advertisement
User manual
HW-J6500R
HW-J6501R
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com/register
GETTING STARTED
GETTING STARTED
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol indicates that important literature concerning operation and maintenance has been included with this product.
Class II product : This symbol indicates that it does not require a safety connection to electrical earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information.
WARNING
: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION
: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• This apparatus shall always be connected to a AC outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:– The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
2
GETTING STARTED
PRECAUTIONS
68.6 mm
99.1mm
99.1mm
99.1mm
Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.
Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions.
Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately
2 hours until the unit has reached room temperature before using.
The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire.
Do not short circuit, disassemble, or overheat the battery.
Danger of explosion if the battery is replaced incorrectly.
Replace only with the same or equivalent type.
WARNING: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the remote and make sure to keep it away from children. If you think the battery might have been swallowed or placed inside any part of the body, seek immediate medical attention.
3
GETTING STARTED
CONTENTS
2 GETTING STARTED
2 Safety Information
5 What’s Included
6 DESCRIPTIONS
6 Top / Front Panel
7 Rear / Bottom Panel
8 Remote Control
10 INSTALLATION
10 Installing the Soundbar
13 Placing the Soundbar on a TV stand
13 Installing the Soundbar as a Free-Standing
14 CONNECTIONS
14 Connecting the Subwoofer
16 Connecting to a TV
17 Connecting to a TV Using an HDMI (Digital)
17 Connecting to a TV Using a Digital Optical
18 Connecting to External Devices
19 Optical or Analogue Audio Cable
20 FUNCTIONS
20 Input Mode
21 Bluetooth
23 Using the Multiroom App
25 Using the Network Standby On
Function
26 Software Update
28 TROUBLESHOOTING
28 Troubleshooting
29 APPENDIX
29 Specifications
●
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
●
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the user manual has not been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user manual has not been read).
● You will be informed of the administration fee amount before a technician visits.
4
GETTING STARTED
WHAT’S INCLUDED
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
+
Icons used in this manual
Icon Term
Caution
Definition
Indicates a situation where a function does not operate or settings may be cancelled.
Note
Indicates tips or instructions on the page that help you operate a function.
Check for the supplied accessories shown below.
Remote Control /
Lithium Battery (3V : CR2032)
430
Wall Mount Guide
Power Cord : 2 EA AC/DC Adapter
Holder-Fix Mount : 2 EA Bracket-Wall : 2 EA
●
The appearance of the accessories may differ slightly from the illustrations above.
5
DESCRIPTIONS
DESCRIPTIONS
TOP / FRONT PANEL
(Power) Button
Turns the power on and off.
VOL. - / +
Controls the volume level.
The numeric value of the volume level appears in the front panel display.
Display
Displays the current mode.
(Source) Button
Selects the D.IN, AUX, HDMI, BT, or TV input.
●
While the unit is powered on, pressing the
button for more than 3 seconds sets the button to act as the (Mute) button.
To cancel the (Mute) button setup, press the button for more than
3 seconds again.
●
When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.
● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
● If you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio Setup menu of your TV. Refer to the owner's manual supplied with your TV.
6
DESCRIPTIONS
REAR / BOTTOM PANEL
AUX IN
Connect to the Analogue output of an external device.
HDMI IN
Inputs digital video and audio signals simultaneously using an
HDMI cable. Use when connecting a supported external device.
OPTICAL IN (D.IN)
Connect to the digital
(optical) output of an external device.
HDMI OUT (TV-ARC)
Outputs digital video and audio signals simultaneously using an HDMI cable.
DC 14V
AUX IN
OPTICAL IN
SPK ADD Wi-Fi SETUP
HDMI IN
LAN SERVICE
LABEL
LAN SERVICE
DC14V
Wi-Fi SETUP SPK ADD
DC 14V
(Power Supply In)
Connect the DC power adaptor to the power supply jack, and then connect the AC power adaptor plug to a wall outlet.
Wi-Fi SETUP
Press this button to connect your Soundbar to your network using
Wi-Fi setup. (Requires a smart device and the
Samsung Multiroom
SPK ADD
Press the button to connect the Soundbar to a Samsung HUB
(purchased separately) or a network. (Requires a smart device and the
Samsung Multiroom
SERVICE
To upgrade the product's software through the USB
Port.
LAN
Lets you connect to a network using a LAN cable.
