Cisco Aironet 3600 Series Access Point Data Sheet

Data Sheet
Cisco Aironet 3600 Series Access Point
Cisco Aironet® 3600i Access Point
● Sleek design with internal antennas
● Ideal for office environments
Cisco Aironet 3600e Access Point
● Rugged metal housing and extended operating
temperature
● Ideal for factories, warehouses, and other
indoor industrial environments
● Versatile RF coverage with external antennas
● UL 2043 plenum-rated for above-ceiling
installation options or suspended from drop
ceilings
● Classify over 20 different types of interference,
including non-Wi-Fi interference within 5 to 30
seconds
● Automatic remedial action and less manual
intervention
Investment Protection with Modular
Architecture Design
● Flexible add-on Wireless Security & Spectrum
Intelligence Module
● IEEE 802.11ac Wave 1 Module
(Available Q1CY13)
● Cisco 3G Small Cell Module
(Available 2HCY13)
Troubleshooting Forensics for Faster
Interference Resolution and Proactive Action
● Historic interference information for back-intime analysis and faster problem solving
● 24/7 monitoring with remote access reduces
travel and speeds resolution
● Cisco® Spectrum Expert Connect provides realtime, raw spectrum data to help with difficult-todiagnose interference problems
● The Air Quality Index in Cisco CleanAir™
technology provides a snapshot of network
performance and the impact of interference
Robust Security and Policy Enforcement
● Industry’s first access point with non-Wi-Fi
detection for off-channel rogues
● Supports rogue access point detection and
detection of denial-of-service attacks
● Management frame protection detects
malicious users and alerts network
administrators
Delivering up to three times more coverage versus
competition for tablets, smartphones, and highperformance laptops, the industry’s only 4x4 MIMO,
three-spatial-stream access point delivers missioncritical reliability. Current solutions struggle to scale
to meet demands on the wireless networks from the
influx of diverse mobile devices and mobile
applications. The new Cisco Aironet® 3600 Series
sustains reliable connections at higher speeds
further from the access point than competing
solutions, resulting in up to three times more
availability of 450 Mbps rates, and optimizing the
performance of more mobile devices. Cisco® Aironet
3600 Series is an innovative, modular platform that
offers unparalleled investment protection with future
module expansion to support incoming 802.11ac
clients with 870 Mbps rates, or offer comprehensive
security and spectrum monitoring and control.
Cisco Aironet 3600 Series includes Cisco ClientLink 2.0 to boost
performance and range for clients and includes Cisco CleanAir
spectrum intelligence for a self-healing, self-optimizing network.
● Set policies to prohibit devices that interfere
with the Wi-Fi network or jeopardize network
security
Secure Interoperability
● Controller-based deployment only
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 8
RF Excellence
Building on the Cisco Aironet heritage of RF excellence, the 3600 Series is a flagship access point, delivering
industry-leading performance for secure and reliable wireless connections.
Enterprise-class silicon and optimized radios deliver a robust mobility experience which includes:
●
802.11n with 4x4 multiple-input multiple-output (MIMO) technology with three spatial streams, which
sustains 450-Mbps rates over a greater range for more capacity and reliability than competing access
points.
●
Cisco ClientLink 2.0 technology to improve downlink performance to all mobile devices including one-, two-,
and three-spatial-stream devices on 802.11n while improving battery life on mobile devices such as
smartphones and tablets.
●
Cisco CleanAir™ technology, which provides proactive, high-speed spectrum intelligence to combat
performance problems due to wireless interference.
●
Modular architecture design, enabling flexible add-on options in the form of a Wireless Security & Spectrum
Intelligence Module, a Cisco 3G Small Cell Module or an IEEE 802.11ac Module that is tightly integrated
with the Cisco Aironet 3600 Series Access Point platform, and is completely field-upgradable.
●
MIMO equalization optimized uplink performance and reliability by minimizing the impact of signal fade.
All of these features help ensure the best possible end-user experience on the wireless network.
Cisco also offers the industry’s broadest selection of 802.11n antennas delivering optimal coverage for a variety of
deployment scenarios.
Scalability
The Cisco Aironet 3600 Series is a component of the Cisco Unified Wireless Network, which can scale to up to
18,000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in
branch offices, and at remote sites. The Cisco Unified Wireless Network is the industry’s most flexible, resilient,
and scalable architecture, delivering secure access to mobility services and applications and offering the lowest
total cost of ownership and investment protection by integrating seamlessly with the existing wired network.
Product Specifications
Table 1 lists the product specifications for Cisco Aironet 3600 Series Access Points.
Table 1.
