AMS Device Manager 13.0 Installation guide
Reklama
Reklama
AMS Suite: Intelligent Device Manager
Installation Guide
Installation Guide
AW7030M01V130EN
August 2015
Disclaimer
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. This document is not to be redistributed without permission from Emerson Process Management.
Copyright and trademark information
© Emerson Process Management. 2015. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co.
AMS, PlantWeb ™ , SNAP-ON ™ , Asset Portal ™ , DeltaV ™ , RS3 ™ , PROVOX ™ , Ovation ™ , FIELDVUE ™ , and ValveLink ™ are marks of one of the Emerson group of companies.
FOUNDATION ™ , HART ® and WirelessHART ® are marks of the FieldComm Group of Austin, Texas, USA.
Intel ® and Intel ® Core ™ are registered trademarks, or trademarks of Intel Corporation in the U.S. and/or other countries.
Microsoft ® and Windows ® are registered trademarks of the Microsoft Corporation in the United States and/or other countries.
All other marks are property of their respective owners.
Document history
Part number
10P5824A001
10P5824A501
10P5824B101
10P5824C001
10P5824D001
10P5824D002
Date
Dec 2008
Apr 2009
Nov 2009
Apr 2010
Aug 2010
Jan 2011
Sep 2011
Nov 2012
Nov 2013
April 2015
August 2015
Description
Update, software version 10.0
Update, software version 10.1
Update, software version 10.5
Update, software version 11.0
Update, software version 11.1
Update, software version 11.1.1
Update, software version 11.5
Update, software version 12.0
Update, software version 12.5
Update, software version 13.0
Update, software version 13.0 Service Pack 1
License Agreement
Definitions: The term "You" includes, but is not limited to, users of the Fisher-Rosemount Systems, Inc. (FRSI) product embodied in the computer program herein, the user’s employer, the employer’s wholly owned subsidiaries, parent company, agents, employees, contractors, and subcontractors. The term "License Agreement" refers to one of FRSI’s License Agreements, including but not limited to, all Software License Agreements, accompanying FRSI products, all Beta Test Agreements, and all Master License
Agreements.
Any and all use of this product is subject to the terms and conditions of the applicable License Agreement. The terms and conditions of the applicable License Agreement by and between You and FRSI shall remain effective to govern the use of this product.
The existence of a License Agreement by and between You and FRSI must be confirmed prior to using this product. If the site at which this Program is used is a Licensed Facility under a Master License Agreement with FRSI, the applicable License Certificate that was sent to You applies. If the site at which this Program is used is NOT a Licensed Facility under a Master License Agreement with
FRSI and the use of the program is NOT governed by a Beta Test Agreement, the use of this Program shall be governed by the
Software License Agreement that is printed in the sales literature, on the package in which the program was delivered, and in this manual.
License Certificate for AMS Suite: Intelligent Device Manager
If the site at which this Program is used is a Licensed Facility under a Master License Agreement between You and Fisher-
Rosemount Systems, Inc., this Licensed Copy is provided for Licensee’s use pursuant to its Master License Agreement with FRSI
("Agreement") as modified herein. If this is an original Licensed Copy, it may be used only on the equipment with which it has been provided except as otherwise provided in the Agreement. If this is a Licensed Copy of a Revision or Upgrade, it may only be used in lieu of and under the same terms as the Licensed Copy previously provided to Licensee.
Notwithstanding provisions of the Agreement, the term of the Limited Warranty for this Licensed Copy is 90 days from the date of shipment from FRSI. Licensee’s other rights and obligations with respect to its use of this Licensed Copy are set forth in the
Agreement. Questions concerning Licensee’s rights and obligations should be directed to Project Operations, Emerson Process
Management, 1100 W Louis Henna Blvd, Round Rock, Texas 78681.
Software License Agreement for AMS Suite: Intelligent Device Manager
BY OPENING THIS PACKAGE YOU AGREE TO ACCEPT THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE WITH THESE TERMS,
YOU SHOULD PROMPTLY RETURN THE PACKAGE UNOPENED AND YOUR MONEY WILL BE REFUNDED. FRSI provides this computer program and related materials for your use. You assume responsibility for the acquisition of a machine and associated equipment compatible with the program, and for installation, use, and results obtained from the program.
LICENSE: FRSI grants to you a non-transferable, non-exclusive license to: (a) use all fully paid up licensed programs provided to you to run a single machine; (b) copy the program for backup or modification purposes in support of the program on the single machine. You must reproduce and include the copyright notice on any copy or modification. YOU MAY NOT REVERSE ENGINEER,
USE, COPY, OR MODIFY ANY PROGRAM OR RELATED MATERIALS OR ANY COPY, MODIFICATION, IN WHOLE OR IN PART, EXCEPT
AS EXPRESSLY PROVIDED FOR IN THIS LICENSE. IF YOU TRANSFER POSSESSION OF ANY COPY OR MODIFICATION OF THE
PROGRAM OR RELATED MATERIALS TO ANOTHER PARTY, YOUR LICENSE IS AUTOMATICALLY TERMINATED. No license, express or implied, is granted under any intellectual property directly or indirectly owned by FRSI which does not specifically read on the program as provided hereunder, nor shall any license, except the license specifically granted herein, be implied in law, implied in equity, or exist under the doctrine of patent exhaustion.
TITLE: Title to and ownership of the program and related materials shall at all times remain with FRSI or its licensors. Your right to use the same is at all times subject to the terms and condition of this Agreement. FRSI may, from time to time, revise or update the program and/or related materials and, in so doing, incurs no obligation to furnish such revisions or updates to you.
TERM: This license is effective upon opening this package. You may terminate it at any time by destroying the program and the related materials together with all copies and modifications in any form. It will also terminate upon conditions set forth elsewhere in this Agreement or if you fail to comply with any term or condition of this Agreement. You agree upon such termination to destroy the program and the related materials together with all copies and modification in any form.
LIMITED WARRANTY: FRSI warrants the media on which the program is furnished to be free from defects in materials and workmanship under normal use for a period of ninety (90) days from the date of delivery to you as evidenced by a copy of your invoice. However, FRSI does not warrant that the functions contained in the program will meet your requirements or that the operation of the program will be uninterrupted or error free. THE PROGRAM AND RELATED MATERIALS ARE PROVIDED "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU; SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY
SERVICING, REPAIR, OR CORRECTION.
LIMITATIONS OF REMEDIES: FRSI’s entire liability and your exclusive remedy shall be: (1) the replacement of any media not meeting
FRSI’s "Limited Warranty" and which is returned with a copy of your invoice to Fisher-Rosemount Systems, Inc., 1100 W Louis
Henna Blvd, Round Rock, Texas 78681, USA, or (2) if FRSI is unable to deliver replacement media which is free of defects in materials or workmanship, you may terminate this Agreement by returning the program and your money will be refunded. IN NO
EVENT WILL FRSI BE LIABLE TO YOU FOR ANY DAMAGES ARISING OUT OF ANY CAUSES WHATSOEVER (WHETHER SUCH CAUSES BE
BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT, PATENT INFRINGEMENT, OR OTHERWISE), INCLUDING ANY
LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE SUCH PROGRAM EVEN IF FRSI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR OF ANY CLAIM BY ANY OTHER
PARTY.
GOVERNING LAW: This Agreement, and all matters concerning its construction, interpretation, performance, or validity, shall be governed by the laws of the State of Texas.
EXPORT RESTRICTIONS: Licensee shall comply fully with all laws, regulations, decrees, and orders of the United States of America that restrict or prohibit the exportation (or reexportation) of technical data and/or the direct product of it to other countries, including, without limitation, the U.S. Export Administration Regulations.
U.S. GOVERNMENT RIGHTS: The programs and related materials are provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the U.S. Government is subject to restrictions set forth in the Federal Acquisition Regulations and its Supplements.
THE PROGRAM IS NOT FOR USE IN ANY NUCLEAR AND RELATED APPLICATIONS. You accept the program with the foregoing understanding and agree to indemnify and hold harmless FRSI from any claims, losses, suits, judgements and damages, including incidental and consequential damages, arising from such use, whether the cause of action be based in tort, contract or otherwise, including allegations that FRSI’s liability is based on negligence or strict liability.
To the extent that a third party owns and has licensed to FRSI any portion of the program, such third party owner shall be a beneficiary of this Agreement, and shall have the right to enforce its rights under this Agreement independently of FRSI.
GENERAL: You may not sublicense, assign, or transfer the license or the program and related materials without the prior written consent of FRSI. Any attempt otherwise to sublicense, assign, or transfer any of the rights, duties, or obligations hereunder without such consent is void.
Should you have any question concerning this Agreement, please contact your FRSI representative or sales office.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND
CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN US
WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, EXCEPT THE MASTER LICENSE AGREEMENT, ORAL OR WRITTEN, AND
ANY OTHER COMMUNICATIONS BETWEEN US RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. YOU AGREE THAT FRSI
MAY AUDIT YOUR FACILITY TO CONFIRM COMPLIANCE OF THE FOREGOING PROVISIONS.
Contents
Contents
i
Contents ii
1
Introduction
Introduction
About this guide
This AMS Suite: Intelligent Device Manager Installation Guide contains the following information:
•
Chapter 1 , Introduction – Provides an overview of AMS Device Manager installation
and directs you to the appropriate procedures for installing AMS Device Manager for your setup and circumstances.
•
Chapter 2 , System requirements – Lists the system requirements for AMS Device
Manager, including hardware, software, and security requirements. This chapter also defines additional requirements for system interface networks.
•
Chapter 3 , Install AMS Device Manager – Describes the procedures for installing AMS
Device Manager. This chapter also details AMS Device Manager installation on a
DeltaV or Ovation network.
•
Chapter 4 , Before using AMS Device Manager – Describes configuration steps
needed before using AMS Device Manager.
•
Chapter 5 , Troubleshoot installation errors – Provides troubleshooting steps you can
take if you have problems installing AMS Device Manager.
Before you begin
To install and use AMS Device Manager software effectively, you should be familiar with the basic functions and operation of:
• Microsoft Windows
• Your local area network (LAN) configuration and security
• Your communication devices and field devices
• Network components installed on your system
You should also be aware of:
•
AMS Device Manager system requirements (see page 9
)
• Database backup procedures (see
•
Database restore procedures (see page 4
)
NOTICE
Do not use the Windows compress feature on the PC drive where AMS Device Manager is installed. AMS Device Manager will be unable to open your database information.
Reinstallation of AMS Device Manager will be required.
1
2
Introduction
Installation overviews
The following overviews direct you to specific information and procedures required for your type of installation.
Install a standalone AMS Device Manager system
A standalone AMS Device Manager system is a Server Plus Station that maintains the AMS
Device Manager database, with no associated Client SC Stations.
1.
on page 1.
2.
Confirm that your system meets AMS Device Manager requirements on
3.
Do one of the following:
• For a new installation, follow the Server Plus Station installation steps on
• For upgrading from AMS Device Manager 11.0 or later, see
Install a distributed AMS Device Manager system
A distributed AMS Device Manager system is a client/server deployment of AMS Device
Manager Stations. It allows multiple AMS Device Manager Stations access to a common database and all connected devices in the distributed system.
1.
on page 1.
2.
Confirm that your system meets AMS Device Manager requirements on
3.
Do one of the following:
• For a new installation, follow the Server Plus Station and Client SC Station installation steps on
• For upgrading from AMS Device Manager 11.0 or later, see
Install AMS Device Manager on a DeltaV system
1.
on page 1.
2.
Confirm that your system meets minimum requirements for a co-deployment (refer to the documentation provided with your DeltaV system).
3.
Follow the installation steps on
Install AMS Device Manager on an Ovation system
1.
on page 1.
2.
Confirm that your system meets minimum requirements for a co-deployment (refer to the documentation provided with your Ovation system).
3.
Follow the installation steps on
Introduction
For Windows 8.1 users
If you are installing AMS Device Manager on a Windows 8.1 PC, substitute the Windows 8.1
process for the procedures in this guide.
For example, when an installation guide step reads:
1.
Stop AMS Device Manager Servers (Start > All Programs > AMS Device Manager >
Terminate Servers ).
Substitute it with a Windows 8.1 operation such as:
1.
Stop AMS Device Manager Servers (on the Start screen, enter TER and click the
Terminate Servers tile).
Windows 8.1 touchscreen functionality is also supported in AMS Device Manager 13.0.
Refer to your Windows 8.1 documentation for additional information.
Database operations
The following database procedures are essential to successfully install or upgrade to AMS
Device Manager 13.0:
•
Back up a database on page 3 – Do this procedure before upgrading to AMS
Device Manager 13.0.
•
Restore a database on page 4 – Do this procedure after upgrading AMS Device
Manager from version 10.x or earlier.
•
Change the SQL Server system administrator ('sa') account password on page 4 – Do
this procedure after installing AMS Device Manager 13.0 and SQL Server 2012.
•
Install a full version of SQL Server 2012 on page 40 – Do this procedure if your
database size (see
page 17 ) requires a full installation of SQL Server 2012.
Back up a database
Note
If performing a database backup on a Windows 7/Windows 2008 Server or Windows 8.1/Windows
2012 Server PC with User Account Control enabled, log in with a Windows administrator user to avoid multiple error messages.
1.
Select Start > All Programs > AMS Device Manager > Database Utilities > Database Backup.
2.
In the Backup Database dialog, type or select the name of the backup file. Save the backup file in a secure location on your local drive outside the AMS folder.
3.
Click Save.
4.
Run Database Verify Repair to check the database for duplicate, missing, and corrupt records (select Start > All Programs > AMS Device Manager > Database Utilities >
Database Verify Repair ).
3
4
Introduction
Notes
For a very large database, the Verify/Repair operation can take a long time.
5.
Do one of the following:
• If Database Verify Repair does not return any errors, repeat steps 1 to 3.
• If Database Verify Repair returns any errors, run Database Verify Repair until there are no more errors and repeat steps 1 to 3.
Restore a database
Notes
• If you are restoring a database that was created on a different PC and you want to retain the
Device Monitor List and Alert Monitor alerts, before you restore the database on the new station, ensure that the names of the PC and system interfaces configured on the new station are the same as the original station.
•
•
If performing a database restore on a Windows 7/Windows 2008 Server or Windows 8.1/
Windows 2012 Server PC with User Account Control enabled, log in with a Windows administrator user to avoid multiple error messages.
Ensure your Windows user has System > Database Utilities > Restore Database permission in AMS
Device Manager User Manager. See AMS Device Manager Books Online for more information.
1.
Close AMS Device Manager and any related applications (for example, Alert Monitor,
Server Plus Connect), if open.
2.
Stop all database connections.
3.
Stop AMS Device Manager Servers (Start > All Programs > AMS Device Manager >
Terminate Servers ).
4.
If the database backup file is located on a network drive, copy it to a local drive.
5.
Select Start > All Programs > AMS Device Manager > Database Utilities > Database Restore.
6.
Select the database backup file you want to restore and click Open.
Change the SQL Server system administrator ('sa') account password
Notes
•
•
Install all AMS Device Manager stations first before changing the SQL Server 'sa' account password.
You can also change the SQL Server 'sa' account password using SQL Server Management
Studio (refer to your SQL Server documentation).
1.
Click Start > Run from the Windows taskbar.
2.
In the text box, type CMD and press Enter to open the command prompt.
3.
At the command prompt, type:
Introduction
C:\AMS\bin\AMSDbLogin -sa <oldpassword> <newpassword>
Where:
• C is the drive letter where AMS Device Manager is installed
• <oldpassword> is the default (42Emerson42Eme) or other current SQL password
• <newpassword> is the password you want to use
4.
Press ENTER.
You should see the message "The SA password in SQL has been changed from
oldpassword to newpassword."
5.
Close the command prompt.
Note
Your local Windows security policies may prevent you from changing the SQL Server ‘sa’ account password again until a predetermined length of time has elapsed.
Uninstall AMS Device Manager
You must uninstall AMS Device Manager if you are upgrading from any versions lower than
11.0. You do not need to uninstall the current AMS Device Manager software if you are upgrading from version 11.0 or higher.
Note
If you have SNAP-ON applications or an AMS Suite Calibration Connector application installed, uninstall them before uninstalling AMS Device Manager. If your applications use an external database, you must back up that database before you uninstall the application (if you want to keep the data).
1.
Back up the database (see page 3
).
2.
Save your license.dat file in a location outside the AMS folder.
3.
Stop AMS Device Manager Servers (Start > All Programs > AMS Device Manager >
Terminate Servers ).
4.
Open the Windows Control Panel and use Programs and Features to remove AMS
Device Manager.
Reference documents
After AMS Device Manager is installed, the following user information tools are available to you by selecting Start > All Programs > AMS Device Manager > Help:
• AMS Device Manager Books Online
• AMS Suite: Intelligent Device Manager Installation Guide
• Work Processes Guide
5
6
Introduction
• Release Notes
These files are copied to your PC during AMS Device Manager installation.
AMS Device Manager Books Online
AMS Device Manager Books Online provides detailed reference and procedural information for using AMS Device Manager. AMS Device Manager Books Online explains the features and functions of AMS Device Manager. You should become familiar with AMS Device
Manager Books Online and refer to it regularly as you use AMS Device Manager.