●
When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between components are complete.
● Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
7
DESCRIPTIONS
REMOTE CONTROL
SOURCE
Press to select a source connected to the Soundbar.
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
Repeat
The Repeat function is available only when playing back music from Songs on phone or DMS of Samsung Multiroom app.
OFF - REPEAT
: Cancels Repeat Playback.
TRACK - REPEAT
: Plays a track repeatedly.
ALL - REPEAT
: Plays all tracks repeatedly.
Skip Forward
If there is more than one file on the device you are playing, and you press the
]
button, the next file is selected.
SOUND CONTROL
Press to select
TREBLE
,
BASS
, or
AUDIO SYNC
. Then, use the
[
,
]
buttons to adjust the
TREBLE
or
BASS
volume from -3 ~ +3.
Press and hold the
SOUND CONTROL
button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz, and 10KHz are selectable and each can be adjusted to a setting between
-6 ~ +6.
If the Soundbar is connected to a digital TV and the video appears out of sync with the audio, press the
SOUND CONTROL
button to sync the audio with the video. Use the
[
,
]
buttons to set the audio delay between
0 ms ~ 300 ms. In TV mode, and BT mode, the Audio Sync function may not available.
Anynet+
Press the
Anynet+
button to turn the Anynet+ function on or off.
(Default : Auto Power Link OFF,
ON - ANYNET+
/
OFF - POWER LINK
or
OFF
- ANYNET+
/
ON - POWER LINK
). The Anynet+ function lets you control the
Soundbar with the remote from an Anynet+ compatible Samsung TV. The
Soundbar must be connected to the TV via an HDMI cable.
* Auto Power Link
Synchronizes the Soundbar to a connected Optical source via the Optical
jack so it turns on automatically when you turn on your TV. (See page 18)
Auto Power Link function is only available in the
D.IN
mode.
You can also activate
Wi-Fi SETUP
function by pressing and holding
Anynet+
button on the remote for over 7 seconds.
● Operate the TV using the TV's remote control.
8
DESCRIPTIONS
Power
Turns the Soundbar on and off.
Volume
Adjusts the volume level of the unit.
Play / Pause
Press the
p
button to pause a file temporarily.
Press the
p
button again to play the selected file.
Skip Back
If there is more than one file on the device you are playing, and you press the
[
button, the previous file is selected.
SOUND EFFECT
You can select from 6 sound modes -
STANDARD (Original Sound)
,
MUSIC
,
CLEAR VOICE
,
SPORTS
,
MOVIE
, and
NIGHT MODE
- depending on the content you want to listen to.
Select the
STANDARD
mode if you want to enjoy the original sound.
SOUND
Surround Sound adds depth and spaciousness to the sound. Pressing the
SOUND
button repeatedly cycles through the Surround Sound settings :
ON - SURROUND SOUND
,
OFF - SURROUND SOUND
STREAMING MUSIC
Press
STREAMING MUSIC
button to listen to an Internet radio station. Each time you press this button, the Soundbar switches to the next default station, cycling through the 3 default stations.
To use the
STREAMING MUSIC
function, the Soundbar must be connected to
DRC (Dynamic Range Control) *
Lets you apply dynamic range control to Dolby Digital.
Press and hold the
STREAMING MUSIC
button to toggle the DRC (Dynamic
Range Control) function
ON
and
OFF
.
WOOFER
Press the
WOOFER
button. Then, use the
[
,
]
buttons to adjust the
Subwoofer volume from -12, -6 ~ +6.
You can also activate
SPK ADD
function of the Soundbar by pressing and holding
WOOFER
button of the remote for over 5 seconds.
INSTALLING THE BATTERY IN THE REMOTE CONTROL
1.
Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.
2.
Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.
3.
Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.
9
INSTALLATION
INSTALLATION
INSTALLING THE SOUNDBAR
INSTALLING THE WALL MOUNT
+
Installation Precautions
●
Install on a vertical wall only.
● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set.
● Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the unit on a different wall that can support the unit's weight.
●
Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs.
●
Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.
-
Diameter : M5
-
Length: 35 mm or longer recommended.
●
Connect cables from the unit to external devices before you install it on the wall.
● Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
5 cm or more
1.
Place the installation guide against the wall surface.
•
The installation guide must be level.
