Canon PowerShot SX100 IS User guide

ENGLISH
Camera User Guide
Getting Started
Learning More
Components Guide
Basic Operations
Commonly Used Shooting Functions
Shooting Using the Mode Dial
Various Shooting Methods
Playback/Erasing
Print Settings/Transfer Settings
Connecting to a TV
Troubleshooting
List of Messages
Appendix
Ensure that you read the Safety Precautions (pp. 176 – 185).
Workflow and Reference Guides
The following guides are available. Refer to them as necessary according to the
flowchart below.
: Contents of This Guide
Check the package contents
Getting Started (p. 7)
Explains how to complete tasks ranging from installing batteries and memory cards
to setting the date and time, shooting, playing and erasing images, and performing
simple printing tasks.
Learning More (p. 37)
Names camera components and provides more detailed instructions for shooting
and playback. Lists information for more advanced use of your camera.
Connect the camera
to other devices
• Connecting to a printer
• Connecting to a TV set
• Connecting to a computer
Getting Started Guide
Direct Print User
Guide
Software Starter
Guide
Checking the Package Contents
1
Checking the Package Contents
The following items are included in the package. If something is missing,
please contact the retail outlet at which you purchased the product.
a Camera
Alkaline
b AA
Batteries (×2)
Card
c Memory
(16MB)
Cable
d Interface
IFC-400PCU
Cable
e AV
AVC-DC300
Strap
f Wrist
WS-200
Digital
g Canon
Camera Solution
h European
Warranty System
Disk
(EWS) Booklet
i User Guides
• Getting Started Guide
• Canon Digital Camera
Manuals Disk
You may not be able to achieve the full performance of this camera
with the included memory card.
You can use SD memory cards, SDHC (SD High
Capacity) memory cards, MultiMediaCards, MMCplus
cards and HC MMCplus cards in this camera. These
memory cards are collectively referred to as memory
cards in this guide.
2
Table of Contents
Table of Contents
Items marked with a
are lists or charts that summarize camera
functions or procedures.
Please Read
6
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Shooting Still Images (
Mode) . . . . . . . . . . . . . . . . . . . 14
Viewing Still Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Shooting Movies (
Standard Mode) . . . . . . . . . . . . . . . . . 18
Viewing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Erasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Downloading Images to a Computer. . . . . . . . . . . . . . . . . . . 24
System Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Learning More . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Components Guide
Using the Control Dial . . . . . . . . . . . . . . . . . . . . . . . . . . .
Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic Operations
Menus and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Menus and Default Settings. . . . . . . . . . . . . . . . . . . . . . .
Using the LCD Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . .
LCD Monitor Brightness. . . . . . . . . . . . . . . . . . . . . . . . . .
Information Displayed on the LCD Monitor . . . . . . . . . . .
Resetting Settings to Their Default Values . . . . . . . . . . .
Formatting Memory Cards . . . . . . . . . . . . . . . . . . . . . . . .
Commonly Used Shooting Functions
38
41
42
43
43
44
44
46
51
52
53
58
59
60
Shooting with the Optical Zoom. . . . . . . . . . . . . . 60
Table of Contents
Using the Digital Zoom/Digital Tele-Converter . . . . . . . .
Using the Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shooting Close-ups (Macro) . . . . . . . . . . . . . . . . . . . .
Using the Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Recording Pixels (Still Images) . . . . . . . . .
Changing the Compression (Still Images) . . . . . . . . . . . .
Configuring the Postcard Mode . . . . . . . . . . . . . . . . . . . .
Embedding the Date in the Image Data. . . . . . . . . . . . . .
Setting the Image Stabilizer Function . . . . . . . . . . . . . . .
Shooting Using the Mode Dial
Mode Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shooting Modes for Specific Scenes . . . . . . . . . . . . . . . .
Movie Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shooting Panoramic Images (Stitch Assist) . . . . . . .
Program AE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Shutter Speed . . . . . . . . . . . . . . . . . . . . .
Setting the Aperture . . . . . . . . . . . . . . . . . . . . . . . . .
Manually Setting the Shutter Speed and Aperture . .
Various Shooting Methods
3
61
65
66
67
69
70
71
72
73
75
75
76
79
83
85
86
88
90
91
Continuous Shooting . . . . . . . . . . . . . . . . . . . . . . . . . 91
Setting the Red-Eye Reduction Function. . . . . . . . . . . . . 93
Setting the Slow Synchro Function . . . . . . . . . . . . . . . . . 94
Checking the Focus and Peoples’
Expressions (Focus Check) . . . . . . . . . . . . . . . . . . . . . 95
Switching between Focus Settings . . . . . . . . . . . . . . . . . 97
Selecting an AF Frame Mode . . . . . . . . . . . . . . . . . . . . . 98
Selecting a Subject to Focus On
(When [Face Detect] Is Selected) . . . . . . . . . . . . . . . 101
Shooting Hard-to-Focus Subjects
(Focus Lock, AF Lock, Manual Focus, Safety MF) . . 103
Locking the Exposure Setting (AE Lock) . . . . . . . . . . . . 107
Locking the Flash Exposure Setting (FE Lock) . . . . . . . 109
Adjusting the ISO Speed. . . . . . . . . . . . . . . . . . . . . 110
Reducing Camera Shake When Shooting (Auto ISO Shift) . 111
Adjusting the Exposure Compensation . . . . . . . . . . . 114
Switching between Metering Modes . . . . . . . . . . . . . . . 115
4
Table of Contents
Adjusting the Tone (White Balance) . . . . . . . . . . . . . . .
Shooting in a My Colors Mode. . . . . . . . . . . . . . . . . . . .
Switching between Flash Adjustment Settings . . . . . . .
Adjusting Flash Compensation Settings . . . . . . . . . . . .
Setting the Flash Output . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting Exposure for Built-in Flash Shooting (Safety FE). .
Registering Settings to the Print/Share Button . .
Setting the Display Overlays . . . . . . . . . . . . . . . . . . . . .
Setting the Auto Rotate Function . . . . . . . . . . . . . . . . . .
Creating an Image Destination (Folder). . . . . . . . . . . . .
Resetting the File Number . . . . . . . . . . . . . . . . . . . . . . .
Playback/Erasing
Magnifying Images . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Images in Sets of Nine (Index Playback) . .
Check the Focus and Facial Expressions
of Subjects (Focus Check Display) . . . . . . . . . . . . . .
Jumping to Images . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Movies (Movie Replay Control Panel) . . . . . . .
Rotating Images in the Display . . . . . . . . . . . . . . . . . . .
Playback with Transition Effects . . . . . . . . . . . . . . . . . .
Automated Playback (Auto Play) . . . . . . . . . . . . . . . . . .
Red-Eye Correction Function. . . . . . . . . . . . . . . . . . . . .
Resizing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Attaching Sound Memos to Images . . . . . . . . . . . . . . . .
Protecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing All Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Print Settings/Transfer Settings
116
119
121
122
123
124
125
127
128
129
131
133
133
134
135
138
139
141
142
143
144
149
150
152
153
154
Setting the DPOF Print Settings . . . . . . . . . . . . . . . . . . 154
Setting the DPOF Transfer Settings . . . . . . . . . . . . . . . 159
Connecting to a TV
161
Shooting/Playback Using a TV . . . . . . . . . . . . . . . . . . . 161
Troubleshooting
162
List of Messages
172
Table of Contents
Appendix
5
176
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preventing Malfunctions . . . . . . . . . . . . . . . . . . . . . . . .
Battery Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling the Memory Card . . . . . . . . . . . . . . . . . . . . . .
Using the Power Kits (Sold Separately). . . . . . . . . . . . .
Using an Externally Mounted Flash (Sold Separately) .
Replacing the Date Battery . . . . . . . . . . . . . . . . . . . . . .
Camera Care and Maintenance. . . . . . . . . . . . . . . . . . .
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
176
181
182
184
186
189
191
193
194
Index
203
Functions Available in Each Shooting Mode
208
„ Symbol Conventions in this Guide
Commonly Used Shooting Functions
71
Configuring the Postcard Mode
Mode: Shooting (
)/Playback (
)
See Functions Available in Each Shooting Mode (p. 222).
Shooting Mode
You can shoot images with the optimal settings for postcards by
composing them inside the print area (width-to-height ratio of
approximately 3:2) shown in the LCD monitor.
1
Select
Available shooting modes
.
1. Press the
button.
2. Use the
or
button to select
and choose
with the
or
button.
3. Press the
button.
• The area that will not print displays in
gray.
• Approximately 2M recording pixels,
and compression settings are fixed to
These modes are available
(Fine).
These modes are not available
The digital zoom or the digital tele-converter cannot be used in
this mode.
: This mark denotes issues that may affect the camera’s
operation.
: This mark denotes additional topics that complement the
basic operating procedures.
Explanations in this guide are based on the camera’s default settings
at time of purchase.
6
Please Read
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that you
shoot several trial images to confirm that the camera is operating and being
operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are
not liable for any consequential damages arising from any malfunction of a
camera or accessory, including memory cards, that results in the failure of an
image to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and should
never be used in a manner that infringes upon or contravenes international or
domestic copyright laws and regulations. Please be advised that in certain cases
the copying of images from performances, exhibitions, or commercial properties
by means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
For information on your camera’s warranty, please refer to the Canon European
Warranty System (EWS) Booklet supplied with your camera.
For Canon Customer Support contacts, please see the European Warranty
System (EWS) Booklet.
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become
warm. Please be aware of this and take care when operating the camera for an
extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification. Less than
0.01% of the pixels may occasionally misfire or appear as red or black dots.
This has no effect on the recorded image and does not constitute a malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region before
using it with a TV monitor.
Language Setting
Please see the Setting the Display Language (p. 13) to change the language
setting.
Getting Started
z Preparations
z Shooting Still Images
z Viewing Still Images
z Shooting Movies
z Viewing Movies
z Erasing
z Printing
z Downloading Images to a Computer
z System Map
Getting Started
8
Preparations
Preparations
Installing the batteries
1. Slide the battery cover lock (a) and hold it open while
sliding the cover (b) and opening it (c).
Battery Cover Lock
Open the cover.
a
Slide the cover.
c
b
2. Install two batteries.
Negative end (–)
Positive end (+)
Insert the two supplied
AA-size alkaline batteries.
Preparations
9
it until it clicks into place (e).
d
e
„ Attaching the Wrist Strap
It is recommended to use the wrist strap to avoid dropping the
camera during use.
Getting Started
3. Close the cover (d), and press downward as you slide
Getting Started
10
Preparations
Inserting the Memory Card
1. Slide the battery cover lock (a) and hold it open while
sliding the cover (b) and opening it (c).
Battery Cover Lock
Open the cover.
a
Slide the cover.
c
b
2. Insert the memory card until it clicks into place.
Back
Write Protect Tab
Example:
SD memory card
• Confirm that the
write protect tab is
unlocked (only SD
memory cards).
• Check the memory
card for the correct
orientation.
Preparations
11
it until it clicks into place (e).
d
e
„ To Remove the Memory Card
Push the memory card with your finger until the memory card clicks
and then release it.
Getting Started
3. Close the cover (d), and press downward as you slide
Getting Started
12
Preparations
Setting the Date and Time
The Date/Time settings menu will appear the first time the power is
turned on. Set the date and time as shown in Steps 3 and 4 in the
explanation below.
ON/OFF Button
Button
Control Dial
Buttons
Button
1. Press the ON/OFF button.
2. Select [Date/Time].
1. Press the
button.
2. Use the
or
button to select
the
(Set up) menu.
3. Use the
or
[Date/Time].
4. Press the
button to select
button.
3. Select the month, day, year and time, and the display
order.
1. Use the
option.
or
button to select an
2. Use the
or
button to set the
value.
• You can also set the value by turning
the control dial.
4. Press the
5. Press the
button.
button.
Preparations
13
Setting the Display Language
You can change the language displayed in the LCD monitor menus
and messages.
Button
Button
Buttons
Button
1. Press the
(Playback) button.
2. Hold down the
button and press the
button.
3. Use the , , or button to select a language.
4. Press the
button.
Getting Started
You can imprint the date and time you have set onto images
(p. 72).
Getting Started
14
Shooting Still Images
Shooting Still Images (
Mode)
ON/OFF button
Shutter Button
Indicator
Mode DIal
1. Press the ON/OFF button.
• The start-up sound will play and the start-up image will display in
the LCD monitor.
• Pressing the ON/OFF button again turns the power off.
2. Select a shooting mode.
1. Set the mode dial to
.
3. Aim the camera at the subject.
Shooting Still Images
15
to set the focus.
• When the camera focuses, it beeps
twice and the indicator lights green
(orange when the flash will fire).
Shooting Preparations
Complete: lights green
• If
blinks red, we recommend
shooting with a flash (p. 65) (the
message “Raise the flash” also
appears in
mode).
• An AF frame will display in green on
the LCD monitor at the point of focus.
AF Frame
5. Press the shutter button fully to
shoot.
• The shutter sound will play once and
the image will record.
• The indicator will blink green and the
file will record to the memory card.
Recording: blinks green
Mute Setting
Pressing the DISP. button while switching on the camera power will
set the mute setting to [On] to silence all camera sounds except for
warning sounds. The setting can be changed with the [Mute] option in
the Set up menu (p. 48).
Getting Started
4. Press the shutter button halfway
Getting Started
16
Shooting Still Images
Reviewing an Image Right After
Shooting (Rec. Review)
Recorded images are displayed on the LCD monitor for approximately
2 seconds immediately after shooting.
Shutter Button
Button
You can also use the following methods to continue displaying the
image immediately after shooting so that you can check it.
z Keep the shutter button pressed fully.
z Press the
button while the recorded image is displayed.
• Confirm the camera beeps once.
You can shoot by pressing the shutter button even when an
image is being displayed.
To stop displaying the image, press the shutter button halfway.
Change the image display time with [Review] in the Rec. menu
(p. 47).
Viewing Still Images
17
Button
Control Dial
Buttons
1. Press the
(Playback) button.
The last recorded image will display.
2. Use the
or
button to display the image you wish to
view.
• Use the
button to move to the previous image and the
button to move to the next image.
• The images advance more quickly if you keep the button
pressed, but they will appear coarse.
• You can also select images by turning
the control dial. Turning it
counterclockwise displays the
previous image while turning it
clockwise displays the next image.
If you have played back images, the last image viewed will
display (Resume Playback). If the memory card has been
switched, or the images on the memory card have been edited
with a computer, the newest image on the memory card
appears.
Getting Started
Viewing Still Images
Getting Started
18
Shooting Movies
Shooting Movies (
Standard Mode)
ON/OFF button
Sutter Button
Indicator
Mode Dial
1. Press the ON/OFF button.
2. Select a shooting mode.
1. Set the mode dial to
(Movie).
2. Confirm that the camera is set to
(Standard).
3. Aim the camera at the subject.
z Do not touch the microphone while
recording.
z Do not press any buttons other
than the shutter button. The sound
that buttons make will be recorded
in the movie.
Microphone
Shooting Movies
19
to set the focus.
• The camera will beep twice and the
indicator will light green when the
camera focuses.
• The exposure, focus and white
balance are automatically set when
you press the button halfway.
Shooting Preparations
Complete: lights green
5. Press the shutter button fully to
shoot.
• Recording starts.
• During the recording, the elapsed
recording time and [zRec] will display
in the LCD monitor.
Elapsed Time
6. Press the shutter button fully
again to stop recording.
• The indicator will blink green and the
data will be recorded onto the memory
card.
• Recording will stop automatically
when the maximum recording time
elapses, or the built-in memory or
memory card become full.
Recording: blinks green
Getting Started
4. Press the shutter button halfway
Getting Started
20
Viewing Movies
Viewing Movies
Button
Control Dial
Button
Buttons
1. Press the
(Playback) button.
2. Use the or button to display a movie and press the
button.
• Images with a
icon are movies.
• You can also select an image by
turning the control dial.
3. Use the
or
button.
button to select
• The movie will start playing.
• If you press the FUNC./SET button
during playback, you can pause and
restart the movie.
• You can adjust the playback volume
with the
or
button.
(Play) and press the
Erasing
21
Button
Button
Control Dial
Button
Buttons
1. Press the
(Playback) button.
2. Use the or button to select an image to erase and
press the
button.
You can also select an image by turning the control dial.
3. Confirm that [Erase] is selected and press the
button.
• To exit instead of erasing, select
[Cancel].
Please note that erased images cannot be recovered. Exercise
adequate caution before erasing an image.
Getting Started
Erasing
Getting Started
22
Printing
Printing
Button
Terminal Cover
DIGITAL
Terminal
Control Dial
Buttons
Button
1. Connect the camera to a direct print compatible printer*1.
• Slide the camera’s terminal cover to the left to open and insert
the interface cable all the way into the terminal.
• See the printer’s user guide for connection instructions.
Canon Brand Printers
SELPHY Series Compact
Photo Printers*2
Camera
Interface Cable
Inkjet Printers
*1 Since this camera uses a standard protocol (PictBridge), you can use it with
other PictBridge-compliant printers in addition to Canon-brand printers.
*2 You can also use the CP-10/CP-100/CP-200/CP-300.
Printing
23
(Playback) button to turn on the
camera.
• The
button will light blue.
•A
,
or
icon will appear in the
LCD monitor if the connection is
correct (the displayed icons differ
according to the connected printer).
•
will display on movies.
4. Use the
press the
or
button to select an image to print and
button.
• The
button will blink blue and printing will start.
• You can also select an image by turning the control dial.
After you finish printing, turn off the camera and the printer and
disconnect the interface cable.
Always grasp the sides of the connector when disconnecting
the interface cable from the camera’s DIGITAL terminal.
Getting Started
2. Turn on the printer.
3. Press the camera’s
Getting Started
24
Downloading Images to a Computer
Downloading Images to a Computer
Items to Prepare
• Camera and computer
• Canon Digital Camera Solution Disk supplied with the camera
• Interface cable supplied with the camera (Be sure to use only the
supplied cable)
System Requirements
Please install the software on a computer meeting the following
minimum requirements.
„ Windows
OS
Windows Vista
Windows XP Service Pack 2
Windows 2000 Service Pack 4
Computer Model
The above OS should be pre-installed on computers with builtin USB ports.
CPU
Windows Vista
Windows XP/Windows 2000
: Pentium 1.3 GHz or higher
: Pentium 500 MHz or higher
RAM
Windows Vista
Windows XP/Windows 2000
: 512 MB or more
: 256 MB or more
Interface
USB
Free Hard Disk
Space
• Canon Utilities
- ZoomBrowser EX
: 200 MB or more
- PhotoStitch
: 40 MB or more
• Canon Camera TWAIN Driver : 25 MB or more
Display
1 024 × 768 pixels/High Color (16 bit) or better
„ Macintosh
OS
Mac OS X (v10.3–v10.4)
Computer Model
The above OS should be pre-installed on computers with builtin USB ports.
CPU
PowerPC G3/G4/G5 or Intel Processor
RAM
256 MB or more
Interface
USB
Free Hard Disk
Space
• Canon Utilities
- ImageBrowser
- PhotoStitch
Display
1 024 × 768 pixels/32 000 Colors or better
: 300 MB or more
: 50 MB or more
Downloading Images to a Computer
25
Ensure that you install the software first before connecting the
camera to the computer.
1. Installing the software.
„ Windows
1. Place the Canon Digital Camera Solution Disk in the
computer’s CD-ROM drive.
2. Click [Easy Installation].
Follow the onscreen messages to
proceed with the installation.
3. Click [Restart] or [Finish] once the
installation is complete.
When the installation is finished,
[Restart] or [Finish] will display. Click
the button that appears.
4. Remove the CD-ROM from the
drive when your normal desktop
screen appears.
„ Macintosh
Double-click the
icon in the CDROM window. When the installer
panel appears, click [Install]. Follow
the onscreen instructions to proceed.
Getting Started
Preparing to Download Images
Getting Started
26
Downloading Images to a Computer
2. Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer’s USB
port and to the camera’s DIGITAL terminal.
Slide the camera’s terminal cover to the left to open and insert
the interface cable all the way into the connector.
USB Port
DIGITAL Terminal
Terminal Cover
Interface Cable
3. Preparing to download images to the computer.
1. Press the
(Playback) button to
turn on the camera.
Always grasp the sides of the connector when disconnecting
the interface cable from the camera’s DIGITAL terminal.
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the
computer when you attach the camera and open a connection.
Downloading Images to a Computer
27
Select [Canon CameraWindow] and
click [OK] (first time only).
If the window above does not appear, click the [Start] menu
and select [All Programs] or [Programs], followed by [Canon
Utilities], [CameraWindow], [CameraWindow] and
[CameraWindow].
CameraWindow will display.
Preparations for downloading images are now finished. Please
proceed to the Downloading Images Using the Camera (Direct
Transfer) section (p. 29) (except Windows 2000).
With Windows 2000, you can download images using the
computer. Please refer to the Software Starter Guide for details.
Getting Started
„ Windows
Getting Started
28
Downloading Images to a Computer
„ Macintosh
The following camera window
will appear when you establish
a connection between the
camera and computer. If it fails
to appear, click the
[CameraWindow] icon on the
Dock (the bar which appears at
the bottom of the desktop).
Preparations for downloading images are now finished. Please
proceed to the Downloading Images Using the Camera (Direct
Transfer) section (p. 29).
Refer to the Software Starter Guide for instructions on
downloading images.
Downloading Images to a Computer
29
Install the software before downloading images via the direct
transfer method for the first time (p. 25).
Use this method to download images using camera operations.
(Except Windows 2000)
Button
Buttons
Button
Button
All Images
Transfers and saves all images to the
computer.
New Images
Transfers and saves to the computer only the
images that have not been previously
transferred.
DPOF Trans. Images
Transfers and saves to the computer only the
images with DPOF Transfer Order settings.
Select & Transfer
Transfers and saves single images to the
computer as you view and select them.
Wallpaper
Transfers and saves single images to the
computer as you view and select them. The
transferred images display as the background
on the computer desktop.
Getting Started
Downloading Images Using the Camera
(Direct Transfer)
Getting Started
30
Downloading Images to a Computer
1. Confirm that the Direct Transfer menu is displayed on
the camera’s LCD monitor.
• The
button will light blue.
• Press the MENU button if the Direct
Transfer menu fails to appear.
Direct Transfer Menu
„ All Images/New Images/DPOF Trans. Images
2. Use the
or
press the
button to select
button.
