DATA VAULT
/) SETUP POSTER
ENGLISH
What's Inside?
- 8 66
HP Data Yau Power Cable Elhérnet Sofware and
(RJ45] Cable Documentation
Before you begin, you will need
* One or more computers running Microsoft Windows® Vista, Windows” XP, Windows™ MCE, or Mac” OS X 10.5 or later*
* À router with DHCP enabled to provide an automatic IP address to the device
* A broadband connection, such as DSL or cable, is required for remote access functionality
* 100 Mbps to 1000 Mbps (Gigabit Ethernet) wired network connection
“See the online help for a detailed list of supported operating systems.
Set up your HP Data Vault
Remote Devices HP Data Vault
С
Г
U
Desktop PCs & iMacs |
Notebooks 6: MacBooks |
+ Requires wired connection to a router; remote features require a broadband Intemet connection.
Met intended to be used at YDU workplaces.
Internal
Vv IM PO RIANT Open the HP Data Vault door and remove the foam packaging before connecting the device to your netwark and fuming it on,
O Plug the power cord into the device and the other end into an electrical outlet.
© Connect one end of the Ethernet cable to the device and the other end to an available Ethernet port on your router.
© Press the Power button on the back of the device.
The device will take approximately 60 seconds to start up. The LED indicator lights blink and change color throughout
the startup process. Wait for all of the device LED lights to be pulsating agua white before proceeding with the
software installation.
Note: Firewall and antivirus sofware installed on your computer may prevent the computer from locating the HP Data Vault on your network,
To ensure open communication between the computer and the device, complete the following steps prior to running the Software Installation
Disc:
* Open the firewall and antivirus software and update the trusted programs list
* Verity that both applications are set to “Leam” new programs
* Install any updates for the firewall or antivirus software
Install the software on your first computer
The first installation must be on a Windows computer. Subsequent installations can be on a
Windows or Mac computer.
To install the software, you must also have administrative privileges. Complete the following
instructions to add administrative privileges to a user account on your computer.
WINDOWS® VISTA
* Click Start, Control Panel, and then User Accounts and Family Safety
WINDOWS® XP
* Click Start, Control Panel, and then double-click User Accounts
MAC" OS X 10.5 OR LATER
* Click System Preferences, Accounts, and check Allow user to administer this computer
v IMPORTANT Complete the software installation:
IF required, HP Update © Insert the Software Installation Disc into a network computer running Windows.
Windows Installer 3.1, © Follow the instructions on the computer to install the HP Data Vault.
and .NET 20 or later @ Microsoft encourages you to accept their recommended settings for Windows Update
sofware may be
installed. These and Customer Experience settings.
installations may restart @ Enter your Windows Home Server password to logon once the installation is complete.
your computer and
lake several minutes. | | | . |
Repeat the software installation on each network computer running either Windows® or
Mac® OS X 10.5 or later.
CONGRATULATIONS! You are ready to Start Using Your HP Data Vault.
Adding a SATA Drive
о © © O o
Open door Press lever Lift handle Remove tray Fold down flap
Insert pins into drive Flex right rail With handle up, Press handle down Close door
mounting holes and insert pins replace drive and tray
NOTE: Within a few seconds the light bar for the new hard drive pulsates aqua white.
Adding the Drive to Server Storage
4 CAUTION When adding a hard drive to server storage, the hard drive is formatted and any data will be lost. Back up any important files that
are on the hard drive before adding it to server storage.
Complete the software installation:
O At the computer, double-click the [uf) Windows Home Server icon in the system tray.
© Log on to the Windows Home Server Console.
© Click the Server Storage tab.
O Select the drive and click Add.
O Follow the instructions in the Add a Drive wizard.
| For warranty and support information, see the Warranty and Support Guide. pdf
on the Software Installation Disc.
©) Please visit www.hp.com/ support for additional information and technical support. |
Copyright ©2009 HewletPackard Development Company L.P. Printed in China, HP Part 4579700-001
">
