OS NINO
DVB-S2 + DVB-T2/C
F u l l H D L i n u x C o m b o R e c e i v e r
1
Congratulations on purchasing an EDISION OS NINO DVB-S2 + DVB-T2/C
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
146mm
Remote control with 2 AAA batteries Documentation
HELP
TV/RADIO
TEXT
SUBTITL
ME
DIA
AUDIO
POR
VOL
VOL
+
BACK
RA
TIO
TV POWER
VIDEO
TIMER
CONTXT
< PREV
NEXT
Service note
Please contact your EDISION specialist dealer for any further support and service.
Receiver EDISION OS NINO DVB-S2 + DVB-T2/C
Notes: The front is factory fitted with a protective foil which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1 Infrared sensor for the reception of remote
control commands
2 Display LED, displays current information
3 Card reader
Back Panel
4 Input for connecting to terrestrial or cable signal
from the antenna
5 LNB IN: Connection for the coaxial cable
to the signal from the satellite system
6 IR IN: Infrared connection port
7 HD OUT: Connection to an HDTV quality TV
8 ETHERNET: Ethernet port RJ45 10/100 Mbps
9 S/PDIF: Audio interface for amplifier/audio console
10 RS 232: For connecting to a PC,
using RS-232 cable, for receiver software update
11 Connection for an adapter (DC 12V/2,0A)
Subpage
12 / 2 x USB: Connection for USB storage devices
4
1
ANT IN
12
5
LNB IN 13/18V
400mA MAX
6
IR IN
7
HD OUT
2
8
ETHERNET
3
9
10
11
S/PDIF RS232 DC 12V/2,0 A
2
Connecting and switching on
Note: For interference-free satellite TV reception, a specialist technician must calibrate your satellite
TV system with a digital TV level meter
• Connect the receiver using HDMI cable via
the HD OUT output port to your TV’s HDMI input port
• Now connect the receiver to the satellite
antenna cable via the ANT IN or LNB IN input.
• Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
• Connect the receiver to the power supply.
• The receiver starts with the BOOT process
and is operational within a short time
ANT IN: coaxial-wire input from terrestrial / cable signal
LNB IN: Connecting the cable to the satellite signal
ANT IN IR IN HD OUT
HD OUT:
Output receiver
ETHERNET S/PDIF RS232 DC 12V/2,0 A
Power socket
HDMI cable
TV set connection panel
Use an HDMI input!
HDMI in
2
1 m i
OS NINO
DVB-S2 + DVB-T2/C
F u l l H D L i n u x C o m b o R e c e i v e r
3
<
PREV
Remote Control UNIVERSAL 1
EDISION UNIVERSAL 1 REMOTE CONTROL is compatible with all EDISION STB’s*, plus it is pre-programmed with 5 basic functions for SAMSUNG & LG** tv sets. Alternatively, you can program its 5 programmable buttons to any 5 functions of your TV.
Power
Switches between operation and standby
< (PREV)
Return to the previous channel/service or move to the end of the Service List or the Play List
Help
This provides users with a quick guide of using Edision OS nino
Menu
Open main menu & select sub menu using by navigation buttons
EXIT
Close and return to the previous menu and screen
TV/RADIO
HELP
SUBTITLE
TEXT
MEDIA
AUDIO
VOL +
VOL -
PORTAL
VIDEO
TV POWER
RATIO
BACK
TIMER
FAV
NUMERIC KEY (0-9)
Control the numerical operation and change the Channel/Service number directly
> (NEXT)
Go to the next channel/service or move to the beginning of the
Service List or the Play List
TIMER
Start timer function
INFO
Displays the Electronic Program Guide (EPG) information if provided
RADIO - TV
Switch to TV mode.
Switch to Radio mode
/
EPG
Displays the Electronic Program Guide (EPG) information if provided
COLOR BUTTONS
Activates certain menu functions.
Usage instructions are shown in each OSD menu
Audio
Select an audio track and a sound mode
CONTXT Mute
Mutes or unmutes the audio temporarily
TEXT
Switch between the teletext and TV modes
SUBTITLE
Display the subtitle language list
PLAY
Starts timeshift if available
< PREV NEXT >
REC
Activates immediately recording-option
Notes: Many of the listed buttons have multiple functions, which, are displayed in the menus. Some buttons and functions are optional. Important functions and buttons are briefly explained below. The buttons to be used are marked in red in the diagrams.
Manual InstructIon for learn reMote control eDIsIon unIVersal 1
Your set-top-box remote control has 5 learning-function keys, in the up right hand side TV keypad panel area. Each one can be used accordingly as the following example:
1. Turning your TV set ON/OFF [tV PoWer]
2. Selecting screen RATIO [auto, 16:9, 4:3, etc)]
3. Increasing/decreasing volume [Vol+ , Vol-]
4. Command confirmation [BacK or eXIt]
The other 48 keys are for the control of the EDISION set-top-box.
VOL +
VOL -
TV POWER
RATIO
BACK set uP for learnIng functIon
• Press [tV PoWer] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the key. This means the remote control is in the learning mode.
• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the [PoWer] key, then the red LED is flashing. It means this button is ready to receive the learning signal.
• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between these two ports has to be about 2~3 CM).
• Then press the key which is to be learned in your original TV remote control, for example the [PoWer] key of your original TV remote control continuously for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the signal and you have completed the learning procedure of ON/OFF [tV PoWer] key.
• Then release the [PoWer] key of your original TV remote control.
If the copying procedure fails , the red LED will blink and stay OFF. In this case please repeat the procedure.
For the next programmable function, please repeat steps 1 to 3:
• Selecting screen ratio with RATIO [auto, 16:9, 4:3, etc]
• Increasing/decreasing volume [Vol+ , Vol-]
• Command confirmation [BacK or eXIt]
Now you can operate your TV with the 5 programmed by you keys of your set-top box remote control. During the operation, the LED will flash to indicate that the signal is transmitted!
* For EDISION STB compatibility, please visit our webpage
**LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd
respectively. Any brand name reference in this text is only for informational purposes towards the consumer
that is interested in the product.
Visit us on:
www.edision.gr