,
or
and
• The images will download. The
button will blink blue while
downloading is in progress.
• The display will return to the Direct
Transfer menu when the download is
complete.
• To cancel the download, press the
FUNC./SET button.
„ Select & Transfer/Wallpaper
2. Use the or button to select
the
button.
3. Use the
or
and press the
or
and press
button to select images to download
button.
• The images will download. The
button will blink blue while
downloading is in progress.
• Pressing the FUNC./SET button will
cancel a download in progress.
Downloading Images to a Computer
button after downloading finishes.
You will return to the Direct Transfer menu.
Only JPEG images can be selected for downloading as
wallpaper for a computer.
The option selected with the
button is retained even
when the camera’s power is turned off. The previous setting will
be in effect the next time the Direct Transfer menu is displayed.
The image selection screen will appear directly when the
[Select & Transfer] or the [Wallpaper] option was last selected.
Click [×] at the bottom right of the window to close the CameraWindow
and the downloaded images will display on the computer.
„ Windows
ZoomBrowser EX
„ Macintosh
ImageBrowser
Under default settings, images downloaded to your computer are
stored to folder according to date of shooting.
Getting Started
4. Press the
31
Getting Started
32
System Map
System Map
Supplied with
Camera
Interface Cable
IFC-400PCU*1
Wrist Strap
WS-200
Memory Card
(16MB)
AA Alkaline
Batteries (×2)
Battery and Charger Kit
CBK4-300*5
„ Battery Charger CB-5AH/
CB-5AHE
„ AA-size NiMH batteries
NB-3AH (×4)
• NiMH Battery NB4-300
(set of 4 AA-size) also
available separately.
• Two batteries are used for
this camera.
Canon Digital Camera
Solution Disk
AV Cable AVC-DC300*1
AC Adapter Kit
ACK800
„ Compact Power Adapter
CA-PS800
„ Power Cord
System Map
33
Getting Started
High-Power Flash
HF-DC1
Direct Interface Cable*2
PCMCIA
Adapter
Direct Print Compatible
Inkjet Printers*4
USB Card
Reader
Compact Photo
Printers*2*3
(SELPHY series)
SD Memory Card*6
• SDC-128M
• SDC-512MSH
USB Port
PC Card Slot
Windows/Macintosh
Video IN Terminal
Audio IN Terminal
*1
*2
*3
*4
TV/Video
Also available for purchase separately.
See the user guide supplied with the printer for more information on the printer.
This camera can also be connected to the CP-10/CP-100/CP-200/CP-300.
See the user guide supplied with the inkjet printer for more information on the printer
and interface cables.
*5 Battery and Charger Kit CBK4-200 can also be used.
*6 Not sold in some regions.
Getting Started
34
System Map
Optional Accessories
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer
be available.
„ Flash
• High-Power Flash HF-DC1
This supplementary flash can be attached to your camera when a
photographic subject is too distant for the built-in flash to illuminate.
„ Power Supplies
• AC Adapter Kit ACK800
This kit lets you power the camera from any standard household
power outlet. Recommended to power a camera for an extended
period of time or when connecting to a computer.
• Battery and Charger Kit CBK4-300
This dedicated battery charger kit includes both a charger unit and
four rechargeable AA-size NiMH (nickel metal hydride) batteries.
Convenient when taking or playing back large numbers of images.
• NiMH Battery NB4-300
A set of four rechargeable AA-size NiMH batteries.
(Two batteries are used for this camera.)
System Map
35
• SD Memory Card
SD memory cards are used to store images recorded by the camera.
Canon brand cards are available in 128 MB and 512 MB capacities.
• Interface Cable IFC-400PCU
Use this cable to connect the camera to a computer, Compact Photo
Printer (SELPHY series), or to an inkjet printer (refer to your inkjet
printer user guide).
• AV Cable AVC-DC300
Use this cable to connect the camera to a TV set.
Direct Print Compatible Printers
Canon offers the following separately sold printers for use with the
camera. You can produce photo quality prints quickly and easily by
connecting them to the camera with a single cable and operating the
camera’s controls.
• Compact Photo Printers (SELPHY series)
• Inkjet Printers
For more information, visit your nearest Canon retailer.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when
used with genuine Canon accessories. Canon shall not be liable for
any damage to this product and/or accidents such as fire, etc.,
caused by the malfunction of non-genuine Canon accessories (e.g.,
a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of
non-genuine Canon accessories, although you may request such
repairs on a chargeable basis.
Getting Started
„ Other Accessories
Getting Started
36
37
W
Learning More
38
Components Guide
Components Guide
„ Front View
a Microphone (p. 150)
b Flash (p. 65)
c Speaker
d Date Battery Holder (p. 191)
e AF-assist Beam (p. 47)
f Red-Eye Reduction Lamp (p. 93)
g Self-Timer Lamp (p. 67)
h Lens
Components Guide
39
„ Back View
a LCD Monitor (p. 51)
b Terminal Cover
c Wrist Strap Mount (p. 9)
d Battery Cover Lock (pp. 8, 10)
e Memory Card Slot / Battery Cover (pp. 8, 10)
f Tripod Socket
g DC IN (Power Input) Terminal (p. 188)
h DIGITAL Terminal (p. 26)
i A/V OUT (Audio/Video output) Terminal (p. 161)
The LCD monitor may be covered with a thin plastic film for
protection against scratches during shipment. If so, remove the
film before using the camera.
40
Components Guide
„ Controls
a bc e
d
n
f
g
h
o
p
q
i
r
m l k j
a Power Lamp
b ON/OFF Button (p. 12)
c Mode Dial (pp. 14, 18)
d Zoom Lever
e
f
g
h
i
j
k
l
m
(pp. 60, 133, 134)
Shooting:
(Wide Angle)/
(Telephoto)
Playback:
(Index)/
(Magnify)
Shutter Button (p. 15)
Indicator (p. 43)
(Playback) Button (p. 17)
FUNC./SET (Function/Set)
Button (p. 44)
(Exposure)/
(Single
Image Erase) Button
(pp. 114, 21)
MENU Button (p. 45)
DISP. Button (p. 51)
(Face Selector) Button
(p. 101)
(Print/Share) Button
(pp. 22, 29, 154)
n
o
p
q
r
(Macro)/
(Manual
Focus)/
Button
(pp. 66, 105)
/
(Jump)/
Button
(pp. 110, 138)
(Flash)/
Button (p. 65)
(Continuous)/
(Selftimer)/
Button
(pp. 91, 67)
Control Dial (p. 41)
Components Guide
41
Using the Control Dial
Turning the control dial counterclockwise is equivalent to pressing the
button, while turning the control dial clockwise is equivalent to
pressing the
button (it is equivalent to pressing the
or
button
with some functions).
You can perform the following operations when you turn the control
dial.
When this arrow is displayed,
operation is carried out using
the control dial.
„ The Shooting Functions
•
•
•
•
•
•
•
•
•
•
•
Selecting Special Scene modes (p. 75)
Selecting / / / /ISO (pp. 65 – 67, 91, 110)
Selecting the FUNC. menu item (p. 46)
Selecting the movie mode (p. 79)
Selecting the shooting direction in Stitch Assist mode (p. 83)
Selecting a shutter speed in
(p. 86)
Selecting an aperture value in
(p. 88)
Selecting the shutter speed and the aperture value in
(p. 90)
Moving the AF frame in Face Detect mode (p. 101)
Adjusting the focus in manual focus mode (p. 105)
Adjusting the exposure (p. 114)
„ The Playback Functions
• Selecting an image in playback mode (pp. 17, 133, 134, 138, 144,
149)
• Operating when viewing movies (p. 139)
• Operating the sound memos (p. 150)
• Operating DPOF print settings and transfer settings (pp. 154, 159)
„ The Shooting and Playback Functions
• Selecting a menu item (pp. 44, 45)
42
Components Guide
Button
You can turn the camera on or off and switch between shooting
mode and playback mode.
ON/OFF button
Shutter Button
Button
Power Off
Shooting Mode
Press the ON/OFF
button.
Press the
Press the ON/OFF button.
button.
Press the shutter
button halfway.
Press the
button.
Playback Mode
Playback Mode
Lens retracted*
Lens extended
* You can change the lens retraction timing in [Lens Retract] in the
menu (p. 49).
(Set up)
Components Guide
43
Indicators
The indicators on the back of the camera will light or blink under the
following conditions.
Green:
Blinking Green:
Ready to shoot (camera beeps twice*)
Image recording/reading/erasing/transferring (when
connected to a computer)
Orange:
Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
* When the camera cannot focus, it beeps twice.
Never do the following while the indicator blinks green. These
actions may corrupt image data.
- Shake or jolt the camera
- Shut off the power, or open the memory card slot/battery
cover
Power Saving Function
This camera is equipped with a power saving function. The power will
shut off in the following circumstances. Press the ON/OFF button again
to restore power.
Shooting Mode
Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor automatically turns off 1 minute* after
the last control is accessed even if [Auto Power
Down] is set to [Off]. (Press any button other
than the ON/OFF button or change the camera
orientation to turn the LCD monitor back on.)
Playback Mode
Powers down approximately 5 minutes after the
Connected to a Printer last control is accessed on the camera.
* This time can be changed.
z The power saving function will not activate during an Auto
Play or while the camera is connected to a computer.
z The power saving function settings can be changed (p. 49).
44
Basic Operations
Basic Operations
Menus and Settings
Settings for the shooting or playback modes or such camera settings
as the print settings, date/time and sounds are set using the FUNC.
menu or the Rec., Play, Print or Set up menu.
„
Button (FUNC. Menu)
This menu sets many of the common shooting functions.
1
2
5
3
4
• This example shows the FUNC.
menu in
mode.
1
2
3
4
5
Set the mode dial to the shooting mode you
want to use.
Press the
Use the
button.
or
button to select a menu item.
• Some items may not be selectable in some shooting modes.
Use the
or
button to select an option for
the menu item.
• You can change the settings for options indicated with
using the DISP. Button.
• After selecting an option, you can press the shutter button to
shoot immediately. After shooting, this menu will appear again,
allowing you to adjust the settings easily.
• You can also use the control dial to select an option for the
menu item.
Press the
button.
Basic Operations
45
Button (Rec., Play, Print and Set up Menus)
„
Convenient settings for shooting, playback or printing can be set with
these menus.
(Rec.) Menu
(Set up) Menu
1
5
2
You can switch between
menus with the
or
button.
3
• This example shows the Rec. menu in
1
2
3
4
5
Press the
Use the
4
mode.
button.
or
button to switch between menus.
• You can also use the zoom lever to switch between menus.
• The following menus are displayed.
- Shooting:
Rec. /
Set up
- Playback:
Play /
Print /
Set up
Use the
or
button to select a menu item.
• Some items may not be selectable in some shooting modes.
• You can also use the control dial to select a menu item.
Use the
or
button to select an option.
Menu items followed by an ellipsis (...) can only be set after
pressing the FUNC./SET button to display the next menu. Press
the FUNC./SET button again to confirm the setting, then press
the MENU button to return to the menu screen.
Press the
button.
46
Basic Operations
Menus and Default Settings
See Functions Available in Each Shooting Mode.
FUNC. Menu
The icons shown here indicate the default settings (factory settings).
Menu Item
Reference
Page
Reference
Page
White Balance
p. 116
Compression
(Still image)
p. 70
My Colors
p. 119
Recording Pixels
(Still image)
p. 69
+/– (Flash) /
Flash Output
p. 121
Recording Pixels
(Movie)
p. 82
Metering Mode
p. 115
Menu Item
Rec. Menu
*Default setting
Menu Item
Options
Contents/
Reference Page
AF Frame
Face Detect*/Center
(The default setting is Center in p. 98
,
,
and
modes.)
AF Frame Size
Normal*/Small
p. 100
Digital Zoom
(Still image)
Standard*/Off/1.6x/2.0x
(Movie)
Standard*/Off
(In standard movie mode only)
p. 61
Slow Synchro
On/Off*
p. 94
Flash Adjust
Auto*/Manual
p. 121
Red-Eye
On*/Off
p. 93
Safety FE
On*/Off
p. 124
Basic Operations
Menu Item
Options
Contents/
Reference Page
Self-timer
Delay
0 – 10*, 15, 20, 30 sec.
Shots
1 – 10 (Default is 3 shots)
Safety Shift
On/Off*
Auto ISO Shift
p. 67
p. 89
Button/On/Off*
p. 111
MF-Point Zoom
On*/Off
p. 105
Safety MF
On*/Off
p. 106
AF Mode
Continuous/Single*
p. 97
AF-assist Beam
On*/Off
p. 38
Off/2*–10 seconds/Hold
You can set the
length of time
images display
after being shot
(p. 16).
Off*/Detailed/Focus Check
p. 95
(Still image)
Off*/Grid Lines/3:2 Guide/Both
p. 127
(Movie)
Off*/Grid Lines
Review
Review Info
Disp. Overlay
IS Mode
(Still image)
(Movie)
p. 73
Continuous*/Off
Date Stamp
Set
Continuous*/Shoot Only/
Panning/Off
button
Off*/Date/Date & Time
*/
/
/
/
/
47
p. 72
p. 125
48
Basic Operations
Play Menu
Print Menu
Reference
Page
Menu Item
Auto Play
p. 143
Menu Item
Print
Red-Eye Correction p. 144
Select Image & Qty.
Resize
p. 149
Select All Images
Sound Memo
p. 150
Clear All Selections
Protect
p. 152
Print Settings
Rotate
p. 141
Erase all
p. 153
Transfer Order
p. 159
Transition
p. 142
Set up Menu
Menu Item
Reference
Page
p. 154
*Default setting
Options
Contents/Reference Page
Mute
On/Off*
Set to [On] to silence all operation
sounds except for the warning sounds.
Volume
Off/1/2*/3/4/5
Adjusts the volume of the start-up
sound, operation sound, self-timer
sound, shutter sound and playback
sound. The volume cannot be
adjusted if [Mute] is set to [On].
Start-up Vol.
Adjusts the volume of the start-up
sound when the camera is turned on.
Operation Vol.
Adjusts the volume of the operation
sound that beeps when any button
other than the shutter button is
pressed.
Selftimer Vol.
Adjusts the volume of the self-timer
sound played 2 sec. before the shutter
is released.
Shutter
Volume
Adjusts the volume of the sound
played when the shutter releases. The
shutter sound does not play when a
movie is recording.
Basic Operations
Menu Item
Options
Playback Vol.
49
Contents/Reference Page
Adjusts the playback volume of
movies and sound memos.
Start-up Image
On*/Off
Sets whether or not the Start-up
Image appears when the camera is
powered on.
LCD Brightness
–7 to 0* to +7
Use the
or
button to adjust the
brightness.
You can check the brightness while
you are adjusting the setting.
Auto Power
Down
On*/Off
Sets whether or not the camera
automatically powers down after a set
period of time elapses without the
camera being operated.
Display Off
10 sec./20 sec./ Sets the length of time before the LCD
30 sec./1 min.*/ monitor turns off when no camera
2 min./3 min.
operation is performed.
Power Saving
p. 43
Date/Time
p. 12
Format
You can also select a low level format
(p. 59).
File Numbering
Continuous*/
Auto Reset
Create Folder
p. 131
p. 129
Create New
Folder
Check mark
Creates a folder during the next
(On)/
shooting session.
No check mark
(Off)
Auto Create
Off*/Daily/
MondaySunday/
Monthly
You can also set an auto creation
time.
Auto Rotate
On*/Off
p. 128
Distance Units
m / cm* /
ft / in
Sets the units for the zoom bar and
MF indicator distance unit (p. 105).
Lens Retract
1 minute*/
0 seconds
Sets the lens retraction timing when
switching from shooting mode to
playback mode.
50
Basic Operations
Menu Item
Options
Language
Contents/Reference Page
p. 13
Video System
NTSC/PAL
p. 161
Print Method
Auto*/
See below.
Reset All
p. 58
Print Method
The connection method with the printer can be changed for printing. Although it is
normally not necessary to change the setting, select
when borderless printing
an image shot in
(Widescreen) mode on wide size paper using Canon
compact photo printer SELPHY CP750/CP740/CP730/CP720/CP710/CP510/
CP520. As this setting will be stored to memory even when the power is turned
off, to print using an image size other than
, return the mode to [Auto]
(however, the connection method cannot be changed while connected to a
printer).
Basic Operations
51
Using the LCD Monitor
1
Press the
button.
• The display mode changes as follows with each press.
Shooting Mode (
Standard
(No Information)
Detailed
(Information View)
)
Playback Mode (
No Information
)
Standard
Detailed
Focus Check
(Still image only)
• The shooting information displays for approximately 6 sec. when a
setting is changed, regardless of the selected display mode.
The LCD monitor will not switch to the Detailed display or Focus
Check display while in Magnified display (p. 133) or index
playback (p. 134) mode.
52
Basic Operations
LCD Monitor Brightness
The brightness of the LCD monitor can be changed in the following two
ways.
• Changing settings using the Set up menu (p. 48)
• Changing settings using the Quick-bright LCD function
You can set the LCD monitor to the brightest setting regardless of the
option selected in the Set up menu by pressing the DISP. button for
more than one second*.
• To restore the previous brightness setting, press the DISP. button
for more than one second again.
• The next time you turn on the camera, the LCD monitor will be at
the brightness setting selected in the Set up menu.
* You cannot change the brightness of the LCD monitor with this function if you have
already set it to its highest setting in the Set up menu.
Night Display
When shooting at dusk or during the evening when the dark
surroundings make it difficult to view the LCD monitor, the camera’s
“night view” option* displays the subject brightly in the LCD monitor.
This will allow you to compose a shot even in dark environments (this
setting cannot be turned off).
* Although noise may appear and the movement of the subject shown on the LCD
monitor may appear somewhat jagged, there is no effect on the recorded image.
The brightness of the image displayed in the monitor, and the brightness of the
actual image recorded will be different.
Basic Operations
53
Information Displayed on the LCD Monitor
Shooting Information (Shooting Mode)
3:2 Guide
b
Spot AE Point Frame/
AF Frame
a
Grid Lines
c
d
ISO Speed
a
(
…
p. 110
White Balance
p. 116
My Colors
p. 119
Flash Exposure
Compensation/Flash Output
p. 121
Metering Mode
p. 115
Compression (Still image)
p. 70
Recording Pixels (Still image)
p. 69
Recording Pixels (Movies)
Digital Tele-Converter/
Safety Zoom
p. 82
1.6x/2.0x
Flash
b
)*
p. 61
p. 65
Drive Mode
pp. 91, 67
Auto Rotate
p. 128
Shooting Mode
p. 75
Low Battery
Movie Recording
(Red)
[z Rec] (Red)
p. 182
pp. 18, 79
Zoom Bar
pp. 60, 62
MF Indicator
p. 105
54
Basic Operations
Image Stabilizer
p. 73
Create Folder
p. 129
c Stills: Recordable Shots
Movies: Remaining Time/Elapsed Time
Camera Shake Warning
(Red)*
pp. 199,
200
p. 18
pp. 107,
109
AE Lock/FE Lock
Shutter Speed
15 – 1/2500*
pp. 86, 90
Aperture Value
f/2.8 – f/11*
pp. 88, 90
d Exposure Shift Bar
Exposure Compensation
p. 81
…
p. 114
AF Lock/Manual Focus
pp. 104,
105
Macro
p. 66
* Displays when the shutter button is pressed halfway. During flash photography,
however, the camera automatically readjusts the ISO speed, shutter speed or
aperture setting to an optimal setting, which may cause the playback information to
differ from the displayed information.
If the indicator blinks orange and
is displayed, this indicates
that a slow shutter speed may have been selected due to
insufficient illumination. Use the following methods to shoot:
- Set the IS mode to any setting other than [Off] (p. 73)
- Raise the ISO speed (p. 110)
- Set the Auto ISO Shift to any setting other than [Off] (p. 111)
- Raise the flash to enable
or
(p. 65)
- Attach the camera to a tripod or other device
Basic Operations
55
Playback Information (Playback Mode)
„ Standard
a
b
Displayed image number/Total number of images
—
pp. 129,
131
a Folder Number-File Number
Low Battery
(Red)
p. 182
Compression (Still Images)
p. 70
Recording Pixels (Still Images)
p. 69
Movie
p. 17
pp. 144,
149
b Red-Eye Corrected/Resized
WAVE Format Sound
p. 150
Protection Status
p. 152
Shooting Date/Time
—
„ Detailed
a
Histogram (p. 57)
Shooting Mode
a
p. 75
56
Basic Operations
Recording Pixels/
Frame Rate (Movies)
p. 82
Metering Mode
p. 115
…
ISO Speed
p. 110
Shutter Speed
15 – 1/2500
pp. 86, 90
Aperture Value
f/2.8 – f/11
…
pp. 88, 90
Exposure Compensation
Flash Exposure
Compensation
p. 114
…
p. 121
a Flash Output
p. 123
White Balance
p. 116
My Colors
p. 119
Red-Eye Correction Function
p. 144
AF Lock/Manual Focus
pp. 104,
105
Macro
p. 66
File size
Recording Pixels (Still Image)
Movie Length (Movies)
pp. 199,
200
„ Focus Check Display
a
b
a Folder Number-File Number
b
–
Compression (Still Images)
p. 70
Recording Pixels (Still Images)
p. 69
The Focus Check display cannot be selected for movies.
Basic Operations
57
The following information may also be displayed with some images.
A sound file in a format other than the WAVE format is attached or
the file format is not recognized.
JPEG image not conforming to Design rule for Camera File System
Standards.
RAW image.
Image recording pixel setting not recognized.
z Information for images shot on other cameras may not
display correctly.
z Overexposure Warning
In the following cases, overexposed portions of the image
blink.
- When reviewing an image right after shooting in the LCD
monitor (information view)
- When using the detailed display mode of the playback
mode
Histogram Function
The histogram is a graph that allows you to check the brightness of
the image. The greater the bias toward the left in the graph, the
darker the image. The greater the bias toward the right, the brighter
the image. If the image is too dark, adjust the exposure
compensation to a positive value. Similarly, adjust the exposure
compensation to a negative value if the image is too bright (p. 114).
Sample Histograms
Dark Image
Balanced Image
Bright Image
58
Basic Operations
Resetting Settings to Their Default Values
1
Select [Reset All].
1. Press the
button.
2. Use the
or
button to select the
menu.
