Technical description VIPCOS_rev9

Technical Description VIPCOS

V onamic IP Co mmunication S ystem


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved

Revision 9 Page 1 of 24

1 Changelist

6

7

8

9

3

4

5

Revision Date

1

2

10.02.2014

11.02.2014

Change

First Revision

Update V1000 back view

11.02.2014 Updated Introduction

05.03.2014 Update module design, new pictures

16.04.2014 Update technical data V614, V640

Issued by

W. Weber

W. Weber

W. Weber

W. Weber

W. Weber

30.04.2014 Update technical data V900, V910, V920 W. Weber

22.05.2014 Update technical data V1000 W. Weber

30.05.2014 Update IP Loudspeakers

11.07.2014 Update Crane Call Station V670

W. Weber

W. Weber

2 Table of Contents

1

2

3

4

4.1

Changelist................................................................................................................ 2

Table of Contents .................................................................................................... 2

Introduction VIPCOS – The Vonamic IP Communication System ............................ 4

VIPCOS System components .................................................................................. 5

VIPCOS Desktop Call Station V 640 ............................................................................. 6

4.1.1 V 640 Design ................................................................................................................ 6

4.1.2 V 640 Technical Data ................................................................................................... 7

4.2 VIPCOS Desktop Call Station Extension V 640e .......................................................... 7

4.2.1 V 640e Design .............................................................................................................. 7

4.2.2 V 640e Technical Data.................................................................................................. 7

4.3 VIPCOS Weather Proof Call Station V 615 ................................................................... 8

4.3.1 V 615 Design ................................................................................................................ 8

4.3.2 V 615 Features ............................................................................................................. 9

4.3.3 V 615 Technical Data ................................................................................................... 9

4.4 VIPCOS – Crane Call Station V 670 ........................................................................... 11

4.4.1 V 670 Design .............................................................................................................. 11


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.4.2 V 670 Technical Data ................................................................................................. 12

4.5 VIPCOS - UP0 Gateway V 900 ................................................................................... 13

4.5.1 V 900 Design .............................................................................................................. 13

4.5.2 V 900 Features ........................................................................................................... 14

4.5.3 V 900 Technical Data ................................................................................................. 14

4.6 VIPCOS – UK0 Adaptor V 910.................................................................................... 15

4.6.1 V 910 Design .............................................................................................................. 15

4.6.2 V 910 Features ........................................................................................................... 16

4.6.3 V 910 Technical Data ................................................................................................. 16

4.7 VIPCOS Analogue Adaptor V 920 .............................................................................. 17

4.7.1 V 920 Design .............................................................................................................. 17

4.7.2 V 920 Technical Data ................................................................................................. 17

4.8 VIPCOS PA Controller V 1000 .................................................................................... 18

4.8.1 V 1000 Technical Data................................................................................................ 19

4.9 VIPCOS IP Loudspeakers .......................................................................................... 20

4.9.1 Network Monitor Box VIPCOS V530 ........................................................................... 21

4.9.2 V 530 Technical Data ................................................................................................. 22

4.9.3 Weatherproof Network Horn Speaker VIPCOS V550 .................................................. 23

4.9.4 V 550 Technical Data ................................................................................................. 24


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


3 Introduction VIPCOS – The

V

onamic

IP Co

mmunication

S

ystem

VIPCOS is a serverless, ethernet based communication system for intercom, public address and general alarm developed for challenging requirements.

In contrast to conventional communication systems VIPCOS works serverless and operates without any central controls. Each subscriber has to the entire software on board, which enables the connection to other subscribers. This ensures highest system reliability.

The operation and configuration of VIPCOS is easy. Each unit is accessible via web browser.

The configuration can be stored and restored.

Up to 9.000 subscribers can communicate in a system, in extended networks even more.

