Samsung DVD-SH871M Benutzerhandbuch

DVD-SH871M
DVD
user manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/global/register
01587A-SH871M-XEU-ENG.indb 1
2008-04-17 오후 1:58:07
getting started
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates important
instructions accompanying the product.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to
rain or moisture.
CAUTION : HDD & DVD Recorder USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE HDD & DVD Recorder CORRECTLY
AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use
shielded cables and connectors for connections.
IMPORTANT NOTE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated
on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it
must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power
point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not
connect the plug to a mains jack, as there is a risk of shock hazard from the bared flexible cord.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the
mains plug shall be readily operable.
The product unit accompanying this user manual is licenced under certain intellectual property rights of certain third
parties. This licence is limited to private non-commercial use by end-user consumers for licenced contents.
No rights are granted for commercial use.
The licence does not cover any product unit other than this product unit and the licence does not extend to any
unlicenced product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in
combination with this product unit. The licence only covers the use of this product unit to encode and/or decode
audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this licence for
product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
2_ getting started
01587A-SH871M-XEU-ENG.indb 2
2008-04-17 오후 1:58:51
PRECAUTION
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8)
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two
blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
● GETTING STARTED
1)
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Handling Cautions
• Before connecting other components to this HDD & DVD Recorder, be sure to turn them all off.
• Do not move the HDD & DVD Recorder while a disc is being played, or the disc may be scratched or
broken, the HDD & DVD Recorder internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the HDD & DVD Recorder.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this HDD & DVD
Recorder. If this occurs, turn the HDD & DVD Recorder off and on again with the STANDBY/ON button, or
disconnect and then reconnect the AC power cord to the AC power outlet. The HDD & DVD Recorder will
operate normally.
• Be sure to remove the disc and turn off the HDD & DVD Recorder after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the HDD & DVD Recorder
for long periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
English _3
01587A-SH871M-XEU-ENG.indb 3
2008-04-17 오후 1:58:52
getting started
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
HDD (Hard Disk Drive)
The hard disk has a high storage density, which enables long recording durations and quick access to written
data. However, it can easily be damaged by shock, vibration or dust and should be kept away from magnets.
To avoid losing important data, observe the following precautions.
• Do not use the HDD & DVD Recorder in a place subject to extreme changes in temperature.
• Do not apply a strong shock to the HDD & DVD Recorder.
• Do not place the HDD & DVD Recorder in a location subject to mechanical vibrations or in an unstable
location.
• Do not place the HDD & DVD Recorder on top of a heat source.
• Do not disconnect the AC power cord while the power is on.
• Do not attempt to change the hard disk. This may result in a malfunction.
Should the hard disk be damaged, you cannot recover lost data. The hard disk is only a temporary storage
space.
Disc Handling
• Use discs with regular shapes. If an irregular disc (a disc with a special shape) is
used, this HDD & DVD Recorder may be damaged.
Holding discs
• Avoid touching the surface of a disc where recording is performed.
DVD-RAM, DVD±RW and DVD±R
• Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1 where available).
Do not use cleaners or cloths for CDs to clean DVD-RAM/±RW/±R discs.
DVD-Video, Audio-CD
• Wipe off dirt or contamination on the disc with a soft cloth.
Cautions on handling discs
• Do not write on the printed side with a ball-point pen or pencil.
• Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or
thinner.
• Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover
peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers available on the market.
• Do not load warped or cracked discs.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
4_ getting started
01587A-SH871M-XEU-ENG.indb 4
2008-04-17 오후 1:58:52
• Keep in a clean protection jacket.
• If you move your HDD & DVD Recorder suddenly from a cold place to a warm place, condensation may
generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect
the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again.
Disc Specifications
Disc Type
❖ DVD-Video
• A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32 subtitle
languages. It is equipped with MPEG-2 picture compression and Dolby digital surrounding, allowing you to
enjoy vivid and clear theatre quality images in the comfort of your own home.
• When switching from the first layer to the second layer of a dual-layered DVD Video disc, there may be
momentary distortion in the image and sound. This is not a malfunction of the unit.
• Once a DVD-RW/±R recorded in Video Mode is finalised, it becomes DVD-Video.
● GETTING STARTED
This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the
HDD.
You can also edit digital images on DVD-RAM/±RW discs or HDD.
❖ Audio CD
• An audio disc on which 44.1 kHz PCM Audio is recorded.
• Plays CD-DA format audio CD-R and CD-RW discs.
• The unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.
❖ CD-R/-RW
• Use a 700MB (80 minutes) CD-R/-RW disc. If possible, do not use a 800MB (90 minutes) or above disc, as
the disc may not play back.
• If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early
playback time, all recorded files may not play.
• Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to
burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may
vary depending on contents and discs.
❖ DVD±R Disc Playback and Recording
• Once a DVD±R recorded in Video Mode is finalised, it becomes DVD-Video.
• You can record onto the available space on the disc and perform editing functions such as giving titles to
discs and programmes and erasing programmes before finalising.
• When programming is erased from a DVD±R, that space does not become available. Once an area on a
DVD±R is recorded on, that area is no longer available for recording, whether the recording is erased or not.
• It takes about 30 seconds for the unit to complete recording management information after recording
finishes.
• This product optimizes the DVD±R for each recording. Optimizing is carried out when you start recording
after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing
is carried out too many times.
• Playback may be impossible in some cases due to the condition of recording.
• This unit can play back DVD±R discs recorded and finalised with a Samsung DVD video recorder. It may not
be able to play some DVD±R discs depending on the disc and the condition of the recording.
❖ DVD-RW Disc Playback and Recording
• Recording and playback can be performed on DVD-RW discs in both the Video and VR Modes.
• Once a DVD-RW recorded in both the Video and VR Modes is finalised, you cannot perform additional
recording.
• Once a DVD-RW recorded in Video Mode is finalised, it becomes DVD-Video.
• In both modes, playback can be performed before and after finalisation, but additional recording, deleting
and editing can not be performed after finalisation.
English _5
01587A-SH871M-XEU-ENG.indb 5
2008-04-17 오후 1:58:53
getting started
• If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful
when executing Format because all the recorded data may be lost.
• A DVD-RW blank disc is initialised to VR Mode when first initialised.
❖ DVD+RW Disc Playback and Recording
• With DVD+RW discs, there is no difference between DVD-Video format(Video mode) and DVD-Video
Recording format(VR mode).
• Finalising is generally unnecessary when using a DVD+RW disc.
❖ DVD-RAM Disc Playback and Recording
• Ensure that the recording mode is set to VR mode. Otherwise, this product will not be able to play the
recording.
• You cannot play a DVD-RAM in most DVD components due to compatibility issues.
• Only DVD-RAM standard Version 2.0. discs can be played in this unit.
• DVD-RAM recorded on this unit may not work with other DVD components. To determine compatibility with
these DVD-RAM discs, refer to the user’s manual for the player.
• For cartridge type DVD-RAM discs, remove the cartridge and use the disc only.
Disc Copy
Title Copy Specifications
Contents
HDD € DVD
DVD € HDD
Recorded Video Title
Supported
Supported
Copy Protected Title
Not supported
Not supported
Copy Once Title
Move
(Deletes the Title in the HDD after copying)
Not supported
Once “Copy Once programme” has been recorded on the DVD disc, this title cannot be copied to HDD
anymore.
But “Copy Once programme” has been recorded on the HDD, this title can be copied to DVD-RW (VR mode)
with CPRM or DVD-RAM.
Contents Copy Specifications
Contents
HDD ➔ DVD
DVD ➔ HDD
MP3
Supported
Supported
JPEG(photo)
Supported
Supported
DivX
Supported
Supported
CD-DA
Not supported
Supported
• Disc(CD-DA/CD-R/CD-RW/DVD-RAM, DVD±R(Finalise)/ DVD+RW/DVD-RW(Finalise)) ➔ HDD
• HDD ➔ DVD-R, DVD-RW(V)
• If the disc is finalised through Disc Manager, it can be compatible with PC as a disc with a UDF file system.
6_ getting started
01587A-SH871M-XEU-ENG.indb 6
2008-04-17 오후 1:58:54
COPY PROTECTION
• Many DVD discs are encoded with copy protection.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorised by Macrovision Corporation, is intended for home and other limited viewing uses only unless
otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
This HDD & DVD Recorder can allow you to protect the contents of your discs, as described below.
• Programme-protected : See page 83 “Locking (Protecting) a Title”
• Disc-protected : See page 98 “Disc Protection”
❋ DVD-RAM/±RW/±R discs that are incompatible with the DVD-VIDEO format cannot be played with this
product.
❋ For more information on DVD recording compatibility, consult your DVD-RAM/±RW/±R manufacturer.
❋ Use of poor quality DVD-RAM/±RW/±R discs may cause following unexpected problems including,
without limitation, recording failure, loss of recorded or edited materials or damage to the HDD & DVD
Recorder.
● GETTING STARTED
Protection
Disc Format
❖ Using MP3 disc
• CD-R/-RW, DVD-RAM/±RW/±R, HDD with MP3 files recorded with UDF, ISO9660 or JOLIET format can be
playbacked.
• Only MP3 files with the “.mp3” or “.MP3” extension can be played.
• For MP3 files recorded with a VBR(Variable Bit Rates), from 32 Kbps to 320 Kbps, the sound may cut in
out.
• Playable bit-rate range is from 56 Kbps to 320 Kbps.
• Each folder can have up to 500 items including files and sub folders.
❖ Using JPEG disc
•
•
•
•
CD-R/-RW, DVD-RAM/±RW/±R, HDD recorded with UDF, ISO9660 or JOLIET format can be playbacked.
Only JPEG files with the “.jpg” or “.JPG” extension can be displayed.
Each folder can have up to 500 items including files and sub folders.
MOTION JPEG and progressive JPEG are not supported.
❖ Using DivX disc
•
•
•
•
•
•
•
Disc : CD-R/-RW, DVD-RAM/±RW/±R, HDD
Video File with following extensions can be played. : .avi, .divx, .AVI, .DIVX
DivX Video (Codec) Format : DivX 3.11, DivX 4.x, DivX 5.x (without QPEL and GMC)
DivX Audio (Codec) Format : MP3, MPEG1 Audio Layer 2, LPCM, AC3, DTS
Supported subtitle file formats: .smi, .srt, .sub, .psb, .txt, .ass
Each folder can have up to 500 items including files and sub folders.
You cannot play back the disc that is larger than a 720 x 576 pixel resolution.
Do not use the following discs!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product.
[Note]
Disc types that can be played : CD/CD-R/-RW/MP3/JPEG/DVD-Video/DVD-RAM/±RW/±R.
For a DVD-RW/±R disc, which has been recorded in Video Mode on another component, it can play only
when finalised.
• Some commercial discs and DVD discs purchased outside your region may not be playable with this
product. When these discs are played, either “No disc.” or “Please check the regional code of the disc.” will
be displayed.
• If your DVD-RAM/±RW/±R discs is an illegal copy or is not in DVD video format, it may also not be playable.
❖ Disc compatibility
• Not all brands of discs will be compatible with this unit.
English _7
01587A-SH871M-XEU-ENG.indb 7
2008-04-17 오후 1:58:55
getting started
GETTING STARTED
2
CONNECTING & SETTING UP
20
2
3
10
11
12
14
16
19
Warning
Precaution
General Features
Before reading the user’s manual
How to use the HDD & DVD Recorder
Unpacking
Description
Tour of the Remote Control
20
21
22
27
29
Connecting the HDD & DVD Recorder
Additional connections
Other Types of connections with the Video
Output Cable
Other Types of connections with the Audio
Output Cable
Connecting HDMI/DVI to a TV
Connecting to AV 3 IN, DV input jack
31
31
33
34
37
39
39
41
43
43
44
On-Screen Menu Navigation
Plug & PLAY Setup
Clock Set
Channel Set
Setting up the System Options
Setting up the Language Options
Setting up the Audio Options
Setting up the Video Options
component output (progressive scan)
Setting up the Parental Lock
setting up the recording options
47
48
Basic Functions
Guide
24
SYSTEM SETUP
31
DTV FUNCTIONS
47
8_ getting started
01587A-SH871M-XEU-ENG.indb 8
2008-04-17 오후 1:58:57
PLAYBACK
50
67
EDITING
82
REFERENCE
102
104
APPENDIX
55
55
56
57
57
58
63
63
65
Region code (DVD-Video only)
Logos of Discs that can be played
Disc types that can be played
Playing a Disc
Using the Disc Menu & Title Menu
Using the playback related buttons
Using the INFO button
Selecting the Subtitle Language
Selecting the Soundtracks & Audio
Channels
Changing the Camera Angle
Repeat Play
Zooming-In
Using Markers
Using the Bookmarks
Playing an Audio CD/MP3
Music/Photo Simultaneous Playback
Viewing a Picture
Playing a DivX
67
68
69
70
71
72
73
73
74
76
79
80
80
Recordable Discs
Recording Formats
Recording Mode
Unrecordable pictures
Recording immediately
Copying from a Camcorder
Making a One Touch Recording (OTR)
Simultaneous Recording and Playback
Time Shift function as a live signal
Making a Timer Recording
Using the Video Plus+ Feature
Video Plus+ Extended
Go To Recorded List
82
86
86
87
88
93
94
97
97
Basic Editing (Title List)
Using the Sort function (Title List)
Navigation Menu
Select Contents
Advanced Editing (Playlist)
Copying from HDD to DVD or Vice-versa
Copying MP3, JPEG or DivX
Changing the name of Music/Photo/DivX file
Disc Manager
● GETTING STARTED
RECORDING
50
50
50
52
52
53
54
54
55
102 Troubleshooting
104 Specifications
105 Warranty
English _9
01587A-SH871M-XEU-ENG.indb 9
2008-04-17 오후 1:58:57
getting started
GENERAL FEATURES
This unit allows you to record and playback high quality digital video on DVD-RAM/±RW/±R discs or on the HDD.
You can also edit digital images on DVD-RAM/±RW discs or HDD.
HDD Recording
• DVD-SH871M
You can record up to Approx. 264 hours of video (in EP 8 Hr mode) on the internal 160 GB (gigabyte) hard
disk (HDD).
With both recordable DVD and a high-capacity HDD in the same recorder, you have the flexibility to keep
recordings on the HDD for quick access anytime, or record to DVD for archiving or playing on other DVD players.
Copy between HDD and DVD
You can copy recordings from the HDD to recordable DVD, or from recordable DVD to the HDD.
You can only copy in the same record mode as source title.
Simultaneous Recording and Playback
Playback and recording for both the DVD and the built-in hard disk drive (HDD) are completely independent.
For example you can record a broadcast programme to either a recordable DVD or the HDD, while watching
another recording you already made on the same DVD or on the HDD.
Automated Quality Adjustment for Timer Recording
If FR mode is selected, the video quality is adjusted automatically so that all video for the scheduled time can
be recorded onto the free disc space. (See pages 76~77)
Copying data from a digital camcorder using a DV input jack
Record DV Device video onto HDD and DVD-RAM/±RW/±R discs using the DV input jack
(IEEE 1394-4pin/4pin). (See page 72)
High quality progressive scan
Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC and 2D Y/C
Separating Circuitry provides the highest image playback and recording quality. (See page 45)
DivX Certification
DivX, DivX Certified, and associated logos are trademarks of DivX Networks, Inc and are used under licence.
• Official DivX® Certified product
• Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media files
HDMI (High Definition Multimedia Interface)
HDMI reduces picture noise by allowing a pure digital video/audio signal path from the
HDD & DVD Recorder to your TV.
This HDD & DVD Recorder supports 576p, 720p and 1080i, 1080p.
Anynet+(HDMI CEC)
Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote
control, by connecting the HDD & DVD Recorder to a SAMSUNG TV using an HDMI Cable.
(This is only available with SAMSUNG TVs that support Anynet+.)
n
EZ Record Mode
This function enables you to initialise and Finalise a disc automatically. (See page 47)
EPG functions
EPG is an Advanced Electronic Programme Guide.
With a Remote Control Unit, you can operate full function.
It has a Auto and Manual Scan facility and Channel Organizing (programmable) facility.
10_ getting started
01587A-SH871M-XEU-ENG.indb 10
2008-04-17 오후 1:58:58
BEFORE READING THE USER’S MANUAL
Make sure to check the following terms before reading the user manual.
Icons that will be used in manual
Icon
G
A
D
J
M
N
Definition
HDD
This involves a function available on the HDD.
DVD
This involves a function available on DVD or DVD±R/-RW(V) discs that have
been finalised.
RAM
This involves a function available on DVD-RAM.
-RW
This involves a function available on DVD-RW.
-R
+RW
+R
This involves a function available on DVD-R.
This involves a function available on DVD+RW.
This involves a function available on DVD+R.
CD-DA
This involves a function available on a data CD (CD-R or CD-RW).
JPEG
This involves a function available on CD-R/-RW, DVD±R/±RW/-RAM discs
or HDD.
MP3
This involves a function available on CD-R/-RW, DVD±R/±RW/-RAM discs
or HDD.
DivX
This involves a function available on CD-R/-RW, DVD±R/±RW/-RAM discs
or HDD.
Caution
This involves a case where a function does not operate or settings may be
cancelled.
NOTE
One-Touch
button
● GETTING STARTED
S
Z
X
C
V
K
L
Term
This involves tips or instructions on the page that help each function
operate.
A function that can be operated by using only one button.
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before using this product. (See pages 2~9)
2) If a problem occurs, check the Troubleshooting. (See pages 102~103)
Copyright
©2008 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
English _11
01587A-SH871M-XEU-ENG.indb 11
2008-04-17 오후 1:58:59
getting started
HOW TO USE THE HDD & DVD RECORDER
Step 1 : Select the disc type or HDD
Please check available disc type before recording.
If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a
rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a
non-rewritable DVD±R. You can record files directly to the built-in HDD or edit a recorded file.
Step 2 : Format the disc to start recording
Unlike a VCR, the HDD & DVD Recorder starts formatting when an unused disc is inserted. This is required
for the preparation of recording on a disc.
Using the HDD
Formatting unnecessary.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video Recording format (VR mode). You can edit recorded images
and create a playlist in a specific sequence according to your requirements.
Using a DVD-RW
This type of disc can be formatted in either DVD-Video format (V mode) or DVD-Video Recording format (VR
mode). For an unused disc, a message that asks whether to initialise a disc or not. If you select “DVD-VR” or
“DVD-V”, initialising will be started. You can play a Video mode disc on various DVD components. A VR mode
disc allows more varied editing.
Using a DVD-R
Formatting disc is unnecessary and only V Mode Recording is supported. You can play these types of discs
on various DVD components only when they have been finalised.
Using a DVD+RW
For an unused DVD+RW disc, a message that asks whether to format a disc or not. If you select “DVD+RW”,
formatting will be started.
Using a DVD+R
This type of disc will be formatted automatically.
Step 3 : Recording
There are two different recording methods, Direct Recording and Timer Recording. Timer recording is
classified as follows:
Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP
(extended mode) according to the recording mode. When recording is set in the FR mode, the best quality
picture is recorded with regards to the remaining time on the disc.
12_ getting started
01587A-SH871M-XEU-ENG.indb 12
2008-04-17 오후 1:59:00
Step 4 : Playing
You can select the title you want to play in a displayed menu and then immediately start playback.
A DVD consists of sections, called titles, and sub- sections, called chapters.
Step 5 : Editing a recorded disc
Editing on discs is easier than conventional video tapes. The HDD & DVD Recorder supports many different
edit functions, possible only with DVDs and HDD.
Creating a playlist (DVD-RAM/-RW in VR mode, HDD)
With this HDD & DVD Recorder, you can create a new playlist on a disc and edit it without the original, preexisting recording.
Step 6 : Finalising & Playing on other DVD components
To play your DVD on other DVD components, finalising may be necessary. First, finish all editing and recording
operations, then finalise the disc.
● GETTING STARTED
With a simple and easy edit menu, you can operate various edit functions, such as delete, copy, rename, lock,
etc., on a recorded title.
When using a DVD-RW disc in VR Mode
DVD discs recorded in VR mode can only be played back in DVD recorders, not players.
When using a DVD-RW disc in Video Mode
The disc should be finalised first to enable playback on anything other than this HDD & DVD Recorder. No
more editing or recording can be made on the disc once it has been finalised.
To enable recording on the disc again, the disc must be unfinalised.
When using a DVD±R disc
You should finalise the disc to play it on a component other than this HDD & DVD Recorder. You cannot edit
or record on the disc once it has been finalised.
M
 You can finalise the disc automatically using EZ Record function. (See page 45)
English _13
01587A-SH871M-XEU-ENG.indb 13
2008-04-17 오후 1:59:01
getting started
UNPACKING
Accessories
Check for the supplied accessories below.
Video/Audio Cable
RF Cable for TV
Remote Control
Batteries for Remote Control (AAA Size)
Instruction Manual
Quick Guide
Preparing the Remote Control
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote control.
• Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly.
• Replace the battery cover.
If the remote does not operate properly :
•
•
•
•
Check the polarity +/– of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local environmental regulations. Do not put them in the household
trash.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV STANDBY/ON button and enter the two-figure code corresponding to the brand of
your television, by pressing the appropriate number buttons.
14_ getting started
01587A-SH871M-XEU-ENG.indb 14
2008-04-17 오후 1:59:02
• Controllable TV Codes
BUTTON
BRAND
BUTTON
01, 02, 03, 04, 05, 06, 07, 08, 09
NOBLEX
66
AIWA
82
NOKIA
74
ANAM
10, 11, 12, 13, 14, 15, 16, 17, 18
NORDMENDE
72, 73, 75
BANG & OLUFSEN
57
PANASONIC
53, 54, 74, 75
BLAUPUNKT
71
PHILIPS
06, 55, 56, 57
BRANDT
73
PHONOLA
06, 56, 57
BRIONVEGA
57
PIONEER
58, 59, 73, 74
06, 56
CGE
52
RADIOLA
CONTINENTAL EDISON
75
RADIOMARELLI
57
DAEWOO
19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
RCA
45, 46
EMERSON
64
REX
74
FERGUSON
73
SABA
57, 72, 73, 74, 75
FINLUX
06, 49, 57
SALORA
74
FORMENTI
57
SANYO
41, 42, 43, 44, 48
06
FUJITSU
84
SCHNEIDER
GRADIENTE
70
SELECO
74
GRUNDIG
49, 52, 71
SHARP
36, 37, 38, 39, 48
71
HITACHI
60, 72, 73, 75
SIEMENS
IMPERIAL
52
SINGER
57
JVC
61, 79
SINUDYNE
57
35, 48
LG
06, 19, 20, 21, 22, 78
SONY
LOEWE
06, 69
TELEAVA
73
LOEWE OPTA
06, 57
TELEFUNKEN
67, 73, 75, 76
72, 73, 75
MAGNAVOX
40
THOMSON
METZ
57
THOMSON ASIA
80, 81
MITSUBISHI
06, 48, 62, 65
TOSHIBA
47, 48, 49, 50, 51, 52
MIVAR
52, 77
WEGA
57
NEC
83
YOKO
06
NEWSAN
68
ZENITH
63
● GETTING STARTED
BRAND
SAMSUNG
Result : If your television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.
M
 If several codes are indicated for your television brand, try each one in turn until you find one that works.
 If you replace the remote control’s batteries, you must set the brand code again.
Then you can control the television using the following buttons after pressing the TV button.
Button
TV STANDBY/ON
INPUT SEL.
TV VOL (+ -)
PROG (,.)
TV MUTE
Number
M
Function
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
Used to input number directly.
 The functions listed above does not necessarily work on all televisions. If you encounter problems, operate the
television directly.
English _15
01587A-SH871M-XEU-ENG.indb 15
2008-04-17 오후 1:59:04
getting started
DESCRIPTION
Front Panel
OPEN/CLOSE button
Opens and closes the disc tray.
DISPLAY
Displays the playing status, time, etc.
SEARCH/SKIP buttons
Goes to the next title/chapter/track or goes back to the previous title/chapter/track.
( Playback mode)
Select TV preset channels. (Stop mode)
PLAY/PAUSE button
Plays a disc or pauses playback.
STOP button
Stops disc playback.
REC button
Starts recording.
HDD/DVD button
Selects HDD/DVD mode.
DISC TRAY
Opens to accept a disc.
DV-INPUT
Connects to external digital equipment with a DV jack. (such as a camcorder)
10
AV 3 INPUT
Connects to external equipment.
11
STANDBY/ON button
Turns the HDD & DVD Recorder on and off .
16_ getting started
01587A-SH871M-XEU-ENG.indb 16
2008-04-17 오후 1:59:05
Rear Panel
● GETTING STARTED
Fan
The fan always revolves when the power
is on. Ensure a minimum of 10 cm clear
space on all sides of the fan when
installing the product.
10
In from aerial connector
Connects RF cable from antenna.
AV2(EXT) INPUT SCART
Connector
Connects to equipment having SCART output jack.
HDMI OUT
Connects to equipment having HDMI input.
COMPONENT VIDEO
OUT
Connects to equipment having Component video input.
DIGITAL AUDIO
OUT(OPTICAL)
Connects to an amplifier having a digital optical audio input jack.
DIGITAL AUDIO
OUT(COAXIAL)
Connects to an amplifier having a digital coaxial audio input jack.
VIDEO OUT
Connects the input of external equipment using a Video cable.
AUDIO OUT
Connects to the audio input of external equipment using audio cables.
AV1(TV) OUTPUT
SCART Connector
Connects to equipment having SCART input jack.
Out to TV connector
Connects RF cable to TV antenna input.
English _17
01587A-SH871M-XEU-ENG.indb 17
2008-04-17 오후 1:59:11
getting started
Front Panel Display
Playback-related,
Open/Close indicator
Lights when playback-related and open/close buttons are selected.
In Disc Indicator
Lights status icon.
DVD VIEW Indicator
Lights when DVD mode is selected.
HDD VIEW Indicator
Lights when HDD mode is selected.
Disc Media Indicator
Lights when a DVD±RW/±R disc is loaded.
TIMER Indicator
Lights to indicate the timer record mode.
HDMI Indicator
Lights to indicate when HDMI is connected.
REC Indicator
Lights in the record mode.
STATUS Indicator
Playing time/clock/current status indicator.
18_ getting started
01587A-SH871M-XEU-ENG.indb 18
2008-04-17 오후 1:59:13
TOUR OF THE REMOTE CONTROL
Your HDD & DVD RECORDER remote control will work with Samsung televisions and compatible brands.
