HP ProLiant DL160 Gen8

QuickSpecs

Overview

HP ProLiant DL160 Gen8

The HP ProLiant DL160 Gen8 is a dual-socket, high-performance, dense rack server with enhanced manageability and scalability suited for High Performance Computing (HPC) environments, web serving and other hyperscale environments.

Front View:

1.

Access panel

2.

Power supply (500 Watts multi-output - standard, common slot power supply factory installable options available)

3.

Up to two Intel® Xeon® E5-2600 Series processors

4.

FlexibleLOM slot

5.

Up to 24 DIMM slots: DDR3 Registered (RDIMM), Load

Reduced (LRDIMM) or Unbuffered (UDIMM) memory

6.

Optical Disk Drive Bay

7.

Serial label pull tab

8.

(2) Front USB connectors

9.

UID LED button

10.

Power On/Standby button

11.

Health LED

12.

Aggregate network LED

13.

Up to 4 LFF SAS/ SATA Hard drives

14.

Up to seven Non hot plug redundant Fans

Rear View:

1.

PCIe 3.0 I/O slot

2.

Integrated Lights-Out Management Engine port

3.

1 GbE LAN port for NIC 1 (RJ-45)

4.

1 GbE LAN port for NIC 1 (RJ-45)

5.

Torx tool

6.

Power supply cable socket

7.

Serial connector

8.

Video connector

9.

USB connectors

10.

UID LED button

11.

FlexibleLOM slot

What's New

Support for NHP LFF CTO Chassis

Includes HP Dynamic Smart Array B120i controller

DA - 14282 Worldwide — Version 9 — August 13, 2012 Page 1

QuickSpecs

Standard Features


NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory

Integrated Models" section.

Processor

One of the following depending on Model

Eight -Core Processors

Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/8GT-s QPI/130W, DDR3-1600, HT, Turbo2- 4/4/5/5/5/7/8/8)





Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/8.0 GT-s QPI/70W, DDR3-1600, HT, Turbo2-

2/2/3/3/4/4/5/5)

Six-Core Processors

Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/8GT-s QPI/130W, DDR3-1600, HT, Turbo2- 3/3/3/4/5/6)

Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)


Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/8.0GT-s QPI/60W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)


Quad- Core Processors

Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/6.4GT-s QPI/80W)

Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)

Dual- Core Processors

Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/8.0GT-s QPI/80W, DDR3-1600, HT, Turbo2- 5/5)

NOTE: Up to 2 processors supported.

NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.

NOTE: Turbo 2 indicates the maximum potential bin increments when using Intel® Turbo Boost

Technology, with 8, 7,6,5,4,3,2 and 1 cores active DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed (options for

1600, 1333, 1066MHz).

NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the

Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =

Processor SKU, x = L for low power SKUs and v# (not yet designated) = version number.

Cache Memory


20MB (1x20MB) Level 3

NOTE: For Eight-core processors.


NOTE: For Six-core processors.


NOTE: For Quad-core processors.

5MB (1x5MB) Level 3

NOTE: For Dual-core processors.

NOTE: All processor models above list the L3 Cache associated with that particular processor.


QuickSpecs

Standard Features

Chipset


Intel® C600 Chipset

Intel® E5-2600 processor Family

NOTE: For more information regarding Intel® chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/

Upgradeability

Upgradeable to two processors (16 Cores)

Up to 24 DIMM slots available for higher Memory capacity

Up to 8 SFF Hard Drive Bays; Or 4 LFF Drive Bay

2 PCIe Generation 3 IO slots for additional communications and storage expansion

Optical Drive Bay

On System Management

Chipset

HP iLO (Firmware: HP iLO 4)

NOTE: For more information, visit: http://www.hp.com/go/ilo .

Memory Protection

Memory


Advanced memory protection

Lockstep Mode

Type HP SmartMemory

PC3-10600R Registered DDR3 (1333MHz)

DIMM Slots Available 24 DIMM slots

Standard (Entry Models) 4 GB (1 x 4 GB) RDIMM

Standard (Base Models) 8 GB (2 x 4 GB) RDIMM

Standard (Performance /

Energy Star Models)

16 GB (4 x 4 GB) RDIMM

Maximum (RDIMM)

Maximum (LRDIMM)

384 GB (24 x 16 GB)

768 GB (24 x 32 GB)

Maximum (UDIMM) 128 GB (16 x 8 GB)

NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant

Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory

QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html

NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.

NOTE: If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available. For maximum speed on some memory options on 16 DIMM slots may be populated.

NOTE: Depending on the memory configuration and processor model, the memory speed may run at

1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online Memory

Configuration Tool at: www.hp.com/go/ddr3memory-configurator .


QuickSpecs

Standard Features

Network Controller

HP NC361i Integrated Dual Port Gigabit Server Adapter


Expansion Slots #

1

2

Technology

PCIe 3.0

Bus Width

X16

Connector Width

x16

*

Form Factor

Half length, full height or Full length, full height

PCIe 3.0

X8 x8 Low Profile

NOTE: *Indicates the number of physical electrical lanes running to the connector.

Notes

Internal only

NOTE: In order to access expansion slot #2 (the low profile internal only slot), expansion slot #1 may only be populated with a half length, full height form factor card. If full length card is installed on the slot #1, low profile internal only slot will be inaccessible.

HP Server ROM

Storage Controller


HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.

HP ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.

HP ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor.

Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.

HP's ProLiant ROM is used to configure the following:

Processor and chipset status registers

System memory, memory map, and memory initialization

System hardware configuration (Integrated PCI devices and optional PCIe cards).

Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).

NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide: http://www.hp.com/support/rbsu .

Entry Models

Base Models

Performance Models

HP Dynamic Smart Array B120i controller


HP Smart Array P420/1GB FBWC controller

NOTE: Available upgrades: 512MB FBWC for B120i, 2GB FBWC for P420 Controller/ 1GB FBWC controller

NOTE: HP Dynamic Smart Array B120i controller supports up to 3Gb/s speed in HP ProLiant DL160 Gen8.

HP Smart Array controller is required in PCIe slot to achieve 6Gb/s.


QuickSpecs

Standard Features

Internal Storage Devices Diskette Drives

Optical Drives

Drive Bays


Maximum Internal

Storage


Interfaces

Via USB only

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

Up to 4 Hot plug SAS/SATA 3.5" drives

Up to 8 Hot plug SAS/SATA 2.5" drives


Hot Plug LFF SATA

Hot Plug LFF SATA SSD

Hot Plug LFF SAS

Hot Plug SFF SATA

12.0TB

1.6TB

12.0TB

8.0TB

Hot Plug SFF SATA SSD

Hot Plug SFF SAS

3.2TB

8.0TB

Hot Plug SAS SSD 6.4TB

Non-Hot Plug LFF SATA 12.0TB

Non-Hot Plug LFF SAS 2.4TB

4 x 3TB

4 x 400GB

4 x 3TB

8 x 1TB

8 x 400GB

8 x 1TB

8 x 800GB

4 x 3TB

4 x 600GB

Network RJ-45(Ethernet) 2 NIC ports, 1 dedicated iLO port

Serial 1 (Rear)

Pointing Device (Mouse) 0 (via USB only)

Graphics 2 VGA ports(1 rear, 1 front)

Keyboard

USB 2.0 Ports

0 (via USB only)

7 (two front, one internal, four rear)

NOTE: In order to use internal USB port, the internal USB Cable Gen8 Kit (P/N: 662961-B21) is required.

Please note that this is a Factory installable Only (FIO) option and cannot be bought standalone.

NOTE: Front Video Graphic Adapter Kit (PN 655915-B21) is required for enabling front VGA port.

Industry Standard

Compliance

ACPI 2.0 Compliant

PCIe 3.0 Compliant

PXE Support

WOL Support

Microsoft® Logo certifications

IPMI 2.0, SMASH CLP, DCMI 1.0 compliant

USB 2.0 Support


QuickSpecs

Standard Features

Server Power Cords


One 6' Highline (IEC-IEC) power cord ships standard

NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cords that allow connection to 110V US wall outlets in a home or office. HP ProLiant DL servers are primarily connected to PDU's in data center racks and now ship standard with only a PDU 6-foot C-14 to C13 power cord (142258-001). If a user wishes to power a ProLiant DL server using a110V receptacle (NEMA-15), the

12-foot NEMA 5-15 to C13 power cord.

If customers require a local power cord, they can check the power cord matrix for the appropriate cord.

Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix .

Power Specifications

To review typical system power ratings, use the HP Power Advisor tool available at URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor .

NOTE: Power Specification and Technical Content for supported power supplies can be found at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html

Common Slot Power

Supplies

HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of

ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest power supply efficiency without degrading system performance. HP CS power supplies are tested by the

Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP

CS power supply options provide efficiency ratings of up to 94% and are available in three power output options - 460W, 750W and 1200W - allowing the customer to "right-size" a power supply for their specific server configuration. All HP Common Slot power sources are UL, CE Mark Compliant, hot-plug and support redundant configurations.

HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power Discovery (IPD) solution. IPD is the first technology to create an automated, energy-aware network between IT systems and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and downtime costs across data centers. For more information on HP's IPD solution, go to www.hp.com/go/ipd .

NOTE: It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your needs. HP Power Advisor can be accessed at: www.hp.com/go/hppoweradvisor .

NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus independently tests power supply efficiency and publicly posts the results on 80Plus.org.

NOTE: Common Slot power supplies require a new power backplane kit (p/n: 662959-B21) for installation.

The Common Slot power supply and power backplane kits must be factory installed - neither should be bought as a standalone option for HP ProLiant DL160 Gen8.

NOTE: 10GbE FlexibleLOM mandatorily need common slot power supply and are not supported with 500W multi-output power supply. These FlexibleLOM options require Aux power connector that comes with the common slot power supply. Please see the options section for specific details.

NOTE: Since DL160 Gen8 only has only one power supply slot, above mentioned power supplies will not be

Hot Plug in case of DL160 Gen8.



QuickSpecs

Standard Features


System Fans


Required Cabling

5 non-hot plug redundant fans ship standard in 1P models

7 non-hot plug redundant fans ship standard in 2P models

NOTE: The processor option kit contains two additional fan modules when upgrading from one processor to two processor models.