Analogue and digital call stations can easily be integrated via adaptors and gateways; telephone networks (ISDN) can be interfaced. The connection to VIPCOS VoIP units is established via Ethernet. Furthermore, each unit can be configured as a SIP client, which offers the possibility of directly integrating it into SIP systems.

VIPCOS can be extended modularly by using standard network components and it features excellent speech intelligibility through a bandwidth of 20Hz to 20 kHz.

The system safety is ensured by high redundancy (up to n + n) and cyclic monitoring of the system performance. Another advantage of VIPCOS is the low basic investment, especially for smallest systems. The smallest possible system consists of two subscribers without any central exchange. The two call stations simply have to be connected to the Ethernet and are operational.

VIPCOS can be integrated into an existing infrastructure of analogue and digital intercom systems. It is easy to maintain and operate.

The network capacity is between 65 Kbit/s (G711 and G722) and 705 Kbit/s (PCMA 44,1 kHz).

VIPCOS is able to stream multi- as well as unicast. Multicast is used for group calls, which drastically decreases the network load. The latency of VIPCOS is <50ms.

The system is easy to install due to standard patch cables and connectors.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4 VIPCOS System components

The Vonamic IP Communication System – VIPCOS comprises of a various number of call stations for indoor and outdoor applications, software, digital and analogue gateways, an intelligent PA controller as well as IP loudspeakers.

All components can be connected via network to each other without using any server.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.1 VIPCOS Desktop Call Station V 640

The VIPCOS desktop call station V 640 enables users to connect directly to other call stations, loudspeakers, third party SIP clients, etc. It can be programmed individually and has a backlit

LC display that visualizes functions and information received from remote stations.

A memory for acoustic signals and pre recorded messages is on board.

Incoming calls are indicated during ongoing calls. The VIPCOS V640 call station’s voice bandwidth lies between 100 Hz to 16 kHz full- and half duplex.

Due to the system’s decentralized design, the call station represents an intelligent entity in its own right. For example, it displays error messages both optically and acoustically, whenever other devices (such as call stations or amplifiers) break down, when one’s own call station’s connection to the network node is interrupted or when the entire network node fails completely.

If a call station can no longer connect to other subscribers, an error message is displayed onscreen. In addition, operators are alerted by a buzzing sound as well as by the flashing of a pre-configured key.

4.1.1 V 640 Design

The device’s basic housing contains at least eight keys. The number of keys can be progressively extended to a maximum of 256 by removing blind plates, by incorporating eightpart button strips as well as by flange-mounting additional housings. The loudspeaker volume can be adjusted using keys. The digital call station can be connected using one or more network cables (two RJ 45 sockets for one network or for ring networks rapid spanning tree).

Voltage can be supplied using a separate power input or via Power over Ethernet (PoE).


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.1.2 V 640 Technical Data

Operating voltage:

LF bandwidth:

Loudspeaker amplifier:

Microphone:

Line interfaces:

Transmission protocol:

Codec sampling rate:

Voice memory duration:

Permitted climatic condition:

Degree of protection:

Colour:

2 x PoE

16 kHz max. 1 W

Electret microphone

2 RJ45 for LAN

VIPCOS protocol/SIP

44,1 kHz / 16 bit or more

7 minutes at G711

3K4 according to DIN IEC 721

IP 20 black

4.2 VIPCOS Desktop Call Station Extension V 640e

Using the extension housing, it is possible to extend the call station by up to 5 x 48 keys to a maximum of 256 freely programmable keys.

In order to get a direct speech connection to a unlimited number of subscribers a keyboard can be added to the V640 as well.

4.2.1 V 640e Design

The extension housing includes 48 keys. The keyboard extension can easily be attached to the

VIPCOS V640 call station using the enclosed material.

4.2.2 V 640e Technical Data

Operating voltage:



Color supplied by master


IP 20 black


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.3 VIPCOS Weather Proof Call Station V 615

The VIPCOS weatherproof call station V615 has 1 ... 3 double toggle keys for 2 ... 6 lines or alternatively 2 double toggle keys plus keypad. It can be extended with up to 3 additional housings with further 6 lines each.