3. Use the
or
button to select
[Reset All].
4. Press the
button.
2
Accept the setting.
1. Use the
or
button to select
[OK].
2. Press the
button.
z Settings cannot be reset when the camera is connected to a
computer or to a printer.
z The following cannot be reset.
- Shooting mode
- The [Date/Time], [Language] and [Video System] options
in the
menu (pp. 49, 50)
- White balance data recorded with the custom white
balance function (p. 117)
Basic Operations
59
Formatting Memory Cards
You should always format a new memory card or one from which you
wish to erase all images and other data.
Please note that formatting (initializing) a memory card erases
all data, including protected images and other file types.
1
Select [Format].
1. Press the
button.
2. Use the
or
button to select the
menu.
3. Use the
or
button to select
[Format].
4. Press the
button.
2
Accept the setting.
1. Use the
or
button to select
[OK].
2. Press the
button.
• To perform a low level format, use
the
button to select [Low Level
Format] and the
or
button to
add a check mark.
• You can stop formatting a memory card when [Low Level
Format] is selected by pressing the FUNC./SET button. You
can still use a memory card without problem when formatting is
halted, but its data will be erased.
Low Level Format
We recommend you select [Low Level Format] when you think
that the recording/reading speed of a memory card has
dropped. A low level format may require 2 to 3 minutes with
some memory cards.
60
Commonly Used Shooting Functions
Commonly Used Shooting Functions
Shooting with the Optical Zoom
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
The zoom can be adjusted from 36 mm – 360 mm (focal length) in
35mm film equivalent terms. The zoom bar will display while you adjust
the zoom.
1
Press the zoom lever toward
or
.
•
•
Wide Angle: Zooms out from
the subject.
Telephoto: Zooms in on the
subject.
Focus range (rough guide)
Zoom bar
Commonly Used Shooting Functions
61
Using the Digital Zoom/
Digital Tele-Converter
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
*
: [Digital Tele-converter] cannot be set.
You can combine digital zoom with optical zoom when shooting.
The available shooting characteristics and focal lengths (35mm film
equivalent) are as follows:
Selection
Focal Length
Standard
36 – 1440 mm
Off
36 – 360 mm
1.6x
57.6 – 576 mm
2.0x
72 – 720 mm
Shooting Characteristics
Enables shooting at zoom factors of up to
40x with digital and optical zoom
combined. The
can only be set in the
standard mode.
Enables shooting without digital zoom.
Digital zoom is fixed at the selected zoom
factor, and the focal length shifts to
maximum telephoto. This enables a faster
shutter speed and less chance of camera
shake than a shot taken at the same angle
of view with [Standard] or [Off].
The digital zoom cannot be used in
(Widescreen) modes.
or
Shooting with the Digital Zoom
1
Select [Digital Zoom].
1. Press the
button.
2. In the
menu, use the
or
button to select [Digital Zoom].
(Postcard), or
62
2
Commonly Used Shooting Functions
Accept the setting.
1. Use the
or
[Standard].
2. Press the
3
button to select
button.
Press the zoom lever toward
and shoot.
• The combined digital and optical zoom setting will display in
the LCD monitor.
• The image may appear coarse depending upon the selected
recording pixels. The zoom factor appear in blue (p. 63).
• Press the zoom lever toward
to zoom out.
Focus range (rough guide)
Optical zoom (White)
Digital zoom (Yellow/Blue)
Approximately
2 seconds
later
Combined optical and
digital zoom
Commonly Used Shooting Functions
63
Safety Zoom Zone
• Depending on the number of recording pixels set, you can zoom
without pausing up to a factor where the image quality does not
deteriorate (Safety Zoom) (except in the movie mode). The
icon
displays when reaching the maximum zoom factor without image
deterioration. At this point, the image can be further magnified by
pressing the zoom lever toward
(telephoto) again.
• Depending on the number of recording pixels set, the Safety Zoom
zone varies as follows. The color of the zoom bar on the LCD
monitor means as follows:
Safety Zoom Factor
Recording pixels
Optical zoom
Digital zoom
L (3264×2448)
M1 (2592×1944)
M2 (2048×1536)
M3 (1600×1200)
S (640×480)
The color of the zoom bar
White (
)
Yellow (
Zone without deterioration
)
Blue (
)
Zone with deterioration
64
Commonly Used Shooting Functions
Shooting with the Digital Tele-Converter
The digital tele-converter feature uses digital zoom to achieve the
effects of a tele-converter (a lens used in telephoto shooting).
1
Select [Digital Zoom].
1. Press the
button.
2. In the
menu, use the
or
button to select [Digital Zoom].
2
Accept the setting.
1. Use the
or
button to select
[1.6x] or [2.0x].
2. Press the
button.
3
Adjust the angle of view
with the zoom lever and
shoot.
•
and the zoom factor will appear
on the LCD monitor.
• The image may appear coarse
depending upon the selected
recording pixels (the
icon and the
zoom factor appear in blue).
Digital Tele-Converter
Zoom Factor
Commonly Used Shooting Functions
65
Using the Flash
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Cannot be set in
1
Raise the flash manually.
2
Press the
mode.
button.
1. Use the
or
button to change
the flash mode.
: [Auto]
: [On]
3
When you are not using the
flash, lower the flash until it
closes.
•
(flash off) appears in the LCD
monitor.
You are recommended to shoot with the camera attached to a
tripod or other device if the camera shake warning icon
appears.
When the flash recharging begins after shooting, the indicator
blinks orange and the LCD monitor turns off. When recharging
ends, the indicator turns off and the LCD monitor turns on. The
time required for flash recharging will change depending on
usage conditions and remaining battery power.
66
Commonly Used Shooting Functions
Shooting Close-ups (Macro)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Cannot be set in
mode.
Use this mode to shoot close-ups of flowers or small items. The image
area at the minimum shooting distance from the end of the lens to the
subject (1 cm) is 29 × 21 mm.
1
Press the
button.
1. Use the
or
button to select
.
• The zoom bar will display while you
adjust the zoom. At zoom ranges not
possible for macro photography, the
bar will appear yellow and the
icon will gray out. Although the
shutter button can be pressed at this
point, the image will be recorded at
standard shooting distances.
To Cancel the Macro Mode:
Press the
button and use the
or
Zoom bar
button to select
Yellow bar
(Normal).
Using the flash in macro mode may cause image edges to
darken.
67
Commonly Used Shooting Functions
Using the Self-Timer
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Cannot be set in
mode.
You can set the time delay and the numbers of shots you wish to take
in advance.
10 sec. Self-Timer: shoots 10 seconds after you press the
shutter button.
• 2 seconds before the shutter releases, the self-timer lamp and
sound speed up.
2 sec. Self-Timer: shoots 2 seconds after you press the shutter
button.
• The self-timer sound beeps quickly when you press the shutter
button and the shutter releases 2 seconds later.
Custom Timer: you can change the delay time (0 – 10, 15, 20, 30
sec.) and number of shots (1 – 10).
• When [Delay] is set to 2 or more seconds, the self-timer sound
beeps quickly 2 seconds before the shutter releases.
1
Press the
1. Use the
or
the option.
2
button.
button to change
Shoot.
• When the shutter button is pressed fully, the self-timer will
activate and the self-timer lamp will blink (when using red-eye
reduction, it will stay lit for the last 2 seconds).
To Cancel the Self-Timer:
Follow procedure 1 to display
.
68
Commonly Used Shooting Functions
Changing the Delay Time and Number of Shots (
1
Select [Self-timer].
1. Press the
button.
2. In the
menu, use the
or
button to select [Self-timer].
3. Press the
button.
2
Accept the setting.
1. Use the
or
button to select
[Delay] or [Shots] and change the
settings with the
or
button.
2. Press the
button.
3. Press the
button.
If the [Shots] option is set to 2 or more shots, the following
occurs.
- The exposure and white balance are locked at the settings
selected for the first shot.
- If the flash is used, the interval between shots lengthens
because the flash must charge.
- The interval between shots may lengthen when the built-in
memory of the camera fills.
- Shooting will automatically cease if the memory card
becomes full.
)
Commonly Used Shooting Functions
69
Changing the Recording Pixels (Still Images)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
1
Select setting.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to change the
option.
3. Press the
button.
Approximate Values for Recording Pixels
Recording Pixels
Large
8M
3264 × 2448
Medium 1
5M
2592 × 1944
Medium 2
3M
2048 × 1536
Medium 3
2M
1600 × 1200
0.3M
640 × 480
Small
*2 or
Postcard
*2
*2
Widescreen
Purpose*1
High Printing to about A3-size
297 × 420 mm (11.7 × 16.5 in.)
Printing to about A4-size
210 × 297 mm (8.3 × 11.7 in.)
Printing to about Letter-size
216 × 279 mm (8.5 × 11 in.)
Printing to about A5-size
148 × 210 mm (6 × 8.3 in.)
Print postcard-size prints
148 × 100 mm (6 × 4 in.)
Print L-size prints
119 × 89 mm (4.7 × 3.5 in.)
Send images as e-mail
Low attachments or shoot more images
1600 × 1200
When printing to postcards (p. 71).
3264 × 1832
Printing on wide size paper (you can
check the composition at a 16:9
aspect ratio. Areas that will not be
recorded appear on the LCD monitor
as a black border.)
:Approximate recording pixel numbers are shown. (M is short for megapixels.)
*1 Paper sizes vary according to region.
*2 Cannot be set in
mode.
70
Commonly Used Shooting Functions
Changing the Compression
(Still Images)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
1
Select a compression
setting.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to change the
option.
3. Press the
button.
Approximate Values for Compression Settings
Compression
Superfine
Shoot normal quality images
Fine
Normal
Purpose
High Quality Shoot higher quality images
Normal
Shoot more images
z See Memory Cards and Estimated Capacities (p. 199).
z See Image Data Sizes (Estimated) (p. 200).
Commonly Used Shooting Functions
71
Configuring the Postcard Mode
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can shoot images with the optimal settings for postcards by
composing them inside the print area (width-to-height ratio of
approximately 3:2) shown in the LCD monitor.
1
Select
.
1. Press the
button.
2. Use the
or
button to select
and choose
with the
or
button.
3. Press the
button.
• The area that will not print displays in
gray.
• Approximately 2M recording pixels,
and compression settings are fixed to
(Fine).
The digital zoom or the digital tele-converter cannot be used in
this mode.
For printing instructions, refer to the Direct Print User Guide.
72
Commonly Used Shooting Functions
Embedding the Date in the Image Data
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can embed the date in the image data when
selected.
1
Select
(Postcard) is
.
1. Press the
button.
2. Use the
or
button to select
and choose
with the
or
button.
3. Press the
button.
2
Select [Date Stamp].
1. Press the
button.
2. In the
menu, use the
or
button to select [Date Stamp].
3
Set the date and time.
1. Use the
or
button to select
[Date] or [Date & Time].
2. Press the
button.
• LCD Monitor Display
[Off]:
[Date]/[Date & Time]:
z Ensure that the camera’s date/time is set beforehand (p. 12).
z The date stamp cannot be deleted from the image data once
it has been embedded.
Commonly Used Shooting Functions
73
To imprint the date on images for all but
, use the supplied
software (ZoomBrowser EX or ImageBrowser) or printer
settings. For details, please see the user guide for each
product.
Setting the Image Stabilizer Function
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Can only be set to [Continuous].
The lens shift image stabilizer function allows you to minimize the
camera shake effect (blurred images) when you shoot distant subjects
that have been magnified or when you shoot in dark conditions without
a flash.
Off
1
Turns off the image stabilizer function.
You can check the effect of the IS mode on image blur
on the LCD monitor since the IS mode runs continually.
Continuous
This makes it easier to compose images and focus on
subjects.
Shoot Only IS mode is only activated when the shutter
button is pressed. When set to [Continuous], some
blurring may occur depending on the subjects. In Shoot
Shoot Only
Only mode, subjects can be taken without concern for
any unnatural movement that may appear on the LCD
monitor.
This option only stabilizes the effect of up and down
Panning camera motions on the image. This option is
recommended for shooting objects moving horizontally.
Select [IS Mode].
1. Press the
button.
2. In the
menu, use the
button to select [IS Mode].
or
74
2
Commonly Used Shooting Functions
Accept the setting.
1. Use the
or
button to select
[Continuous], [Shoot Only], [Panning]
or [Off].
2. Press the
button.
z Camera shake may not be fully corrected when shooting
with slow shutter speeds, such as with evening shots.
Switch the Auto ISO Shift (p. 111) to a setting other than
[Off], or use a tripod to shoot.
z If camera shake is too strong, it may not be fully corrected.
z Hold the camera horizontally while panning (stabilization
does not work when the camera is held vertically).
z If you select [Shoot Only] or [Panning] in shooting mode (still
images) and then switch to
mode, the setting will change
to [Continuous]. (If you further switch to a different shooting
mode from
, the settings will change back to the original
condition.)
Shooting Using the Mode Dial
75
Shooting Using the Mode Dial
Mode Dial
Creative zone
Auto
Image zone
„ Auto
The camera automatically selects settings (p. 14).
„ Image zone
When a shooting mode appropriate for the shooting conditions is
selected, the camera automatically adjusts settings for optimal
shooting (p. 76).
:
:
:
:
:
Portrait
Landscape
Night Snapshot
Kids&Pets
Special Scene (p. 76)
: Night Scene
: Indoor
: Foliage
: Snow
: Beach
: Fireworks
: Aquarium
: Stitch Assist (p. 83)
: Movie (Standard/Compact) (pp. 18, 79)
„ Creative zone
With these settings, you select parameters such as the shutter speed
or aperture stop to achieve a range of effects.
:
:
:
:
Program AE (p. 85)
Setting the Shutter Speed (p. 86)
Setting the Aperture (p. 88)
Manually Setting the Shutter Speed and Aperture (p. 90)
76
Shooting Using the Mode Dial
Shooting Modes for Specific Scenes
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
When a shooting mode appropriate for the shooting conditions is
selected, the camera automatically adjusts settings for optimal
shooting.
1
Set the mode dial to
.
,
,
or
Portrait
Produces a soft effect when photographing people.
Landscape
Optimized for shooting landscape scenes which
contain both near and far subjects.
Night Snapshot
Allows you to take snapshots of people against
twilight or night backgrounds by reducing the effects
of camera shake even without using a tripod.
Kids&Pets
Allows you to capture subjects that move around,
such as children and pets, without missing photo
opportunities.
Shooting Using the Mode Dial
77
(Special Scene)
You can shoot with the most appropriate settings for the scene.
1
Set the mode dial to
2
Select a shooting mode.
.
1. Use the control dial to select a
shooting mode.
Night Scene
Allows you to capture people against the backdrop
of an evening sky or night scene. The flash is
directed at the person and the shutter speed is slow,
so both the person and the background can be
beautifully shot.
Indoor
Prevents camera shake and maintains the subject’s
true color when shooting under fluorescent or
tungsten lighting.
Foliage
Shoots trees and leaves—such as new growth,
autumn leaves or blossoms—in vivid colors.
78
Shooting Using the Mode Dial
Snow
Shoots without a blue tinge and without making
people appear dark against a snowy background.
Beach
Shoots without making people appear dark near
water or sand where reflected sunlight is strong.
Fireworks
Captures fireworks in the sky sharply and at optimal
exposure.
Aquarium
Selects the optimal ISO speed, white balance and
color balance to capture fish and other items in an
indoor aquarium.
z The shutter speed is slow in
or
mode. Always use a
tripod to avoid camera shake.
z In
,
,
or
mode, the ISO speed may increase
and cause noise in the image depending on the scene being
shot.
Shooting Using the Mode Dial
79
Movie Shooting
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
The following movie modes are available.
The recording time will vary according to the capacity of the memory
card you use (p. 200).
Standard
You can select the recording pixels and record until the memory card
is full (when a super high-speed memory card is used, such as the
recommended SDC-512MSH). The digital zoom can be used while
shooting in this mode. (p. 60)
• Maximum Size: 4 GB*
Compact
Since there are few recording pixels and also the data size is small,
this mode is convenient for sending movies as e-mail attachments or
when the memory card capacity is low.
• Maximum Clip Length: 3 minutes
* Even if the clip size has not reached 4 GB, recording will stop at the moment the clip
length reaches 1 hour. Depending on the volume and data writing speed of the
memory card, recording may stop before reaching 1 hour or before the recorded data
volume has reached 4 GB.
1
Set the mode dial to
2
Select a shooting mode.
.
1. Use the control dial to select a movie
mode.
80
3
Shooting Using the Mode Dial
Shoot.
• Pressing the shutter button halfway automatically sets the
exposure, focus and white balance settings.
• Pressing the shutter button fully starts recording video and
sound simultaneously.
• During shooting, the recording time and [zRec] appear on the
LCD monitor.
• Pressing the shutter button fully again stops recording.
Recording will stop automatically under the following
circumstances.
- When the maximum recording time or maximum size
elapses
- When the built-in memory or memory card becomes full
z You are recommended to use a memory card that has been
formatted in your camera to shoot movies (p. 59). The
memory card supplied with the camera may be used without
further formatting.
z Be careful of the following while recording.
- Do not touch the microphone (p. 38).
- If you press a button, the sound of the button being
pressed will also be recorded.
- The camera will automatically adjust the exposure and
white balance to suit the shooting conditions during
recording. Please note, however, that the sounds made
by the camera automatically adjusting the exposure may
also be recorded.
z The focus and optical zoom settings remain fixed for
subsequent frames at the values selected for the first frame.
Shooting Using the Mode Dial
81
z You can set the AE lock and exposure shift while shooting
movies. This is effective on ski slopes and the beach when
the contrast is too strong between the subject and
background or where there are both light and dark areas in
the scene and it is desirable to adjust the exposure.
1 Press the
button.
The exposure will lock (AE lock) and the exposure shift bar
will appear in the LCD monitor.
2 Use the control dial to adjust the exposure.
Press the
button again to release the setting. Also,
the setting will be canceled if you press the
button or
change the white balance, My Colors, or shooting mode
settings.
z QuickTime is required to play back movies (Data type: AVI/
Compression method: Motion JPEG) on a computer (Only
Windows 2000).
82
Shooting Using the Mode Dial
Changing Movie Recording Pixels
You can change the recording pixels when the movie mode is set to
(Standard) (frame rate is fixed).
1
Select the number of
recording pixels.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to
change the option.
3. Press the
button.
Recording Pixels and Frame Rates
Frame rates indicate the number of frames recorded or played back
each second. The higher the frame rate, the smoother the
appearance of motion.
Standard
*1
640 × 480 pixels, 30 frames/sec.
*2
640 × 480 pixels, 30 frames/sec. LP
320 × 240 pixels, 30 frames/sec.
Compact
160 × 120 pixels, 15 frames/sec.
*1 Default setting.
*2 To give priority to recording length over quality, select the option displaying
(Long Play). For the same file size, you can record approximately twice the
length.
z See Memory Cards and Estimated Capacities (p. 199).
z See Image Data Sizes (Estimated) (p. 200).
Shooting Using the Mode Dial
83
Shooting Panoramic Images (Stitch Assist)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Stitch Assist can be used to shoot overlapping images that can later be
merged (stitched) to create one panoramic image on a computer.
The overlapping seams of several
adjacent images can be joined
into a single panoramic image.
1
Set the mode dial to
2
Select a shooting direction.
1. Use the control dial to select a
shooting sequence.
Left to right horizontally
Right to left horizontally
.
84
3
Shooting Using the Mode Dial
Shoot the first image in the
sequence.
• The exposure and white balance are
set and locked with the first image.
4
Compose the second image so that it overlaps
a portion of the first and shoot.
• You can press the
or
button to return to the previously
recorded image to retake the shot.
• Minor discrepancies in the overlapping portions can be
corrected when the images are stitched together.
5
Repeat the procedure for additional images.
• A sequence may contain up to 26 images.
6
Press the
button after taking the last shot.
z You cannot display the images on a TV when shooting in
Stitch Assist mode.
z The settings for the first image are applied to the second
image onward.
z Use PhotoStitch, a supplied software program, to merge the
images on a computer.
z When the
button is pressed, you can switch between the
items which you can set.
- Exposure compensation/Shooting direction selection
Shooting Using the Mode Dial
85
Program AE
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
The camera automatically sets the shutter speed and aperture value to
match the brightness of the subject. You can freely configure such
settings as the ISO speed, exposure compensation and white balance.
1
Set the mode dial to
2
Shoot.
.
When a correct exposure cannot be obtained, the shutter
speed and aperture values are shown in red on the LCD
monitor when the shutter button is pressed halfway. Use the
following shooting methods to obtain the correct exposure and
make them show in white.
- Using the flash (p. 65)
- Changing the ISO speed (p. 110)
- Changing the metering method (p. 115)
86
Shooting Using the Mode Dial
Setting the Shutter Speed
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
When you set the shutter speed, the camera automatically selects an
aperture value to match the brightness of the subject. Faster shutter
speeds allow you to catch an instantaneous image of a moving
subject, while slower speeds create a flowing effect and allow you to
shoot without a flash in dark areas.
1
Set the mode dial to
2
Configure the shutter speed.
.
1. Use the control dial to change the
shutter speed.
Shutter speed
3
Shoot.
• If the aperture value is shown in red, the image is
underexposed (insufficient light) or overexposed (too much
light). Use the control dial to adjust the shutter speed until the
aperture value shows in white (Safety Shift (p. 89)).
The nature of CCDs is such that noise in the recorded image
increases at slow shutter speeds. This camera, however,
applies special processing to images shot at shutter speeds
slower than 1.3 seconds to eliminate the noise, thereby
producing high-quality images. (However, a certain amount of
processing time may be required before the next image can be
shot.)
Shooting Using the Mode Dial
87
z The aperture value and shutter speed change according to
the zoom state as follows:
Maximum
Wide Angle
Maximum
Telephoto
Aperture
Value
Shutter Speed
(seconds)
f/2.8 – 3.5
15 – 1/1600
f/4.0 – 5.0
15 – 1/2000
f/5.6 – 8.0*
15 – 1/2500
f/4.3 – 5.6
15 – 1/1600
f/6.3 – 8.0*
15 – 1/2000
* Depending on the shooting conditions, the aperture value can increase to
f/11 in
.
z The fastest shutter speed for flash synchronization is 1/500
second. Therefore, even if the shutter speed is preset to a
speed higher than 1/500 second, the camera automatically
resets the shutter speed to 1/500 second during shooting.