Installing batteries in the Remote Control
Lift the cover at the back of the
remote control upward as shown.
2.
INPUT SEL. button
Select input signal in external input mode (PROG, AV1, AV2,
AV3 or DV input).
Install two AAA size batteries.
Make sure to match the “+” and “–”
ends of the batteries with the diagram
inside the compartment.
3.
Replace the cover.
Assuming typical TV usage, the
batteries last for about one year.
SELECT
● GETTING STARTED
1.
(TV, DVD, HDD)
DTV/ANALOG button
Select Digital/Analogue broadcasting.
STANDBY/ON button
Press to turn the HDD & DVD RECORDER On/Off.
NUMBER buttons
OPEN/CLOSE button
To open and close the disc tray.
TV STANDBY/ON button
Press to turn the TV On/Off.
Used to input number directly.
TV/DVD button
Select TV or DVD mode
COPY button
Used to copy contents or title.
REPEAT button
Allows you to repeat a title, chapter, track or disc.
Playback-related Buttons
Forward/Rewind, Search, Skip, Stop, Play/Still.
TV MUTE button
In TV mode, this operates as sound mute.
TV VOL button
TV volume adjustment.
PROG button
Use this to select a TV programme.
MENU button
Brings up the HDD & DVD Recorder’s setup menu.
RETURN button
Press to return to the previous menu.
EXIT button
Press to exit the setup screen.
TITLE LIST/DISC MENU button
Use this to enter the View Recording list/disc menu.
A, B, C, D button
Allows access to various function of HDD & DVD RECORDER.
(INFO) button
Allows access to various function of HDD & DVD RECORDER.
when you use DTV. Allows access to common functions of the
HDD & DVD Recorder. (pages 54~56)
GUIDE button
Press this to switch programme guide.
TEXT button
When you use DTV, press this button to select the digital text service.
TV/RADIO button
In DTV mode, press this to switch TV or Radio mode
REC button
Use to make a recording on HDD/DVD-RAM/±RW/±R discs.
OK/DIRECTION buttons
(▲▼◄ ► buttons)
Used to select or move up/down, left/ right when setting the
menu function.
PLAY LIST/TITLE MENU button
Use this to return to the Title menu, or to view the recorded
files list.
SUBTITLE button
Press this to switch DVD’s subtitle language. When you use
DTV, press this button to select the subtitle.
MARKER button
Use this to bookmark a position while playing a disc.
TIMER button
Press to directly enter the Timer Recording Mode menu.
FAV LIST button
When you use DTV, press this button to switch between favorit list.
REC PAUSE/TIME SHIFT button
Use this to pause during recording. In HDD mode, use this to
operate Time shift function.
AUDIO button
Press this to switch DVD's audio language.
When you use DTV, press this button to select the audio.
REC MODE button
Use this to set the desired recording time and picture quality.
(XP/SP/LP/EP).
English _19
01587A-SH871M-XEU-ENG.indb 19
2008-04-17 오후 1:59:15
connecting & setting up
CONNECTING THE HDD & DVD RECORDER
This section involves various methods of connecting the HDD & DVD Recorder to other external components and
required initial setting modes.
You can connect your HDD & DVD Recorder to the television using the SCART cable if the appropriate input
is available on the television.
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD Recorder.
3. Plug the other end into the appropriate connector on the television.
4. Plug in the HDD & DVD Recorder and TV
5. Turn on the HDD & DVD Recorder and TV.
6. Press the INPUT SEL. button on your TV remote control until the Video signal from the HDD & DVD
Recorder appears on the TV screen.
To RF IN
To TV
RF Cable
To ANT INPUT
M
 The RF cable connection of this product sends only TV signals. You must connect a SCART cable or Audio/Video
cables to watch output from your HDD & DVD Recorder.
20_ connecting & setting up
01587A-SH871M-XEU-ENG.indb 20
2008-04-17 오후 1:59:18
ADDITIONAL CONNECTIONS
You can connect your HDD & DVD Recorder to a External device (VCR/Satellite receiver).
External device (VCR/Satellite receiver)
● CONNECTING & SETTING UP
- DVD mode
1. Connect the AV2 connector of HDD & DVD Recorder and External device (VCR/Satellite receiver) using a
SCART cable.
2. Connect the AV1 connector to the SCART AV connector on the TV.
3. Turn on the HDD & DVD Recorder, External device (VCR/Satellite receiver) and TV.
4. Set Input mode on AV2.
- TV mode
1. Press the TV/DVD button on remote control, then “TV” appear on Front display.
(or turn off HDD & DVD Recorder.)
2. You can watch programmes from a satellite or digital tuner connected to this HDD & DVD Recorder, even
when the HDD & DVD Recorder is turned off.
English _21
01587A-SH871M-XEU-ENG.indb 21
2008-04-17 오후 1:59:20
connecting & setting up
OTHER TYPES OF CONNECTIONS WITH THE VIDEO OUTPUT CABLE
There are several ways to output video signal not using scart cables. Select one of the following video connections
that best suits you below.
• Case 1 : Connecting to a Video (Composite) output jack
• Case 2 : Component Video output jacks
Component video and Progressive Output Modes
• Component video output is available only if your TV supports Component video input.
If Component video output does not work, check the TV connections and the TV input selection settings.
• Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV,
resulting in a more stable, flicker-free, clear image than interlaced video. This is only available with TVs that
support progressive scan.
• Progressive Scan Output (576P)
Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture, in case of 576 progressive scan picture problems, It is
recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding our TV set compatibility with this model 576P HDD & DVD Recorder, please contact our customer
service centre.
Case 1 : Connecting to a Video (Composite) output jack
You will enjoy regular quality images.
1. Connect a video (Yellow) cable between the VIDEO (yellow) OUT jack on HDD & DVD Recorder and
VIDEO (yellow) INPUT jack on your TV (or AV amplifier).
2. Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD Recorder and
AUDIO IN jacks on TV (or AV amplifier). (See pages 24~26)
Video/Audio Cable
Yellow
Red
White
22_ connecting & setting up
01587A-SH871M-XEU-ENG.indb 22
2008-04-17 오후 1:59:21
Case 2 : Component Video output jacks
You will enjoy high quality and accurate colour reproduction images.
1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y, PB, PR) jacks on HDD
& DVD Recorder and COMPONENT IN(Y, PB, PR) jacks on your TV.
2. Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD Recorder and
AUDIO IN jacks on TV (or AV amplifier).
(See pages 24~26).
3. After connecting, refer to the page 42.
● CONNECTING & SETTING UP
Green
M
Blue
Red
 Make sure that the colour coded connections match. The Y, PB, PR component output jacks of your HDD & DVD
Recorder must be connected to the exact corresponding component input jacks on your TV.
 Progressive setting is only available when the Video Out is set to Component.
(See page 43)
English _23
01587A-SH871M-XEU-ENG.indb 23
2008-04-17 오후 1:59:25
connecting & setting up
OTHER TYPES OF CONNECTIONS WITH THE AUDIO OUTPUT CABLE
There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you
below.
• Case 1 : Connecting to your TV
• Case 2 : Connecting to a stereo amplifier with AV output jacks
• Case 3 : Connecting to an AV amplifier with a digital output jack
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending.
DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights Reserved.
Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Yellow
Red
White
24_ connecting & setting up
01587A-SH871M-XEU-ENG.indb 24
2008-04-17 오후 1:59:28
Case 2 : Connecting to a stereo amplifier with AV output jacks
If your stereo amplifier only has AUDIO INPUT jacks (L and R), use the AUDIO OUT jacks
● CONNECTING & SETTING UP
Red
White
Front(L)
speaker
Front(R)
speaker
English _25
01587A-SH871M-XEU-ENG.indb 25
2008-04-17 오후 1:59:31
connecting & setting up
Case 3 : Connecting to an AV amplifier with a digital output jack
If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection.
To enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings. According to your
amplifier, connect to an optical cable or a coaxial cable. (See pages 39~40)
or
Rear(L)
Rear(R)
Front(L)
Front(R)
Subwoofer
Centre
26_ connecting & setting up
01587A-SH871M-XEU-ENG.indb 26
2008-04-17 오후 1:59:34
CONNECTING HDMI/DVI TO A TV
If your TV has a HDMI/DVI input, connect HDMI/DVI Adapter cable to a TV. You will enjoy high quality images.
• Case 1 : Connecting to a TV with HDMI Jack
• Case 2 : Connecting to a TV with DVI Jack
Case 1 : Connecting to a TV with HDMI Jack
M
● CONNECTING & SETTING UP
• Using the HDMI cable (not supplied) connect the HDMI OUT jack on the rear of the HDD & DVD Recorder
to the HDMI IN jack of your TV.
• Press the input selector on your TV remote control until the HDMI signal from the HDD & DVD Recorder
appears on your TV screen.
 If the HDD & DVD Recorder is connected to your TV in HDMI 1080p output mode, you must use High
speed(category2) HDMI cable.
English _27
01587A-SH871M-XEU-ENG.indb 27
2008-04-17 오후 1:59:35
connecting & setting up
Case 2 : Connecting to a TV with DVI Jack
• Using the DVI Adapter cable (not supplied), connect the HDMI OUT jack on the rear of the HDD & DVD
Recorder to the DVI IN jack of your TV.
• Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the HDD & DVD
Recorder to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD Recorder and TV.
• Press the input selector on your TV remote control until the DVI signal from the HDD & DVD Recorder
appears on your TV screen.
Red
J
White
 To use HDMI cable (not supplied), make the Audio/Video connection before plugging in the power cord or after
finishing the “Plug & Play Setup.” Do not connect the HDMI cable while the “Plug & Play Setup” is progressing.
 Progressive scan automatically activates when HDMI is connected.
 If TV/HDMI Receiver does not support DTS, Audio output is not available when you play a disc in DTS format.
 You can switch from the HDMI output to other output only in stop mode.
 If you use an HDMI cable to connect a Samsung TV to the HDD & DVD Recorder, you can operate the recorder using
the TV remote control.
(This is only available with SAMSUNG TVs that support Anynet+(HDMI CEC).) (See pages 37~38)
 Please check the n logo (If your TV has an n logo, then it supports Anynet+ function.)
M
 HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Since
HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that HDMI
supports multi-channel audio. Using HDMI, the HDD & DVD Recorder transmits a digital video and audio signal and
displays a vivid picture on a TV having an HDMI input jack.
28_ connecting & setting up
01587A-SH871M-XEU-ENG.indb 28
2008-04-17 오후 1:59:37
 HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
- Though the HDD & DVD Recorder uses a HDMI cable (not supplied), the HDD & DVD Recorder outputs only a pure
digital signal to the TV.
- If TV does not support HDCP (High -bandwidth Digital Content Protection), snow noise appears on the screen.
 Why does Samsung use HDMI?
 What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via HDMI from
being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV,
projector. etc). Content is encrypted at the source device to prevent unauthorised copies from being made.
CONNECTING TO AV 3 IN, DV INPUT JACK
This allows you to connect your HDD & DVD Recorder to other external devices and view or record their outputs.
• Case 1 : Connecting a VCR, Set-Top Box(STB), DVD player or Camcorder to the AV 3 IN jacks
• Case 2 : Connecting a DV Device to the DV IN jack
● CONNECTING & SETTING UP
Analogue TVs require an analogue video/audio signal. However, when playing a DVD, the data transmitted to a TV is
digital. Therefore either a digital-to-analogue converter (in the HDD & DVD Recorder) or an analogue-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss.
HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the HDD & DVD
Recorder to your TV.
Case 1 : Connecting a VCR, Set-Top Box(STB), DVD player or
Camcorder to the AV 3 IN jacks
Connecting a VCR or external device to AV 3 IN jacks of the HDD & DVD Recorder. You can record from
connected equipment (VCR, STB, DVD player or Camcorder).
Yellow
M
Red
White
 AV 3 in selection will be automatically done.
If the input is not selected automatically, use INPUT SEL. button to select proper input.
 Copy protected content cannot be recorded.
English _29
01587A-SH871M-XEU-ENG.indb 29
2008-04-17 오후 1:59:41
connecting & setting up
Case 2 : Connecting a Camcorder to the DV IN jack
If your digital camcorder has a DV output jack, connect it to the DV input jack of your HDD & DVD Recorder.
Camcorder
M
 If the input is not selected automatically, use INPUT SEL. button to select proper input.
30_ connecting & setting up
01587A-SH871M-XEU-ENG.indb 30
2008-04-17 오후 1:59:43
system setup
ON-SCREEN MENU NAVIGATION
1. ▲▼, ◄ ► buttons
Press these buttons on the remote control to move the selection
bar ▲▼, ◄ ► to cycle through the menu options.
2. OK button
Press this button on the remote control to confirm any new
settings.
3. RETURN button
Press this button on the remote control to return to the Previous
menu screen displayed or to exit the on-screen menu.
HDD & DVD RECORDER
Library
HDD
Library
Title
►
Guide
DivX
►
Music
►
Photo
►
Channel
Timer Record
● SYSTEM SETUP
The on-screen menus allow you to enable or disable various functions on your HDD & DVD Recorder.
Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on
screen menus.
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
4. EXIT button
Press this button to exit the on-screen menu.
PLUG & PLAY SETUP
Your HDD & DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and
clock will be stored in memory. The process takes a few minutes. Your HDD & DVD Recorder will then be ready for
use.
1. Connect the RF cable as indicated on page 20.
(Connecting Your HDD & DVD Recorder to the TV Using the RF Cable and scart cable.)
To use HDMI cable (not supplied), make the Audio/Video connection before plugging in the power cord or
after finishing the “Plug & Play Setup” Do not connect the HDMI cable while the “Plug & Play Setup” is
progressing.
2. Plug the HDD & DVD Recorder into the mains. “AUTO” in the front panel
display flickers.
3. Press the OK or ► button, then Country option display.
Press the ▲▼ buttons to select the desired country option, then press
the OK button.
4. Press the OK or ► button, then Language option display.
Press the ▲▼ buttons to select the desired language option,
then press the OK button.
5. Press the OK or ► button, then Time Zone option display.
Press the ◄ ► buttons to select the desired time zone option.
Press the ▲▼ buttons to select OK, then press the OK button.
Initial Installation
Country
: United
Kingdom
United
Kingdom
Language
France
: United
Kingdom
Austria
: GMT
- 12:00
Belgium
Time Zone
Denmark
: Off
Finland
Deutschland
Netherlands
OK
Daylight Saving Time
Initial Installation
Country
Time Zone
Language
◄
Time Zone
Daylight Saving Time
: United Kingdom
►
United Kingdom
GMT +:00:00
►
: GMT - 12:00
OK
: Off
►
►
►
OK
English _31
01587A-SH871M-XEU-ENG.indb 31
2008-04-17 오후 1:59:45
system setup
6. Press the OK or ► button, then Daylight Saving Time option
display.
Press the ▲▼ buttons to select On or Off, then press the OK
button.
7. Press the ▼ button to select OK, then press the OK button.
Digital auto scan will be started.
Initial Installation
Country
: United Kingdom
►
Language
: English
►
Time Zone
: GMT + 00:00
Off
: Off
On
►
Daylight Saving Time
8. After auto channel scan is completed, the message "Your digital
receiver found" will be displayed.
9. Press the OK button.
Analogue auto scan will be started.
10. After auto channel scan is completed, auto clock setting will be
started automatically in 10 seconds. If you want to start auto
clock setting immediately, press OK button.
11. Wait until current date and time are displayed automatically.
If you want to exit auto clock setting, press MENU button.
►
OK
Auto Scanning
Digital 594.000MHz, BW:8MHz, FFT:Auto
DTV
Radio
5
Your digital receiver found
BBC ONE
BBC TWO
BBC THREE
BBC NEWS 24
BBCi
CBBC Channel
DTV
Radio
5
5
5
OK
Progress
Signal status
eEXIT
M
 Now your HDD & DVD Recorder is ready for use. If you wish to
retune, you can by using the “Channel Set - Manual Setup” menu.
(See pages 34~35)
 Auto setup function can be performed by pressing STOP ( ) on the
unit continuously for 5 seconds or more during power off with no
disc inserted.
Auto Scanning
ATV
3
PR
CH
1
2
3
004
--072
Name
----------
Progress
12. Check the date and time.
• If it is Correct, press OK button then the date and time will be
saved. If you don’t press the OK button, the date and time will
be saved automatically after 5 seconds.
• If it is Incorrect, input correct Month, Day, Year, Hour or
Minute using ▲▼, ◄ ► buttons or number buttons. Press OK
button then the date and time will be saved. When you need to
change clock setting, you can set up it manually.
eEXIT
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
Clock Set
mo.
da.
yr.
JAN
01
2008
hr.
12
min. Auto
00
On
Tuesday
32_ system setup
01587A-SH871M-XEU-ENG.indb 32
2008-04-17 오후 1:59:47
CLOCK SET
1. With the unit in Stop mode, press the MENU button.
HDD & DVD RECORDER
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
3. Press the ▲▼ buttons to select Clock Set, then press the OK or
► button.
Setup
HDD
Library
Guide
Channel
System
►
Clock Set
►
Language
►
Audio
►
Timer Record
Video
Disc Manager
Parental Lock
Setup
►
Recording
►
sSELECT
rRETURN
eEXIT
Time Zone
To setup, follow steps 1~3.
4. Press the ▲▼ buttons to select Time Zone, then press the OK
or ► button.
Select the time zone of your area using the ◄ ► buttons, then
select OK using ▲▼ button.
HDD & DVD RECORDER
Clock Set
HDD
Library
Guide
Channel
Time Zone
Time Zone
Manual Clock Set
◄
GMT + 00:00
Daylight
Saving
►
● SYSTEM SETUP
m MOVE
►
1
►
►
►
OK
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
❖ GMT (Greenwich Mean Time) Table
Country
GMT
City
United Kingdom, Portugal
GMT+00:00
Dublin, Edinburgh, London, Lisbon, Casablanca
France, Austria, Belgium, Demark, Germany,
Netherlands, Italy, Norway, Spain, Sweden, Switzerland,
Hungary, Czech Republic
GMT+01:00
Berlin, Stockholm, Rome, Vienna, Paris, Madrid,
Prague, Warsaw, Brussels, Copenhagen, Oslo,
Bern, Budapest, Warsaw, Prague
Finland, Turkey, Greece, Eastern Europe
GMT+02:00
Athens, Helsinki, Istanbul, Cairo, Pretoria, Israel
Manual clock set
To setup, follow steps 1~3.
4. Press the ▲▼ buttons to select Manual Clock Set, then press
the OK or ► button.
Use the ▲▼◄ ► buttons to input Time, Date or Year.
Use number buttons to input clock data directly.
5. Press the OK button, then the date and time will be saved.
If you don’t press the OK button, it will not be saved.
HDD & DVD RECORDER
Clock Set
HDD
Library
Guide
Channel
Timer Record
mo.
da.
yr.
JAN
01
2008
hr. min. Auto
12
00
On
Tuesday
Disc Manager
Setup
< MOVE
M
sSELECT
rRETURN
eEXIT
 You must have the RF cable connected to set the Auto Clock. (See page 20)
 The DVD Recorder automatically sets the clock according to the time signal broadcast between the channels PR1 to
PR5. If there is no clock in the analogue broadcast, the clock will be searched automatically in the DVB-T. If you do
not need the Auto clock set function, select Off.
 If there is a difference between the time information of analogue and the one of digital, you may not be available to
view the contents of DVB-T normally.
English _33
01587A-SH871M-XEU-ENG.indb 33
2008-04-17 오후 1:59:49
system setup
Daylight Saving Time
To setup, follow steps 1~3 on page 33.
4. Press the ▲▼ buttons to select Daylight Saving Time, then
press OK or ► button.
HDD & DVD RECORDER
Clock Set
HDD
Library
5. Select the Off or On using the ▲▼ buttons, then press the OK or
► button.
Guide
Channel
Time Zone
►
Manual Clock Set
►
Daylight Saving Time Off
✔►
On
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
CHANNEL SET
This menu consist of 5 sub-menus (Digital Channel List, Digital Favorite Channel, Auto Setup, Digital Manual Setup,
Analogue Manual Setup).
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Channel, then press the OK or ► button.
Auto Setup
This function will automatically store any channels that can be found through the RF connection.
To setup, follow steps 1~2 on page 34.
3. Press the ▲▼ buttons to select Auto Setup, then press OK or
► button.
The message "Auto Setup will remove all channels. Press [OK] to
continue,[RETURN] to exit." will be displayed.
Auto Scanning
Country
Channel type
Scan Mode
Start frequency
End frequency
:
:
◄
◄
United Kingdom ►
All
►
:
All
4. Press the OK button, then press Press the ▲▼◄ ► buttons to
:
CH 21/474000kHz
:
CH 69/858000kHz
select desired options.
Start
Cancel
• Country : Press the ◄ ► buttons to select desired country.
• Channel type : Press the ◄ ► buttons to select Digital,
Analogue or All. (If you select Analogue, you can
not select the Scan Mode, Start frequency and (Channel Type : Digital)
End frequency.)
Auto Scanning
• Scan Mode : - Only Free : Receives signals except for
Digital 594.000MHz, BW:8MHz, FFT:Auto
the scrambled signal.
DTV
Radio
5
5
Your digital receiver found
BBC ONE
- All : Receives signals including the
DTV
Radio
5
5
BBC TWO
BBC THREE
scrambled signal.
OK
BBC NEWS 24
BBCi
• Start frequency/End frequency : It is changed automatically
CBBC Channel
Progress
when the country is selected.
Signal Status
5. Press the ▲▼ button to select Start, then press OK button.
eEXIT
Auto Scan will be started.
◄
►
◄
►
◄
►
(Channel Type : Analogue)
Auto Scanning
ATV
3
PR
CH
1
2
3
004
--072
Name
----------
Progress
eEXIT
M
 You can select RADIO mode by pressing the TV/RADIO button on the remote control.
This button is used to toggle between the TV and RADIO modes.
34_ system setup
01587A-SH871M-XEU-ENG.indb 34
2008-04-17 오후 1:59:53
Digital Manual Setup
To tune-in new channels, the HDD & DVD Recorder has been provided with the option Manual Scan where
the channel data can be entered by user.
To setup, follow steps 1~2 on page 34.
3. Press the ▲▼ buttons to select Digital Manual Setup, then
press OK or ► button.
Channel
HDD
Library
Guide
Channel
Timer Record
Digital Channel List
►
Digital Favorite Channel
►
Auto Setup
►
Digital Manual Setup
►
Analogue Manual Setup
►
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
Manual Scanning
Country
Channel type
Scan Mode
Channel Number
Frequency
Bandwidth
Signal status 50%
:
:
:
:
:
:
United Kingdom
Digital
All
◄
CH 5
◄
178750kHz
◄
8MHz
◄
Start
● SYSTEM SETUP
4. Select the Channel Number which you want to find using ◄ ►
buttons.
Select Frequency and input the Frequency of the channel you
want to find by pressing the number button.
Select Bandwidth which you want to find using ◄ ► buttons.
When the valid frequency is input, the bandwidth is selected
automatically. You can select the value of 6,7 or 8 MHz. After
select option. Press OK button to start the scanning process.
HDD & DVD RECORDER
►
►
►
►
Cancel
Analogue Manual Setup
To setup, follow steps 1~2 on page 34.
3. Press the ▲▼ buttons to select Analogue Manual Setup, then
press OK or ► button.
4. Press the ▲▼ buttons to select a PR(programme) you wish to
edit, delete, or swap, then press the COLOUR button.
Select Edit, Delete or Swap.
• Edit- RED(A) button : You can add or edit programme (PR)
information. After you have changed the PR information (CH,
Name, MFT), select Save, then press the OK button.
- CH : Tune the channel using ◄ ► buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can edit
name by using ▲▼◄ ► buttons.
- MFT (Manual Frequency Tunning) :
You can tune the channel frequency manually using ◄ ►
buttons.
• Delete GREEN(B) button : The selected programme will be
removed.
• Swap YELLOW(C) button : You can swap the channel
information of two programmes (PR). For example, if you wish
to swap PR2 and PR5, select swap at PR2, then press the OK
button at PR5.
HDD & DVD RECORDER
Channel
HDD
Library
Guide
Channel
Timer Record
Digital Channel List
►
Digital Favorite Channel
►
Auto Setup
►
Digital Manual Setup
►
Analogue Manual Setup
►
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
Manual Setup
PR
CH
Name
01
02
03
04
05
06
07
---------------
----------------------
A
Edit
B
Delete
C
Swap
Manual Setup
PR
CH
Name
MFT
01
◄
►
Save
m MOVE sSELECT
English _35
01587A-SH871M-XEU-ENG.indb 35
2008-04-17 오후 1:59:56
system setup
Digital Channel List
This function is possible in DVB-T mode only.
This function is used to edit the favorite channel list or delete the channel.
To setup, follow steps 1~2 on page 34.
3. Press the ▲▼ buttons to select Digital Channel List, then press
OK or ► button.
4. To edit the current channel in the Digital Channel List, press the
RED(A) button.
To delete a channel from the Digital Channel List, press the
YELLOW(C) button. Press the OK button to watch that channel.
M
DTV list
001 BBC ONE
002 BBC TWO
007 BBC THREE
030 CBBC Channel
040 BBC NEWS 24
051 BBCi
Remove
Edit FAV
r Return
#/$ Page
 Press OK button in the DVB-T view to display the Digital channel list.
 Press FAV LIST button 5 times in the DVB-T view to display the
channel List.
 You can select RADIO mode by pressing the TV/RADIO button on the
remote control.
This button is used to toggle between the TV and RADIO modes.
Radio list
001 BBC ONE
002 BBC TWO
007 BBC THREE
030 CBBC Channel
040 BBC NEWS 24
051 BBCi
Remove
Edit FAV
r Return
#/$ Page
Digital Favourite Channel
This function is possible in DVB-T mode only.
You can immediately register the present channel to the Digital Favorite Channel list.
To setup, follow steps 1~2 on page 34.
3. Press the ▲▼ buttons to select Digital Favorite Channel, then
press OK or ► button.
4. To add the current channel the Digital Favorite channels, press the
YELLOW(C) button.
To delete a favorite channel from the Digital Favorite channel list,
press the RED(A) button.
Press the OK button to watch that channel.
M
Favorite DTV 1
001 BBC THREE
002 BBC NEWS 24
Remove
Add Current
#/$ Page
r Return
 You can also operate this function by pressing the FAV LIST button on the remote control.