The call station can be easily integrated to the VIPCOS system by connecting it directly to the

Ethernet or in order to bypass longer distances via digital UP0 gateway.

To ensure optimal communication between call stations, it is possible to adapt the call station to varying degrees of background noise by individually adjusting microphone and loudspeaker amplification. The call station is delivered with an additional, built-in 40W amplifier for integrating and operating a local loudspeaker circuit. There are several ways of using the additional amplifier, for example:

•

All incoming intercom/PA announcements are transmitted by the additional amplifier and the associated additional loudspeaker.

•

The additional amplifier and associated loudspeaker can be used for local PA announcements from a call station microphone.

4.3.1 V 615 Design

The weatherproof call station is made of fiber-glass reinforced polyester and has an orange-colored housing.

The housing (500 X 120 X 180 mm) is dust-protected and splash-proof in accordance with the requirements of DIN EN 60529

(protection class IP 66).

The front panel contains a microphone, a loudspeaker as well as up to three key inserts with integrated line lamps.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.3.2 V 615 Features

•

The VIPCOS V615 call station can be used within an operating voltage range of 12, 24,

48 ... 56 V DC and PoE

•

Amplifier for external loudspeakers included, 40 W with 24VDC external power, 10 W at

PoE

•

Current operational status is signalled by light-emitting diodes

•

Can be installed after lifting the housing lid by drilling four installation holes in the basic housing

•

PA operation using additional loudspeaker (standard feature); volume pre-set on an exworks basis

•

Volume control remote adjustable

•

Microphone sensitivity (sound-compensated microphone) remote adjustable

•

Compression gland for additional loudspeaker line (standard feature).

•

IP66 according to DIN EN 60529

•

Full- and half duplex communication possible


Operating voltage range:

Power input:

Neutral:

Max.:

Max.:

12, 24, 48 ... 56 V DC and PoE

≤

25 mA

≤

100 mA

≤

2A with 40W (24V additional power supply) additional amplifier

Permitted output resistance

for power supply: for Up0 interface:



Frequency range:

Line interface Ua/Ub:

Protection class (DIN EN 60529):

Housing dimensions

Height x Width x Depth:

Weight:

Operating temperature range:

Cable entry points (3 pieces):


200

400

Ω

Ω

IP 66

(= 3 km cable length for 0.8 mm wire

(= 3 km cable length for 0.8 mm wire

VIPOCOS/SIP max. 1W

300Hz ... 16kHz (-3 dB)

Up0 interface acc. to CCITT

500 x 120 x 180 mm

6,5kg

-20 ... +85oC

2x M25; 1x M20

Vonamic GmbH

∅

∅

)

)

Issued by W. Weber

Dated, 11.07.2014

All rights reserved


Connectors:

40W additional amplifier:

Operating voltage range:

Power input

Neutral:

Max.:

Output:

Frequency range:

Distortion factor:

0,2 ... 2,5 mm2

24V ...30V

10 mA

2000 mA

40W ( at 24V)

20 Hz...20 kHz (-3 dB)

≤

1 %


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.4 VIPCOS – Crane Call Station V 670

The VIPCOS crane call station V 670 enables users to connect directly to other call stations, loudspeakers, third party SIP clients, etc. It can be programmed individually and can be integrated in the VIPCOS system via PoE port.

A memory for acoustic signals and pre recorded messages is on board.

As crane call station it is usually connected to an external WLAN network and therefore independent from cabled infrastructure. Two standards can be used IEEE 802.11a/b/g/h/I and

IEEE.11n for WLAN connection with frequency bands, 2.4 GHz or 5 GHz.

The WLAN access client can be supplied including location specific antennas optionally.

4.4.1 V 670 Design

The VIPCOS crane call station V670 is made of 3mm aluminium housing, po wder coated and optional with anti graffiti coat for a high protection against scratches.

