Charging the Belkin QODE Ultimate
Keyboard Case
IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth® devices previously connected to it. Also, if the keyboard layout of your device is different from that of your Hardware Keyboard, you must change the keyboard language to update the output. Modifying only the iPad® or mobile phone language, will not change the keyboard output. For more information on how to change this o n your Android™ device, click here . For more information on how to change this on your iOS device, click here .
Charging the Belkin QODE Ultimate Keyboard Case is easy with its micro-USB cable. The Belkin
QODE Ultimate Keyboard Case variants are the following:
Belkin F5L151 (for iPad Air®)
Belkin F5L178 (for iPad Air® 2)
Belkin F5L149 (for iPad® 4th and 3rd generations and iPad® 2)
To charge the Belkin QODE Ultimate Keyboard Case, connect one end of the micro-USB cable to the QODE Ultimate Keyboard Case and connect the other end to a computer or to a USB wall adapter. Make sure that the cable is in good condition and both ends are properly connected.
The indicator lights of the Belkin QODE Ultimate Keyboard will indicate when it is time to charge.
If it has low battery charge – An orange indicator light will flash once every second for
1 minute.
If it is charging – The orange indicator light turns ON during charging and turns OFF when charging is complete.
QUICK TIP: The Belkin QODE Ultimate Keyboard Case requires approximately 2.5 hours of charging for first time use. The keyboard will be in standby mode after 10 seconds of inactivity to prevent the battery's power from draining.
For more information about the Belkin QODE Ultimate Keyboard Case, click on the links below:
onnecting the Belkin Keyboard via
Bluetooth®
Whenever you need to use a different tablet with your Belkin Keyboard, pairing must be performed to ensure that your keyboard is in control of the correct device.
IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth® devices previously connected to it. Also, if the keyboard layout of your device is different from that of your Hardware Keyboard, you must change the keyboard language to update the output. Modifying only the iPad® or mobile phone language will not change the keyboard output. For more information on how to change this on your Android™ device, click here . For more information on how to change this on your iOS device, click here .
The steps below will guide you on how to properly pair your device with the keyboard via Bluetooth.
NOTE: Make sure the keyboard and tablet are close to each other before pairing. iPad
Android iPad
Step 1:
On your iPad tap the
Step 2:
Tap General.
Step 3:
Tap Bluetooth.
icon from the Home Screen.
Step 4:
Toggle Bluetooth to ON.
Step 5:
Turn ON the Belkin Keyboard then press and hold the Pair key.
NOTE: The Pair key may be different depending on the model of your keyboard. Try to look for the
or key.
Step 6:
The keyboard will show up under Devices on the iPad. Select Belkin Bluetooth Keyboard.
Step 7:
A code will appear on the screen. Enter this code on the keyboard and press [Enter].
A message will pop up when pairing is successful.
Android
Step 1:
Open the Settings on your phone.
Step 2:
Switch Bluetooth to ON.
Step 3:
Turn ON the keyboard then press and hold the Pair key.
NOTE: The Pair key may be different depending on the model of your keyboard. Try to look for the or key.
Step 4:
Turn ON Bluetooth connection in Settings > Bluetooth on your Android device, then scan for nearby devices.
Step 5:
Select Belkin Bluetooth Keyboard.
The Android device will notify you when the pairing is successful. If pairing fails, switch the keyboard
OFF and ON before repeating the steps above.
NOTE: If you are pairing a Kindle Fire ™ with your Belkin Keyboard, click here .
Setting up and connecting the Belkin QODE
Ultimate Keyboard Case for the first time
The Belkin QODE Ultimate Keyboard Case connects with your iPad ® tablet wirelessly through
Bluetooth ® technology, eliminating the fuss of using cables.
IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth devices previously connected to it. Also, if the keyboard layout of your device is different from that of your Hardware Keyboard, you must change the keyboard language to update the output. Modifying only the iPad or mobile phone language will not change the keyboard output. For more information on how to change this on your Android™ device, click here . For more information on how to change this on your iOS device, click here .
QUICK TIP: Refer to the table below for the compatibility of your Belkin QODE Ultimate Keyboard
Case.
Model
Number
Model Name Compatibility
F5L149
QODE Ultimate Keyboard Case for iPad (4th & 3rd gen) and iPad
2 iPad (3rd and 4th gen) and iPad 2
F5L151
QODE Ultimate Keyboard Case for iPad Air iPad Air ®
F5L178
QODE Ultimate Keyboard Case for iPad Air 2 iPad Air 2
This article will guide you on how to set up and connect your Belkin QODE Ultimate Keyboard Case for the first time.
Setting up the Belkin QODE Ultimate Keyboard Case
Connecting the Belkin QODE Ultimate Keyboard Case
Setting up the Belkin QODE Ultimate Keyboard Case
Step 1:
Charge the Belkin QODE Ultimate Keyboard Case for approximately 2.5 hours before first use. For instructions, click here .
Step 2:
Insert the iPad and snap the clasps.
You have now successfully set up the Belkin QODE Ultimate Keyboard Case.
Connecting the Belkin QODE Ultimate Keyboard Case
Step 1:
Adjust the iPad to your preferred viewing angle.
IMPORTANT: Make sure that the magnet at the bottom of the screen connects to the magnet on the base.
Step 2:
On the keyboard, hold down the fn and <...> pair buttons to connect to your iPad, or from the Home screen, tap the Settings icon.
Step 3:
On the Settings menu, tap Bluetooth.
NOTE: On some iPad versions, from the Settings menu, tap General > Bluetooth.
Step 4:
Tap the toggle switch to turn ON Bluetooth.
Step 5:
The keyboard will show up under Devices on the tablet. Select Belkin Ultimate Keyboard to connect.
NOTE: This process may take some time.
Now that you've successfully connected to your iPad, the keyboard will automatically turn ON when the case is set to the viewing position.
NOTE: If your iPad’s Bluetooth is turned ON, the Belkin QODE Ultimate Keyboard Case will automatically turn ON. If you will use another iPad, you will have to connect to the Keyboard Case again.
If you have trouble with connecting your Belkin QODE Ultimate Keyboard Case, click here .