For required cabling information, refer to the Web site at: www.hp.com/servers/dl160 Gen8

Operating Systems and

Virtualization Software

Support for ProLiant

Servers

Microsoft Windows Server

Oracle Solaris

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

VMware

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization

Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page http://www.hp.com/support/DL160cGen8 .

Graphics

Integrated Matrox G200 video standard

1280 x 1024 (32 bpp)

1920 x 1200 (16 bpp)

Form Factor


Rack (1U), (1.75 in/4.45 cm)

8 SFF Models

1.7" (43.2mm) Height x 17.1" (434.6mm) Width x 27.5" (699mm) Length

4 LFF Models

1.7" (43.18mm) Height x 17.11" (434.6mm) Width x 29.5" (750mm) Length


QuickSpecs

Standard Features

On System Management HP iLO Management

Engine


HP iLO Management Engine is a complete set of embedded management features supporting the complete lifecycle of the server, from initial deployment, through ongoing management, to service alerting and remote support. HP iLO Management Engine comes standard on all HP ProLiant Gen8

Servers. HP iLO Management Engine portfolio includes:

HP iLO: The HP iLO management processor is the core foundation for

HP iLO Management Engine. HP iLO for HP ProLiant servers simplify server setup, engage health monitoring and power and thermal control, and promote remote administration for HP ProLiant ML, DL, BL and SL servers. Furthermore with the new HP iLO is the ability to access, deploy, and manage your server anytime from anywhere with your

Smartphone device.

HP Agentless Management: With HP iLO Management Engine in every

HP ProLiant Gen8 server, the base hardware monitoring and alerting capability is built into the system (running on the HP iLO chipset) and starts working the moment that a power cord and an Ethernet cable is connected to the server.

HP Active Health System: HP Active Health System is an essential component of the HP iLO Management Engine. It provides: Diagnostics tools/scanners wrapped into one; Always on, continuous monitoring for increased stability and shorter downtimes; Rich configuration history;

Health and service alerts; Easy export and upload to Service and

Support.

HP Active Health System: HP Active Health System is an essential component of the HP iLO Management Engine. It provides customers with: Diagnostics tools/scanners wrapped into one; Always on, continuous monitoring for increased stability and shorter downtimes;

Rich configuration history; Health and service alerts; Easy export and upload to Service and Support.

HP Intelligent Provisioning: (previously known as SmartStart): HP

Intelligent Provisioning offers the ability for out-of-the box singleserver deployment and configuration without the need for media.

NOTE: For more information, visit: http://www.hp.com/go/ilo


QuickSpecs

Standard Features

HP Insight management software

HP Service Pack for

ProLiant (SPP)

Security


Power-on password

Setup password

Diskette boot control

Secure Sockets Layer (SSL)

Secure Shell (SSH)

HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) version 5 provide a new, comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime. The SPP will be updated at a predictable cadence, typically coinciding with new HP server hardware launches. By enabling all firmware to be updated online and integrating firmware and system software updates in one operation HP SUM and the SPP offer faster updates of individual servers and dramatically faster updates of entire BladeSystem enclosures. Further improving system uptime and stability is the fact that HP provides 12 months of support on each Service Pack for ProLiant.

The user experience around HP SUM and the SPP has been improved in several ways, starting with the web download. A single web page provides access to a single download containing both the latest version of HP SUM version 5 and the latest SPP. Optional smaller subsets with only specific types of servers or specific operating systems are offered to save on download time. The HP SUM application has been re-written to provide a more straightforward, intuitive user interface that guides the user through the steps of discovery, analyses and update, providing comprehensive information on available updates, criticality and interdependencies. This information is also available in reports.

By providing the option of multiple local or shared repositories which can be easily updated from hp.com, HP SUM provides the tools to optimize stability and consistency throughout the company. While HP SUM and the SPP will recommend the combinations of firmware and system software that HP has found to be the best practice, the application gives customers the flexibility to set their own specific baseline.

The Service Pack for ProLiant has been rigorously tested with specific attention for interaction between firmware, drivers and agents both within the server as well as in interaction with the BladeSystem enclosure components

(Onboard Administrator and Virtual Connect). This testing ensures the highest quality as well as providing the input for HP SUM to deploy updates taking into account all interdepencies, when determining the correct updates and order of update deployment.

NOTE: The Service Pack for ProLiant (which includes HP SUM 5) can be downloaded from www.hp.com/go/spp/download . More information can be found: www.hp.com/go/spp and http://www.hp.com/go/hpsum


QuickSpecs

Standard Features

Warranty


This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and parts replacement is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support (3-1-1 warranty in APJ). Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

.


QuickSpecs

Optional Features


HP Insight management software

HP Insight Control

HP Matrix Operating

Environment

HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.

Two versions of Insight Control are available, to serve environments requiring either a Linux-based or a Windows-based central management server: HP

Insight Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol .

HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight .

The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers is an integrated command center that helps you instantly adjust to dynamic business demands. This advanced infrastructure management software lets you reduce the cost of common data center tasks by up to 40 percent while keeping pace with your changing business.

HP iLO Advanced License for ProLiant Servers

The HP Matrix OE includes the automated provisioning, optimization, and recovery management capabilities for HP CloudSystem Matrix, the ideal platform for private cloud and Infrastructure as a Service (IaaS).

NOTE: For more information, visit: http://www.hp.com/go/matrixoe

HP iLO management processors for HP ProLiant Gen8 servers virtualizes system controls to help simplify server setup, engage health monitoring and power and thermal control, and promote remote administration. HP iLO functions out-of-the-box without additional software installation and functions regardless of the servers' state of operation. Basic system board management functions, diagnostics, and essential Lights-Out functionality ships standard across all HP ProLiant Gen8 rack, tower and blade servers. The

HP iLO can be accessed from any location via a web browser and works handin-hand with HP Systems Insight Manager, Insight Control, and HP Matrix

Operating Environment, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service to the business.

Advanced functionality, such as graphical remote console, multi-user collaboration, and video record/playback can be activated with the optional

HP iLO Advanced or HP iLO Advanced for BladeSystem licenses. The Advanced licensed features offer sophisticated remote administration of servers in dynamic data center and remote locations and can help significantly reduce cost associated with IT-related travel and unplanned downtime.

NOTE: For more information, visit: http://www.hp.com/go/ilo


QuickSpecs

Optional Features

High Performance

Clusters


HP Cluster Platforms

HP HPC Interconnects

HP Insight Cluster

Management Utility

HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux

Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster

Platform Configurator simplifies ordering. http://www.hp.com/go/clusters

High Performance Computing (HPC) interconnect technologies are available for this server as part of the HP Cluster Platform portfolio. These high-speed

InfiniBand and Gigabit interconnects are fully supported by HP when integrated within an HP cluster. Flexible, validated solutions can be defined with the help of configuration tools.

http://www.hp.com/techservers/clusters/ucp/index.html

HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale clusters of Linux ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective.

http://www.hp.com/go/cmu

HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported option to HP Insight CMU, for the development and deployment of applications on HPC Cluster Platforms. Value Pack includes the Platform LSF workload scheduler and Platform Application Center, as well as the HP-MPI parallelization library. HP HPC Linux Value Pack

HP Insight Online

HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP support information personalized to your IT environment. Insight Online can automatically display devices remotely monitored by HP Insight Remote Support. With Insight Online's easy navigation you can efficiently track your IT support contracts and device status from anywhere and at anytime.

www.hp.com/go/insightonline

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express .


QuickSpecs

Optional Features

HP Enterprise

Configurator


The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business

Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator .


QuickSpecs

Service and Support

Service and Support


HP Technology Services for Industry Standard Servers and BladeSystem

Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.

What HP ProLiant and BladeSystem Services can do for you

HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage

IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift of base warranty. Foundation Care services portfolio consists of scalable, reactive support services for HP industry-standard servers and software. New to this portfolio is HP Collaborative Support. If you are running business critical environments, HP offers Proactive Care. These services help deliver high levels of application availability through proactive service management and advanced technical response.

You can get the support you need by choosing from one of a number of service packaged solutions we have designed to address wider set of customer support needs.

HP Technology Services meets business challenges with services offered in three support recommendations - Optimized Care, Standard Care, and Basic Care - available for each product group.

Such support solutions enable customers to optimize technology operations, minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support recommendations for servers, storage, networking and software.

All three service recommendations include support services from the broader portfolio of Foundation Care and Proactive Care services.

Optimized Care Package Supports maintaining servers at optimum performance availability

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

3-Year HP 24x7 4 hour Response, Proactive Care

Helps optimize your systems and delivers high levels of application availability through proactive service management and advanced technical response. A skilled Technical Manager will own your query or issue end to end until resolved, delivering a single point of contact for you.

Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat)) Installation and Start Up and Software

Support plus Microsoft or Linux education courses +30 Proactive Select Credits, Factory Express.


QuickSpecs


Service and Support

Standard Care Package Support recommendation that maintains high level of server availability


Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

3-Year HP 24x7 4 hour Response, Collaborative Support

Provides problem resolution support across the stack of HW, firmware, and HP and 3rd party SW. In case the issue is with 3rd party SW, HP does known issue resolution. If HP cannot solve the issue, it will contact the third-party vendor and create a problem incident on your behalf.

http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-8232ENW.pdf

Additional Services: Software support service with 24X7 availability with a 2 hour response, Training courses on Microsoft, Linux (Red Hat and SUSE), VMware, and HP Insight Software, +60 Proactive Select

Credits, Factory Express.

http://www8.hp.com/us/en/business-services/it-ervices.html?compURI=1078865

Basic Care Package Delivers minimum recommended support service level


Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service

Provides you with rapid remote support and if required an HP authorized representative who will arrive on site any time and day of the year to begin hardware maintenance service within 4 hours of the service request being logged http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf

Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat)) Installation and Start Up and Software

Support, Factory Express.

Insight Remote Support

Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more http://www.hp.com/go/insightremotesupport

HP Support Center

Personalized online support portal with access to information, tools and experts to support HP business products. Submit support cases online, chat with HP experts, access support resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc

HP's Support Center Mobile App * allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime.

HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,

HP Care Pack or HP contractual support agreement.

*HP' Support Center Mobile App is subject to local availability.


QuickSpecs


Service and Support

Warranty / Service

Coverage

For ProLiant servers and storage systems, the services cover HP-branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to 22" and tower UPS products; these items will be covered at the same service level and for the same coverage period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.

For more information

To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant


QuickSpecs

Pre-configured Models


NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory

Integrated Models" section.

NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.

NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately.

NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this

QuickSpecs.

NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.

Entry Model


E5-2603 1P 4GB-R SATA 4

LFF 500W PS Entry Server

662082-xx1

Processor(s)

Cache Memory

Memory



Hard Drive

Internal Storage

Optical Drive

Power Supply

Fans

Management

Form Factor

Warranty

(1) Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)

10MB (1 x 10MB) L3 cache

4GB (1 x 4GB DDR3-1333MHz RDIMMs)

NOTE: Total of 24 DIMM slots



None ship standard

Up to 4 large form factor drives

(1) (Optional: DVD-ROM, DVD-RW)

500W Platinum FIO Power Supply with Backplane (ships standard)

(5) Non hot plug redundant fans

HP iLO Management Engine (standard)

Optional: HP Insight Control

1U

NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which does not allow for in rack serviceability. The HP 1U Gen8 Cable Management

Arm is not available when using Friction Rails. Caution: HP recommends that a minimum of two people is required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation

Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,

0-Years Onsite support (3-1-1 warranty in APJ)

Base Model


E5-2620 1P 8GB-R SATA 4

LFF 500W PS Base Server

662083-xx1

Processor(s)

Cache Memory

Memory



Hard Drive

(1) Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-

1333, HT, Turbo2- 3/3/4/4/5/5) processor


8GB (2x4GB DDR3-1333MHz RDIMMs




None ship standard


QuickSpecs



Optical Drive

Power Supply

Fans

Management

Form Factor

Warranty


Up to 4 large form factor drives






1U





Energy Star- Performance Model


E5-2640 2P 16GB-R P420

Hot Plug 8 SFF 500W PS

Perf Server

662084-xx1

Processor(s)

Cache Memory

Memory



Hard Drive


Optical Drive

Power Supply

Fans

Management

Form Factor

Warranty

(2) Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-

1333, HT, Turbo2- 3/3/4/4/5/5) processor


16GB (4x 4GB DDR3-1333MHz RDIMMs)



HP Smart Array P420/ 1G FBWC controller

None ship standard

Up to 8 small form factor drives






1U






QuickSpecs


Country Code Key

xx=00 xx=29 xx=37 xx=42 xx=AA

U.S.

Japan

APD

Euro

PRC



QuickSpecs

Configuration Information - Factory Integrated Models


NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.

NOTE: FIO indicates that this option is only available as a factory installable option.

Step 1: Base Configuration (choose one of the following configurable models)

HP Models

HP ProLiant DL160 Gen8 SFF Configure-to-order Server

Factory Integrated Model ships with:

2 x HP Smart Socket Guides for fast processor installation


Drive cage: Eight small form factor

I/O Slots- Two std

(1) FH/FL x16 PCIe 3.0 or (1) FH/HL x16 PCIe3.0 and (1)low profile x8 PCIe 3.0

(1)FlexibleLOM slot for networking upgrade

(24) DIMM slots for DIMMs installation

(5) Non-hot plug redundant fans

(7) USB ports-4 rear, 2 front, 1 internal


Rack (1U), (1.75 in / 4.45 cm)

Power supply not included- Please choose from the power supply option section in Step

2 below.

HP ProLiant DL160 Gen8 LFF Configure-to-order Server




Drive cage: Four large form factor

I/O Slots- Two std








Rack (1U), (1.75 in / 4.45 cm)


2 below.

HPProLiant DL160 Gen8 Non-hot Plug LFF Configure-to-order Server




Drive cage: Four large form factor

I/O Slots- Two std





666281-B21

666282-B21

685622-B21


QuickSpecs






Rack (1U), (1.75 in / 4.45 cm)


2 below.

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

HP Processors

NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.

Eight-Core Processors

HP DL160 Gen8 Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/130W) FIO Processor Kit





HP DL160 Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W) FIO Processor Kit






HP DL160 Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W) FIO Processor Kit

Quad-Core Processors



Dual-Core Processors


NOTE: Up to 2 processors supported. Energy Star - Performance Model and Energy Star

Certified configurations include two processors with 7 Non-hot Plug Redundant fans.

Not all options are energy star qualified.

NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node,

6 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v#

(not yet designated) = version number.

662933-L21

662932-L21

662925-L21

662924-L21

662931-L21

668863-L21

662927-L21

662930-L21

662929-L21

662928-L21

662921-L21

662923-L21

662922-L21

662926-L21

HP Memory

NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for

Gen8. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html

NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM


QuickSpecs


Configuration Information - Factory Integrated Models and LRDIMM.

Registered DIMMs (RDIMMs)

HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low

Voltage Memory Kit

HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory

Kit

HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low

Voltage Memory Kit


Kit

HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit


Voltage Memory Kit

HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory

Kit

Unbuffered with ECC DIMMs (UDIMMs)

HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory

Kit

HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low

Voltage Memory Kit

HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory

Kit

HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low

Voltage Memory Kit


Kit


Voltage Memory Kit

Load Reduction DIMMs (LRDIMMs)

HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low

Voltage Memory Kit

NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration

Tool: www.hp.com/go/ddr3memory-configurator .

NOTE: Depending on the memory configuration and processor model, 1600MHz and

1333MHz memory may operate at a lower speed. Please see the see the "Memory" section later in this document and the Online Memory Configuration Tool for details at www.hp.com/go/ddr3memory-configurator .

NOTE: For additional memory rules and guidelines, see the "Memory" section later in this document.

NOTE: For more information on ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient .

NOTE: PC3L is a low voltage memory.

NOTE: Intel E5-2620 processor does not support LV DIMMs running at 1.35V. The HP

RBSU can be changed to run at 1.5V.

NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds. Memory

647893-B21

647895-B21

647897-B21

647899-B21

690802-B21

647901-B21

672631-B21

669320-B21

647905-B21

669322-B21

647907-B21

669324-B21

647909-B21

647903-B21


QuickSpecs

Configuration Information - Factory Integrated Models speed is a function of the processor QPI speed.

HP Power Supplies


NOTE: Prior to making a power supply selection it is highly recommended that the HP

Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor .

NOTE: HP ProLiant DL160 Gen8 has only one power supply slot, above mentioned power supplies will not be Hot Plug for DL160 Gen8.

HP 500W Platinum Factory Integrated Power Supply Kit with Backplane

NOTE: Since this power supply is not common slot it does not allow iPDU to obtain HP

Location Discovery Services information. iLO Advanced Pack is required for Discovery

Services in DL160 Gen8.

HP Common Slot Platinum Plus Power Supply Kits

NOTE: The following Power Supplies offer 94% Efficiency with support for Intelligent

Power Discovery.

NOTE: Common slot power supplies need an enablement kit(P/N: 662959-B21) in

DL160 Gen8.

HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit

NOTE: Requires Power Backplane kit (p/n: 662959-B21).



HP Common Slot -48VDC Power Supplies

HP 750W Common Slot -48VDC Hot Plug Power Supply Kit


NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a power cable. It has been designed with a terminal block connection allowing for custom design of power cords by the user.

NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC cable.


Enablement Kit

HP DL160 Gen8 FIO Power Backplane Kit

NOTE: When configuring the HP ProLiant DL160 Gen8 with a Common Slot power supply, the HP Power Backplane DL160 Gen8 FIO Kit (PN 662959-B21) must be used for proper installation. The Common Slot power supply and power backplane kit for the

DL160 Gen8 must be factory installed and cannot be purchased as separate options.

NOTE: Common Slot power supply is mandatory with 10Gigabit FlexibleLOM.


656365-B21

656362-B21

656363-B21

636673-B21

662959-B21


QuickSpecs



HP Storage Controllers SAS Controllers

NOTE: One Smart Array Controller is only required when purchasing Hot Plug SFF CTO

Chassis Model (P/N 666281-B21) in Step 1.

NOTE: HP Dynamic Smart Array B120i controller supports up to 3Gb/s speed in HP

ProLiant DL160 Gen8. HP Smart Array controller is required in PCIe slot to achieve

6Gb/s.

NOTE: The below storage controllers are intended for use with internal drives in the Hot

Plug CTO Chassis Model (P/N 666281-B21).

NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO Chassis, a

HP Smart Array P420 controller must be selected.

NOTE: HP Smart Array P420 controller can only be installed in the internal PCIe slot. It is not supported on external PCIe slot.

NOTE: When using FL/FH graphic card, there is no space for any storage controller in

DL160 Gen8.

HP Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller


631670-B21

631671-B21

Step 3: Choose Additional Factory Integratable Options

HP Insight Software

HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server

FIO License

HP Insight Control for Linux including 1yr 24x7 Support ML/DL Bundle 1 Server FIO

License

HP Optical Drives

HP 9.5mm SATA DVD ROM JackBlack Optical Drive


HP USB and SD Options

HP Gen8 FIO Internal USB Kit

NOTE: Required to enable the internal USB port.

HP Rack Options

HP 1U Friction Gen8 FIO Rail Kit

NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which does not allow for in rack serviceability. The HP 1U Gen8 Cable Management Arm is not available when using Friction Rails. Caution: HP recommends that a minimum of two people is required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.

NOTE: Additional Rack Options can be found in the "Additional Options" section of this

QuickSpecs.

Step 4: Choose Additional Options for Factory Integration

NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" section below.

582765-B21

TC203A

652238-B21

652238-B21

662961-B21

663200-B21


QuickSpecs

Core Options


NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

HP Unique Options

662965-B21 HP DL160 Gen8 VGA Power Cable Kit

NOTE: Required with NVIDIA Quadro 4000 graphic card.

HP DL360 Gen8 Front Video Adapter Kit

NOTE: Required to enable the front video port.