You can access AMS Device Manager Books Online in two ways:
• Click the Help menu on the AMS Device Manager toolbar and select AMS Device
Manager Books Online .
Click Start > All Programs > AMS Device Manager > Help > Books Online.
•
Use the Contents, Index, or Search tab in the left pane to locate specific topics. You can save shortcuts to frequently used topics and access them on the Favorites tab.
What’s This? Help
You can get help for device parameters on most AMS Device Manager supported devices by clicking and then clicking on a field. The help is displayed in a window that you can dismiss by simply clicking anywhere on the screen. This help is provided by the device manufacturer and can also be viewed by clicking in a field and pressing the F1 key.
Electronic documentation
Two user documents are placed on your station when AMS Device Manager is installed.
These documents are available as Portable Document Format (PDF) files, and include the
AMS Suite: Intelligent Device Manager Installation Guide and the Work Processes Guide.
You need Adobe Reader to view these files. If you do not have a compatible version of
Adobe Reader on your PC already, you can download Adobe Reader from www.adobe.com.
To access an electronic document after Adobe Reader is installed, click Start > All Programs >
AMS Device Manager > Help > <document> from the Windows taskbar.
Release Notes
The Release Notes provide the most up-to-date information about the current release of
AMS Device Manager, including supported devices, compatibility issues, and known discrepancies and workarounds.
The Release Notes are provided in text (.TXT) format. You can access the Release Notes in two ways:
• Click Start > All Programs > AMS Device Manager > Help > Release Notes
Introduction
• Double-click the RELNOTES.TXT file located in the AMS folder after installation or on the AMS Device Manager DVD1
We recommend that you read the Release Notes before using AMS Device Manager.
Device manuals
Many device manufacturers provide manuals for their devices in PDF format. Run the
AMS_PDF_Installer utility to copy relevant manuals to your hard drive. The utility is located in the Device Documentation Installer folder on the AMS Device Manager DVD 2.
After installing device manuals, you access them in AMS Device Manager by right-clicking a device and selecting Help from the context menu. If a device manual is available, it opens in Adobe Reader. If no manual exists for the selected device, AMS Device Manager Books
Online opens. To see a list of device manuals installed on your station, select Help > Device from the AMS Device Manager toolbar. Double-click a device to open the associated manual.
7
Introduction
8
2
System requirements
System requirements
Each PC in your system must meet minimum software and hardware requirements to ensure successful installation and operation of AMS Device Manager. System interface networks and SNAP-ON applications may have additional requirements.
Hardware requirements
9
System requirements
PC processing speed, memory, and disk space
Station Type
Server Plus
Station
Client SC
Station
Minimum Requirements:AMS Device
Manager only
Intel ® Core ™ 2 Quad processor, 2 GHz or greater
3 GB or more of memory 1
2 GB or more of free hard disk space 2, 3, 4, 5
Intel ® Core ™ 2 Quad processor, 2.4 GHz or greater
2 GB or more of memory 1
2 GB or more of free hard disk space 2, 3, 4, 5
Minimum Requirements: AMS Device Manager with AMS Suite APM 6
Intel ® Core ™
or AMS Asset Portal 7
2 Quad processor, 3 GHz or greater
3 GB or more of memory 1
4 GB or more of free hard disk space 2, 3, 4, 5
N/A
Notes
1 Set virtual memory to 2-3 times the size of the physical memory.
2 The recommended free hard disk space is the amount needed for AMS Device Manager installation, not the amount needed for daily operation (there are no recommended minimum amounts for daily operation). If you receive a message during installation that you do not have enough hard disk space, free up as much space as possible and then retry the installation.
3 Additional hard disk space is required for migrating the database if you are upgrading from an earlier version of AMS
Device Manager. The amount of space required depends on the size of the existing database.
4 Additional space may be required on the Server Plus Station for the database, depending on the size of your database.
5 Additional hard disk space is required for SNAP-ON applications.
6 The AMS Suite APM Client Framework can be installed on an AMS Device Manager 13.0 station that meets the requirements above. Other components of AMS Suite APM must be installed on additional non-AMS Device Manager
PCs.
7 If you use AMS Asset Portal version 3.2, for optimal performance, it should be installed on a non-AMS Device Manager
PC. If you choose to co-deploy with AMS Device Manager, the PC must meet the requirements above.
Serial interfaces
• An RS-232 serial interface is required for a serial HART multiplexer network or documenting calibrator.
• A serial port with a dedicated interrupt is required for a serial HART modem.
• The use of serial ports on VMWare and Hyper-V virtual PCs is NOT supported.
USB interfaces
•
•
A USB port and USB HART modem drivers are required to use a USB HART modem.
See the Release Notes for a list of supported modems.
A USB port and USB Fieldbus Interface drivers are required to use the USB Fieldbus
Interface.
10
System requirements
• A USB port is required to connect a 375 or 475 Field Communicator using a USB
Infrared Data Association (IrDA) adapter. In some cases, IrDA drivers may be necessary. See the Release Notes for a list of supported adapters.
• A USB port is required to connect a 475 Field Communicator or Bluetooth modem using a USB Bluetooth adapter. Only Microsoft Bluetooth components are supported (see the Release Notes for more information).
• A USB port and drivers are required to connect Fluke 753 and Fluke 754
Documenting Process Calibrators.
11
System requirements
Network requirements
• AMS Device Manager is designed to operate on an Ethernet network running TCP/IP.
• Mobile AMS Device Manager stations are allowed to connect wirelessly using wireless plant network technology. Some communications slowdown can be expected with wireless networking.
• AMS Device Manager supports deployment within a single domain or workgroup or across multiple domains or workgroups. For more information, refer to KBA
NA-0800-0113. The Microsoft Windows Management Instrumentation and
Workstation services must be running on the PC during installation.
•
•
AMS Device Manager does not support deployment between a network workgroup and a network domain.
Named IP services (how PCs identify each other on a network) must be functioning correctly for stations in an AMS Device Manager distributed system to communicate.
•
•
All stations must be connected to the network before beginning AMS Device
Manager installation. This ensures that all stations can access the AMS Device
Manager database. All stations’ computer names should be recorded (see
).
All stations’ PC clocks must be synchronized (many third-party tools are available for this purpose). Clock synchronization is important because the date and time of an event recorded in the database is based on the clock in the PC that generated that event.
For information about working with network firewalls, see
Note
Consult with your IT department about security issues and any other network operation issues or special requirements for your network.
12
Software requirements
System requirements
13
System requirements
Operating systems
AMS Device Manager supports the following Windows operating systems:
Operating System
Windows 7
Windows 7
Windows Server 2008
Windows Server 2008
Windows Server 2008 R2
Windows Server 2008 R2
Windows 8.1
Windows 8.1
Windows Server 2012
Windows Server 2012
Version
Professional Service Pack 1 1
Enterprise Service Pack 1 1,3
Standard Service Pack 2 1,4
Enterprise Service Pack 2 1,4
Standard Service Pack 1 2,3
Enterprise Service Pack 1 2,3
Professional 1
Enterprise 1
Standard 2
Datacenter 2
Notes
1 32-bit and 64-bit versions of the operating systems are supported.
2 Only 64-bit versions of the operating systems are supported.
3 Supported with DeltaV in their virtualized environment (64-bit versions only).
4 The Windows Server 2008 read-only domain controller is not supported.
• Desktops, laptops, and tablets with touchscreens are supported on Windows 8.1 Professional only.
• AMS Device Manager and associated SNAP-ON applications may not be 64-bit applications but will be able to run on a 64-bit OS with full functionality.
• Intermixing of operating system families is not supported. You can use combinations of Windows 7 and Server 2008
PCs; Windows 8.1 and Server 2012 PCs. No other combinations are supported.
• A Server operating system (Windows Server 2008/2012) and server-class PC (for example, Dell PowerEdge) are recommended if the database is expected to be greater than 10 GB due to the SQL Server version required (see
); or if AMS Device Manager is installed on a DeltaV ProfessionalPLUS Station, Application Station, or
Maintenance Station and Batch Historian or VCAT will be used. Contact your hardware vendor for recommendations on server-class PCs and server operating systems.
• The correct operating system service pack (SP) must be installed on your PC before installing AMS Device Manager.
If your PC does not have the correct SP installed, or you are unsure, contact your network administrator.
• See
Change Windows Firewall settings
on page 61 for additional operating system configuration considerations.
• AMS Device Manager is supported on a Hyper-V virtual PC only when co-deployed with DeltaV on the same operating systems supported in non-virtualized environments.
• AMS Device Manager is supported on a VMWare virtual PC.
• AMS Device Manager also supports localized versions of the listed operating systems.
14
System requirements
Support for Remote Desktop Services
Remote Desktop Services (also known as Terminal Services) is a component of Microsoft
Windows (both server and client versions) that allows you to access applications and data on a remote computer over a network, even from a client computer that is running an earlier version of Windows. To use AMS Device Manager 13.0 in a Remote Desktop
Services environment you must:
• Set up Remote Desktop Services before AMS Device Manager installation.
• Limit the use of Remote Desktop Services to 5 concurrent sessions when AMS
Device Manager is installed on Windows server-class computers.
• Ensure that Remote Desktop Services is NOT set to Relaxed Security.
Notes
• Do not attempt to install AMS Device Manager in a Remote Desktop Services session; this is not a supported installation method and may produce undesirable results.
•
•
If multiple users are running AMS Device Manager in a Remote Desktop session, and one of the users runs Terminate Servers, the AMS Device Manager application and AMS Device
Manager Servers shut down for all users.
In a Remote Desktop Services environment, SNAP-ON applications may be limited to only one session at any given time.
Contact Microsoft for Remote Desktop Services licensing information. Questions about
AMS Device Manager licensing requirements should be directed to your Emerson Process
Management Sales/Service Office.
Web browser
AMS Device Manager requires Microsoft Internet Explorer version 8.0 or later. If you do not have a supported version of Internet Explorer, contact your IT department for assistance.
AMS Device Manager Web Services
AMS Device Manager Web Services provide the ability to import AMS Device Manager data, in XML format, into business applications such as Microsoft Excel. In addition,
Computerized Maintenance Management Systems (CMMS) and Enterprise Resource
Planning (ERP) systems can use AMS Device Manager Web Services to retrieve data from
AMS Device Manager.
Microsoft Internet Information Services (IIS) and AMS Device Manager 13.0 Server Plus
Station software must be installed on your system before you can install AMS Device
Manager Web Services. AMS Device Manager Web Services is not supported on Client SC
Stations. If you do not have IIS installed, contact your IT department for assistance.
Notes
• Some control systems do not allow IIS to be installed on the same PC. Check your control system documentation to determine IIS compatibility.
15
System requirements
•
•
If you want to install AMS Device Manager Web Services on a DeltaV station, it must be a
DeltaV Application or ProfessionalPLUS station.
You need local administrator permission to install AMS Device Manager Web Services.
AMS Device Manager Web Services and AMS Asset Portal 3.2
AMS Asset Portal acquires device data as it is connecting to AMS Device Manager Web
Services. To use AMS Device Manager Web Services with AMS Asset Portal for devices, the following requirements must be met:
• AMS Device Manager Server Plus Station software must be installed on the PC.
• Microsoft Internet Information Services (IIS) must be installed on the PC before installing AMS Device Manager Web Services. Use the Windows Add or Remove
Programs and Add/Remove Windows Components functions to install IIS (see the
Windows operating system documentation or Windows Help for more information).
• The Data Provider Web Service is required to use AMS Asset Portal. The URL to find the Web Service is: http://<PCname>/amsdevicemanagerws/ amsdataproviderservice.asmx
AMS Suite: Asset Performance Management
The AMS Suite APM Client Framework can be installed on an AMS Device Manager 13.0
station. Other components of AMS Suite APM must be installed on additional non-AMS
Device Manager PCs.
Microsoft IIS must be installed and configured on the PC before installing AMS Suite APM.
To enable the SQL reporting service in AMS Suite APM, the following IIS features must to be added to the IIS defaults (if you are unsure how to do this, contact your IT department):
•
•
•
•
•
•
ASP.NET
NET Extensibility
Request Filtering
ISAPI
ISAPI Extensions
IIS 6 Management Compatibility
For more information about AMS Suite APM, contact your Emerson Process Management
Sales/Service Office.
.NET Framework
AMS Device Manager 13.0 requires and installs Microsoft .NET Framework 4.5.2, 4.0, and
3.5 Service Pack 1. Microsoft .NET Framework 3.5 SP1 is a cumulative update that includes the following versions:
• 2.0
• 2.0 SP2
16
System requirements
• 3.0
• 3.0 SP2
• 3.5
Database
AMS Device Manager 13.0 uses a named instance, Emerson2012, of SQL Server 2012 for its database. The default 'sa' account password for this named instance is
42Emerson42Eme. The size of your database determines which edition of SQL Server 2012 you must use:
• If your database is less than 10 GB, you can use SQL Server 2012 Express. The AMS
Device Manager 13.0 setup installs this version automatically.
• If your database is greater than 10 GB or will be at some future time, we recommended that you install a full version of SQL Server 2012 Service Pack 1 before you install AMS Device Manager.
• If the AMS Device Manager system will support more than 3000 AMS Tags, use the
User Configuration Reports tool, or have more than 10 AMS Device Manager stations (including AMS Suite APM), a full version of SQL Server 2012 Service Pack 1 is recommended regardless of database size.
A full version of SQL Server 2012 Service Pack 1 must be purchased separately (if you do not already have it). We recommended that the full version of SQL Server 2012 Service
Pack 1 is installed on a server operating system. To install a full version of SQL Server 2012,
.
Notes
• Contact Microsoft for more information about appropriate licensing for a full installation of
SQL Server 2012.
• The AMS Device Manager database must be located in the AMS\DB folder on a local partition of the AMS Device Manager Server Plus Station. Any other location is not supported.
The AMS Device Manager installation program installs SQL Server on your PC as follows:
• If SQL Server 2012 is not installed, the AMS Device Manager 13.0 installation program will install SQL Server 2012 Express and create an Emerson2012 named instance with a default 'sa' account password of 42Emerson42Eme.
• If an instance of SQL Server 2012 is installed, but not the Emerson2012 named instance, the AMS Device Manager 13.0 installation program will create the
Emerson2012 named instance with a default 'sa' account password of
42Emerson42Eme.
• If the SQL Server 2012 Emerson2012 named instance is already installed, the AMS
Device Manager 13.0 installation program will continue with the next part of the installation program. Access to the SQL Server system administrator (‘sa’) account is required. If you do not have access, contact your network administrator for more information.
17
System requirements
• If you have previously installed a full version of SQL Server 2012 Service Pack 1, you should create the SQL Server Emerson2012 named instance before installing AMS
Device Manager 13.0 (refer to your SQL Server documentation). Otherwise, the AMS
Device Manager installation will install SQL Server 2012 Express.
A Microsoft SQL Server 'sa' account password is required for AMS Device Manager 13.0
operation. Therefore, the AMS Device Manager setup creates a default password
(42Emerson42Eme) for the Emerson2012 named instance. For security reasons, it is recommended that you change the default SQL Server password (see
Drawings and Notes
The following applications are supported for Drawings and Notes:
•
•
•
Microsoft Word 2007, 2010, and 2013
Microsoft Excel 2007, 2010, and 2013
WordPad
Note
All stations in a distributed system must use the same application and version for entering Drawings/
Notes.
Windows security requirements
AMS Device Manager installation
Installation of AMS Device Manager 13.0 has these security requirements:
• You need Windows system administrator rights to install and configure AMS Device
Manager .
• If you are installing AMS Device Manager on a PC that has the correct version of SQL
Server and the Emerson2012 named instance (see
page 17 ), you need to know the
SQL Server ‘sa’ account password, if a password other than the default
(42Emerson42Eme) has been set.
Other network security requirements may also apply to the installation. Contact your network administrator for more information.
AMS Device Manager users
During installation, the AMSDeviceManager Windows user group is created and given access to the AMS folder, subfolders, and files. When an administrator adds specific
Windows users in the AMS Device Manager User Manager utility (see
), these users are automatically added to the AMSDeviceManager Windows user group. However, they may not be able to use all AMS Device Manager features until permissions are assigned to them in User Manager.
18
System requirements
The installation creates a share of the AMS folder. It also allows connected Client SC
Stations to use the Drawings/Notes feature of AMS Device Manager. If your situation makes this security configuration undesirable, consult your operating system documentation or your system administrator.
AmsServiceUser
A Windows user account called AmsServiceUser is automatically created on each AMS
Device Manager station and added to the Users Windows user group. The AmsServiceUser account is not created if it exists on the domain controller where AMS Device Manager stations belong to. The local or domain AmsServiceUser accounts is also added to the
AMSDeviceManager Windows user group on all AMS Device Manager stations during installation.
Note
If you are installing an AMS Device Manager distributed system on domain controller PCs or a mix of domain controllers and non-domain controller PCs, do all the domain controller installations first
This user account runs the AMS Device Manager Servers. If your AMS Device Manager system is located on a network that requires periodic changing of passwords, the
AmsServiceUser account password can be changed using the AMSPasswordUtility.exe utility from the AMS\Bin folder on each AMS Device Manager station. You should only run the utility after all AMS Device Manager stations have been installed. Do not use the Windows
User Accounts or AMS User Manager to modify this user, or change this password as AMS
Device Manager will no longer function.