 You can make up to 8 digital favourite lists(4 TV favourite lists and 4 radio favourite list)
36_ system setup
01587A-SH871M-XEU-ENG.indb 36
2008-04-17 오후 1:59:59
SETTING UP THE SYSTEM OPTIONS
This function allows you to setup the system setting.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
4. Press the ▲▼ buttons to select the desired system option, then
press the OK or ► button.
5. Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
System
HDD
Library
Guide
Channel
Auto Power Off
: Off
►
Anynet+ (HDMI CEC) : On
►
DVB-T Auto Subtitle
►
: On
DivX(R) Registration
►
Timer Record
● SYSTEM SETUP
3. Press the ▲▼ buttons to select System, then press the OK or ►
button.
HDD & DVD RECORDER
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
Auto Power Off Setting
This feature automatically turns off your HDD & DVD Recorder, if you do not press any button for the selected
time.
1. Press the ▲▼ buttons to select Auto Power Off, then press the
OK or ► button.
HDD & DVD RECORDER
System
HDD
Library
Auto Power Off
: Off
Off
✔
2. Press the ▲▼ buttons to select the desired item, then press the
Anynet+ (HDMI CEC) 2:Hours
On
Guide
OK or ► button.
DVB-T Auto Subtitle 6:Hours
On
Channel
DivX(R) Registration
• Off : Auto power off is disabled.
Timer Record
Disc Manager
• 2 Hours : HDD & DVD Recorder will automatically turn off after
Setup
2 hours since the last button was pressed.
m MOVE
sSELECT
rRETURN
eEXIT
• 6 Hours : HDD & DVD Recorder will automatically turn off after
6 hours since the last button was pressed.
• If the turn off time set with the Auto Power off function is reached during playback or recording, the
device will operate until the playback or recording is finished.
►
►
►
►
M
 If you off and on the HDD & DVD Recorder, the option will be returned to default.
Anynet+ (HDMI CEC)
Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by
connecting the HDD & DVD Recorder to a SAMSUNG TV using an HDMI Cable. (See pages 27~28)
(This is only available with SAMSUNG TVs that support Anynet+.)
1. Press the ▲▼ buttons to select Anynet+ (HDMI CEC), then
press the OK or ► button.
Anynet+ (HDMI CEC) items will be displayed.
2. Press the ▲▼ buttons to select On, then press the OK or ►
button.
HDD & DVD RECORDER
System
HDD
Library
Guide
Channel
Auto Power Off
: Off
►
Anynet+ (HDMI CEC) Off
: On
►
DVB-T Auto Subtitle On
: On
✔►
DivX(R) Registration
►
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
English _37
01587A-SH871M-XEU-ENG.indb 37
2008-04-17 오후 2:00:01
system setup
For using Anynet+ (HDMI CEC)
1. Connect the HDD & DVD Recorder to a Samsung TV with an HDMI cable. (See pages 27~28)
2. Set the Anynet+ (HDMI CEC) to “On” on your HDD & DVD Recorder. (See page 37)
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
• You can operate the HDD & DVD Recorder by using TV remote control.
,
(TV buttons that can be used to control the HDD & DVD Recorder :
, ~ , REC and colour buttons.)
• When you press Anynet+ button on the TV’s remote control,
the OSD to the left will appear.
- Select Device : Use this option to select device.
- Record : Use this option to start recording or stop
recording.
- Menu on Device : Same as MENU button (
) on the
HDD & DVD Recorder remote control.
) on the
- Device Operation : Same as INFO button (
HDD & DVD Recorder remote control.
M
,
,
,
,
,
,
,
< TV Menu >
DVDR
View TV
Z
Select Device
Z
Record
Z
Menu on Device
Z
Device Operation
Z
Receiver : Off
Z
Setup
Z
> Move
eExit
sEnter
 By pressing the Power On button of the recorder while watching TV, the TV screen will change to the play screen.
 If you power on a HDD & DVD Recorder when the TV power is off, the TV will power On.
 If you turn the TV off, the HDD & DVD Recorder will power off automatically. (When the HDD & DVD Recorder is
recording, it can’t be powered off.)
 If you change the HDMI to other sources (Composite, Component, RF... etc) in TV while playing the DVD disc, the
HDD & DVD Recorder will stop playing. But the HDD & DVD Recorder may keep the DVD disc Recording.
DVB-T Auto Subtitle
• On : The subtitle is shown automatically when watching the DVB-T.
• Off : The function is cancelled.
HDD & DVD RECORDER
Library
Guide
M
 It is available when watching a programme that has subtitles.
System
HDD
Channel
Auto Power Off
: Off
►
Anynet+ (HDMI CEC) : On
►
DVB-T Auto Subtitle Off
: On
DivX(R) Registration On
Timer Record
►
✔►
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
DivX(R) Registration
Please use the Registration code to register this HDD & DVD
Recorder with the DivX(R) Video On Demand format. For more
information, visit www.divx.com/vod
HDD & DVD RECORDER
System
HDD
Library
Auto Power Off
: Off
►
Video On(HDMI
Demand
CEC) : On
GuideDivX(R)Anynet+
DVB-T Auto Subtitle : On
Channel
Your registration code is XXXXXXXX
Registration
To DivX(R)
learn more
visit www.divx.com/vod
Timer Record
►
►
►
Ok
Disc Manager
Setup
sSELECT
rRETURN
eEXIT
38_ system setup
01587A-SH871M-XEU-ENG.indb 38
2008-04-17 오후 2:00:05
SETTING UP THE LANGUAGE OPTIONS
If you set the language options, in advance, they will come up automatically every time you watch a movie.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
Language
HDD
Library
: Original
►
DVB-T Audio
: English
►
DVD Subtitle
: Automatic
►
DVB-T Subtitle
: English
►
Timer Record
Disc Menu
: English
►
Disc Manager
Menu
: English
►
Guide
Channel
DVD Audio
Setup
4. Press the ▲▼ buttons to select the desired language option,
m MOVE
sSELECT
press the OK or ► button.
• DVD Audio : For the disc audio language.
• DVB-T Audio : For the audio the current broadcasting Programme provides.
• DVD Subtitle : For the disc subtitles.
• DVB-T Subtitle : For the subtitles the current broadcasting Programme provides.
• Disc Menu : For the disc menu contained on the disc
• Menu : For the on-screen menu of your HDD & DVD Recorder.
rRETURN
eEXIT
● SYSTEM SETUP
3. Press the ▲▼ buttons to select Language, then press the OK or
► button.
Language setup menu will be displayed.
HDD & DVD RECORDER
5. Press the ▲▼ buttons to select the desired language, then press the OK or ► button.
M
 If the selected language is not recorded on the disc, the original pre-recorded language is selected.
 The selected language will only appear if it is supported on the disc and DVB-T.
 During the playback, press the SUBTITLE button to select DVD subtitle. Because the default of DVD subtitle is off,
press the ▲▼ button to select the desired subtitle.
SETTING UP THE AUDIO OPTIONS
You can connect the HDD & DVD Recorder to an external amp or Home theatre.
Audio options allow you to setup the Audio device and sound status depending on the audio system in use.
You can also set NICAM mode.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
3. Press the ▲▼ buttons to select Audio, then press the OK or ►
button.
4. Press the ▲▼ buttons to select the desired audio option, then
press the OK or ► button.
5. Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
HDD & DVD RECORDER
Setup
HDD
Library
Guide
Channel
System
►
Clock Set
►
Language
►
Audio
Timer Record
Video
Disc Manager
Parental Lock
Setup
m MOVE
►
►
1
►
Recording
sSELECT
►
rRETURN
eEXIT
English _39
01587A-SH871M-XEU-ENG.indb 39
2008-04-17 오후 2:00:10
system setup
Digital Output
• PCM : Select this when your equipment is not Dolby Digital
(or MPEG-2) compatible.
• Bitstream : Outputs Dolby Digital (or MPEG-2) audio as bitstream.
Select this when your AV receiver or AV amplifier has a
Dolby Digital (or MPEG-2) Decoder.
HDD & DVD RECORDER
Audio
HDD
Library
Guide
Channel
Digital Output
: PCM
PCM
DTS
Bitstream
: Off
✔►
►
DRC
: On
►
NICAM
: On
►
Timer Record
Disc Manager
Setup
m MOVE
M
sSELECT
rRETURN
eEXIT
 Digital output setting is equally applied to both Dolby Digital and MPEG-2 audio. LPCM sound track is always
outputted as PCM. It has no relation with Digital Output setting.
 Be sure to select the correct Digital Output or you will hear no sound or a loud noise.
DTS
• Off : Doesn’t output DTS signal. Select this when your AV receiver
(or AV amplifier) does not have DTS decoder.
• On : Outputs DTS Bitstream via digital output when you play DTS
track. Select this only when your AV receiver (or AV amplifier)
have DTS decoder.
HDD & DVD RECORDER
Audio
HDD
Library
Guide
Channel
Digital Output
: PCM
►
DTS
: Off
Off
✔►
DRC
On
: On
►
: On
►
NICAM
Timer Record
Disc Manager
M
 When DTS soundtrack is played, sound does not output from
AV Audio Output.
Setup
m MOVE
sSELECT
rRETURN
eEXIT
DRC
This is only active when a Dolby Digital signal is detected.
• On : When Movie soundtracks are played at low volume or from
smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
• Off : You can enjoy the movie with the standard Dynamic Range.
HDD & DVD RECORDER
Audio
HDD
Library
Guide
Channel
Digital Output
: PCM
►
DTS
: Off
DRC
: On
Off
►
NICAM
On
: On
✔►
►
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM
Mono and Bilingual (transmission in another language). NICAM
programmes are always accompanied by a standard mono sound
broadcast and you can select the desired sound by setting NICAM
on or off.
• On : NICAM mode
• Off : Only set at this position to record the standard mono
sound during a NICAM broadcast if the stereo sound is
distorted due to inferior reception conditions.
HDD & DVD RECORDER
Audio
HDD
Library
Guide
Channel
Digital Output
: PCM
►
DTS
: Off
►
DRC
: On
NICAM
Timer Record
Off
: On
On
►
►
✔
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
40_ system setup
01587A-SH871M-XEU-ENG.indb 40
2008-04-17 오후 2:00:14
SETTING UP THE VIDEO OPTIONS
This function allows you to setup the video setting.
This function depends on disc type. It may not work for some disc types.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
4. Press the ▲▼ buttons to select the desired video option, then
press the OK or ► button.
Setup
HDD
Library
Guide
Channel
System
►
Clock Set
►
Language
►
Audio
Timer Record
Video
Disc Manager
Parental Lock
Setup
m MOVE
►
►
1
►
Recording
sSELECT
►
rRETURN
eEXIT
5. Press the ▲▼ buttons to select the desired item, then press the OK or ► button.
TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the total 16:9 ratio
screen DVD supplies, even though you have a TV
with a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
HDD & DVD RECORDER
● SYSTEM SETUP
3. Press the ▲▼ buttons to select Video, then press the OK or ►
button.
Video setup menu will be displayed.
HDD & DVD RECORDER
Video
HDD
Library
Guide
Channel
Timer Record
TV Aspect
: 4:3
Letter
Box
4:3
Letter
Box
Pan-Scan
3D Noise Reduction 4:3
: Off
16:9
Wide
Video Output
: Component
►
►
✔►
HDMI Resolution
: 576p
►
Component output
: Interlace
►
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
• 4:3 Pan-Scan : Select this for conventional size TV when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture will be cut off.)
• 16:9 Wide : You can view the full 16:9 picture on your wide screen TV.
3D Noise Reduction (motion adaptive noise reduction)
• Off : Normal
• On : Provides a clear picture through noise reduction (for
recording).
HDD & DVD RECORDER
Video
HDD
Library
Guide
Channel
Timer Record
TV Aspect
: 16:9 Wide
3D Noise Reduction Off
: Off
►
✔►
On
: Component
Video Output
►
HDMI Resolution
: 576p
►
Component output
: Interlace
►
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
Video Output
You can enjoy high quality image through RGB or Component video
connections. RGB video output is available connecting scart jack
(AV1) and component video output is available connecting
component (Y, PB, PR) jack. Only one of these signals can be
selected at one time.
• Component
• RGB
HDD & DVD RECORDER
Video
HDD
Library
Guide
Channel
Timer Record
TV Aspect
: 16:9 Wide
3D Noise Reduction
: Off
: Component
Component
HDMI Resolution
RGB
: 576p
Component output
►
►
Video Output
✔►
►
: Interlace
►
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
English _41
01587A-SH871M-XEU-ENG.indb 41
2008-04-17 오후 2:00:19
system setup
In Component mode, you can set video output to Progressive or Interlace, see page 43.
When the HDMI cable (not supplied) is not connected, available video output jacks are as follow.
Available Video Output Jack
Setting mode
Output jack
Component Output (Y, PB, PR)
AV1 Scart
RGB MODE
O
X
R, G, B
X
O
Composite
O
X
O
O
Composite Video out
M
Component mode
 When the HDMI cable(not supplied) is connected, RGB output does not operate. Video output is set to Component.
HDMI Resolution
This setting is used when the unit is connected by HDMI with Display
devices (TV, projector, etc).
•
•
•
•
576P : 720 x 576
720P : 1280 x 720
1080i : 1920 x 1080
1080P : 1920 x 1080
HDD & DVD RECORDER
Video
HDD
Library
Guide
Channel
Timer Record
TV Aspect
: 16:9 Wide
3D Noise Reduction
: Off
Video Output
: 576p
576p
Component output
720p
: Interlace
1080i
►
✔►
►
1080p
Setup
m MOVE
►
: Component
HDMI Resolution
Disc Manager
►
sSELECT
rRETURN
eEXIT
Output selection
• Connect the HDD & DVD Recorder to your TV via HDMI.
Set your TV’s input to HDMI.
M
 Progressive scan automatically activates when HDMI is connected.
 Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported,
follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
 If Video Output is set incorrectly, the screen may be blocked.
 The resolutions available for HDMI output depend on the connected TV or projector. For details, see the user’s
manual of your TV or projector.
 When the resolution is changed it may take a few seconds for a normal image to appear.
42_ system setup
01587A-SH871M-XEU-ENG.indb 42
2008-04-17 오후 2:00:25
COMPONENT OUTPUT (PROGRESSIVE SCAN)
This function is available when video output is component. This setting enables you to select a desired progressive
mode. To view ‘Progressive scan mode’, first connect the component cable. (See page 23) Be sure the Component
cables are connected properly.
• Progressive
HDD & DVD RECORDER
• Interlace
M
Library
Guide
Channel
Timer Record
The message "Do you want to maintain interlace mode? Reverting
in 10 seconds." will be displayed.
Select "Yes" to revert interlace mode.
Video
HDD
TV Aspect
: 16:9 Wide
►
3D Noise Reduction
: Off
►
Video Output
: Component
HDMI Resolution
: 576p
Component output
►
►
: Interlace
Interlace
Progressive
Disc Manager
✔►
Setup
m MOVE
sSELECT
rRETURN
eEXIT
 When the HDMI cable (not supplied) is connected, this screen is not displayed.
● SYSTEM SETUP
The message "Do you want to maintain progressive mode?
Reverting in 10 seconds." will be displayed.
Select "Yes" to revert progressive mode.
SETTING UP THE PARENTAL LOCK
The Parental Lock function works in conjunction with DVDs and DVB-T that have been assigned a rating which
helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Z
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
3. Press the ▲▼ buttons to select Parental Lock, then press the
OK or ► button.
When you operate your HDD & DVD Recorder for the first time,
the “Create the Password” message will be displayed.
HDD & DVD RECORDER
Setup
HDD
Library
Guide
Channel
System
►
Clock Set
►
Language
►
Audio
Timer Record
Video
Disc Manager
Parental Lock
Setup
m MOVE
►
►
1
►
Recording
sSELECT
4. Enter the 4-digit password using the number buttons on the
remote control.
The “Confirm the password” message will be displayed. Enter your password again.
►
rRETURN
eEXIT
If you forgot your password
1. Switch the DVD mode and remove the disc.
2. Press and hold the PLAY/PAUSE (
) button on the front panel for 10 seconds or more.
Setting the Programme Grade
1. Press the ▲▼ buttons to select Programme Grade, then press
the OK or ► button.
2. Press the ▲▼ buttons to select the programme grade you want,
then press the OK or ► button.
For example, if you select up to 15, DVB-T that contain 16, 17 will
not display. A larger number indicates that the programme is
intended for adult use only.
HDD & DVD RECORDER
Parental Lock
HDD
Library
Guide
Channel
Programme Grade
DVD Level
Change Password
Timer Record
Disc Manager
►
Off
17
16
15
14
13
12
11
►
►
Setup
m MOVE
sSELECT
rRETURN
eEXIT
English _43
01587A-SH871M-XEU-ENG.indb 43
2008-04-17 오후 2:00:28
system setup
Setting the DVD Level
1. Press the ▲▼ buttons to select DVD Level, then press the OK
or ► button.
2. Press the ▲▼ buttons to select the DVD Level you want, then
press the OK or ► button.
For example, if you select up to 6, discs that contain 7, 8 will not
play.
A larger number indicates that the programme is intended for
adult use only.
HDD & DVD RECORDER
Parental Lock
HDD
Library
Guide
Channel
Programme Grade
DVD Level
Change Password
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
►
Off
Level8-Adults
Level7
Level6
Level5
Level4
Level3
Level2
rRETURN
✔►
►
eEXIT
Changing the Password
1. Press the ▲▼ buttons to select Change Password, then press
the OK or ► button.
2. Enter the 4-digit password using the number buttons on the
remote control. The “Confirm the password” message will be
displayed.
3. Enter your password again using the number buttons on the
remote control.
HDD & DVD RECORDER
Parental Lock
HDD
Library
Guide
Channel
Programe Grade
: Off
►
DVD Level
: Off
►
Change Password
►
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
SETTING UP THE RECORDING OPTIONS
Automatic Chapter Creator
CVKL
(V-mode)
A DVD-Video consists of ‘Titles’ and ‘Chapters’. When you record one programme, it makes one Title.
If you use this function, the Title will be divided into Chapters.
1. With the unit in Stop mode, press the MENU button.
Recording
HDD & DVD RECORDER
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
HDD
button.
Library
Chapter Creator
: On
Off
On
✔
EP Mode Time
: 6 Hours
Guide
3. Press the ▲▼ buttons to select Recording, then press the OK
EZ Record
: Off
Channel
or ► button.
V-Mode Compatibility : Off
Timer Record
4. Press the ▲▼ buttons to select Chapter Creator, then press
Disc Manager
the OK or ► button.
Setup
5. Press the ▲▼ buttons to select Off or On, then press the OK or
m MOVE
sSELECT
rRETURN
eEXIT
► button.
• Off : Select if you do not want to use Automatic Chapter Creator.
• On : Select this option to use the Automatic Chapter Creator feature.
Press the EXIT button to exit the menu.
►
►
►
►
6. Press the REC button to start recording.
(See page 69 about how to set recording speed)
The message “Do you want to create the chapter menu after this recording?” is displayed.
7. Press the ◄ ► buttons to select OK, then press the OK button.
• A new chapter is created according to the selected recording mode. A chapter will be about 5 minutes
long in XP and SP, and about 15 minutes long in LP and EP mode.
44_ system setup
01587A-SH871M-XEU-ENG.indb 44
2008-04-17 오후 2:00:32
8. Press the STOP button to stop recording.
9. To display the created titles, finalise the disc (See page 100) and then press the TITLE MENU button. The
title menu will be displayed.
• Finalising is generally unnecessary when using a DVD+RW disc.
10.To display the created chapters, select the desired Title and then press the DISC MENU button. The
chapter menu for the selected Title will be displayed.
 The Automatic Chapter Creator function does not work during Timer Recording or when you turn the power off.
EP Mode Time Setting
You can select one of four recording modes by pressing the REC
MODE button repeatedly.
In EP(Extended Play) mode, you can set recording time to 6 or 8
hours with this setting.
HDD & DVD RECORDER
Recording
HDD
Library
Guide
Channel
Chapter Creator
: On
EP Mode Time
►
6 Hours
6:Hours
Off
8:Hours
EZ Record
✔►
►
V-Mode Compatibility : Off
● SYSTEM SETUP
J
►
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
EZ Record
CVKL
(V-mode)
This function enables you to initialise and Finalise a disc automatically.
1. Press the ▲▼ buttons to select EZ Record, then press the OK
or ► button.
HDD & DVD RECORDER
2. Press the ▲▼ buttons to select On, then press the OK or ►
button.
Press the EXIT button to exit the menu.
3. Insert a disc.
If the disc is new, It is initialised to V mode automatically.
(DVD-RW only)
Recording
HDD
Library
Guide
Channel
Chapter Creator
EP Mode Time
EZ Record
: On
►
: 6 Hours
►
: Off
Off
✔►
V-Mode Compatibility On
: Off
►
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
4. Press the REC button.
5. EZ Record function will automatically Finalise the disc under the following conditions.
• When you press the OPEN/CLOSE button on your HDD & DVD Recorder after recording on at least
70% of the disc.
The tray will open after the disc has been finalised.
• The above feature is available only when a DVD-RW(V), DVD+R or DVD-R disc is inserted.
M
 If you insert a new DVD-RW disc, It is initialised to V mode automatically.
 If you insert a new DVD+RW disc, it will be formatted automatically.
 If you select off, you must initialise (see page 68) and finalise the disc manually in the Disc Manager menu. (see
page 100)
 The length of Recording is different according to recording mode. (see page 69)
English _45
01587A-SH871M-XEU-ENG.indb 45
2008-04-17 오후 2:00:37
system setup
V-Mode Compatibility
This feature is about the setup for selecting audio when recording
the Dual STEREO (Multi-audio) broadcasting on HDD. It does not
directly affect DVD recording of a programme.
• Off : Both “Dual L” and “Dual R” of the multi-audio broadcasting
are recorded on HDD. Titles recorded on HDD under such
setup status cannot be copied to DVD+RW/±R or DVD-RW
(V mode).
• On : Either “Dual L” or “Dual R” of the multi-audio broadcasting is
recorded on HDD. Titles recorded on HDD under such setup
status can be copied to DVD+RW/±R or DVD-RW (V mode)
“Dual L” and “Dual R” options can be selected from “Audio
Selection.”
HDD & DVD RECORDER
Recording
HDD
Library
Guide
Channel
Timer Record
Chapter Creator
: On
►
EP Mode Time
: 6 Hours
►
EZ Record
: Off
►
V-Mode Compatibility Off
: Off
✔►
On
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
HDD & DVD RECORDER
eEXIT
Recording
HDD
Library
Guide
Channel
Timer Record
Chapter Creator
: On
►
EP Mode Time
: 6 Hours
►
EZ Record
: Off
►
V-Mode Compatibility : On
Audio Selection
: OffL
Dual
►
✔►
Dual R
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
46_ system setup
01587A-SH871M-XEU-ENG.indb 46
2008-04-17 오후 2:00:41
DTV functions
BASIC FUNCTIONS
Display Screen
Banner Elements
Displays the favorite channel.
HDD
DTV
001
Displays the teletext.
● DTV FUNCTIONS
After the television channels have been stored, you will see the following picture(banner) each time you switch
channels.
TF1
Displays the subtitle.
Displays the multi audio.
M
 The icon is displayed according to the service information of signal.
 The icon is displayed only with more than one audio type and language.
 By pressing the button, you can see the detailed information.
Select Audio Track
1. Press the AUDIO button to see the Audio track list.
2. Press the ▲▼ buttons to select desired Audio track, then press
the OK button.
Audio Track ENG MPEG
>Change
Setting the Favourtie Channel
You can immediately register the present channel to the Digital
Favorite Channel List.
Favorite DTV 1
001 BBC THREE
1. Press the FAV LIST button while you are viewing a programme.
2. To add the current channel to the Digital Favorite channels, press
the YELLOW(C) button.
To delete a favorite channel from the Digital Favorite channel list,
press the RED(A) button.
002 BBC NEWS 24
Remove
#/$ Page
Add Current
r Return
– To watch the favorite channel –
Press the FAV LIST button and then select the channel.
Press the OK button to watch that channel.
M
 You can make up to 8 digital favourite lists(4 TV favourite lists and 4 radio favourite list)
English _47
01587A-SH871M-XEU-ENG.indb 47
2008-04-17 오후 2:00:44
DTV functions
Changing the Subtitle Language
When the current broadcasting programme provides subtitle, press
the SUBTITLE button . If Subtitle is available on current programme,
menu bar is displayed on the upper side.
Subtitle OFF
1. Press the SUBTITLE button.
2. Press the ▲▼ buttons to select a desired subtitle, then press the
OK button.
>Change
Using the digital text service
When the current broadcasting programme provides teletext, press
the TEXT button to see the teletext.
B B C
i
100
Saturday 4 May
Press SELECT for
1. Press the TEXT button, the main menu of digital text will be
displayed.
>
2. Press the ▲▼ or number button to select desired digital text, then
press the OK button.
Live Snooker
Castaway
News Multiscreen
Sport
Weather
BBCi INDEX
1001
300
400
199
Election 2007:Get the
latest results on page 700
M
 Press the EXIT button to exit the main menu of digital text.
To exit, press TEXT
GUIDE
The electronic programme guide gives you a channel list for the channels.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Guide, then press the OK or ►
button.
• Press the GUIDE button while you are viewing a programme.
(DTV)
• RED(A) button (Timer Record) : Setting the Timer Record.
• ($)button : Go to next day
• (#)button : Go to previous day
€ It displays programme from now to 7 days after.
• ▲▼◄ ► button : select the programme and station.
• INFO button (Information) : View the detail information
M
DTV Guide
12:00 TUE 1 JAN 2008
12:00 - 12:25 Blue Peter
TUE 1 JAN
001
BBC ONE
002
BBC TWO
007
BBC THREE
030
CBBC Channel
040
BBC NEWS 24
001
BBCi
A
12:30
13:00
Blue Peter
---
---
The Weakest Link
Basli Brush
Neighbours
---
Tracy
Beake
13:30
BBC News
Look North
Beg. Borrow or Steal
Strictly Come Dancing: It T
Blue Peter
BBC News
Out There
BBC News
BBCi
---
BBCi
Timer Rec
#/$ PREVIOUS/NEXT PAGE
INFO
INFORMATION
 The contents of cell could be displayed slowly according to the broadcasting.
 If 'Daylight Saving Time' and 'GMT Time' settings are wrong, EPG Time will be incorrect.
48_ DTV functions
01587A-SH871M-XEU-ENG.indb 48
2008-04-17 오후 2:00:45
Guide Timer Recording
Make sure that clock must be set before operating this function.