Shutter Speed Display
z The following shutter speeds can be set. 1/160 indicates
1/160 second. Also, 0"3 indicates 0.3 second and
2" indicates 2 seconds.
15" 13" 10" 8" 6" 5" 4" 3"2 2"5 2" 1"6 1"3 1" 0"8 0"6 0"5 0"4 0"3
1/4 1/5 1/6 1/8 1/10 1/13 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/125 1/160 1/200 1/250 1/320 1/400 1/500 1/640
1/800 1/1000 1/1250 1/1600 1/2000 1/2500
88
Shooting Using the Mode Dial
Setting the Aperture
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
The aperture adjusts the amount of light entering through the lens.
When you set the aperture value, the camera automatically selects a
shutter speed to match the brightness.
Selecting a lower aperture value (opening the aperture) allows you to
blur the background and create a beautiful portrait. A higher aperture
value (closing the aperture) brings the entire range from foreground to
background into focus. The larger the aperture value, the greater the
range of the image brought into clear focus.
1
Set the mode dial to
2
Configure the aperture
setting.
.
1. Use the control dial to change the
aperture value.
Aperture value
3
Shoot.
• If the shutter speed is shown in red, the image is
underexposed (insufficient light) or overexposed (too much
light). Use the control dial to adjust the aperture value until the
shutter speed shows in white (Safety Shift (p. 89)).
Some aperture values may not be available with certain zoom
positions (p. 90).
Shooting Using the Mode Dial
89
z The maximum shutter speed with synchronized flash is 1/500
seconds. Therefore, even if an aperture value is preset, the
aperture value may automatically be reset to match the
synchronized flash speed.
Aperture Value Display
z The larger the aperture value, the smaller the lens aperture.
F2.8 F3.2 F3.5 F4.0 F4.3 F4.5 F5.0 F5.6 F6.3 F7.1 F8.0
Safety Shift
With
and
modes, if [Safety Shift] is turned [On] (p. 47) in the
menu, the shutter speed or aperture value is automatically
adjusted for the correct exposure when it cannot be otherwise
obtained. Safety Shift is disabled when the flash is enabled.
90
Shooting Using the Mode Dial
Manually Setting the Shutter Speed
and Aperture
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can manually set the shutter speed and aperture to shoot images.
1
Set the mode dial to
2
Configure the shutter speed and aperture
setting.
.
1. Use the
button to select shutter speed or aperture.
2. Use the control dial to change the shutter speed or aperture
value.
3
Shoot.
• When you press the shutter button
halfway, the difference between the
Correct exposure* and the selected
exposure appears on the LCD
monitor. If the difference is more
than ±2 stops, “–2” or “+2” appears in
red.
* Correct exposure levels are calculated by measuring light according to the
currently selected metering mode.
z If the zoom is adjusted after these values are set, the shutter
speed or aperture value may change in accordance with the
zoom position (p. 88).
z The LCD monitor’s brightness matches the selected shutter
speed and aperture value. When you select a fast shutter
speed or shoot a subject in a dark place, the image will
always be bright if the flash is set to
(Flash on).
Various Shooting Methods
91
Various Shooting Methods
Continuous Shooting
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
In this mode, the camera shoots continuously while the shutter button
is held down. If you use the recommended memory card*, you can
shoot continuously (smooth continuous shooting) at a set shooting
interval until the memory card is full (p. 199).
*Recommended Memory Card:
Super high-speed SDC-512MSH Memory Card (sold separately) to
which low-level formatting (p. 59) is conducted immediately before
shooting.
•
(Large/Fine) mode.
• This reflects standard shooting criteria established by Canon. Actual results may
vary according to the subject and shooting conditions.
• Even if continuous shooting suddenly stops, the memory card may not be full.
Continuous
You can shoot
Approx.
continuously at a short
1.3 images/sec. shooting interval.
Focus
while
shooting
Display on
the LCD
monitor
Fixed*
Recorded
image
Continuous
Shooting AF
Approx.
0.8 images/sec.
The camera will continue
to record successive
images and focus while
the shutter button is held
down (except in manual
focus mode).
Auto focus Subject
right before
shooting
Continuous
Shooting LV
(Live View)
Approx.
0.8 images/sec.
You can shoot
continuously with a
manually set focus
position while confirming
the subject.
Fixed*
Subject
right before
shooting
* The focus position of first image is fixed.
92
1
Various Shooting Methods
Press the
1. Use the
or
or
.
2
button.
button to select
,
Shoot.
• The camera will continue to record successive images while
the shutter button is held down.
Recording will cease when the shutter button is released.
To Cancel Continuous Shooting:
Follow procedure 1 to display
.
z
is not displayed in
mode (
can be selected).
z AF frame will be set to [Center] in
mode (p. 98).
z Rec. Review (p. 16) will not be displayed in
and
modes.
z The interval between shots lengthens when the built-in
memory of the camera fills.
z If the flash is used, the interval between shots lengthens
because the flash must charge.
93
Various Shooting Methods
Setting the Red-Eye Reduction Function
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Cannot be set in
mode.
This function reduces the red appearance of the eyes which results
when the eyes reflect light back from the flash.
1
Select [Red-Eye].
1. Press the
button.
2. In the
menu, use the
button to select [Red-Eye].
2
or
Accept the setting.
1. Use the
or
or [Off].
2. Press the
button to select [On]
button.
When [On] is selected, the Red-Eye Reduction Lamp lights
orange before the flash fires.
94
Various Shooting Methods
Setting the Slow Synchro Function
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can shoot with the flash at slow shutter speeds. When shooting at
night or under artificial indoor lighting, this function reduces the effect
of background darkening when the flash fires.
1
Select [Slow Synchro].
1. Press the
button.
2. In the
menu, use the
or
button to select [Slow Synchro].
2
Set Slow Synchro.
1. Use the
or
or [Off].
2. Press the
button to select [On]
button.
z This will be fixed to [On] in the
and
modes, and
,
and
modes in the
mode.
z Please note that camera shake becomes a factor when [Slow
Synchro] is set to [On]. If this occurs, you are recommended
to fix the camera to a tripod to shoot in this mode.
Various Shooting Methods
95
Checking the Focus and Peoples’
Expressions (Focus Check)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Allows you to check the focus of an image taken. It is also easy to
check peoples’ expressions and look for closed eyes because a frame
the size of the face displays when AF frame mode is set to [Face
Detect] to shoot.
You are recommended to set [Review] to [Hold] in the
menu
(p. 47) in advance.
1
Select [Review Info].
1. Press the
button.
2. In the
menu, use the
or
button to select [Review Info].
2
Accept the setting.
1. Use the
or
button to select
[Focus Check].
2. Press the
button.
96
3
Various Shooting Methods
Shoot.
• The recorded image will be displayed.
• Frames are displayed as follows.
Frame color
Content
Orange
Displays the area of the image shown at the bottom
right.
White
Displays at the focal point (AF frame).
• The orange frame can be shown at a Recorded Image
different magnification, moved or
switched to a different frame
(pp. 136, 137).
Orange frame contents
To Cancel the Focus Check:
Press the shutter button halfway.
z When [Review Info] is set to any setting other than [Focus
Check], the Focus Check screen will display by pressing the
button in the Rec. Review mode immediately after
shooting.
z Pressing the
button while the image is displayed will erase
the image (p. 21).
z You can check the focus even during playback mode
(p. 135).
Various Shooting Methods
97
Switching between Focus Settings
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* In
mode only [Single] is available.
You can set the AF mode.
Single
The camera only focuses when the shutter button is pressed
halfway, conserving battery power.
The camera is continually focusing on whatever it is aimed
Continuous at even when the shutter button is not pressed, allowing you
to shoot without missing opportunities.
1
Select [AF Mode].
1. Press the
button.
2. Use the
or
button to select
[AF Mode] in the
menu.
2
Accept the setting.
1. Use the
or
button to select
[Continuous] or [Single].
2. Press the
button.
98
Various Shooting Methods
Selecting an AF Frame Mode
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Cannot be set in
mode.
The AF frame indicates the area of the composition on which the
camera focuses. You can set the AF frame in the following ways.
Face
Detect
You can have the camera automatically
detect the position of a face and use this data
to set the focus and exposure* while shooting.
In addition, the camera will meter the subject
so that the face is correctly illuminated when
the flash fires. If a face is not detected,
shooting will take place with [Center].
* Only in evaluative metering mode (p. 115).
Center
1
The camera fixes the AF frame at the center.
This is convenient for making sure the focus is
exactly where you want it.
Select [AF Frame].
1. Press the
button.
2. In the
menu, use the
or
button to select [AF Frame].
2
Accept the setting.
1. Use the
or
button to select
[Face Detect] or [Center].
2. Press the
button.
• Changing the AF frame size (p. 100).
Various Shooting Methods
99
The AF frame appears as follows when the shutter button is
pressed halfway.
- Green
: In focus
- Yellow
: Focusing difficulty ([Center] option)
- No AF frame : Focusing difficulty ([Face Detect] option)
Face Detect Feature
z Maximum of three AF frames will be displayed at the position of the
face the camera recognizes. At this point, the frame the camera
judges to be the main subject appears in white while the others
appear in gray. When the shutter button is pressed halfway and the
camera focuses, up to 9 green AF frames may appear.
z The camera will shoot using [Center] not the [Face Detect] function
if a white frame fails to appear and only gray frames display, or if a
face is not detected.
z The camera may mistakenly identify non-human subjects as a face.
In this case, select [Center].
z In certain cases, faces may not be detected.
Examples:
- If faces are at the edge of the screen, or appear extremely small,
large, dark or bright, relative to the overall composition.
- Faces turned to the side or at a diagonal, or faces with a portion
hidden.
100
Various Shooting Methods
Changing the AF Frame Size ([Center] selected)
Shooting Mode
You can change the AF frame size to match a subject.
You reduce the area used to set the focus when you reduce the AF
frame to match a small subject or to focus on a particular portion of a
subject.
1
Select [AF Frame Size].
1. Press the
button.
2. In the
menu, use the
or
button to select [AF Frame Size].
2
Accept the setting.
1. Use the
or
button to select
[Normal] or [Small].
2. Press the
button.
The setting is configured to [Normal] when the digital zoom,
digital tele-converter or manual focus mode (p. 105) is used.
101
Various Shooting Methods
Selecting a Subject to Focus On
(When [Face Detect] Is Selected)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Cannot be set in
mode.
Once the focus is fixed to a subject’s face, the frame can be set to
follow the subject (Face Select and Track).
1
Select a face you wish to focus on.
1. When a face is detected, press the
button.
• The camera enters face
Face Frame
designation mode, and the face
frame (
) of the main subject
displays in green. Even if the
subject moves, the frame will
follow the subject within a certain
range.
2. Select the person you wish to focus
on.
• When several faces have been detected, pressing the
or
button or turning the control dial will move the face frame
to another subject.
• The face frame will not display when a face is not detected.
When the AF frame mode is set to [Center],
will display
in green in the center of the monitor.
• Holding down the DISP. button will
Face Frame
display face frames (up to 35) of
all the detected faces (green: face
of main subject, white: detected
faces).
• The MENU button and
button cannot be used.
102
Various Shooting Methods
3. Press the
button again.
• The camera exits face designation
mode, and the face frame (
) of
the main subject will change to
white. The frame will continue to
follow the subject within a certain
range.
• You can make shooting function
settings in the FUNC. menu.
2
Press the shutter button halfway.
• The face frame (
3
) of main subject will change into
.
Press the shutter button all the way to shoot.
To Cancel the Face Select Mode:
Press the
button more than one second in Step 1.
z In the following cases, the face select mode will be
canceled.
- When turning the power back on.
- Using the digital zoom or digital tele-converter.
- When the MENU button is pressed to display the menu.
- When a selected face cannot be tracked for several
seconds.
z When the AF frame mode is set to [Center], you cannot
select faces while using the digital zoom.
103
Various Shooting Methods
Shooting Hard-to-Focus Subjects
(Focus Lock, AF Lock, Manual Focus, Safety MF)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Cannot be used in
mode.
It may be difficult to focus on the following types of subjects.
• Subjects with extremely low contrast to the surroundings
• Scenes with a mixture of near and far subjects
• Subjects with extremely bright objects at the center of the composition
• Subjects that are moving quickly
• Subjects through glass: Try to shoot as close to the glass as possible
to reduce the chances of light reflecting back off the glass.
Shooting with the Focus Lock
1
2
3
Aim the camera so that an object at the same
focal distance as the main subject is centered
in the viewfinder or in the AF frame displayed
on the LCD monitor.
Press the shutter button halfway to lock the
focus.
Keep the shutter button pressed halfway while
you recompose the image and press the
shutter button all the way to shoot the image.
104
Various Shooting Methods
Shooting with the AF Lock
* Not available in
or
mode.
1
Aim the camera so that an object at the same
focal distance as the main subject is centered
in the AF frame.
2
Press and hold the shutter button halfway and
press the
button.
•
3
and MF Indicator will be displayed to confirm the distance
from the subject.
Re-aim the camera to compose the shot as
desired and shoot.
To Release the AF Lock:
Press the
button and use the
(Normal).
or
button to select
z Since AF frames do not display in
mode, aim the camera
so that the focus is on the target subject.
z When shooting with the focus lock or AF lock using the LCD
monitor, setting [AF Frame] to [Center] (p. 98) makes
shooting easier since the camera focuses using the center
AF frame only.
z The AF lock is convenient because you can let go of the
shutter button to compose the image. Moreover, the AF lock
is still effective after the picture is taken, allowing you to
capture a second image with the same focus.
105
Various Shooting Methods
Shooting in Manual Focus Mode
The focus can be manually set.
* Not available in
1
Press the
or
mode.
button.
1. Use the
or
button to select
.
and the MF indicator are
• The
displayed.
• When the
menu’s [MF-Point
Zoom] is set to [On], the portion of
the image in the AF frame will appear
magnified*.
* The image will not appear magnified in
mode, when the digital
zoom or digital tele-converter is activated or when a TV is used as the
display.
* Can also be set so that the image displayed is not magnified (p. 47).
• Depending on the shooting mode, pressing the
switch between the setting items as follows:
,
,
,
,
button will
Exposure compensation/
mode/Exposure compensation/
mode/
Shutter speed/Exposure compensation/
Aperture value/Exposure compensation/
Shutter speed/Aperture value/
2
Use the control dial and
adjust the focus.
MF indicator
• The MF indicator shows approximate
figures. Use them as a shooting
guideline only.
To Cancel the Manual Focus:
Press the
button and use the
(Normal).
or
button to select
106
Various Shooting Methods
You cannot change the AF frame setting while focusing
manually. Cancel the manual focus mode, then change the AF
frame setting.
Using the Manual Focus in Combination with
the Auto Focus (Safety MF)
First, manual focus is used to roughly focus, then from that focus
position the camera automatically focuses more accurately.
* Not available in
1
or
mode.
Select [Safety MF].
1. Press the
button.
2. In the
menu, use the
or
button to select [Safety MF].
2
Accept the setting.
1. Use the
or
or [Off].
2. Press the
3
button to select [On]
button.
First focus manually and then press the
shutter button halfway.
• The focus will be fine-tuned at the optimal point of focus.
4
To shoot, press the shutter button all the way
down (press fully).
Various Shooting Methods
107
Locking the Exposure Setting (AE Lock)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can set the exposure and focus separately. This is effective when
the contrast is too strong between the subject and background or when
a subject is backlit.
1
Confirm that the flash is lowered.
•
is displayed.
2
Aim the camera at the subject on which you
wish to lock the exposure.
3
Press the shutter button halfway and press the
button.
• The exposure setting will lock and
4
will display.
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the AE Lock:
Operate a button other than the
or
button.
z You can also set or release the AE lock (p. 81).
z You can use the FE lock when using the flash (p. 109).
108
Various Shooting Methods
Changing the Shutter Speed and Aperture Value
Combination
The automatically selected combinations of shutter speeds and
aperture values can be freely changed without altering the exposure
to shoot images (Program Shift).
1
Aim the camera at the subject on which you
wish to lock the exposure.
2
Press the shutter button
halfway and press the
button.
• The exposure setting will lock, and
will appear on the LCD
monitor.
3
Use the control dial to change shutter speed
and aperture valve combinations.
4
Recompose the image and shoot.
• The setting will cancel after the shot is taken.
Various Shooting Methods
109
Locking the Flash Exposure Setting
(FE Lock)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
1
2
Raise the flash.
3
Aim the camera at the subject on which you
wish to lock the exposure.
4
Press the shutter button halfway and press the
button.
In
mode, press the
(flash on).
• The flash will pre-fire and
5
button and select
will display.
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the FE Lock:
Operate a button other than the control dial.
The FE lock cannot be used when [Flash Adjust] is set to [Off].
110
Various Shooting Methods
Adjusting the ISO Speed
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Raise the ISO speed to use a fast shutter speed when you wish to
reduce the effects of camera shake or avoid blurry subjects, or to turn
the flash off when shooting in a dark area.
Shooting
Mode
ISO Speed
Auto
{*
High ISO Auto
{
ISO 80
–
ISO 100
–
ISO 200
–
ISO 400
–
ISO 800
–
ISO 1600
–
{:Available *:Default
1
{*
{
{
{
{
{
{
{
{*
–
{
{
{
{
{
{
{*
–
{
{
{
{
{
{
–
–
{*
{
{
{
{
{
Adjust the ISO Speed.
1. Press the
button.
2. Use the
or
buttons to change
the setting.
• Selecting
(Auto) puts priority on
image quality in setting the optimal
ISO speed for the light level when shooting. As the ISO speed
will automatically be raised in dark places, shutter speed will
increase, reducing camera shake and subject blurring.
• Selecting
(High ISO Auto)* sets a higher speed than for
. As the shutter speed becomes even faster, camera shake
and blurred photos caused by subject movement will be
reduced even more than when shooting the same scene in
.
* Noise may increase in the captured image compared to
.
Various Shooting Methods
111
z The camera automatically applies noise reduction processing
when you shoot at a high ISO speed.
z If the camera is set at
or
, the ISO speed automatically
set by the camera will be displayed when pressing the
shutter button halfway or in playback information.
Reducing Camera Shake When Shooting
(Auto ISO Shift)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
When the camera shake warning icon ( ) appears during shooting,
this function allows you to increase ISO speed and to shoot at a shutter
speed which minimizes the effects of camera shake.
Off
This function is not used.
button
On
Allows you to confirm the ISO speed and
shutter speed before and after adjustment in
the LCD monitor while shooting.
The ISO speed is automatically adjusted to an
optimal setting which minimizes camera shake.
z In
,
or
mode, it will not function when the flash fires.
z Depending on shooting conditions, the camera shake
warning icon ( ) may continue to display even if the ISO
speed is increased.
1
Select [Auto ISO Shift].
1. Press the
button.
2. In the
menu, use the
or
button to select [Auto ISO Shift].
112
2
Various Shooting Methods
Accept the setting.
1. Use the
or
button to select
[
button], [On] or [Off].
2. Press the
button.
„ Shooting ([
3
button] is Selected)
Press the shutter button
halfway.
• When
is displayed, the
button lights in blue.
4
Press and hold the shutter
button halfway, then press
the
button.
• The ISO speed after adjustment is
displayed.
• While pressing the shutter button
halfway, pressing the
button
again will return the ISO speed to its original condition.
• When the AE lock (p. 107) is activated after the ISO speed is
raised, the ISO speed will not return to its original setting even
if you release the shutter button.
5
Press the shutter button all the way down
(press fully).
Various Shooting Methods
113
„ Shooting ([On] is Selected)
3
Press the shutter button
halfway.
• The ISO speed is automatically set
to an optimal setting which minimizes
camera shake.
4
Press the shutter button all the way down (press fully).
114
Various Shooting Methods
Adjusting the Exposure Compensation
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Adjust the exposure compensation to a positive value to avoid making
the subject too dark when it is backlit or shot against a bright
background. Adjust the exposure compensation to a negative value to
avoid making the subject too bright in night shots or when shot against
a dark background.
1
Press
to display the exposure
compensation bar.
2
Configure the setting.
1. Use the control dial to adjust the
exposure compensation.
2. Press the
button.
• Depending on the shooting mode, pressing the
switch between the setting items as follows:
button will
mode/Exposure compensation
Sequence Direction Selection/Exposure compensation
Shutter speed/Exposure compensation
Aperture value/Exposure compensation
To Cancel the Exposure Compensation:
Follow step 2 to restore the compensation value to [0].
Various Shooting Methods
115
Switching between Metering Modes
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
1
Evaluative
Appropriate for standard shooting conditions,
including backlit scenes. The camera divides
images into several zones for metering. It
evaluates complex lighting conditions, such as
the position of the subject, the brightness, the
direct light, and the backlighting, and adjusts
the settings to the correct exposure for the
main subject.
Center Weighted
Avg.
Averages the light metered from the entire
frame, but gives greater weight to the subject
matter at the center.
Spot
Meters within the spot metering frame.
Change the metering mode.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to change the
option.
3. Press the
button.
116
Various Shooting Methods
Adjusting the Tone (White Balance)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Normally, the
(Auto) white balance setting selects an optimal white
balance. When the
setting cannot produce natural looking colors,
change the white balance using a setting appropriate for the light
source.
Auto
Day Light
For recording outdoors on a bright day.
Cloudy
For recording under overcast, shady or twilight skies.
Tungsten
Fluorescent
Fluorescent H
Custom
1
Settings are automatically set by the camera.
For recording under tungsten and bulb-type 3wavelength fluorescent lighting.
For recording under warm-white, cool-white or
warm-white (3-wavelength) fluorescent lighting.
For recording under daylight fluorescent, or daylight
fluorescent-type 3-wavelength fluorescent lighting.
For recording with the optimal white balance data
memorized in the camera from a white-colored
object, such as white paper or cloth.
Select a white balance
setting.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to change
the option.
3. Press the
button.
The white balance setting cannot be adjusted when
is selected for My Colors.
or
Various Shooting Methods
117
Using the Custom White Balance
Take a custom white balance
(Custom) reading for the following
(Auto) setting to detect correctly.
situations that are difficult for the
• Shooting close-ups (Macro)
• Shooting subjects of monotone color (such as sky, sea or forest)
• Shooting with a particular source of light (such as a mercury-vapor lamp)
1
Select
.
1. Press the
button.