•
If the TV is mounted on the wall, install the Soundbar at least 5 cm below the TV.
10
INSTALLATION
Center Line
Center Line
2.
Mark the location where the screws will go through on the wall, and then remove the installation guide. Next, drill holes for the screws using an appropriately sized drill bit.
3.
Fasten the 2
Bracket-Wall
pieces firmly to the wall at the marked locations using the appropriate screws.
4.
Attach the Soundbar to the 2
Bracket-Wall
pieces as shown in the illustration.
11
INSTALLATION
SERVICE
LAN HDMI OUT
HDMI IN
Wi-Fi SETUP SPK ADD
OPTICAL IN
AUX IN
DC 14V
5.
Insert a
Holder-Fix Mount
into each hole on the product’s bottom side. Tighten each
Holder-Fix Mount
to fix the Soundbar to the 2
Bracket-Wall
pieces.
●
Do not hang onto the installed unit and avoid striking or dropping the unit.
●
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or damage the product.
● When the unit is installed on a wall, please make sure that children do not pull any of the connecting cables, as this may cause it to fall.
●
For the optimal performance of a wall mount installation, install the speaker system at least 5 cm below the
TV, if the TV is mounted on the wall.
● For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely to fall.
12
PLACING THE SOUNDBAR ON A TV STAND
Place the Soundbar on a TV stand.
INSTALLATION
1.
Align the Soundbar’s centre with the centre of the base of the TV, and then carefully push it onto the stand as far as it will go, as shown in the illustration. Be careful not to unbalance the TV.
INSTALLING THE SOUNDBAR AS A FREE-STANDING UNIT
1.
Centre the Soundbar on the flat area in front of the TV.
● Install it on a level and firm surface.
13
CONNECTIONS
CONNECTIONS
●
Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.
● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SUBWOOFER
CONNECTING TO THE SUBWOOFER AUTOMATICALLY
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer are turned on.
•
When the subwoofer is completely connected, the blue LED Link Indicator on the subwoofer stops blinking and glows continuously.
CONNECTING TO THE SUBWOOFER MANUALLY
If the blue LED light does not stop blinking when the main unit and subwoofer are turned on, please set the ID by following the steps below.
●
Important: Before you begin, put the battery into the remote. See page 9 for instructions.
POWER
1.
Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2.
Press the
ID SET
button on the back of the subwoofer with a small, pointed object for 5 seconds.
•
The STANDBY indicator turns off and the LINK indicator (Blue LED) blinks quickly.
3.
While the main unit is powered off (in STANDBY mode), press and hold the (Mute) on the remote control for 5 seconds.
4.
The
ID SET
message appears on the Soundbar's display.
5.
To finalise the link, turn the main unit’s power on while the subwoofer’s Blue LED blinks.
•
The main unit and the subwoofer should now be linked (connected).
•
The LINK indicator (Blue LED) on the subwoofer should be glowing continuously and not blinking.
•
If the LINK indicator is not solid blue, the linking process has failed. Turn off the main unit and start again from
Step 2.
•
You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect.
14
CONNECTIONS
●
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
● If the main unit is powered off,the wireless subwoofer will in standy mode and the STANDBY LED on the front will blink Red directly. (no blue LED).
●
If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.
● The maximum transmission transmission distance of the wireless signal between the main unit and subwoofer is about 10 meters, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the wireless signal cannot penetrate metal.
● If the main unit doesn't make a wireless connection, follow steps 1-5 on the previous page to re-set the connection between the main unit and wireless subwoofer.
●
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture.
●
For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions.
LED INDICATOR LAMP STATUS ON SUBWOOFER
LED Status
Red On
Description
Standby (with the Soundbar main unit turned off)
Connection failed
Resolution
Check the power supply to the
Soundbar main unit
Connect again
(refer to the instructions on manual connection in the user manual)
Blue
On
Successfully connected
(normal operation)
Standby (with the Soundbar main unit turned off)
-
Red and blue
Blinking
Blinking
Connection failed
Malfunction
Check the power supply to the
Soundbar main unit
Connect again
(refer to the instructions on manual connection in the user manual)
Contact the service centre.
15
CONNECTIONS
CONNECTING TO A TV
●
Important: Before you begin, put the battery into the remote. See page 9 for instructions.
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the
TV SoundConnect function.
Connect
1.
Turn on the TV and Soundbar.