(see pages 33~34)
1. Press the ▲▼◄ ► buttons to select desired programme, then
press RED(A) button.
12:00 - 12:25 Blue Peter
TUE 1 JAN
001
BBC ONE
002
BBC TWO
007
BBC THREE
030
CBBC Channel
040
BBC NEWS 24
001
BBCi
A
12:30
---
The Weakest Link
Basli Brush
M
 The title information is displayed in the Title List as for Guide REC.
 If Timer Rec is set, the icon is displayed in the set programme.
13:30
Neighbours
BBC News
Look North
Beg. Borrow or Steal
Strictly Come Dancing: It T
Tracy
Beake
---
Blue Peter
BBC News
Out There
BBC News
BBCi
---
BBCi
Timer Rec
#/$ PREVIOUS/NEXT PAGE
INFO
INFORMATION
DTV Guide
12:00 TUE 1 JAN 2008
12:00 - 12:25 Blue Peter
Timer Rec
TUE 1 JAN
 You can check the setting in the scheduled List. (see pages 76~77)
13:00
Blue Peter
---
001
BBC ONE
002
BBC TWO
007
BBC THREE
030
CBBC Channel
040
BBC NEWS 24
001
BBCi
A
12:30
13:00
Blue Peter
---
---
The Weakest Link
Target Media
Neighbours
Series Recording
Basli Brush
Save
13:30
BBC News
:◄
HDD
►
:◄
Off
►
---
Beg. Borrow or Steal
Tracy
Beake
Blue Peter
Out There
Cancel
BBC News
Look North
Strictly Come Dancing: It T
BBC News
BBCi
---
BBCi
● DTV FUNCTIONS
2. Set timer recording option.
• Target Media: Select the media to record HDD or DVD.
• Series Recording: With the series recording function, you can
easily and automatically record every episode of a series.
Select 'On' if you want to use series recording function.
The Series Recording option will be dimmed if the selected
programme is not one of a series.
DTV Guide
12:00 TUE 1 JAN 2008
Timer Rec
#/$ PREVIOUS/NEXT PAGE
INFO
INFORMATION
 Up to 12 recordings are possible including guide recording and general
recording.
English _49
01587A-SH871M-XEU-ENG.indb 49
2008-04-17 오후 2:00:47
playback
This section introduces basic functions of playback and playback by disc type.
Read the following information before playing a disc.
REGION CODE (DVD-VIDEO ONLY)
Both the HDD & DVD Recorder and the discs are coded by region. These regional codes must match in
order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this HDD
& DVD Recorder is described on the rear panel of the HDD & DVD Recorder.
LOGOS OF DISCS THAT CAN BE PLAYED
Dolby Digital
Stereo
DTS
PAL broadcast system in U.K,
France, Germany, etc.
Digital Audio
DivX
MP3
Disc Shape
Max. Playing Time
Single sided(12cm)
Double sided(12cm)
Single sided(8cm)
Double sided(8cm)
Single sided(12cm)
Single sided(8cm)
Single sided(12cm)
Single sided(8cm)
Single sided(12cm)
Single sided(8cm)
Single sided(12cm)
Single sided(8cm)
240 min.
480 min.
80 min.
160 min.
74 min.
20 min.
1 hr. (XP: Excellent Quality)
2 hrs. (SP: Standard Quality)
4 hrs. (LP: Long Playback)
6 or 8 hrs. (EP:Extended)
2 hr. (XP: Excellent Quality)
4 hrs. (SP: Standard Quality)
8 hrs. (LP: Long Playback)
12 or 16 hrs. (EP:Extended)
DISC TYPES THAT CAN BE PLAYED
Disc Types
DVD-VIDEO
Disc Logo
content
Recorded
content
AUDIO
VIDEO
AUDIO-CD
AUDIO
JPEG
JPEG Image
MP3
MP3 Audio
DivX
DivX Movie
Single sided(12cm)
(4.7GB)
DVD-RAM
AUDIO
VIDEO
Double sided(12cm)
(9.4GB)
50_ playback
01587A-SH871M-XEU-ENG.indb 50
2008-04-17 오후 2:00:48
Disc Types
Disc Logo
content
DVD-RW
Recorded
content
AUDIO
VIDEO
Disc Shape
12cm (4.7GB)
DVD-R
AUDIO
VIDEO
Dual Layer(12cm)
(8.5GB)
DVD+RW
AUDIO
VIDEO
12cm (4.7GB)
Single Layer(12cm)
(4.7GB)
DVD+R
AUDIO
VIDEO
Dual Layer(12cm)
(8.5GB)
CD-R/-RW
DVD-RAM/-RW/-R
1 hr (XP: Excellent Quality)
2 hrs (SP: Standard Quality)
4 hrs (LP: Long Playback)
6 or 8 hrs (EP:Extended)
1 hr (XP: Excellent Quality)
2 hrs (SP: Standard Quality)
4 hrs (LP: Long Playback)
6 or 8 hrs (EP:Extended)
1 hr. 50min (XP : Excellent Quality)
3 hrs. 40min (SP : Standard Quality)
7 hrs. 20min (LP : Long Playback)
11 or 14 hrs. 40min (EP : Extended)
1 hr (XP: Excellent Quality)
2 hrs (SP: Standard Quality)
4 hrs (LP: Long Playback)
6 or 8 hrs (EP:Extended)
1 hr (XP: Excellent Quality)
2 hrs (SP: Standard Quality)
4 hrs (LP: Long Playback)
6 or 8 hrs (EP:Extended)
1 hr. 50min (XP : Excellent Quality)
3 hrs. 40min (SP : Standard Quality)
7 hrs. 20min (LP : Long Playback)
11 or 14 hrs. 40min (EP : Extended)
● PLAYBACK
Single Layer(12cm)
(4.7GB)
Max. Playing Time
JPEG
MP3
-
-
DivX
Discs that cannot be played
•
•
•
•
•
•
•
DVD-Video with a region number other than “2” or “ALL”
3.9 GB DVD-R Disc for Authoring.
DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard
A DVD±R/DVD-RW(V) disc which has been recorded and not finalised in a different manufacturer’s recorder.
DVD-ROM/PD/MV-Disc, etc
VCD/SVCD/CVD/CD-ROM/CDV/CD-G/CD-I
BD, HD-DVD
M
 This HDD & DVD Recorder can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
 Playback and/or recording may not work for some types of discs, or when specific operations, such as angle change
and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please
refer to this if necessary.
 Do not allow the disc to become dirty or scratched, finger prints, dirt, dust, scratches or deposits of cigarette smoke
on the recording surface may make it impossible to use the disc for recording.
 DVD-RAM/±RW/±R discs may not be able to play on some DVD players, depending on the player, disc and the
condition of the recording.
 Discs with NTSC programmes recorded on them can be played but cannot be recorded using this product.
English _51
01587A-SH871M-XEU-ENG.indb 51
2008-04-17 오후 2:00:49
playback
PLAYING A DISC
1. Press the OPEN/CLOSE button.
2. Place a disc gently into the tray with the disc’s label facing up.
3. Press the OPEN/CLOSE button to close the disc tray.
• The HDD & DVD Recorder does not play discs automatically after being powered on initially.
• When the HDD & DVD Recorder is powered on and a disc is in the tray, the unit will be activated and
wait in stop status.
• Press the PLAY( ) button to start playback.
4. Press the STOP(
) button to stop playback.
M
 When you stop playing back a disc, the HDD & DVD Recorder remembers where you stopped, so when you press
J





PLAY( ) button again, it will pick up where you left off. (Unless the disc is removed or the HDD & DVD Recorder is
unplugged, or if you press the STOP( ) button twice.)
Do not move your HDD & DVD Recorder while playing, as this may cause damage to the disc.
Make sure to press the OPEN/CLOSE button to open or close the disc tray.
Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.
Do not place foreign materials on or in the disc tray.
Some functions may perform differently or be disabled depending on the disc type.
If this occurs, refer to the instructions written on the disc case.
 Be especially careful that children’s fingers are not caught between the disc tray and the tray chassis when it closes.
 You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause
damage to the HDD & DVD Recorder.
USING THE DISC MENU & TITLE MENU
Some type of discs contain a dedicated menu system that allows you to select special functions for title, chapter,
audio track, subtitle, film preview, information on characters, etc.
For DVD-VIDEO Disc
Z
• Disc Menu : Press the DISC MENU button to enter the disc menu of the disc.
• Move to the setup menu related to playback operation.
• You can select audio language and subtitle etc. provided by the disc.
• Title Menu : Press the TITLE MENU button to move to the title menu of the disc.
• Some discs may not support the title menu functionality.
For HDD/DVD-RAM/±RW/±R Disc
SXCVKL
• Title List
Press the TITLE LIST button. Title List is a list of previously recorded programmes. If a title is deleted, that
title cannot be played again.
• Play List (HDD/DVD-RAM/-RW(VR))
Press the PLAY LIST button. This refers to a list of user-selected titles. When one playlist is played, only the
scene selected by the user will play and then stop. Since only the information necessary for playing a
desired scene is included in a playlist, even if that playlist is deleted, the original recording will not be
deleted. (only VR mode)
52_ playback
01587A-SH871M-XEU-ENG.indb 52
2008-04-17 오후 2:00:50
USING THE PLAYBACK RELATED BUTTONS
Searching through a Chapter or Track
SZXCV
During play, press the SEARCH (
KL
) buttons on the remote control.
X2­X4­X8­
HDD/DVD-VIDEO/
● PLAYBACK
 X 16 ­  X 32 ­  X 128 ­
DVD-RAM/±RW/±R
DivX
X2­X4­X8
AUDIO CD (CD-DA)
X2­X4­X8
• You can scan the programme in reverse.
• When you press and hold the SEARCH (
) buttons, playback is done at the default speed of X 4.
) buttons , playback is performed at a normal speed.
If you release the SEARCH (
• To return to normal speed playback, press the PLAY ( ) button.
M
 You can hear sound during forward search(X 2) in HDD/DVD-VIDEO/DVD-RAM/±RW/±R disc.
(No sound is heard during Scan(Search) mode in DivX disc.)
 The speed marked in this function may be different from the actual playback speed.
Skipping Chapters, Titles or Markers
SXCV
During play, press the SKIP (
KL
) buttons on the remote control.
• If you press the SKIP ( ) button,
it moves to the beginning of the chapter or Title or marker Pressing the button once again within 3 seconds
returns to the beginning of the previous chapter or Title or marker
• If you press the SKIP ( ) button,
it moves to the next chapter or track or marker
Slow Motion Play
SZXCVKLD
In pause mode, press the SEARCH (
) buttons on the remote control.
• If you press the SEARCH ( ) button,
 1/2 Œ  1/4 Œ  1/8
• If you press the SEARCH ( ) button,
 1/2 Œ  1/4 Œ  1/8
• To return to normal speed playback, press the PLAY (
) button.
Press and hold the SEARCH (
) buttons during pause, the disc will play slowly at 1/4 speed. If the
button is released, the pause operation will resume.
M
 The speed marked in this function may be different from the actual playback speed.
 Slow motion operates only in the forward direction on DivX discs.
English _53
01587A-SH871M-XEU-ENG.indb 53
2008-04-17 오후 2:00:52
playback
Step Motion Play
SZXCVKLD
Press the SKIP( , ) buttons on the remote control in the pause mode.
• Each time the button is pressed, a new frame will appear.
When the SKIP( ) button is pressed, the previous frame will be activated.
When the SKIP( ) button is pressed, the next frame will be activated.
• To return to normal speed playback, press the PLAY ( ) button.
M
 Step motion operates only in the forward direction on DivX discs.
USING THE INFO BUTTON
The INFO function allows you to easily search for a desired scene by accessing title, chapter, time.
You can also change the subtitle and audio settings and set some features including Angle, Repeat, Zoom.
Moving to a scene directly using the INFO
SZXCVKLD
If you want to move to a certain title, chapter or time, use this
function.
1. Press the INFO button during playback.
2. Press the ▲▼ buttons to select Search, then press the OK
button or ► button.
DVD-VIDEO
t Search
O Subtitle
Q Audio
z Angle
P Repeat
v Zoom
>MOVE
Info
|
Off
ENG Dolby Digital 5.1 CH
1/1
Off
Off
|
<CHANGE
3. Press the ▲▼ buttons to select Title, Chapter or Time.
4. Press the ◄ ► buttons or number buttons to select the desired
scene, then press the OK button.
In case of searching a time, enter the time in the sequence of hours, minutes, and seconds using the
number buttons. Then press the OK button.
M
 This may not work for some discs.
When an audio CD(CD-DA) or an MP3/JPEG disc is inserted, depending on the disc type, the information display
may not appear.
 The Time Search function does not operate on some discs.
 To make the screen disappear, press the RETURN button.
SELECTING THE SUBTITLE LANGUAGE
ZD
Selects one of the subtitle language recorded on the disc.
You can also operate this function by pressing the SUBTITLE button on the remote control.
1. Press the INFO button during playback.
2. Press the ▲▼ buttons to select Subtitle.
3. Press the ◄ ► buttons to select the desired subtitle language.
M
 The subtitle display may be different depending on the disc type.
 Some discs will only allow you to select the language for the disc menu.
54_ playback
01587A-SH871M-XEU-ENG.indb 54
2008-04-17 오후 2:00:54
SELECTING THE SOUNDTRACKS & AUDIO CHANNELS
SZXCKLD
Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV
programmes.
You can also operate this function by pressing the AUDIO button on the remote control.
1. Press the INFO button during playback.
● PLAYBACK
2. Press the ▲▼ buttons to select Audio.
3. Press the ◄ ► buttons to select the desired sound tracks or audio channel.
M
 Soundtracks or Audio channel may be different because they are disc-specific.
 Some discs allow you to select the audio language for the disc menu only.
CHANGING THE CAMERA ANGLE
Z
When a DVD VIDEO contains multiple angles of a particular scene, you can select the Angle function.
1. Press the INFO button during playback.
2. Press the ▲▼ buttons to select Angle.
3. Press the ◄ ► buttons to select the desired angle.
M
 This function is disc-dependent, and may not work on all DVDs.
 This function does not work when a DVD has not been recorded with a multi-camera angle system.
 Displays the current angle, total angle number.
REPEAT PLAY
Playing Repeatedly (Repeat Playback)
SZXCVKLD
You can also operate this function by pressing the REPEAT button on the remote control.
1. Press the INFO button during playback.
2. Press the ▲▼ buttons to select the Repeat.
3. Press the ◄ ► buttons to select Off, A-B or Title or Chapter you want to play repeatedly, then press the
OK button.
M
 HDD/DVD-RAM/-RW(VR mode), unfinalised DVD±R and unfinalised DVD-RW (V mode) discs will do not repeat a
chapter.
 You can also activate Normal Playback by pressing the EXIT(
) button.
English _55
01587A-SH871M-XEU-ENG.indb 55
2008-04-17 오후 2:00:55
playback
Repeat A-B
SZXCVKL
1. Press the INFO button during playback.
Repeat
2. Press the ▲▼ buttons to select Repeat.
A-B >
3. Press the ◄ ► buttons to select Repeat A-B, then press the OK
button.
4. Press the OK button at the point where you want the repeat play
to start (A) and press it again at the point where you want the
repeat play to stop (B). Repeat playback of the A-B section starts.
M
>CHANGE
sSELECT
 If you set point (B) before five seconds of playback has lapsed, the prohibition mark ( ) will appear.
 You can also activate Normal Playback by pressing the EXIT(
) button.
 Audio CDs(CD-DA), MP3 discs and DivX discs do not support the Repeat A-B function.
ZOOMING-IN
SZXCVKL
1. Press the INFO button during playback.
2. Press the ▲▼ buttons to select Zoom, then press the OK or ►
button.
( ) will be displayed.
3. Press ▲▼◄ ► buttons to move to the area you want to enlarge.
4. Press the OK button.
The screen will be enlarged to twice the normal size. The screen
size will be enlarged to four times the normal size.
HDD/DVD-VIDEO/DVD-RAM/±RW/±R
M
normal size → X2 → X4 → X2 → normal size
 When the recording is done in EP mode, the zoom function is not supported except when the recording has been in
DVD-VIDEO and finalised DVD-R/-RW(V).
56_ playback
01587A-SH871M-XEU-ENG.indb 56
2008-04-17 오후 2:00:56
USING MARKERS
SXC
(VR mode)
Set marks at scenes you want to see again so that you can start playback from the marked position.
Setting Markers
1. Press the MARKER button during playback.
Marker
01 02 -- -- -- -- -- -- -- -- N : 2
3. Press the ► button to move to the next position.
4. Press the OK button again when the desired scene appears.
• The number 02 is displayed and the scene is memorised.
• HDD, DVD-RAM or DVD-RW (VR Mode) discs have the Marker
< MOVE
sPLAY
Cancel
rRETURN
function instead of the Bookmark function. Since the scenes
may be displayed as many different pages, numbering is necessary.
If a disc in use is encoded with Disc Protection, Markers cannot be set or deleted, only playback is available.
● PLAYBACK
2. Press the OK button when the desired scene appears.
• The number 01 is displayed and the scene is memorised.
Playing back a marker
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a marked scene.
3. Press the OK or PLAY ( ) button to start playing from the selected scene.
• If you press the SKIP ( ) button, it moves to the beginning of the marker. Pressing the button once
again within 3 seconds returns to the beginning of the previous marker.
• If you press the SKIP ( ) button, it moves to the next marker.
Clearing a marker
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a marked scene.
3. Press the RED(A) button to delete the selected mark.
• When a marker is cleared while HDD/DVD-RAM/-RW (VR mode) is playing, marker numbers will change.
For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the
eighth will automatically move ahead by one and the 8th marker becomes the 7th.
USING THE BOOKMARKS
ZCVKL
(V mode)
Setting Bookmarks
1. Press the MARKER button during playback.
2. Press the OK button when the desired scene appears.
• The number 1 is displayed and the scene is memorised.
Bookmark
1 2 - - - - - - - --
3. Press the ► buttons to move to the next position.
4. Press the OK button again when the desired scene appears.
The number 2 is displayed and the scene is memorised.
• Repeat above to bookmark other positions.
• You can bookmark up to 10 scenes.
M
< MOVE
sPLAY
Cancel
rRETURN
 When the disc tray is opened and then closed, bookmarks will disappear.
English _57
01587A-SH871M-XEU-ENG.indb 57
2008-04-17 오후 2:00:58
playback
Playing back a bookmark
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a bookmarked scene.
3. Press the OK or PLAY(
) button to start playing from the selected scene.
Clearing a bookmark
1. Press the MARKER button during playback.
2. Press the ◄ ► buttons to select a bookmarked scene.
3. Press the RED(A) button to delete the selected bookmark.
PLAYING AN AUDIO CD/MP3
Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback
SKIP (
) button : Moves to the previous or next page.
Press the SEARCH (
) buttons : Fast Play
(X 2, X 4, X 8) (Audio CD only)
STOP (
PAUSE (
PLAY (
(song).
) button : Stops a track(song).
) button : Pauses playback.
) button, OK button : Plays the selected track
▲▼ : Selects a track (song).
7
RED(A) button : • Creates a playlist or go to playlist.
• Select All : MP3, CD-DA
• Copy : MP3
• CD Import : Audio CD
8
GREEN(B) button : Selects the sort order. (MP3 disc only)
9
YELLOW(C) button : Selects the play mode. (REPEAT)
10 BLUE(D) button : Selects a contents. (MP3 disc only)
Playing an Audio CD(CD-DA)
1. Insert an audio CD (CD-DA) into the disc tray.
• The audio CD menu appears and the tracks (songs) are played automatically.
2. Press the ▲▼ buttons to select the track (song) you want to hear, and then press the OK button.
58_ playback
01587A-SH871M-XEU-ENG.indb 58
2008-04-17 오후 2:01:00
Audio CD(CD-DA) Screen Elements
CD
Music List
TRACK01
1/10
No.
TRACK01
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
Edit
Length
4:19
3:57
3:57
4:03
4:09
5:08
3:31
Displays the current file type and file name.
Display available buttons.
● PLAYBACK
Q
002
003
004
005
006
007
  ►   00:02:22
CDDA
Title
Current track (song) : Displays the number of the track
currently being played.
Displays available buttons and a playback time
corresponding to a portion that is currently played.
Play Mode
#/$ PREVIOUS/NEXT PAGE
a CHECK
Displays the current play index, total track number.
eEXIT
Displays the track list (song list).
Playing an MP3 Disc
1. Insert an MP3 disc into the disc tray.
• The menu is displayed
2. Press the ▲▼ buttons to select Library, then press the OK or ► button.
3. Press the ▲▼ buttons to select Music, then press the OK or ► button.
4. Press the ▲▼ buttons to select the track you want to hear, and then press the OK button.
MP3 Screen Elements
CD
Music List
SONG01.mp3
1/9
No.
Title
Y
►
Q
002
003
004
005
006
00:02:22
9 SONG01.mp3
E ROOT
Edit
Sort
#/$ PREVIOUS/NEXT PAGE
ROOT
SONG01.MP3
SONG02.MP3
SONG03.MP3
SONG04.MP3
SONG05.MP3
SONG06.MP3
Size
3.8 MB
3.8 MB
5.1 MB
9.2 MB
5.2 MB
10.3 MB
Play Mode
Contents
a CHECK
eEXIT
Current track (song) : Displays the name of the track being
played.
Displays available buttons and a playback time
corresponding to a portion that is currently played.
Displays the current file type, file name and folder name.
Displays available buttons.
Displays the current play index, total track number.
Displays the track list (song list).
Repeat CD (CD-DA) & MP3
You can also operate this function by pressing the REPEAT button on the remote control.
During playback, press the REPEAT button repeatedly to select the repeat mode you want.
1. Press the YELLOW(C) button during the Music List playback.
CD
Music List
TRACK01
2. Press the ▲▼ buttons to select desired play mode, then press
No.
Title
the OK or ► button.
Q TRACK01
002 TRACK02
• Normal (CD (CD-DA)/MP3) : Tracks on a disc are played in
003 TRACK03
  ►   00:02:22
004 TRACK04
Normal
the order in which they were recorded on the disc.
TRACK01
005 TRACK05
Repeat Track
006 TRACK06
Repeat All
Repeat Track (CD (CD-DA)/MP3)
•
007 TRACK07
Random
Edit
Play Mode
Repeat Folder (MP3)
•
#/$ PREVIOUS/NEXT PAGE
Repeat All (CD (CD-DA)/MP3)
•
Random (CD (CD-DA)/MP3) : The random option plays a disc’s tracks in random order.
•
CDDA
1/10
Length
4:19
3:57
3:57
4:03
4:09
5:08
3:31
eEXIT
English _59
01587A-SH871M-XEU-ENG.indb 59
2008-04-17 오후 2:01:02
playback
CD Import
1. Press the RED(A) button during the Music List playback.
CD
2. Press the ▲▼ buttons to select CD Import, then press the OK or
► button.
3. Press the ▲▼ buttons to select file you want to copy, then press
the MARKER button until a checkmark appears.
• If you don't want to copy a certain one of the checked entries,
simply select that entry and press MARKER button to deselect
it until a checkmark disappears.
4. Press the ►▲▼ buttons to select the target media, then press the
OK or button.
• You can create a new folder by pressing the GREEN(B) button.
Music List
TRACK01
M
 The format of a mp3 file after imported is as follows:
Bitrate 128kbps
Channel 2(stereo)
Sampling Rate 44KHz
 DTS CDDA and copy protected discs can not be imported.
Title
Q
002
003
004
005
006
007
  ►   00:02:22
CD Import
CDDA TRACK01
New
Playlist
Go To Playlist
Select All
Length
4:19
3:57
3:57
4:03
4:09
5:08
3:31
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
Edit
Play Mode
#/$ PREVIOUS/NEXT PAGE
a CHECK
eEXIT
CD
CD Import
Selected Items:
Available:
Source : DVD
5. Press the RED(A) button to select Start Copy. The message
"Number of file : x" is displayed.
6. Press the ◄ ► buttons to select Start, then press the OK button.
File copy begins.
• To cancel the copying in progress, press the EXIT ( ) button.
1/10
No.
9 CDDA
8 3.64MB
To :
001
002
003
004
005
006
Start Copy
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
E HDD
Sort
#/$ PREVIOUS/NEXT PAGE
Select All
Unselect All
a CHECK
eEXIT
CD
CD Import
Selected Items: 9.68MB (2)
Available : 236724MB
Source : DVD
Copying...
To : HDD
Y ROOT
Free space
236623 MB
001: TRACK01
Number of file : 1 / 2
002: TRACK01.CDA
TRACK02
File Name
003 TRACK03
9 CDDA
004 TRACK04
8 3.84MB
005 TRACK05
Start Copy
Sort
ROOT
33%
Select All
Unselect All
eEXIT
New Playlist
A
You can register a maximum 30 tracks in the playlist.
1. Press the RED(A) button during the Music List playback.
2. Press the ▲▼ buttons to select New Playlist, then press the OK
or ► button.
3. Press the ▲▼ buttons to select tracks in the order in which you
want them to play, then press the OK button.
• If you playlisted a wrong track, press the ►▲▼ buttons to
select the wrong track, then press the OK button.
4. To store the Playlist, press the RED(A) button.
A new Playlist will be created.
CD
No.
001
002
003
004
005
006
007
Make Playlist
Title
No.
001
002
003
004
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
Save
mMOVE
Playlist
TRACK10
TRACK08
TRACK04
TRACK07
Music List
sADD
rRETURN
eEXIT
CD
Playlist
q
U
No.
Y
E
Title
PLAYLIST
PLAYLIST01
Length
  ►   00:00:00
Y PLAYLIST
mMOVE
sSELECT
a CHECK
eEXIT
60_ playback
01587A-SH871M-XEU-ENG.indb 60
2008-04-17 오후 2:01:07
Go To Playlist
A
1. Press the RED(A) button during the Music List playback.
2. Press the ▲▼ buttons to select Go To Playlist, then press the
OK or ► button.
Playlist
U
q
No.
Y
E
Title
PLAYLIST
PLAYLIST01
Length
  ►   00:02:22
Y PLAYLIST
mMOVE
sSELECT
a CHECK
eEXIT
Delete the Playlist
A
1. Press the RED(A) button during the Music List playback.
2. Press the ▲▼ buttons to select Go To Playlist, then press the
OK or ► button.
3. Press the ▲▼ buttons to select the Playlist you want to delete.
4. Press the RED(A) button.
5. Press the ◄ ► buttons to select Yes, then press the OK button.
The selected Playlist is deleted.