2. Use the
or
button to select
and choose
with the
or
button.
2
Aim the camera at a piece
of white paper or cloth
and press
.
• If you are viewing it with the LCD
monitor, ensure that the center
frame is completely filled with the
white image. If you are using the
optical viewfinder, ensure that the entire field is filled.
Please note, however, that the center frame will not display
when the digital zoom is used or when
is displayed.
3
Press the
button.
118
Various Shooting Methods
z You are recommended to set the shooting mode to
and
the exposure compensation setting to [±0] before setting a
custom white balance. The correct white balance may not
be obtained when the exposure setting is incorrect (image
appears completely black or white).
z Shoot with the same settings as when reading the white
balance data. If the settings differ, the optimal white
balance may not be set. In particular, the following should
not be changed.
- ISO Speed
- Flash
Setting the flash to
or
is recommended. If the
flash fires when reading the white balance data with the
flash set to
, make sure that you also use the flash
when you shoot.
z Since the white balance data cannot be read in Stitch
Assist mode, preset the white balance in another shooting
mode beforehand.
z The white balance data is retained even after the camera
power is turned off.
Various Shooting Methods
119
Shooting in a My Colors Mode
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can change the look of an image when it is shot.
/
1
My Colors Off
Records normally with this setting.
Vivid
Emphasizes the contrast and color saturation to
record bold colors.
Neutral
Tones down the contrast and color saturation to
record neutral hues.
Sepia
Records in sepia tones.
B/W
Records in black and white.
Custom Color
Use this option to adjust contrast, sharpness and
saturation before shooting.
/
/
Select a My Colors setting.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to change
the option.
3. Press the
button.
2
Shoot.
120
Various Shooting Methods
(Setting the Custom Color Mode)
1
Select
.
1. Press the
button.
2. Use the
or
button to select
and choose
with the
or
button.
2
Adjust the setting.
1. Press the
button.
2. Use the
or
button to select
[Contrast], [Sharpness] or
[Saturation].
3. Use the
or
button to adjust the
setting.
Select an item
Adjust
• The adjustment results show in the LCD monitor.
• If you press the DISP. button, you will return to the screen
where you can select a My Colors mode.
3
Complete the setting.
1. Press the
button.
Various Shooting Methods
121
Switching between Flash Adjustment
Settings
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Although the built-in flash will fire with automatic flash adjustments, it is
also possible to set it so that it fires without any adjustments.
1
Select [Flash Adjust].
1. Press the
button.
2. In the
menu, use the
or
button to select [Flash Adjust].
2
Accept the setting.
1. Use the
or
button to select
[Auto] or [Manual].
• Flash compensation can be set to
[Manual] (p. 122).
• Flash output can be set to [Auto]
(p. 122).
2. Press the
button.
122
Various Shooting Methods
Adjusting Flash Compensation Settings
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Flash exposure compensation can be adjusted in the range of –2 to +2
stops in 1/3-stop increments. You can combine the flash exposure
compensation with the camera’s exposure compensation function for
balanced exposure of the background when doing flash photography.
In
and
shooting modes, please set [Flash Adjust] to [Auto].
1
Adjust the flash compensation setting.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to change the
option.
3. Press the
button.
Flash exposure
compensation
Various Shooting Methods
123
Setting the Flash Output
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
When shooting, the flash output can be controlled in three steps, up to
FULL.
In
and
shooting modes, please set [Flash Adjust] to [Manual].
1
Configure the flash output setting.
1. Press the
button.
2. Use the
or
button to select
and the
or
button to change the
option.
3. Press the
button.
Flash Output
124
Various Shooting Methods
Adjusting Exposure for Built-in Flash
Shooting (Safety FE)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
The camera automatically changes the shutter speed or aperture value
when the flash fires to avoid overexposing and blowing out the
highlights in the scene. In
or
shooting mode, Ensure that the
flash adjustment setting is configured to [Auto] in advance (p. 121).
1
Select [Safety FE].
1. Press the
button.
2. In the
menu, use the
or
button to select [Safety FE].
2
Accept the setting.
1. Use the
or
or [Off].
2. Press the
button to select [On]
button.
Various Shooting Methods
125
Registering Settings to the Print/
Share Button
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can register a function that you often use when shooting with the
(Print/Share) button. The following functions can be registered.
Menu Item
1
Page
Page
Not Assigned
—
Digital Tele-converter
p. 64
White Balance
p. 116
DISP. Overlay
p. 127
Custom White
Balance
p. 117
Display Off
p. 126
Select [Set
button].
1. Press the
button.
2. In the
menu, use the
button to select [Set
3. Press the
button.
2
Menu Item
or
button].
Accept the setting.
1. Use the
or
button to select the
function you wish to register.
2. Press the
button.
• If
displays to the icon’s lower
right, you can register the function,
but you cannot use it with some shooting modes or settings
even if you press the
button.
126
3
Various Shooting Methods
Press the
button.
To Cancel the Shortcut Button:
Select
in Step 2.
Using the
1
Press the
Button
button.
• For
and
, each time that the
button is pressed,
the settings of the registered functions are switched.
• For
, the corresponding setup screen is displayed.
• For
, each press of the
button records the white
balance data. Since the frame does not appear at this point,
ensure that the white paper or cloth is positioned so it appears
at the center of the LCD monitor and then press the
button. After using this function once, the white balance setting
changes to
.
• For
, pressing the
button turns off the LCD monitor.
The next time a button is pressed, the LCD monitor will turn
back on.
Various Shooting Methods
127
Setting the Display Overlays
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
* Only [Grid Lines] can be set.
You can display vertical and horizontal grid lines, a 3:2 print area
guide, or both on the LCD monitor while shooting to help check the
position of your subject.
Off
—
Grid Lines
Displays grid lines to divide the screen into 9 parts. Helps
confirm the vertical and horizontal positioning of the subject.
3:2 Guide
Helps confirm the print area for a 3:2 print.*
Areas outside the printable area are grayed out.
* Images are still recorded at the standard aspect ratio of 4:3.
Both
1
Displays both the grid lines and the 3:2 guide
simultaneously.
Select [Disp. Overlay].
1. Press the
button.
2. In the
menu, use the
or
button to select [Disp. Overlay].
2
Accept the setting.
1. Use the
or
button to select
[Off], [Grid Lines], [Both] or [3:2
Guide].
2. Press the
button.
z Only grid lines can be configured for the
or
mode.
z The grid lines and 3:2 guide will not be recorded in the
image.
128
Various Shooting Methods
Setting the Auto Rotate Function
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
Your camera is equipped with an Intelligent Orientation sensor that
detects the orientation of an image shot with the camera held vertically
and automatically rotates it to the correct orientation when viewing it in
the LCD monitor.
1
Select [Auto Rotate].
1. Press the
2. Use the
or
menu.
3. Use the
or
[Auto Rotate].
2
button.
button to select the
button to select
Accept the setting.
1. Use the
or
or [Off].
2. Press the
button to select [On]
button.
• When the Auto Rotate function is set
to [On] and the LCD monitor is set to
the detailed display mode in the shooting mode,
(normal),
(right end is down) or
(left end is down) will appear in
the display.
z This function may not operate correctly when the camera is
pointed straight up or down. Check that the arrow
is
pointing in the right direction and if it is not, then set the Auto
Rotate function to [Off].
z Even if the Auto Rotate function is set to [On], the orientation
of images downloaded to a computer will depend upon the
software used to download the images.
Various Shooting Methods
129
When the camera is held vertically to shoot, the Intelligent
Orientation sensor judges the upper end to be “up” and the
lower end to be “down”. It then regulates the optimal white
balance, exposure and focus for vertical photography. This
function operates regardless of the on/off status of the Auto
Rotate function.
Creating an Image Destination (Folder)
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
You can create a new folder at any time and the recorded images will
be automatically saved to that folder.
Create New
Folder
Creates a new folder the next time you shoot images. To
create an additional folder, insert the check mark again.
You can also specify a date and time if you wish to create
Auto Create a new folder using a shooting time after the specified date
and time.
Creating a Folder the Next Time You Shoot.
1
Select [Create Folder].
1. Press the
button.
2. Use the
or
button to select the
menu.
3. Use the
or
button to select
[Create Folder].
4. Press the
button.
130
2
Various Shooting Methods
Accept the setting.
1. Use the
or
button to check
mark [Create New Folder].
2. Press the
button two times.
•
will be displayed on the LCD
will
monitor when shooting.
disappear from the screen when a new folder is created.
Setting the Day or Time for Automatic Folder Creation.
1
Select [Create Folder].
1. Press the
button.
2. Use the
or
button to select the
menu.
3. Use the
or
button to select
[Create Folder].
4. Press the
button.
2
Accept the setting.
1. Use the
or
button to select
[Auto Create] and the
or
button
to select a creation date.
2. Use the
or
button to select
[Time] and the
or
button to
select a time.
3. Press the
button two times.
•
displays when the specified time arrives. The symbol will
cease to display after the new folder is created.
Up to 2000 images can be saved into one folder. A new folder
will automatically be created when you record more than that
number even if you are not creating new folders.
Various Shooting Methods
131
Resetting the File Number
See Functions Available in Each Shooting Mode (p. 208).
Shooting Mode
The images you shoot are automatically assigned file numbers. You
can select how the file number is assigned.
A number one higher than the last one recorded is assigned
to the next image. This is convenient for managing all your
images together on a computer because you avoid file name
Continuous duplication when changing folders or memory cards.*
* When a blank memory card is used. If a memory card with recorded
data is used, the 7-digit number for the last recorded folder and
image is compared with the last one on the memory card, and the
larger of the two is utilized as the basis for new images.
The image and folder number are reset to the starting value
(100-0001).* This is convenient for managing images on a
folder-by-folder basis.
Auto Reset * When a blank memory card is used. If a memory card with recorded
data is used, the number following the 7-digit number for the last
recorded folder and image on the memory card is utilized as the
basis for new images.
1
Select [File Numbering].
1. Press the
button.
2. Use the
or
button to select the
menu.
3. Use the
or
button to select
[File Numbering].
2
Accept the setting.
1. Use the
or
button to select
[Continuous] or [Auto Reset].
2. Press the
button.
132
Various Shooting Methods
File and Folder Numbers
Recorded images are assigned consecutive file numbers starting with
0001 and ranging up to 9999, while folders are assigned numbers
starting with 100 and ranging up to 999. Up to 2000 images can be
saved into a single folder.
New Folder Created
Memory Card Exchanged for
Another
Memory Card 1
Memory Card 1
Memory Card 2
Memory Card 1
Memory Card 1
Memory Card 2
Continuous
Auto Reset
• Images may be saved to a new folder when there is insufficient free
space even if the total number of images in a folder is less than 2000
because the following types of images are always saved together into
the same folder.
- Images from continuous shooting
- Self-timer images (custom)
- Stitch Assist mode images
• Images cannot be played back when the folder numbers are
duplicated or image numbers are duplicated within folders.
• Please refer to the Software Starter Guide for information regarding
folder structures or image types.
Playback/Erasing
133
Playback/Erasing
In playback mode, you can select images with the control dial. Turning
it counterclockwise selects the previous image while turning it
clockwise selects the next image. Please also see Viewing Still Images
(p. 17).
Magnifying Images
1
Press the zoom lever toward
.
• The image is magnified.
• Images can be magnified up to a
factor of 10x.
Approximate Location
of the Displayed Area
2
Use the ,
the image.
,
or
button to move around
• If you use the control dial while in the magnified display mode,
the camera will switch to the previous or next image at the
same level of magnification.
• You can change the magnification level with the zoom lever.
To Cancel the Magnified Display:
Press the zoom lever toward
. (You can also cancel it immediately
by pressing the MENU button.)
Movie frames and index playback images cannot be magnified.
134
Playback/Erasing
Viewing Images in Sets of Nine
(Index Playback)
1
Press the zoom lever
toward
.
Selected Image
• Up to nine images can be viewed at
once in index playback.
• Use the , ,
or
button to
change the image selection.
Movie
To Return to Single Image Playback:
Press the zoom lever toward .
Switching between Sets of Nine Images
The jump bar will display if you press the
zoom lever toward
while in index
playback and you can switch the display
between sets of nine images.
• Use the
or
button to move to the
previous or next set of 9 images.
• Hold the FUNC./SET button down and
press the
or
button to jump to the
first or last set.
To Return to Single Image Playback:
• Press the zoom lever toward .
Jump Bar
Playback/Erasing
135
Check the Focus and Facial Expressions
of Subjects (Focus Check Display)
Focus Check display allows you to check the focus of images taken.
Moreover, as you can change the display magnification and switch
images, you can easily check facial expressions and whether a
subject’s eyes are closed.
Displaying the Focus Check
1
Press the
button
several times until the
Focus Check displays.
• Frames are displayed on the image as follows.
Frame color
Orange
Content
Displays the range of the image displayed at
bottom right.
White
The frame is displayed at a position at which the
image is in focus.
Gray
Displays frames in positions where faces were
detected during playback.
• The orange frames allow you to change the display
magnification, move the display position, and switch between
display frames (pp. 136, 137).
When you are not using Focus Check display and playing back
images with detected faces, you can change the display
magnification by pressing the
button.
136
Playback/Erasing
Changing the Display Magnification
2
Press the zoom lever
toward .
• Screen bottom right will be displayed
prominently.
Switching Frames
2
Press the
button.
• When multiple faces are detected,
pressing the
button switches the
position of the orange frame.
Playback/Erasing
137
Changing the Display Position
2
Press the zoom lever
toward .
• Screen bottom right will be displayed
prominently.
3
Use the , , or button
to change the display
position.
• When multiple faces are detected,
each press of the
button
switches between the different
positions of the orange frames.
• When only one face is detected, pressing the
button will
return the orange frame to its original position.
• After you change the display magnification in a shot with
detected faces and press the
button, the orange frame will
adjust to the size of the face.
• When no faces are detected, pressing the FUNC./SET button
will return the orange frame to its original position.
To Return to Single Image Playback:
Press the MENU button.
138
Playback/Erasing
Jumping to Images
When you have many images recorded onto a memory card, it is
handy to use the five search keys below to jump over images to find
the object of your search.
1
Jump Shot Date
Jumps to the first image of each shooting
date.
Jump to Folder
Jumps to the first image of each folder.
Jump to Movie
Jumps to a movie.
Jump 10 Images
Jumps over 10 images at a time.
Jump 100 Images
Jumps over 100 images at a time.
In single image playback mode, press the
button.
• The camera will switch to jump search mode.
• The screen sample will vary slightly according to the search
key.
2
Use the
or
button to
select a search key and
press the
or
button.
Number of images
matching search key
Location of image currently
being displayed
To Return to Single Image Playback:
Press the MENU button.
Playback/Erasing
139
Viewing Movies
(Movie Replay Control Panel)
Movies cannot be played in the index playback mode.
1
Display the movie file.
1. Use the
or
button to select a
movie.
2. Press the
button.
• Images with a
icon are
movies.
• The Movie Control Panel is displayed.
2
Play the movie.
1. Use the
or
button to select
2. Press the
button.
Movie Control Panel
.
• The movie will pause if you press the
FUNC./SET button during playback.
It will resume when you press the
button again.
• When playback ends, the movie
Playback Progress Bar
stops at the last frame displayed.
Time movie was shot
Press the FUNC./SET button to
Volume Level
display the movie control panel.
(Adjust it with the
or
• You can switch between showing/
button)
hiding the playback progress bar by
pressing the DISP. button while playing a movie.
• If playback was halted partway through in the prior viewing
session, playback will resume from the last frame displayed.
140
Playback/Erasing
Operating the Movie Control Panel
Exit
Ends playback and returns to single image playback.
Print
An icon will display when a printer is connected. See
the Direct Print User Guide for details.
Play
Play
Slow Motion
You can use the
button to slow down or the
button to speed up playback.
First Frame
Displays the first frame.
Previous Frame Rewinds if the FUNC./SET button is held down.
Next Frame
Fast Forwards if the FUNC./SET button is held
down.
Last Frame
Displays the last frame.
z Use the television’s controls to adjust the volume when
playing a movie on a TV set (p. 161).
z The sound cannot be played in slow motion playback.
Playback/Erasing
141
Rotating Images in the Display
Images can be rotated clockwise 90° or 270° in the display.
Original
1
90°
270°
Select [Rotate].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Rotate].
3. Press the
button.
2
Rotate the image.
1. Use the
or
button to select an
image to rotate.
2. Press the
button.
• Cycle through the 90°/270°/original
orientations with each press of the
FUNC./SET button.
• This also can be set in the index playback mode.
When images are downloaded to a computer, the orientation of
images rotated by the camera will depend upon the software
used to download the images.
As the orientation of an image is recorded, the image will be
shown in its rotated orientation the next time it is displayed.
142
Playback/Erasing
Playback with Transition Effects
You can select the transition effect displayed when switching between
images.
No transition effect.
The displayed image darkens and the next image gradually brightens
until it is displayed.
Press the
and the
1
button to have the previous image display from the left
button to have the next image display from the right.
Select [Transition].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Transition].
2
Accept the setting.
1. Use the
or
button to select a
transition effect.
2. Press the
button.
Playback/Erasing
143
Automated Playback (Auto Play)
Use this feature to automatically play back all of the images in the
memory card. The LCD monitor displays each image for approximately
3 seconds.
1
Select [Auto Play].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Auto Play].
3. Press the
button.
• During automated playback, the
following functions are possible:
- Pausing/resuming the Auto Play: Press the FUNC./SET
button
- Fast forwarding/rewinding: Press the
or
button
(holding down the button will increase the speed of the Fast
Forward)
- Stopping: Press the MENU button
If Transition is selected (p. 142), the selected transition effects
appear between images.
144
Playback/Erasing
Red-Eye Correction Function
You can correct red eyes in recorded images.
Red eyes may not be automatically detected in some images
or the results may not turn out as you intended.
Examples:
- Faces near the screen edges or faces that appear extremely
small, large, dark or bright in relation to the overall image.
- Faces turned to the side or at a diagonal, or faces with a
portion hidden.
1
Select [Red-Eye Correction].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Red-Eye
Correction].
3. Press the
button.
2
Select an image.
1. Use the
or
button to select the
image you wish to correct red eyes.
2. Press the
button.
• A frame will automatically display
where a red-eye is detected.
• If red-eye is not automatically
detected, select [Add Frame] with
or
button and press
FUNC./SET button (p. 147).
• To cancel the correction frame, select [Remove Frame] and
press the FUNC./SET button (p. 148).
Playback/Erasing
3
Correct the image.
1. Use the
,
,
or
select [Start].
2. Press the
button.
4
145
button to
Save the image.
1. Use the
,
,
or
button to
select [New File] or [Overwrite].
2. Press the
button.
• [New File]: Saved as new file with a
new name. The uncorrected image is
stored. The new image is stored as
the last file.
• [Overwrite]: Saved with the same file name as the uncorrected
image. The uncorrected image is erased.
• When [New File] is selected, proceed to the procedure 5.
5
Display the saved image.
1. Press the
button.
2. Use the
or
button to select
[Yes].
3. Press the
button.
• Selecting [No] returns to the Play
menu.
z Red-eye correction cannot be performed on movies.
z Overwriting cannot be performed on protected images.
146
Playback/Erasing
z When there is not enough space left on the memory card,
red-eye correction cannot be performed.
z Although you can apply red-eye correction any number of
times to an image, the image quality will gradually deteriorate
with each application.
z Since the correction frame will not appear automatically on
images that have already been corrected once with the RedEye Correction function, use the [Add Frame] option to
correct them.
Playback/Erasing
147
Add Correction Frame
1
Select [Add Frame].
1. Use the
,
,
or
select [Add Frame].
2. Press the
button.
button to
• A green frame will display.
2
Adjust the position of the
correction frame.
1. Use the , ,
move the frame.
or
button to
• Size of the frame can be changed
with the zoom lever.
3
Add additional correction frames.
1. Press the
button.
• A correction frame is added and the frame color changes to
white.
• If you wish to add additional frames, adjust the position and
press the FUNC./SET button.
• Up to 35 additional frames can be added.
• To end the adding of correction frames, press the MENU
button.
To correctly perform red-eye correction, take note of the
following (refer to the image in step 2):
- Adjust the correction frame size so that it only surrounds
the red-eye portion to be corrected.
- When there are several subjects with red-eye, be sure to
add one correction frame per subject.
148
Playback/Erasing
Removing Correction Frames
1
Select [Remove Frame].
1. Use the , ,
or
button to
select [Remove Frame].
2. Press the
button.
2
Adjust the position of the
correction frame.
1. Use the
or
button to select a
frame to remove.
• The selected frame will appear in
green.
3
Delete the frame.
1. Press the
button.
• The selected frame will disappear.
• To continue deleting frames, repeat operations from step 2.
• When you finish deleting frames, press the MENU button.
Playback/Erasing
Resizing Images
You can resave images that were recorded at high recording pixel
settings at lower settings.
1600 × 1200 pixels
640 × 480 pixels
320 × 240 pixels
1
Select [Resize].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Resize].
3. Press the
button.
2
Select an image.
1. Use the
or
button to select an
image to resize.
2. Press the
button.
• The FUNC./SET button is not
selectable for images that cannot be
resized.
3
Select a resolution.
1. Use the
or
button to select
or
.
2. Press the
button.
,
• Some recording pixel settings cannot
be selected depending on the
available space of the memory card.
149
150
4
Playback/Erasing
Save the image.
1. Use the
or
button to select
[OK].
2. Press the
button.
• The resized image will be saved in a
new file.
• If you wish to continue resizing of
another image, repeat operations from step 2.
5
Display the saved image.
1. Press the
button.
2. Use the
or
button to select
[Yes].
3. Press the
button.
• Selecting [No] returns to the Play
menu.
and
mode cannot be resized.
Attaching Sound Memos to Images
In playback mode, you can attach sound memos (up to 1 min.) to an
image. The sound data is saved in the WAVE format.
1
Select [Sound Memo].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Sound Memo].
3. Press the
button.
Playback/Erasing
2
151
Select an image.
1. Use the
or
button to select an
image to which you wish to attach a
sound memo.
2. Press the
button.
• The sound memo control panel will
display.
3
Record the memo.
1. Use the
or
button to select
2. Press the
button.
.
• The elapsed time and the remaining
time display.
• Pressing the FUNC./SET button
pauses the recording. Pressing it
Sound Memo Panel
again resumes recording.