Note
If the AMS Suite Calibration Connector application (see
page 57 ) is installed when you change the
password for the AmsServiceUser, you must also change the password for
AmsCalibrationConnectorWS properties. This requires a change in the Windows Services console of your workstation. If you are unsure how to do this, contact your IT department.
Requirements for system interfaces
Requirements for system interfaces are in addition to the hardware and software requirements for AMS Device Manager.
HART modems
HART modems let AMS Device Manager communicate with HART devices using a PC serial port, PC USB port, or Bluetooth connectivity. Serial and USB HART modems attach directly to a PC or laptop computer. Bluetooth HART modems require a self-contained power source (AAA batteries) as well as a Bluetooth-ready workstation PC. The PC can have
Bluetooth capability built-in or use a Bluetooth adapter and Microsoft Bluetooth software components. HART modems are not supported with USB to RS-232 converters or with
Ethernet converters.
19
System requirements
You must configure AMS Device Manager to send and receive data to and from the PC serial communications port or USB port (USB HART modem software is required). If a
Bluetooth HART modem is used, you must prepare the PC for its use. Contact your IT department for assistance. HART modems also allow multidropping up to 16 HART devices.
Notes
•
•
If your USB or Bluetooth HART modem manufacturer provided supporting driver software, install it before configuring the modem for use with AMS Device Manager.
Bluetooth is not natively supported on Windows 2008 or 2012.
Field Communicators
The 475 and 375 Field Communicators are portable, handheld communicators from
Emerson Process Management used in the field or in the shop to configure, test, and diagnose HART and FOUNDATION fieldbus devices. For information on using the 475 or
375, see the Field Communicator User's Manual.
The Field Communicator Interface is a licensable option that lets you use a Field
Communicator and AMS Device Manager together to transfer HART and FOUNDATION fieldbus data. The 475 communicates with an AMS Device Manager station using a USB
IrDA adapter (ordered separately) or the Microsoft Windows Bluetooth interface on a
Bluetooth-enabled PC. The 375 communicates with an AMS Device Manager station using a USB IrDA adapter (ordered separately). You can communicate with only one Field
Communicator at a time on a PC. Communication between AMS Device Manager and a connected Field Communicator is initiated by the AMS Device Manager software.
Documenting calibrators
With the optional Calibration Assistant SNAP-ON application, a documenting calibrator can be used to automate the collection of device calibration data.
When the documenting calibrator is connected to AMS Device Manager, test definitions can be checked out (downloaded) to the calibrator. The calibrator is then attached to the corresponding field device, tests are run, and data is collected. This data can then be checked in (uploaded) to AMS Device Manager for electronic record keeping and report generation.
See the Release Notes for a list of supported documenting calibrators and pertinent information about individual calibrators. See the AMS Device Manager Supported Device List to determine if a device supports calibration.
8000 BIM
The 8000 BIM System Interface displays HART field devices connected to an 8000 BIM system.
The physical connection between your AMS Device Manager PC and the 8000 BIM system requires one of the following:
20
System requirements
• A serial connection using an RS-485 converter (BIM)
• An Ethernet connection using TCP/IP addressing (eBIM)
Supported analog input modules:
• 8101-HI-TX — 4-20mA, 8 channel, Div. 2/2
• 8201-HI-IS — 4-20mA, 8 channel, Div. 2/1
• 8301-HI-IS — 4-20mA, 8 channel, Div. 1/1
Supported analog output modules:
• 8102-HO-IP — 4-20mA, 8 channel, Div. 2/2
• 8202-HO-IS — 4-20mA, 8 channel, Div. 2/1
• 8302-HO-IS — 4-20mA, 8 channel, Div. 1/1
ABB
The ABB System Interface lets you use AMS Device Manager to view and configure HART devices connected to I/O modules supported by the ABB System 800xA control system.
AMS Device Manager Client SC Station or Server Plus Station software can be installed on an ABB Station if PC hardware and software requirements are met, or on a separate PC. The
ABB Station must have the 800xA station software installed and configured for AMS Device
Manager to communicate with HART instruments connected using the ABB Controller.
The ABB System Interface requires:
•
•
• That the ABB Network is licensed in AMS Device Manager.
•
•
That the ABB Station software version is 5.1 along with the “Performance Pack” enhancement release from ABB.
That the ABB communications certificate be manually installed. See
ABBSystemInterface-Readme.pdf
inside the SNAP-ONS And Tools\ABB HPT Certificate folder on the AMS Device Manager DVD 1 for installation instructions.
• The AMS Device Manager user must be the same as the ABB user on the station that runs the "ABB HART Pass Through Service".
Use of the AC 800M series controllers.
Use of supported multiplexers, including:
Pepperl+Fuchs KFD2-HMM-16
MTL4840
Elcon Series 2700-G
21
System requirements
DeltaV
A DeltaV control network is an isolated Ethernet local area network (LAN) that provides communication between the controllers and the stations. It uses one or more Ethernet hubs for communication.
DeltaV System Interface station software requirements:
• AMS Device Manager 13.0 can be installed on the following DeltaV 11.3, 11.3.1,
12.3, 12.3.1, 13.3 stations:
DeltaV Workstations
ProfessionalPLUS Station
AMS Device Manager Station Type
Server Plus Station or Client SC Station
ProfessionalPLUS as Remote Client Server Server Plus Station or Client SC Station
Local Application Station Server Plus Station or Client SC Station
Remote Application Station Server Plus Station or Client SC Station
Local "Operate" Station
Professional
Operator
Base
Maintenance
Server Plus Station or Client SC Station
Operator Station as Remote Client Server Client SC Station only
Remote "Operate" Station
Professional
Operator
Base
Client SC Station only
• The DeltaV System Interface must be configured on a licensed AMS Device Manager station that is on the DeltaV network.
• AMS Device Manager supports DeltaV version 11.3 and later in co-deployed installations only.
• Supported HART I/O hardware and software revisions:
Analog Input HART Module, 8-channel, Series 1, Revision 2.21 or higher
Analog Input HART Module, 8-channel, Series 2, Revision 1.26 or higher
Analog Input HART Module, 16-channel, Revision 1.17 or higher
Analog Output HART Module, Series 1, Revision 2.25 or higher
Analog Output HART Module, Series 2, Revision 1.26 or higher
•
HART AI 8 Channel Card, S-Series, Revision 1.26 or higher
HART AI 16 Channel Card, S-Series, Revision 1.17 or higher
HART AO Card, S-Series, Revision 1.26 or higher
HART AI Redundant High Density, S-Series, Revision 1.0 or higher
HART AO Redundant High Density, S-Series, Revision 1.0 or higher
Supported Intrinsically Safe HART I/O hardware and software revisions:
22
System requirements
Analog Input HART Module, 8-channel, Revision 2.39 or higher
Analog Output HART Module, 8-channel, Revision 2.00 or higher
• Supported Zone I/O hardware and software revision:
Analog Input or Analog Output, Revision 1.14 or higher
• Supported FOUNDATION fieldbus I/O hardware and software revision:
•
Fieldbus H1, Series 1, Revision 1.8 or higher (does not support fieldbus alerts)
Fieldbus H1, Series 2, Revision 2.2 or higher
Fieldbus H1, S-Series Integrated Power, Revision 4.87 or higher
Fieldbus H1, S-Series, Revision 2.2 or higher
Fieldbus H1, S-Series, 4-port, Revision 1.0 or higher
Supported CHARM I/O hardware and software revision:
CHARM I/O Carrier (CIOC), Revision 11.3.1 or higher
AI 4-20 mA HART CHARM, Revision 1.18 or higher
•
•
•
•
AO 4-20 mA HART CHARM, Revision 1.18 or higher
AI 4-20 mA HART (Intrinsically Safe) IS, Revision 1.74
AO 4-20 mA HART (Intrinsically Safe) IS, Revision 1.76
Supported Safety Instrumented System (SIS) CHARM I/O hardware and software revision:
CHARMs Logic Solver (CSLS), Revision 1.1 or higher
LS AI 4-20 mA HART CHARM, Revision 1.15 or higher
LS AI 4-20 mA HART (Intrinsically Safe) CHARM, Revision 1.15 or higher
LS DVC HART DTA CHARM, Revision 1.16 or higher
LS DVC HART (Redundant DTA) CHARM, Revision 1.16 or higher
Supported PROFIBUS DPV1 I/O hardware and software revision:
PROFIBUS Series 2+, Revision 1.36 or higher
PROFIBUS S-Series, Revision 1.36 or higher
Supported Wireless I/O:
Wireless I/O card (WIOC), Revision 11.3.1 or higher
Smart Wireless Gateway, Revision 3.95 or higher
Security – The DeltaV password (if not using the default password) must be entered in the AMS Device Manager Network Configuration utility (see Add a DeltaV network in AMS Device Manager Books Online).
DeltaV supports:
•
•
•
•
FOUNDATION fieldbus devices
Wired HART Rev. 5, Rev. 6, and Rev. 7 devices
WirelessHART Rev. 7 devices
PROFIBUS DPV1 devices
23
System requirements
•
•
• PROFIBUS PA devices (supported on DeltaV 11.3 or higher with an S-Series
PROFIBUS DP I/O card and a PROFIBUS DP/PA Coupler on a PROFIBUS DP segment.
See Release Notes for supported couplers.)
HART safety devices connected to DeltaV SIS logic solvers
HART safety devices connected to DeltaV 12.3 (SIS) CHARMs logic solvers
DeltaV versions 11.3 and later can access devices connected to RS3 and PROVOX I/O systems through the DeltaV Interface for RS3 I/O and DeltaV Interface for PROVOX I/O, respectively. The devices are displayed in the DeltaV network hierarchy in AMS Device
Manager. For installation and setup information, refer to the DeltaV Books Online.
To receive alerts from devices connected to PROVOX and RS3 Migration Controllers in your
DeltaV network hierarchy, you must run a utility to properly set the DeltaV alert capability
).
The AMS ValveLink SNAP-ON application is supported for DeltaV and PROVOX I/O cards, but not for RS3 cards. See
The DeltaV System Interface supports AMS ValveLink Diagnostics. Analog output modules configured for HART are required on the DeltaV substation for communication with HART
FIELDVUE digital valve controllers. FOUNDATION fieldbus FIELDVUE digital valve controllers need only be commissioned and ports downloaded.
Det-Tronics
The Det-Tronics System Interface is used to monitor fire and gas detectors on the Det-
Tronics Eagle Quantum Premier (EQP) fire and gas safety system.
The Det-Tronics System Interface requires that you install the Det-Tronics Safety System
Software application (version 8.6.0.1) before configuring the system interface. You must install the Det-Tronics EQP application before configuring the system interface.
The Det-Tronics System Interface supports alerts for devices if the following are true:
• AMS Device Manager Server is running on the station where the Det-Tronics network is connected.
• The device has been previously identified.
• The device is in the Device Monitor List.
FF HSE
The FF HSE System Interface lets you use AMS Device Manager to configure and view alerts for FOUNDATION fieldbus devices connected to FOUNDATION fieldbus linking devices.
The FF HSE System interface requires:
• One or more (up to 64) commissioned FF HSE Linking Devices that conform to the
FOUNDATION fieldbus HSE and H1 specifications (for a list of supported linking devices, see the Release Notes). The Remote Operations Controller for FOUNDATION
24
System requirements fieldbus (ROC FF) and the ControlWave linking devices are displayed in AMS Device
Manager in the FF HSE hierarchy. For setup and configuration of ROC FF and
ControlWave linking devices, see the documentation supplied with them.
•
•
•
Note
All linking devices on the same network must have unique tag names. If duplicate tag names are used, the hierarchy will not build properly.
Commissioning using the device manufacturer’s commissioning/decommissioning utility.
Configuring FF HSE Linking Devices with unique TCP/IP addresses.
An AMS Device Manager station with 1 or 2 Ethernet network interface cards (NIC).
A NIC dedicated to the FF HSE segment is recommended to reduce the amount of competing network communications.
NOTICE
If you have an Ovation System Interface installed, use the network interface card IP address of the FF HSE Server for the FF HSE System Interface.
HART Multiplexer Network
The HART Multiplexer System Interface lets you use AMS Device Manager to communicate with HART devices through a HART multiplexer. HART multiplexers can link many installed
HART field devices to an AMS Device Manager station, providing the capability to remotely configure, troubleshoot, and monitor those devices. A typical HART multiplexer network enables one PC COM port to communicate with up to 63 addressable HART multiplexers.
AMS Device Manager supports a variety of multiplexers, each with different capabilities and requirements. Supported multiplexer types can have between 32 and 256 device connections.
A HART multiplexer network requires:
• One serial communication port for each HART multiplexer network.
• An RS-232 to RS-485 converter or a supported Ethernet serial hub (see the Release
Notes for supported models).
• Multiplexers or I/O modules of the following types:
Arcom
Elcon
8000 BIM
Pepperl+Fuchs
Spectrum Controls I/O (this is an I/O module that connects to an Allen-Bradley
Programmable Logic Controller, it displays as a multiplexer in AMS Device
Manager)
25
System requirements
For a list of supported multiplexers and additional requirements for specific types of multiplexers see the Release Notes. For specific information about a supported multiplexer, see the manufacturer’s documentation. For more information about multiplexer networks, see KBA NA-0400-0084.
HART Over PROFIBUS
The HART Over PROFIBUS System Interface lets you use AMS Device Manager to view and configure HART devices that are connected to PROFIBUS remote I/O subsystems via the
Softing Ethernet PROFIBUS Interface (xEPI) PROFIBUS Gateway. The interface addresses the gateway by either its DNS or IP address.
Note
Before upgrading to AMS Device Manager 13.0 from previous versions supporting HART Over
PROFIBUS, contact your Emerson Process Management Sales/Service Office to ensure your system is fully supported. Additional testing may be required.
The HART Over PROFIBUS System Interface requires that:
•
•
AMS Device Manager is installed on a PC running a supported operating system.
A control system that supports PROFIBUS DPV1 is configured and operational.
• At least one Softing PROFIBUS Gateway for communications is configured and the current version of the T+H AMS Device Manager Communications Components
(TACC) software is installed.
• At least one PROFIBUS DP remote I/O subsystem that supports HART communications is connected to the control system. Contact your Emerson Process
Management Sales/Service Office for a list of supported I/O subsystems.
• At least one HART I/O module is installed in the remote I/O subsystem. See the
Release Notes for a list of supported HART I/O modules.
• At least one HART instrument is present on a module channel.
See the TH AMS Device Manager Communication Components HART Over PROFIBUS User
Guide downloaded from Softing for more information.
Kongsberg
The Kongsberg System Interface lets you use AMS Device Manager to communicate with
HART devices using I/O modules supported by the Kongsberg Maritime System. The
Kongsberg Network communicates with HART devices using the Kongsberg Automation
Server which is an application with a Web Service interface.
The Kongsberg System Interface is deployed where there is access to the Kongsberg
Automation Server with IIS. Install the Kongsberg Automation Server on an AMS Device
Manager station for best communication performance.
If you install additional Kongsberg System Interfaces, each must be linked to unique
Kongsberg Automation Server URLs. The Kongsberg System Interface supports communications with HART instruments connected to STAHL ISPac HART Multiplexers and
STAHL PROFIBUS DP Remote I/O modules for HART.
26
System requirements
The Kongsberg System Interface requires that:
• The version of the Kongsberg Control System is AIM v8.3.
• The Kongsberg System is set up and the Automation Server is accessible from the
AMS Device Manager station.
• The URL for the Kongsberg Automation Server is known.
• One or more Remote Control Units (RCUs) are available on the Kongsberg Network where PROFIBUS Masters or HART Masters may be configured.
PROFIBUS Masters allow the connection of HART DP Slave and I/O Modules, which connect HART instruments to the network.
HART Masters allow the connection of HART Multiplexers, which connect HART instruments to the network.
OpenEnterprise
The OpenEnterprise System Interface lets you use AMS Device Manager to view and configure wired HART and WirelessHART devices connected to an OpenEnterprise SCADA
System and associated Remote Terminal Unit (RTU) controllers (that is, ROC800 series,
FloBloss 107, and ControlWave).
The OpenEnterprise System Interface requires that:
•
•
Service Pack 1 for AMS Device Manager 13.0 is installed.
The version of OpenEnterprise Server is 3.2 or higher.
• The OpenEnterprise Server is installed on an AMS Device Manager 13.0 PC or on a network-accessible PC. If the OpenEnterprise Server is on a different PC, you must install an OpenEnterprise OPC Alarms & Events instance on the AMS Device Manager station with an OpenEnterprise System Interface in order to get device alerts.
• Only one OpenEnterprise System Interface is allowed for each AMS Device Manager station.
Note
The OpenEnterprise System Interface cannot be installed on an AMS Device Manager station with a
DeltaV System Interface.
Ovation
The Ovation System Interface lets AMS Device Manager communicate with HART,
FOUNDATION fieldbus, PROFIBUS DPV1, and WirelessHART devices through an existing
Ovation network. The Ovation network communicates with devices through one or more
Ovation controllers. HART devices communicate with the Ovation controller through I/O modules specifically designed to communicate with HART equipment. FOUNDATION fieldbus devices communicate with the Ovation controller through I/O modules designed to communicate with FOUNDATION fieldbus devices. PROFIBUS DPV1 devices communicate using I/O modules designed for PROFIBUS. WirelessHART devices
27
System requirements communicate through the Smart Wireless Gateway. Device information is passed through the Ovation controller to a Windows-based Ovation Station from which AMS Device
Manager accesses device data.