655915-B21

HP Processors

HP Memory

Eight-Core Processors

HP DL160 Gen8 Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/130W) Processor Kit





HP DL160 Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W) Processor Kit






HP DL160 Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W) Processor Kit

Quad-Core Processors



Dual-Core Processors


NOTE: Up to 2 processors supported. Energy Star - High Performance Model and Energy

Star Certified configurations include two processors with 7 non- Hot Plug Redundant fans.

NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node,

6 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v#

(not yet designated) = version number.

662933-B21

662932-B21

662925-B21

662924-B21

662931-B21

668863-B21

662927-B21

662930-B21

662929-B21

662928-B21

662921-B21

662923-B21

662922-B21

662926-B21

NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for


.




QuickSpecs

Core Options



Voltage Memory Kit


Kit


Voltage Memory Kit


Kit



Voltage Memory Kit


Kit



Kit


Voltage Memory Kit


Kit


Voltage Memory Kit


Kit


Voltage Memory Kit



Voltage Memory Kit




1333MHz memory may operate at a lower speed. Please see the see the "Memory" section later in this document and the Online Memory Configuration Tool for details at: www.hp.com/go/ddr3memory-configurator .






NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds. Memory speed is a function of the processor QPI speed.

647893-B21

647895-B21

647897-B21

647899-B21

690802-B21

647901-B21

672631-B21

669320-B21

647905-B21

669322-B21

647907-B21

669324-B21

647909-B21

647903-B21


QuickSpecs

Core Options

HP Optical Drives


HP 9.5mm SATA DVD RW JackBlack Optical Drive

HP Hard Drives


NOTE: HP ProLiant Gen8 Smart Storage solutions are equipped with entirely redesigned Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for "Do Not Remove".

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives

HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive






SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives

HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives

HP 600GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive

HP 450GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive

SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives

HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive











HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html

652238-B21

652241-B21

652589-B21

652583-B21

652572-B21

652564-B21

652611-B21

652605-B21

652749-B21

652745-B21

652620-B21

652615-B21

652766-B21

652757-B21

652753-B21

652589-B21

652583-B21

652572-B21

652564-B21

652611-B21

652605-B21

652749-B21

652745-B21


QuickSpecs

Core Options


6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives

HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives

HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive



HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html

(Worldwide)

6G SAS MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives

HP 800GB 6G SAS MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr Warranty Solid State

Drive


Drive


Drive

6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives

HP 200GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr Warranty Solid

State Drive

HP 400GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr Warranty Solid

State Drive

3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives

HP 400GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr Warranty Solid

State Drive


State Drive


State Drive

3G SATA MLC Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives

HP 400GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr Warranty Solid

State Drive


State Drive


State Drive

6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive



HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard

Drive

655708-B21

655710-B21

628061-B21

658079-B21

657750-B21

658071-B21

653109-B21

653105-B21

658478-B21

653078-B21

653082-B21

653120-B21

653118-B21

653112-B21

653126-B21

653124-B21

653122-B21

628065-B21

659339-B21

659337-B21

659341-B21


QuickSpecs

Core Options


SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr

Warranty Hard Drive

HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr

Warranty Hard Drive


(Worldwide)

Hard Drive Kits

HP SFF Gen8 Hard Drive Blank Kit

HP LFF Gen8 Hard Drive Blank Kit

516830-B21

516826-B21

666987-B21

666986-B21

HP Networking Gigabit Ethernet Adapters

HP NC112T PCI Express Gigabit Server Adapter

HP Ethernet 1Gb 4-port 331T Adapter



HP NC365T 4-port Ethernet Server Adapter

10 Gigabit Ethernet Adapters

NOTE: No more than two10GbE I/O devices are supported in a single ProLiant server.

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.

NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.

HP NC523SFP 10Gb 2-port Server Adapter

HP NC552SFP 10Gb 2-port Ethernet Server Adapter

FlexibleLOM Adapters

HP Ethernet 1Gb 4-port 331FLR Adapter

HP Ethernet 10Gb 2-port 530SFP Adapter

HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter

HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter

HP Ethernet 10Gb 2-port 560SFP+ Adapter

NOTE: HP ProLiant DL160 Gen8 has a dedicated slot for FlexibleLOM. PCIe slots need not be consumed for installing FlexibleLOM.

NOTE: Please note that common slot power supply is mandatorily required with 10Gb

FlexibleLOM. Common slot power supplies are factory installable only and cannot be bought as standalone option kit in HP ProLiant DL160 Gen8.

NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs .

503746-B21

647594-B21

615732-B21

652497-B21

593722-B21

593717-B21

614203-B21

629135-B21

652503-B21

647581-B21

629142-B21

665249-B21


QuickSpecs

Core Options

HP InfiniBand


HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA

HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter

HP InfiniBand FDR/EN 10/40Gb Dual Port 544FLR-QSFP Adapter

HP InfiniBand QDR/EN 10Gb Dual Port 544FLR-QSFP Adapter

QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA

NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html

592520-B21

649281-B21

649282-B21

649283-B21

583211-B21

HP Power Supplies

HP Graphics Options

NOTE: Prior to making a power supply selection it is highly recommended that the HP

Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor .

NOTE: Field upgrade is possible only from 460W Common Slot Power Supply to either of the below mentioned Common Slot Power Supplies. The 500W multi output power supplies are not field upgradable.

HP Common Slot Platinum Plus Power Supply Kits

NOTE: The following AC Power Supplies offer 94% Efficiency with support for

Intelligent Power Discovery.


HP Common Slot -48VDC Power Supplies

NOTE: The following Power Supplies offer 92% Efficiency

HP 750W Common Slot -48VDC Hot Plug Power Supply Kit

NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a power cable. It has been designed with a terminal block connection allowing for custom design of power cords by the user.

NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC cable.


656363-B21

636673-B21

HP DL160 Gen8 VGA Power Cable Kit

NOTE: Required with NVIDIA Quadro 4000 graphic card.

HP DL360 Gen8 Front Video Adapter Kit


NVIDIA Quadro 4000 2GB PCI-E Adapter

NOTE: Quadro 4000 is FL/FH graphic card and consumes both internal and external PCIe slots. It is only supported on LFF models since SFF models need HP Smart Array P420 controller in the internal slot.

662965-B21

655915-B21

655933-B21


QuickSpecs

Additional Options


NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

HP Insight software HP Insight Control

HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License T9074BAE

452148-B22 HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server

License

HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Electronic

License

HP Insight Management Media Kit

NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP

Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and

Virtual Connect Enterprise Manager software. Uses an integrated installer to perform quick and accurate software installation and updates.

HP Insight Control for Linux

TC278AAE

436222-B21

TC213AAE HP Insight Control for Linux including 1yr 24x7 Support Electronic License

NOTE: This part number can be purchased as a single license or as multiple licenses with a single activation key. Customer will receive a license entitlement certificate via email. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical

Support and Update Service.

NOTE: Electronic LTUs are only available through limited points of sales; if not available, order a printed license entitlement certificate instead.

HP Insight Control for Linux including 1yr 24x7 Support Single Server License

HP Insight Control for Linux w/1yr 24x7 Supp ML/DL/SL Bundle Electronic 1 Svr LTU

HP Insight Control for Linux Media Kit

NOTE: This optional Media pack DVD contains the ISO image for HP Insight Control for

Linux, HP Systems Insight Manager, HP Insight Control power management, HP Insight

Control virtual machine management, and an integrated installer. Servers must be acquired separately.

NOTE: This Media pack is optional because the latest ISO image and latest updates may be downloaded at no cost from: http://www.hp.com/go/ic-linux (click on Download button).

NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.

NOTE: For additional License Kits, including electronic licensing options, please see the

QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html

HP Insight Control server deployment

HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License

HP Insight Control Server Deployment including 1yr 24x7 Support Single Server License

NOTE: This license allows 1 server to be deployed. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s).

Includes one year of 24 x 7 HP Software Technical Support Service.

TC209A

TC203AAE

TC208A

T9082AAE

452151-B21


QuickSpecs

Additional Options


NOTE: For additional license kits including electronic delivery options, please see the

Insight Rapid Deployment software QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html

HP iLO Advanced License HP iLO Advanced Pack Electronic License with 3yr 24x7 Tech Support and Updates

HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates

HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single Server

License

NOTE: For more information, visit: http://www.hp.com/go/ilo .

BD506AAE

BD505A

512485-B21

HP High Performance

Clusters

HP Cluster Management Utility

HP Insight Cluster Management Utility 1yr 24x7 Flexible License

NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.

HP Insight Cluster Management Utility 3yr 24x7 Flexible License

NOTE: These part numbers can be used to purchase one certificate for multiple licenses and support with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. Customer also will receive a support agreement.

HP Insight Cluster Management Utility Media

NOTE: Order a minimum of one license per cluster to purchase media including software and documentation, which will be delivered to the customer, and also licenses

CMU management. No license key is delivered or required

NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html

HP HPC Linux Value Pack

HP High Performance Computing Linux Value Pack 1 Processor Flexible License

NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one socket (a.k.a. processor). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key.

HP High Performance Computing Linux Value Pack Media Kit

NOTE: This part number can be used to purchase media including software and documentation, which will be delivered to the customer.

NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html

QL803B

BD476A

BD477A

TC293B

TC294A


QuickSpecs

Additional Options

HP I/O Accelerator

Options


HP 160GB Single Level Cell PCIe ioDrive for ProLiant Servers

NOTE: A low-profile PCI bracket is included for use in low-profile slots.

HP 320GB Multi Level Cell PCIe ioDrive for ProLiant Servers

NOTE: A low-profile PCI bracket is included for use in low-profile slots.

HP 320GB Single Level Cell PCIe ioDrive Duo for ProLiant Servers

HP 640GB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers

HP 1.28TB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers

NOTE: When the Full length Graphic card is installed in the system, no additional PCIe slots is available and only embedded storage controller B120i is available for up to 4

SATA HDDs configuration


(Worldwide)

600278-B21

600279-B21

600281-B21

600282-B21

641027-B21

HP Graphics Options

HP Security

HP DL160 Gen8 VGA Power Cable Kit

NOTE: Required with NVIDIA Quadro 4000 graphic card .