2.
Press the mode.
button on the main unit’s top panel or the
SOURCE
button on the remote control to select the
3.
On the TV, a message asking whether to enable the TV SoundConnect function appears.
TV
4.
Select
<Yes>
using the TV's remote control to finish connecting the TV and Soundbar.
●
If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select
Add New Device
, and set
Add New Device
to
ON
. Then, try again.
● Switching the Soundbar’s mode from TV to another mode automatically terminates TV SoundConnect.
●
To connect the Soundbar to another TV, the existing connection must be terminated.
●
To terminate the existing connection, press and hold the
p
button on the remote for 5 seconds or switch to another mode. To connect to the other TV, follow Steps 1 through 4 above.
●
The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on.
Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin. (For further information, refer to the TV’s user manual.).
●
If your Samsung TV was released before 2014, check the SoundShare setting menu.
● If the distance between the TV and Soundbar exceeds 10 meters, the connection may not be stable or the audio may stutter. If this occurs, relocate the TV or Soundbar so that they are within operational range, and then re-establish the TV SoundConnect connection.
● TV SoundConnect Operational Ranges:
-
Recommended pairing range: within 2 meters.
-
Recommended operational range: within 10 meters.
● The Play/Pause, Next, and Prev buttons on the Soundbar or Soundbar's remote do not control the TV.
16
CONNECTIONS
CONNECTING TO A TV USING AN HDMI (DIGITAL) CABLE
HDMI Cable
(not supplied)
HDMI IN
DC 14V
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT
(TV-ARC)
LAN 5V 0.5A
1.
Connect an HDMI cable (not supplied) from the
HDMI OUT (TV-ARC)
jack on the back of the product to the
HDMI IN jack on your TV.
2.
Press the the
D.IN
mode.
button on the top panel of the Soundbar or the
SOURCE
button on the remote control to select
● HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
●
If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 14 mm.
●
Anynet+ must be turned on.
● This function is not available if the HDMI cable does not support ARC.
CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE
Optical Cable
(not supplied)
OPTICAL OUT
OPTICAL IN
DC 14V
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT
(TV-ARC)
LAN 5V 0.5A
1.
Connect the
OPTICAL IN
(Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
2.
Press the the
D.IN
mode.
button on the top panel of the Soundbar or the
SOURCE
button on the remote control to select
17
CONNECTIONS
+
Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON to have the Soundbar turn on automatically when you turn the TV on.
AUTO POWER LINK
ON
OFF
Display
OFF - ANYNET+ / ON - POWER LINK
ON - ANYNET+ / OFF - POWER LINK
1.
Connect the Soundbar and a TV with a digital optical cable (not supplied).
2.
Press the
D.IN
mode.
button on the main unit’s top panel or the
SOURCE
button on the remote control to select the
3.
Press the
Anynet+
button on the remote control to toggle the Auto Power Link function on and off.
● Depending on the connected device, Auto Power Link may not function.
CONNECTING TO EXTERNAL DEVICES
HDMI CABLE
HDMI is the standard digital interface for connecting to TVs, projectors, DVD players, Blu-ray players, set top boxes, and more.
HDMI prevents any degradation to the signal due to conversion to analogue and maintains the video and audio quality of the original digital source.
HDMI Cable
(not supplied)
Digital Devices
HDMI OUT HDMI IN
DC 14V
AUX IN
OPTICAL IN
HDMI IN
LAN 5V 0.5A
HDMI IN
1.
Connect an HDMI cable (not supplied) from the
HDMI IN
jack on the back of the product to the HDMI OUT jack on your digital device.
2.
Press the button on the top panel of the Soundbar or the
SOURCE
button on the remote control to select the
HDMI
mode.
18
CONNECTIONS
OPTICAL OR ANALOGUE AUDIO CABLE
This unit comes equipped with one digital optical in jack and one analogue audio (AUX) in jack, giving you two ways to connect it to external devices.
Optical Cable
(not supplied)
OPTICAL OUT OPTICAL IN
BD / DVD player /
Set-top box /
Game console
AUX OUT
Audio Cable
(not supplied)
AUX IN
DC 14V
AUX IN
OPTICAL IN
HDMI IN
LAN 5V 0.5A
+
AUX Cable
1.
Connect
AUX IN
(Audio) on the main unit to the AUDIO OUT jack of the Source Device using an audio cable.