It has 16 illuminated push buttons with replaceable protection caps and labels.

Further it has a flexible goose neck microphone, an integrated full range loudspeaker and a weather proof cable gland/plug for the network connection.

An additional power supply is not necessary; the device is powered via a redundant PoE port only.

The mounting plate of the VIPCOS crane call station V 670 will be delivered with quick access fasteners. Due to this and the weather proof cable gland / plug the call station is installed within seconds without any tools.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved



Operating voltage:

LF bandwidth:


Microphone:

Line interfaces:



Voice memory duration:



Colour:

2 x PoE

16 kHz max. 1 W

Electret microphone

2 RJ45 for LAN

VIPCOS protocol/SIP

44,1 kHz / 16 bit or more

7 minutes at G711


IP 67 orange RAL 2004


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.5 VIPCOS - UP0 Gateway V 900

The VIPCOS UP0 gateway V900 connects digital call stations to the decentralized VIPCOS communication system.

Up to 4 weatherproof call stations can integrated via the VIPCOS UP0 gateway with a distance of 3 kilometres. The gateway has a redundant Ethernet connection on its front panel.

4.5.1 V 900 Design

The slot is located in a 19” housing according to IEC 60297-1 with three height units. Up to 10 units can be installed in a standard 19” sub rack.

The front panel contains 2 RJ45 sockets an10 LED’s for status indication.

The rear panel contains 4 RJ45 sockets, 2 two-way contacts for fault indication, 4 fuses (4x 1A) and two terminations for a redundant power supply.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.5.2 V 900 Features

•

IP adapter for digital outdoor call stations

•

Integrated redundant switch

•

Configurable web browser or VIPCOS Control

•

Operating monitoring

•

Monitoring of call stations connected

•

Watchdog

•

2 two-way contacts for fault indication

•

Mode of operation can be configured individually for each component port.


Operating voltages:

Cable lengths:

48V ...56V

max. 3 km for sym. shielded twisted pair with 0.8 mm Ø

3K4 acc. to DIN IEC 721, part 3-3 Operating temperature range:

No terminating resistors required!


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.6 VIPCOS – UK0 Adaptor V 910

The VIPCOS UK0 gateway V910 connects digital call stations to the decentralized VIPCOS communication system.

Up to 4 weatherproof call stations can integrated via the VIPCOS UK0 gateway with a distance of 3 kilometres. The gateway has a redundant

Ethernet connection on its front panel.

4.6.1 V 910 Design





Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.6.2 V 910 Features

•

IP adapter for digital outdoor call stations

•

Integrated redundant switch

•

Configurable web browser or VIPCOS Control

•

Operating monitoring

•

Monitoring of call stations connected

•

Watchdog

•

2 two-way contacts for fault indication

•

Mode of operation can be configured individually for each component port.


Operating voltages:

Cable lengths:

48V ...56V

max. 3 km for sym. shielded twisted pair with 0.8 mm Ø

3K4 acc. to DIN IEC 721, part 3-3 Operating temperature range:

No terminating resistors required!


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.7 VIPCOS Analogue Adaptor V 920




This module enables you to connect two analogue call stations with up to six lines each.

4.7.1 V 920 Design

The module is a printed plate in European format. Ten LED’s on the front panel emit flashing signals that indicate its current operational status.

The module’s front panel contains two RJ45 sockets that allow for the module to be linked either to one data network or to a redundant data network rapid spanning tree.

The symmetrical NF outputs enable users to connect further devices.


Module format:

Operating voltages:

Power input:

Audio level:


LF bandwidth:


Maximum cable length for call station:



Issued by W. Weber

Dated, 11.07.2014

8 module units, 3 height units

+ 48 VDC redundant max. 500 mA

0 dB/ 775 mV

VIPCOS/SIP

> 16 kHz

24 kHz / 16 bit or more

3 km


Vonamic GmbH

All rights reserved


4.8 VIPCOS PA Controller V 1000

The VIPCOS PA controller V1000 is an entire PA system for 100 Volt loudspeaker systems.