Elapsed Time/
Remaining Time
• Up to 1 minute of recordings can be
added to any one image.
Volume
(Adjust it with the
or
• Press the MENU button several
button)
times to complete the setting.
Sound Memo Panel
Use the
or
button to select an option and press FUNC./SET.
Exit
Returns to the playback screen.
Record
Starts recording.
Pause
Pauses recording or playback.
Play
Begins playback.
Erase
Erases sound memos. (Select [Erase] and in the
confirmation screen press the FUNC./SET button.)
z You cannot attach sound memos to movies.
z Sound memos for protected images cannot be erased.
152
Playback/Erasing
Protecting Images
You can protect important images and movies from accidental erasure.
1
Select [Protect].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Protect].
3. Press the
button.
2
Protect an image.
1. Use the
or
button to select an
image to protect.
2. Press the
button.
• Pressing the FUNC./SET button
again cancels the setting.
Protection Icon
• You can also protect images in the
index playback mode.
• Press the MENU button several times to complete the setting.
Playback/Erasing
153
Erasing All Images
You can erase images from a memory card.
z Note that erased images cannot be recovered. Exercise
adequate caution before erasing an image.
z Protected images cannot be erased with this function.
1
Select [Erase all].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Erase All].
3. Press the
button.
2
Erase the images.
1. Use the
or
button to select
[OK].
2. Press the
button.
• To exit instead of erasing, select
[Cancel].
Please format the memory card when you want to erase not
only image data but also all the data contained on the memory
card (p. 59).
154
Print Settings/Transfer Settings
Print Settings/Transfer Settings
Setting the DPOF Print Settings
You can select images on a memory card for printing and specify the
number of print copies in advance using the camera. The settings used
on the camera comply with the Digital Print Order Format (DPOF)
standards. This is extremely convenient for printing on a direct print
compatible printer, or for sending the images to a photo developing
service that supports DPOF.
The
icon may display for a memory card with print settings
set by a different DPOF-compliant camera. These settings will
be overwritten by those set by your camera.
Setting the Print Style
After setting the print style, select the images for printing. The following
settings can be selected.
* Default setting
Standard* Prints one image per page.
Print Type
Index
Both
Prints the selected images together at a
reduced size in an index format.
Prints the images in both the standard and
index formats.
Date (On/Off*)
Adds the date to the print.
File No. (On/Off*)
Adds the file number to the print.
Clear DPOF data (On*/Off) Clears all print settings after the images print.
Print Settings/Transfer Settings
1
155
Select [Print Settings].
1. Press the
button.
2. Press the
button.
3. Use the
or
button to select the
menu.
4. Use the
or
button to select
[Print Settings].
5. Press the
button.
2
Accept the setting.
1. Use the
or
button to select
[Print Type], [Date], [File No.] or
[Clear DPOF data].
2. Use the
or
button to select a
setting to configure.
3. Press the
button.
z The Date and File No. settings change according to the Print
Type as follows.
- [Index]
[Date] and [File No.] cannot be set to [On] at the same time.
- [Standard] or [Both]
[Date] and [File No.] can be set to [On] at the same time,
however, the printable information may vary between
printers.
z Printing more than two copies
1. Set [Print Type] in [Print Settings] to [Standard] or [Both].
2. Select [Select Images & Qty.], choose the image you wish
to print, and press the FUNC./SET button.
3. Use the
or
buttons to set the number of copies.
z Images dated using
(Postcard Date Imprint mode) (p. 72)
are always printed with the date, regardless of the [Date]
setting. As a result, some printers may print the date twice on
these images if [Date] is also set to [On].
z Dates print in the style specified in the [Date/Time] menu
(p. 12).
156
Print Settings/Transfer Settings
Single Images
1
Select [Select Images & Qty.].
1. Press the
button.
2. Press the
button.
3. Use the
or
button to select the
menu.
4. Use the
or
button to select
[Select Images & Qty.].
5. Press the
button.
• Selecting [Clear All Selections] cancels all print settings.
2
Select the images.
• Selection methods differ for the Print Type settings (p. 154).
Standard ( ) / Both (
)
1. Use the
or
button to select the
images.
2. Press the
button.
3. Use the
or
button to select the
number of print copies (up to 99).
4. Press the
button.
Number of Print Copies
• If the camera is connected to a
printer, the
button will light in blue while images are
being selected. At this time, press the
button, confirm
that [Print] is selected, and when the FUNC./SET button is
pressed, printing will begin.
Print Settings/Transfer Settings
Index ( )
1. Use the
or
button to select the
images.
2. Select and deselect with the
button.
3. Press the
button.
157
Index Print Selection
• You can also select images in the
index playback mode.
• If the camera is connected to a printer, the
button will
light in blue while images are being selected. At this time,
press the
button, confirm that [Print] is selected, and
when the FUNC./SET button is pressed, printing will begin.
All the Images on a Memory Card
1
Select [Select All Images].
1. Press the
button.
2. Press the
button.
3. Use the
or
button to select the
menu.
4. Use the
or
button to select
[Select All Images].
5. Press the
button.
• One copy of every image will be set to print.
• Selecting [Clear All Selections] cancels all print settings.
• When the camera is connected to a printer, the
button
will light blue. At this time, press the
button, confirm that
[Print] is selected, and when the FUNC./SET button is pressed,
printing will begin.
158
2
Print Settings/Transfer Settings
Select [OK].
1. Use the
or
button to select
[OK].
2. Press the
button.
z The output of some printers or photo developing services
may not reflect the specified print settings.
z Print settings cannot be set for movies.
z Images are printed in order according to the file number.
z A maximum of 998 images can be selected.
z When [Print Type] is set to [Both], the number of copies can
be set. When it is set to [Index], the number of copies cannot
be set (only one copy will be printed).
Print Settings/Transfer Settings
159
Setting the DPOF Transfer Settings
You can use the camera to specify settings for images before
downloading to a computer. Refer to the Software Starter Guide for
instructions on how to transfer images to your computer.
The settings used on the camera comply with the DPOF standards.
The
icon may display for a memory card with transfer
settings set by a different DPOF-compliant camera. These
settings will be overwritten by those set by your camera.
Single Images
1
Select [Transfer Order].
1. Press the
button.
2. Press the
button.
3. In the
menu, use the
or
button to select [
Transfer Order].
4. Press the
button.
2
Select [Order].
1. Use the
or
button to select
[Order].
2. Press the
button.
• Selecting [Reset] cancels all transfer
order settings.
3
Select the images.
1. Use the
or
button to select
images to transfer.
2. Press the
button.
• Pressing the FUNC./SET button
again deselects the setting.
• You can also select images in the
index playback mode.
3. Press the
button several times.
Transfer Selection
160
Print Settings/Transfer Settings
All the Images on a Memory Card
1
Select [Transfer Order].
1. Press the
button.
2. In the
menu, use the
or
button to select [
Transfer Order].
3. Press the
button.
2
Select [Mark all].
1. Use the
or
button to select
[Mark all].
2. Press the
button.
• Selecting [Reset] cancels all transfer
order settings.
3
Select [OK].
1. Use the
or
button to select
[OK].
2. Press the
button.
3. Press the
button several times.
z Images are transferred in order according to the file number.
z A maximum of 998 images can be selected.
Connecting to a TV
161
Connecting to a TV
Shooting/Playback Using a TV
You can use the supplied AV cable to shoot or playback images using a TV.
1
2
Turn off the camera and the TV.
Connect the AV cable to
the camera’s A/V OUT
terminal.
• Open the terminal cover by
sliding to the left and plug the AV
cable in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
Yellow
VIDEO
AUDIO
Black
4
5
Turn on the TV and switch it to video mode.
Turn on the camera.
z The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 50). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
z If the video system is set incorrectly, the camera output may
not display properly.
162
Troubleshooting
Troubleshooting
•
•
•
•
•
•
•
•
•
Camera (p. 162).
When the power is turned on (p. 163).
LCD monitor (p. 163).
Shooting (p. 165).
Shooting movies (p. 168).
Playback (p. 169).
Battery (p. 170).
TV monitor output (p. 171).
Printing with a direct print compatible printer (p. 171).
Camera
Camera will not operate.
Power is not turned on.
z Press the ON/OFF button (p. 12).
Memory card slot/battery
cover is open.
z Confirm that the Memory card slot /
battery cover is securely closed (p. 9).
Batteries are loaded in the
wrong direction.
z Reload the batteries in the correct
direction (p. 8).
Batteries are not the right
type.
z Use only unused AA-size alkaline
batteries or Canon AA-size NiMH
batteries (p. 182).
Battery charge is low and
z Replace the camera batteries with
the camera will not operate. two unused or fully charged batteries
(“Change the batteries”
(p. 8).
message displays).
z Use the AC Adapter Kit ACK800 (sold
separately) (pp. 34, 186).
Poor contact between
camera and battery
terminals.
z Wipe the battery terminals with a
clean dry cloth.
z Reload the batteries several times.
Troubleshooting
163
Sounds come from the camera interior.
The camera’s horizontal/
vertical orientation was
changed.
z The camera’s orientation mechanism
is operating. There is no malfunction.
When the power is turned on
“Card locked!” message appears.
The SD memory card’s or z When recording to, erasing from or
SDHC memory card’s write
formatting the memory card, slide the
protect tab is set to “Write
write protect tab upward (p. 184).
protect”.
The Date/Time menu appears.
The lithium date battery
charge is depleted.
z Replace the lithium date battery
(p. 191).
The battery holder was
removed.
z The date and time settings need to be
reset since they were lost (p. 12).
LCD monitor
The display darkens.
The image in the LCD
z This is a normal occurrence in
monitor will darken in strong devices containing CCDs and does
sunlight or bright light.
not constitute a malfunction. This
image will not be recorded when
shooting still photos, but it will be
recorded when shooting movies.
Display flickers.
Display flickers when shot
under fluorescent lighting.
z This is not a camera malfunction
(flickering recorded in movies, but not
in still images).
164
Troubleshooting
A bar of light (purplish red) appears on the LCD
monitor.
Sometimes appears when
shooting a bright subject,
such as the sun or other
light source.
z This is a normal occurrence in
devices containing CCDs and does
not constitute a malfunction. This bar
of light will not be recorded when
shooting still photos, but it will be
recorded when shooting movies.
appears.
A slow shutter speed has
likely been selected
because of insufficient
lighting.
z Set the IS Mode to any setting other
than [Off] (p. 73).
z Raise the ISO speed (p. 110).
z Set the Auto ISO Shift to any setting
other than [Off] (p. 111).
z Select a setting other than
(flash
off) (p. 111).
z Set the self-timer and attach the
camera to a tripod or other device
(p. 65).
appears.
This displays when using a z These settings will be overwritten by
memory card that has print
those set by your camera (pp. 154,
settings or transfer settings
159).
set by other DPOFcompliant cameras.
Noise displays./Subject’s movements are irregular.
Camera automatically
z There is no effect on the recorded
lightened the image
image.
displayed on the LCD
monitor to make it easier to
see when shooting in a dark
area (p. 51).
Troubleshooting
165
Shooting
Camera will not record.
Camera is in playback mode z Switch to Shooting mode (p. 14).
or connecting to a computer/ z Switch to the shooting mode after
printer mode.
disconnecting the interface cable in
connecting to a computer/printer
mode.
Flash is charging.
z When the flash is charged, the
indicator will light orange. Shooting is
now possible (p. 43).
Memory card is full.
z Insert a new memory card (p. 10).
z If required, download the images to a
computer and erase them from the
memory card to make space.
Memory card is not
formatted correctly.
z Format the memory card (p. 59).
z If reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest Canon
Customer Support Help Desk.
SD memory card or SDHC z Slide the write protect tab upward
memory card is write
(p. 184).
protected.
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
z Confirm the procedures in
“
appears” (p. 164).
AF-assist Beam is set to
[Off].
z In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 47). Take care not to obstruct
the AF-assist Beam with your hand
when used.
166
Troubleshooting
Subject is out of focal range. z Shoot with the subject at the correct
focusing distance (p. 194).
z The camera may be set to an
unintended function (such as
(Macro) or
(Manual Focus)).
Cancel the setting.
The subject is hard to focus z Use the focus lock, AF lock or manual
on.
focus to shoot (p. 103).
Subject in recorded image is too dark.
Insufficient light for shooting. z Raise the built-in flash to
on) (p. 65).
(Flash
The subject is
z Set the exposure compensation to a
underexposed because the
positive (+) setting (p. 114).
surroundings are too bright. z Use the AE Lock or spot metering
functions (pp. 107, 115).
Subject is too far away for
flash to reach.
z Shoot within correct flash range of the
subject when using the built-in flash
(p. 195).
z Raise the ISO speed and then shoot
(p. 110).
Subject in recorded image is too bright, or image
flashes white.
Subject is too close, making z Shoot within correct flash range of the
the flash too strong.
subject when using the built-in flash
(p. 195).
z Adjust the flash output with the flash
exposure compensation function
(p. 121).
z Turn [On] the Safety FE (p. 124).
The subject is overexposed z Set the exposure compensation to a
because the surroundings
negative (–) setting (p. 114).
are too dark.
z Use the AE Lock or spot metering
functions (pp. 107, 115).
Too much light is shining
z Change the shooting angle.
directly into the camera, or
is being reflected off the
subject.
Troubleshooting
Flash is set to
on).
(Flash
z Push down the flash to
(p. 65).
167
(Flash off)
Image contains noise.
ISO speed is too high.
z Higher ISO speeds and
(High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 110).
z In
,
and
,
, modes in the
mode or when using the Auto
ISO Shift, the ISO speed increases
and noise can appear.
White dots appear on the image.
Light from the flash has
z This is a phenomenon that occurs
reflected off dust particles or with digital cameras and does not
insects in the air. This is
constitute a malfunction.
particularly noticeable when
shooting using the wide
angle or when you increase
the aperture value in the
aperture-priority
mode.
Eyes appear red.
Light is reflected back from z Turn [On] the Red-Eye setting in the
the eyes when the flash is
Rec. menu (p. 93). For this mode to
used in dark areas.
be effective, the subject must be
looking right at the red-eye reduction
lamp. Try asking them to look directly
at the lamp.
Even better results can be obtained
by increasing the lighting in indoor
settings or approaching closer to the
subject.
z You can correct red eyes in images
using the Red-Eye Correction
function (p. 144).
168
Troubleshooting
Continuous shooting slows down.
The memory card’s
performance has dropped.
z To enhance the continuous shooting
performance, you are recommended
to format the memory card in the
camera after you save all its images
to your computer (p. 59).
Recording images to memory card takes a long
time.
Memory card was formatted z Use a memory card formatted in your
in another device.
camera (p. 59).
Lens will not retract.
Memory card slot/battery
cover was opened with
power on.
z After closing the memory card slot/
battery cover, turn the power on then
back off (p. 9).
Shooting movies
The recording time may not display properly or
shooting may stop unexpectedly.
The following types of
z Although the recording time may not
memory cards are used.
display properly during shooting, the
movie will be recorded correctly on
- Slow recording memory
the memory card. Recording time will
cards.
display properly if you format the
- Memory cards formatted
on a different camera or a memory card in this camera
(excluding slow recording memory
computer.
- Memory cards which have cards) (p. 59).
had images recorded and
erased repeatedly.
Troubleshooting
169
“!” displayed on the LCD monitor in red and
shooting automatically stopped.
There is insufficient free
z Try the following procedures.
space in the camera’s built- - Format the memory card with a low
in memory.
level format before shooting (p. 59)
- Lower the recording pixels (p. 82)
- Use a high-speed memory card
(SDC-512MSH, etc.)
Zoom does not operate.
Zoom lever was pressed
while shooting in movie
mode.
z Operate the zoom before shooting in
movie mode (p. 60). Note the digital
zoom is available while shooting, but
only in Standard movie mode.
Playback
Cannot play back.
You attempted to play back z Computer images that cannot be
images shot with another
played back may play back if they are
camera or images edited
added to the camera using the
with a computer.
supplied software program.
File name was changed with z Set the file name or location on the
a computer or file location
file format/structure of the camera.
was changed.
Refer to the Software Starter Guide
for details.
Images cannot be edited.
Some images shot with another camera cannot be edited.
Movies do not play back correctly.
Movies recorded with high recording pixels may momentarily stop
playing if played on slow reading memory cards.
You may experience frame dropping and audio breakup when
playing back a movie on a computer with insufficient system
resources.
170
Troubleshooting
Images shot with this camera may not play back properly on other
cameras.
Reading images from memory card is slow.
Memory card was formatted z Use a memory card formatted in your
in another device.
camera (p. 59).
Battery
Batteries consumed quickly.
Battery is not being used to z See Battery Handling Precautions
its full capacity.
(p. 182).
Batteries are not the right
type.
z Use only unused AA-size alkaline
batteries or Canon AA-size NiMH
batteries (p. 182).
Battery capacity drops due z If shooting in a cold location, warm
to low ambient
the batteries such as by placing them
temperatures.
in your pocket before using them.
Battery terminals are dirty.
z Wipe the terminals well with a dry
cloth before use.
z Reload the batteries several times.
If using Canon AA-size NiMH batteries
As the batteries have not
been used for over a year,
their recharging capacity
has decreased.
z Their charging performance should
return to normal after fully recharging
and fully depleting them over several
times.
Battery life has been
exceeded.
z Replace both batteries with new
ones.
Troubleshooting
171
TV monitor output
Image is distorted or not showing on TV monitor.
Incorrect video system
setting.
z Set the video system to the
appropriate setting, NTSC or PAL, for
your TV (p. 161).
Shooting in Stitch Assist
mode.
z The output will not appear on a TV in
Stitch Assist mode. Shoot in a
different shooting mode (p. 84).
Printing with a direct print compatible
printer
Cannot print
The camera and printer are z Securely connect the camera and
not properly connected.
printer with the specified cable.
The printer power is not
turned on.
z Turn on the printer power.
The print connection method z In the
menu, select [Print Method]
is not correct.
and select [Auto] (p. 50).
172
List of Messages
List of Messages
The following messages may appear on the LCD monitor during
shooting or playback. Please refer to the Direct Print User Guide for the
messages that display during a printer connection.
Busy...
Image is being recorded to the memory card, or the playback mode
is starting up.
Resetting all the camera and menu settings to default.
No memory card
You turned on the camera without a memory card installed, or with a
memory card installed in the wrong orientation (p. 10).
Card locked!
The SD memory card or SDHC memory card is write-protected
(p. 10).
Cannot record!
You attempted to shoot an image without a memory card installed,
with a memory card installed in the wrong orientation, or attempted
to attach a sound memo to a movie.
Memory card error
There may be something wrong with the memory card. By
formatting the malfunctioning memory card with the camera, you
may be able to continue using it. However, if this error message
appears even when using the supplied memory card, contact your
Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
Memory card is full of images and no more can be recorded or
saved, or no more image settings, sound recorder files or sound
memos can be recorded.
List of Messages
173
Naming error!
The file name could not be created because there is an image with
the same name as the folder that the camera is attempting to create,
or the highest possible file number has already been reached. In the
Set up menu, set [File Numbering] to [Auto Reset]; alternatively,
save all the images you wish to retain onto a computer, then
reformat the memory card. Please note that formatting will erase all
the existing images and other data.
Change the batteries
Battery charge is insufficient to operate the camera. Replace both
batteries immediately with unused AA-size alkaline batteries or fully
charged Canon AA-size NiMH batteries.
Also refer to Battery Handling Precautions (p. 182).
No image.
No images recorded on memory card.
Image too large.
You attempted to play back an image larger than 5616 × 3744 pixels
or with a large data size.
Incompatible JPEG
You attempted to play back an incompatible JPEG image (edited
with a computer, etc.).
RAW
You attempted to play back a RAW image.
Unidentified Image
You attempted to play back an image with corrupted data, an image
with a recording type specific to another manufacturer’s camera, or
an image that has been downloaded to a computer and altered.
Cannot magnify!
You attempted to magnify an image recorded in a different camera
or data type, an image edited with a computer, or a movie.
Cannot rotate
You attempted to rotate the image shot with a different camera or
data type, or an image edited with a computer.
174
List of Messages
Incompatible WAVE
A sound memo cannot be added to this image since the data type of
the existing sound memo is incorrect. In addition, sound cannot be
played back.
Cannot modify image
You attempted to resize or perform red eye correction on a movie or
an image recorded with another camera.
Or you attempted to resize an image already resized to
or an
image shot in
.
Cannot modify
Cannot apply red-eye correction as no red-eye is detected.
Cannot transfer!
When transferring images to your computer using the Direct
Transfer menu, you attempted to select an image with corrupted
data or an image taken with another camera. You may have also
attempted to select a movie when [Wallpaper] was selected in the
Direct Transfer menu.
Protected!
You attempted to erase a protected image, movie or sound memo.
Too many marks.
Too many images have been marked with print settings or transfer
settings. Cannot process any more.
Cannot complete!
Could not save a part of the print or transfer settings.
Unselectable image.
You attempted to set the print settings for a non-JPEG image.
Communication error
The computer was unable to download the image due to the large
amount of images (approx. 1000) stored on the memory card. Use a
USB card reader or PC card adapter to download the images.
List of Messages
175
Lens error, restart camera
An error was detected while the lens was in motion, and the power
has been automatically turned off. This error can occur if you hold
the lens while it is in motion or you operate it in a location with
excessive dust or sand in the air. Try turning the power back on, and
resume shooting or playback. If this message continues to display,
contact your Canon Customer Support Help Desk as there may be a
problem with the lens.
Exx
(xx: number) Camera detected error. Turn the power off and then
back on, then shoot or play back. A problem exists if the error code
reappears. Note the number and contact your Canon Customer
Support Help Desk. If an error code displays directly after taking a
picture, the shot may not have been recorded. Check image in
playback mode.
176
Appendix
Appendix
Safety Precautions
z Before using the camera, please ensure that you read the safety
precautions described below and in the “Safety Precautions” section.
Always ensure that the camera is operated correctly.
z The safety precautions noted on the following pages are intended to
instruct you in the safe and correct operation of the camera and its
accessories to prevent injuries or damage to yourself, other persons
and equipment.
z Equipment refers to the camera, battery, battery charger (sold
separately) and compact power adapter (sold separately).
Appendix
177
Warnings
Equipment
z Do not point the camera directly at the sun or bright light
sources.
• Doing so could damage the cameras CCD.
z Store this equipment out of the reach of children and infants.