FOUNDATION fieldbus device commissioning and decommissioning is accomplished through the Ovation fieldbus engineering software used by the Ovation system. AMS
Device Manager is not part of this process. A FOUNDATION fieldbus device must be commissioned before AMS Device Manager can communicate with it.
AMS Device Manager 13.0 can be deployed with Ovation as a standalone or co-deployed system.
Ovation System Interface station software requirements:
• AMS Device Manager 13.0 can be installed on the following Ovation 3.4, 3.5, and
3.5.1 stations:
Ovation workstations
Operator Station
Database Server
AMS Device Manager station
Server Plus Station or Client SC Station
Client SC Station
Note
If you install AMS Device Manager and configure an Ovation System Interface on a PC that is not an Ovation Station and try to access HART devices, performance will be significantly affected if the host file on the AMS Device Manager station is missing specific entries. To improve performance, add the IP address and hostname for each configured Ovation Safety
Data Server to the C:\WINDOWS\SYSTEM32\DRIVERS\ETC\HOSTS file on the AMS Device
Manager Station.
• If you have FOUNDATION fieldbus devices, we recommended that a licensed AMS
Device Manager Client SC Station be installed on the Ovation Database Server (see
).
For device support, you can configure AMS Device Manager with an Ovation system as follows:
• For HART devices:
If you want to access HART devices on your Ovation system, AMS Device
Manager Server Plus Station software and the Ovation System Interface can be installed on any Ovation Station or on a standalone PC.
•
AMS Device Manager supports burst mode messages from HART devices on
Ovation Stations using analog output card 5X000167 only.
For FOUNDATION fieldbus devices:
For Ovation 3.4, the AMS Device Manager Server Plus Station must be codeployed on any Ovation Station with the Ovation fieldbus engineering software installed. Configure the Ovation System Interface on this station.
28
System requirements
For Ovation 3.5 and later, a licensed Client SC Station must be installed on the
Ovation Database Server. Configure the AMS Device Manager Ovation System
Interface with FOUNDATION fieldbus selected on the Ovation Database server to take advantage of the Ovation HSE Server. The AMS Device Manager Server Plus
Station can be co-deployed on an Ovation Operator Station but not on the
Ovation Database Server.
To receive FOUNDATION fieldbus device alerts in AMS Device Manager, the
Ovation OPC Alarm and Event Server package must be installed on your codeployed Ovation/AMS Device Manager station. The AMS Device Manager
Ovation System Interface must also be installed on this station.
Note
Some FOUNDATION fieldbus devices have a feature known as “reannunciation” (or
“multibit”). This feature must be disabled for devices on an Ovation 3.5 system so that AMS
Device Manager can receive alerts from these devices. This feature is typically enabled/ disabled in the AMS Device Manager device Configure/Setup properties screens (the exact location varies by device).
• For WirelessHART devices:
If you want to access information for WirelessHART devices on an Ovation system, configure an Ovation System Interface in AMS Device Manager with
WirelessHART support enabled and a connection to a Smart Wireless Gateway configured.
• For PROFIBUS DPV1 devices:
If you want to access information for PROFIBUS DPV1 devices on an Ovation 3.4
or later system, configure an Ovation System Interface in AMS Device Manager with PROFIBUS DP support enabled.
•
PROFIBUS DPV1 devices will only be supported on Ovation 3.4 or later networks.
A PROFIBUS DP module can contain up to 2 ports. Each port can be connected to up to 124 PROFIBUS DPV1 devices.
For SIS devices:
If you want to access SIS HART device information on your Ovation system through AMS Device Manager, AMS Device Manager can be configured on an
Ovation Station or on a non-Ovation Station. Use the AMS Device Manager
Network Configuration utility to set up an Ovation System Interface.
Each Ovation controller uses a unique TCP/IP address. AMS Device Manager communicates with HART devices, WirelessHART devices, FOUNDATION fieldbus devices, and devices connected to Ovation Safety Instrumented System (SIS) logic solvers through I/O modules contained in the Ovation controller chassis, or in remote nodes connected to the Ovation controller.
• Supported HART I/O hardware:
Analog Input, 5X00058/5X00059, Version 9 or higher
Analog Input High Performance, 5X00106/5X00109, Version 6 or higher
Analog Output, 5X00062/5X00063, Version 8 or higher
Analog Output High Performance, 5X00167, Version 1 or higher
29
System requirements
• Supported FOUNDATION fieldbus I/O:
Gateway 5X00151G01 and H1 Series 2 Module 5X00152G01, Version 1 or higher
•
Module 5X00301 with cavity insert 1X00458H01 or Module 5X00301 with
Personality Module 5X00327, Version 1 or higher (two each of 5X00301 and
5X00327 may also be configured to provide redundancy)
Supported Intrinsically Safe controller:
Ovation SIS Logic Solver, KJ2201X1-PW1, Version 1 or higher
•
•
Supported PROFIBUS DP I/O (Ovation 3.4 and later, with the correct Ovation patch):
PROFIBUS module 5X00300/5X00321, Version 1 or higher (two each of 5X00300 and 5X00321 may also be configured to provide redundancy)
Supported Wireless Gateway (Ovation 3.4 and later) with Smart WirelessHART adapter (Ovation 3.4 and later):
1X00693H01 through 1X00693H04
PROFIBUS
The PROFIBUS System Interface lets you use AMS Device Manager to view and configure
PROFIBUS DPV1 or PROFIBUS PA devices connected to a Softing PROFIBUS Ethernet
Gateway or a Softing PROFlusb Modem.
The PROFIBUS System Interface requires:
• For Ethernet connections, a Softing FG-100 or FG-300 Ethernet Gateway. The
FG-100 supports one PROFIBUS segment while the FG-300 supports up to 3
PROFIBUS DP segments. Each PROFIBUS DP segment can support up to 32 devices.
• For modem connections, a Softing PROFlusb Modem. It can be used as a master in a
PROFIBUS segment.
•
•
Softing PROFIBUS drivers and API version 5.4x must be installed on the PC that will use Softing PROFIBUS interface hardware.
To allow application programs to use the Softing PROFlusb Modem, it must first be configured using Softing's Driver Configuration utility.
• To allow application programs to use the FG Series/PROFlgate Gateways, each bus channel must first be configured and scanned using Softing's Driver Configuration utility.
• Ensure that you have installed and configured the Softing device drivers before configuring the PROFIBUS System Interface.
• For connections using the PROFIBUS Ethernet Gateway, only one DNS name or IP address can be configured for each PROFIBUS Network.
PROVOX
A PROVOX system controls field devices linked together by a communication network called a highway. All communicating PROVOX field devices, including the SRx Controller
Family products, are connected to this network.
30
System requirements
Field devices are grouped into communication highways in the PROVOX Data Highway or
PROVOX Highway II. Both systems are multi-drop, half-duplex type. A traffic controller supervises the communication on a PROVOX Data Highway; a token-passing technique controls communication on a PROVOX Highway II.
The PROVOX System Interface requires:
• I/O type (inputs)–CL6822, CL6825, or CL6827
• I/O type (outputs)–CL6826 (will only support standard HART messaging, it will not support AMS ValveLink Diagnostics); CL6828, P3.1 or greater (will support standard
HART messaging and AMS ValveLink Diagnostics)
• Controller options–SR90 P5.4 with I/O Driver P5.5 or higher or SRx P5.5 or higher
• System software options–OWP with P1.2 or higher, PROVUE P5.5 or higher, and
ENVOX 3.4 or higher; I/O must be configured as “digital” or “hybrid”
• Dedicated HDL with Ethernet connection (TCP/IP) to AMS Device Manager PC
RS3
A Rosemount System 3 (RS3) system controls field devices linked together through
Controller cards connected to a PeerWay through ControlFiles. A PeerWay can accommodate up to 32 system devices, called nodes, to allow each control system device to communicate through the PeerWay and the RS3 Network Interface (RNI).
The RS3 System Interface requires:
• I/O hardware–FIC 4.8 or higher I/O cards with smart daughterboard and boot revision supplied with P1R1.4 or MAIO FIM with 2.6 or higher
• Controller hardware–MPC II Controller Processor or higher, CP-IV Coordinator
Processor or higher
• System software–P1R3.4 or higher with controller image P1.10 or higher
• Dedicated RNI–The RNI needs to be either version 4.1 (NT) or version 5.0 (XP or
Server 2003/2008). A single RNI will support multiple AMS Device Manager connections.
Note
AMS Device Manager and RS3 Operator Station (ROS), or DeltaV Operate for RS3 (DOR) cannot be installed on the same PC.
Siemens
The Siemens System Interface lets you use AMS Device Manager to communicate with
HART devices on a Siemens PCS 7 Control Network. An AMS Device Manager Server Plus
Station or Client SC Station must be installed on the same station as the Siemens PCS 7
ES/MS Station.
The Siemens System Interface requires that:
• The Siemens Network is licensed.
31
System requirements
• A Siemens System v7 with SP1 or higher is installed on the ES/MS Station and the
DeviceCom interface is accessible from AMS Device Manager.
• Siemens PCS 7 project file is copied from the live system.
STAHL
A STAHL HART System Interface supports STAHL systems that communicate with HART field devices. AMS Device Manager can read and write device information through existing plant wiring by communicating with multiple devices through the STAHL network. Various
STAHL systems can coexist on a single STAHL network.
The STAHL HART System Interface requires:
• RS-232/RS-485 converter for each network (see the Release Notes for supported models)
• STAHL ICS Module–9148 Multiplexer Module installed on a 9161 Module Board with up to 16 HART Transmitter Supply Units (module 9103)
• I.S.1 System–Central Unit Module 9440, Multiplexer Module 9461 (HART analog input) or 9466 (HART analog output)
• IS PAC 9192 HART multiplexer
Note
You may not be able to use AMS Device Manager to communicate with HART devices through a
STAHL IS PAC multiplexer at the same time a handheld communicator is communicating with the device loop. Consult your STAHL representative for details.
The ICS Module is a single HART multiplexer that supports HART transmitter supply units connected to field devices. The I.S.1 System routes messages to their multiplexers with attached HART field devices. For additional information on supported STAHL equipment, see the Release Notes and the manufacturer’s documentation.
Wireless
The Wireless System Interface allows you to view and configure WirelessHART devices in a
Wireless Network. A Wireless Network is made up of one or more wireless gateways and
WirelessHART devices.
The Wireless System Interface requires:
• An Ethernet adapter to connect to the gateway.
• One or more wireless gateways that allow communication between the AMS Device
Manager station and a collection of wireless devices.
• WirelessHART devices. See the AMS Device Manager Supported Device List for a list of supported WirelessHART devices. The Supported Device List can be accessed after
Supported Device List installation is complete (select Start > All Programs > AMS Device
Manager > Help > Supported Device List).
32
System requirements
• A valid SSL certificate (if using the recommended Security Setup utility) allowing the
AMS Device Manager station to securely communicate with the gateway. See AMS
Device Manager Books Online and the Smart Wireless Gateway manual for more information about the Security Setup utility and certificate.
33
System requirements
34
3
Install AMS Device Manager
Install AMS Device Manager
AMS Device Manager can be installed as a single-station system or as a multi-station, distributed system. The single-station system is a Server Plus Station that maintains the
AMS Device Manager database, with no associated Client SC Stations. A distributed AMS
Device Manager system is a client/server deployment of AMS Device Manager Stations. It allows multiple AMS Device Manager Stations access to a common database and all connected devices in the distributed system.
A distributed system contains a Server Plus Station and one or more Client SC Stations.
Each station has access to a common database located on the Server Plus Station.
The procedures in this chapter are for installing and configuring AMS Device Manager on the following types of stations:
•
•
Server Plus Station
Client SC Station
For a distributed system to function as intended, all Client SC Stations must have network access to the Server Plus Station. The Server Plus Station must be able to successfully ping each Client SC Station by computer name. You can install a Client SC Station first if that is required for your network configuration (for example, if installing on domain controllers and non-domain controllers). Otherwise, it is recommended that AMS Device Manager software be installed first on the PC to be the Server Plus Station (see
on each PC to be used as a Client SC Station (see
page 43 ). All stations must use the same
revision of AMS Device Manager software.
If you are installing an AMS Device Manager distributed system on domain controller PCs or a mix of domain controllers and non-domain controller PCs, do all the domain controller installations first (see
).
If you are installing AMS Device Manager on a DeltaV station, see
If you are installing AMS Device Manager on an Ovation station, see page 56 .
If you are installing an AMS Device Manager distributed system and the Server Plus Station is separated from the Client SC Station(s) by a firewall, refer to KBA NA-0400-0046.
If you are installing AMS Device Manager on a PC that has AMS Wireless Configurator installed, see
35
Install AMS Device Manager
Upgrade an AMS Device Manager system
When you upgrade to a new version of AMS Device Manager, the installation process overwrites all existing files located in the AMS folder (except the database files and license files).
CAUTION!
Before you upgrade, you should back up your database as a precaution against loss of data (see
).
The backup files are not changed during installation. In the unlikely event that database files are damaged or altered in some way, you can use the backup files to restore the database.
Upgrading to AMS Device Manager 13.0 from version 11.0 and higher does not require you to uninstall previous versions and restore the database after installation. See
page 37 for the steps to follow based on your current and desired setup for AMS Device
Manager 13.0.
Upgrading to AMS Device Manager 13.0 from version 10.x or lower requires you back up the database and uninstall the previous version. If you have version 10.x or lower, see
on page 39.
36
Install AMS Device Manager
Table 3-1: Upgrade from AMS Device Manager 11.0 or higher
Desired AMS Device Manager 13.0 Setup
Current Setup Server Plus Station
Server Plus Station 1. Check in all calibration routes.
2. Back up the database (see page 3
).
3. Consolidate existing databases, if necessary
(see
).
4. Uninstall SNAP-ON applications, if installed 2 .
5. Uninstall AMS Suite Calibration Connector application, if installed.
6. Uninstall Softing TACC components, if installed (refer to TACC guides downloaded from Softing).
7. Remove any configured HART Over
PROFIBUS System Interfaces.
8. Stop any programs or processes that access
AMS Device Manager Server 1 .
9. Stop AMS Asset Portal Data Collection or AMS
Suite APM, if running.
10. Stop AMS Device Manager Server in system tray if running.
11. Install Server Plus Station software (see
).
12. Get new license codes, if required (see
).
) or edit (see
) users.
14. Reapply the DeltaV System Interface 4 , if applicable.
15. Install required SNAP-ON applications (see
) 2 .
16. Install AMS Suite Calibration Connector application, if applicable.
17. Install new Softing TACC components, if applicable 3 .
18. Configure HART Over PROFIBUS System
Interfaces, if applicable 3, 5 .
19. Install the latest version of Web Services, if required (see
).
20. Copy device manuals (see
21. If you plan to continue using AMS Asset
Portal, restart Data Collection, but if you have purchased AMS Suite APM, contact PlantWeb
Services for assistance.
Client SC Station
1. Check in all calibration routes.
2. Uninstall SNAP-ON applications, if installed 2 .
3. Uninstall AMS Suite Calibration Connector application, if installed.
4. Uninstall Softing TACC components, if installed (refer to TACC guides downloaded from Softing).
5. Remove any configured HART Over
PROFIBUS System Interfaces.
6. Stop any programs or processes that access AMS Device Manager Server 1 .
7. Stop AMS Device Manager Server in system tray if running.
8. Uninstall previous AMS Device Manager
Server software (see
9. Install Client SC Station software (see
).
10. Install required SNAP-ON applications (see
) 2 .
) or edit (see
users.
12. Configure required communication interfaces 5 .
13. Install new Softing TACC components, if applicable 3 .
14. Configure HART Over PROFIBUS System
Interfaces, if applicable 3, 5 .
15. Copy device manuals (see page 7
).
37
Install AMS Device Manager
Table 3-1: Upgrade from AMS Device Manager 11.0 or higher (continued)
Current Setup
Client SC Station
Desired AMS Device Manager 13.0 Setup
Server Plus Station
1. Check in all calibration routes.
2. Back up the database (see page 3
).
3. Uninstall SNAP-ON applications, if installed 2 .
4. Uninstall Softing TACC components, if installed (refer to TACC guides downloaded from Softing).
5. Remove any configured HART Over
PROFIBUS System Interfaces.
6. Stop any programs or processes that access
AMS Device Manager Server 1 .
7. Stop AMS Device Manager Server in system tray if running.
8. Uninstall previous AMS Device Manager
Server software (see
9. Install Server Plus Station software (see
).
10. Get new license codes, if required (see
).
) or edit (see
) users.
12. Configure required communication interfaces 4 .
13. Install required SNAP-ON applications (see
) 2 .
14. Install AMS Suite Calibration Connector
application, if applicable (see page 58
).
15. Install new Softing TACC components, if applicable 3 .
16. Configure HART Over PROFIBUS System
Interfaces, if applicable 3, 5 .
17. Install latest version of Web Services, if required (see
).
18. Copy device manuals (see
19. If you plan to continue using AMS Asset
Portal, restart Data Collection, but if you have purchased AMS Suite APM, contact PlantWeb
Services for assistance.
