AMS Device View Installation Guide
Version 1.0 Installation Guide
May 2017
Disclaimer
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. This document is not to be redistributed without permission from Emerson.
Copyright and trademark information
© Emerson. 2017. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co.
AMS, DeltaV ™ , and Ovation ™ are marks of one of the Emerson group of companies.
FOUNDATION ™ , HART ® and Wireless HART ® are marks of the FieldComm Group of Austin, Texas, USA.
Intel ® and Intel ® Core ™ are registered trademarks, or trademarks of Intel Corporation in the U.S. and/or other countries.
Microsoft ® and Windows ® are registered trademarks of the Microsoft Corporation in the United States and/or other countries.
All other marks are property of their respective owners.
Document history
Part number Date
May 2017
Description
Initial release
Contents
Contents
Chapter 1 Introduction .....................................................................................................................1
1.1
AMS Device View overview .............................................................................................................1
1.2
Before you begin ............................................................................................................................ 1
1.3
Reference documents .................................................................................................................... 1
Chapter 2 System requirements ....................................................................................................... 3
2.1
Hardware requirements ................................................................................................................. 3
2.2
Software requirements ...................................................................................................................4
2.3
Security requirements ....................................................................................................................6
Chapter 3 Install AMS Device View ................................................................................................... 7
3.1
Install IIS .........................................................................................................................................7
3.2
Install the AMS Device View web server .......................................................................................... 8
3.3
Configure AMS Device View client devices ......................................................................................8
Index ................................................................................................................................................. 13
i
Contents ii
1
1.1
1.2
1.3
Introduction
Introduction
This AMS Device View Installation Guide contains the following information:
•
Chapter 1 , Introduction - provides an overview of AMS Device View and lists
information you need to know before installing AMS Device View.
•
Chapter 2 , System requirements - lists hardware, software, and security
requirements for AMS Device View.
•
Chapter 3 , Install AMS Device View - describes the procedures for installing AMS
Device View and configuring your devices to trust the AMS Device View SSL
Certificate.
AMS Device View overview
AMS Device View extends your AMS Device Manager system by delivering device health and calibration status information through a browser. With AMS Device View, you can quickly see which devices need maintenance and you can view recommended actions from any place with a browser connection.
With intuitive dashboards and focused alerts, AMS Device View lets you quickly access the data you need.
For more information on how to use AMS Device View, see the AMS Device View Help.
Before you begin
To install AMS Device View effectively, you should be familiar with the basic functions and operations of:
• Microsoft Windows
• Microsoft Internet Information Services (IIS)
• Your LAN configuration and security
• Your AMS Device Manager system
You also need an activation code before installing AMS Device View. See
page 4 for
more details.
Reference documents
This AMS Device View Installation Guide is available in the AMS Device View\Install_Files\PDF
Documentation folder on AMS Device Manager DVD 1.
1
2
Introduction
1.3.1
After AMS Device View is installed, the AMS Device View Help is copied to your PC and can be accessed when you open AMS Device View (see
page 2 ).
For more information on AMS Device Manager, see the AMS Device Manager Planning and
Installation Guide and Books Online .
AMS Device View Help
The AMS Device View Help provides detailed reference and procedural information for using AMS Device View. It explains the features and functions of AMS Device View. You can access the AMS Device View Help by selecting > from AMS Device View.
Use the Contents, Index, or Search sections to find specific topics.
2
2.1
System requirements
System requirements
The PC where you are installing the AMS Device View web server must meet the minimum software and hardware requirements to ensure successful installation and operation of
AMS Device View.
Hardware requirements
To install the AMS Device View web server, the PC must meet the following requirements:
• Intel ® Core ™ 2 Quad processor, 2.4 GHz or greater
•
•
4 GB or more of memory
2 GB or more of free hard disk space
3
4
System requirements
2.2
2.2.1
Software requirements
Operating systems
The AMS Device View web server requires the following Windows operating systems:
Operating System
Windows 7
Windows 10
Windows Server 2008 R2
Windows Server 2012 R2
Windows Server 2016
Version
Professional Service Pack 1 1
Enterprise Service Pack 1 1
Professional 2
Enterprise 2
Standard Service Pack 1 2
Enterprise Service Pack 1 2
Standard 2
Datacenter 2
Standard 2
Datacenter 2
Notes
1 32-bit and 64-bit versions of the operating systems are supported. 32-bit versions are supported only when AMS Device View is installed on an AMS Device Manager station co-deployed with DeltaV or Ovation.
2 Only 64-bit versions of the operating systems are supported.
• Desktops, laptops, and tablets with touchscreens are supported on Windows 10.
• The correct operating system service pack (SP) must be installed on your PC before installing AMS Device View. If your PC does not have the correct SP installed, or you are unsure, contact your network administrator.