M
CD
● PLAYBACK
3. Press the ▲▼ buttons to select the desired playlist folder, then
press the OK button.
The selected tracks are played automatically.
CD
Playlist
U
q
No.
  ►   00:00:00
Delete
1/2
Length
Y Playlist
E Playlist01
Do you want to delete?
E Playlist02
l PLAYLIST01
<MOVE
Title
Yes
Edit Playlist
sSELECT
No
New Playlist
Music List
a CHECK
eEXIT
 When the player turns off or opens a file /disconnects, any playlists in the disc will be deleted.
Go To Edit Playlist
A
1. Press the RED(A) button during the Music List playback.
2. Press the ▲▼ buttons to select Go To Playlist, then press the
OK or ► button.
3. Press the ▲▼ buttons to select the Playlist you want to edit.
4. Press the GREEN(B) button in playlist mode.
5. Press the ▲▼ buttons to select tracks in the order in which you
want them to play, then press the OK button.
• If you playlisted a wrong track, press the ►▲▼ buttons to
select the wrong track, then press the OK button.
CD
No.
001
002
003
004
005
006
007
Edit Playlist
Title
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
Save
mMOVE
No.
001
002
003
004
Playlist
TRACK10
TRACK04
TRACK06
TRACK07
Music List
sADD
rRETURN
eEXIT
6. To store the Playlist, press the RED(A) button.
Playlist will be edited.
English _61
01587A-SH871M-XEU-ENG.indb 61
2008-04-17 오후 2:01:12
playback
Go To Music List
A
1. Press the BLUE(D) button during the Playlist playback.
The Music List will be displayed.
CD
Playlist
U
TRACK04
  ►   00:02:22
TRACK04
k PLAYLIST01
CDDA
No.
Y
R
003
004
005
Title
PLAYLIST01
TRACK04
TRACK02
TRACK06
TRACK01
Edit
1/4
Length
4:03
3:57
5:08
4:19
Play Mode
#/$ PREVIOUS/NEXT PAGE
a CHECK
eEXIT
Using the Sort
A
When you need to change the Sort order of Music List, you can
change it simply.
CD
Music List
SONG 10.mp3
2. Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
• Name : In alphabetical order
• Size : In order of audio file size.
M
1/10
No.
1. While the list menu is displayed, press the GREEN(B) button to
select Sort.
Y
Q
002
003
004
005
006
 ►  00:02:22
9 SONG 10.mp3
E ROOT
Name
Size
Edit
Sort
#/$ PREVIOUS/NEXT PAGE
Title
ROOT
SONG 1.MP3
SONG 2.MP3
SONG 3.MP3
SONG 4.MP3
SONG 5.MP3
SONG 6.MP3
Size
3.8 MB
3.8 MB
5.1 MB
9.2 MB
5.2 MB
10.3 MB
Play Mode
Contents
a CHECK
eEXIT
 Audio CD(CD-DA) is not available.
 You can sort by Name, Length. Sorted list will be resorted in copied order upon reentering Music List.
Select Contents
A
1. Press the BLUE(D) button to select Contents.
2. Press the ▲▼ buttons to select the contents you want to move,
then Press the OK or ► button.
CD
Music List
SONG 10.mp3
1/10
No.
Y
Q
002
003
004
005
006
 ►  00:02:22
M
 This function is possible only when the disc contains the selected
contents.
 Audio CD(CD-DA) is not available.
9 SONG 10.mp3
E ROOT
Edit
Sort
#/$ PREVIOUS/NEXT PAGE
Title
ROOT
SONG 10.MP3
SONG 1.MP3
SONG 2.MP3
SONG 3.MP3
SONG 4.MP3
SONG 5.MP3
Size
3.8 MB
5.8 MB
Title 5.1 MB
DivX 9.2 MB
Music 5.2 MB
Photo 10.3
(with MB
Music)
Play Mode
Contents
a CHECK
eEXIT
62_ playback
01587A-SH871M-XEU-ENG.indb 62
2008-04-17 오후 2:01:14
MUSIC/PHOTO SIMULTANEOUS PLAYBACK
A
You can listen to the music while watching the photo.
1. Press the BLUE(D) button to select Contents.
2. Press the ▲▼ buttons to select the Photo(With Music), then
Press the OK or ► button.
The photo List will be displayed. (See page 63~65.)
CD
Music List
SONG 10.mp3
1/10
No.
Y
M
 To operate this function, you have to select the disc containing both
music files and photo file.
9 SONG 10.mp3
E ROOT
Edit
Sort
#/$ PREVIOUS/NEXT PAGE
Size
3.8 MB
5.8 MB
Title 5.1 MB
DivX 9.2 MB
Music 5.2 MB
10.3Music)
MB
Photo (with
Play Mode
Contents
a CHECK
eEXIT
● PLAYBACK
Q
002
003
004
005
006
 ►  00:02:22
Title
ROOT
SONG 10.MP3
SONG 1.MP3
SONG 2.MP3
SONG 3.MP3
SONG 4.MP3
SONG 5.MP3
VIEWING A PICTURE
G
1. Insert a JPEG disc into the disc tray.
• The menu is displayed
2. Press the ▲▼ buttons to select Library, then press the OK or ►
button.
3. Press the ▲▼ buttons to select Photo, then press the OK or ►
button.
• To see the next 8 pictures, press the SKIP ( ) button.
• To see the previous 8 pictures, press the SKIP ( ) button.
CD
Photo List
1/17
Image 1.jpg
ROOT
Image 1.jpg
Image 13.jpg
Image 14.jpg
Edit
Sort
#/$ PREVIOUS/NEXT PAGE
Image 10.jpg
Image 11.jpg
Image 15.jpg
Image 16.jpg
Slideshow
Contents
a CHECK
eEXIT
4. Press the ▲▼◄ ► buttons to select a desired picture, then press the OK button.
Slide Show
5. Press the PLAY ( )button.
• Once in the Photo List, you can also operate Slide Show in by
pressing the YELLOW(C) button.
Image 1.jpg
1/17
6. Press the RED(A) button to select Speed.
7. Press the ▲▼ buttons to select the Slide Show speed, then press
the OK or ► button.
The Slide Show starts and plays at the selected speed.
• You can go to Photo List by pressing YELLOW(C) button.
❖ To stop the Slide Show
Press the GREEN(B), STOP(
Rotate
>PHOTO
► SLIDESHOW
Zoom
rRETURN
Image 1.jpg
eEXIT
1/17
) or RETURN button.
Fast
Normal
Slow
Speed
>PHOTO
Slide Show Off
Photo List
► SLIDESHOW
rRETURN
eEXIT
English _63
01587A-SH871M-XEU-ENG.indb 63
2008-04-17 오후 2:01:18
playback
Rotate
To setup, follow steps 1 to 4 on page 63.
5-1. Press the GREEN(B) button to select Rotate.
6. Press the ▲▼ buttons to select the rotate angle, then press the
OK or ► button.
• Once you select a rotate angle, you can change it by pressing
the RED(A) button.
• You can go to Photo List by pressing YELLOW(C) button.
1/17
Off
Rotate 90
Rotate 180
Rotate 270
Rotate
❖ To stop the Rotate
Press the GREEN(B), STOP(
Image 1.jpg
>PHOTO
► SLIDESHOW
Rotate
Rotate Off
Zoom
rRETURN
eEXIT
) or RETURN button.
Photo List
rRETURN
eEXIT
Zoom
To setup, follow steps 1 to 4 on page 63.
5-1. Press the YELLOW(C) button to select Zoom.
6. Each time the OK button is pressed, the picture is enlarged up to
4x (four times the normal size).
€ X2 € X4 € X2 € Normal
• You can go to Photo List by pressing YELLOW(C) button.
❖ To stop the Zoom
Press the GREEN(B), STOP(
) or RETURN button.
Go To Photo List
To setup, follow steps 1 to 4 on page 63.
5-1. Press the RETURN button to go to Photo List.
Using the Sort
When you need to change the Sort order of Photo List, you can sort by Name and Size.
To setup, follow steps 1 to 4 on page 63.
1. While the list menu is displayed, press the GREEN(B) button to
select Sort.
2. Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
• Name : In alphabetical order
• Size : In order of photo file size.
CD
Photo List
01/17
Image 1.jpg
ROOT
Image 1.jpg
Image 10.jpg
Image 11.jpg
Image 13.jpg
Name
Size
Image 14.jpg
Image 15.jpg
Image 16.jpg
Edit
Sort
#/$ PREVIOUS/NEXT PAGE
M
Slideshow
Contents
a CHECK
eEXIT
 You can sort by Name, Size. Sorted list will be resorted in copied order upon reentering Photo List.
64_ playback
01587A-SH871M-XEU-ENG.indb 64
2008-04-17 오후 2:01:24
Select Contents
To setup, follow steps 1 to 3 on page 63.
1. Press the BLUE(D) button to select Contents.
CD
2. Press the ▲▼ buttons to select the contents you want to move,
then Press the OK or ► button.
Photo List
1/17
Image 1.jpg
ROOT
Image 1.jpg
Image 13.jpg
Image 14.jpg
Sort
#/$ PREVIOUS/NEXT PAGE
M
Image 11.jpg
Title
DivX
Music
Image 16.jpg
Photo
Image 15.jpg
Slideshow
Contents
a CHECK
eEXIT
● PLAYBACK
Edit
Image 10.jpg
 This function is possible only when the disc contains the selected contents.
PLAYING A DIVX
N Using the MENU button
1. Insert a DivX disc into the disc tray.
• The menu is displayed
CD
DivX List
Movie_01.avi
1/1
No.
2. Press the ▲▼ buttons to select Library, then press the OK or ►
button.
3. Press the ▲▼ buttons to select DivX, then press the OK or ►
button.
Title
Size
ROOT
001 Movie_01.avi
Y
162.8 MB
3 DivX
E ROOT
4. Press the ▲▼ buttons to select the avi file (DivX), then press the
OK or PLAY ( ) button.
Edit
Sort
Subtitle Enc.
Contents
a CHECK
eEXIT
5. When DivX file is played, you can use following functions. Pressing the STOP ( ) button once during
playback will display the file list, pressing the button again will exit the menu screen.
DivX Function Description
Function
Skip Scene
M
Description
During play, press the SKIP (
) buttons, it moves forward or backward 5 minutes.
) buttons and press again to search at a faster speed.
Search Scene
During play, press the SEARCH (
(X 2, X 4, X 8)
Slow Motion
In pause mode ( ), press the SEARCH (
Reverse Slow Motion Play is not available.
Step Motion
In pause mode ( ), press the SKIP ( ) buttons on the remote control.
Reverse Step Motion Play is not available.
) button on the remote control. (1/2, 1/4, 1/8)
 Some DivX files created on a personal computer can not be played back. That is why Codec Type, Version and Higher
resolution over specification are not supported.
English _65
01587A-SH871M-XEU-ENG.indb 65
2008-04-17 오후 2:01:28
playback
DivX Subtitle Encoding
1. Press the YELLOW(C) button in the file list.
2. Press the ▲▼ buttons to select a supported DivX subtitle
language by region, then press the OK button.
CD
DivX List
Movie_01.avi
1/1
No.
Title
ROOT
001 Movie_01.avi
Size
Y
3 DivX
E ROOT
Edit
162.8 MB
Western(Windows)
Central(Windows)
Greek(Windows)
Cyrillic(Windows)
Sort
Subtitle Enc.
Contents
a CHECK
M
eEXIT
Western
Afrikaans, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German, Icelandic,
Indonesian, Italian, Malay, Norwegian, Portuguese, Spanish, Swahili, Swedish
Central
English, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian(Latin), Slovak, Slovenian
Greek
English, Greek
Cyrillic
English, Azeri, Belarusian, Bulgarian, Kazakh, Macedonian, Russian, Serbian, Tatar, Ukrainian, Uzbek
 If the subtitle language is displayed in broken fonts, change DivX Subtitle to the appropriate region. If is still does not
work, the format is not supported.
Using the Sort
When you need to change the Sort order of DivX List, you can change it simply.
1. While the list menu is displayed, press the GREEN(B) button to
select Sort.
2. Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
• Name : In alphabetical order
• Size : In order of DivX file size.
CD
DivX List
Movie_01.avi
1/3
No.
Title
Size
ROOT
001 Movie_01.avi
002 Movie_02.avi
003 Movie_03.avi
Y
3 DivX
E ROOT
Edit
162.8 MB
238.2 MB
118.4 MB
Name
Size
Sort
Subtitle Enc.
Contents
a CHECK
M
eEXIT
 You can sort by Name, Size. Sorted list will be resorted in copied order
upon reentering DivX List.
Select Contents
1. Press the BLUE(D) button to select Contents.
2. Press the ▲▼ buttons to select the contents you want to move,
then press the OK or ► button.
CD
DivX List
Movie_01.avi
1/1
No.
Title
ROOT
001 Movie_01.avi
Size
Y
3 DivX
E ROOT
Edit
162.8 MB
Title
DivX
Music
Photo
Sort
Subtitle Enc.
a CHECK
M
Contents
eEXIT
 This function is possible only when the disc contains the selected contents.
66_ playback
01587A-SH871M-XEU-ENG.indb 66
2008-04-17 오후 2:01:32
recording
This section shows various HDD&DVD Recording methods.
This unit can record on various types of discs. Before recording, read the following
instructions and select the disc type according to your preference.
● RECORDING
RECORDABLE DISCS
This HDD & DVD Recorder can record on the following discs.
HDD
DVD-RAM
DVD-RW
DVD-R
DVD+RW
DVD+R
• DVD-RAMs and DVD±RWs are rewritable.
• DVD±Rs are non-rewritable.
Compatibility between Samsung and Other Company’s Recorder
Disc Types
Recording
format
Recording Device
Finalising
Additional Recording
in Samsung Recorder
DVD-RAM
VR Mode
Samsung
Other Company
X
X
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
X
X
finalised
not finalised
finalised
not finalised
Recordable
Recordable
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Not recordable
Not recordable
Recordable
Not recordable
Not recordable
Not recordable in some cases
Not recordable in some cases
Not recordable
Not recordable in some cases
Not recordable
Not recordable in some cases
Samsung
VR Mode
Other Company
DVD-RW
Samsung
V Mode
Other Company
Samsung
DVD-R
V Mode
Other Company
DVD+RW
-
DVD+R
-
Samsung
Other Company
Samsung
Other Company
English _67
01587A-SH871M-XEU-ENG.indb 67
2008-04-17 오후 2:01:36
recording
M
 Finalise
- This closes the DVD-RW/±R so no additional recording can be done.
 Unfinalise
- This allows additional recording on a DVD-RW disc originally recorded on the HDD & DVD Recorder.
- A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalised.
- A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised.
- A DVD±R disc cannot be unfinalised.
 An additional recording could be failed in the same recorder of SAMSUNG.
RECORDING FORMATS
When you insert an unused disc, the following message appears. Since available functions differ depending on the
disc type, select a disc that best fits your preferences.
DVD-RAM/+R : Formatting will be started automatically.
DVD+RW : Use after formatting the disc.
DVD-RW : Use after initialising the disc.
If you want to change the VR or V mode, refer to Formatting a Disc on pages 99~100.
DVD-R : Formatting disc is unnecessary and only V Mode Recording is supported.
DVD-RAM/-RW(VR mode)
• This mode allows multiple editing functions (such as deletion of the whole title, partial deletion of a title, etc.).
• Various editing options using a created Playlist.
DVD-RW(V mode)/-R
• Chapters will be created automatically when you finalise recording on DVD-RW/-R discs in V mode.
The chapter’s length (interval between chapters) varies according to the recording mode.
• Simple editing (erasing titles/changing title name).
DVD+RW
• With DVD+RW discs, there is no difference between DVD-Video format(Video mode) and DVD-Video
Recording format(VR mode).
68_ recording
01587A-SH871M-XEU-ENG.indb 68
2008-04-17 오후 2:01:37
RECORDING MODE
Select one of four recording modes by pressing the REC MODE button repeatedly while the unit is in Stop mode for
the desired recording time and picture quality. In general, picture quality improves as the recording time decreases.
In FR mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and
length of the timer recording. This function is selected only one mode in XP, SP, LP and EP modes and you can use
this mode for timer recording.
• DVD-SH871M
DVD-RAM/±RW/±R
XP
(high quality mode)
Approx. 33 hours
Approx. 1 hour
about 8.5 Mbps
SP
(standard quality mode)
Approx. 67 hours
Approx. 2 hours
about 4.5 Mbps
LP
(long recording mode)
Approx. 133 hours
Approx. 4 hours
about 2 Mbps
EP
(extended mode)
FR
(Flexible Recording)
M
Recording Times
HDD (160GB)
Approx. 199 hours
Approx. 264 hours
Approx. 33 hours ~ 264 hours
● RECORDING
Recording Mode
Approx. 6 hours/
about 1.6 Mbps
Approx. 8 hours/
about 1.2 Mbps
Approx. 1~8 hours
 Recording time may vary according to specific conditions.
 1GB = 1,000,000,000 bytes; actual formatted capacity may be less as the internal firmware uses a portion of the
memory.
 The dual layer DVD±Rs have approximately double the capacity of single layer DVD±Rs. (See pages 50~51)
 DVB-T recording is possible only on FR mode.
 On DVB-T recording, recording mode will be automatically determined depending on the quality of the video (or
audio).
English _69
01587A-SH871M-XEU-ENG.indb 69
2008-04-17 오후 2:01:38
recording
UNRECORDABLE PICTURES
Video with copy protection cannot be recorded on this HDD & DVD Recorder.
When the HDD & DVD Recorder receives a copy- guard signal while recording, recording stops and the following
message appears on the screen.
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free,
Copy-Once and Copy-Never. If you want to record a copy-once type programme, use DVD-RW with CPRM
in VR Mode, DVD-RAM and HDD.
Signal type
Copy-Free
Copy-Once
Copy-Never
O
-
-
VR mode
O
O*
V mode
O
Media
DVD-RW (Ver.1.1)
DVD-RW(Ver.1.1)
with CPRM
-
DVD-R
O
DVD-RAM (Ver.2.0)
O
O*
-
DVD+RW
O
-
-
DVD+R
O
-
-
HDD
O
O*
-
Once “Copy Once” has been recorded, recording cannot be done anymore.
❖ Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some
HDD & DVD Recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media
ID etched in the BCA. When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2
(Cryptomeria) cipher derived from the media ID.
During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc.
If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be
decryptable.
70_ recording
01587A-SH871M-XEU-ENG.indb 70
2008-04-17 오후 2:01:38
RECORDING IMMEDIATELY
SXCVKL
Before you start
1. Check that the disc has enough available space for the recording.
Recording the current TV programme you are watching
) or number buttons to select the current
1. Press the PROG (
programme you want to record.
Record Mode
SP(35:12)
● RECORDING
2. Press the HDD or DVD button.
If you select DVD, Press the OPEN/CLOSE button and place a recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
2. Press the REC MODE button repeatedly, (or press the REC
MODE button and then press the ▲▼ buttons) to select the
recording speed(quality).
€ SP € LP € EP € XP
3. Press the REC button.
Information concerning the channel is displayed on the screen,
then recording begins.
Icon( REC) is displayed on the front panel.
HDD
● Recording:
PR 1 [SP]
Recording from external equipment you are watching
1. Press the INPUT SEL. button to select the input source according to the connection you made.
The front panel display changes in the following sequence:
€ PR Number € AV1 € AV2 € AV3 € DV
If you connect a digital camcorder, press the INPUT SEL. button to select DV. (See page 72)
2. Press the REC MODE button repeatedly, (or press the REC MODE button, then press the ▲▼ buttons)
to select the recording speed (quality).
3. Press the REC button.
Information concerning the external input mode is displayed on the screen, then recording begins.
Icon( REC) is displayed on the front panel.
To pause recording
• Press the REC PAUSE button to pause a recording in progress.
• Press the REC PAUSE button again during pause to resume recording.
) buttons while recording pauses. (Analogue
• You can switch channels by pressing the PROG (
broadcasting only)
• If you select DV mode during rec pause, recording will be stopped.
If you change the input source during rec pause in DV mode , recording will be stopped.
M
 In DTV mode, if you press the REC PAUSE button:
- The channel will not be switched and the TV/RADIO key is disabled.
- Switching to the analog channel or changing the input source will be applied after the recording is stopped.
 In ANALOG mode, if you press the REC PAUSE button:
- Switching to DTV mode will be applied after the recording is stopped.
English _71
01587A-SH871M-XEU-ENG.indb 71
2008-04-17 오후 2:01:39
recording
To stop recording
Press the STOP ( ) button to stop or finish a recording in progress.
• When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a
moment” is displayed.
M





You can not change the recording mode while recording.
Recording will stop automatically if there is no free space left for recording.
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc.
Up to 999 titles can be registered on the HDD.
HDD recording is available for up to 24 hours, and when recording for 24 hours, 3 titles will be recorded with each
being 8 hours in length.
 Recording will stop automatically if a copy protected image is selected.
 DVD-RAM/±RW discs must be formatted before starting to record. Most new discs are sold unformatted.
 Do not use DVD-R authoring discs with this unit.
COPYING FROM A CAMCORDER
SXCVKL
You may control the Camcorder using the IEEE1394 (DV) interface.
1. Connect the DV output jack of your camcorder to the DV input
jack on the front of your HDD & DVD Recorder using a DV cable.
Record Mode
SP(35:12)
2. Press the HDD or DVD button.
If you select DVD, press the OPEN/CLOSE button and place a
recordable disc on the disc tray. Press the OPEN/CLOSE button
to close the disc tray. Wait until LOAD disappears from the front
panel display.
3. Press the REC MODE button repeatedly to select the recording
speed(quality).
4. Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that enables
camcorder control appears on the top of the screen.
DV
5. Select the Play (►) icon on the upper part of the screen to
playback the camcorder and find the starting position to copy.
6. To start recording, use the ◄ ► buttons to select Record () icon
in the top side of the screen, then press the OK button.
You can press the REC button on the remote control to start
recording.
The DV device is connected.
< MOVE
rRETURN
To stop recording
Press the STOP ( ) button to stop or finish a recording in progress.
• When using DVD-RAM/±RW/±R discs, the message “Updating the information of disc. Please wait for a
moment” is displayed.
M
 To display playback related icons on the screen, press any direction button on the remote control.
72_ recording
01587A-SH871M-XEU-ENG.indb 72
2008-04-17 오후 2:01:41
MAKING A ONE TOUCH RECORDING (OTR)
SXCVKL
You can set the HDD & DVD Recorder to record in 30-minute increments up to 8 hours by pressing the REC button.
HDD
● Recording:
PR 1 [SP]
● RECORDING
1. Press the HDD or DVD button.
If you select DVD, press the OPEN/CLOSE button and place a
recordable disc on the disc tray. Press the OPEN/CLOSE button
to close the disc tray. Wait until LOAD disappears from the front
panel display.
2. Press the PROG (
) or number buttons to select the
programme to record.
3. Press the REC button to start recording.
4. Press the REC button repeatedly to adjust the desired recording
time.
€ 0:30 € 1:00 € ... 8:00 € Off
M
OTR Mode
0:30
 The timer counter decreases by the minute from 8:00 to 0:00, then
the HDD & DVD Recorder stops recording.
To stop recording
Press the STOP ( ) button. The message “Do you want to stop recording?” is displayed.
• Press the ◄ ► buttons to select Yes, then press the OK button.
• Or press the STOP ( ) button again.
SIMULTANEOUS RECORDING AND PLAYBACK
S
You can play back from the beginning of the programme you are currently recording.
You can watching the previous title list while recording a programme.
Using the PLAY (
) button
1. With the unit in recording mode, press the PLAY ( ) button.
It plays back the title that you are currently recording from the
beginning.
Playback is not available for 10 seconds from the start of
recording.
You can use the SKIP (
) and other playback-related buttons
to view the previous recorded list.
HDD
► Play
English _73
01587A-SH871M-XEU-ENG.indb 73
2008-04-17 오후 2:01:42
recording
Stopping Playback / Recording
1. Press the STOP (
) button. Playback screen disappears and the recording in progress screen appears.
2. Pressing the STOP (
) button once more will stop the recording.
N Using the TITLE LIST button
1. With the unit in recording mode, press the TITLE LIST button.
The above operation is possible from approx.10 seconds or more
after recording starts.
Press the ▲▼/SKIP (
) buttons to select the recording title
list.
2. Press the OK or PLAY ( ) button.
It plays back the title that you are currently recording from the
beginning.
Title List
HDD
RECORDING...
4/4
No.
001
002
003
004
3 MPEG2
Title
JAN/01/2008 17:30 PR
JAN/01/2008 21:00 PR
JAN/01/2008 23:15 PR
RECORDING...
Length
01:00:00
01:00:00
00:30:00
00:00:00
4 JAN/02/2008 00:00
1 XP
eEXIT
N Using the MENU button
1. With the unit in recording mode, press the MENU button.
2. Press the ▲▼ buttons to select Title, then press the OK button.
Title List screen is displayed.
3. Press the ▲▼/SKIP (
) buttons to select the recording title list, then press the OK or ► button.
It plays back the title that you are currently recording from the beginning.
Stopping Playback / Recording
1. Press the STOP (
) button once, playback screen disappears and the Title List screen appears.
2. Pressing the MENU (
) button again, the recording in progress screen appears.
3. Pressing the STOP (
) button once more will stop the recording.
M
 No sound is heard during search mode.
 DVD disc or HDD playback is available during HDD recording. However, JPEG, MP3, and DivX files in the disc cannot
be played back.
 HDD playback is available during DVD recording. However, JPEG and MP3 files in the HDD cannot be played back.
TIME SHIFT FUNCTION AS A LIVE SIGNAL
S
This function replays recordings as a live signal.
If you are interrupted while watching a TV programme, simply press the
TIME SHIFT button, and the HDD & DVD Recorder immediately starts
recording the programme.
Time Shift
>CHANGE
On
sSELECT
74_ recording
01587A-SH871M-XEU-ENG.indb 74
2008-04-17 오후 2:01:44
Using the Time Shift function
1. Press the TIME SHIFT button on the remote control.
The Time Shift menu is displayed.
2. Press the ▲▼ button to select On, then press the OK button.
3. While watching the currently broadcasting programme, press the PAUSE ( ) button.
The programme on TV is set in pause mode and the Time Shift Bar is displayed.
4. Press the PLAY(
) button to resume watching the programme.
● RECORDING
Time Shift Screen Elements
Displays the current media.
Displays the current status.
Watching Point.
13:25:04
►
HDD
14:02:28
Play
Current play time.