Client SC Station
1. Uninstall SNAP-ON applications, if installed 2 .
2. Uninstall Softing TACC components, if installed (refer to TACC guides downloaded from Softing).
3. Remove any configured HART Over
PROFIBUS System Interfaces.
4. Stop any programs or processes that access AMS Device Manager Server 1 .
5. Stop AMS Device Manager Server in system tray if running.
6. Install Client SC Station software (see
).
) or edit (see
users.
8. Reapply the DeltaV System Interface, if applicable 4 .
9. Install required SNAP-ON applications (see
) 2 .
10. Install new Softing TACC components, if applicable 3 .
11. Configure HART Over PROFIBUS System
Interfaces, if applicable 3, 5 .
12. Copy device manuals (see page 7
).
38
Install AMS Device Manager
Notes
1 Processes that must be stopped in Windows Task Manager before upgrading include:
• AMSPlantServer
• AMSFileServer
• AMSConnectionServer
• AMSOPC
• AMSGenericExports
• AMSFFServer
• AmsFFAtDeviceBroker
• AMSLicenseServer
• AmsDeviceAlertServer
• AmsHseServer
• AMSDevTypeRemote
• AMSPBServer
2 SNAP-ON applications must be uninstalled before installing the latest version.
3 If you intend to use the HART Over PROFIBUS System Interface, after upgrading AMS Device Manager Server you must reinstall the Softing TACC components whether or not you install new components.
4 The DeltaV System Interface requires that you re-apply the interface after upgrading AMS Device Manager. To do this, in the Network Configuration utility, display the properties of the DeltaV System Interface, click OK, and then click Close.
5 Refer to the procedure in AMS Device Manager Books Online.
Manually installed Device Descriptions that are still not included in the AMS Device Manager 13.0 installation must be reinstalled after the upgrade.
Table 3-2: Upgrade from AMS Device Manager 10.x or lower
Upgrade from version 7.x, 8.x, 9.x, or 10.x
1. Back up the database (see page 3
).
2. Uninstall SNAP-ON applications, if installed 2 .
3. Uninstall AMS Device Manager 7.x, 8.x, 9.x, or 10.x (see
4. Ensure the PC meets system requirements (see
).
5. Install AMS Device Manager 13.0 (see page 42
, depending on the type of installation needed).
6. Install required SNAP-ON applications (see
1 .
7. Restore your database (see page 4
).
Notes
1 SNAP-ON applications must be uninstalled before installing the latest version.
If you are upgrading from a version lower than 7.x, contact your Emerson Process Management Sales/Service Office for assistance.
After you have completed the upgrade, configure any required system interface networks and then open AMS Device Manager 13.0. Right-click each of the network icons and select
Rebuild Hierarchy followed by Scan > New Devices. If you are using the Alert Monitor feature, click Alert Monitor on the AMS Device Manager toolbar to open the Alert List. Click Station
Monitoring on the toolbar and ensure that the station you are monitoring is checked.
39
Install AMS Device Manager
Upgrade from AMS Wireless Configurator
To install an AMS Device Manager Server Plus Station or Client SC Station on a PC that has
AMS Wireless Configurator installed:
1.
Contact your Emerson Process Management Sales/Service Office to get new license codes for AMS Device Manager.
2.
Back up the database (see page 3
).
3.
Stop AMS Device Manager Servers (Start > All Programs > AMS Device Manager >
Terminate Servers ).
4.
Open the Windows Control Panel and use Programs and Features to remove AMS
Wireless Configurator.
5.
Install AMS Device Manager (see Install Server Plus Station software on page 42 or
Install Client SC Station software on page 43).
6.
Do one of the following:
• If you installed a Server Plus Station in step 3, license AMS Device Manager (see
page 44 ) and restore your backed-up database (see
).
• If you installed a Client SC Station in step 3, you may need to consolidate your backed-up AMS Wireless Configurator database with an existing database (see
Upgrade from AMS Device Configurator
AMS Device Configurator is a limited-feature version of AMS Device Manager provided to
DeltaV users, and does not require a license. To upgrade to the full version of AMS Device
Manager:
1.
Contact your Emerson Process Management Sales/Service Office to get new license codes for AMS Device Manager.
2.
Stop AMS Device Manager Servers (Start > All Programs > AMS Device Manager >
Terminate Servers ).
3.
License AMS Device Manager (see page 44
).
4.
Restart your PC.
5.
Start AMS Device Manager.
Install a full version of SQL Server 2012
A full version of Microsoft SQL Server 2012 Service Pack 1, Standard or Enterprise edition is required based on the scenarios listed on
. It is recommended that you install SQL
Server 2012 before installing AMS Device Manager. SQL Server 2012 must be installed on a local partition on the Server Plus machine.
1.
Check if:
•
The PC meets the minimum system requirements (see page 9
).
40
Install AMS Device Manager
• AMS Device Manager 13.0 or earlier is installed on the PC. If yes, backup your
), uninstall AMS Device Manager (see page 5
), and uninstall
SQL Server Express (refer to your SQL Server documentation).
2.
Insert the SQL Server 2012 DVD in the DVD drive of your PC.
3.
Follow the prompts and ensure the following options are selected:
Table 3-3: SQL Server 2012 Service Pack 1 installation options
Screen
Setup Role
Feature Selection
Instance Configuration
Server Configuration - Service
Accounts tab
Database Engine Configuration -
Server Configuration tab
Reporting Services Configuration
Options
SQL Server Feature Installation
• Database Engine Services (required)
• Reporting Services - Native (required for reporting tool functionality)
• SQL Server Data Tools (required for reporting tool functionality)
• Integration Services (required for reporting tool functionality)
• Management Tools (recommended for troubleshooting)
Create an “Emerson2012” named instance
• SQL Server Agent | NT Authority\System
• SQL Server Database Engine | NT Authority\
System
• SQL Server Reporting Services | NT Authority\
System
• SQL Server Integration Services| NT Authority\
Network Services or SQL Server Integration
Services| NT Authority\System
• Mixed Mode (SQL Server authentication and
Windows authentication)
• Enter and confirm 42Emerson42Eme as the SA password
• Enter 1 or more SQL Server administrators
Install and configure
Use default settings for other parameters.
4.
Verify the selected features and click Install.
5.
Restart your PC.
6.
Install AMS Device Manager (see page 35
).
7.
Restore your database backup (see page 4
).
Note
If you are installing other applications on the computer where AMS Device Manager and a full version of SQL Server 2012 Service Pack 1 is installed, do NOT use the default Maximum server memory setting in
SQL Server Management Studio. See KBA NK-1500-0051 for more information.
41
Install AMS Device Manager
Install Server Plus Station software
Notes
•
•
If you are upgrading your software and changing the station type, you must uninstall the earlier version of AMS Device Manager before upgrading to AMS Device Manager 13.0. (See
on page 37).
If you are installing an AMS Device Manager distributed system using a domain controller, see
for other requirements.
1.
Exit/close all Windows programs, including any running in the background
(including virus scan software).
2.
Insert the AMS Device Manager program DVD 1 in the DVD drive of the PC to be used as the Server Plus Station.
3.
When the AMS Device Manager setup starts, click Install AMS Device Manager.
Note
If the autorun function is disabled on your PC, double-click D:
\AMSDEVICEMANAGER_SETUP.EXE
(where D is the DVD drive letter) and click OK.
4.
Click Server Plus Station.
5.
Follow the prompts.
NOTICE
Do not interrupt the installation process, or the software will not be fully installed and will malfunction. The installation process includes some system restarts. Do not remove the program DVD until the installation is complete.
Note
If you are installing on a Windows 7 or Windows Server 2008 PC, and User Account Control is enabled, the User Account Control dialog displays after rebooting the PC. Select Yes to continue with the AMS Device Manager installation.
If you do not click Yes within 2 minutes, the dialog closes and to complete the installation you must select Start > All Programs > AMS Device Manager > Continue the AMS Device Manager installation.
6.
If the Remove old Emerson Instance Name dialog appears, it is recommended to remove old versions to prevent performance issues. Select the instance you want to remove and click Remove. Otherwise, click Skip.
7.
License AMS Device Manager (see page 44
).
8.
If you are installing a distributed system, configure the Server Plus Station to recognize each station connected in the system (see
page 45 ). This step is essential
for the other stations to access the Server Plus Station.
9.
Set up and configure the system interfaces needed on this station (see page 69 ).
10.
Install the latest versions of any licensed SNAP-ON applications, if appropriate (see
).
42
Install AMS Device Manager
11.
Open AMS Device Manager, right-click each of the network icons and select Rebuild
Hierarchy followed by Scan > New Devices.
12.
If you are using the Alert Monitor feature, click the Alert Monitor button on the AMS
Device Manager toolbar to open the Alert List. Click the Station Monitoring button in the toolbar and ensure that the station you are monitoring is checked. Only stations with system interfaces configured need to be checked.
During installation, the AMSDeviceManager Windows user group is given access to the AMS folder, subfolders, and files. When an administrator adds specific Windows users in the
AMS Device Manager User Manager utility, these users are automatically added to the
AMSDeviceManager Windows user group. However, they have no ability to use AMS
Device Manager features until permissions are assigned to them in User Manager.
The installation creates a share of the AMS folder. This allows connected Client SC Stations to access the Server Plus Station. It also allows connected Client SC Stations to use the
Drawings/Notes feature of AMS Device Manager. If your situation makes this security configuration undesirable, consult your operating system documentation or your system administrator.
Note
The AMS Device Manager installation program turns off Windows Automatic Updates. After AMS
Device Manager is installed, check to see that the Windows Automatic Updates function is set as desired.
Install Client SC Station software
1.
Verify Client SC Station connectivity.
Use the ping command to verify that the designated Client SC Station PC responds to communications sent to it by the Server Plus Station.
a. At the AMS Device Manager Server Plus Station, select Start > Run from the
Windows taskbar.
b. In the text box, type CMD and click OK to open a command prompt.
c. At the command prompt, type PING <Client SC Station Computer Name>.
d. Press ENTER.
e. Verify that the Client SC Station PC responds to the ping command.
The ping command should return a reply message. If the ping command fails, verify that you typed the correct PC name in the command line. Also verify that your network is functioning properly. Contact your IT department if you cannot establish connectivity.
2.
Clear all applications from the Windows Startup folder until after installation is finished. Exit/close all Windows programs including any running in the background
(such as virus scan software).
3.
Insert the AMS Device Manager program DVD 1 in the DVD drive of the PC to be used as a Client SC Station.
4.
When the AMS Device Manager setup starts, click Install AMS Device Manager.
43
Install AMS Device Manager
Note
If the autorun function is disabled on your PC, double-click D:
\AMSDEVICEMANAGER_SETUP.EXE
(where D is the DVD drive letter) and click OK.
5.
Click Client SC Station.
6.
Follow the prompts.
NOTICE
Do not interrupt the installation process, or the software will not be fully installed and will malfunction. The installation process includes some system restarts. Do not remove the program DVD until the installation is complete.
Note
If you are installing on a Windows 7 or Windows Server 2008 PC, and User Account Control is enabled, the User Account Control dialog displays after rebooting the PC. Select Yes to continue with the AMS Device Manager installation.
If you do not click Yes within 2 minutes, the dialog closes and to complete the installation you must select Start > All Programs > AMS Device Manager > Continue the AMS Device Manager installation.
7.
License AMS Device Manager (see page 44
).
8.
Set up and configure the system interfaces needed on this station (see page 69 ).
9.
Install the latest versions of any licensed SNAP-ON applications, if appropriate (see
).
10.
Open AMS Device Manager, right-click each locally configured network icon and select Rebuild Hierarchy and then Scan > New Devices.
11.
If you are using the Alert Monitor feature, click the Alert Monitor button on the AMS
Device Manager toolbar to open the Alert List. Click the Station Monitoring button in the toolbar and ensure that the station you are monitoring is checked. Only stations with system interfaces configured need to be checked.
Notes
• The AMS Device Manager installation program turns off Windows Automatic Updates. After
AMS Device Manager is installed, check to see that the Windows Automatic Updates function is set as desired.
• You must add the Windows user as a user in AMS Device Manager User Manager (see
) or the AMS Device Manager Server icon will not display in the Windows system tray.
License AMS Device Manager
All licensing for an AMS Device Manager system is done on the Server Plus Station. After installation, start the Licensing Wizard and follow the prompts to gather registration information.
44
Install AMS Device Manager
Note
To gather the registration information, you need to know your Customer Access Code (supplied with your AMS Device Manager software).
After you register your software, the Registration Center returns your license codes and checksums by downloading from the AMS Device Manager registration website at: http://www.emersonprocess.com/systems/support/ams_register/10.c.survey.login.asp
When you receive your license codes, run the Licensing Wizard on the Server Plus Station to enter your license codes and checksums, which enables your system.
Notes
• During the licensing process, you must have read access to the PC disk drive you installed on
(C: drive by default) so that the Licensing Wizard can verify the hard disk serial number.
• License codes are assigned to the hard disk serial number of the C:\ boot partition.
1.
Select Start > All Programs > AMS Device Manager > Licensing > Licensing Wizard.
2.
Follow the instructions in the Licensing Wizard.
3.
If you are installing new license information on an existing station, start AMS Device
Manager to see the changes.
Configure a Distributed System
Before you can use your distributed system, you must configure the Server Plus Station so the Client SC Stations can access the Server Plus Station.
1.
On the Server Plus Station, select Start > All Programs > AMS Device Manager > Station
Configuration from the Windows taskbar.
2.
In the Station Configuration dialog, click Add.
3.
Enter the computer name of the Client SC Station PC (see
), and click OK.
Note
The station name is not case-sensitive. Do not include a domain name or any other characters that are not part of the computer name. Use station names of 15 ISO Latin-1 characters or less.
4.
Repeat steps 2 and 3 for each licensed Client SC Station, and click Close when done.
5.
Restart each Client SC station in order for all stations to recognize each other.
Consolidate databases
If you have multiple Server Plus Stations, you can consolidate their databases for use in a distributed system.
45
Install AMS Device Manager
1.
Back up the current database on all stations containing a database you want to
2.
Select one of the Server Plus Stations to hold the consolidated database. Import the database information from the other Server Plus Stations one at a time. This may be done using one of the following methods.
Method 1
Use this method when all the stations are connected to the same network and domain and at the same AMS Device Manager revision level.
• Right-click the Plant Database icon on the designated consolidation Server Plus
Station, select Import > From Remote to import the database from the other stations one at a time. Click Help on the Import From Remote System dialog for instructions.
Note
To Import > From Remote, you must have AMS Device Manager System Administration permissions.
Method 2
Use this method when the stations are not connected to a common network.
• From the Plant Database icon on all of the non-consolidation Server Plus Stations, select Export > To <type> Export File to prepare a database merge file. Click Help on the AMS Device Manager Export dialog for instructions.
3.
When the databases have been consolidated, perform a database backup of the consolidated database.
4.
The AMS Device Manager 13.0 Server Plus Station can be installed using one of the following methods:
Method 1
Install AMS Device Manager 13.0 as a station upgrade, if upgrading from version
11.0 or later which automatically migrates the consolidated database (see page 36
).
Method 2
Uninstall the current 10.x or earlier station software and install AMS Device Manager
13.0 as a new Server Plus Station (see page 42 ). Restore the consolidated database
(see
Consolidate Service Notes
The database backup operation also creates a backup file of service notes. If you would like to consolidate the service notes from multiple AMS Device Manager stations, follow the relevant instructions in the readme file for the Drawings and Notes Management Utility.
This information is included in the Tech_Support_Utilities\DrawingsAndNotesUtility folder on the
AMS Device Manager DVD 2.
46
Install AMS Device Manager
Determine computer names
Computer names are needed to identify the Server Plus Station and the connected Client
SC Stations during distributed system installation and configuration (see
Windows networking requirement, station names must be 15 bytes or less. Please note that some languages have characters that use more than 1 byte.
To find and record a computer name (do not use IP addresses):
1.
Right-click the Windows desktop My Computer icon and select Properties.
2.
Record the name of each computer that will be part of your distributed system (see the Computer name log example below).
Note
Computer names and DNS names must be the same. “Localhost” cannot be used in a distributed system. Do not include “\\” in any computer names.
Figure 3-1: Computer name log example
Modify a Distributed System
Once your distributed system is installed, any changes to its physical configuration may require special procedures in AMS Device Manager. To change station types in an existing
system, see page 48 . For other types of changes, see the following:
•
Change a Client SC Station to access a different Server Plus Station on page 48.
•
on page 49.
•
Replace a Server Plus Station PC on page 49.
•
Replace a Client SC Station PC
on page 49.
•
•
Rename a Server Plus Station PC
•
Add a new communication interface
on page 51.
•
Add more tags than currently licensed
on page 51.
47
Install AMS Device Manager
Change station types
If you are changing station types, perform the following appropriate procedures. You may also need to reset your users’ permissions (
).
Change a Server Plus Station to a Client SC Station
1.
Back up the database (see page 3
).
2.
Uninstall the previous Server Plus Station software (see page 5
).
3.
Ensure that a connection can be made to an available Server Plus Station.
4.
Install the Client SC Station software (see
).
5.
Restore or combine the database on another Server Plus Station (see
Change a Client SC Station to a Server Plus Station
1.