2.2.2
2.2.3
License
You need an activation code to install AMS Device View. To get the activation code, email
Emerson Worldwide Customer Service or call Toll-Free 888.367.3774 (U.S. and Canada) or
+63.2.702.1111 (Rest of World) and provide your AMS Device Manager system ID. Your system ID can be found by opening Help > About AMS Device Manager on your AMS Device
Manager system.
AMS Device Manager compatibility
AMS Device View requires AMS Device Manager 13.5. You can install AMS Device View on a standalone PC without AMS Device Manager or co-deployed with AMS Device Manager. If you install AMS Device view on a standalone PC or on a Client SC Station, the installation will prompt you to enter the Server Plus Station name or IP address and the AMSDBUser password.
2.2.4
2.2.5
2.2.6
2.2.7
System requirements
Note
You do not need to enter the AMSDBUser password if it has not been changed.
DeltaV compatibility
To deploy AMS Device View on the control network, install the AMS Device View web server on a DeltaV Application Station. Alternatively, it can be installed on the DeltaV
ProfessionalPLUS Station, but this is NOT recommended. If you want to access AMS Device
View on the plant network, we recommend that you install the AMS Device View web server on a standalone PC in a demilitarized zone above the control network.
Notes
• AMS Device View is not supported on any other DeltaV stations.
• AMS Device View is not supported on a PC with Plant Messenger installed.
Microsoft components
The AMS Device View web server requires and installs the following Microsoft components:
• Microsoft .NET Framework version 4.6.1
• Microsoft .NET Core (32-bit) version 1.0.1
• Microsoft .NET Core Windows Server Hosting
• Microsoft Visual C++ 2015 Redistributable
Internet Information Services
The AMS Device View web server requires Internet Information Services (IIS). Use the default settings when installing IIS. The following IIS modules are installed when default settings are selected:
• Anonymous Authentication Module
• ASP.NET Core Module
Contact your network administrator for more information.
Web browsers
AMS Device View supports the following web browsers:
• Microsoft Internet Explorer version 11
• Microsoft Edge version 25
• Google Chrome version 53.0.2785 or higher
5
6
System requirements
2.3
Security requirements
You need Windows system administrator rights to install and configure the AMS Device
View web server. Contact your network administrator if there are other network security requirements before installation.
To access and use AMS Device View, Windows users must be enabled and given Device
Read and SIS Device Read permissions in the AMS Device Manager User Manager utility.
Users with Manage Alert Configurations permissions can disable alerts in AMS Device View.
Users with Plant Location restrictions can only view devices in their assigned areas. See
AMS Device Manager Books Online for more information on AMS Device Manager security.
Certificate Management
AMS Device View uses self-signed certificates as an out-of-the-box solution with a strong recommendation for the use of commercial CA issued public key certificates.
3
3.1
Install AMS Device View
Install AMS Device View
Ensure that the PC where you are installing the AMS Device View web server meets the minimum system requirements (see
page 3
).
•
•
Install IIS
• To install IIS in Windows 7 or Windows 10:
1. Select Start > Control Panel .
2. Click Programs .
3. Click Turn Windows features on or off .
4. Select the Internet Information Services checkbox and click OK .
5. Restart your PC.
To install IIS in Windows Server 2008 R2:
1. Select Start > All Programs > Administrative Tools > Server Manager .
2. Select Roles on the left and click Add Roles .
3. Click Next .
4. Select the Web Server (IIS) check box.
5. Click Next .
6. Click Next .
7. Click Install .
8. Click Close .
To install IIS in Windows Server 2012 or Windows Server 2016:
1. Select Start > Server Manager .
2. Select Manage > Add Roles and Features .
3. Click Next .
4. Select Role-based or feature-based installation .
5. Click Next .
6. Select a server and click Next .
7. Select the Web Server (IIS) check box.
8. Click Add Features .
9. Follow the prompts.
10.Click Install .
11.Click Close .
7
8
Install AMS Device View
3.2
3.3
3.3.1
Install the AMS Device View web server
1.
Install IIS (see page 7 ).
2.
Exit/close all Windows programs, including any running in the background
(including virus scan software).
3.
Insert the AMS Device Manager DVD 1 in the DVD drive of the PC.
4.
In the AMS Device View folder, double-click AMSDeviceView_Setup.exe
.
5.
If a message about third-party components is displayed, click OK .
6.
(Optional) Restart your PC, if prompted.
7.
Click Next .
8.
Enter the activation code and click Next .
Note
For information on how to get your activation code, see page 4
.
9.
Accept the License Agreement and click Next .
10.
Do one of the following:
• Click Next to install AMS Device View in the default location.
• Click Browse to select a different location, and click OK .
11.
If you want a Secure Sockets Layer (SSL) connection between the web server and the devices that access it, select the Enable Require SSL check box.
12.