Via Ethernet it can be integrated easily into the VIPCOS communication system.

The PA controller has an integrated 400W power amplifier on board and can operate up to six loudspeaker lines or 3 loudspeaker loops.

The PA controller is continuously monitored via an additional PA controller. In case of a failure, short circuit, interruption, earth connection or impedance changes, actual settings are transferred to the hot standby unit. The impedance measuring is carried out with an accuracy of

<5% with a possibility to program the tolerances in steps of 5, 10, 15, 20, 25 %.

Main and minor failures can be transferred via dry contacts to third party equipment.

The device has two Ethernet connections with Rapid Spanning Tree for integration into the

VIPCOS system. The LCD-display shows the status and failure reporting.

Further the V1000 has a DSP for loudness, bass and treble.

A built-in controlled memory for pre-recorded messages or alarm tones is easy to access via network.

The power supply is between 24 – 56VDC and/or 230VAC.

Any number of these PA controllers can be in a system, hot standby units are optional.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved



Operating voltage

Power input

Neutral:

Maximum:

Output:

Output voltage:

Load resistance:

Internal resistance:

Input voltage:

Input resistance:

Lower frequency range:

Upper frequency range:

Bass control:

Treble control:

Distortion factor

(nominal power 1kHz) for 70V:

(nominal power 1kHz) for 100V:


48...56V DC / 230V /115V AC

90mA

40mA

≙

18W

10A

400W

100V

40 Ω

10

Ω

≤ 4 Ω

≤ 1 Ω

750mV

≥ 10k Ω

80Hz -3dB ±1dB

16kHz -3dB ±1dB

150Hz -8dB/+8dB ±1dB

8kHz -8dB/+8dB ±1dB

Ua ≤ 0,5%

Ua

≤

2%

3K4 in acc. with DIN IEC 721, Part 3-3


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.9 VIPCOS IP Loudspeakers

VIPCOS IP loudspeakers are easy to install and designed for a direct integration into the

VIPCOS network. The VoIP loudspeaker is powered via PoE. The IP loudspeakers operating serverless and do not need any further central exchange or amplification. The network loudspeaker can be addressed individually or in groups and can receive audio files directly from the network streamer VIPCOS Blaster or accessed via any VIPCOS call station.

Further it can be integrated in any SIP network.

Depending on the surroundings and the application, the expectations regarding a reliable irradiation and communication system may vary.

The low power consumption allows for a supply by Power over Ethernet, thus rendering a local power supply redundant. The characteristics of the IP loudspeaker can be configured freely meeting your individual requirements, e.g. such as a simple implementation of group memberships and SIP configuration.

Unconfined operational readiness is the top priority when using the IP loudspeakers. This is guaranteed by a permanent and logical monitoring in the serverless units.

Alternatively, the operational safety can be synchronized on the universally recognized network protocol SNMP (Simple Network Management Protocol), thus guaranteeing a reliable system monitoring.

Due to standardized interfaces and protocols communication and configuration will become very easy. Hardware configuration, software updates and changes of the loudspeakers are carried out via a standard web browser like Internet Explorer or Mozilla Firefox. This enables a simple and safe handling.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.9.1 Network Monitor Box VIPCOS V530

The VIPCOS 530 monitor loudspeaker offers premium sound quality for acoustic background irradiation even at medium and low acoustic pressure. The loudspeaker is excellently suitable for a wide variety of applications such as in offices, restaurants, department stores and cafes.

Due to its rotary ball joint the VIPCOS 530 is easy to install and to position. It is connected to the network with a standard RJ 45 connection. Power is supplied by PoE.

The VIPCOS 530 is easy to install and therefore does not need an additional 100V cabling or control centres. The network loudspeaker can be addressed individually and can emit audio files in CD quality. These files can be fed into the network via the network streamer

VIPCOS Blaster.