2.
Press the the
AUX
mode.
button on the top panel of the Soundbar or the
SOURCE
button on the remote control to select
+
Optical Cable
1.
Connect
OPTICAL IN
(Audio) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable.
2.
Press the the
D.IN
mode.
button on the top panel of the Soundbar or the
SOURCE
button on the remote control to select
19
FUNCTIONS
FUNCTIONS
INPUT MODE
Press the you want.
button on the main unit’s top panel or the
SOURCE
button on the remote control to select the mode
Input mode
Optical Digital input
ARC (HDMI OUT) input
AUX input
HDMI input
BLUETOOTH mode
TV SoundConnect
Display
D.IN
AUX
HDMI
BT
TV
AUTO POWER DOWN FUNCTION
The unit turns off automatically in the following situations.
●
D.IN / HDMI / BT / TV Mode
-
If there is no audio signal for 15 minutes.
●
AUX Mode
-
If the AUX cable is disconnected for 15 minutes.
If there is no KEY input for 8 hours when the AUX cable is connected. (Auto Power Down function can be turned off only in that case.)
To turn off Auto Power Down function, while in
AUX
mode, press and hold the
p
button for 5 seconds.
ON - AUTO POWER DOWN
/
OFF - AUTO POWER DOWN
appears on the display.
20
FUNCTIONS
BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!
TO CONNECT THE SOUNDBAR TO A BLUETOOTH DEVICE
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
Bluetooth device
1.
Press the mode.
button on the main unit’s top panel or the
SOURCE
•
You will see
BT READY
on the front display of the Soundbar.
button on the remote control to select the
BT
2.
Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's user manual.)
3.
Select
"[Samsung] HW-Jxxxx"
from the list.
•
When the Soundbar is connected to the Bluetooth device, it will display [
Bluetooth device name
]
BT
on the front display.
•
The device name can only be displayed in English. An underline " _ " will be displayed if the name is not in
English.
•
If the Bluetooth device has failed to pair with the Soundbar, delete the previous "
[Samsung] HW-Jxxxx
" found by the Bluetooth device and have it search for the Soundbar again.
4.
Play music on the connected device.
•
You can listen to the music playing on the connected Bluetooth device over the Soundbar.
•
In
BT
mode, the Play / Pause / Next / Prev functions are not available. However, these functions are available on Bluetooth devices supporting AVRCP.
● If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
● Only one Bluetooth device can be paired at a time.
●
The Bluetooth connection will be terminated when you turn the Soundbar off.
● The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:
-
If there is a strong electrical field around the Soundbar.
-
If several Bluetooth devices are simultaneously paired with the Soundbar.
-
If the Bluetooth device is turned off, not in place, or malfunctions.
●
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference.
21
FUNCTIONS
● The Soundbar supports SBC data (44.1kHz, 48kHz).
●
Connect only to a Bluetooth device that supports the A2DP (AV) function.
● You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.
● Once you have paired the Soundbar to a Bluetooth device, selecting "
[Samsung] HW-Jxxxx
" from the device's scanned devices list will automatically change the Soundbar to
BT
mode.
Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)
●
Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying
BT READY
.
● In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
TO DISCONNECT THE BLUETOOTH DEVICE FROM A
SOUNDBAR
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.
● The Soundbar will be disconnected.
●
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
BT DISCONNECTED
on the front display.
TO DISCONNECT THE SOUNDBAR FROM A BLUETOOTH
DEVICE
Press the
SOURCE
button on the remote control or the another mode or turn off the Soundbar.
button on the product's top panel to switch from
BT
to
● The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters.
●
The Soundbar automatically turns off after 15 minutes in the Ready state.
+
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short wireless connection.
● A Bluetooth device may cause noise or malfunction, depending on usage, if:
-
A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the
Soundbar.
-
It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
-
It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.
●
Pair the Soundbar with the Bluetooth device while they are close together.
● The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
● In poor reception areas, the Bluetooth connection may not work properly.
●
The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut off if the
Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.
● This wireless device may cause electric interference during its operation.
22
FUNCTIONS
USING THE MULTIROOM APP
The Samsung Multiroom app lets you connect the Soundbar to a smart device, your network, and the Internet. Once the Soundbar is connected to a smart device that has the Multiroom App installed, you can also connect the
Soundbar and multiple Samsung Multiroom devices together wirelessly and play audio through them.