HP DL360Gen8 Front Video Adapter Kit


NVIDIA Quadro 4000 2GB PCI-E Adapter

NOTE: Quadro 4000 is FL/FH graphic card and consumes both internal and external PCIe slots. It is only supported on LFF models since SFF models need HP Smart Array P420 controller in the internal slot.

HP Trusted Platform Module Option

NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption

(BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline. For more information about TPM, including a white paper, go to: www.hp.com/go/TPM .

NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.

NOTE: The TPM key is unique to every TPM deployed server and must be retained.

Misplacing or losing the key could result in data loss.

HP 1U Security Gen8 Bezel Kit

HP Storage Controllers

NOTE: To use the internal only PCI-e slot when purchasing the Hot Plug CTO Chassis (PN

666282-B21), a HP Smart Array P420 controller must be selected.

SAS Controllers

Smart Array P222 Controller

DA - 14282 Worldwide — Version 9 — August 13, 2012

662965-B21

655915-B21

655933-B21

488069-B21

664918-B21

Page 33

QuickSpecs

Additional Options


HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller

NOTE: Mini SAS 700mm cable (PN 662963-B21) required with this controller.

NOTE: HP Smart Array P222 controller can only be installed in the external PCI-e slot.

NOTE: HP Smart Array P222 controller is supported on LFF models only.

HP Smart Array P420 Controller



NOTE: HP Smart Array P420 controller can only be installed in the internal PCI-e slot. It is not supported on external PCI-e slot.

NOTE: HP Smart Array P420 controller is required for SFF models.


HP Smart Array P421/2GB FBWC 6Gb 2-ports Ext SAS Controller

HP Smart Array P421/1GB FBWC 6Gb 2-ports Ext SAS Controller


HP Smart Array P822/2GB FBWC 2-ports Int/4-ports Ext SAS Controller

Optional upgrades

HP 2GB P-series Smart Array Flash Backed Write Cache

HP 1GB P-series Smart Array Flash Backed Write Cache

HP 512MB B-series 36 inch Dynamic Smart Array Flash Backed Write Cache for ML/DL

NOTE: This upgrade is for HP Dynamic Smart Array B120i controller. It is required for implementing RAID 5.

HP Mini SAS 800mm Gen8 Cable Kit

NOTE: This cable option kit is required with HP Smart Array P822/ 2GB FBWC controller.

HP Mini SAS 700mm Gen8 Cable Kit

NOTE: This cable option kit is required with HP Smart Array P222/512 FBWC controller.


(Smart Array P222 Controller) http://h18000.www1.hp.com/products/quickspecs/14228_div/14228_div.html



(Smart Array P822 Controller)

HP Smart Array Advanced Pack

HP Smart Array Advanced Pack 2.0 No Media 1 Server 1yr 24x7 Support Software

HP Smart Array Advanced Pack 2.0 No Media Electronic Lic 1yr 24x7 Support Software http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html

(SAAP)

Host Bus Adapter

HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter

NOTE: Supports SCSI Tapes only, no RAID support.

NOTE: HBA is recommended for SCSI tape drive support.

631667-B21

631671-B21

631670-B21

631674-B21

631673-B21

615418-B21

631681-B21

631679-B21

631922-B21

676895-B21

662963-B21

BC377A

BC390AAE

412911-B21


QuickSpecs

Additional Options


HP H220 Host Bus Adapter


NOTE: This is a 2 x4 External Port HBA.

NOTE: This is only approved for the HP P2000 G3 SAS Modular Smart and tape drives.



(SC11Xe HBA) http://h18004.www1.hp.com/products/quickspecs/14336_div/14336_div.html

(HBA 220) http://h18004.www1.hp.com/products/quickspecs/14222_div/14222_div.html

(HBA 221) http://h18004.www1.hp.com/products/quickspecs/14337_div/14337_div.html

(HBA 222)

650933-B21

650931-B21

650926-B21

HP Backup & Recovery

Software

Data Protector Express

HP Data Protector Express V6.0 for 1 Server E-LTU



HP Basic Upgrade to Data Protector Express V6 for 1 Server E-LTU

NOTE: Only one of these Data Protector Express base products is required. To see available options: http://www.hp.com/go/dataprotectorexpress

HP Tape Backup

NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK

NOTE: Connection using the HP P222 SAS Smart Array Controller (631667-B21) recommended.

Tape Drives

HP DAT 160 SAS Internal Tape Drive

NOTE: For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount Kit

(AG576B). No peripheral bay available for installation into the server.

HP Ultrium 448 SAS Internal Drive

NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).

HP Ultrium 920 SAS Internal Tape Drive

NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).

Tape Autoloader

HP 1/8 G2 Ultrium 920 SAS Autoloader

NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation.

Tape Library

HP MSL2024 Ultrium 920 SAS Tape Library

HP MSL2024 1 LTO-5 Ultrium 3000 SAS Tape Library

TC330BAE

TC331BAE

TC332BAE

TC333BAE

Q1587B

DW085B

EH847B

AH558A

AH559A

BL537A


QuickSpecs

Additional Options


HP Disk Backup

HP Storage Options

NOTE: For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d . For the complete range of RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP disk backup products see: http://www.hp.com/storage/SPOCK

HP D2D Backup Systems with Backup Data Deduplication

HP D2D2502i Backup System

NOTE: 1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

HP D2D2504i Backup System

NOTE: 3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

HP RDX Removable Disk Backup Systems USB

HP RDX320 Internal Removable Disk Backup System

NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 320GB of disk capacity per data cartridge.

HP RDX500 Internal Removable Disk Backup System

NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 500GB of disk capacity per data cartridge.

Fibre Channel HBA

NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and

Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html

Brocade Fibre Channel HBAs

HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter

HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter

Emulex Fibre Channel HBAs

HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter

HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter

QLogic Fibre Channel HBAs

HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter

HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter

Converged Network Adapter

HP CN1100E Dual Port Converged Network Adapter

EJ001C

EJ002C

AJ767A

AJ934A

AP769A

AP770A

AJ762B

AJ763B

AK344A

AJ764A

BK835A


QuickSpecs


Additional Options

HP Disk Storage Systems HP Disk Enclosures

HP D2600 Disk Enclosure

HP D2700 Disk Enclosure

NOTE: Please see the QuickSpecs for additional options and configuration information at: http://h18000.www1.hp.com/products/quickspecs/13404_div/13404_div.html

AJ940A

AJ941A

HP Uninterruptible Power

Systems

HP Rack-mountable UPS

HP R1500 G3 Uninterruptible Power Supply (UPS)

HP R1.5kVA G3 1U INTL Uninterruptible Power System

HP R1.5kVA G3 1U JP/TW Uninterruptible Power System

HP R1.5kVA G3 1U NA Uninterruptible Power System


(Worldwide)

HP R/T3000 G2 Uninterruptible Power System (UPS)

HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System

HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System

HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System


(Worldwide)

HP R5KVA and R7KVA 3U Extended Runtime Module

R5000 Uninterruptible Power System (UPS)

HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System

HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System


(Worldwide)

R7000 Uninterruptible Power System (UPS)

HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System

HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System


(Worldwide)

NOTE: For additional information on HP Uninterruptable Power Systems please go to: www.hp.com/servers/rackups .

NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com

AF471A

AF470A

AF469A

AF468A

AF466A

AF467A

AF464A

AF461A

AF460A

AF462A

AF463A


QuickSpecs

Additional Options


NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and

Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.

Please see the following link: www.hp.com/products/powercords .

HP Power Distribution

Units

HP Monitored Power Distribution Unit: Full Rack Version

HP 17.3kVA 24A Dual Three Phase NA/JP Monitored Power Distribution Unit

HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution Unit

HP 16.6kVA 40A Dual Input Single Phase NA/JP Monitored Power Distribution Unit

HP 8.3kVA 40A Single Input Single Phase NA/JP Monitored Power Distribution Unit

HP 22.1kVA 16A Dual Input Three Phase INTL Monitored Power Distribution Unit

HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution Unit

HP 14.7kVA 32A Dual Input Single Phase INTL Monitored Power Distribution Unit

HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit

HP Monitored Power Distribution Unit: Half Rack Version

HP 4.9kVA 24A Single Input Single Phase NA/JP Monitored Power Distribution Unit

HP 7.3kVA 32A Single Input Three Phase INTL Intelligent Modular Power Distribution

Unit

HP 17.3kVA 48A Single Input Three Phase NA/JP Monitored Power Distribution Unit

HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution Unit

HP 22kVA 32A Single Input Three Phase INTL Monitored Power Distribution Unit


Modular PDUs 1U/0U

NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 G2 and

9000 series racks).

HP 2.8kVA 24A Low Voltage NA/JP Modular Power Distribution Unit

HP 3.6kVA 16A High Voltage INTL Modular Power Distribution Unit

HP 4.9kVA 24A High Voltage NA/JP Modular Power Distribution Unit


HP 8.3kVA 40A High Voltage NA/JP Modular Power Distribution Unit

HP 8.3kVA 40A High Voltage NA/JP Core Modular Power Distribution Unit

HP 4.9kVA 24A High Voltage NA/JP Core Modular Power Distribution Unit



HP 9.2kVA 40A High Voltage INTL Core Modular Power Distribution Unit

HP 7.3kVA 32A High Voltage INTL Core Modular Power Distribution Unit

HP 22kVA 32A Three Phase INTL Core Modular Power Distribution Unit

NOTE: For additional information on HP Power Distribution Units including accessories please go to: www.hp.com/go/pdu .

AF503A

AF504A

AF505A

AF506A

AF507A

AF508A

AF509A

AF510A

AF914A

AF536A

AF916A

AF915A

AF917A

252663-D71

252663-B24

252663-D72

252663-B21

252663-D73

252663-D75

252663-D74

252663-B31

252663-B32

252663-B34

252663-B33

AF518A


QuickSpecs

Additional Options


NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and

Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.

Please see the following link: www.hp.com/products/powercords .

NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific power requirements.