Live Point.
Live Time.
Time Shift Time Bar
Buttons on the Remote Control used for Time Shift function
1. PLAY (
) button : Playback.
2. PAUSE (
) button : Pause live TV.
3. SEARCH (
) buttons : Fast play ( X 2, X 4, X 8, X 16, X 32, X 128)
4. SKIP (
) button, STOP (
5. SKIP (
) button : Returns to the point where Time Shift begins.
M
) button : Switches to live TV.
 The Time Shift is available only when HDD mode is selected.
 You can use this function for up to maximum two hours.
 You can only play the contents by using the menu when the Time Shift is set to On.
 Press TIME SHIFT button to cancel the Time shift function.
English _75
01587A-SH871M-XEU-ENG.indb 75
2008-04-17 오후 2:01:47
recording
MAKING A TIMER RECORDING
SXCVKL
1. Check if the antenna cable is connected.
2. Check if the remaining time of the disc.
3. Check if the date and time are correct.
Make sure the Clock (Setup-Clock Set) is set before you proceed with a timer recording. (See pages 33~34)
N Using the TIMER button
1. With the unit in Stop mode, press the TIMER button.
2. Press the ▲▼ button to select the Scheduled List, then press
the OK or ► button.
HDD & DVD RECORDER
Library
Guide
3. Press the OK button to select Add a list.
4. Set timer recording option.
• Fill the input items using the ▲▼◄ ► buttons and number
buttons.
• ◄ ► : Moves to the previous/next item.
▲▼, 0~9 : Sets a value.
• To : Select the media to record HDD or DVD.
• Source : The video input source (AV1, AV2 or AV3), or the
broadcasting channel you want to make a timer recording from.
To convert DTV/Analogue, press DTV/ANALOG button of the
remote control.
On the DTV mode, you can change TV or RADIO by pressing
the TV/RADIO button on the remote control.
• Date : Timer Recording allows setting the recording time within
one month period. Set the recording day. (month/day)
Timer Record
HDD
Channel
Video Plus+
►
Scheduled List
►
Video Plus+ Extended : Off
►
Recorded List
►
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
HDD
Scheduled List
Current Time 10:54
No.
To
Source Date
Start
End
Mode
PDC
Add a list
Recordable Time HDD 69:30 SP
Recorded List
sSELECT
rRETURN
eEXIT
HDD
Scheduled List
Current Time 10:54
No.
JAN 31
Every SUN
JAN 30
JAN 29
Every SAT
MON-FRI
JAN 02
MON-SAT
JAN 01
Every Day
To
Source Date
Start
End
Mode
PDC
No.01 No Title
To
Source
Date
Start
End
HDD
AV 1
JAN 01
12:00
14:00
Recordable Time HDD 69:30 SP
Mode
PDC
SP
Off
Title sSave
Recordable Time HDD 69:30 SP
< MOVE
sSELECT
Recorded List
rRETURN
eEXIT
• Start/End Time : Start and end time of the timer recording.
• Mode (Recording Mode) :
- FR (Flexible Recording) : Select when you want to set video quality automatically. In FR mode, the most
suitable record mode is adjusted automatically, according to the remaining time on the disc and length of
the timer recording. This function is selected only one mode in XP, SP, LP and EP modes.
- XP (high quality) : Select when video quality is important.
- SP (standard quality) : Select to record in standard quality.
- LP (low quality) : Select when a long recording time is required.
- EP (extended) : Select when a longer recording time is required.
76_ recording
01587A-SH871M-XEU-ENG.indb 76
2008-04-17 오후 2:01:49
M
 DVB-T Timer recording is possible only on FR mode.
 On DVB-T recording, recording mode will be automatically determined depending on the quality of the video
(or audio).
 If you select the number of scheduled list which has been set the series recording, 'series recording on' will be
displayed above the button display.
● RECORDING
• PDC : PDC (Programme Delivery Control) function.
- If you set this function on, you can control the starting and ending time of recording by special
signal included in the broadcasting signal. If a TV programme is shortened or starts earlier or later
than scheduled, this function synchronizes the starting and ending time of recording with the actual
broadcasting time automatically.
- Set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer
recording will not operate.
- Do not select PDC unless you are sure the programme you wish to record is broadcast with PDC.
• TITLE : To label the title name, press the RED(A) button.
Title renaming screen appears.
Follow steps 4 and 5 of “Renaming (Labeling) a Title” on pages 82~83.
5. After selecting the set up value for each mode, press the OK button to select Save.
•
will appear on the front panel. It means that a timer recording is registered.
If the timer settings overlap;
The programmes are recorded in order of priority. After recording of the first programme is complete, the
second programme starts being recorded.
To exit without saving the current setting
Press the EXIT ( ) button.
To return to the previous menu
Press the RETURN button if you don’t want to set a timer recording.
6. Turn the power off to finish the Timer Recording setting.
Timer Recording will not work when the power is on.
M
 The timer recording time may differ from the set time depending on disc status and overall timer recording status
(for example, recording times overlapping, or when the previous recording ends within 2 minutes before the start
time of the next recording.)
 You can set up to 12 Timer Recordings.
 If HDD disk has no available recording space,
blinks. It means that HDD disk has no space to record.
 If you have set the Timer Recording using PDC, the fan can still operate and make a noise when the power is off.
English _77
01587A-SH871M-XEU-ENG.indb 77
2008-04-17 오후 2:01:52
recording
Editing the Scheduled List
Follow these directions to edit the Scheduled List.
N Using the TIMER button
1. With the unit in Stop mode, press the TIMER button.
HDD & DVD RECORDER
2. Press the ▲▼ button to select the Scheduled List, then press
the OK or ► button.
3. Press the ▲▼ buttons to select the number of the Scheduled
List you want to edit, then press the OK button.
• Edit the items you want to modify. See the “Making a Timer
Recording” section for more information on Timer Recording
Input items. (See pages 76~77)
Timer Record
HDD
Library
Guide
Channel
Video Plus+
►
Scheduled List
►
Video Plus+ Extended : Off
►
Recorded List
►
Timer Record
Disc Manager
Setup
m MOVE
sSELECT
rRETURN
eEXIT
4. Press the OK button to confirm the edited setting.
5. Press the EXIT ( ) button after finishing the operation.
The Scheduled List screen will disappear.
Adding a Scheduled List
Follow these directions to add an entry from the Scheduled List.
N Using the TIMER button
1. With the unit in Stop mode, press the TIMER button.
2. Press the ▲▼ button to select the Scheduled List, then press
the OK or ► button.
3. Press the ▲▼ buttons to select the number of the Scheduled
List, then press the RED(A) button.
• Set the items you want to add. See the “Making a Timer
Recording” section for more information on Timer Recording
Input items. (See pages 76~77)
4. Press the OK button to confirm the added setting.
5. Press the EXIT ( ) button after finishing the operation.
The Scheduled List screen will disappear.
HDD
Scheduled List
Current Time 10:54
No. To
---01 HDD
02 HDD
03 HDD
Source
---PR 01
PR 01
PR 01
Date
-- -JAN 01
JAN 01
JAN 01
Start
- -:- 17:30
21:00
23:15
End
- -:- 18:30
22:00
23:45
Mode
-SP
SP
SP
Recordable Time HDD 65:19 XP
Add
Delete
Recorded List
> MOVE
rRETURN
sSELECT
PDC
-On
On
On
eEXIT
HDD
Scheduled List
Current Time 10:54
No.
To
Source Date
Start
End
Mode
PDC
No.01 No Title
To
Source
Date
Start
End
HDD
PR 01
JAN 01
17:30
18:30
Mode
PDC
SP
On
Title sSave
Recordable Time HDD 108:14 SP
Recordable Time HDD 65:19 XP
Add
Delete
Recorded List
< MOVE
rRETURN
sSELECT
eEXIT
HDD
Scheduled List
Current Time 10:54
No.
-01
02
03
04
To
--HDD
HDD
HDD
HDD
Source
---PR 01
PR 01
PR 01
PR 01
Date
-- -JAN 01
JAN 01
JAN 01
JAN 02
Start
- -:- 17:30
21:00
23:15
17:30
End
- -:- 18:30
22:00
23:45
18:30
Recordable Time HDD 65:19 XP
Add
Delete
Recorded List
> MOVE
rRETURN
sSELECT
Mode
-SP
SP
SP
SP
PDC
-On
On
On
On
eEXIT
78_ recording
01587A-SH871M-XEU-ENG.indb 78
2008-04-17 오후 2:01:53
Deleting a Scheduled List
SXCVKL
Follow these directions to delete an entry from the Scheduled List.
N Using the TIMER button
1. With the unit in Stop mode, press the TIMER button.
3. Press the ▲▼ buttons to select the number of the Scheduled List you want to delete, and then press the
GREEN(B) button.
• You will be prompted with the delete confirm message such as “Do you want to delete?”.
4. Press the ◄ ► buttons to select Yes, then press the OK button.
• The selected entry will be deleted from the list.
● RECORDING
2. Press the ▲▼ button to select the Scheduled List, then press the OK or ► button.
5. Press the EXIT ( ) button after finishing the operation.
The Scheduled List screen will disappear.
USING THE VIDEO PLUS+ FEATURE
SXCVKL
Before presetting your HDD & DVD Recorder.
• Switch on both the television and your HDD & DVD Recorder.
• Check that the date and time are correct.
Up to twelve programmes can be preset.
1. With the unit in Stop mode, press the TIMER button.
2. Press the ▲▼ buttons to select Video Plus+, then press the OK
or ► button.
• A message is displayed to allow you to enter the Video Plus+ code.
3. Press the number buttons to enter the code of the programme
that you want to record in your television magazine.
• If you want to correct the Video Plus+ code that you are entering:
HDD & DVD RECORDER
Video Plus+
HDD
Library
Guide
Enter Video Plus+ Code number. [0-9]
Channel
Timer Record
(Press [OK] button : Make Code)
Disc Manager
Setup
sSELECT
0-9 NUMBER
rRETURN
eEXIT
- Press the ◄ button until the digit to be corrected is cleared.
- Enter the correct digit.
HDD
Scheduled List
Current Time 10:54
4. Press the OK button.
• The information concerning the programme is displayed.
• When using the Video Plus+ function for the first time with
stored stations, the programme number flashes. This one time,
you must enter the PR number manually by pressing the ▲▼
buttons.
No.
To
Source Date
Start
End
Mode
PDC
No.01 No Title
To
Source
Date
Start
End
HDD
––
JAN 01
10:54
12:54
Recordable Time HDD 108:14 SP
Mode
PDC
SP
Off
Title sSave
Recordable Time HDD 65:19 XP
Recorded List
< MOVE
sSELECT
rRETURN
eEXIT
5. Press the RED(A) button if you do not want to use the default
title name.
The rename screen is displayed.
Follow steps 4 and 5 of “Renaming (Labeling) a Title” on pages 82~83.
6. If the programme and times are correct, press the OK button.
7. Turn the power off by pressing the STANDBY/ON button to activate the timer recording setting.
English _79
01587A-SH871M-XEU-ENG.indb 79
2008-04-17 오후 2:01:56
recording
• Refer to pages 76~77 if you want to
- Check whether the timer Recording has set correctly or not.
- Cancel a preset recording.
M
 The numbers next to each TV programme listing in the magazines or newspapers are Video Plus+ code numbers,
which allow you to programme your HDD & DVD Recorder. instantly with the remote control. Enter the Video Plus+
code for the programme you wish to record.
 Video Plus+ is a trademark of Gemstar Development Corporation. The Video Plus+ system is manufactured under
licence from Gemstar Development Corporation.
VIDEO PLUS+ EXTENDED
To prevent delays or overruns, the HDD & DVD Recorder has a function called Video Plus+ Extended allowing you
to extend the recording time by up to 60 minutes.
• Only use if PDC is not available or set to OFF.
1. With the unit in Stop mode, press the TIMER button.
2. Press the ▲▼ buttons to select Video Plus+ Extended, then
press the OK or ► button.
3. Press the ▲▼ buttons to select the Video Plus+ Extended time,
then the press OK or ► button.
4. Press the EXIT (
) button to exit the menu.
HDD & DVD RECORDER
Timer Record
HDD
Library
Guide
Channel
Timer Record
Disc Manager
Setup
m MOVE
Video Plus+
►
Scheduled List
►
Off
Video Plus+ Extended :10
Off
20
Recorded List
30
40
50
60
sSELECT
►
►
rRETURN
eEXIT
GO TO RECORDED LIST
SXCVKL
You can confirm the performance results of title lists that have passed the reserved recording time.
N Using the TIMER button
1. With the unit in Stop mode, press the TIMER button.
2. Press the ▲▼ button to select Recorded List, then press the OK
or ► button.
3. Press the EXIT ( ) button after finishing the operation.
The Recorded List screen will disappear.
Recorded List
HDD
No. To Source
Date Start
End
01 HDD PR 01 JAN 01 17:30 18:30
02 HDD PR 01 JAN 01 21:00 22:00
03 HDD PR 01 JAN 01 23:15 23:45
Delete
> MOVE
Delete All
sSELECT
Mode
SP
SP
SP
PDC
On
On
On
Status
OK
OK
OK
Scheduled List
rRETURN
eEXIT
80_ recording
01587A-SH871M-XEU-ENG.indb 80
2008-04-17 오후 2:01:59
Information about Recorded List
Informs whether the selected Recorded List performed a Timer
Recording successfully.
To setup, follow steps 1 to 2 on Page 80.
3-1. Press the ▲▼ buttons to select the number of the
Recorded List, then press the OK button.
HDD
Recorded List
No. To Source
Date Start
End
Mode PDC
01 HDD PR 01 JAN 01 17:30 18:30
SP
On
02 HDD PR 01 JAN 01 21:00 22:00
SP
On
03 HDD PR
01 JAN
01 23:15
23:45
SP
On
Timer
rec was
finished
successfully
Status
OK
OK
OK
OK
Delete
Delete All
Scheduled List
rRETURN
eEXIT
Delete Recorded List
Deletes a Recorded List individually.
To setup, follow steps 1 to 2 on Page 80.
3-1. Press the ▲▼ buttons to select the number of the Recorded
List you want to delete, and then press the RED(A) button.
Recorded List
HDD
No. To Source
Date Start
End
Mode
01 HDD PR 01 JAN 01 17:30
SP
No.01 18:30
02 HDD PR 01 JAN 01 21:00 22:00
SP
03 HDD PR 01 JAN
01 want
23:15 to23:45
Do you
delete?SP
4. Press the ◄ ► buttons to select Yes, then press the OK
button.
Yes
PDC
On
On
On
● RECORDING
sSELECT
Status
OK
OK
OK
No
Delete
Delete All
m MOVE
sSELECT
Scheduled List
rRETURN
eEXIT
Clear Recorded List
Clears all Recorded List at once.
To setup, follow steps 1 to 2 on Page 80.
3-1. Press the GREEN(B) button.
4. Press the ◄ ► buttons to select Yes, then press the OK
button.
Recorded List
HDD
No. To Source
Date Start
End
Mode
PDC
01 HDD PR 01 JAN 01 17:30 18:30
SP
On
02 HDD PR 01 JAN 01 21:00 22:00
SP
On
03 HDD Do
PRyou
01 want
JAN 01to delete
23:15 a23:45
SP list??
On
recorded
Yes
Status
OK
OK
OK
No
Delete
Delete All
m MOVE
sSELECT
Scheduled List
rRETURN
eEXIT
Go to Scheduled List
Switches directly from the Recorded List to the Scheduled List.
HDD
Scheduled List
To setup, follow steps 1 to 2 on Page 80.
3-1. Press the YELLOW(C) button.
Current Time 10:54
No.
To
Source Date
Start
End
Mode
PDC
Add a list
Recordable Time HDD 105:44 SP
sSELECT
Recorded List
rRETURN
eEXIT
English _81
01587A-SH871M-XEU-ENG.indb 81
2008-04-17 오후 2:02:02
editing
This section introduces basic functions of editing and explains both edit functions
for the recording on a disc and edit functions for the entire disc.
Recording or editing might not be completed if an error, such as a sudden power
failure occurs. Please be aware that material that has been damaged is unable to
be restored to its original state.
BASIC EDITING (TITLE LIST)
Playing the Title
SXCVKL
Follow these instructions to play back a scene from the Title List.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
2. Press the ▲▼ buttons to select an entry you want to play from
Title List, then press the OK or PLAY ( ) button.
The selected entry (title) will be played back.
3. To stop title play, press the STOP( ) button.
The screen returns to the Title List screen.
Title List
HDD
JAN/01/2008 17:30 PR1
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Length
01:00:00
01:00:00
00:30:00
3 MPEG2
4 JAN/01/2008 17:30
1 SP
V-Mode Compatibility
Edit
Sort
Go to
Contents
a CHECK
eEXIT
Renaming (Labeling) a Title
SXCVKL
Follow these instructions to rename a title list entry, i.e., to edit the title of a recorded programme.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
4. Select the desired characters using the ▲▼◄ ► buttons, press
the OK button.
• Back Space (RED(A) button) : Deletes and moves the cursor
backwards by one position.
• Space (GREEN(B) button) : Enters a blank and moves the
cursor one forward (to the right).
• Clear (YELLOW(C) button) : Deletes all the character inputs.
• Save (BLUE(D) button) : Registers the character inputs.
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
2. Press the ▲▼ buttons to select an entry you want to rename
from the Title List, then press the RED(A) button.
3. Press the ▲▼ buttons to select Rename, then press the OK or
► button.
The Rename screen is displayed.
Title List
HDD
JAN/01/2008 17:30 PR1
Length
01:00:00
01:00:00
00:30:00
3 MPEG2
4 JAN/01/2008 17:30
1 SP
V-Mode Compatibility
Edit
Sort
Go to
Contents
a CHECK
eEXIT
Title List
HDD
JAN/01/2008 17:30 PR1
Delete
Copy
Rename
Protection
Partial Delete
3 MPEG2
Split
4 JAN/01/2008 17:30
New
1 SPPlaylist
Select
All
V-Mode Compatibility
Edit
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Sort
Length
01:00:00
01:00:00
00:30:00
Go to
Contents
a CHECK
eEXIT
82_ editing
01587A-SH871M-XEU-ENG.indb 82
2008-04-17 오후 2:02:04
5. Press the BLUE(D) button to select Save.
The changed title name is displayed on the title item of the
selected entry.
Rename
HDD
Sports(A1)
Back Space
m MOVE
Space
sSELECT
Clear
Save
rRETURN
eEXIT
SXCVKL
● EDITING
Locking (Protecting) a Title
Follow these instructions to lock an entry to protect it from accidental edition.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
2. Press the ▲▼ buttons to select an entry you want to protect
from the Title List, then press the MARKER button until a
checkmark appears. Repeat this step to select an additional title
you want to protect.
• If you don’t want to protect a certain one of the checked
entries, simply select that entry and press the MARKER to
deselect it until a checkmark disappears.
3. Press the RED(A) button to select Edit. Edit menu is displayed.
4. Press the ▲▼ buttons to select Protection, then press the OK or
► button.
5. Press the ◄ ► buttons to select On, then press the OK button.
The key icon on the information window for the selected entry
changes to the locked status. (1Œ0)
6. If you want to cancel the Protection, select Off in step 5 and press
the OK button. The key icon changes to the unlocked status.
(0Œ1)
M
Title List
HDD
JAN/02/2008 21:00 PR1
Delete
Copy
Protection
3 MPEG2
New
Playlist 17:30
4 JAN/01/2008
Select
1 SP All
V-Mode Compatibility
Unselect
All
Edit
2/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Sort
Length
01:00:00
01:00:00
00:30:00
Go to
Contents
a CHECK
eEXIT
Title List
HDD
JAN/02/2008 21:00 PR1
2/3
No.
Title
Protection
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
2 items are selected
003 JAN/03/2008 23:15 PR
Set title Protection mode:
Length
01:00:00
01:00:00
00:30:00
3 MPEG2
4 JAN/01/2008 17:30
1 SP
On
Off
V-Mode Compatibility
Edit
< MOVE
Sort
sSELECT
Go to
Contents
a CHECK
eEXIT
 If you select “Select All” in the Edit menu, all titles will be checked.
English _83
01587A-SH871M-XEU-ENG.indb 83
2008-04-17 오후 2:02:08
editing
Deleting a Title
SXCVKL
Follow these instructions to delete an entry from the Title List.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
2. Press the ▲▼ buttons to select an entry you want to delete in
the Title List, then press the MARKER button until a checkmark
appears. Repeat this step to select an additional title you want to
delete.
• If you don’t want to delete a certain one of the checked
entries, simply select that entry and press the MARKER to
deselect it until a checkmark disappears.
3. Press the RED(A) button to select Edit.
Edit menu is displayed.
Title List
HDD
JAN/02/2008 21:00 PR1
Delete
Copy
Protection
3 MPEG2
New
Playlist 17:30
4 JAN/01/2008
Select
1 SP All
V-Mode Compatibility
Unselect
All
Edit
2/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Sort
Length
01:00:00
01:00:00
00:30:00
Go to
Contents
a CHECK
eEXIT
Title List
HDD
JAN/02/2008 21:00 PR1
2/3
No.
Title
001 JAN/01/2008 17:30 PR
2 items002
areJAN/02/2008
selected 21:00 PR
Do you 003
wantJAN/03/2008
to delete?23:15 PR
(Related playlists may be deleted.)
4. Press the ▲▼ buttons to select Delete, then press the OK or ►
button.
Yes
• The message may be different depending on the type of disc.
You will be prompted with the confirmation message.
Edit
Sort
HDD, DVD-RAM(VR mode), DVD-RW(VR mode) : The message < MOVE
sSELECT
“Do you want to delete? (Related playlists may be deleted.)” is
displayed.
DVD-RW(V mode)/±RW/±R : The message “Do you want to delete?” is displayed.
Length
01:00:00
01:00:00
00:30:00
3 MPEG2
4 JAN/01/2008 17:30
1 SP
No
V-Mode Compatibility
Go to
Contents
a CHECK
eEXIT
5. Press the ◄ ► buttons to select Yes, then press the OK button.
M
 You cannot delete a protected entry. If you want to delete a protected entry, select “Off” in the Title Protection menu.
(See page 83)
 When the Disc Protection has been set to Protected, you cannot delete titles. (See page 98)
 Once an entry is deleted from the Title List it cannot be recovered.
 Once DVD-RW/±R is finalised, it cannot be deleted.
 With DVD±R, titles are only deleted from the menu, however, the Title remains physically on the disc.
 If you select “Select All” in the Edit menu, all titles will be checked.
Splitting a Section of a Title (Split)
SK
Follow these instructions to split a section of a Title List entry into two titles.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
2. Press the ▲▼ buttons to select an entry you want to Split from
the Title List, then press the RED(A) button.
The Edit menu is displayed.
Delete
Copy
Rename
Protection
Partial Delete
3 MPEG2
Split
4 JAN/01/2008 17:30
New
1 SPPlaylist
Select
All
V-Mode Compatibility
Edit
84_ editing
01587A-SH871M-XEU-ENG.indb 84
Title List
HDD
JAN/01/2008 17:30 PR1
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Sort
Length
01:00:00
01:00:00
00:30:00
Go to
Contents
a CHECK
eEXIT
2008-04-17 오후 2:02:11
3. Press the ▲▼ buttons to select Split, then press the OK or ►
button.
4. Using the playback-related buttons (PLAY ( ), PAUSE ( ),
SEARCH (
), move to a point for splitting and press the OK
button.
If it is not the point where you want to split, press the RETURN
button to cancel the selection. Using the playback-related
buttons, move to a point to split and press the OK button.
Split
HDD
JAN/01/2008 17:30 PR1
Title List No. 001
Split 1
Split 2
00:00:00
00:00:00
00:00:01
Return
►
Split
Select
► Play
  SCAN
 Pause
< MOVE
sSELECT
rRETURN
eEXIT
5. Press the OK button to select Split.
Split
HDD
JAN/01/2008 17:30 PR1
Title List No. 001
Split 1
Split 2
00:00:20
00:00:20
Return
00:00:00

Split
Select
► Play
  SCAN
 Pause
< MOVE
● EDITING
6. Press the ◄ ► buttons to select Yes, then press the OK button.
The split title is divided into two, and the following titles will be
shifted down by one.
sSELECT
rRETURN
eEXIT
Split
HDD
JAN/01/2008 17:30 PR1
Title List No. 001
Split 1
Split 2
This title cannot be recovered
after splitting.
Do you want to split?
Yes
00:00:00
No
00:00:20
00:00:20
Return

Split
Select
► Play
  SCAN
 Pause
< MOVE
sSELECT
rRETURN
eEXIT
Deleting a Section of a Title (Partial Delete)
SXCK
(VR mode)
Follow these instructions to delete a section of a Title List entry.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
2. Press the ▲▼ buttons to select an entry you want to edit from
the Title List, then press the RED(A) button.
The Edit menu is displayed.
3. Press the ▲▼ buttons to select Partial Delete, then press the
OK or ► button.
4. Press the OK button at the starting point.
The image and starting point time is displayed in the section
deletion starting point window.
• Select the start and end points of the section you want to delete
using the playback related buttons.
• Playback related buttons : (PLAY ( ), PAUSE ( ),
SEARCH (
)).
5. Press the OK button at the end point.
The image and end point time is displayed in the Section deletion
ending point window.
Title List
HDD
JAN/01/2008 17:30 PR1
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Delete
Copy
Rename
Protection
Partial Delete
3 MPEG2
Split
4 JAN/01/2008 17:30
New
1 SPPlaylist
Select
All
V-Mode Compatibility
Edit
Sort
Length
01:00:00
01:00:00
00:30:00
Go to
Contents
a CHECK
eEXIT
Partial Delete
HDD
JAN/01/2008 17:30 PR1
Title List No. 001
Start
End
00:19:10
►
End
Start
► Play
Delete
  SCAN
 Pause
< MOVE
00:41:20
00:41:20
Return
sSELECT
rRETURN
eEXIT
English _85
01587A-SH871M-XEU-ENG.indb 85
2008-04-17 오후 2:02:14
editing
6. Press the ◄ ► buttons to select Delete, then press the OK
button.
Partial Delete
HDD
JAN/01/2008 17:30 PR1
Title List No. 001
Start
End
Do you want to delete?
(Deleted part will not be restored.)
7. Press the ◄ ► buttons to select Yes, then press the OK button.
The selected section has been deleted.
8. Press the ◄ ► buttons to select Return, then press the OK
button to finish the operation.