BEFORE YOU BEGIN
+
Communication Basics
Smart Device:
Android or iOS
(App Control)
Internet Wireless Router
Requirements:
1.
A Wireless Router and a Smart Device
2.
The wireless router must be connected to the Internet.
3.
The smart device must be connected to the router via a Wi-Fi connection.
INSTALLING THE SAMSUNG MULTIROOM APP
To use the Soundbar with the Samsung Multiroom App, you must download and then install the Samsung Multiroom
App on your smart device. You can download the app from Google Play or the App Store. With the Samsung
Multiroom App installed, you can play music on your Soundbar that is stored on your smart device, located on other connected devices, provided by other content providers, or streamed from Internet radio stations.
+
Android or iOS
Download the Samsung Multiroom app from Google Play or the App Store of your smart device.
* Market search : Samsung Multiroom
or
23
FUNCTIONS
+
Launching the Samsung Multiroom App
To launch the Samsung Multiroom app, tap the Multiroom app icon on your smart device.
CONNECTING THE SOUNDBAR TO YOUR NETWORK
On your smart device, select the Samsung Multiroom app. Follow the directions on your smart device’s screen.
You can use the following music sources with the Samsung Multiroom app.
- Music files stored in your mobile phone, various music sources, and Internet radio.
[Samsung] HW-Jxxxx
Music in mobile phone
Internet radio Music service
●
Use Cat 7 (*STP Type) cable for the connection.
* Shielded Twist Pair
24
FUNCTIONS
USING THE NETWORK STANDBY ON
FUNCTION
The Network Standby On function becomes available if a wireless connection has been properly established between a smart device and the Soundbar. This function turns on the Soundbar automatically when a smart device attempts to connect to the Soundbar via Bluetooth or Wi-Fi. If you turn the Soundbar on via a Bluetooth connection, its input mode is set to BT automatically. To turn the Soundbar on via Wi-Fi, you must have the Samsung Multiroom App installed on your smart device.
1.
Connect the smart device to your Soundbar.
2.
Turn the Network Standby On function on by pressing the
]
button on the Soundbar remote for more than
5 seconds. You can turn the function off by pressing the
]
button again for more than 5 seconds.
●
Network Standby On is available only if the Soundbar is listed among the smart device’s paired devices.
(The Smart device and the Soundbar must have been previously paired at least once.)
● Soundbar will appear in the smart device’s searched devices list only when the Soundbar is displaying [BT
READY] or [WiFi READY].
●
In the TV SoundConnect mode, the Soundbar cannot be paired to another smart device.
● If the Network Standby On function did not work:
-
The Network Standby On is set to Off. Set it to ON.
● The Wi-Fi connection to the Soundbar will be terminated if the Soundbar’s power cord is disconnected or the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.
25
FUNCTIONS
SOFTWARE UPDATE
DC 14V
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT
(TV-ARC)
LAN SERVICE
LAN SERVICE
UPDATING WITH USB
Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar.
Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung call centre to receive more information about downloading update files.
+
Updating Procedure
1.
Follow the steps below to download the product software:
Go to the Samsung website at (samsung.com/sec)
search for the model name - select the customer support option (the option name is subject to change)
2.
Save the downloaded software to a USB stick and select "Extract to the folder name" to unzip the folder.
3.
Turn off the Soundbar and connect the USB stick containing the software update to the USB port.
4.
Disconnect the power cord, reconnect it, and then turn on the Soundbar.
5.
Turn on the Soundbar. Within 3 minutes,
UPDATE
is displayed and updating begins.
6.
After the update is complete, the Soundbar turns off and on again.
26
FUNCTIONS
+
If UPDATE was not displayed
1.
Turn off the Soundbar, connect the USB storage device that contains update files to the Soundbar’s USB port.
2.
Disconnect the power cord, reconnect it, and then turn on the Soundbar.
● Insert a USB device containing the firmware update into the USB port on the main unit.
● Updating firmware may not work properly if audio files supported by the Soundbar are stored in the USB storage device.
●
Do not disconnect the power or remove the USB device while updates are being applied. The main unit will turn off automatically after completing the firmware update.
●
After update is completed, the user setup in Soundbar is initialised. We recommend you write down your settings so that you can easily reset them after the update. Note that updating firmware resets the subwoofer connection too.