Product Specifications for Cisco Aironet 3600 Series Access Points
Item
Specification
Part Numbers
The Cisco Aironet 3600i Access Point: Indoor environments, with internal antennas
● AIR-CAP3602I-x-K9 - Dual-band controller-based 802.11a/g/n
● AIR-CAP3602I-xK910 - Eco-pack (dual-band 802.11a/g/n) 10 quantity access points
The Cisco Aironet 3600e Access Point: Indoor, challenging environments, with external antennas
● AIR-CAP3602E-x-K9 - Dual-band controller-based 802.11a/g/n
● AIR-CAP3602E-xK910 - Eco-pack (dual-band 802.11a/g/n) 10 quantity access points
Cisco SMARTnet® Service for the Cisco Aironet 3600i Access Point with internal antennas CON-SNT-CAP362Ix SMARTnet 8x5xNBD 3600i access point (dual-band 802.11 a/g/n)
● Qty(10) CON-SNT-CAP362Ix - SMARTnet 8x5xNBD 10 quantity eco-pack 3600i access point (dual-band 802.11a/g/n)
Cisco SMARTnet Service for the Cisco Aironet 3600e Access Point with external antennas
● CON-SNT-CAP3602x - SMARTnet 8x5xNBD 3600e access point (dual-band 802.11 a/g/n)
● Qty(10) CON-SNT-CAP3602x - SMARTnet 8x5xNBD 10 quantity eco-pack 3600e access point (dual-band
802.11a/g/n)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 8
Item
Specification
Cisco Wireless LAN Services
● AS-WLAN-CNSLT - Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT - Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT - Cisco Wireless LAN Performance and Security Assessment Service
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the
regulatory domain that corresponds to a particular country, visit: http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global
Price List.
Software
Cisco Unified Wireless Network Software Release 7.2 or later
● Cisco 2500 Series Wireless Controllers, Cisco Wireless LAN Controller Module (WLCM) on Cisco Services-Ready
Engine (SRE) for Cisco Integrated Services Router Generation 2 (ISR G2), Cisco Wireless Services Module 2
(WiSM2), Cisco 5500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controllers
Supported Wireless
LAN Controllers
Module Options
Wireless Security and Spectrum Intelligence module
● Provides full-spectrum, off-channel scanning for comprehensive wIPS, including Cisco CleanAir technology, rogue
detection, context awareness, and radio resource management (RRM) solutions. Scans 2.4- and 5-GHz channels while
serving data clients on the base dual-band access point platform
IEEE 802.11ac Wave 1 module (Available Q2CY13)
● Supports 3x3:3SS (spatial streams), 80-MHz wide channels, 256 quadrature amplitude modulation (QAM), and data
rates up to 1.3 Gbps (as part of IEEE 802.11ac Wave 1)
● Wi-Fi Alliance certification expected in Q2 2013
Cisco 3G Small Cell Module (Available 2HCY13)
● 3GPP Band 1 (2100 MHz), 16 users, Voice (R99), Packet Data (HSPA/HSDPA+)
● 4x4 multiple-input multiple-output (MIMO) with three spatial streams
802.11n Version 2.0
(and Related)
Capabilities
● Maximal ratio combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40-MHz with 5 Ghz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 dynamic frequency selection (DFS)
● Cyclic shift diversity (CSD) support
Data Rates
Supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz and 5 GHz):
MCS Index1
GI2 = 800ns
GI = 400ns
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65
135
7
65
135
72.2
150
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
1
MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation, the
coding rate, and data rate values.
2
GI: A guard interval (GI) between symbols helps receivers overcome the effects of multipath delays.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 8
Item
Frequency Band
and 20-MHz
Operating
Channels
Specification
12
78
162
86.7
180
13
104
216
115.6
240
14
117
243
130
270
15
130
270
144.4
300
16
19.5
40.5
21.7
45
17
39
81
43.3
90
18
58.5
121.5
65
135
19
78
162
86.7
180
20
117
243
130
270
21
156
324
173.3
360
22
175.5
364.5
195
405
23
195
405
216.7
450
A (A regulatory domain):
N (N regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz, 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
Q (Q regulatory domain):
● 5.745 to 5.825 GHz; 5 channels
● 2.412 to 2.472 GHz; 13 channels
C (C regulatory domain):
● 5.180 to 5.320 GHz; 8 channels
● 2.412 to 2.472 GHz; 13 channels
● 5.500 to 5.700 GHz; 11 channels
● 5.745 to 5.825 GHz; 5 channels
R (R regulatory domain):
E (E regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.180 to 5.320 GHz; 8 channels
● 5,660 to 5,805 GHz, 7 channels
● 5.500 to 5.700 GHz, 8 channels
(excludes 5.600 to 5.640 GHz)
S (S regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
I (I regulatory domain):
● 5.180 to 5.320 GHz; 8 channels
● 2.412 to 2.472 GHz, 13 channels
● 5.745 to 5.825 GHz; 5 channels
● 5.180 to 5.320 GHz; 8 channels
T (T regulatory domain):
K (K regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 2.412 to 2.472 GHz; 13 channels
● 5.280 to 5.320 GHz; 3 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.620 GHz, 7 channels
● 5.500 to 5.700 GHz, 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.805 GHz, 4 channels
● 5.745 to 5.825 GHz; 5 channels
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory
domain that corresponds to a particular country, visit: http://www.cisco.com/go/aironet/compliance.