NOTE: Please see the following QuickSpecs for additional options including shorter jumper cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html

(Worldwide)

HP Intelligent Power

Distribution Units (iPDU)

iPDU Core Units

HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit

HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit

HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit

HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit

HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit

HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power Distribution Unit

HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power Distribution Unit

HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power Distribution Unit

HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit

HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit

HP 22kVA 32A Three Phase INTL Core Intelligent Modular Power Distribution Unit

HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution

Unit

HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution

Unit

HP 22kVA 32A 400V Three Phase 12 Outlet Core INTL Intelligent Power Distribution Unit

iPDU Kits with Standard Extension Bars

HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit

HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit

HP 7.3kVA 32A Single Phase INTL Intelligent Modular Power Distribution Kit

iPDU Extension Bars

HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar

AF520A

AF521A

AF522A

AF533A

AF523A

AF900A

AF902A

AF901A

AF525A

AF526A

AF527A

AF535A

AF537A

AF538A

AF531A

AF532A

AF534A

AF528A


QuickSpecs

Additional Options

HP Rack Series


Rack Intelligent Series rack

HP 642 1075mm Pallet Intelligent Series Rack

HP 642 1075mm Shock Intelligent Series Rack

NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed.

NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html

(Worldwide)

NOTE: For additional information regarding Rack Cabinets and Telco Rack support, please see the following URL: http://www.hp.com/go/rackandpower .

NOTE: The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow

5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE: Quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.

NOTE: High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack (single) -

PN: 327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack (6-pack) - PN:

327281-B22) are required to support the HP ProLiant DL160 in 7000 series racks. Cable

Management Arm is not supported on 7000 series racks.

NOTE: Cable management arm must be removed to access power supplies when the cable management arm is mounted on the right.

BW903A

BW904A

HP Rack Options HP USB Keyboard and Mouse

HP USB BFR with PVC Free US Keyboard/Mouse Kit

HP USB BFR with PVC Free UK Keyboard/Mouse Kit

HP USB BFR with PVC Free FR Keyboard/Mouse Kit

HP USB BFR with PVC Free ES Keyboard/Mouse Kit

HP USB BFR with PVC Free DE Keyboard/Mouse Kit

HP USB BFR with PVC Free JP Keyboard/Mouse Kit

HP USB BFR with PVC Free IT Keyboard/Mouse Kit

HP USB BFR with PVC Free CN Keyboard/Mouse Kit

HP USB BFR with PVC Free AE Keyboard/Mouse Kit

631341-B21

631344-B21

631346-B21

631348-B21

631358-B21

631360-B21

631362-B21

631364-B21

638212-B21


QuickSpecs

Additional Options


HP USB BFR with PVC Free RU Keyboard/Mouse Kit

HP USB BFR with PVC Free IN Keyboard/Mouse Kit

HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit

HP USB BFR with PVC Free Intl Keyboard/Mouse Kit

HP USB BFR with PVC Free PT Keyboard/Mouse Kit

HP USB BFR with PVC Free TR Keyboard/Mouse Kit

HP USB BFR with PVC Free CZ Keyboard/Mouse Kit

HP USB BFR with PVC Free FI Keyboard/Mouse Kit

HP USB BFR with PVC Free SE Keyboard/Mouse Kit

HP USB BFR with PVC Free CH Keyboard/Mouse Kit

HP USB BFR with PVC Free KR Keyboard/Mouse Kit


(Worldwide)

HP Server Console Switches

HP Server Console 0x2x8 Port Analog Switch

HP Server Console 0x2x16 Port Analog Switch


(Worldwide)

HP 1x4 USB/PS2 KVM Console Switch

HP 1x4 USB/PS2 KVM Console Switch


(Worldwide)

Rack Kits

HP Rack Cable Management Velcro Clips

HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit

NOTE: For SFF models.

HP 1U Gen8 Cable Management Arm

HP 1U Large Form Factor Ball Bearing Gen8 Rail Kit

NOTE: For LFF models.

NOTE: For additional information regarding Rack Cabinets and Telco Rack support, please see the following URL: www.hp.com/go/rackandpower .

AF616A

AF617A

AF611A

379820-B21

663201-B21

663203-B21

663202-B21

638214-B21

672097-D63

672097-373

672097-B33

672097-133

672097-143

672097-223

672097-353

672097-103

672097-113

672097-KD3


QuickSpecs


Additional Options

HP USB and SD Options

HP 2GB USB Flash Media Drive Key Kit

NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the

VMware virtualization environment and other HP value-add software like SmartStart.

HP recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware

ESXi. Refer to HP VMware Getting Started Guide for installation instructions.

HP 4GB Secure Digital High Capacity Flash Media Kit

NOTE: Blank SD media device is supported for use with VMware and Citrix. SD media must be installed in the internal slot of the ProLiant server. Learn more at http://www.hp.com/go/proliantvirtualization .

608447-B21

580387-B21

HP Care Pack Services

HP 3 year Next business day ProLiant DL16x Proactive Care Service

HP 3 year 4 hour 24x7 ProLiant DL16x Proactive Care Service

HP 3 year Next business day ProLiant DL16x Collaborative Support

HP 3 year 4 hour 24x7 ProLiant DL16x Collaborative Support

HP 3 year Next business day ProLiant DL14x and DL16x Hardware Support

HP 3 year 4 hour 13x5 ProLiant DL14x and DL16x Hardware Support

HP 3 year 4 hour 24x7 ProLiant DL14x and DL16x Hardware Support

HP Install ProLiant DL14x and DL16x Service

NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack

U3A12E

U3A18E

U1J92E

U1J98E

U9508E

U9509E

U9510E

U9520E


QuickSpecs

Memory


HP SmartMemory

New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true HP

Qualified Memory in your HP ProLiant Gen8 server. With HP SmartMemory your new HP ProLiant server can take advantage of additional Gen8 enhancements in performance, durability and future manageability support through HP Active Health System.

For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator


NOTE: Memory configurations listed do not apply to "Factory Integrated Models".

Standard Memory

4GB (1x4GB) , 8GB (2 x 4GB) or 16GB(4 x 4GB) depending on model, DDR3-1333MHz Registered RDIMM memory

Maximum Memory

Up to 768GB

NOTE: Charts do not represent all possible memory configurations.

DDR3 memory population guidelines

NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator

Some DIMM installation guidelines are summarized below:

For servers with twenty-four (24) memory slots:

There are four (4) channels per processor; eight (8) channels per server

There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots

White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.

Install DIMMs only if the corresponding processor is installed.

If only one processor is installed in a two processor system, only half of the DIMM slots are available.

When two processors are installed, balance the DIMMs across the two processors.

To maximize performance, balance the total memory capacity between all installed processors

Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel

Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor

Do not mix UDIMMs, RDIMMs or LRDIMMs

LR DIMMs are supported up to 3 DIMMs per channel.

DIMMs of different voltages (1.35V & 1.5V) may be mixed in any order

The system will power them at the higher voltage

DIMMs of different speed grades may be mixed in any order

The system will select a common optimal speed

To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html

(Worldwide)


QuickSpecs


Memory

DIMM

Type

DIMM slot/capacity/populated speed table

Registered DIMMS (RDIMMs)

Load

Reduced

(LRDIMMs) Unbuffered with ECC DIMMs (UDIMMs)

DIMM

Rank

DIMM

Capacity

DIMM

Native

Speed

(MHz)

Single Rank (1R)

4GB

1333

4GB

1600

8GB

1600

LV Std Std

SLOTS THAT CAN BE POPULATED

24 slot servers

24 24 24

8GB

1333

LV

24

Dual Rank (2R)

8GB

1600

Std

24

16GB

1333

LV

24

16GB

1600

Std

24

Quad Rank

(4R)

32GB

1333

LV

24

Single

Rank

(1R)

2GB

1333

LV

16

2GB

1333

LV

16

4GB

Std

16

Dual Rank (2R)

1600

4GB

1333

LV

16

8GB

1333

LV

16

8GB

1600

Std

16

MAXIMUM CAPACITY (GB)*

96 96 192

POPULATED DIMM SPEED (MHz)

192 192 384 384

1 DIMM

Per

Channel

2 DIMM

Per

Channel

3 DIMM

Per

Channel

1333

1333

1066 **

1600

1600

1600

1600

1333

1333

1600

1600

1333

1333

1600

1600

1333## 1333## 1066** 1333## 1066** 1333##

768

1333***

1333***

1066

32

1600

32 64 64 128 128

1600 1333**** 1600 1333**** 1333**** 1600 n/a

1333 n/a

1600 n/a

1333 n/a

1333 n/a

1600 n/a

NOTES:

Memory speed is a function of the processor QPI bus speed.

* Maximum capacity will vary based on individual server platform qualification schedule

** For HP SmartMemory, RDIMM support 3DPC@1066 at 1.35V. Third party memory may only support up to 3DPC@1066 at 1.5V.

*** LRDIMM enables 3 DIMMs per channel. HP SmartMemory will support up to 3DPC@1066 at 1.35V. Third party memory may only support 3DPC @1066 at 1.5V.

**** For HP SmartMemory, UDIMM is supported at 2DPC@1333. Third party memory may only support up to 2DPC@1066

## RBSU setting required

DIMM slot and configuration diagrams

Basic memory slot & population diagram

Population order; start with "A" first, "B" second, "C" third, etc.