If the software update fails, check that the USB stick is not defective.
● Mac OS users should use MS-DOS (FAT) as the USB format.
●
Depending on the manufacturer, some USB devices may not be supported.
AUTO UPDATE
If the Soundbar is connected to the Internet, it will automatically check for the latest firmware and update when new firmware becomes available, even if it is turned off.
●
The Soundbar is configured to run Auto Update by default.
●
To use the Auto Update function, the Soundbar must be connected to the Internet.
● The Wi-Fi connection to the Soundbar will be terminated if its power cord is disconnected or the power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.
27
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
Before requesting service, please check the following.
The unit will not turn on.
• Is the power cord plugged into the outlet?
¼
Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
¼
Disconnect the power plug and connect it again.
Sound is not produced.
•
•
Is the Mute function on?
Is the volume set to minimum?
¼
Press the (Mute) button to cancel the Mute function.
¼
Adjust the volume.
The remote control does not work.
• Are the batteries drained?
• Is the distance between the remote control and main unit too far?
¼
Replace with new batteries.
¼
Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
•
•
•
Does your TV support TV SoundConnect?
Is your TV firmware the latest version?
Does an error occur when connecting?
¼
TV SoundConnect is supported by some Samsung
TVs released from 2012 on. Check your TV to see if it supports TV SoundConnect.
¼
Update your TV with the latest firmware.
¼
Contact the Samsung Call Centre.
¼
Reset TV SoundConnect and connect again.
To reset the TV SoundConnect connection, press and hold the
p
button for 5 seconds.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• Your subwoofer may not be connected to the main unit of the product.
¼
Try to connect your subwoofer again.
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
¼
Press the
WOOFER
button on your remote control to adjust the subwoofer's volume level (between -12, -6
~ +6).
28
APPENDIX
APPENDIX
SPECIFICATIONS
GENERAL
Weight
Main Unit
2.7 kg
Subwoofer (PS-WJ6500R / PS-WJ6501R)
6.8 kg
Dimensions
(W x H x D)
Main Unit
1078.0 x 47.5 x 129.0 mm
Subwoofer (PS-WJ6500R / PS-WJ6501R)
452.0 x 335.0 x 154.0 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
AMPLIFIER
Rated
Output
Power
Main Unit
Subwoofer (PS-WJ6500R / PS-WJ6501R)
22W x 6, 4 ohm, THD
168W, 3 ohm, THD
≦
≦
10%
10%
* Design, specifications and App screen are subject to change without prior notice.
* Nominal specification
-
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
-
Weight and dimensions are approximate.
-
For more information about the power supply and power consumption, refer to the label attached to the product.
a
Precaution
: The product will restart automatically if you turn on/off Wi-Fi/Ethernet.
Overall Standby Power Consumption (W)
(All the network ports are “ON” condition)
2.7W
Wi-Fi/Ethernet
Bluetooth
Port deactivation method
Port deactivation method
Press
Wi-Fi SETUP
button on the product for
30 seconds to turn Wi-Fi/Ethernet On / Off.
Press
SPK ADD
button on the product for
30 seconds to turn Bluetooth On / Off.
a
Open Source License Notice
-
For further information on Open Sources used in this product, please visit the website: http://opensource.samsung.com
a
License
-
The Spotify Software is subject to third party licences found here : www.spotify.com/connect/third-party-licenses.
For more information about Spotify Connect, please visit www.spotify.com/connect
29
APPENDIX
LICENCES
Manufactured under licence from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of
Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licencing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licencing LLC in the United States and other countries.
Wireless Models (including the frequency of 5.15GHz-5.35GHz)
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
This equipment may only be used indoors.
Wireless Models (excluding the frequency of 5.15GHz-5.35GHz)
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
30
EIRE
■ ■
This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However,
Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply
4.
This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country originally designed and anufactured. This warranty compact discs, videos or audio taper or any other related equipment or material.
with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
www.samsung.com
Samsung Electronics U.K. Ltd
Samsung Customer Support Centre
Selectapost 38, Sheffield, S97 3FJ
United Kingdom
United Kingdom
Tel : 0330 SAMSUNG (7267864)
EIRE
Tel : 0818 717100 www.samsung.com/ie/support
5.
