HÅG SoFi Mesh 7500 office chair User guide

HÅG SoFi Mesh 7500 - How to get the most out of your chair

Lumbar support

SlideBack arms height adjustment

SlideBack arms width adjustment adjustment

Seat height

Seat depth

Lock switch

Tension switch

1. Get yourself into balance: This is achieved by adjusting the seat height and the seat depth. a) Seat height – left side of the seat pan. b) Seat depth – right side of the seat pan. Pushing the lever forward reduces seat depth, pulling the lever back increases seat depth. c) Position yourself on the seat pan so that you are in balance. If the seat pan is tilting forward you need to position your body further back on the seat to achieve the balance point.

2. Freedom of movement: This is achieved by adjusting the tension switch. a) The tension switch is located on the right side of the mechanism near the gas lift. There are five different positions – for less freedom of movement, push the tension switch in towards the gas lift, or for more movement pull the tension switch away from the gas lift. b) If you want to lock the chair, use the lever located on the left side of the mechanism near the gas lift.

3. Arm rests: Multifunctional providing width height and depth adjustment a) Arm height adjustment – press trigger under arm pad b) Arm width adjustment – release level located on arm bracket under seat c) Arm depth adjustment – slide arms back and forward to achieve desired depth

www.backcare.com.au

- [email protected]