A
& rchitect
E
ngineer Specification
Bid-Spec
1.0
VideoEdge™
4-channel IP Encoder
Description
The VideoEdge™ IP 4 Channel Encoder is a high performance video encoder capable of serving multiple video streams at 4CIF resolution and up to 30 images per second per stream. The VideoEdge™ IP 4 Channel Encoder is the first video encoder using
American Dynamics Active Content Compression (ACC) that is compatible with the
Intellex IP Digital Video Management System. This combination offers powerful new solutions to security applications using Intellex IP, Network Client, and the
VideoEdge™ IP 4 channel Encoder. This application note explains the tradeoffs inherent in using IP video and provides guidance on optimal configuration of the
VideoEdge™ IP 4 channel Encoder with Intellex IP
The encoder assembly dimensions shall be 8.25″(206.9mm)L x 4.5″(112.7mm)W x
1.7″(43.1mm)H. Both standalone and rack mount options shall be available.
The encoder shall support Ethernet 10/100 Base-T via a RJ45 connection with support for HTTP, TCP/IP and DHCP client protocols.
The encoder shall support 4 RJ45 serial port connections. Ports 1 through 4 shall support RS-232 at 230 kbps maximum. The encoder shall also support RS-422 and
RS-485 2 and 4 wire at 230 kbps maximum via the terminal block. The terminal block shall also support Sensornet 2 wire.
The encoder shall support live video via the Intellex IP or via the hosted web page of the encoder device.
The encoder shall support configuration via the hosted web pages of the encoder device.
The encoder shall support bandwidth throttling between 30 kbps and 4 Mbps that is configured through the client interface.
The encoder shall support a maximum of 4 channels of analog video input in 4CIF at
30 IPS for NTSC and 4CIF at 25 IPS for PAL.
The encoder shall support 4 composite video inputs for either NTSC or PAL standards. The connectors shall be BNC standard female connectors for the 4 composite inputs on the encoder.
The encoder shall support event input by 4 TTL Level (3.3Vmax) active low and
Event Outputs by 6 open-collectors that support 12 Volts maximum and 100 mA maximum.
The encoder shall operate from 12VDC and Power over Ethernet. Power connection shall support a 2.1mm and PoE on a RJ45 Ethernet connector.
The encoder shall be safety compliant with UL60950-1, CSA C22.2 No. 60950-1, with TUV EN60950-1, and with CB IEC60950-1 for safety. EMC compliant with
USA FCC Part 15 class A, Canada ICES-003/NMB-003 class A, Europe EN55022 class A, EN50130-4 and Australia / New Zealand AS/NZS CISPR22. The encoder shall also be RoHS compliant to comply with European directive 2002/95/EC.
8200-0806-10 A0
Page 1 of 3
Architect & Engineer Specification
Quick-Spec
VideoEdge™
4-channel IP Encoder
Vandal resistant housing/camera must meet the following operating requirements:
Power
Supply voltage........................... 12VDC and Power over Ethernet
Connector .................................. 2.1mm and PoE on RJ45
Consumption ............................. 12W max. (1.0 A at 12 VDC)
Physical
Environment .............................. Operating – 32ºF to 122ºF (0ºC to 50ºC)
Humidity.................................... 95% non condensing at 122ºF (50ºC)
Size ............................................ 8.25″(206.9mm)L x 4.5″(112.7mm)W x
1.7″(43.1mm)H
Network
Interface..................................... Ethernet 10/100 Base-T
Connector .................................. RJ45
Protocols.................................... HTTP, TCP/IP, DHCP (client)
Serial Ports
Electrical Levels
Port 1 ........................................ RS-232 (230 kbps max.)
Port 2 ........................................ RS-232/RS-422/RS485 2/4 wires (230 kbps max.)
Port 3 ........................................ RS-232 (230 kbps max.)
Port 4 ........................................ RS-232 (230 kbps max.)
Port 5 ........................................ Sensornet 2 Wire
.................................................. All ports protected against accidental Ethernet cable insertion
Connectors
Port 1 ........................................ RJ45
Port 2 ........................................ RJ45 RS-232 (RS-422 RS-485 terminal block connector)
Port 3 ........................................ RJ45
Port 4 ........................................ RJ45
Port 5 ........................................ Sensornet connector (terminal block)
8200-0806-10 A0
Page 2 of 3
Architect & Engineer Specification
VideoEdge™
4-channel IP Encoder
Video
Input .......................................... 4 composites, 1Vpp into 75 Ohms
Standard..................................... NTSC or PAL
Connector .................................. BNC Female
Bandwidth ................................. Configured via the client interface
Access........................................ Live video via Hosted Web Page, Intellex IP
Events
Event Input ................................ 4 TTL Level (3.3Vmax) active low
Event output .............................. 6 open-collector, 12 V max. 100 mA max.
Regulatory
Emissions .................................. FCC part 15 Class A
CE: EN55022 Class A
ICES-003/NMB-003 Class A
Immunity ................................... CE: EN50130-4
Safety......................................... UL: UL60950-1 CSA C22.2 No. 60950-1
RoHs
Complies with European directive 2002/95/EC
Warranty
Minimum one year
8200-0806-10 A0
Page 3 of 3