This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear.
b) Cost relating to transport, removal or installation of the product.
c) Misuse, including the faiure to use this product for its normal purposes or incorrect installation.
d) Damage caused by Lightning, Water, Fire,
Acts of God, War, Public Disturbances, incorrect mains voltage, improper ventilation or any other cause beyond the control of
Samsung.
or safety standards in force in any Country other than the one for which the product
1.
www.samsung.com/uk/support
the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or
Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by
WARRANTY CONDITIONS
was originally designed and manufactured. This warranty will not cover, and no re-
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or replacement of parts due to normal wear and tear.
on the product has not been defaced.
purposes or incorrect installation.
warranty are the consumers sole rights and
c) Misuse, including the faiure to use this product for its normal purposes or incorrect installation.
defective part.
legislation to the contrary, the rights under this
Samsung, its subsidiaries and distributors shall not
d) Damage caused by Lightning, Water, Fire, Acts of God, War, Public
Disturbances, incorrect mains voltage, improper ventilation or any other cause
3.
Warranty repairs must be carried out by Authorised
Samsung Dealers or Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.
SAMSUNG ELECTRONICS (U.K.) LTD.
SAMSUNG ELECTRONICS (U.K.) LTD.
©2016 Samsung Electronics Co.,Ltd. All rights reserved
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
Centre.
Country
`
Europe
U.K
EIRE
GERMANY
FRANCE
ITALIA
SPAIN
PORTUGAL
NORWAY
DENMARK
FINLAND
SWEDEN
POLAND
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)
01 48 63 00 00
800-SAMSUNG (800.7267864)
LUXEMBURG 261 03 710
BELGIUM
HUNGARY
Contact Centre
0330 SAMSUNG (7267864)
0818 717100
0180 6 SAMSUNG bzw.
0180 6 7267864*
34902172678
808 20 7267
Web Site www.samsung.com/uk/support www.samsung.com/ie/support www.samsung.com/de/support
02-201-24-18
815 56480
70 70 19 70
030-6227 515
0771 726 7864 (0771-SAMSUNG) www.samsung.com/fr/support www.samsung.com/it/support www.samsung.com/es/support www.samsung.com/pt/support www.samsung.com/be_fr/support www.samsung.com/nl/support www.samsung.com/be/support
(Dutch) www.samsung.com/be_fr/ support (French) www.samsung.com/no/support www.samsung.com/dk/support www.samsung.com/fi/support www.samsung.com/se/support
* (koszt połączenia według taryfy operatora) www.samsung.com/pl/support
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648) www.samsung.com/hu/support
Country
AUSTRIA
Contact Centre
0800-SAMSUNG (0800-7267864)
[Only for Premium HA] 0800-366661
[Only for Dealers] 0810-112233
Web Site www.samsung.com/at/support
SWITZERLAND 0800 726 78 64 (0800-SAMSUNG)
CZECH
SLOVAKIA
CROATIA
BOSNIA
800 - SAMSUNG (800-726786)
0800 - SAMSUNG (0800-726 786)
072 726 786
055 233 999
MONTENEGRO 020 405 888
SLOVENIA
SERBIA
BULGARIA
ROMANIA
CYPRUS
080 697 267 (brezplačna številka)
011 321 6899
*3000 Цена в мрежата
0800 111 31 , Безплатна телефонна линия
*8000 (apel in retea)
08008-726-78-64 (08008-SAMSUNG)
Apel GRATUIT
8009 4000 only from landline, toll free
GREECE
LITHUANIA
LATVIA
ESTONIA
80111-SAMSUNG (80111 726 7864) only from land line (+30) 210 6897691 from mobile and land line
8-800-77777
8000-7267
800-7267 www.samsung.com/ch/support
(German) support (French) www.samsung.com/cz/support www.samsung.com/sk/support www.samsung.com/hr/support www.samsung.com/support www.samsung.com/support www.samsung.com/si www.samsung.com/rs/support www.samsung.com/bg/support www.samsung.com/ro/support www.samsung.com/gr/support www.samsung.com/lt/support www.samsung.com/lv/support www.samsung.com/ee/support
[Correct disposal of batteries in this product]
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product specific regulatory obligations e.g.
REACH visit: samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 4.1 channels 320 W Dolby Digital 5.1
- Audio Return Channel (ARC)
- Wireless
- Black
- Wireless Bluetooth