The loudspeaker can also be embedded directly into the Vonamic IP Communication

System (VIPCOS). Thus, a fully functional intercom system can be realized with just one loudspeaker and the desk top call station

VIPCOS 640.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved



Inputs:

Network:

Computing capacity:

Protocols:

Audio codec1:

Audio codec2:

Bitrate:

Frequency range:

Operating voltage:

Power consumption:

Temperature range:

1 x isolated input (optional)

1 x microphone (optional, Electret and dynamic)

1 x Ethernet 100 Base-T

Auto MDX / MDIX

55 MIPS

TCP/IPv4, UDP, ARP, RTP/RTCP,

DHCP, ICMP, VIPCOS (serverless),

SIP (STUN) Standard and serverless,

SNMP (optional),HTTP, TFTP

PCMA16 with 44,1kHz

CD-Quality mono

Bitrate: 705 kbps

G.711alaw, with 3,4 kHz

Telephone quality

64 kbps

G.711 alaw, 300 Hz

–

3400 Hz

(optional

μ law) PCM16, 75Hz

–

12.500Hz

PoE (Power over Ethernet) acc. to IEEE-Standard 802.3af

15W max.

-20 up to +70 °C


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


4.9.3 Weatherproof Network Horn Speaker VIPCOS V550

The VIPCOS 550 horn speaker is designed to withstand the roughest conditions in shipping and heavy industry.

The speakers are made of light, impact-proof and fire-proof ABS. For easy mounting the speakers are fitted with a stainless steel mounting bracket, which can be adjusted with a ratchet. The products have been tested for IP66 and IP67 protection.

The network loudspeaker can be addressed

individually and can receive audio files directly from the network streamer VIPCOS

Blaster. The loudspeaker can also be embedded directly into the Vonamic IP

Communication System (VIPCOS). Thus, a fully functional intercom system can be realized with just one loudspeaker and the desk top call station VIPCOS 640.

It is connected to the network with a standard RJ 45 connection. Power is supplied by PoE.


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved



Inputs:

Network:

Computing capacity:

Protocols:

Audio codec1:

Audio codec2:

Bitrate:

Frequency range:

Operating voltage:

Power consumption:

Temperature range:

Mechanical data:

Material:

Color:

Weight:

Protection class:

1 x isolated input (optional)

1 x microphone (optional, Electret and dynamic)

1 x Ethernet 100 Base-T

Auto MDX / MDIX

55 MIPS

TCP/IPv4, UDP, ARP, RTP/RTCP,

DHCP, ICMP, VIPCOS (serverless),

SIP (STUN) Standard and serverless,

SNMP (optional),HTTP, TFTP

PCMA16 with 44,1kHz

CD-Quality mono

Bitrate: 705 kbps

G.711alaw, with 3,4 kHz

Telephone quality

64 kbps

G.711 alaw, 300 Hz

–

3400 Hz

(optional

μ law) PCM16, 75Hz

–

12.500Hz

PoE (Power over Ethernet) acc. to IEEE-Standard 802.3af

15W max.

-20 up to +70 °C

Housing dimensions 273 x 181

High-Density-ABS

RAL 7038, grey

2,3 kg

IP 66/67


Issued by W. Weber

Dated, 11.07.2014

Vonamic GmbH

All rights reserved


Technical description VIPCOS_rev9

Technical Description VIPCOS

V onamic IP Co mmunication S ystem

1 Changelist

2 Table of Contents

3 Introduction VIPCOS – The

onamic

mmunication

ystem

4 VIPCOS System components

Related manuals

Vonamic

703100

Optimus

TAS360VOIP/1M

Eurotops

Master 01

ULTIMATE SPEED

UOP 12 A1 - IAN 102790

ULTIMATE SPEED

UOP 12 A1

Commend

SIP Series VE

ULTIMATE SPEED

UOP 12 A1