:
Two (2) Years limited Warranty – Any warranty service claims for
residential ASKO Products must be filed with ASKO within two
(2) years from date of purchase. Service will be provided during
normal business hours.
Residential ASKO Products Not Used Exclusively for
Household/Personal Purposes or used Commercially or used
in Marine, Mobile or Aeronautical Applications:
One (1) Year limited Warranty – Any warranty service claims for
ASKO Products not used exclusively for household and personal
use, or used commercially or used in marine, mobile, or aeronautical applications must be filed with ASKO within one (1) year
from date of purchase. Service will be provided during normal
business hours.
Items excluded from warranty
This limited warranty does not cover:
1 Replacement parts or repair labor if the ASKO Product is used
in a manner that is inconsistent with published user or operator
instructions and/or installation instructions.
2 Service calls to correct the installation of the ASKO Product,
to instruct you on how to use the ASKO Product, to replace
or repair house fuses, or to correct house wiring or plumbing.
3 Consumable items and parts, such as filters.
4 Damage resulting from accident, alteration, misuse, abuse,
negligence, fire, flood, acts of God, improper use, improper
installation, installation not in accordance with electrical or
plumbing codes, or use of products not approved by ASKO,
as well as any attempted repair by other than authorized ASKO
service companies.
5 Cosmetic damage, including scratches, dents, chips or other
damage to the finish of the ASKO Product, unless such damage results from defects in materials or workmanship and is
reported to ASKO within 5 days from date of purchase.
6 Pickup and delivery. The ASKO Product is intended to be repaired in your home.
7 Repairs to parts or systems resulting from unauthorized
modifications made to the ASKO Product.
8 Expenses for travel and transportation for product service if
the ASKO Product is located in a remote area where service
by an authorized ASKO service company is not available.
9 The removal and reinstallation of the ASKO Product if it is installed in an inaccessible location or is not installed in accordance with ASKO’s published installation instructions.
18
10 Replacement parts or repair labor on ASKO Products with
original model/serial numbers that have been removed, altered
or cannot be easily determined.
Disclaimer
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED
HEREIN. EXPRESSLY DISCLAIMED ARE ALL OTHER EXPRESS
AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow exclusion or
limitations regarding warranty rights. This Limited Warranty gives
you specific legal rights and you may have other rights that vary
from jurisdiction to jurisdiction. Attempted repair by any person
other than an authorized ASKO service company will void this
Limited Warranty.
Limitation of liability
IN NO EVENT SHALL ASKO OR THE MANUFACTURER AND
THEIR RESPECTIVE PARENTS, SUBSIDIARIES AND AFFILIATES
BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, EXEMPLARY,
PUNITIVE OR SPECIAL DAMAGES. IN NO EVENT SHALL ASKO
OR THE MANUFACTURER AND THEIR RESPECTIVE PARENTS,
SUBSIDIARIES AND AFFILIATES BE LIABLE FOR DAMAGES
OTHER THAN ACTUAL DAMAGES AND IN NO EVENT FOR
DAMAGES IN EXCESS OF THE PRICE PAID FOR THE ASKO
PRODUCT AS TO WHICH A CLAIM IS MADE. Some jurisdictions
do not allow the exclusion or limitation of incidental, consequential
or other damages, so these limitations and exclusions may not
apply to you. This Limited Warranty gives you specific legal rights.
You also may have other rights that vary from jurisdiction to jurisdiction.
Troubleshooting & ASKO Customer
Care
If you think you need repair service, first see the Troubleshooting
section of the Use & Care Guide. If you are unable to resolve the
problem after checking Troubleshooting, then additional help
can be obtained by calling ASKO Customer Care at 1-800-8981879.
Read chapter Troubleshooting before contacting the Customer
Care Center. Make a note of the details on the serial number plate
positioned on the right inside the dishwasher. Make a note of the
service number (1), item number (2) and serial number (3).
Service no.
ART. NO.
SERIAL NO.
1
2
3
Service after expiration of limited
warranty
For information about obtaining parts and labor after expiration
of this Limited Warranty or arising outside the scope of this Limited
Warranty, please contact ASKO Customer Care at 1-800-8981879. After your purchase and prior to first use of the ASKO
Product, register your ASKO Product with ASKO by utilizing the
address information below. Should you need further assistance
as well, contact us at the address information below:
ASKO Distribution North America, LLC
Customer Care Center, PO Box 44848, MADISON WI 53744
1
Lower half
Connection to hot water, approx. 120 °F (50 °C).
The energy label performance figures are based on this program.
0.01
0.6
0.6
0.5
0.5
0.9
0.1
0.7
0.4
0.9
4)
0:06
2:05
2:05
2:15
1:35
0:50
0:20
2:10
2:00
3:00
Connection to cold water, approx. 50 °F (10 °C). (A cold water supply is recommended.)
0.01
1.2
1.2
0.8
0.9
1.5
0.2
1.3
0.8
1.5
Energy
(approx. kWh)
3)
0:06
2:25
2:25
2:30
1:50
1:20
0:20
2:25
2:20
3:15
Energy
Dishwashing
(approx. kWh) time
(approx.
hrs:min)
Hot water 3)
1)
Consumption values vary depending on the water supply temperature, the ambient temperature, the size of the load, the selected options, and more.
--- °F
140 °F
140 °F
120 °F
120 °F
160 °F
85 °F
150 °F
117 °F
150 °F
Dishwashing
time
(approx.
hrs:min)
Cold water 2)
Consumption values
2)
1
2
2
2
2
2
2
2
2
2
Final rinse
temperature
(°F)
1)
Rinse & Hold
130 °F
1
Upper half
130 °F
130 °F
105 °F
160 °F
85 °F
140 °F
124 °F
150 °F
Main wash (°F) Number
of rinses
Eco
Delicate
Hyg Hygiene
1
2
Heavy
Quick
1
Normal 4)
Prewashes
2
Options
Sanitation
Program
0.8
3.7
3.7
2.9
3.7
2.6
2.6
3.2
3.8
4.7
Water consumption
(gallon)
Program chart
19
Quick guide
Load the baskets
1.
(See page 5.)
Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off
large food particles before loading the dishwasher.
Check that the spray arms can rotate freely
2.
Check also that the water supply valve is on.
Add detergent
3.
4.
The detergent compartment has a small compartment for prewash and a large compartment for
the main wash. (See page 7.)
Press and hold the On/Left-on button until the display illuminates
Check/Add rinse aid
5.
Fill rinse aid for optimal washing and drying results. (See page 4.)
Refill rinse aid indicator.
Select a program and any options
6.
(See page 8.)
7.
www.askona.com
en (05-16)
Item No.: 565976. Rev. 01. We reserve the right to make changes.
Press and hold Start/Stop, close the door
Download PDF

advertising