Contact your Emerson Process Management Sales/Service Office to get new license codes for .
2.
Uninstall the previous Client SC Station software (see page 5
).
3.
Install the Server Plus Station software (see page 42
).
4.
License AMS Device Manager (see page 44
).
Change a Client SC Station to access a different Server
Plus Station
1.
In Network Configuration on the Client SC Station, remove any configured system interfaces (other than HART Modem).
2.
Select Start > All Programs > AMS Device Manager > Server Plus Connect.
3.
In the Server Plus Connect dialog, select a Server Plus Station PC from the drop-down list or enter the name of the PC where the desired Server Plus Station is installed.
4.
Click Connect.
Note
For more information about the Server Plus Connect utility, refer to AMS Device Manager Books
Online.
The Server Plus Connect utility cannot be used on Client SC Stations installed on DeltaV or
Ovation workstations. In these configurations, use the procedure below.
1.
Uninstall AMS Device Manager on the Client SC Station (see page 5 ).
2.
Reinstall AMS Device Manager on the Client SC Station and indicate the new Server
).
48
Install AMS Device Manager
Add Client SC Stations
To expand an existing distributed system:
1.
Determine the number of stations covered by your current license (select Help >
About from the AMS Device Manager toolbar).
• To add stations that will be covered by your current license, continue with step 2.
• To add more stations than currently licensed, contact your Emerson Process
Management Sales/Service office to get new license codes. After you receive your new license codes, run the Licensing Wizard on the Server Plus Station (see
page 44 ) and then continue with step 2.
2.
To install AMS Device Manager on the added Client SC Stations, see
3.
Update the Client SC Station configuration on the Server Plus Station (see
4.
To enable the stations in the distributed system to recognize the added Client SC
Station, shut down and restart AMS Device Manager on all the stations.
Replace a Server Plus Station PC
1.
Contact your Emerson Process Management Sales/Service Office to get new license codes for .
2.
Back up the database (see page 3
).
3.
Uninstall AMS Device Manager from the old PC (see
). Rename or disconnect the PC from the network.
4.
Connect the new PC to the network and give it the same computer name as the old
PC.
Note
If the new Server Plus Station PC has a different computer name, all active alerts that were in the Alert Viewer on the old PC will be lost. In addition, you will be required to run the Server
Plus Connect utility on all Client SC Stations to connect to the new Server Plus Station (see
).
5.
Install Server Plus Station software on the new PC (see page 42
).
6.
License AMS Device Manager (see page 44
).
7.
Set up the server configuration to recognize each Client SC Station connected in the system (see
Configure a Distributed System on page 45).
8.
Restore the database.(see
Replace a Client SC Station PC
1.
Uninstall AMS Device Manager from the old PC (see
). Disconnect the PC from the network, if appropriate.
2.
Connect the new PC to the network.
49
Install AMS Device Manager
3.
On the Server Plus Station, select Start > All Programs > AMS Device Manager > Station
Configuration from the Windows taskbar.
4.
In the Station Configuration dialog, select the name of the old PC and click Remove.
5.
In the Station Configuration dialog, click Add.
6.
Enter the computer name of the new Client SC Station PC (see page 47
), and click
OK . The station name is not case-sensitive. Do not include a domain name or any other characters that are not part of the computer name.
7.
On the new Client SC Station PC, install the Client SC Station software (see
Rename a Server Plus Station PC
Note
If you have a system interface configured on the Server Plus Station, the Device Monitor List and
Alert Monitor alerts will be lost when the PC is renamed.
1.
Back up the database (see page 3
).
2.
Record all devices contained in the Device Monitor List.
3.
Uninstall AMS Device Manager on the Server Plus Station (see
4.
Rename the Server Plus Station PC: a. Right-click the Windows desktop My Computer icon.
b. Select Properties.
c. Click Change Settings (Windows 7 only).
d. On the Computer Name tab, click Change.
e. Enter a new computer name and click OK.
f. Click OK.
5.
Install AMS Device Manager on the Server Plus Station (see
6.
Restore the database backed up in step 1 (see page 4
).
7.
Reinstall the required system interfaces (see page 69
) and SNAP-ON applications
(see
8.
Open AMS Device Manager, right-click each network icon, and select Rebuild Hierarchy and then Scan > New Devices.
9.
Add the devices recorded in step 2 to the Device Monitor List (refer to AMS Device
Manager Books Online).
Rename a Client SC Station PC
Note
If you have a system interface configured on the Client SC Station, the Device Monitor List and Alert
Monitor alerts will be lost when the PC is renamed.
1.
Record all devices contained in the Device Monitor List.
50
Install AMS Device Manager
2.
Uninstall AMS Device Manager on the Client SC Station PC (see
3.
Rename the Client SC Station PC: a. Right-click the Windows desktop My Computer icon.
b. Select Properties.
c. Click Change Settings (Windows 7 only).
d. On the Computer Name tab, click Change.
e. Enter a new computer name and click OK.
f. Click OK.
4.
On the Server Plus Station, open Station Configuration and remove the old name of the Client SC Station PC and add the new name (see
5.
Install AMS Device Manager on the Client SC Station PC (see page 43 ).
6.
Reinstall the required system interfaces (see ) and SNAP-ON applications (see
).
7.
Open AMS Device Manager, right-click each network icon, and select Rebuild Hierarchy and then Scan > New Devices.
8.
Add the devices recorded in step 1 to the Device Monitor List on the Client SC
Station (refer to AMS Device Manager Books Online).
Add a new communication interface
1.
Contact your Emerson Process Management Sales/Service Office to get a new license code for the desired communication interface.
2.
Run the Licensing Wizard on the Server Plus Station (see page 44
).
3.
Configure the new communication interface (see AMS Device Manager Books Online).
Add more tags than currently licensed
1.
Contact your Emerson Process Management Sales/Service Office to get new license codes to cover the number of tags needed.
2.
Run the Licensing Wizard on the Server Plus Station (see page 44
).
3.
Start AMS Device Manager.
4.
Install and configure the additional devices.
Installing AMS Device Manager on domain controllers
AMS Device Manager creates a Windows user account (AmsServiceUser) on each station in a distributed system. When AMS Device Manager is installed on a domain controller, this account is created as a domain user. Communication failures will result if installation is not done correctly as follows:
51
Install AMS Device Manager
• If Windows domain controllers are used in a distributed network, the AMS Device
Manager station on the domain controller must be installed first before any other station on the common network domain. If AMS Device Manager is installed on a domain controller, all other stations that are part of that domain use the domain account, not a local account.
• If AMS Device Manager will be used in a cross-domain configuration, either install an
AMS Device Manager station on the domain controller or if AMS Device Manager will not be installed on a domain controller, create the AmsServiceUser account on the domain controller before installing AMS Device Manager on them. Refer to KBA
NA-0800-0113.
Notes
• If AMS Device Manager is installed on the domain controller OR if there is an AmsServiceUser account on the Domain Controller\Active Directory, there can only be one AMS Device Manager system installed on that domain.
•
•
If AMS Device Manager is NOT installed on the domain controller AND if there is NO
AmsServiceUser account on the Domain Controller\Active Directory, multiple systems can be installed on that domain.
After installing a Client SC Station on a domain controller together with a DeltaV
ProfessionalPLUS workstation, the AMS Device Manager Server system tray icon may not appear. Log out of the domain controller and log back in to make the AMS Device Manager
Server system tray icon appear.
• AMS Device Manager is not supported on a Windows Server 2008 read-only domain controller.
Domain controller security requirements
To launch and run AMS Device Manager, you must be a member of the
AMSDeviceManager user group.
Add a user to the AMSDeviceManager group on a domain controller
Note
The following procedure requires network administrator permissions.
1.
Select Start > Settings > Control Panel > Administrative Tools > Active Directory Users and
Computers .
2.
Select <Domain Name> > Users.
3.
Double-click the AMSDeviceManager group.
4.
Click Add.
5.
Enter the Windows User ID you want to add to the group and click OK.
6.
Click OK.
52
Install AMS Device Manager
Install SNAP-ON applications
After you have installed and licensed your AMS Device Manager software, you can install
SNAP-ON applications. Each SNAP-ON application is licensed separately and will not run if your station is not licensed for it.
Additional installation requirements may apply to a SNAP-ON application. Before you install a SNAP-ON application, check its documentation to confirm that all installation requirements are satisfied.
1.
Insert the AMS Device Manager DVD 1 in the DVD drive of the PC.
2.
Browse to D:\SNAP-ONS And Tools\SNAP-ONS\Installs\<Folder Name> (where D is the DVD drive letter and <Folder Name> is the name of the folder for the SNAP-ON application to be installed).
3.
Double-click the appropriate setup file.
4.
Follow the prompts.
Notes
• Most SNAP-ON applications need to be installed on each station in a distributed system.
Calibration Assistant is enabled through licensing–no separate installation is required.
•
•
For all SNAP-ON applications except AMS ValveLink and AMS Wireless, users must also have
Device Write permission (see page 64 ).
AMS ValveLink SNAP-ON application user privileges must be enabled in AMS Device Manager
User Manager.
• If a SNAP-ON application is not installed in the C:\Program Files folder, the
AMSDeviceManager Windows user group must be given access to the location.
Install AMS Device Manager Web Services on a station
1.
Review the AMS Device Manager Web Services software requirements (see page 15 ).
2.
Ensure that appropriate Windows Firewall security settings have been selected (see
).
3.
Exit/close all Windows programs, including any running in the background
(including antivirus software).
4.
Insert the AMS Device Manager DVD 1 in the DVD drive of the PC.
5.
Browse to D:\SNAP-ONS And Tools\AMSWebServices (where D is the DVD drive letter).
6.
Double-click SETUP.EXE.
7.
Follow the prompts.
53
Install AMS Device Manager
Mobile workstation
A mobile workstation is an AMS Device Manager Client SC Station connected wirelessly to a LAN. As long as the PC meets the AMS Device Manager requirements (see
functions like a station connected to a wired Ethernet LAN. However, do not configure system interfaces on a mobile workstation, as this can cause database issues regarding the path of the connected device. If at any time the mobile workstation wireless network connection is lost, you may have to restart AMS Device Manager to reestablish network connectivity.
Licensing AMS Device Manager 13.0 on DeltaV stations
If you have licensed your AMS Device Manager 13.0 software, you see a full-function application when you launch the product. Otherwise, you can use a limited AMS Device
Manager feature set provided with each DeltaV installation. If this is your situation, refer to the DeltaV Books Online for information.
When you install AMS Device Manager on a DeltaV Simulate Multi-node system, the installation program checks for the presence of a DeltaV Simulate ID key (VX dongle). If the Simulate ID key is found, AMS Device Manager licensing is enabled. Otherwise, the installation program looks for an AMS Device Manager license.dat file. If the license.dat file is found, you are granted the permissions associated with the license. If no license.dat file is found, a subset of AMS Device Manager functionality is available.
There are a number of licensing considerations when you install AMS Device Manager on a
DeltaV station. To ensure that your installation functions as you expect, please contact your Emerson Process Management Sales/Service Office. After you have received the appropriate licensing information and AMS Device Manager setup instructions for your
situation, install AMS Device Manager as described beginning on page 54
.
Installing AMS Device Manager 13.0 on DeltaV stations
AMS Device Manager 13.0 can be co-deployed only on DeltaV 11.3 or later stations. To ensure a proper installation, DeltaV must be installed before AMS Device Manager.
Notes
• Any AMS Device Manager station (either Server Plus Station or Client SC Station) installed on a
DeltaV 11.3 or later ProfessionalPLUS workstation must be licensed to ensure proper licensing functionality, proper security, proper user synchronization between DeltaV and AMS Device
Manager, and proper Device Description (DD) installation.
•
•
Installing a new version of AMS Device Manager does not install new AMS Device Manager
DDs on DeltaV.
If you are installing AMS Device Manager on any domain controller stations, refer to
54
Install AMS Device Manager
Before you install AMS Device Manager on your DeltaV stations, ensure that you have all the proper AMS Device Manager and DeltaV licensing and installation instructions (see
page 54 ). In addition, ensure that USB has been enabled in DeltaV Easy Security (see your
DeltaV documentation for more information).
To install Server Plus Station software on a supported DeltaV station, see page 42
. To install
Client SC Station software on a supported DeltaV station, see page 43
.
DeltaV actions
CAUTION!
Do not configure a DeltaV System Interface for the same DeltaV system on more than one AMS
Device Manager station.
After installing AMS Device Manager on a DeltaV Station, you must perform a download of the DeltaV workstation (refer to DeltaV Books Online). Downloading a DeltaV workstation adds DeltaV database account users to the AMS Device Manager database. Creating a new
Windows user in DeltaV User Manager also adds that user to the AMSDeviceManager
Windows user group.
Note
Each time a ProfessionalPLUS Station is downloaded, some DeltaV user permissions overwrite AMS
Device Manager user permissions if the User Download checkbox in the DeltaV tab of Tools > Options is selected.
DeltaV Upgrade Wizard
The DeltaV Upgrade Wizard automates the process of upgrading a DeltaV Station from an earlier version and ensures that crucial steps are performed. Do not run the DeltaV
Upgrade Wizard before uninstalling AMS Device Manager. If you run the DeltaV Upgrade
Wizard first, AMS Device Manager will not function as expected and a PC restart may be needed before AMS Device Manager can be uninstalled.
Uninstall DeltaV software
To uninstall DeltaV on a station that has AMS Device Manager co-deployed, you must uninstall AMS Device Manager first and then DeltaV. You can then reinstall AMS Device
Manager. If you uninstall DeltaV first, AMS Device Manager will not function as expected.
If you have co-deployed AMS Device Manager on domain controllers and non-domain controllers, you must remove AMS Device Manager from all non-domain controllers first, then from all backup/secondary domain controllers, and then from the primary domain controller. Uninstall DeltaV only after AMS Device Manager has been uninstalled on all PCs.
55
Install AMS Device Manager
Licensing AMS Device Manager 13.0 on Ovation stations
When you install AMS Device Manager on an Ovation station, the installation program checks for the presence of an AMS Device Manager license.dat file. If the license.dat file is found, you are granted all the permissions associated with the license. If you do not have a license.dat
file, see
page 44 . After you have received the appropriate licensing information,
install AMS Device Manager as described on page 56
.
Installing AMS Device Manager 13.0 on Ovation stations
AMS Device Manager 13.0 can be installed on Ovation 3.4 and later stations as outlined on
page 27 . AMS Device Manager stations can also be installed on separate PCs and access
Ovation information through the Ovation System Interface. To ensure a properly codeployed installation, Ovation must be installed before AMS Device Manager.
In a typical Ovation 3.4 deployment using FOUNDATION fieldbus devices, the AMS Device
Manager Server Plus Station software would be installed on the Ovation station that also has the fieldbus engineering software installed. AMS Device Manager Client SC Station software would be installed on other supported Ovation station types in the network. This deployment gives all connected stations access to both AMS Device Manager and Ovation databases.
In a typical Ovation 3.5 deployment using FOUNDATION fieldbus devices, the AMS Device
Manager Client SC Station software would be installed on the Ovation Database Server.
Other AMS Device Manager Client SC Station and the Server Plus Station software would be installed on Ovation Operator stations in the network. This deployment gives all connected stations access to both AMS Device Manager and Ovation databases.
Before you install AMS Device Manager on your Ovation stations, ensure that you have all the proper AMS Device Manager and Ovation licensing and installation instructions (see
To install Server Plus Station software on a supported Ovation station, see
install Client SC Station software on a supported Ovation station, see
Configure the Ovation System Interface (see AMS Device Manager Books Online) so that
AMS Device Manager can detect and work with devices on the Ovation network.
Configure any other required communication interfaces (see page 69
).
Notes
•
•
If you are installing AMS Device Manager on any domain controller stations, see
Do not configure an Ovation System Interface for the same Ovation system on more than one
AMS Device Manager station.
56
Install AMS Device Manager
• If you install a Client SC Station on an Ovation station running on a Windows Server PC, add the Client SC Station PC name to the DNS forward lookup zones list. Contact your IT department for assistance.
Uninstalling Ovation software
To uninstall Ovation on a station that has AMS Device Manager co-deployed, you must uninstall AMS Device Manager first and then Ovation. You can then reinstall AMS Device
Manager. If you uninstall Ovation first, AMS Device Manager will not function as expected.
If you have co-deployed AMS Device Manager on domain controllers and non-domain controllers, you must remove AMS Device Manager from all non-domain controllers first, then from all backup/secondary domain controllers, and then from the primary domain controller. Uninstall Ovation only after AMS Device Manager has been uninstalled on all
PCs.
Miscellaneous applications
DTM Launcher
The DTM Launcher application is an AMS Device Manager application installed as part of the AMS Device Manager installation. It enables users to install and use certain HART,
WirelessHART, and FOUNDATION fieldbus Device Type Manager (DTM) drivers with AMS
Device Manager. DTMs are an alternative to the traditional Device Descriptions (DDs) supported in AMS Device Manager. DTMs are provided by various device manufacturers and are configured using the DTM Catalog Manager. For more information, refer to AMS
Device Manager Books Online.
Note
Do not install other DTM frames as these may cause conflicts with the DTM Launcher application.