Accidental damage by a child could result in serious injury.
• Wrist strap: Placement of the strap around the child’s neck could
result in asphyxiation.
• Memory card: It may be swallowed accidentally. If this occurs,
contact a doctor immediately.
z Do not attempt to disassemble or alter any part of the
equipment that is not expressly described in this guide.
z To avoid the risk of high-voltage electrical shock, do not touch
the flash portion of the camera if it has been damaged.
z Stop operating the equipment immediately if it emits smoke or
noxious fumes.
z Do not allow the equipment to come into contact with, or
become immersed in, water or other liquids. If the exterior
comes into contact with liquids or salt air, wipe it dry with a
soft, absorbent cloth.
Continued use of the equipment may result in fire or electrical shock.
Immediately turn the camera power off and remove the camera
batteries or unplug the battery charger or compact power adapter from
the power outlet. Please consult your camera distributor or the closest
Canon Customer Support Help Desk.
178
Appendix
Equipment
z Do not use substances containing alcohol, benzine, thinners
or other flammable substances to clean or maintain the
equipment.
z Do not cut, damage, alter or place heavy items on the power
cord.
z Use only recommended power accessories.
z Remove the power cord on a regular periodic basis and wipe
away the dust and dirt that collects on the plug, the exterior of
the power outlet and the surrounding area.
z Do not handle the power cord if your hands are wet.
Continued use of the equipment may result in fire or electrical shock.
Battery
z Do not place the batteries near a heat source or expose it to
direct flame or heat.
z The batteries should not be immersed in water or sea water.
z Do not attempt to disassemble, alter or apply heat to the
batteries.
z Avoid dropping or subjecting the batteries to severe impacts
that could damage the casing.
z Use only recommended batteries and accessories.
Failure to follow these precautions may cause explosions or leaks,
resulting in fire, injury and damage to the surroundings. In the event
that a battery leaks and the eyes, mouth, skin or clothing contact these
substances, immediately flush with water and seek medical
assistance.
z Disconnect the battery charger and compact power adapter
from both the camera and the power outlet after recharging or
when not in use to avoid fire and other hazards.
z Do not place anything, such as tablecloths, carpets, bedding or
cushions, on top of the battery charger while it is charging.
Leaving the units plugged in for a long period of time may cause them
to overheat and distort, resulting in fire.
Appendix
179
Battery
z When recharging the Canon AA-size NiMH batteries, use only a
specified battery charger.
z The compact power adapter is designed for exclusive use with
this equipment. Do not use it with other products.
There is a risk of overheating and distortion which could result in fire or
electrical shock.
z Before you discard a battery, cover the terminals with tape or
other insulators to prevent direct contact with other objects.
Contact with the metallic components of other materials in waste
containers may lead to fire or explosions.
Others
z Do not trigger the flash in close proximity to human or animal
eyes. Exposure to the intense light produced by the flash may
damage eyesight.
In particular, remain at least one meter (39 inches) away from infants
when using the flash.
z Keep objects that are sensitive to magnetic fields (such as
credit cards) away from the speaker of the camera.
Such items may lose data or stop working.
180
Appendix
Cautions
Equipment
z Be careful not to bang the camera or subject it to strong
impacts or shocks that could lead to injury or damage the
equipment when wearing or holding it by the strap.
z Be careful not to bump or strongly push the end of the lens.
The above-mentioned could lead to injury or damage the equipment.
z Do not store the equipment in humid or dusty areas.
z During shooting, do not allow metal objects (such as pins or
keys) or dirt to contact the charger terminals or plug.
Such conditions could lead to fire, electrical shock or other damage.
z Avoid using, placing or storing the equipment in places
subject to strong sunlight or high temperatures, such as the
dashboard or trunk (boot) of a car.
z Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Or, do
not use the equipment if the cable or plug is damaged, or if the
plug is not fully inserted into the power outlet.
z Do not use in locations with poor ventilation.
The above-mentioned can cause leakage, overheating or explosion,
resulting in fire, burns or other injuries. High temperatures may also
cause deformation of the casing.
z When not using the camera for extended periods of time,
remove the batteries from the camera or battery charger and
store the equipment in a safe place.
If the batteries are left inside the camera, damage caused by leakage
may occur.
z Do not connect compact power adapters or battery chargers to
devices such as electrical transformers for foreign travel
because it may lead to malfunctions, excessive heat
generation, fire, electric shock or injury.
Appendix
181
Flash
z Do not operate the flash with dirt, dust or other items stuck to
the surface of the flash.
z Be careful not to cover the flash with your fingers or clothing
when shooting.
The flash may be damaged and emit smoke or noise. The resulting
heat build-up could damage the flash.
z Do not touch the surface of the flash after taking several
pictures in rapid succession.
Doing so could result in burns.
Preventing Malfunctions
Avoid Strong Magnetic Fields
z Never place the camera in close proximity to electric motors or
other equipment generating strong electromagnetic fields.
Exposure to strong magnetic fields may cause malfunctions or corrupt
image data.
Avoid Condensation Related Problems
z When moving the equipment rapidly from cold to hot
temperatures, you can avoid condensation by placing the
equipment in an airtight, resealable plastic bag and letting it
adjust to temperature changes slowly before removing it from
the bag.
Moving the equipment rapidly from cold to hot temperatures may
cause condensation (water droplets) to form on its external and
internal surfaces.
If Condensation Forms Inside the Camera
z Stop using the camera immediately.
Continued use may damage the equipment. Remove the memory card
and batteries or compact power adapter from the camera and wait
until the moisture evaporates completely before resuming use.
182
Appendix
Battery Handling
Battery Charge
The following icon and message will display.
Battery charge is low. If
using the camera for an
extended period, replace the
batteries as soon as possible.
Change the batteries
Batteries are fully depleted and
the camera can no longer
operate. Replace the batteries
immediately.
Battery Handling Precautions
z This camera uses AA-size alkaline batteries or Canon AA-size
NiMH batteries (sold separately).
While it is possible to use AA-size nickel-cadmium batteries,
performance is unreliable and their use is not recommended.
z Since the performance of alkaline batteries may differ
according to brand, the operating time of the batteries you
purchase may not be as long as the batteries that came with
the camera.
z When using the camera under low temperature conditions or
over long periods, you are recommend to use of Canon AAsize NiMH batteries (sold separately).
Camera operating time may shorten at low temperatures when
alkaline batteries are used. Also due to their specifications, alkaline
batteries may expire faster than NiMH batteries.
z Never mix unused and partially used batteries.
The partially used batteries may leak.
z Do not install the batteries with their terminals (
and
)
reversed.
z Do not mix batteries of different types or from different
manufacturers.
Appendix
183
z Before installing the batteries, wipe the battery terminals well
with a dry cloth.
If the battery terminals are soiled with oil from one’s skin or other dirt,
the number of recordable images may be considerably diminished, or
the amount of time the camera can be used may be reduced.
z At low temperatures, battery performance may be reduced and
the low battery icon ( ) may appear earlier than usual.
Under these conditions, restore the battery performance by warming it
in a pocket immediately before use.
z Do not put the batteries into a pocket together with metallic
items such as a key ring.
The batteries may be short circuited.
z When not using the camera for long periods, remove the
batteries from the camera and store them separately.
If the batteries are left inside the camera, the camera may become
damaged from battery leakage.
WARNING
Never use damaged batteries or batteries whose outer seal is
completely or partially missing or peeled off, as there is risk that such
batteries may leak, overheat, or burst. Always check the seals on
store-bought batteries before loading them, as some batteries may
come with defective seals. Do not use batteries with defective seals.
Never use batteries that look like this.
Batteries with all or part of the seal (electrical insulation
sheath) peeled off.
The positive electrode (plus terminal) is flat.
The negative terminal is correctly formed (protruding from
the metal base), but the seal does not extend up over the
edge of the metal base.
184
Appendix
Handling the Memory Card
SD Memory Card or SDHC Memory Card
Write Protect Tab
Write Protect Tab
Slide the switch up.
Writing/Erasing Possible
Slide the switch down
(you can protect the
images and other
data on the memory
card).
Writing/Erasing Impossible
Cautions When Handling
z Memory cards are high-precision electronic devices. Do not
bend them, apply force to them, or subject them to shocks or
vibration.
z Do not attempt to disassemble or alter the memory card.
z Do not allow dirt, water or foreign objects to contact the
terminals on the back of the memory card. Do not touch the
terminals with your hands or metal objects.
z Do not peel away the original label on the memory card or
cover it with another label or sticker.
z When writing on the memory card, do not use a pencil or ballpoint pen. Only use a soft point pen (e.g. felt-tip pen).
z Do not use or store memory cards in the following locations.
• Locations subject to dust or sand
• Locations subject to high humidity and high temperatures
z Since some or all of the data recorded on the memory card
may be corrupted or erased by electrical noise, static
electricity, camera or memory card malfunction, making a
backup copy of important data is recommended.
Appendix
185
Formatting
z Please note that formatting (initializing) an memory card
erases all data, including protected images.
z You are recommended to use memory cards that have been
formatted in your camera.
• The memory card supplied with the camera may be used without
further formatting.
• When the camera is malfunctioning, a corrupted memory card might
be the cause. Reformatting the memory card may solve the problem.
• When a non-Canon brand memory card is malfunctioning,
reformatting it may solve the problem.
• Memory cards formatted in other cameras, computers, or peripheral
devices may not operate correctly in this camera. When that
happens, reformat the memory card with this camera.
z If formatting in the camera does not work properly, turn the
camera off and re-insert the memory card. Then turn the
camera back on and format again.
z Be careful when transferring or disposing of a memory card.
Formatting or erasing the data on a memory card merely
changes the file management information on the memory card
and does not ensure that its contents are completely deleted.
When disposing of a memory card, take precautions, such as
physically destroying the memory card, to prevent personal
information leaks.
186
Appendix
Using the Power Kits (Sold Separately)
Using Rechargeable Batteries
(Battery and Charger Kit CBK4-300)
This kit includes a battery charger and four rechargeable AA-size
NiMH (nickel metal hydride) batteries. Charge batteries as shown
below.
To a power outlet
To a power outlet
Charge Indicator
4batteries
2batteries
• After inserting the batteries, plug the charger (CB-5AH) into an outlet,
or attach the power cord to the charger (CB-5AHE, not shown) and
plug the other end into an outlet.
• Do not insert and charge additional batteries once charging has
begun.
• The charge indicator blinks while charging, then remains lit when
charging is finished.
z The CB-5AH/CB-5AHE battery charger can only be used to
charge Canon AA-size NiMH batteries NB-3AH and NB2AH. Please do not attempt to charge other type of battery.
z Do not mix batteries with different purchase dates or
different charge states. When recharging batteries, always
recharge both of them at the same time.
z Do not attempt to recharge fully charged batteries, as doing
so may reduce or impair battery performance. Also, do not
charge batteries for more than 24 consecutive hours.
z Do not recharge batteries in enclosed areas that tend to
retain heat.
z Do not recharge the batteries until the LCD monitor displays
the “Change the batteries” message. Repeatedly recharging
batteries before they become fully depleted may cause
batteries to lose capacity.
Appendix
187
z Wipe the battery terminals well with a dry cloth in the
following situations, as the terminals may be soiled with oil
from one’s skin or other dirt:
- If the battery usage time has considerably diminished
- If the number of recordable images has considerably
diminished
- When charging the batteries (insert and remove the
batteries two or three times before charging)
- When charging completes in a space of a few minutes
(the battery charger indicator remains lit)
z You may not be able to fully charge the batteries due to their
specifications right after purchase or after long periods of
nonuse. If this happens, after fully charging them, use the
batteries until their charge is depleted. After doing this
several times, battery performance will be restored.
z If you store batteries for a long period of time (about 1 year),
it is recommended that you fully deplete the batteries in the
camera and to then store them at room temperature (0 to
30°C/32 to 90°F) in low humidity. Storing them in a fully
charged condition can shorten their lifespan or degrade their
performance.
Again, if you do not use batteries for more than 1 year, fully
charge them once a year and deplete them in the camera
before storing them.
z If the battery usage time has become considerably low
despite wiping the terminals and charging them until the
battery charger indicator remains lit, this may indicate that
the batteries have reached the end of their lifespan. Replace
them with new batteries. If you are purchasing new batteries,
look for Canon AA-size NiMH batteries.
z Leaving batteries in the camera or charger may result in
damage from battery leakage. When not in use, remove the
batteries from the camera or charger and store them in a
cool, dry location.
188
Appendix
z It takes approximately 4 hours 40 minutes for the charger to
fully recharge the batteries after they have been depleted.
When two batteries are placed on each side of the charger,
recharging will take approximately two hours (as determined
by testing at Canon facilities).
Charge batteries in an environment where the temperature is
in the range of 0 to 35°C (32 to 95°F).
z The charging time varies according to the ambient
temperature and to the battery charge state.
z The battery charger may emit noise while charging. This is
not a malfunction.
z Battery/Charger Kit CBK4-200 can also be used.
Using the AC Adapter Kit ACK800
It is best to power the camera with AC Adapter Kit ACK800 (sold
separately) when you are using it for long periods of time or connecting
it to a computer.
Turn the camera power off before connecting or disconnecting
the AC adapter.
1
2
Connect the power cord to
the compact power
adapter first and then plug
the other end into the
power outlet.
Compact Power Adapter
CA-PS800
Open the terminal cover
by sliding to the left and
attach the cord to the DC
IN terminal.
DC IN terminal
Appendix
189
Using an Externally Mounted Flash
(Sold Separately)
High-Power Flash HF-DC1
This flash is used to supplement the camera’s built-in flash when the
subject is too far away for proper illumination. Use the following
procedures to affix the camera and High-Power Flash to the supporting
bracket.
Please read the instructions accompanying the flash along with this
explanation.
Tripod
Sockets
Bracket
(Comes with the flash)
z The High-Power Flash will not fire in the following situations:
- When shooting in
mode
- When Flash Adjust is set to [Manual]
z The flash charge time will lengthen as the battery charge
gets weaker. Always set the power/mode switch to [OFF]
when you finish using the flash.
z Be careful not to touch the flash window or sensor windows
with your fingers while the flash is in use.
z The flash may fire if another flash is being used in close
proximity.
z The High-Power Flash may not fire outdoors in daylight or
when there are no reflective items.
190
Appendix
z For continuous shooting, although the flash fires for the first
shot, it does not fire for subsequent shots.
z Fasten the attachment screws securely so that they do not
loosen. Failure to do so may lead to the dropping of the
camera and flash resulting in damage to both.
z Before attaching the bracket to the flash, check that the
lithium battery (CR123A or DL123) is installed.
z To illuminate the subjects properly, install the flash so that it is
up against the side of the camera and parallel with the
camera’s front panel.
z A tripod can be used even when the flash is attached.
„ Batteries
z Charge becomes Severely Limited
If the battery usage time has considerably diminished, wipe the battery
terminals well with a dry cloth. The terminals may be dirty from
fingerprints.
z Usage in Cold Temperatures
Get a spare generic lithium battery (CR123A or DL123). You are
recommended to place the spare battery in your pocket to warm it up
before switching it for the battery in the flash.
z Non-Use over Extended Periods
Leaving batteries in the High-Power Flash could allow the battery fluid
to leak, damaging the product. Remove the batteries from the HighPower Flash and store them in a cool, dry place.
Appendix
191
Replacing the Date Battery
If the Date/Time in the Set up menu appears when the camera power
is turned on, the date battery charge is low and the date and time
settings have been lost. Please purchase a lithium coin battery
(CR1220) and replace it as follows.
The date battery is preinstalled at the factory and may therefore
expire earlier than its rated lifespan after the camera has been
purchased.
Be particularly careful to keep the date batteries out of the
reach of children. Seek medical assistance immediately if a
child swallows a battery since corrosive battery fluids could
damage the stomach or intestinal wall.
1
2
Confirm that the camera is turned off.
3
Pull out the battery holder in
the direction indicated by
the arrow.
4
Remove the battery by pulling it
up in the direction indicated by
the arrow.
Hook your nail onto the date
battery holder and lightly
pull it up.
192
5
6
7
Appendix
Insert a new battery with
the (–) side facing up.
(–) side
Replace the battery holder.
When the Date/Time menu appears, set the
date and time (p. 12).
After purchasing the camera and turning on the power for the
first time, although the Date/Time menu will appear, you do not
need to replace the date battery.
If you ever dispose of your camera, first remove the date battery
for recycling according to the recycling system of your country.
Appendix
193
Camera Care and Maintenance
Never use thinners, benzine, detergents or water to clean the
camera. These substances may distort or damage the
equipment.
Camera Body
Gently wipe dirt off the camera body with a soft cloth or eyeglass lens
wiper.
Lens
First use a lens blower brush to remove dust and dirt, then remove any
remaining dirt by wiping the lens lightly with a soft cloth.
Never use organic solvents on the camera body or lens. If dirt
remains, contact the closest Canon Customer Support Help
Desk as listed on the rear of the European Warranty System
(EWS) Booklet.
LCD Monitor
Use a lens blower brush to remove dust and dirt. If necessary, gently
wipe with a soft cloth or an eyeglass lens wiper to remove stubborn
dirt.
Never rub or press strongly on the LCD monitor. These actions
may damage it or lead to other problems.
194
Appendix
Specifications
All data is based on Canon’s standard testing methods. Subject to
change without notice.
PowerShot SX100 IS
(W): Max. wide angle (T): Max. telephoto
Camera Effective Pixels : Approx. 8.0 million
Image Sensor
: 1/2.5-inch type CCD (Total number of pixels:
Approx. 8.3 million)
Lens
: 6.0 (W) – 60 (T) mm
(35mm film equivalent: 36 (W) – 360 (T) mm)
f/2.8 (W) – f/4.3 (T)
Digital Zoom
: Approx. 4.0x (Up to approx. 40x in combination
with the optical zoom)
LCD Monitor
: 2.5-inch type, low-temperature polycrystalline
silicon TFT color LCD, approx. 172 000 pixels
(Picture coverage 100%) with wide viewing
angle
AF System
: TTL autofocus
AF lock and Manual focus are available
AF Frame: Face Detect*/Center**
* If no face is detected, center 1-point is used.
AF frame can be moved and fixed to specified face.
** Size of AF frame can be selected
Focusing Range
(From end of lens)
: Normal: 50 cm (1.6 ft.) – infinity (W),
1 m (3.3 ft.) – infinity (T)
Macro: 1 – 50 cm (W) (0.39 in. – 1.6 ft. (W))
Manual focus: 1 cm (0.39 in.) – infinity (W),
1 m (3.3 ft.) – infinity (T)
Kids&Pets: 1 m – infinity (W/T)
Shutter
: Mechanical shutter + electronic shutter
Shutter Speeds
: 15 – 1/2500 sec.
• The shutter speed varies depending on the
shooting mode.
• Slow shutter speeds of 1.3 sec. or slower
operate with noise reduction.
Appendix
195
Image Stabilization
: Lens shift type
Continuous/Shoot Only*/Panning*/Off
Metering System
: Evaluative*, Center-weighted average or Spot
* Still images only
* When [Face Detect] is selected, the brightness of
the face is also evaluated.
Exposure Compensation : ±2 stops in 1/3-stop increments
Safety Shift is available.
ISO speed
(Standard Output
Sensitivity,
Recommended
Exposure Index)
: Auto*, High ISO Auto*, ISO 80/100/200/400/
800/1600
White Balance
: Auto, Day Light, Cloudy, Tungsten,
Fluorescent, Fluorescent H or Custom
Built-in Flash
: Auto, on, off
Flash output compensation (±2.0 stops in 1/3stop increments), Red-Eye Reduction, flash
output settings (3 steps), FE Lock, Slow
Synchro and Safety FE are available.
* Camera automatically sets the optimal speed.
Compensation Range of : 50 cm – 3.0 m (1.6 – 9.8 ft.) (W),
50 cm – 2.0 m (1.6 – 6.6 ft.) (T)
Built-In Flash
(ISO speed: Auto)
Shooting Modes
: Auto
Creative zone:
Program,
Shutter-speed priority,
Aperture priority,
Manual
Image zone:
Portrait, Landscape, Night Snapshot,
Kids&Pets, Special Scene*1, Stitch Assist and
Movie*2
*1 Night Scene, Indoor, Foliage, Snow, Beach,
Fireworks and Aquarium.
*2 Standard and Compact.
Continuous Shooting
: Approx. 1.3 shots/sec. (In Large/Fine mode)
Approx. 0.8 shots/sec. (Continuous Shooting AF,
Large/Fine mode)
Approx. 0.8 shots/sec. (Continuous Shooting LV,
Large/Fine mode)
Self-timer
: Activates shutter after an approx. 10-sec./
approx. 2-sec. delay, Custom Timer
196
Appendix
Recording Media
: SD memory card/SDHC memory card/
MultiMediaCard/MMCplus card/HC MMCplus
card
File Format
: Design rule for camera file system and DPOF
compliant
Data Type
: Still images: Exif 2.2 (JPEG)*
: Movies: AVI (Image data: Motion JPEG; Audio
data: WAVE (monaural))
: Sound memos: WAVE (monaural)
* This digital camera supports Exif 2.2 (also called
“Exif Print”). Exif Print is a standard for enhancing
the communication between digital cameras and
printers. By connecting to an Exif Print-compliant
printer, the camera’s image data at the time of
shooting is used and optimized, yielding extremely
high quality prints.
Compression
: Superfine, Fine, Normal
Number of (Still images) : Large:
Recording
Medium 1:
Pixels
Medium 2:
Medium 3:
Small:
Postcard:
Widescreen:
(Movies)
3264 × 2448 pixels
2592 × 1944 pixels
2048 × 1536 pixels
1600 × 1200 pixels
640 × 480 pixels
1600 × 1200 pixels
3264 × 1832 pixels
: Standard:
640 × 480 pixels, 30 frames/sec.
640 × 480 pixels, 30 frames/sec., LP
320 × 240 pixels, 30 frames/sec.
Recording can continue until the memory card
is full*1 (can record up to a maximum of 4 GB
at one time)*2
Compact: (can record for 3 min.)
160 × 120 pixels, 15 frames/sec.
*1 Using super high-speed memory cards (SDC-512
MSH recommended).
*2 Even if the clip size has not reached 4 GB,
recording will stop at the moment the clip length
reaches 1 hour. Depending on the volume and data
writing speed of the memory card, recording may
stop before reaching 1 hour or before the recorded
data volume has reached 4 GB.