QuickSpecs


Memory

Chnl 1

Chnl 2

Chnl 3

Chnl 4

8

9

10

7

5

6

11

12 slot #

1

4

2

3

Standard memory configuration (1 CPU model)

24 DIMM SLOTS (12 per CPU node)

CPU1

population order

A

B

I

E

K

H

D

G

C

L

F

J

8

9

10

7

5

6

11

12 slot #

1

4

2

3

CPU2

population order

C Chnl 1

J

H

L

D

G

K

Chnl 2

Chnl 3

I

F

B

E

A

Chnl 4

Chnl 1

Chnl 2

Chnl 3

Chnl 4

8GB, consisting of four (4) 2GB dual-rank PC3-10600 UDIMMs

8

9

10

7

5

6

11

12 slot #

1

4

2

3

CPU1

population order

A; empty

E; empty

I; 2GB DIMM

B; empty

F; empty

J; 2GB DIMM

L; empty

H; empty

D; 2GB DIMM

K; empty

G; empty

C; 2GB DIMM

Standard memory plus optional memory (1 CPU model)

60GB, consisting of three (3) 4GB RDIMMs plus six (6) 8GB RDIMMs

3x 4GB dual-rank PC3-10600 RDIMMs

6x 8GB dual-rank PC3-10600 RDIMMs

8

9

10

7

5

6

11

12 slot #

1

4

2

3

CPU2

population order

C; empty Chnl 1

G; empty

K; empty

D; empty

H; empty

L; empty

J; empty

Chnl 2

Chnl 3

F; empty

B; empty

I; empty

E; empty

A; empty

Chnl 4


QuickSpecs

Memory

Chnl 1

Chnl 2

Chnl 3

Chnl 4 10

11

12

8

9

7

5

6

4 slot #

1

2

3

CPU1

population order

A; 4GB DIMM

E; 8GB DIMM

I; 8GB DIMM

B; 4GB DIMM

F; 8GB DIMM

J; empty

L; empty

H; 8GB DIMM

D; 8GB DIMM

K; empty

G; 8GB DIMM

C; 4GB DIMM

Standard memory replaced with optional memory (1 CPU model)

RDIMM maximum configuration

Chnl 1

Chnl 2

Chnl 3

Chnl 4

192GB, consisting of twelve (12) 16GB quad-rank PC3L-10600 RDIMMs

9

10

11

7

8

6

12 slot #

1

2

4

5

3

CPU1

population order

A; 16GB DIMM

E; 16GB DIMM

I; 16GB DIMM

B: 16GB DIMM

F; 16GB DIMM

J; 16GB DIMM

L; 16GB DIMM

H; 16GB DIMM

D; 16GB DIMM

K; 16GB DIMM

G; 16GB DIMM

C; 16GB DIMM

9

10

11

7

8

6

12 slot #

1

2

4

5

3

UDIMM maximum configuration (1 CPU model)

64GB, consisting of eight (8) 4GB dual-rank PC3-10600 UDIMMs

10

11

12

8

9

7

5

6

4 slot #

1

2

3


CPU2

population order

C; empty Chnl 1

G; empty

K; empty

D; empty

H; empty

L; empty

Chnl 2

Chnl 3 J; empty

F; empty

B; empty

I; empty

E; empty

A; empty

Chnl 4

CPU2

population order

C; empty Chnl 1

G; empty

K; empty

D; empty

H; empty

Chnl 2

L; empty

J; empty

F; empty

B; empty

I; empty

E; empty

A; empty

Chnl 3

Chnl 4


QuickSpecs


Memory

Chnl 1

Chnl 2

Chnl 3

Chnl 4 10

11

12

8

9

7

5

6

4 slot #

1

2

3

CPU1

population order

A; 8GB DIMM

E; 8GB DIMM

I; empty

B; 8GB DIMM

F; 8GB DIMM

J; empty

L; empty

H; 8GB DIMM

D; 8GB DIMM

K;

G; 8GB DIMM

C; 8GB DIMM

Standard memory replaced with optional memory (2 CPU model)

RDIMM maximum configuration

10

11

12

8

9

7

5

6

4 slot #

1

2

3

CPU2

population order

C; empty Chnl 1

G; empty

K; empty

D; empty

H; empty

L; empty

Chnl 2

Chnl 3 J; empty

F; empty

B; empty

I; empty

E; empty

A; empty

Chnl 4

Chnl 1

Chnl 2

Chnl 3

Chnl 4

768GB, consisting of twenty-four (24) 32GB quad-rank PC3-10600 LRDIMMs DDR3 Registered (LRDIMM) memory, operating at

1333MHz or 1066MHz when populated at 3 DIMMs per Channel in 24 slots.

9

10

11

7

8

6

12 slot #

1

2

4

5

3

CPU1

population order

A; 32GB DIMM

E; 32GB DIMM

I; 32GB DIMM

B; 32GB DIMM

F; 32GB DIMM

J; 32GB DIMM

L; 32GB DIMM

H; 32GB DIMM

D; 32GB DIMM

K; 32GB DIMM

G; 32GB DIMM

C; 32GB DIMM slot #

1

2

4

5

3

6

7

8

9

10

11

12

CPU2

population order

A; 32GB DIMM Chnl 1

E; 32GB DIMM

I; 32GB DIMM

B; 32GB DIMM Chnl 2

F; 32GB DIMM

J; 32GB DIMM

L; 32GB DIMM Chnl 3

H; 32GB DIMM

D; 32GB DIMM

K; 32GB DIMM Chnl 4

G; 32GB DIMM

C; 32GB DIMM

UDIMM maximum configuration (2 CPU model)

128GB, consisting of sixteen (16) 8GB dual-rank PC3-10600E DDR3 Unbuffered (UDIMM) memory operating at 1333MHz when populated at 2 DIMMs per Channel in 16 slots


QuickSpecs


Memory

Chnl 1

Chnl 2

Chnl 3

Chnl 4 10

11

12

8

9

7

5

6

4 slot #

1

2

3

CPU1

population order

A; 8GB DIMM

E; 8GB DIMM

I; empty

B; 8GB DIMM

F; 8GB DIMM

J; empty

L; empty

H; 8GB DIMM

D; 8GB DIMM

K; empty

G; 8GB DIMM

C; 8GB DIMM

NOTE: Capacity references are rounded to the common Gigabyte values.

1GB = 1024MB

2GB = 2048MB

4GB = 4096MB

8GB = 8192MB

16 GB=16384MB

32GB = 32768MB

DDR3 memory options part number decoder

10

11

12

8

9

7

5

6

4 slot #

1

2

3

CPU2

population order

C; 8GB DIMM Chnl 1

G; 8GB DIMM

K; empty

D; 8GB DIMM

H; 8GB DIMM

L; empty

Chnl 2

Chnl 3 J; empty

F; 8GB DIMM

B; 8GB DIMM

I; empty

E; 8GB DIMM

A; 8GB DIMM

Chnl 4

Following are memory options available from HP:

HP Memory

NOTE: HP memory from previous generation servers are not qualified or warranted


QuickSpecs

Memory


with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for





Voltage Memory Kit


Kit


Voltage Memory Kit


Kit



Voltage Memory Kit


Kit



Kit


Voltage Memory Kit


Kit


Voltage Memory Kit


Kit


Voltage Memory Kit



Voltage Memory Kit




1333MHz memory may operate at a lower speed. Please see the see the "Memory" section later in this document and the Online Memory Configuration Tool for details at: www.hp.com/go/ddr3memory-configurator .


647893-B21

647895-B21

647897-B21

647899-B21

690802-B21

647901-B21

672631-B21

669320-B21

647905-B21

669322-B21

647907-B21

669324-B21

647909-B21

647903-B21


QuickSpecs

Memory






NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds. Memory speed is a function of the processor QPI speed.


QuickSpecs

Storage


1-4 Four LFF Hot-plug SAS/SATA hard drive bays

A Optional DVD-ROM, or DVD RW

1-8 Eight SFF Hot-plug SATA/SAS hard drive bays

A Optional DVD-ROM, or DVD RW

Drive Support

Removable Media

DVD-ROM

DVD RW

Quantity

Supported

Up to 1

Up to 1

Position

Supported Controller

A

A

Integrated IDE (ATAPI) (optional)

Integrated IDE (ATAPI) (optional)

Hard Drives

NOTE: HP Dynamic Smart Array B120i controller supports up to 3Gb/s speed in HP ProLiant DL160 Gen8. HP Smart Array controller is required to achieve 6Gb/s.

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives

600GB 6G SAS 15K

450GB 6G SAS 15K

Quantity

Supported

Up to 4

Position


1-4 HP Smart Array P420/ 1G FBWC controller

SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives

Quantity

Supported

Position


3TB 6G SAS 7.2K

2TB 6G SAS 7.2K

1TB 6G SAS 7.2K

Up to 4 1-4 HP Smart Array P222/512MB FBWC controller



QuickSpecs

Storage



Quantity

Supported

Position


900GB 6G SAS 10K

600GB 6G SAS 10K

450GB 6G SAS 10K

300GB 6G SAS 15K

300GB 6G SAS 10K

146GB 6G SAS 15K

Up to 8 1-8 HP Smart Array P420/ 1G FBWC controller



1TB 6G SATA 7.2K

500GB 6G SATA 7.2K

Quantity

Supported

Up to 8

Position

Supported

1-8

Controller



6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives

Quantity

Supported

Up to 4 3TB 6G SATA 7.2K

2TB 6G SATA 7.2K

1TB 6G SATA 7.2K

500GB 6G SATA 7.2K

Position


1-4 HP Dynamic Smart Array B120i controller

HP Smart Array P222/512MB FBWC controller


6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives

1TB 6G SATA 7.2K

500GB 6G SATA 7.2K

Quantity

Supported

Up to 4

Position

Supported

1-4

Controller




6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives

Quantity

Supported

Position


400GB 6G SAS SLC SFF SSD

200GB 6G SAS SLC SFF SSD

Up to 8 1-8 HP Smart Array P420/ 1G FBWC controller



Quantity

Supported

Position



QuickSpecs

Storage

800GB 6G SAS MLC SSD SFF



Up to 8 1-8




3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives

Quantity

Supported

Position


400GB 3G SATA MLC

200GB 3G SATA MLC

100GB 3G SATA MLC

Up to 4 1-4 HP Dynamic Smart Array B120i controller




Quantity

Supported

Position


400GB 3G SATA MLC

200GB 3G SATA MLC

100GB 3G SATA MLC




6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives

Quantity

Supported

Position


3TB 6G SATA 7.2K

2TB 6G SATA 7.2K

1TB 6G SATA 7.2K

500GB 6G SATA 7.2K




SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

Quantity

Supported

Position


600GB 6G SAS 15K

450GB 6G SAS 15K

Up to 4 1-4 HP Smart Array P222/512MB FBWC controller



QuickSpecs

Storage

External Storage

D2600 Disk Enclosure

D2700 Disk Enclosure

Quantity

Supported

Up to 4

Up to 8

Up to 2

Up to 4


Position

Supported Host Controller or Adapter

External

External

External

External

HP Smart Array P222/512MB FBWC Controller

HP Smart Array P421/1GB FBWC Controller


HP Smart Array P222/512MB FBWC Controller



Tape and Disk Backup

NOTE: For the complete range of tape drives, autoloaders, libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape . For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d . For the complete range of RDX drives and media see: http://www.hp.com/go/rdx . For hardware and software compatibility of HP disk and tape backup products see: http://www.hp.com/storage/SPOCK .