End
Start
► Play
00:41:20
00:41:20
Return
  SCAN
 Pause
< MOVE
M
00:19:10
No
Yes
Delete
sSELECT
rRETURN
eEXIT
 The length of the section to be deleted must be at least 5 seconds long.
 End point cannot be marked earlier than start point
 The section cannot be deleted when it includes a still picture.
 Press the EXIT (
) button after the operation has finished.
The Title List screen will disappear.
USING THE SORT FUNCTION (TITLE LIST)
SXCVKL
When you need to change the Sort order of Title List, you can sort by Date, Name, Length, Channel info.
1. While the list menu is displayed, press the GREEN(B) button to select Sort.
2. Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
• Date : In order of when the titles were recorded
• Name : In alphabetical order
• Length : In order of recorded title length.
• Channel Info : In order of Channel information.
Title List
HDD
JAN/01/2008 17:30 PR1
3 MPEG2
Length
01:00:00
01:00:00
00:30:00
Date
Name
4 JAN/01/2008 17:30
Length
1 SP
Channel
V-Mode Compatibility
Info
Edit
M
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Sort
Go to
Contents
a CHECK
eEXIT
 You can sort by Date, Name, Length, Channel info. Sorted list will be resorted in copied order upon reentering the Title List.
NAVIGATION MENU
Time Navigation
SXC
(VR mode)
Using this function, you can search scene minute-by-minute from the recorded title list.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
2. Press the ▲▼ buttons to select an entry you want to play from
Title List, then press the YELLOW(C) button.
3. Press the ▲▼ buttons to select Time Navigation, then press the
OK or ► button.
Title List
HDD
JAN/01/2008 17:30 PR1
3 MPEG2
Playlist
Time Navigation
Scene Navigation
4 JAN/01/2008 17:30
1 SP
V-Mode Compatibility
Edit
Length
01:00:00
01:00:00
00:30:00
Sort
Go to
Contents
a CHECK
eEXIT
86_ editing
01587A-SH871M-XEU-ENG.indb 86
2008-04-17 오후 2:02:19
4. Press the ◄ ► buttons to skip one minute at a time and search
the desired scene, then press the OK or PLAY ( ) button.
M
Time Navigation
HDD
3 JAN/01/2008 17:30 PR1
1/3
 Cursor does not move if the selected recorded title is shorter than 1
minute.
 The Navigation function may not work on a disc that has not been
recorded by this device.
00:00
►
17:30
< MOVE
18:30
sSELECT
rRETURN
eEXIT
 An edited title may not display the exact search time.
SXC
● EDITING
Scene Navigation
(VR mode)
If there is a title composed of markers (See page 57), you can search the desired scene using the Scene
Navigation.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
Title List
HDD
JAN/01/2008 17:30 PR1
2. Press the ▲▼ buttons to select an entry you want to play from
Title List, then press the YELLOW(C) button.
3. Press the ▲▼ buttons to select Scene Navigation, then press
the OK or ► button.
4. Press the ▲▼◄ ► buttons to select desired scene, then press
the OK or PLAY ( ) button.
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
3 MPEG2
Playlist
Time Navigation
Scene Navigation
4 JAN/01/2008 17:30
1 SP
V-Mode Compatibility
Edit
Sort
Go to
Contents
a CHECK
eEXIT
Scene Navigation
HDD
M
 Scene Navigation will not operate if a selected title does not have
Length
01:00:00
01:00:00
00:30:00
JAN/01/2008 17:30 PR1
Scene No. 1/3
Markers.
01 00:00:05
02 00:00:35
03 00:01:05
sPLAY
eEXIT
SELECT CONTENTS
SXCVKL
1. Press the BLUE(D) button to select Contents.
2. Press the ▲▼ buttons to select the contents you want to move,
then press the OK or ► button.
M
 This function is possible only when the disc contains the selected
contents.
Title List
HDD
JAN/01/2008 17:30 PR1
3 MPEG2
4 JAN/01/2008 17:30
1 SP
V-Mode Compatibility
Edit
1/3
No.
Title
Length
001 JAN/01/2008 17:30 PR
01:00:00
002 JAN/02/2008 21:00 PR
01:00:00
003 JAN/03/2008 23:15 PR
00:30:00
Title
DivX
Music
Photo
Sort
Go to
Contents
a CHECK
eEXIT
English _87
01587A-SH871M-XEU-ENG.indb 87
2008-04-17 오후 2:02:22
editing
ADVANCED EDITING (PLAYLIST)
Creating a Playlist
SXC
(VR mode)
Follow these instructions to create a new playlist entry from a recorded title.
N Using the TITLE LIST button
1. With the unit in Stop mode/Playback mode, press the
TITLE LIST button.
2. Press the RED(A) button.
The Edit menu is displayed.
3. Press the ▲▼ buttons to select New Playlist, then press the OK
or ► button.
The Make Playlist screen is displayed.
4. Press the OK button at the start point.
• The image and time at the start point is displayed on the Start
window.
• The yellow-coloured selection bar moves to the End item.
• Select the starting point of the section from which you want to
create a new scene using the playback related buttons
(PLAY ( ), PAUSE ( ), SEARCH (
), SKIP (
)).
5. Press the OK button at the end point.
• The image and end point time is displayed in the End window.
• The yellow-coloured selection bar moves to the Make item.
6. Press the ◄ ► buttons to select Make, then press the OK
button.
• To make a scene for the playlist.
A new Make scene screen is displayed. Repeat steps 4~6 to
make a new scene for the playlist. A new scene will be added
to the current playlist. You can check and see all the scenes on
the Edit playlist screen. (See pages 89~92)
• To make a new playlist.
Repeat steps 1~6 if you want to make a new playlist.
Title List
HDD
JAN/01/2008 17:30 PR1
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Delete
Copy
Rename
Protection
Partial Delete
3 MPEG2
Split
4 JAN/01/2008 17:30
New
1 SPPlaylist
Select
All
V-Mode Compatibility
Edit
Sort
Length
01:00:00
01:00:00
00:30:00
Go to
Contents
a CHECK
eEXIT
Make Playlist
HDD
New Playlist
Scene No. 001
Start
Title List 1/3
End
00:08:38
►
End
Start
► Play
Make
  SCAN
 Pause
< MOVE
sSELECT
00:00:00
00:08:38
Return
# $ SKIP
rRETURN
eEXIT
Make Playlist
HDD
New Playlist
Scene No. 001
Start
Title List 1/3
00:08:38

End
Start
► Play
Make
  SCAN
 Pause
< MOVE
sSELECT
rRETURN
End
00:11:03
00:11:03
Return
# $ SKIP
eEXIT
7. Press the ◄ ► button to select Return, then press the OK button to finish the operation.
M
 You can create up to 99 playlist entries.
 Depending on the kind of disc, the displayed screen may have a slight difference.
 If the related title is erased, the playlist is also erased.
88_ editing
01587A-SH871M-XEU-ENG.indb 88
2008-04-17 오후 2:02:26
Playing Entries in the Playlist
SXC
(VR mode)
Follow these instructions to play the playlist entries.
N Using the PLAY LIST button
Playlist
HDD
JAN/02/2008 13:47
3. Press the STOP ( ) button to stop playing.
The screen returns to the Playlist screen.
1/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
003 JAN/02/2008 14:08
2. Press the ▲▼ buttons to select the playlist you want to play,
then press the OK or PLAY ( ) button.
Length
00:06:09
00:03:33
00:01:54
i PLAYLIST
● EDITING
1. With the unit in Stop mode/Playback mode, press the PLAY
LIST button.
4 JAN/02/2008 13:47
7 6 Scenes
Edit
Sort
Title List
a CHECK
eEXIT
Renaming a Playlist Entry
SXC
(VR mode)
Follow these instructions to rename a playlist entry, i.e. to edit the title of a playlist entry.
N Using the PLAY LIST button
1. With the unit in Stop mode/Playback mode, press the PLAY LIST
button.
2. Press the ▲▼ buttons to select the title you want to Rename
from the Playlist, then press the RED(A) button.
The Edit menu is displayed.
3. Press the ▲▼ buttons to select Rename, then press the OK or
► button.
The Rename screen is displayed.
4. Select the desired characters using the ▲▼◄ ► buttons, then
press the OK button.
• Back Space (RED(A) button) : Deletes and moves the cursor
backwards by one position.
• Space (GREEN(B) button) : Enters a blank and moves the
cursor one forward (to the right).
• Clear (YELLOW(C) button) : Deletes all the character inputs.
• Save (BLUE(D) button) : Registers the character inputs.
5. Press the BLUE(D) button to select Save.
The changed title is displayed in the title field of the selected
playlist entry.
Playlist
HDD
JAN/02/2008 13:47
1/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
003 JAN/02/2008 14:08
Length
00:06:09
00:03:33
00:01:54
i PLAYLIST
4 JAN/02/2008 13:47
7 6 Scenes
Edit
Sort
Title List
a CHECK
eEXIT
Playlist
HDD
JAN/02/2008 13:47
Delete
Copy
Rename
i PLAYLIST
Edit
Playlist
4 JAN/02/2008 13:47
New
Playlist
7 6 Scenes
Select All
Edit
1/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
003 JAN/02/2008 14:08
Sort
Length
00:06:09
00:03:33
00:01:54
Title List
a CHECK
eEXIT
Rename
HDD
Dolphin
Back Space
m MOVE
Space
sSELECT
Clear
rRETURN
Save
eEXIT
English _89
01587A-SH871M-XEU-ENG.indb 89
2008-04-17 오후 2:02:29
editing
Editing a Scene for the Playlist
SXC
(VR mode)
Follow these instructions to edit scenes for a playlist.
N Using the PLAY LIST button
1. With the unit in Stop mode/Playback mode, press the PLAY LIST
button.
2. Press the ▲▼ buttons to select the title you want to edit from the
Playlist, then press the RED(A) button.
The Edit menu is displayed.
3. Press the ▲▼ buttons to select Edit Playlist, then press the OK
or ► button.
The Edit Playlist screen is displayed.
Playlist
HDD
JAN/02/2008 13:47
1/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
003 JAN/02/2008 14:08
Delete
Copy
Rename
i PLAYLIST
Edit
Playlist
4 JAN/02/2008 13:47
New
Playlist
7 6 Scenes
Select All
Edit
Sort
Length
00:06:09
00:03:33
00:01:54
Title List
a CHECK
eEXIT
Edit Playlist
HDD
JAN/02/2008 13:47
Scene No. 1/6
01 00:02:24
02 00:00:34
03 00:00:31
05 00:00:09
06 00:01:06
07 00:00:00
Modify
Move
04 00:01:22
Add
Delete
sPLAY
eEXIT
Playing a Selected Scene
4. Press the ▲▼◄ ► buttons to select the scene you want to play, then press the OK or PLAY (
The selected scene is played.
• To stop scene play, press the STOP ( ) button.
) button.
Modifying a Scene (Replacing a Scene)
To setup, follow steps 1 to 3 from using the PLAY LIST button.
4-1. Press the ▲▼◄ ► buttons to select the scene you want to
Modify, then press the RED(A) button.
The Modify Scene screen is displayed.
5. Press the OK button at the start point of the scene.
• The image and starting point time is displayed on the Start
window.
• Select the starting or ending point of the section you want to
modify using the playback related buttons (PLAY ( ), PAUSE
( ), SEARCH (
), SKIP (
)).
6. Press the OK button at the end point of the scene.
• The image and ending point time is displayed in the End
window.
7. Press the ◄ ► buttons to select Change, then press the
OK button.
• The scene you want to modify is changed with the selected
section.
Modify Scene
HDD
JAN/02/2008 13:47
Scene No. 001
Start
Title List 1/3
End
00:04:54
►
End
Start
► Play
Change
  SCAN
 Pause
< MOVE
sSELECT
00:06:25
00:05:27
Return
# $ SKIP
rRETURN
eEXIT
Modify Scene
HDD
JAN/02/2008 13:47
Scene No. 001
Start
Title List 1/3
00:04:54

Start
► Play
< MOVE
End
Change
  SCAN
 Pause
sSELECT
rRETURN
End
00:06:25
00:05:27
Return
# $ SKIP
eEXIT
90_ editing
01587A-SH871M-XEU-ENG.indb 90
2008-04-17 오후 2:02:33
Moving a Scene (Changing the Position of a Scene)
To setup, follow steps 1 to 3 on page 90.
4-1. Press the ▲▼◄ ► buttons to select the scene you want to
move (change the position), then press the GREEN(B) button.
• A yellow selection window is displayed on the scene to be
moved.
5. Press the ▲▼◄ ► buttons to select the position to which you
want to move the selected scene, then select the OK button.
Edit Playlist
HDD
JAN/02/2008 13:47
Scene No. 1/6
01 00:02:24
02 00:00:34
03 00:00:31
05 00:00:09
06 00:01:06
07 00:00:00
Move
Add
Delete
sSAVE
M
eEXIT
 You cannot move the selected scene to the position of the next scene.
 Depending on the kind of disc, the displayed screen may have a slight difference.
● EDITING
Modify
04 00:01:22
Adding a Scene
To setup, follow steps 1 to 3 on page 90.
4-1. Press the ▲▼◄ ► buttons to select the scene that will have a
new scene inserted before it, then press the YELLOW(C) button.
The Add Scene screen is displayed.
5. Press the OK button at the starting point of the scene.
• The image and starting point time is displayed on the Start
window.
• Select the starting or ending point of the section you want to
modify using the playback related buttons (PLAY ( ), PAUSE
( ), SEARCH (
), SKIP (
)).
6. Press the OK button at the end point of the scene.
• The image and end point time are displayed in the End
window.
• To cancel, press the ◄ ► buttons to select Return, then press
the OK button.
7. Press the ◄ ► buttons to select Add, then press OK button.
• The section you want to add is inserted prior to the scene
selected in step 4-1 of Adding a Scene.
Add Scene
HDD
JAN/02/2008 13:47
Scene No. 001
Start
Title List 1/3
End
00:00:00
00:01:51
Return
00:01:51
►
End
Start
► Play
Add
  SCAN
 Pause
< MOVE
sSELECT
# $ SKIP
rRETURN
eEXIT
Add Scene
HDD
JAN/02/2008 13:47
Scene No. 001
Start
Title List 1/3
End
00:01:51
00:07:28
00:07:28
Return

Start
► Play
End
Add
  SCAN
 Pause
< MOVE
sSELECT
# $ SKIP
rRETURN
eEXIT
Deleting a Scene
To setup, follow steps 1 to 3 on page 90.
4-1. Press the ▲▼◄ ► buttons to select the scene you want to
delete, then press the BLUE(D) button.
• The message “Do you want to delete the scene?” is displayed.
5. Press the ◄ ► buttons to select Yes, then press OK to delete
the selected scene.
Edit Playlist
HDD
JAN/02/2008 13:47
01 00:02:24
Scene No. 1/6
02
03
Do you want to delete the scene?
Yes
05 00:00:09
Modify
< MOVE
06 00:01:06
Move
sSELECT
04 00:01:22
No
07 00:00:00
Add
Delete
rRETURN
eEXIT
English _91
01587A-SH871M-XEU-ENG.indb 91
2008-04-17 오후 2:02:39
editing
Deleting a Playlist Entry from the Playlist
N Using the PLAY LIST button
1. With the unit in Stop mode/Playback mode, press the
PLAY LIST button.
2. Press the ▲▼ buttons to select an entry you want to delete in
the Playlist, then press the MARKER button until a checkmark
appears. Repeat this step to select an additional title you want to
delete.
• If you don’t want to delete a certain one of the checked
entries, simply select that entry and press the MARKER to
deselect it until a checkmark disappears.
3. Press the RED(A) button to select Edit.
Edit menu is displayed.
4. Press the ▲▼ buttons to select Delete, then press the OK or ►
button.
• You will be prompted with the delete confirmation message “Do
you want to delete?”.
5. Press the ◄ ► buttons to select Yes, then press the OK button.
You will be automatically returned to the Playlist screen after the
delete operation has finished.
Playlist
HDD
JAN/02/2008 13:47
1/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
003 JAN/02/2008 14:08
Length
00:06:09
00:03:33
00:01:54
i PLAYLIST
4 JAN/02/2008 13:47
7 6 Scenes
Edit
Sort
Title List
a CHECK
eEXIT
Playlist
HDD
JAN/02/2008 13:51
Delete
Copy
i PLAYLIST
New
Playlist 13:47
4 JAN/02/2008
Select
All
7 6 Scenes
Unselect All
Edit
2/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
003 JAN/02/2008 14:08
Sort
Length
00:06:09
00:03:33
00:01:54
Title List
a CHECK
eEXIT
Playlist
HDD
JAN/02/2008 13:51
M
2/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
2 items
selected 14:08
003areJAN/02/2008
Do you want to delete?
 If you select “Select All” in the Edit menu, all titles will be checked.
Length
00:06:09
00:03:33
00:01:54
i PLAYLIST
4 JAN/02/2008 13:47
7 6 Scenes
Edit
Yes
Sort
No
Title List
a CHECK
eEXIT
Using the Sort (Playlist)
When you need to change the Sort order of Playlist, you can sort by
Date and Name.
Playlist
HDD
JAN/02/2008 13:47
1. While the list menu is displayed, press the GREEN(B) button to.
2. Press the ▲▼ buttons to select the desired item, then press the
OK or ► button.
• Date : In order of when the playlists were created
• Name : In alphabetical order
M
1/3
No.
Title
001 JAN/02/2008 13:47
002 JAN/02/2008 13:51
003 JAN/02/2008 14:08
Length
00:06:09
00:03:33
00:01:54
i PLAYLIST
4 JAN/02/2008 13:47
Date
7 6 Scenes
Name
Edit
Sort
Title List
a CHECK
eEXIT
 You can sort by Date, Name. Sorted list will be resorted in copied order upon reentering the Playlist.
92_ editing
01587A-SH871M-XEU-ENG.indb 92
2008-04-17 오후 2:02:44
COPYING FROM HDD TO DVD OR VICE-VERSA
About the Copy Screen
Total size and number of selected titles for copying
Title to be copied
HDD
Selected Items :
● EDITING
Copy
This shows available disc space
Available : 4099MB
Source : HDD
To : DVD
001 JAN/01/2008 1
002 JAN/01/2008 1
003 JAN/01/2008 1
The location where the copied files are stored
DVD
Copy start button
3 MPEG2
0 SP
8 36.5MB
Start Copy
Sort
Selection
a CHECK
Sort button (Date, Name, Length, Channel Info)
eEXIT
Selection button
7
- Select All : All entries in the current folder will be
checked.
- Unselect All : All checked entries will be unchecked.
Contents Copy Specifications
Contents
HDD ΠDVD
DVD ΠHDD
Recorded Video Title
Supported
Supported
Copy Protected Title
Not supported
Not supported
Copy Once Title
Move
(Deletes the Title in the HDD after copying)
Not supported
Copying is possible only with a CPRM-Compatible disc.
Once “Copy Once programme” has been recorded on the DVD disc, this title cannot be copied to HDD
anymore.
But “Copy Once programme” has been recorded on the HDD, this title can be copied to DVD-RW(VR mode)
or DVD-RAM.
N Using the TITLE LIST button
1. Press the OPEN/CLOSE button and place a recordable disc on
the disc tray.
2. Press the OPEN/CLOSE button to close the disc tray. Wait until
LOAD disappears from the front panel display. Check that the
disc has enough available space for the recording.
3. Select a desired mode by pressing the HDD or DVD button on
the remote control.
You can also select a desired mode by pressing the HDD/DVD
button on the front panel.
Title List
HDD
JAN/01/2008 17:30 PR1
1/3
No.
Title
001 JAN/01/2008 17:30 PR
002 JAN/02/2008 21:00 PR
003 JAN/03/2008 23:15 PR
Length
01:00:00
01:00:00
00:30:00
3 MPEG2
4 JAN/01/2008 17:30
1 SP
V-Mode Compatibility
Edit
Sort
Go to
Contents
a CHECK
eEXIT
4. With the unit in Stop mode/Playback mode, press the TITLE LIST button.
English _93
01587A-SH871M-XEU-ENG.indb 93
2008-04-17 오후 2:02:48
editing
5. Press the RED(A) button, then press the ▲▼ button to select
Copy.
Press the OK button. Copy screen is displayed.
6. Press the ▲▼ buttons to select the title you want to copy, then
press the MARKER button until a checkmark appears.
Repeat this step to select an additional title you want to copy.
• If you don’t want to copy a certain one of the checked entries,
simply select that entry and press MARKER button to deselect
it until a checkmark disappears.
7. Press the RED(A) button to select Start Copy.
• The title to be copied is not displayed on the screen, and
copying begins while the currently broadcasting programme is
displayed on the screen.
• Press the INFO button to change the copy processing bar.
If you press INFO button again, copy processing bar will be appeared.
• To cancel the copying in progress, press the RED(A) button.
8. After a successful copy, “The title is successfully copied” message
is displayed.
M
Copy
HDD
Selected Items :
Available : 4099MB
Source : HDD
To : DVD
001 JAN/01/2008 1
002 JAN/01/2008 1
003 JAN/01/2008 1
DVD
3 MPEG2
0 SP
8 36.5MB
Start Copy
Sort
Selection
a CHECK
x
eEXIT
21%
Cancel
b Bar Type
c Channel
 The HDD & DVD Recorder uses high speed copying and therefore there may be a small amount of noise.
DVD-Video Copy
1. Press the OPEN/CLOSE button and place a DVD-Video disc on
the disc tray.
DVD ➝ HDD
● Copying
2. Press the OPEN/CLOSE button to close the disc tray.
3. During the playback, press the COPY button.
Copying will be started.
M
 The Copy function will be disabled in the if you try to copy any of the
following:
- A section of the menu.
- A NTSC disc or copy-protected disc
- Titles that are different in the broadcasting system
 The audio title that is copied to the HDD will be recorded in the 2ch AC3 format.
 For the audio output in DTS mode, the audio source will not be copied.
COPYING MP3, JPEG OR DIVX
Contents Copy Specifications
Contents
HDD ΠDVD
DVD ΠHDD
MP3
Supported
Supported
JPEG(photo)
Supported
Supported
DivX
Supported
Supported
CD-DA
Not supported
Supported
• Disc (CD-DA/CD-R/CD-RW/DVD-RAM/DVD±R(Finalise)/DVD+RW/DVD-RW(Finalise)) Œ HDD
• HDD Œ DVD-R, DVD-RW(V)
• If the disc is finalised through Disc Manager, it can be compatible with PC as a disc with a UDF file system.
94_ editing
01587A-SH871M-XEU-ENG.indb 94
2008-04-17 오후 2:02:52
File Copy
1. Insert a JPEG disc, MP3 disc or DivX disc into the disc tray.
2. Press the OPEN/CLOSE button to close the disc tray. Wait until
LOAD disappears from the front panel display. Check that the
disc has enough available space for the recording.
3. Press the ▲▼ buttons to select Library, then press the OK or ►
button.
5. Press the RED(A) button, then press the ▲▼ button to select
Copy.
Press the OK button. Copy screen is displayed.
6. Press the ▲▼ buttons to select the MP3, Photo or DivX file you
want to copy, then press the MARKER button until a checkmark
appears.
• If you don’t want to copy a certain one of the checked entries,
simply select that entry and press MARKER button to deselect
it until a checkmark disappears.
7. Press the ► button, then press the OK button to make the first
folder where the copied files are stored.
• You can create a new folder by pressing the GREEN(B) button.
8. Press the RED(A) button to select Start Copy.
• The message “Number of file : x” is displayed.
9. Press the ◄ ► buttons to select Start, then press the OK button.
File copy begins.
• To cancel the copying in progress, press the EXIT ( ) button.
Copy
Available :
Source : DVD
9 MP3
8 5.85MB
To :
Y ROOT
001 SONG 10.mp3
002 SONG 1.mp3
003 SONG 2.mp3
004 SONG 3.mp3
005 SONG 4.mp3
Start Copy
Sort
#/$ PREVIOUS/NEXT PAGE
E HDD
Selection All
Unselect All
a CHECK
eEXIT
CD
Copy
Selected Items: 9.68MB (2)
Available : 236724MB
Source : DVD
9 MP3
8 3.84MB
To : HDD
Y ROOT
001 SONG 10.mp3
002 SONG 1.mp3
003 SONG 2.mp3
004 SONG 3.mp3
005 SONG 4.mp3
Start Copy
New Folder
ROOT
● EDITING
4. Press the ▲▼ buttons to select Music, Photo or DivX, then
press the OK or ► button.
CD
Selected Items: 5.85MB (1)
Rename
eEXIT
CD
Copy
Selected Items: 9.68MB (2)
Available : 236724MB
Source : DVD
9 MP3
8 3.84MB
To : HDD
Y ROOT
001 SONG 10.mp3
Number of file : 2
002 SONG 1.mp3
003 SONG 2.mp3
Start
004 SONG 3.mp3 EXIT
005 SONG 4.mp3
Start Copy
New Folder
ROOT
Rename
eEXIT
CD
Copy
Selected Items: 9.68MB (2)
Available : 236724MB
Source : DVD
To : HDD
Copying...
Y ROOT
ROOT
Free space
23662310.mp3
MB
001: SONG
Number of file : 2 / 8
002: Song
SONG1.mp3
1.mp3
File Name
003 SONG 2.mp3
9 MP3
33%
004 SONG 3.mp3
8 3.84MB
005 SONG 4.mp3
Start Copy
New Folder
Rename
eEXIT
Folder Copy
1. Insert a Disc (JPEG, MP3 or DivX) into the tray.
2. Press the ▲▼ buttons to select Library, then press the OK or ►
button.
3. Press the ▲▼ buttons to select Music, Photo or DivX then
press the OK or ► button.
MP3, JPEG or DivX folder is displayed.
CD
Copy
Selected Items: 33.7MB (2)
Source : DVD
9 MP3
8 40.2MB
Start Copy
Available :
To :
Y
E
E
E
ROOT
MP3 (1)
MP3 (2)
MP3 (3)
Sort
E HDD
Selection
Unselect All
a CHECK
eEXIT
English _95
01587A-SH871M-XEU-ENG.indb 95
2008-04-17 오후 2:02:54
editing
4. Press the RED(A) button, then press the ▲▼ button to select
Copy.
Press the OK button. Copy screen is displayed.
5. Press the ▲▼ buttons to select the folder you want to copy, then
press the MARKER button until a checkmark appears.
• If you don’t want to copy a certain one of the checked folders,
simply select that entry and press MARKER button to deselect
it until a checkmark disappears.