AMS Suite Calibration Connector
AMS Suite Calibration Connector is a separately licensed and installed application that integrates with Beamex CMX or AMS Suite APM/Meridium software to provide fullfeatured calibration management capabilities beyond the basic features available in AMS
Device Manager calibration management. AMS Suite Calibration Connector provides a solution for users to take advantage of the functionality of other calibration management applications while maintaining the benefits of device configuration and calibration management data synchronization. For more information about AMS Suite Calibration
Connector, contact your local Emerson Process Management Sales/Service Office.
AMS Suite Calibration Connector supports:
• AMS Suite APM version 3.5.1 or later
• Beamex CMX version 2.74 and 2.81
57
Install AMS Device Manager
AMS Suite Calibration Connector can only be installed on a Server Plus Station. You must have Windows Administrator permissions to install AMS Suite Calibration Connector.
Install AMS Suite Calibration Connector
1.
Insert the AMS Suite Calibration Connector DVD in the DVD drive of your PC.
2.
Double-click AMSSuiteCalibrationConnector_Setup.exe.
3.
Follow the prompts on the installation window.
4.
Click Finish when done.
For additional information about using AMS Suite Calibration Connector, refer to AMS
Device Manager Books Online, AMS Suite Calibration Connector and AMS Suite APM Installation
and Setup document, and AMS Suite Calibration Connector and Beamex CMX Installation and
Setup document. Also, refer to your AMS Suite APM or Beamex CMX documentation for more information on these products.
Note
Refer to the AMS Device Manager Supported Device List to determine if a device supports calibration.
Device Description Update Manager
•
•
The Device Description Update Manager automates the installation of device descriptions from Guardian Support into AMS Device Manager, DeltaV, and Ovation through the Add
Device Type utility. These device descriptions can be new or updates to previously installed devices. The Device Description Update Manager provides 2 ways to install device descriptions:
Scheduled/fully automated
User-initiated/interactive
There are 3 ways that this feature can be installed:
•
•
•
Server Station
Client Station
Server/Client Station
The Server Station can be installed with or without an AMS Device Manager station already installed but it must be installed on the same PC as the Guardian Software Update Delivery
Service download folder.
The Client Station must be installed on an AMS Device Manager 13.0 Server Plus Station that can access the Server Station to initiate installation of device descriptions. The Client
Station will be supported on an AMS Device Manager Server Plus Station co-deployed on either a DeltaV workstation or an Ovation workstation.
In a Server/Client Station installation, both the Server Station and Client Station are installed on the same Server Plus Station.
See KBA NK-1300-0136 Device Description Update Manager Architectures and Information for more information.
58
Install AMS Device Manager
Install Device Description Update Manager
1.
Insert the AMS Device Manager DVD 2 in the DVD drive of your PC.
2.
In the Device Description Update Manager folder, double-click
DDUMInstall_Setup.exe.
3.
Follow the prompts on the installation window.
4.
Click Finish when done.
User Configuration Reports
The User Configuration Reports tool works with the Bulk Transfer Utility on the AMS Device
Manager Server Plus Station. It allows you to verify that multiple devices are configured according to a specified user configuration. The User Configuration Reports tool allows you to check the device configurations of multiple devices and quickly identify any incorrect settings. For more information about user configurations and the Bulk Transfer
Utility, see AMS Device Manager Books Online.
The User Configuration Reports tool requires Microsoft SQL Server 2012 Service Pack 1,
Standard or Enterprise edition. See
Install a full version of SQL Server 2012 for required SQL
Server installation options.
The User Configuration Reports tool uses AMS Device Manager Generic Export to get device parameter data. If you have a large AMS Device Manager system, a large number of devices, or a large number of device parameters to return, the Generic Export process can take several hours.
Install the User Configuration Reports tool
1.
Insert the AMS Device Manager DVD 1 in the DVD drive of your PC.
2.
In the SNAP-ONS And Tools\Device Configuration Reports folder, double-click
DEVCONFIGREPORTSINSTALL.EXE
.
3.
Follow the prompts on the installation window and accept all default options.
4.
Open Internet Explorer and select Tools > Internet Options.
5.
On the Security tab, click Local Intranet, and uncheck Enable Protected Mode.
6.
Click OK.
After installation, start the User Configuration Reports tool in Windows 7 by clicking Start >
All Programs > AMS Device Manager > User Configuration Reports. In Windows 8, enter DEV on the
Start screen and click the User Configuration Reports tile.
Attach a Roving Station to a Server Plus Station
A Roving Station is a portable PC (laptop or notebook computer) with AMS Device
Manager Server Plus Station software installed. A Roving Station is configured as such in the Options for AMS Device Manager dialog (Tools > Options). A Roving Station can be temporarily connected to a stationary Server Plus Station to enable uploading of AMS
Device Manager information from the Roving Station. For more information about Roving
Stations, refer to AMS Device Manager Books Online.
59
Install AMS Device Manager
60
4
Prepare to use AMS Device Manager
Prepare to use AMS Device Manager
There are several configuration steps you must take before using AMS Device Manager. If you do not configure your PC as described, AMS Device Manager will not function as expected.
Change Windows Firewall settings
When operating AMS Device Manager on a Windows PC, some changes to Windows
Firewall settings may be required. If your PC is adequately protected by a corporate firewall, you may be able to turn off the Windows Firewall protection on your AMS Device
Manager PC.
If your AMS Device Manager PC is not protected by a corporate firewall and you have enabled the Windows Firewall, you must change the firewall settings on your PC to allow program and port exceptions that enable AMS Device Manager operation. For more information, refer to KBA NA-0500-0085. For assistance configuring your Windows Firewall, contact your IT department.
Notes
• On a Windows 7 PC, all entered firewall exceptions display as “AMS Suite: Intelligent Device
Manager” in the firewall exceptions list. You must view the properties of each entry to see what was added.
•
•
For deployment scenarios that require AMS Device Manager Client SC Stations to cross
External Firewalls, refer to KBA NA-0400-0046.
If AMS Device Manager is co-deployed with DeltaV 13.3, enable Windows Firewall and open a specific port using the DeltaV Security Administration Application (refer to DeltaV Books
Online for more information).
Usernames and passwords
Note
When AMS Device Manager is co-deployed with DeltaV, your DeltaV username and password also provide AMS Device Manager access.
AMS Device Manager security is based on Windows user authentication. Each user is given an AMS Device Manager username and password associated with a Windows local
(workgroup) or domain account. The AMS User Manager administrator determines the plant locations and/or functions allowed on that user account.
61
Prepare to use AMS Device Manager
User Manager utility
New in AMS Device Manager 13.0 is the ability to restrict operations on devices, as well as configuration of AMS Device Manager, to better accommodate your local security strategy. With User Manager, you can:
• create and assign users to groups
• assign permissions to groups
• create a particular set of permissions, known as a permission list
•
• assign permission lists to users and groups assign permissions to individual users
You can perform all of these actions across all areas in your Plant Locations hierarchy in
AMS Device Manager, or restrict access by a particular area, user, equipment module, or control module. If a device is part of a Safety Instrumented System, it can be managed with a separate set of permissions that apply to Safety Instrumented System devices.
Usernames, passwords, and permissions are assigned to users by an AMS Device Manager administrator, using the User Manager utility on the Server Plus Station. The user installing or migrating AMS Device Manager has all the rights necessary to assign users to view or change devices the appropriate plant locations with the appropriate permissions, and perform system-wide operations. All users must be part of the AMSDeviceManager
Windows group to perform operations in AMS Device Manager.
Permissions
AMS Device Manager users can be assigned three types of Permissions: Process Control
System, Safety Instrumented System, and System. Process Control System includes control over all devices in your system that are not safety devices. Safety Security
Instrumented System devices require a separate set of permissions to control them.
System permissions allow you to control the administration of the AMS Device Manager system, including the ability to set most items in the Tools > Options menu, management of the AMS Device Manager database, Network Configuration (adding System Interfaces),
User Management, and certain operations in AMS Wireless SNAP-ON and AMS ValveLink
SNAP-ON.
Users, Groups, and Permission Lists
You can assign users to Groups. If your security policy assigns permissions based on roles, think of groups as different roles, such as AMS Device Manager database operations, device calibration, or read-only.
Permission Lists allow you to create custom sets of permissions, which can be associated to users or groups.
DeltaV user accounts in AMS Device Manager
If you have a DeltaV system, and AMS Device Manager is installed on your DeltaV workstations, DeltaV database account users automatically also become AMS Device
Manager Windows Security Group users. Whenever a workstation download is performed from DeltaV Explorer, DeltaV database account users that were not previously in the AMS
62
Prepare to use AMS Device Manager
Device Manager database are added and DeltaV database account users that are already in the AMS Device Manager database are updated. See the DeltaV user accounts in AMS Device
Manager topic in AMS Device Manager Books Online for more details.
Migrated users from previous versions of AMS Device Manager
If you are upgrading from a previous version of AMS Device Manager, User Manager accounts are migrated automatically as Retired Users (even if they were previously
Windows local or domain users). The permissions for each user account are preserved, so you can create appropriate groups.
Note
See the AMS Device Manager Books Online for more information about the User Manager utility.
Launch User Manager
In Windows 7, select Start > All Programs > AMS Device Manager > User Manager . In Windows
8.1, enter AMS on the Start screen and click the User Manager tile.
Add a user
If you want to validate Windows users when you add them, import the users from the
Windows Active Directory(see
1.
Launch User Manager.
2.
Select New > New User.
3.
Enter a location\username, and other fields as necessary.
Important
Enter a valid Domain/Workgroup and Username combination that exists in the Windows
Active Directory. If invalid, the user will be added to User Manager but unable to run AMS
Device Manager.
4.
Select the Account is disabled checkbox to prevent this user from immediately running AMS Device Manager.
5.
(Optional) Select the Account is bound to Active Directory checkbox to allow syncing of user properties and enabled status between the Windows Active
Directory and the User Manager utility. Make sure your location contains an Active
Directory; typically Active Directory is located on a Windows Domain Controller. If the user is not in an Active Directory, this setting does not have any effect.
Note
Syncing is managed through the Windows Task Scheduler. It occurs in one direction: from the
Windows Active Directory to the User Manager utility.
6.
In the Group Membership area, add the user to a group (see page 66
).
63
Prepare to use AMS Device Manager
7.
If you want to give the user Permissions beyond what is assigned to the user's group, add a permission list (see AMS Device Manager Books Online.
8.
Click Save.
Import users from the Windows Active Directory
1.
Launch User Manager.
2.
Select Active Directory > Import Users.
3.
Click Locations... and select the network location from which you want to import users.
4.
Enter Windows usernames, separated by a semicolon, and click Check Names.
5.
Click OK.
6.
(Optional) In the General area, select checkboxes for the users being imported:
• Select the Account is disabled checkbox to import a user without providing them immediate access to AMS Device Manager.
• Select the Account is bound to Active Directory checkbox to enable syncing of user properties and enabled status between the Windows Active Directory and the
User Manager utility.
Note
Syncing is managed through the Windows Task Scheduler. It occurs in one direction: from the
Windows Active Directory to the User Manager utility.
7.
Click Save.
The users are added to User Manager. Enabled users can now run AMS Device
Manager.
Edit individual permissions for a user
1.
Launch User Manager.
2.
Click the Users button in the objects pane on the left.
3.
In the editing pane on the right, double-click a user from the global list.
4.
(Optional) Add permissions or permission lists: a. In the Plant Locations box, select the plant location at which you want the new permissions or permission lists to apply.
The Permission box displays the permissions that are currently effective at that plant location, including those assigned at that location (text only) and those inherited from a higher plant location (text plus the icon). Permissions inherited from a group are not shown.
b. Click Add above the Permission box.
The Select permissions pane is displayed on the right.
64
Prepare to use AMS Device Manager c. In the Select Permissions pane, select the checkboxes for the individual permissions or permission lists you want to add.
Note
Selecting the checkbox next to a permissions set selects all permissions in the set.
d. Click Select.
The number of new permissions or permission lists ready to be added is indicated in parentheses next to the plant location you selected. For example, Unit B (+3) indicates that three permissions or permission lists are ready to be added to the plant location called Unit B, and the permissions or permission lists to be added are highlighted, indicating unsaved changes.
5.
Remove permissions or permission lists:
Important
Removing a permission at a given plant location has no impact on the user's privileges in AMS
Device Manager if the permission is also assigned to the user at a higher plant location, or is inherited through group membership.
a. In the Plant Locations box, select the plant location from which you want to remove permissions or permission lists.
The Permission box displays the permissions that are currently effective at that plant location, including those assigned at that location (text only) and those inherited from a higher plant location (text plus the icon). Permissions inherited from a group are shown in the group only.
b. In the Permission box, select the permissions or permission lists you wish to remove.
Tip
To select multiple permissions or permission lists, use Ctrl-click or Shift-click.
Note
To be removed from a plant location, a permission must be shown in black text.
Permissions shown in gray text and marked with the icon are inherited from a higher plant location, and can be removed only at that higher plant location. Permissions shown in gray text but not marked with the icon are dependent permissions at the current plant location; these can be removed, but only after the permission on which they depend is removed.
c. Click Remove.
65
Prepare to use AMS Device Manager
The number of permissions or permission lists ready to be removed is indicated in parentheses next to the plant location you selected. For example, Area C (-3) indicates that three permissions or permission lists are ready to be removed from the plant location called Area C, and the permissions or permission lists to be removed are highlighted, indicating unsaved changes.
6.
Click Save.
If the user is currently running AMS Device Manager, changes take effect after they close and restart the application.
Disable/enable a user
You can disable a user to prevent them from running AMS Device Manager, or enable a user that is currently disabled to allow them to run it again.
1.
Launch User Manager.
2.
Click the Users button in the objects pane on the left.
3.
In the editing pane on the right, double-click a user from the global list of users.
The user information is displayed in the editing pane.
4.
Select or clear the Account Is Disabled checkbox.
5.
Click Save.
The user account status is changed. A disabled user can no longer run AMS Device
Manager. If you have selected the Account is bound to Active Directory box, the user's status in Active Directory overrides this setting whenever the Windows Task
Scheduler is scheduled to retrieve user information from Windows. See AMS Device
Manager Books Online for more information on Active Directory binding.
Add user to group
Note
AMS User Manager permissions are additive. You can assign permissions to groups (site-wide by default), or assign permissions to a user only in a particular Plant Location or belonging to a permission list. If one method grants write permission, and another grants only read, the user has write permission. Emerson recommends either group-based or user-based permissions, but not both.
1.
Select a user to display its properties on the right.
2.
Under the Group Membership section, select Add, and select a Group.
3.
Choose Select and Save.
The user is added to the group, and inherits its permissions. See AMS Device Manager
Books Online for information on the as-shipped permissions associated with the asshipped groups.
66
Prepare to use AMS Device Manager
Edit a group
Edit properties and members of groups, and the permissions of the group. Emerson recommends a strategy to either assign permissions to groups, or to users, but not both, since permissions of users are combined with permissions of groups to which they belong.
1.
Launch User Manager.
2.
Click the Groups button in the objects pane on the left.
3.
In the editing pane on the right, double-click a group from the global list.
4.
(Optional) Select the Account is bound to Active Directory checkbox to allow syncing of group properties between the Windows Active Directory and the User Manager utility; clear the checkbox to prevent syncing.
Note
Syncing is managed through the Windows Task Scheduler. It occurs in one direction: from the
Windows Active Directory to the User Manager utility.
5.
In the Members area, add or remove group members.
6.
In the Permissions area, edit the group permissions. You can also assign a permission list to a group.
7.
Click Save.
If AMS Device Manager is running, permission changes take effect after AMS Device
Manager is closed and restarted.
Edit permissions for a group
1.
Launch User Manager.
2.
Click the Groups button.
3.
In the editing pane on the right, double-click a group.
4.
In the Assigned Permissions area, click the expansion arrow to unhide the Plant
Locations and Permission boxes, if hidden.
5.
Add permissions or permission lists: a. In the Plant Locations box, select the plant location at which you want the new permissions or permission lists to apply.
The Permission box displays the permissions that are currently effective at that plant location, including those assigned at that location (text only) and those inherited from a higher plant location (text plus the icon).
b. Click Add above the Permission box.
The Select permissions pane is displayed on the right.
67
Prepare to use AMS Device Manager c. In the Permissions or Permission Lists areas, click the expansion arrows as needed to reveal check boxes for individual permissions, or contents for permission lists.
d. Select the checkboxes for the permissions or permission lists you want to add.
Note
Selecting the checkbox next to a permissions set selects all permissions in the set.
e. Click Select.
The number of new permissions or permission lists ready to be added is indicated in parentheses next to the plant location you selected. For example, Unit B (+3) indicates that three permissions or permission lists are ready to be added to the plant location called Unit B. The icon is also displayed, and the permissions or permission lists to be added are highlighted, indicating unsaved changes.
6.
Remove permissions or permission lists:
Important
Removing a permission at a given plant location has no impact on the group members' privileges in AMS Device Manager if the permission is also assigned to the group at a higher plant location, or if members have the same permission assigned as an individual permission.
a. In the Plant Locations box, select the plant location from which you want to remove the permission or permission list.
The Permission box displays the permissions that are currently effective at that plant location, including those assigned at that location (text only) and those inherited from a higher plant location (text plus the icon).
b. In the Permission box, select the permissions or permission lists you wish to remove.