Position

Supported

External

Controller


Controller/HBA

Option Kit Part

Number

412911-B21

HP SCSI Tape Drives

LTO-2 Ultrium 448

LTO-3 Ultrium 920

LTO4 Ultrium 1760

LTO-4 Ultrium 1840

DAT 72

DAT 160

1U Rack-Mount Kit

3U Rack-Mount Kit

HP USB Tape Drives

DAT 72

DAT 160

1U USB Rack-Mount Kit

External USB 2.0 Port N/A

External HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS

Controller

631667-B21

HP SAS Tape Drives

DAT 160

LTO-2 Ultrium 448

LTO-3 Ultrium 920

LTO-4 Ultrium 1760

LTO-4 Ultrium 1840

LTO-5 Ultrium 3000

LTO-5 Ultrium 3280

1U Rack-Mount Kit

3U Rack-Mount Kit


QuickSpecs

Storage

HP SCSI Tape Autoloaders

1/8 G2 Autoloader

HP SCSI Tape Libraries

MSL2024

MSL4048

MSL8096

HP SAS Tape Autoloaders and Libraries

1/8 G2 Autoloader

MSL2024

MSL4048

MSL8096

HP Fibre Channel Tape

Libraries

MSL2024

MSL4048

MSL8096

HP USB RDX Removable

Disk Backup System

RDX160

RDX320

RDX500

RDX 1TB

HP D2D Backup Systems, iSCSI

D2D2500i

D2D4000i

HP D2D Backup Systems,

Fibre Channel

D2D4000fc

External

External

External

External

External




HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS

Controller

Please consult the EBS connectivity matrix at: http://www.hp.com/go/ebs for connectivity information and the supported Fibre Channel HBAs shown in this QuickSpecs.

USB 2.0 port

Rack Mount Embedded Network Controller. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

Rack Mount Direct server attach is not supported, requires connection via SAN fabric. See: http://www.hp.com/storage/SPOCK

412911-B21

412911-B21

631667-B21

N/A


QuickSpecs

Technical Specifications

System Unit


Dimensions (H x W x D)

(with bezel)

Weight

(approximate)

Input Requirements

(per power supply)

BTU Rating

Power Specifications

Power Supply Output

(per power supply)

System Inlet

Temperature

4 LFF

8 SFF

1.7" (43.2mm) Height x 17.1" (434.6mm) Width x

29.5" (750mm) Length

1.7" (43.2mm) Height x 17.1" (434.6mm) Width x

27.5" (699mm) Length

33..00 lb (15.2kg) Maximum

(all hard drives, power supplies, and processors installed)

Minimum

(one hard drive, power supply, and processor installed)

Rated Line Voltage

Rated Input Current

31 lb (14.1kg)

100 to 120 VAC, 200 to 240 VAC

10 A at 100 VAC

5 A at 200 VAC

50 Hz to 60 Hz Rated Input Frequency

Rated Input Power 562 W at 100V AC input

562 W at 200V AC input

500W Maximum

460W

750W

1917 at 100 V AC

1898 at 115 V AC

1856 at 200 V AC

1850 at 230 V AC

1764 at 100V AC

1736 at 115V AC

1694 at 200V AC

1687 at 230V AC

2878 at 100 V AC

2834 at 115 V AC

2769 at 200 V AC

2758 at 230 V AC

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient

Or www.hp.com/go/hppoweradvisor

- Click on the system of interest. Example: DL160 G8

- Follow the instructions of the next screens.

Rated Steady-State Power 500 Watts (at 100 VAC),

500 Watts (at 200 VAC)

Maximum Peak Power

(See Power Specifications

Tables)

Operating

500Watts (at 100 VAC),

500 Watts (at 200 VAC)

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained


QuickSpecs



Relative Humidity

(non-condensing)

Altitude

Acoustic Noise

Emissions Classification

(EMC)

Non-operating

Operating

Operating

sunlight. Maximum rate of change is 10°C/hr

(18°F/hr). The upper limit may be limited by the type and number of options installed.

System performance may be reduced if operating with a fan fault or above 30°C (86°F).

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, noncondensing.

Non-operating

Operating

Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

NOTE: The listed sound levels apply to standard shipping configurations.

Additional options may result in increased sound levels.

Idle

5% to 95% relative humidity (Rh), 38.7° C (101.7°

F) maximum wet bulb temperature, noncondensing

30480 m (10,000 ft). This value may be limited by the type and number of options installed.

Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

LWAd 5.3 B (1P SKU)

5.3 B (2P SKU)

LpAm 36 dBA (1P SKU)

36 dBA (2P SKU)

FCC Rating

LWAd

LpAm

Normative Standards

5.3 B (1P SKU)

5.9 B (2P SKU)

37 dBA (1P SKU)

42 dBA (2P SKU)

Class A

CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;

ICES-003; CNS13438; GB9254; K22;K24; EN

61000-3-2; EN 61000-3-3; EN 60950-1; IEC

60950-1

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.


QuickSpecs



HP iLO 4 On System

Management Processor

Architecture

Processor

PCI Express based health and remote management ASIC

Embedded ARM processor core operating at 400MHz

Upgradeability

Video Support

Firmware upgradeable via Flash ROM

1920 x 1200 (16 bpp) DVR max resolution

Interfaces

Memory

HP iLO Dedicated * Network connection (10/100/1000 Mb/s) on rack, tower and

SL systems

*Optional Module on some servers

HP iLO Shared Network connection (10/100/1000 Mb/s) on rack, tower and SL systems

HP iLO network connection to blades (100 Mb/s) to Onboard Administrator

(with 10/100/1000 Mb/s uplink) on blade systems

16 MB Flash

256 MB DDR 3 with ECC (112 MB after ECC and video)

Operating System

Support

For information on HP's Certified and Supported ProLiant Servers for OS and

Virtualization Software and latest listing of software drivers available for your server including how to purchase from HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport

Client System Support

For information on Client System Support, please visit the HP iLO Feature

Comparison Site at: www.hp.com/go/compareilo

Client Browser Support

Microsoft Internet Explorer 9

NOTE: For customers using Protected Mode, please use the Java based version of Integrated Remote Console.


NOTE: For customers using Protected Mode, please use the Java based version of Integrated Remote Console.


Firefox Extended Support Release (ESR) 10 (on supported Windows and Linux systems

Firefox 3.6 (on supported Windows and Linux systems)

Command Line Support

Secure Shell and serial port access

Secure Socket Layer

Security

Secure Shell version 2

Advanced Encryption Standard (AES) and Triple Data Encryption Standard

(3DES) on browser, CLP and XML scripting interface

AES encryption of video

RC4 encryption of video

Active Directory v1.0 (Windows 2003)

Directory Support

Services

Driver Support

HP ProLiant iLO 4 Management Controller Driver Package

Management protocols supported

SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management

Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP

RIBCL XML


QuickSpecs



HP Ethernet 1Gb 2-port

361i Adapter

Network Interface

10Base-T/100Base-TX/1000Base-TX

Capability

IEEE 802.3 10Base-T

IEEE 802.3ab 1000Base-T

IEEE 802.3u 100Base-TX

Data Transfer Method

IEEE 1588, IEEE 802.1AS

PCI Express v 2.1, 5.0 GT/s and 2.5 GT/s bus speeds and supports for x1, x2, x4 links widths (Lanes)

Controller

I350 Powerville

Network Transfer Rate

10Base-T (Half-Duplex) 10 Mb/s per port, 20 Mb/s Combined

10Base-T (Full-Duplex) 20 Mb/s per port, 40 Mb/S Combined

100Base-TX (Half-Duplex) 100 Mb/s per port, 200 Mb/s Combined

100Base-TX (Full-Duplex) 200 Mb/s per port, 400 Mb/s Combined

1000Base-TX (Half and

Full-Duplex)

1000Mb/s per port, 2000 Mb/s Combined

Connector

Cable Support

RJ-45

10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)

10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m)

HP Dynamic Smart Array

B120i Controller

Dimensions

Disk Drive Interface -

Transfer rate

SATA Connectors

Server Interface

SATA Speed

Embedded

3Gb/s SATA (Serial Attached SCSI)

6 internal connectors w/hot plug support

PCIe 2.0

3Gb/s SATA links

Cache Memory

Optional 40-bit 512MB ECC protected Flash Backed Write Cache (FBWC)

Logical Drives Supported Zero Memory, Up to 2 logical volumes (6 physical drives)

Host Memory Addressing 64-bit, supporting greater than 4GB server memory space

Hot Plug Support

RAID Support

Yes

RAID 0 (Striping), RAID 1 (Mirroring)

RAID 1+0 (Striping & Mirroring)

RAID 5 with optional 512MB FBWC

NOTE: 512 MB cache is required to enable RAID 5 support


QuickSpecs



Environment-friendly

Products and Approach

End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.

Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities.

This information (product disassembly instructions) is posted on the Hewlett

Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

© Copyright 2012 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.


HP ProLiant DL160 Gen8

What's New

Entry Model

Base Model

Energy Star- Performance Model

Step 1: Base Configuration (choose one of the following configurable models)

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Step 3: Choose Additional Factory Integratable Options

Step 4: Choose Additional Options for Factory Integration

Drive Support

Related manuals

Table of contents

HP ProLiant DL160 Gen8

What's New

Entry Model

Base Model

Energy Star- Performance Model

Step 1: Base Configuration (choose one of the following configurable models)

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

Step 3: Choose Additional Factory Integratable Options

Step 4: Choose Additional Options for Factory Integration

Drive Support

Related manuals

Hewlett Packard Enterprise

666282-B21

Super Talent Technology

STU4GM1W

Table of contents