6. Press the ►▲▼ or OK button to select the location where the
copied files are stored.
• You can create a new folder by pressing the GREEN(B) button.
7. Press the RED(A) button to select Start Copy.
The message “Number of file : x” is displayed.
• The item is named the number of file that is available in the
folder.
8. Press the ◄ ► buttons to select Start, then press the OK button.
Folder copy begins.
Subfolders and files in the selected folder are copied.
• To cancel the copying in progress, press the EXIT ( ) button.
CD
Copy
Selected Items: 76.8MB (2)
Source : DVD
9 MP3
8 36.6MB
Start Copy
Available : 236715MB
To : HDD
Y
E
E
E
ROOT
MP3 (1)
MP3 (2)
MP3 (3)
ROOT
New Folder
eEXIT
CD
Copy
Selected Items: 76.8MB (2)
Source : DVD
To : HDD
Y ROOT
001 SONG 10.mp3
Number of file : 2
002 SONG 1.mp3
9 MP3
8 3.84MB
Start Copy
Available : 236715MB
ROOT
003 SONG 2.mp3
004 Start
SONG 3.mp3 EXIT
005 SONG 4.mp3
New Folder
eEXIT
CD
Copy
Selected Items: 76.8MB (2)
Available : 236715MB
Source : DVD
To : HDD
Copying...
Y ROOT
ROOT
Free space
23661510.mp3
MB
001: SONG
Number of file : 2 / 8
002: 01.
SONG
1.mp3
File Name
### ##
1.mp3
003 SONG 2.mp3
9 MP3
33%
004 SONG 3.mp3
8 3.84MB
005 SONG 4.mp3
Start Copy
New Folder
eEXIT
M
 Pressing the EXIT (
) button during folder copying will cancel the folder copying after the current file is copied.
 You can copy up to 500 files or sub folders to one folder. [ MP3, JPEG, DivX ]
 If you want to file copy, you should create a new folder before starting a copy.
You cannot copy to top-level(ROOT) folder directly without creating a new folder.
 If the top-level (ROOT) folder has had already 500 folders, you should delete one or more items before you can
create a new folder.
 File size on a disc and the copied file in the HDD may be slightly different due to the file system.
 If you check some entries in the current folder and move to open a different folder, those entries are automatically
unchecked and excluded from the selection list.
96_ editing
01587A-SH871M-XEU-ENG.indb 96
2008-04-17 오후 2:03:00
CHANGING THE NAME OF MUSIC/PHOTO/DIVX FILE
S
You can rename a Music, Photo or DivX file copied to HDD.
1. Press the ▲▼ buttons to select the entry you want to rename,
then press the RED(A) button.
3. Select the desired characters using the ▲▼◄ ► buttons, then
press the OK button.
• Back Space (RED(A) button) : Deletes and moves the cursor
backwards by one position.
• Space (GREEN(B) button) : Enters a blank and moves the
cursor one forward (to the right).
• Clear (YELLOW(C) button) : Deletes all the character inputs.
• Save (BLUE(D) button) : Registers the character inputs.
SONG 10.mp3
No.
Title
ROOT
SONG 1.MP3
SONG 2.MP3
SONG 3.MP3
SONG 4.MP3
SONG 5.MP3
SONG 6.MP3
Y
001
002
003
004
005
006
Copy
New Playlist
 ►  00:02:22
Go To Playlist
9 SONG 10.mp3
Select All
E ROOT
Delete
Rename
Edit
Sort
#/$ PREVIOUS/NEXT PAGE
Size
3.8 MB
3.8 MB
5.1 MB
9.2 MB
5.2 MB
10.3 MB
Play Mode
Contents
a CHECK
eEXIT
● EDITING
2. Press the ▲▼ buttons to select Rename, then press the OK or
► button.
Rename Screen is displayed.
Music List
HDD
Rename
HDD
Dream
4. Press the BLUE(D) button to select Save.
The changed file name is displayed on the selected entry.
Back Space
m MOVE
Space
sSELECT
Clear
Save
rRETURN
eEXIT
Music List
HDD
Dream.mp3
1/9
No.
Title
Y
Q
002
003
004
005
006
 ►  00:00:00
9 Dream.mp3
E ROOT
Edit
Size
ROOT
Dream.mp3
SONG 2.MP3
SONG 3.MP3
SONG 4.MP3
SONG 5.MP3
SONG 6.MP3
Sort
#/$ PREVIOUS/NEXT PAGE
3.8 MB
3.8 MB
5.1 MB
9.2 MB
5.2 MB
10.3 MB
Play Mode
Contents
a CHECK
eEXIT
DISC MANAGER
Editing the Disc Name
XCVKL
Follow these instructions to give a name to a disc.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Disc Manager, then press the
OK or ► button.
3. Press the ◄ ► buttons to select Rename, then press the OK button.
The Rename screen is displayed.
4. Select the desired characters using the ▲▼◄ ► buttons, then
press the OK button.
5. Press the BLUE(D) button to select Save.
A disc name is given to the disc.
M
 You may need to clear Disc Protection before editing.
DVD-RAM(VR)
Disc Manager
Disc Name
Used Space
00:17
Available Space
01:54 SP ( 3.85 GB)
Disc Protection Info
Not Protected
Current Rec. Mode
VR-Mode
Rename
< MOVE
Protection
sSELECT
( 0.52 GB)
Delete All
rRETURN
DVD-RAM(VR)
Format
eEXIT
Rename
DISC–1
 Depending on the kind of disc, the displayed screen may be different.
 If you have recorded a DVB-T radio channel program, the time information
displayed for each of free and used space may be incorrect.
Back Space
m MOVE
Space
sSELECT
Clear
Save
rRETURN
eEXIT
English _97
01587A-SH871M-XEU-ENG.indb 97
2008-04-17 오후 2:03:04
editing
Disc Protection
XCV
Disc Protection allows you to protect your discs from being formatted or deleted due to unintended
operations.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Disc Manager, then press the
OK or ► button.
3. Press the ◄ ► buttons to select Protection, then press the OK
button.
4. Press the ◄ ► buttons to select On, then press the OK button.
DVD-RAM(VR)
Disc Manager
Disc Name
Used Space
00:17
Available Space
01:54 SP ( 3.85 GB)
Disc Protection Info
Not Protected
Current Rec. Mode
VR-Mode
Rename
Protection
< MOVE
( 0.52 GB)
Delete All
sSELECT
rRETURN
DVD-RAM(VR)
Format
eEXIT
Disc Manager
Disc Name
Used Space
00:17
Available Space
Disc Protection Info
Current Rec. Mode
Rename
Not Protected
On
Protection
< MOVE
( 0.52 GB)
01:54 SP ( 3.85 GB)
Disc Protection:
VR-Mode
Off
Delete All
sSELECT
rRETURN
Format
eEXIT
Delete All Title Lists
XCVKL
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Disc Manager, then press the
OK or ► button.
3. Press the ◄ ► buttons to select Delete All, then press the OK
button.
• You will be prompted with the confirmation message “Do you
want to delete all title lists?”.
• When Protected Entry exists the Delete All Title List function will
not operate. If there is a title containing a still picture, the Delete
All Title List function will not operate.
If you want to delete a protected entry, disable Protect for it on
the Lock item.
• When a protected DVD-RAM/-RW is used, data cannot be
deleted from that disc.
• If you select Yes, you will be prompted with the confirmation
message “All playlists will also be deleted. Do you want to
continue?”.
DVD-RAM(VR)
Disc Manager
Disc Name
Used Space
00:17
Available Space
01:54 SP ( 3.85 GB)
Disc Protection Info
Not Protected
Current Rec. Mode
VR-Mode
Rename
Protection
< MOVE
( 0.52 GB)
Delete All
sSELECT
rRETURN
DVD-RAM(VR)
Format
eEXIT
Disc Manager
Disc Name
Used Space
00:17
Available Space
( 0.52 GB)
01:54 SP ( 3.85 GB)
Do you want to delete all title lists?
Disc Protection Info
Current Rec. Mode
Rename
< MOVE
Not Protected
Yes
Protection
sSELECT
VR-Mode
No
Delete All
rRETURN
Format
eEXIT
4. Press the ◄ ► buttons to select Yes, then press the OK button.
All title lists are deleted.
98_ editing
01587A-SH871M-XEU-ENG.indb 98
2008-04-17 오후 2:03:09
Delete All Title Lists/DivX Lists /Music Lists/Photo Lists
S
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Disc Manager, then press the
OK or ► button.
HDD
Disc Manager
Used Space
000:39
Available Space
065:19 XP ( 231.01 GB)
( 1.68 GB)
3. Press the ◄ ► buttons to select Delete, then press the OK
button.
5. Press the ◄ ► buttons to select Yes, then press the OK button.
All title lists, DivX lists, music lists or photo lists are deleted.
Delete
< MOVE
sSELECT
Format
rRETURN
eEXIT
HDD
Disc Manager
Used Space
000:39
Available Space
065:19 XP ( 231.01 GB)
● EDITING
4. Press the ◄ ► buttons to select the Title, DivX, Music or Photo,
then press the OK button.
( 1.68 GB)
Select contents to delete all
DivX
Title
Music
Photo
Delete
< MOVE
sSELECT
Format
rRETURN
eEXIT
HDD
Disc Manager
Used Space
000:39
Available Space
( 1.68 GB)
065:19 XP ( 231.01 GB)
All playlists will also be deleted.
Do you want to continue?
Yes
No
Delete
< MOVE
sSELECT
Format
rRETURN
eEXIT
Formatting a Disc
SXCK
Use these instructions to format a disc.
The disc protect should also be cleared.
1. With the unit in Stop mode, press the MENU button.
HDD
Disc Manager
Used Space
000:39
Available Space
065:19 XP ( 231.01 GB)
2. Press the ▲▼ buttons to select Disc Manager, then press the
OK or ► button.
3. Press the ◄ ► buttons to select Format, then press the OK
button.
HDD/DVD-RAM/+RW
• You will be prompted with the confirmation message “Current
media : ✳✳✳ Do you want to format?”.
• If you select Yes, you will be prompted with the confirmation
message “All data will be deleted. Do you want to continue?”.
( 1.68 GB)
Delete
< MOVE
sSELECT
Format
rRETURN
eEXIT
HDD
Disc Manager
Used Space
000:39
Available Space
( 1.68 GB)
065:19 XP ( 231.01 GB)
Current media: HDD
Do you want to format?
Yes
No
Delete
< MOVE
sSELECT
Format
rRETURN
eEXIT
English _99
01587A-SH871M-XEU-ENG.indb 99
2008-04-17 오후 2:03:11
editing
DVD-RW
• You will be prompted with the confirmation message “Choose
the recording format for DVD-RW.”
• If you select the desired format type, you will be prompted with
the confirmation message “All data will be deleted. Do you
want to continue?”.
4. Press the ◄ ► buttons to select Yes, then press the OK button.
The disc is formatted.
DVD-RW(VR)
Disc Manager
Disc Name
Used Space
00:17
Available Space
01:54 SP ( 3.85 GB)
Disc Protection Info
Not Protected
Current Rec. Mode DVD-VR
VR-Mode
DVD-V
( 0.52 GB)
Choose the recording format for DVD-RW.
Rename
< MOVE
Protection
Delete All
sSELECT
rRETURN
Format
eEXIT
DVD-VR and DVD-V are defined according to their recording format.
DISC
DVD-VR
DVD-V
DVD-RAM/-RW
DVD-RW/DVD-R
• With DVD+RW discs, there is no difference between DVD-Video format (Video mode) and DVD-Video
Recording format (VR mode).
Finalising a Disc
CVL
After you record titles onto a DVD-RW/±R disc with your HDD & DVD Recorder, it needs to be finalised before
it can be played back on other devices.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Disc Manager, then press the
OK or ► button.
3. Press the ▲▼◄ ► buttons to select Finalise, then press the OK
button. You will be prompted with the message “Do you want to
finalise disc?”.
4. Press the ◄ ► buttons to select Yes, then press the OK button.
You will be prompted again with the message “Disc will be
finalised. Do you want to continue?”.
5. Press the ◄ ► buttons to select Yes, then press the OK button.
The disc is finalised.
DVD-RW(VR)
Disc Manager
Disc Name
Used Space
00:17
Available Space
01:54 SP ( 3.85 GB)
Disc Protection Info
Not Protected
Current Rec. Mode
VR-Mode
Rename
Protection
m MOVE
Delete All
Finalise
sSELECT
rRETURN
DVD-RW(VR)
 Once a disc is finalised, you cannot delete entries from the record list.
 After being finalised, the DVD±R/-RW(video mode) operates in the
same manner as a DVD-Video.
 Depending on the disc type, the displayed screen may be different.
 Finalising time may be different depending on the amount of data
recorded on the disc.
 Data on the disc will be damaged if the recorder is powered off during
finalisation process.
 You can finalise the disc automatically using EZ Record.
(See page 45)
Format
eEXIT
Disc Manager
Disc Name
Used Space
00:17
Available Space
M
( 0.52 GB)
( 0.52 GB)
01:54 SP ( 3.85 GB)
Do you want to finalise disc?
Disc Protection Info
Current Rec. Mode
Not Protected
Yes
VR-Mode
No
Rename
Protection
< MOVE
Delete All
Finalise
sSELECT
rRETURN
DVD-RW(VR)
Format
eEXIT
Disc Manager
Disc Name
Used Space
00:17
Available Space
( 0.52 GB)
01:54 SP ( 3.85 GB)
Disc Protection Info
Current Rec. Mode
Disc will be finalised.
Do you want to continue?
Not Protected
Yes
VR-Mode
No
Rename
Protection
< MOVE
Delete All
Finalise
sSELECT
rRETURN
Format
eEXIT
100_ editing
01587A-SH871M-XEU-ENG.indb 100
2008-04-17 오후 2:03:13
Unfinalising a Disc (V/VR mode)
C
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Disc Manager, then press the
OK or ► button.
DVD-RW(VR:F)
Disc Manager
Disc Name
Current Rec. Mode
VR-Mode
4. Press the ◄ ► buttons to select Yes, then press the OK button.
You will be prompted again with the message “Disc will be
unfinalised. Do you want to continue?”.
5. Press the ◄ ► buttons to select Yes, then press the OK button.
The disc is unfinalised.
Unfinalise
< MOVE
sSELECT
rRETURN
DVD-RW(VR:F)
Format
eEXIT
Disc Manager
● EDITING
3. Press the ◄ ► buttons to select Unfinalise, then press the OK
button.
You will be prompted with the message “Do you want to
unfinalise disc?”.
Disc Name
Current Rec. Mode
VR-Mode
Do you want to unfinalise disc?
Yes
No
Unfinalise
< MOVE
sSELECT
rRETURN
DVD-RW(VR:F)
Format
eEXIT
Disc Manager
Disc Name
Current Rec. Mode
VR-Mode
Disc will be unfinalised.
Do you want to continue?
Yes
No
Unfinalise
< MOVE
M
sSELECT
rRETURN
Format
eEXIT
 A DVD-RW can be finalised or unfinalised in Video mode.
Finalise
Mark
Operation
Unfinalise
DVD-Video(RW)
DVD-RW(V)
Same as DVD-Video
Additional recording, protection and deletion
are possible.
 A DVD-RW can be finalised or unfinalised in VR mode.
Finalise
Unfinalise
Mark
DVD-RW(VR:F)
DVD-RW(VR)
Operation
Additional recording, deletion, editing, and
protection are impossible.
Additional recording, deletion, editing, and
protection are possible.
English _101
01587A-SH871M-XEU-ENG.indb 101
2008-04-17 오후 2:03:14
reference
TROUBLESHOOTING
If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service
centre.
PROBLEM
EXPLANATION/SOLUTION
The input is displayed for a while when the
power is turned on.
The HDD & DVD Recorder requires some time to initialise and the input will be
displayed for approx. 10 seconds after it is turned on.
Cannot record TV programmes.
• Check whether the power cord is securely plugged into the power outlet.
• Did you set the HDD & DVD Recorder channel settings correctly?
• Check the free space on your HDD/DVD-RAM/±RW/±R discs.
I pressed the REC button but there is no
response.
Check available disc type. (See page 67)
If a programme is copy protected, it cannot be recorded.
Cannot play the disc.
• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of the DVD disc.
• This HDD & DVD Recorder cannot play some types of discs. (See pages 8, 51)
icon appears on the screen.
You cannot use this operation or function due to one of the following reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support this feature (for example: angles)
(3) The feature is not available at the moment.
(4) You’ve requested a title, chapter, or scan time that is out of range.
Play mode settings are different from the
settings configured in the Settings menu.
The disc does not support all selected functions.
In this case, some settings configured in the settings menu may not work properly.
Cannot change the aspect ratio.
The aspect ratio is fixed for DVD discs. (See page 41)
The angle operation does not work while
playing a DVD disc.
The angle operation is available only when the disc contains images captured from
diff erent angles.
The selected audio and/or subtitle language
is not played.
Audio and subtitle languages are disc-specific. Only the sound and subtitle languages
contained on the DVD disc are available and displayed in the disc menu.
Cannot copy title or file to the other mode.
• DVD discs encoded with copy protection can not be copied to HDD.
• Refer to “Contents Copy Specifications” on page 7 to check if copying is supported.
• Refer to “V-Mode Compatibility” on page 46 to check if copying is support.
The disc revolves, but no image or bad
quality images is displayed.
• Be sure that the Video Setting is properly set. (See pages 41~42)
• Check whether there is damage to or any foreign material on your disc.
• Some low quality discs may not play properly.
• If scenes change from dark to bright suddenly, the screen may shake vertically
temporarily, but this is not a fault.
102_ reference
01587A-SH871M-XEU-ENG.indb 102
2008-04-17 오후 2:03:16
PROBLEM
EXPLANATION/SOLUTION
• Are you watching a programme in slow or skip mode?
If you are playing a programme at a speed other than normal speed, sound will not
be heard. (Except for forward search (X 2) in disc.)
• Check the connections and settings. (See pages 24~29, 39~40)
• Check whether the disc is damaged. Clean the disc, if necessary.
• Check whether the disc is inserted correctly with the label facing up.
No audio output.
Check whether you have selected the correct digital output options in the Audio
Output Options menu. (See pages 39~40)
Timer lamp flickers.
• Check there is enough space in the disc or HDD for recording.
• Check whether the current disc is recordable or not.
Make sure to check before the start time of recording.
Timer recording does not work properly.
• Re-check the recording time and the end time settings again.
• Recording will be cancelled if the power is interrupted due to a power failure or
another similar reason while recording.
No HDMI output.
• Check the Video output is HDMI enabled.
• Check the connection between the TV and the HDMI jack of the HDD & DVD
Recorder.
• See if your TV supports HDMI.
Abnormal HDMI output screen.
If snow noise appears on the screen, it means that TV does not support HDCP
(Highbandwidth Digital Content Protection).
HDMI output Jitter.
• Check your TV system setup correctly.
• Please refer to the user’s manual of your TV.
The remote control doesn’t work.
• Point the remote control at the remote control sensor on your HDD & DVD Recorder.
Allow for proper distance. Remove obstacles between your HDD & DVD Recorder
and the remote control.
• Check whether the batteries are drained.
• Check the TV/DVD selection button setting.
• Check whether TV, DVD or HDD control button is selected or not.
I forgot my password for parental
supervision.
Press and hold the PLAY/PAUSE (❯II) buttons on the front panel for more than 10
seconds with no disc in the unit. All settings including the password will revert to the
factory settings. Do not use this unless absolutely necessary.
Is it possible to change a subtitle and an
audio signal on a recorded disc?
A recorded disc is played with only the subtitle and the audio signal which were
selected during recording.
Other problems.
• Read the table of contents and then find and read the section describing your
problem, follow the instructions given.
• Plug your HDD & DVD Recorder off and on.
• If the problem still persists, contact a nearby Samsung service centre.
● REFERENCE
No sound.
English _103
01587A-SH871M-XEU-ENG.indb 103
2008-04-17 오후 2:03:17
appendix
SPECIFICATIONS
General
Input
Power requirements
220-240 V AC, 50 Hz
Power consumption
30 Watts / 2.5 Watts (Power off )
Weight
3,8 Kg
Dimensions
430 mm(W) x 300 mm(D) x 55 mm(H)
Operating temp.
+5 °C to +35 °C
Other conditions
Keep level when operating. Less than 75% operating humidity
Video
Composite Video : 1.0 V p-p at 75Ω load, sync negative
Audio
Max.Audio Input Level : 2 Vrms
DV Input
IEEE 1394(4p) compatible jack
Receivable Channels
PAL-I, B/G, D/K, SECAM-L/L’, DVB-T
Scart Jack
AV2 (Scart Ext)
Video : Composite, RGB, Audio: analogue
Analogue output jacks x 1
Audio
Optical/Coaxial digital audio output
Composite Video : Video output jack x 1
Output
Component output x 1 (Y : 1,0Vp-p, PB : 0,70Vp-p, PR : 0,70Vp-p at 75Ω load)
Video
HDMI/DVI (576p, 720p, 1080i, 1080p)
Scart Jack
Recording
HDD Capacity
AV1 (Scart TV)
Video : Composite, RGB, Audio: analogue
Picture Compression format
MPEG-II
Audio Compression format
Dolby Digital 2ch/256Kbps, MPEG-II
Recording Quality
XP (about 8,5 Mbps), SP (about 4,5 Mbps), LP (about 2,5 Mbps),
EP (about 1,6 Mbps or about 1,2 Mbps)
Audio Frequency Response
20 Hz~20 kHz
DVD-SH871M
160 GB
Audio Output
For DVD discs, audio signals recorded at 96 kHz sampling frequency are converted into and output at 48 kHz.
Disc Type
DVD
Analogue Audio Output
48 / 96 kHz
AUDIO CD (CD-DA)
44,1 kHz
Digital Audio Output
48 kHz
44,1 kHz
104_ appendix
01587A-SH871M-XEU-ENG.indb 104
2008-04-17 오후 2:03:17
UNITED KINGDOM
This Samsung product is warranted for the period of
twelve (12) months from the original date of
purchase, against defective materials and
workmanship. In the event that warranty service is
required, you should return the product to the retailer
from whom it was purchased.
However, Samsung Authorised Dealers and
Authorised Service Centres in other EC Countries
will comply with the warranty on the terms issued to
purchasers in the country concerned.
In case of difficulty, details of our Authorised Service
Centres are available from:
Samsung Electronics U.K. Ltd.
Customer Care Centre
PO Box 17243
Edinburgh, EH11 4YB
United Kingdom
Tel : 0870 SAMSUNG (7267864),
Fax : 0870 7221127 (United Kingdom)
Tel : 0818 717 100,
Fax : +44 (0)870 7221127 (Republic of Ireland)
Web : www.samsung.com/uk
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original
invoice or sales slip or confirmation, and the serial
number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or,
at its discretion, replacement of the product or the
defective part.
3. Warranty repairs must be carried out by
Authorised Samsung Dealers or Authorised
Service Centres. No re-imbursement will be made
for repairs carried out by non Samsung Dealers
and, any such repair work and damage to the
products caused by such repair work will not be
covered by this warranty.
01587A-SH871M-XEU-ENG.indb 105
REPUBLIC OF
IRELAND
4. This product is not considered to be defective
in materials nor workmanship by reason that it
requires adaptation in order to conform to national or local technical or safety standards in force in
any Country other than the one for which the
product was originally designed and manufactured. This warranty will not cover, and no
re-imbursement will be made for such adaptation
nor any damage which may result.
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or
replacement of parts due to normal wear and
tear.
b) Cost relating to transport, removal or installation of the product.
c) Misuse, including the faiure to use this product
for its normal purposes or incorrect installation.
d) Damage caused by Lightning, Water, Fire,
Acts of God, War, Public Disturbances, incorrect mains voltage, improper ventilation or any
other cause beyond the control of Samsung.
6. This warranty is valid for any person who legally
acquired possession of the product during the
warranty period.
7. The consumers statutory rights in any applicable
national legislation whether against the retailer
arising from the purchase contract or otherwise
are not affected by this warranty. Unless there
is national legislation to the contrary, the rights
under this warranty are the consumers sole rights
and Samsung, its subsidiaries and distributors
shall not be liable for indirect or consequential
loss or any damage to records, compact discs,
videos or audio taper or any other related equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.
2008-04-17 오후 2:03:18
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Region
North America
Latin America
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
NICARAGUA
HONDURAS
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
Europe
CIS
Asia Pacific
Middle East &
Africa
Customer Care Center
1-800-SAMSUNG(726-7864)
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421 , 4004-0000
800-SAMSUNG(726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
01-8000112112
0032 (0)2 201 24 18
844 000 844
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka
Vyskočilova 4, 14000 Praha 4
70 70 19 70
030-6227 515
Web Site
www.samsung.com/ca
www.samsung.com
www.samsung.com
www.samsung.com/ar
www.samsung.com
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com.co
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
FRANCE
3260 SAMSUNG (€ 0,15/Min),
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
EIRE
AUSTRIA
SWITZERLAND
RUSSIA
KAZAHSTAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
UKRAINE
LITHUANIA
LATVIA
ESTONIA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
TURKEY
SOUTH AFRICA
U.A.E
01805 - SAMSUNG(726-7864) (€ 0,14/Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
0035 (0)2 261 03 710
0900-SAMSUNG(726-7864) (€ 0,10/Min)
815-56 480
0 801 801 881 , 022-607-93-33
80820-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
902 10 11 30
0771-400 200
0845 SAMSUNG (7267864)
0818 717 100
0800-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
8-800-555-55-55
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
8-800-502-0000
8-800-77777
800-7267
800-7267
1300 362 603
0800SAMSUNG(726-7864)
800-810-5858 , 010-6475 1880
3698-4698
3030 8282 , 1800 110011
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232 , 02-689-3232
0800-329-999
1 800 588 889
444 77 11
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864), 8000-4726
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/be
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com
www.samsung.com/se
www.samsung.com
www.samsung.com/ie
www.samsung.com/at
www.samsung.com/ch
www.samsung.com
www.samsung.kz
www.samsung.uz
01587A-SH871M-XEU-ENG.indb 106
www.samsung.com
www.samsung.lt
www.samsung.com/lv
www.samsung.ee
www.samsung.com
www.samsung.com/nz
www.samsung.com
www.samsung.com/hk
www.samsung.com
www.samsung.com
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com
www.samsung.com
www.samsung.com/tw
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
2008-04-17 오후 2:03:19
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Code No. AK68-01587A
01587A-SH871M-XEU-ENG.indb 107
2008-04-17 오후 2:03:21