Maximum Number
of Nonoverlapping
Channels
2.4 GHz
5 GHz
● 802.11b/g:
● 802.11a:
◦ 20 MHz: 3
◦ 20 MHz: 21
● 802.11n:
● 802.11n:
◦ 20 MHz: 3
◦ 20 MHz: 21
◦ 40 MHz: 9
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Receive Sensitivity
● 802.11b (CCK)
◦
◦
◦
◦
-101 dBm @ 1 Mb/s
-98 dBm @ 2 Mb/s
-92 dBm @ 5.5 Mb/s
-89 dBm @ 11 Mb/s
● 802.11g (non HT20)
◦
◦
◦
◦
◦
◦
◦
◦
-91 dBm @ 6 Mb/s
-91 dBm @ 9 Mb/s
-91 dBm @ 12 Mb/s
-90 dBm @ 18 Mb/s
-87 dBm @ 24 Mb/s
-85 dBm @ 36 Mb/s
-80 dBm @ 48 Mb/s
-79 dBm @ 54 Mb/s
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
● 802.11a (non HT20)
◦
◦
◦
◦
◦
◦
◦
◦
-90 dBm @ 6 Mb/s
-90 dBm @ 9 Mb/s
-90 dBm @ 12 Mb/s
-89 dBm @ 18 Mb/s
-86 dBm @ 24 Mb/s
-83 dBm @ 36 Mb/s
-78 dBm @ 48 Mb/s
-77 dBm @ 54 Mb/s
Page 4 of 8
Item
Specification
2.4-GHz
5-GHz
● 802.11n (HT20)
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
Maximum Transmit
Power
● 802.11n (HT20)
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
-90 dBm @ MCS0
-90 dBm @ MCS1
-90 dBm @ MCS2
-88 dBm @ MCS3
-85 dBm @ MCS4
-80 dBm @ MCS5
-78 dBm @ MCS6
-77 dBm @ MCS7
-90 dBm @ MCS8
-90 dBm @ MCS9
-89 dBm @ MCS10
-86 dBm @ MCS11
-82 dBm @ MCS12
-78 dBm @ MCS13
-77 dBm @ MCS14
-75 dBm @ MCS15
-90 dBm @ MCS16
-89 dBm @ MCS17
-87 dBm @ MCS18
-84 dBm @ MCS19
-81 dBm @ MCS20
-76 dBm @ MCS21
-75 dBm @ MCS22
-74 dBm @ MCS23
2.4 GHz
-91 dBm @ MCS0
-90 dBm @ MCS1
-89 dBm @ MCS2
-86 dBm @ MCS3
-83 dBm @ MCS4
-78 dBm @ MCS5
-77 dBm @ MCS6
-75 dBm @ MCS7
-91 dBm @ MCS8
-89 dBm @ MCS9
-87 dBm @ MCS10
-84 dBm @ MCS11
-80 dBm @ MCS12
-76 dBm @ MCS13
-75 dBm @ MCS14
-73 dBm @ MCS15
-90 dBm @ MCS16
-88 dBm @ MCS17
-85 dBm @ MCS18
-82 dBm @ MCS19
-79 dBm @ MCS20
-74 dBm @ MCS21
-73 dBm @ MCS22
-72 dBm @ MCS23
5-GHz
● 802.11n (HT40)
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
-88 dBm @ MCS0
-87 dBm @ MCS1
-86 dBm @ MCS2
-82 dBm @ MCS3
-80 dBm @ MCS4
-75 dBm @ MCS5
-73 dBm @ MCS6
-72 dBm @ MCS7
-88 dBm @ MCS8
-86 dBm @ MCS9
-84 dBm @ MCS10
-80 dBm @ MCS11
-77 dBm @ MCS12
-73 dBm @ MCS13
-71 dBm @ MCS14
-70 dBm @ MCS15
-87 dBm @ MCS16
-84 dBm @ MCS17
-82 dBm @ MCS18
-78 dBm @ MCS19
-75 dBm @ MCS20
-71 dBm @ MCS21
-69 dBm @ MCS22
-68 dBm @ MCS23
5 GHz
● 802.11b
● 802.11a
◦ 23 dBm: 4 antennas
◦ 23 dBm: 4 antennas
● 802.11g
● 802.11n (HT20)
◦ 23 dBm: 4 antennas
◦ 23 dBm: 4 antennas
● 802.11n (HT20)
● 802.11n (HT40)
◦ 23 dBm: 4 antennas
◦ 23 dBm: 4 antennas
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
Available Transmit
Power Settings
2.4 GHz
5 GHz
● 23 dBm (200 mW)
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
● 2 dBm (1.56 mW)
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
Integrated Antenna
● 2.4 GHz, Gain 2 dBi, internal omni, horizontal beamwidth 360°
● 5 GHz, Gain 5 dBi, internal omni, horizontal beamwidth 360°
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 8
Item
Specification
External Antenna
(Sold Separately)
● Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
Interfaces
● 10/100/1000BASE-T autosensing (RJ-45)
● Cisco offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of
deployment scenarios
● Management console port (RJ-45)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions
(W x L x H)
● Access point (without mounting bracket): 8.7 x 8.7 x 2.11 in. (22.1 x 22.1 x 5.4 cm)
Weight
Environmental
● 2.5 lbs (1.13 kg)
Cisco Aironet 3600i
● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
● Nonoperating (storage) Altitude Test -25˚C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating Altitude Test -40˚C, 9843 ft.