Click Next .
13.
(Optional) The AMS Device View Server Config dialog is displayed if you are installing on a PC without the Server Plus Station installed. Enter the Server Plus Station PC name or IP address and the AMSDbUser Password and click Configure .
Note
If the AMSDbUser Password has not been changed, leave the default entry and click
Configure.
14.
Click Finish .
Configure AMS Device View client devices
There are several configuration tasks you must do before using AMS Device View. If you do not configure your client devices as described, AMS Device View will not function as expected.
Export the AMS Device View SSL Certificate
1.
On the AMS Device View web server, enter certmgr.msc
on the Start screen and press Enter .
3.3.2
Install AMS Device View
2.
Expand Trusted Root Certification Authorities and select Certificates .
3.
Right-click the AMS Device View certificate and select All Tasks > Export .
Note
To quickly find the certificate, looks for AMS Device View under the Friendly Name column.
4.
Click Next .
5.
Select No, do not export the private key .
6.
Click Next .
7.
Select DER encoded binary X.509 (.CER) .
8.
Browse to a location where you want to save the certificate and enter a file name.
9.
Click Save.
10.
Click Next .
11.
Click Finish .
Install the AMS Device View SSL Certificate on Windows
PCs
1.
Copy the certificate file you exported in the AMS Device View web server (see
page 8
) to your AMS Device View client PC.
2.
Double-click the certificate file.
3.
Click Install Certificate .
4.
Do one of the following:
• On Windows 10, Server 2012 R2, or Server 2016, select Local Machine and click
Next .
• On Windows 7 or Server 2008 R2, click Next .
5.
Click Next .
6.
Select Place all certificates in the following store .
7.
Click Browse and select Trusted Root Certification Authorities .
8.
Click OK .
9.
Click Next .
10.
Click Finish .
11.
If you see the Security Warning dialog, click Yes .
12.
Click OK .
13.
Restart your browser and open AMS Device View.
Note
When you open AMS Device View, ensure that you use the fully qualified domain name (for example, https://myserver.mydomain.com/AmsDeviceView) of the AMS Device View web server. See
page 11 for more information.
9
Install AMS Device View
3.3.3
3.3.4
Install the AMS Device View SSL Certificate on iOS devices
1.
Email the certificate file you exported in the AMS Device View server (see
page 8
) to an account accessible on your iOS device.
2.
Open the email and tap the attached certificate file.
3.
Tap Install .
4.
Tap Install Now .
5.
Tap Done .
6.
Go to Settings > General > About > Certificate Trust Settings .
7.
Turn on the toggle button for the AMS Device View certificate.
8.
Tap Continue .
Install the AMS Device View SSL Certificate on Android devices
1.
Copy the certificate file you exported in the AMS Device View web server (see
page 8
) to a specific location on your Android device.
2.
Open Settings > Security .
3.
Scroll down to Credential Storage and tap Install from device Storage .
4.
Browse to the location of the certificate file and select the certificate.
5.
Enter a Certificate name.
6.
Select VPN and apps under Credential use .
7.
Tap OK .
8.
Open Trusted Credentials > USER .
The certificate is displayed under the USER tab.
9.
Open AMS Device View on Google Chrome.
Note
When you open AMS Device View, ensure that you use the fully qualified domain name (for example, https://myserver.mydomain.com/AmsDeviceView) of the AMS Device View web
server. See page 11 for more information.
10.
(Optional) Re-install the certificate from Google Chrome, if prompted.
11.
(Optional) If Google Chrome asks you to install the certificate again, tap Cancel .
AMS Device View should now open without any security warnings.
10
3.3.5
Install AMS Device View
View the fully qualified domain name of the AMS Device
View web server
1.
On the AMS Device View server PC, click Start .
2.
Right-click on Computer .
3.
Select Properties .
The fully qualified domain name is listed in the Full computer name field.
11
Install AMS Device View
12
Index
A
AMS Device View Help 2
AMS Device View web server
install 8
view fully qualified domain name
11
B
before you begin 1
C
configure AMS Device View clients 8
H
hardware requirements 3
I
IIS
install 7 installation 7
introduction
1
L license
4
O operating systems
4
overview 1
R
reference publications 1
S security requirements
6
software requirements
AMS Device Manager
4
DeltaV
5
IIS
5
Microsoft components
5
operating systems
4
web browser
5
SSL Certificate
Android install
10
export 8
iOS devices install
10
Windows PC install 9
system requirements
3
Index
13
Emerson
12001 Technology Drive
Eden Prairie, MN 55344 USA
T 1(952)828-3000 www.Emerson.com
© 2017, Emerson.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
All rights reserved. AMS is a mark of one of the Emerson group of companies. The Emerson logo is a trademark and service mark of
Emerson Electric Co. All other marks are the property of their respective owners.
2017