Tip
To select multiple permissions or permission lists, use Ctrl-click or Shift-click.
Note
You cannot remove a permission or permission list inherited from a higher location.
c. Click Remove.
The number of permissions or permission lists ready to be removed is indicated in parentheses next to the plant location you selected. For example, Area C (-3) indicates that three permissions or permission lists are to be removed from the plant location called Area C. The icon is also displayed, and the permissions or permission lists ready to be removed are highlighted, indicating unsaved changes.
68
Prepare to use AMS Device Manager
7.
Click Save.
For users in the group who are currently running AMS Device Manager, permission changes take effect after they close and restart the application.
Configure system interfaces
AMS Device Manager communicates with HART, WirelessHART, FOUNDATION fieldbus,
PROFIBUS DPV1 and PROFIBUS PA devices through various system interfaces. If this is a new installation or you are adding interfaces to an existing system, you need to configure the network after you have installed the software.
You need to configure the system interfaces that are relevant to each station. You should only configure a particular physical network on one station within the distributed network to avoid the potential for simultaneous device configuration.
To configure a system interface, check the system requirements (see
) and refer to the Network configuration overview topic in AMS Device Manager Books Online. Some system interfaces that require additional configuration are discussed in this section.
DeltaV
A DeltaV control network is an isolated Ethernet local area network (LAN) that provides communication between the controllers and the stations. It uses one or more Ethernet hubs for communication.
Note
Do not configure an AMS Device Manager Wireless System Interface if a DeltaV System Interface will be using the same wireless gateway.
For information about AMS Device Manager compatibility with DeltaV, refer to page 22
.
DeltaV can access devices in RS3 and PROVOX I/O systems through the DeltaV Interface for RS3 I/O and DeltaV Interface for PROVOX I/O, respectively. The devices are displayed in the DeltaV network hierarchy in AMS Device Manager. For more information, refer to the
DeltaV Books Online.
The AMS ValveLink SNAP-ON application is supported for DeltaV and PROVOX I/O cards, but not for RS3 I/O cards.
Prepare the DeltaV system
To prepare a DeltaV control system to communicate with an AMS Device Manager station, you need to:
• Know the node name of the DeltaV ProfessionalPLUS Station you are connecting to.
If you do not know this name, see your system administrator.
• Know the password associated with the DeltaVAdmin account on the
ProfessionalPLUS Station, if it has been changed from the default password.
69
Prepare to use AMS Device Manager
• Configure a HART-Enabled Channel so that AMS Device Manager knows where to look for a HART field device. If an I/O channel is enabled for HART but it does not have an associated DeltaV device signal tag, it will not appear in AMS Device
Manager.
• Commission any FOUNDATION fieldbus devices you want to be displayed in AMS
Device Manager.
Set DeltaV alert capability
To receive alerts from devices connected to PROVOX and RS3 Migration Controllers in your
DeltaV network hierarchy, you must run a utility to properly set the DeltaV alert capability.
1.
Select Start > Run from the Windows taskbar.
2.
In the text box, type C:\AMS\BIN\DELTAVFASTSCANUTILITY.EXE (where C is the drive containing the AMS folder).
3.
Uncheck the box for the appropriate DeltaV network.
4.
Click Save Changes.
FF HSE
Your AMS Device Manager distributed system can be configured to access FF HSE linking devices in a dedicated network environment. This configuration is recommended and requires a dedicated network interface card (NIC) for connecting to the FF HSE linking devices. This arrangement provides best performance because the FF HSE linking devices are not required to share the network with other network traffic. In this case, you manually assign the TCP/IP address of the linking device.
The alternative is to configure your AMS Device Manager distributed system to access FF
HSE linking devices from an Ethernet network that assigns TCP/IP addresses using DHCP.
Note
If you assign a static TCP/IP address to a linking device, a valid gateway address must also be provided. The gateway address is usually the TCP/IP address of the dedicated NIC. If the gateway address is invalid, you will see a delay in AMS Device Manager when rebuilding the hierarchy. In addition, no links or FOUNDATION fieldbus devices will be displayed after performing the Rebuild
Hierarchy operation.
Ovation
The Ovation System Interface lets AMS Device Manager communicate with HART,
FOUNDATION fieldbus, PROFIBUS DPV1, and WirelessHART devices through an existing
Ovation network.
Prepare the Ovation system
Refer to your Ovation documentation for device connection and network setup instructions.
70
Prepare to use AMS Device Manager
For Ovation 3.4, the AMS Device Manager Server Plus Station must be co-deployed on an
Ovation Station with the Ovation fieldbus engineering software installed for FOUNDATION fieldbus device support. Configure the Ovation System Interface on this station.
For Ovation 3.5, the fieldbus engineering software is located on the Ovation Database
Server. Therefore, it is recommended to install AMS Device Manager Client SC Station software on this station type. To install and register this software on an Ovation Operator station type, you must run an Ovation batch file on the Ovation Operator station.
Run the batch file on the Ovation Operator station
1.
Select Start > Run from the Windows taskbar.
2.
In the text box, type CMD and click OK to open a command prompt.
3.
At the command prompt, type CD C:\OVATION\OVATIONBASE.
4.
Press ENTER.
5.
At the command prompt, type INSTALLHSESERVER -I.
6.
Press ENTER.
PROVOX
A PROVOX system controls field devices linked together by a communication network called a highway. All communicating PROVOX field devices, including the SRx Controller
Family products, are connected to this network.
Field devices are grouped into communication highways in the PROVOX Data Highway or
PROVOX Highway II. Both systems are multi-drop, half-duplex type. A traffic controller supervises the communication on a PROVOX Data Highway; a token-passing technique controls communication on a PROVOX Highway II.
Prepare the PROVOX system
To prepare a PROVOX control system to communicate with AMS Device Manager, you need to:
•
•
•
Know the TCP/IP address and DNS name of your dedicated HDL (Highway Data Link).
If you do not know these, see your system administrator.
Generate and transfer the PROVOX hierarchy information to AMS Device Manager
(see
Verify that the HDL responds (see page 72
).
Generate and transfer the HLT file
The PROVOX system uses the HART Instrument Locator Tool (HILT) to create a commadelimited value (CDV) file that defines the addresses of field devices connected to the SRx/
SR90 controller. The file name can be anything that is meaningful, as long as it uses an
“hlt” extension (such as Provox1.hlt). After you create the HLT file, transfer it to the AMS folder on the AMS Device Manager PC and identify the HLT file in the Connection tab of
Network Configuration Properties (see AMS Device Manager Books Online).
71
Prepare to use AMS Device Manager
AMS Device Manager reads the HLT file and attempts to communicate with devices at every defined address, which can cause unpredictable results if the file is built using “all devices” as the default setting. The HLT file should hold only the device addresses that are relevant to AMS Device Manager.
Note
For AMS Device Manager to recognize the change when you add or delete a device in PROVOX, you must regenerate the HLT file on the ENVOX PC and transfer it to the AMS folder on the AMS Device
Manager PC, replacing the old HLT file.
To provide AMS Device Manager with the PROVOX HLT file information:
1.
At the ENVOX PC, generate the HLT file by running the HART Instrument Locator
Tool (HILT) utility.
For information about using the HILT utility, see Using the HART Instrument Locator
Tool (HILT) Version P3.0 (Readhilt.rtf). This RTF file is located in the HILT folder on the
AMS Device Manager DVD 1.
2.
Copy the HLT file from the ENVOX PC to the AMS folder on your AMS Device
Manager PC, using file transfer protocol (FTP).
Verify HDL response
Use the ping command to verify that the HDL responds to communications sent to it by
AMS Device Manager:
1.
At the AMS Device Manager PC, select Start > Run from the Windows taskbar.
2.
In the text box, type CMD and click OK to open a command prompt.
3.
At the command prompt, type PING <HDL DNS Name>.
If your network does not support DNS, replace the DNS name with the IP address of your HDL in the ping command.
4.
Press ENTER.
5.
Verify that the HDL responds to the ping command.
The ping command should return a reply message. If the ping command fails, verify that you typed the correct address in the command line. Also verify that your network is functioning properly.
Installation is complete only after you receive a valid ping reply.
RS3
A Rosemount System 3 (RS3) system controls field devices linked together through
Controller cards connected to a PeerWay through ControlFiles. A PeerWay can accommodate up to 32 system devices, called nodes, to allow each control system device to communicate through the PeerWay and the RS3 Network Interface (RNI).
72
Prepare to use AMS Device Manager
Prepare the RS3 system
To prepare an RS3 control system to communicate with AMS Device Manager, you must:
• Know the TCP/IP address and DNS name of your RNI. If you do not know these, see your system administrator.
• Set up a username and password for the system interface on your RNI (see
).
• Verify that the RNI responds (see
Set RNI username and password
1.
On your RNI, open the RNI user configuration file, \\RNIBOOT\CONFIG\USERFILE.CFG.
You can open it with the Notepad utility, or any other text editor.
2.
Create a user account for AMS Device Manager, ensuring that FMSPassthrough is enabled and that KeyLevel is set to Console.
Example: The following example shows the system interface user entry in the
USERFILE.CFG file. The user entry in bold is an example of an RS3 user entry. You can create the system interface user entry by copying and pasting an existing user entry in USERFILE.CFG and editing the entry for system interface.
<User
<Name RS3OpStation>
<Password RS3Performance>
<KeyLevel CONSOLE>
<Attributes
<ReadUsers ON>
<SendAlarms ON>
<FMSPassthrough ON>
<RemoteBoot ON>
>
<User
<Name AMS>
<Password Passthrough>
<KeyLevel CONSOLE>
<Attributes
<ReadUsers ON>
<SendAlarms ON>
<FMSPassthrough ON>
<RemoteBoot ON>
>
Notes
• The username and password are case-sensitive in the USERFILE.CFG file. When entering them in the AMS Device Manager Network Configuration utility, be sure to match the case.
• AMS ValveLink SNAP-ON application is not supported.
3.
Save and close USERFILE.CFG.
73
Prepare to use AMS Device Manager
Verify communication with RNI
Use the ping command to verify that the RNI is responding:
1.
At the AMS Device Manager PC, select Start > Run from the Windows taskbar.
2.
In the text box, type CMD and click OK to open a command prompt.
3.
At the command prompt, type PING <RNI DNS Name>. (If your network does not support DNS, replace the DNS name with the IP address of your RNI in the ping command.)
4.
Press ENTER.
5.
Verify that the RNI responds to the ping command. The ping command should return a reply message.
6.
If the ping command fails, verify that you typed the correct address in the command line. Also verify that your network is functioning properly.
Installation is complete only after you receive a valid ping reply.
Add devices to an AMS Device Manager installation
All available information for supported field devices (other than device manuals) is included and installed with the AMS Device Manager application. If it is necessary to install additional devices after the initial installation, refer to Device Type Installation in AMS
Device Manager Books Online. Additional device descriptions can be downloaded from the
Internet. Copy this URL into your Internet browser: http://www2.emersonprocess.com/en-US/documentation/deviceinstallkits/Pages/ deviceinstallkitsearch.aspx
and enter device search information.
74
5
Troubleshoot installation errors
Troubleshoot installation errors
If you get error messages during the installation or startup of AMS Device Manager, you may be able to resolve these errors using the troubleshooting procedures in this section.
If you are unable to resolve installation problems after carefully following the installation steps outlined in this guide and using these troubleshooting suggestions, contact your local Emerson Process Management Sales/Service Office. Additional Support Center
Contact Information can be found on the Internet at: http://www3.emersonprocess.com/systems/support/RateCard.pdf
To troubleshoot non-installation issues, refer to KBA NK-1400-0417.
Error messages
Error message / Indication
Bluetooth adapter stops working.
Possible Cause
The SQL Server installation fails.
Possible solution
If an approved USB Bluetooth adapter is removed or disabled while AMS Device Manager is running, reinsert the adapter and reboot your workstation.
After your PC restarts, try to reestablish Bluetooth communications with your
Field Communicator.
Manually install SQL Server
2012 Express Service Pack 1 from the AMS Device Manager
DVD 1. Do one of the following:
• For 32-bit PCs, run Install_
SQL2012SP1Express32bit.bat
from the Install_Files\
SQL2012SP1Exp\32 folder.
• For 64-bit PCs, run Install_
SQL2012SP1Express64bit.bat
from the Install_Files\
SQL2012SP1Exp\64 folder.
The SQL Server manual installation process requires user input that you must provide. After you install SQL
Server, restart the AMS Device
Manager installation process.
75
Troubleshoot installation errors
Error message / Indication
AMS Device Manager Install has encountered an error trying to login to the SQL Server database. Please refer to the
Installation Guide for SQL
Server database configuration.
Setup will now abort.
AMS Device Manager has detected an incorrect version of the database.
The version detected is x.x, the correct version should be y.y.
Possible Cause
This occurs on a domain-based
AMS Device Manager system where a different administrator installed SQL Server and another administrator is installing the Server Plus
Station.
Database Verify/Repair was not run before upgrading AMS
Device Manager to the current release or AMS Device Manager has detected a fault that occurred during the Verify/
Repair operation.
Cannot find server or DNS
Error.
Unable to connect to live device.
Unable to launch the AMS
Device Manager application from the Client SC Station.
“Connecting to OPC Server
Failed” when attempting to launch the OPC Client application.
Unable to launch the AMS
Device Manager application from the Client SC Station.
Possible solution
Open SQL Server Management
Studio and add the user who is installing the Server Plus
Station.
Run the database conversion utility (AmsConvertDb.exe) from the AMS\Bin folder:
1. Open the AMS\Bin folder.
2. Double-click
AmsConvertDb.exe.
If the database conversion utility does not complete successfully, contact your local
Emerson Process Management
Sales/Service Office.
Open port 80 on the Server
Plus Station where AMS Device
Manager Web Services is configured. See
Change Windows Firewall settings on page 61.
Add AmsFFServer.exe to the exception list. See
Change Windows Firewall settings on page 61.
Open port 135. See
Change Windows Firewall settings on page 61.
Add AMSOPC.exe to the exception list. See
Change Windows Firewall settings on page 61.
Add sqlserver.exe and sqlbrowser.exe to the exception list. See
Change Windows Firewall settings on page 61.
76
Error message / Indication
AMS Device Manager may be slow to start when launched from the Windows Start menu.
The following messages are displayed in the Application event log:
Unable to retrieve the current configuration information for server, <PC name>.
Error calling GetServersAsXml.
Possible Cause
Troubleshoot installation errors
Possible solution
Add AMSServicesHoster.exe to the exception list. See
Change Windows Firewall settings on page 61.
77
Troubleshoot installation errors
78
Index
Index
A
AMS Device Manager add devices
Books Online
upgrade
AMS Device Manager Web Services
AMS Asset Portal 3.2
AMS Suite
Asset Performance Management
AMS Suite Calibration Connector
AMSDeviceManager Windows user group 18
B
Bluetooth HART modem
C
Client SC Station access different Server Plus Station
change to Server Plus Station
communication interfaces configure
D database backup
restore
DeltaV
DeltaV System Interface actions
Det-Tronics System Interface
Device Configuration Reports
Device Description Update Manager
distributed AMS Device Manager system add Client SC Station
add more tags 51 add new communication interface 51
configure
rename Client SC Station PC
rename Server Plus Station PC
replace Client SC Station PC
replace Server Plus Station PC
domain controller
add user to AMSDeviceManager group 52
install AMS Device Manager
security requirements
DTM Launcher
F
FF HSE interface
H hardware requirements
memory
PC processing speed 10 serial interfaces 10
HART modem
Bluetooth
HART multiplexer
HART Over PROFIBUS System Interface
I installation
AMS Device Manager Client SC Station 43
AMS Device Manager on Ovation stations
AMS Device Manager Server Plus Station 42
on DeltaV stations
SQL Server 2012
Introduction
79
Index
K
L
licensing
AMS Device Manager on DeltaV station
on Ovation stations
M mobile workstation
modems
N network requirements
O operating systems
P
PROFIBUS System Interface
PROVOX System Interface
R
requirements
8000 BIM System Interface
DeltaV
Det-Tronics
HART multiplexer
HART Over PROFIBUS
OpenEnterprise
PROFIBUS
STAHL
Wireless Network
Roving Station
80
S
Server Plus Station
change to Client SC Station
Siemens System Interface
SNAP-ON applications
software requirements
database
operating systems
support for remote desktop services
web browser
SQL Server change 'sa' account password
STAHL System Interface
system requirements
T troubleshoot
error messages 75 installation errors 75
U uninstall AMS Device Manager
upgrade from AMS Device Configurator
40 from AMS Wireless Configurator 40
User Manager add user
disable/enable users
edit group
edit group permissions
import users from Windows Active Directory
launch
usernames
W
Windows 8.1 procedures
Windows Firewall change settings
Windows security requirements
Index
81
Emerson Process Management
Reliability Solutions
12001 Technology Drive
Eden Prairie, MN 55344 USA
T 1(952) 828-3633
F 1(952) 828-3006
©2015, Emerson Process Management. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. AMS is a mark of one of the Emerson Process Management family of companies. All other marks are the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
10P5824D002/printed in USA/08-2015
Stáhnout
Veřejný odkaz aktualizován
Veřejný odkaz na váš chat byl aktualizován. You may view and manage your chat links after registration here.
Veřejný odkaz na dokument
Reklama