Cisco Aironet 3600e
● Nonoperating (storage) temperature: -22 to 158°F (-30 to 70°C)
● Nonoperating (storage) Altitude Test - 25˚C, 15,000 ft.
● Operating temperature: -4 to 131°F (-20 to 55°C)
● Operating humidity: 10 to 90 percent (noncondensing)
● Operating Altitude Test -40˚C, 9843 ft.
System Memory
● 256-MB DRAM
● 32-MB flash
Input Power
Requirements
Powering Options
● AP3600: 44 to 57 VDC
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
AP3600 without add-on module
● 802.3af Ethernet
● Cisco AP3600 Power Injectors (AIR-PWRINJ4=)
● Cisco AP3600 Local Power Supply (AIR-PWR-B=)
AP3600 with an add-on module
● Enhanced Power over Ethernet (PoE), 802.3at PoE+
● Cisco AP3600 Power Injectors (AIR-PWRINJ4=)
● Cisco AP3600 Local Power Supply (AIR-PWR-B=)
Power Draw
● AP3600: 12.95 W
Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by
some amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W,
bringing the total system power draw (access point + cabling) to 15.4W with PoE 802.3af as an example.
Warranty
Compliance
Standards
Limited Lifetime Hardware Warranty
◦
◦
◦
◦
◦
◦
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1
EN 60950-1
EN 50155
● Radio approvals:
◦
◦
◦
◦
◦
◦
◦
◦
◦
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
EMI and susceptibility (Class B)
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI (Japan)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 8
Item
Specification
◦ EN 301.489-1 and -17 (Europe)
◦ EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
● IEEE Standard:
◦ IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d
● Security:
◦ 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦ 802.1X
◦ Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
● EAP Type(s):
◦
◦
◦
◦
◦
◦
Extensible Authentication Protocol-Transport Layer Security (EAP-TLS)
EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
Protected EAP (PEAP) v0 or EAP-MSCHAPv2
Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST)
PEAPv1 or EAP-Generic Token Card (GTC)
EAP-Subscriber Identity Module (SIM)
● Multimedia:
◦ Wi-Fi Multimedia (WMM™)
● Other:
◦ FCC Bulletin OET-65C
◦ RSS-102
Limited Lifetime Hardware Warranty
The Cisco Aironet 3600 Series Access Point comes with a Limited Lifetime Warranty that provides full warranty
coverage of the hardware for as long as the original end user continues to own or use the product. The warranty
includes 10-day advance hardware replacement and ensures that software media is defect-free for 90 days. For
more details, visit: http://www.cisco.com/go/warranty.
Cisco Wireless LAN Services
Realize the full business value of your technology investments faster with intelligent, customized services from
Cisco and our partners. Backed by deep networking expertise and a broad ecosystem of partners, Cisco Wireless
LAN Services enable you to deploy a sound, scalable mobility network that enables rich media collaboration while
improving the operational efficiency gained from a converged wired and wireless network infrastructure based on
the Cisco Unified Wireless Network. Together with partners, we offer expert plan, build, and run services to
accelerate your transition to advanced mobility services while continuously optimizing the performance, reliability,
and security of that architecture after it is deployed. For more details, visit:
http://www.cisco.com/go/wirelesslanservices.
For More Information
For more information about the Cisco Aironet 3600 Series, visit http://www.cisco.com/go/wireless or contact your
local account representative.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 8
Printed in USA
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-686782-06
02/13
Page 8 of 8