Appendix
197
Audio
: Quantization Bit Rate: 8 bit
Sampling Rate
Sound Memos and Movies: 11 kHz
Remote shooting
: Shooting possible when connected to a
computer using supplied software.
Playback Modes
: Single (histogram displayable), Index (9
thumbnail images), Magnified (approx. 10x
(max.) in LCD monitor, advance or reverse
through magnified images possible), Red-Eye
Correction, Jump (it is possible to jump to
every tenth or hundredth image, to the first
image of each shooting date, to movies or to
the first image in each folder. In index playback
mode, it displays 9 images at once.), Auto
Play, Sound memos (up to 1 min.), Movie (slow
motion play back possible) or Resize.
Direct Print
: PictBridge compliant, and Canon Direct Print
and Bubble Jet Direct compatible
Interface
: USB 2.0 Hi-Speed (mini-B) Audio/Video output
(NTSC or PAL selectable, monaural audio)
Communication Settings : MTP, PTP
Power Source
: 2 AA-size alkaline batteries
2 AA-size NiMH batteries NB4-300 (sold
separately)
AC Adapter Kit ACK800 (sold separately)
Operating Temperatures : 0 – 40 °C (32 – 104 °F)
(0 – 35 °C (32 – 95 °F) when NB-3AH is used.)
Operating Humidity
: 10 – 90%
Dimensions
(excluding protrusions)
: 108.7 × 71.4 × 46.7 mm
(4.28 × 2.81 × 1.84 in.)
Weight
(camera body only)
: Approx. 265 g (9.35 oz.)
198
Appendix
Battery Capacity
Number of Images Shot
LCD Monitor On
(Based on the CIPA standard)
Playback
Time
AA-size Alkaline
Batteries (included
with the camera)
Approx. 140 images
Approx.
7 hours
AA-size NiMH
Batteries (NB-3AH
(fully charged))
Approx. 400 images
Approx.
10 hours
z The actual figures will vary according to the shooting conditions and
settings.
z Movie data is excluded.
z At low temperatures, the battery performance may diminish and the
low battery icon may appear very rapidly. In these circumstances,
the performance can be improved by warming the battery in a pocket
before use.
Test Conditions
Shooting: Normal temperature (23°C ±2°C/73°F ±3.6°F), normal
relative humidity (50% ±20%), alternating wide angle end
and telephoto end shots at 30 second intervals with the flash
fired once every two shots and the camera power turned off
after every tenth shot. Power is left off for a sufficient amount
of time*, then the power is turned back on and the testing
procedure is repeated.
• A Canon-brand memory card is used.
* Until the battery returns to normal temperature
Playback: Normal temperature (23°C ±2°C/73°F ±3.6°F), normal
relative humidity (50% ±20%), continuous playback at 3
seconds per image.
See Battery Handling Precautions (p. 182).
Appendix
199
Memory Cards and Estimated Capacities
: Memory card included with the camera
Recording Pixels
(Large)
3264 × 2448 pixels
(Medium 1)
2592 × 1944 pixels
(Medium 2)
2048 × 1536 pixels
(Medium 3)
1600 × 1200 pixels
(Small)
640 × 480 pixels
(Postcard)
1600 × 1200 pixels
(Widescreen)
3264 × 1832 pixels
•
Compression
16 MB
SDC-128M
SDC512MSH
3
35
139
6
59
231
13
123
479
5
49
190
9
87
339
19
173
671
8
76
295
15
136
529
30
269
1041
13
121
471
24
217
839
47
411
1590
52
460
1777
81
711
2747
128
1118
4317
24
217
839
5
47
183
8
79
307
18
166
642
Capable of smooth continuous shooting (p. 91) when memory card has
been formatted with a low level format.
• This reflects standard shooting criteria established by Canon. Actual results
may vary according to the subject and shooting conditions.
200
Appendix
Movie
†:Memory card included with the camera
Recording Pixels
/Frame Rate
Standard
Compact
16 MB
SDC-128M
SDC-512MSH
640 × 480 pixels
30 frames/sec.
6 sec.
1 min. 4 sec.
4 min. 9 sec.
640 × 480 pixels
30 frames/sec., LP
14 sec.
2 min. 7 sec.
8 min. 14 sec.
320 × 240 pixels
30 frames/sec.
20 sec.
3 min. 1 sec.
11 min.
42 sec.
160 × 120 pixels
15 frames/sec.
1 min.
40 sec.
14 min.
29 sec.
55 min.
57 sec.
• Maximum movie clip length at
: 3 min. The figures indicate the
maximum continuous recording time.
Image Data Sizes (Estimated)
Compression
Recording Pixels
3264 × 2448 pixels
3436 KB
2060 KB
980 KB
2592 × 1944 pixels
2503 KB
1395 KB
695 KB
2048 × 1536 pixels
1602 KB
893 KB
445 KB
1600 × 1200 pixels
1002 KB
558 KB
278 KB
249 KB
150 KB
84 KB
640 × 480 pixels
1600 × 1200 pixels
—
3264 × 1832 pixels
2601 KB
Recording Pixels
Standard
Compact
640 × 480 pixels
558 KB
1540 KB
Frame Rate
—
736 KB
File size
30 frames/sec.
1920 KB/sec.
30 frames/sec., LP
960 KB/sec.
320 × 240 pixels
30 frames/sec.
660 KB/sec.
160 × 120 pixels
15 frames/sec.
120 KB/sec.
Appendix
201
MultiMediaCard
Interface
Compatible with MultiMediaCard standards
Dimensions
32.0 × 24.0 × 1.4 mm (1.3 × 0.9 × 0.06 in.)
Weight
Approx. 1.5 g (0.05 oz.)
SD Memory Card
Interface
Compatible with SD memory card standards
Dimensions
32.0 × 24.0 × 2.1 mm (1.3 × 0.9 × 0.1 in.)
Weight
Approx. 2 g (0.07 oz.)
NiMH Battery NB-3AH
(Supplied with the separately sold NiMH Battery NB4-300 set or the
Battery and Charger Kit CBK4-300)
Type
AA-size nickel metal hydride battery
Nominal Voltage
1.2 V DC
Typical Capacity
2500 mAh (min.: 2300 mAh)
Cycle Life
Approx. 300 times
Operating
Temperatures
0 – 35 °C (32 – 95 °F)
Diameter × Length
14.5 × 50.0 mm (0.57 × 1.97 in.)
Weight
Approx. 30 g (1.06 oz.)
202
Appendix
Battery Charger CB-5AH/CB-5AHE
(Supplied with the separately sold Battery and Charger Kit CBK4-300)
Rated Input
100 – 240 V AC (50/60 Hz)
Rated Output
565 mA*1, 1275 mA*2
Charging Time
Approx. 4 hours 40 min.*1, Approx. 2 hours*2
Operating
Temperatures
0 – 35 °C (32 – 95 °F)
Dimensions
65.0 × 105.0 × 27.5 mm (2.56 × 4.13 × 1.08 in.)
Weight (body only)
Approx. 95 g (3.35 oz.)
*1 When charging four NB-3AH batteries
*2 When charging two NB-3AH batteries loaded one on each side of the battery
charger
Compact Power Adapter CA-PS800
(Included with the separately sold AC Adapter Kit ACK800)
Rated Input
100 – 240 V AC (50/ 60 Hz)
Rated Output
3.15 V DC, 2.0 A
Operating
Temperatures
0 – 40 °C (32 – 104 °F)
Dimensions
42.6 × 104.0 × 31.4 mm (1.68 × 4.11 × 1.24 in.)
Weight
Approx. 180 g (6.35 oz.) (excluding power cord)
Index
203
Index
Numerics
3:2 Guide ....................47, 53, 127
A
AC Adapter Kit ACK800 ....34, 188
Accessory (Sold Separately) .....34
ACK800 .............................34, 188
AE Lock ...................................107
AF Frame ......................53, 97, 98
AF Lock ...........................103, 104
AF Mode ...................................97
AF-assist Beam .................47, 165
Aperture Value ........87, 88, 89, 90
Auto
Shooting ................................14
Auto ISO Shift .........................111
Auto Play .................................143
Auto Power Down .....................49
Auto Rotate Function ..............128
AV Cable .....................................1
B
Battery
Battery Capacity ..................198
Charging .............................182
Handling ..............................182
Installing ..................................8
Rechargeable Batteries ......186
Rechargeable Battery .........182
C
Camera Care and
Maintenance ...........................193
Compact Power Adapter .188, 202
Components Guide ...................38
Compression ............................. 70
Continuous Shooting ................ 91
Control Dial ............................... 41
Correct Frame ......................... 144
Correction Frames
Add ..................................... 147
Removing ........................... 148
Create Folder .......................... 129
Creating an Image
Destination .............................. 129
Creative Zone ........................... 75
Custom White Balance ........... 117
D
Date/Time ................................. 12
Date/Time Setting ..................... 12
Default Values .......................... 58
Detailed .................................... 55
Digital Tele-Converter ............... 61
DIGITAL Terminal ............... 22, 26
Digital Zoom .............................. 61
Digital Zoom/Digital
Tele-Converter .......................... 61
Direct Transfer .................... 29, 30
Disp. Overlay .................... 47, 127
Distance Units ........................... 49
Downloading Images
to a Computer ........................... 24
DPOF
Print Settings ........................ 48
Transfer Settings .......... 48, 159
DPOF Print Order
Print Style ........................... 154
Selecting Images ................ 154
DPOF Print Settings ............... 154
DPOF Transfer Order ............. 159
DPOF Transfer Settings ......... 159
204
Index
E
Embedding the Date ................. 72
Erasing .................................... 153
All Images ........................... 153
Single Images ....................... 21
Exposure ......................... 107, 114
Exposure Compensation ......... 114
F
Face Detect .............................. 98
Face Selection ........................ 101
Face Selector Button ................ 40
FE Lock ................................... 109
File Number ...................... 55, 131
Flash ......................................... 65
Flash Adjustment .................... 122
Flash Exposure
Compensation ......................... 122
Flash Output ...........................123
Focus ............................ 15, 95, 98
Focus Check ............................. 95
Focus Check Display .............. 135
Focus Lock ............................. 103
Format ...................................... 59
Formatting ........................... 58, 59
Frame Rate ............................... 82
FUNC. Menu ............................. 46
FUNC./SET ............................... 40
G
Grid Lines ................... 47, 53, 127
H
HF-DC1 ............................. 34, 189
High-Power Flash ...................189
Histogram .................................. 57
I
Image Data Sizes
(Estimated) ..............................200
Image Stabilizer Function ......... 73
Image Zone .............................. 75
Index Playback ....................... 134
Indicator .................................... 43
Information Displayed on
the LCD Monitor ................. 51, 53
Interface Cable ............... 1, 22, 26
IS Mode .................................... 73
ISO Speed ...................... 110, 111
J
Jump ....................................... 138
K
Kids&Pets ................................. 76
L
Landscape ................................ 76
Language ............................ 13, 50
LCD Brightness ........................ 52
LCD Monitor
Night Display ........................ 52
Playback Information ............ 55
Shooting Information ............ 53
Using the LCD Monitor ......... 51
LCD monitor
Night Display ........................ 52
List of Messages ..................... 172
M
Macro ........................................ 66
Magnifying Images ................. 133
Maintenance ........................... 193
Manual
Focus .................................. 103
Shooting Mode ..................... 90
White Balance .................... 116
Manual Focus ......................... 105
Memory Card .............................. 1
Estimated Capacities .......... 199
Index
Formatting .............................59
Handling ..............................184
Inserting ................................10
MENU .................................40, 45
Menu
FUNC. Menu ...................44, 46
MENU Button ........................45
Menus and Settings ..............44
Play Menu .......................45, 48
Print Menu ......................45, 48
Rec. Menu ......................45, 46
Set up Menu ...................45, 48
Menu List ..................................46
Messages ................................172
Metering Mode ........................115
MF-Point Zoom .................47, 105
Microphone ...............................38
Mode Dial ......................14, 40, 75
Mode Switch .............................40
Movie
Playback .......................20, 139
Recording .......................18, 79
Shooting ................................18
Viewing .................................20
Mute ..........................................48
My Colors ................................119
N
Night Display .............................52
Night Scene ..............................77
Night Snapshot .........................76
O
ON/OFF Button ...................14, 40
Operation Sound .......................48
Operation Vol. ...........................48
Optical Zoom .............................60
Overexposure Warning .............57
205
P
Package Contents ...................... 1
Panorama ................................. 83
Play Menu ................................. 48
Playback ............................. 17, 20
Using a TV .......................... 161
Playback Information ................ 55
Playback Mode ......................... 55
Playback Vol. ............................ 48
Portrait ...................................... 76
Postcard ................................... 71
Power
Compact Power Adapter
..................................... 188, 202
Rechargeable Batteries ...... 186
Power Saving Function ....... 43, 49
Print Menu ................................ 48
Print/Share .............................. 125
Print/Share Button 23, 30, 40, 125
Printing ............................. 22, 154
Program AE .............................. 85
Protecting ............................... 152
R
Rec. Menu ................................ 46
Rec. Review .............................. 16
Recording Pixels ........... 53, 69, 82
Red-Eye .............................. 46, 93
Red-Eye Correction .... 48, 93, 144
Reset All ................................... 58
Resize ..................................... 149
Resume Playback ..................... 17
Review ................................ 16, 47
Using a TV .......................... 161
Rotate ..................................... 141
S
Safety FE ................................ 124
Safety MF ............................... 106
206
Index
Safety Shift ......................... 47, 89
Safety Zoom ............................. 63
Self-Timer ................................. 67
Selftimer Vol. ............................. 48
Set up Menu ............................. 48
Shooting .................................... 14
Shooting Information ................. 53
Shooting Mode
Creative Zone ....................... 75
Av ...................................... 88
M ....................................... 90
P ....................................... 85
Tv ...................................... 86
Functions Available ............. 208
Image Zone ..................... 75, 76
Kids & Pets ....................... 76
Landscape ........................ 76
Movie ................................ 79
Night Snapshot ................. 76
Portrait .............................. 76
Special Scene ................... 77
Aquarium ...................... 78
Beach ........................... 78
Fireworks ...................... 78
Foliage .......................... 77
Indoor ........................... 77
Night Scene .................. 77
Snow ............................. 78
Stitch Assist ...................... 83
Shutter Button
Pressing Fully ....................... 15
Shutter Speed ..................... 86, 90
Shutter Volume ......................... 48
Slow Synchro Function ....... 46, 94
Smooth Continuous Shooting ... 91
Sound Memo .......................... 150
Speaker .................................... 38
Special Scene ........................... 77
Spot AE Point Frame ........ 53, 115
Standard ................................... 55
Start-up Image .......................... 49
Start-up Vol. .............................. 48
Still Image
Shooting ............................... 14
Viewing ................................. 17
Stitch Assist .............................. 83
System Requirements .............. 24
T
Telephoto .................................. 60
Transition ................................ 142
Transition Effects .................... 142
Troubleshooting ...................... 162
V
Video Output System ................ 50
Video System ......................... 161
Volume ..................................... 48
W
White Balance ........................ 116
Wide Angle ............................... 60
Wrist Strap .............................. 1, 9
Z
Zoom ........................................ 60
Zoom Lever .............................. 40
207
Disclaimer
• While every effort has been made to ensure that the information
contained in this guide is accurate and complete, no liability can be
accepted for any errors or omissions.
• Canon reserves the right to change the specifications of the
hardware and software described herein at anytime without prior
notice.
• No part of this guide may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any
form, by any means, without the prior written permission of Canon.
• Canon makes no warranties for damages resulting from corrupted
or lost data due to a mistaken operation or malfunction of the
camera, the software, SD memory cards (SD cards), personal
computers, peripheral devices, or use of non-Canon SD cards.
Trademark Acknowledgments
• Microsoft, Windows Vista and the Windows Vista logo are
trademarks of Microsoft Corporation in the United States and/or other
countries.
• Macintosh, the Mac logo, QuickTime and QuickTime logo are
trademarks of Apple Inc., registered in the U.S. and other countries.
• The SDHC logo is a trademark.
Copyright © 2007 Canon Inc. All rights reserved.
208
Functions Available in Each Shooting Mode
Functions Available in Each Shooting Mode
Set each function according to the shooting conditions and then shoot.
Only functions with settings that change with the shooting mode are
listed here.
Shooting Mode
Function
Exposure Compensation (p. 114)
Auto
ISO Speed (p. 110)
High ISO Auto
ISO 80/100/200/400/800/1600
White Balance
(p. 116)
Drive Mode
(pp. 91, 67)
Auto
Day Light, Cloudy, Tungsten,
Fluorescent, Fluorescent H,
Custom
Single Shot
Continuous
Continuous Shooting AF1)
Self-Timer (2 sec./10 sec.)
Self-Timer (Custom)
My Colors (p. 119)
Flash Exposure Compensation (p. 122)
Flash Output Control (p. 123)
Metering System
(p. 115)
Evaluative
Center-weighted Avg.
Spot
Number of Recording Pixels/Compression Selection
(still images) (pp. 69, 70)
640 × 480, 30 fps/30 fps LP
Number of Recording
320 × 240, 30 fps
Pixels/Frame Rate
Selection (movies) (p. 82) 160 × 120, 15 fps
Av/Tv Setting (pp. 88, 86)
Program Shift (p. 108)
AE/FE Lock (still images) (pp. 107, 109)
Exposure Shift (movies) (p. 81)
Shooting Zone (Macro) (p. 66)
Manual Focus (p. 105)
Auto
Flash5) (p. 65)
On
Off
LCD Monitor Setting
(p. 51)
LCD Monitor (no information)
LCD Monitor (information view)
Stitch Direction Selection (Right, Left) (p. 83)
–
{
{
–
{
–
{
–
–
{
–
{
–
–
{
{
–
{
{
{
–
–
{
–
{
{
–
{
–
–
{
–
–
{
{
–
–
–
{
–
–
{
–
–
{
–
{
–
–
{
–
–
{
–
–
{
–
{
–
–
{
–
–
{2) {
–
–
–
–
–
–
–
–
–
{
–
–
{
{
–
{
{
{
{
–
–
–
–
{
{
{
–
–
–
{
{
–
–
–
{
–
–
–
{
{
{
–
–
–
{
{
–
–
–
–
{
{
{
{
–
{
{
{
{
–
{
{
{
{
{
{
{
{
{
–
–
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{
{
{
{
{
–
–
–
{
–
–
–
{
{
–
{
{
{
{
–
–
–
–
{3)
{
{
–
{
{
–
{
{
{
{
–
–
–
–
{4)
{
{
–
{
{
–
{
{
{
{
–
–
–
–
–
{
{
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
{
–
{
–
{
{
{
–
Functions Available in Each Shooting Mode
Reference Pages
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
{
{
–
–
{
–
–
–
–
–
–
–
–
–
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
–
–
–
{
–
–
{
{
{
{
{
{
{
{
{
{
{
–
–
–
–
–
–
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
–
{
{
{
{
{
{
–
–
–
–
–
–
–
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
–
{
{
{
{
{
{
–
–
–
–
–
–
–
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
{
{
{
{
{
{
{
–
–
–
–
–
–
–
–
–
–
–
–
{
{
{
–
–
–
–
–
–
–
–
{
{
–
{
{
{
{
–
p. 114
p. 110
p. 116
pp. 91, 67
p. 119
p. 122
p. 123
p. 115
pp. 69, 70
p. 82
pp. 88, 86
p. 108
pp. 107, 109
p. 81
p. 66
p. 105
p. 65
p. 51
p. 83
209
210
Functions Available in Each Shooting Mode
Shooting Mode
Function
AF Frame (p. 98)
Face Detect
Center
AF Frame Size (p. 100)
Digital Zoom (p. 61)
Standard
Digital Tele-converter
Slow Synchro (p. 94)
Flash
Flash Adjust (Off) (p. 121)
Red-Eye (p. 93)
Safety FE (p. 124)
Safety Shift (p. 89)
Auto ISO Shift (p. 111)
button/On
Off
MF-Point Zoom (p. 105)
Safety MF (p. 106)
Self-Timer (Custom Timer) (p. 68)
AF Mode (p. 97)
Continuous
Single
AF-assist Beam
Review (Rec. review) (p. 16)
Review Info (p. 95)
Disp. Overlay (p. 127)
IS Mode (p. 73)
Off
Detailed / Focus Check
Grid Lines
3:2 Guide/Both
Continuous
Shoot Only / Panning
Date Stamp (p. 72)
Set
button (p. 125)
{
{
{
{
{
{6)
{7)
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{6)
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
–
–
–
{
–
{
–
–
–
{
–
–
–
{
{
{
{
{
–
–
–
{
{
–
{
{
{
–
{
{
–
–
{
–
–
{
{
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
–
{
–
–
–
–
–
–
–
{
–
{
–
–
{
{
–
–
–
{
–
{
–
–
{
–
{
–
–
–
–
–
–
–
–
–
{
–
{
–
–
{
{
–
–
–
{
–
{
–
–
{
{ : Setting available or optimum value is automatically set by the camera. As a rule, with the “Stitch Assist”, only
the first image is available.
– : Not available
: The settings are retained even when the camera power is turned off.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Set to Continuous Shooting LV when Manual Focus or
is selected.
Postcard Date Imprint and Widescreen are not available.
Only
(Aperture Value) can be set.
Only
(Shutter Speed) can be set.
Cannot fire when flash is not raised.
Always set to on.
Cannot be set to on.
Only available when Flash-on is selected.
Functions Available in Each Shooting Mode
Reference Pages
{
{
–
{
{
–
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{6)
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{6)
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
–
–
{
–
–
–
{
{
{
{
–
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
{6)
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
–
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
–
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
–
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
{
–
–
{
–
–
–
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
–
{
–
{
{
–
–
–
–
–
–
{
–
–
{
–
{
–
{
{
{
{
{
{
{
{
{
{
{
–
{
{
–
–
{
–
–
–
{
{
{
{
{
{
{8)
{
{
{
{
{
{
{
{
{
p. 98
p. 100
p. 61
p. 94
p. 121
p. 93
p. 124
p. 89
p. 111
p. 105
p. 106
p. 68
p. 97
—
p. 16
p. 95
p. 127
p. 73
p. 72
p. 125
211
CEL-SH1JA211
© 2007 CANON INC.