LG | 34UM95-P | LG 34UM95-P Owner’s Manual

Owner's Manual
IPS LED COMPUTER
MONITOR
(LED COMPUTER
MONITOR*)
*Disclaimer: LG LED Monitor applies LCD screen with LED backlights.
This product is a computer monitor and not for television purpose.
Please read the safety information carefully
before using the product.
IPS LED Monitor (LED Monitor) Model List
34UM95-PD
34UM95-PE
34UM94-PD
www.lg.com
2
Table of Contents
ENGLISH
TABLE OF CONTENTS
3LICENSE
4ASSEMBLING AND
PREPARING
4
Product Composition
5
Product and Button Description
5
- How to Use the Joystick Button
6
- Input Connector
7
Moving and Lifting the Monitor
8
Installing the Monitor
8
- Assembling the Stand
9
- Detaching the Stand
10
- Installing on a Table
11
- Adjusting the Angle
11
- Tidying up Cables
12
- Installing the Wall Mount Plate
12
- Installing on the Wall
14
- Using the Kensington Lock
15 USING THE MONITOR
MONITOR SOFTWARE
22 USER SETTINGS
22
Activating the Main Menu
22
- Main Menu Features
23
User Settings
23
- Menu Settings
24
-Ratio
25
-Function
26
-PBP
27
-Picture
28
-Color
29
-Settings
30
-Reset
31
-Reader
32TROUBLESHOOTING
34 PRODUCT SPECIFICATION
35
Factory Support Mode
15
Connecting to a PC
15
- HDMI Connection
16
- DisplayPort Connection
16
- Thunderbolt ( ) Connection
17
Connecting Peripherals
17
- USB Cable connection - PC
36 PROPER POSTURE
18
- Connecting Headphones
36
19 INSTALLING THE LG
(Preset Mode, HDMI/DisplayPort/
Thunderbolt PC)
35
Power LED
Proper Posture for Using the Monitor
License
3
LICENSE
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance
logo for dual-mode source devices are all registered trademarks of the Video
Electronics Standards Association.
ENGLISH
Each model has different licenses. Visit www.lg.com for more information on the license.
4
ASSEMBLING AND PREPARING
ENGLISH
ASSEMBLING AND PREPARING
Product Composition
Please check whether all the components are included in the box before using the product. If there are
any missing components, contact the retailer where you purchased the product. Note that the product and
related components may look different from those shown here.
CD (Owner's Manual /
Software) / Guides /
Cards
Power cord
AC/DC Adapter
HDMI cable
Stand Base
Screw Cover
Two Screws
(M4 x 10)
DisplayPort Cable
(Depending on country)
Clear sheet
CAUTION
yy Always use genuine LG components to ensure safety and product performance.
yy The product warranty will not cover damage or injury caused by the use of unauthorized components.
yy It is recommend that use the supplied components.
NOTE
yy The components may look different from those illustrated here.
yy Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
yy To purchase optional accessories, visit an electronics store or an online shopping site, or contact the
retailer from which you purchased the product.
yy The power cord provided may differ depending upon the region.
ASSEMBLING AND PREPARING
5
Product and Button Description
ENGLISH
Power LED
yy On Power on
yy Off Power off
Joystick
Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
◄/►
Power on
Press the joystick button once with your finger to turn on the
monitor.
Power off
Press and hold the joystick button once with your finger to turn off
the monitor.
Volume
Control
You can control the volume by moving the joystick button left/right.
NOTE
yy The joystick button is located at the bottom of the monitor.
yy Before turning on the monitor, please make sure that the DC switch on the rear side of product is On.
(Only 34UM95-PE)
6
ASSEMBLING AND PREPARING
34UM95-PD
HDMI IN 2
34UM94-PD
HDMI IN 2
DC-IN
(19 V
)
H/P
HDMI IN 1
DP IN
USB UP
USB IN 1
5V
1.1 A
USB IN 2
5V
0.5 A
USB IN 3
5V
0.5 A
HDMI IN 2
34UM95-PE
HDMI IN 2
ENGLISH
Input Connector
DC-IN
(19 V
)
ON
H/P
HDMI IN 1
OFF
DC Switch
DP IN
USB UP
USB IN 1
5V
1.1 A
USB IN 2
5V
0.5 A
USB IN 3
5V
0.5 A
ASSEMBLING AND PREPARING
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation, regardless of its shape or size.
CAUTION
yy Avoid touching the monitor screen as much as
possible.
-- This may result in damage to the screen or
some of the pixels used to create images.
yy Place the monitor in the original box or packing material before attempting to move it.
yy Before moving or lifting the monitor, disconnect the power cord and all other cables.
yy Hold the bottom and side of the monitor frame
firmly. Do not hold the panel itself.
yy If you use the monitor panel without the stand
base, its joystick button may cause the monitor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
yy When holding the monitor, the screen should
face toward you to prevent it from being
scratched.
yy When transporting the monitor, do not expose
the monitor to shock or excessive vibration.
yy When moving the monitor, keep it upright and
never turn the monitor on its side or tilt it sideways.
ENGLISH
Moving and Lifting the
Monitor
7
8
ASSEMBLING AND PREPARING
ENGLISH
Installing the Monitor
or
Assembling the Stand
1 Place the screen face down.
100 mm
Screw Cover
Stand Hinge
CAUTION
yy To protect the screen from scratches, cover
the surface with a soft cloth.
2 Mount the stand base onto the stand hinge
as shown in the illustration. Fix two screws
into the back of the stand base and close the
screw cover.
Stand Base
120 mm
CAUTION
yy The stand height is adjustable by 20 mm
yy When tightening the screws after mounting
the stand base onto the stand hinge, be sure
to hold the stand base with your hand. Otherwise, the product may fall, causing personal
injury or damage to the product.
yy Be careful not to hurt your hand on the edges
of the screw covers.
yy Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be covered by the product warranty.
yy If you use the monitor panel without the
stand base, its joystick button may cause the
monitor to become unstable and fall, resulting in damage to the monitor or human injury.
In addition, this may cause the joystick button
to malfunction.
ASSEMBLING AND PREPARING
9
Detaching the Stand
Stand Base
CAUTION
yy To protect the screen from scratches, cover
the surface with a soft cloth.
2 Detach the screw cover from the stand base
as shown in the illustration and then remove
the two screws on the back to detach the
stand base from the hinge.
CAUTION
Screw Cover
yy Illustrations in this document represent typical
procedures, so they may look different from
the actual product.
yy Do not carry the monitor upside down by just
holding the base. This may cause the monitor
to fall off the stand and could result in personal
injury.
yy When lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
yy If you use the monitor panel without the stand
base, its joystick button may cause the monitor to become unstable and fall, resulting in
damage to the monitor or human injury. In
addition, this may cause the joystick button to
malfunction.
yy When removing the screws to detach the
stand base from the hinge, be sure to hold
the stand base with your hand. Otherwise, the
product may fall, causing personal injury or
damage to the product.
ENGLISH
1 Place the screen face down.
10
ASSEMBLING AND PREPARING
ENGLISH
Installing on a Table
Cautions When Connecting Power Cord
1 Lift the monitor and place it on the table in an
upright position. Place the monitor at least
10 cm away from the wall to ensure sufficient
ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
3 Press the joystick button on the bottom of the
monitor to turn on the monitor.
CAUTION
yy Unplug the power cord before moving or
installing the monitor. There is risk of electric
shock.
220 V
110 V
yy Make sure to use the power cord that is provided in the product package and connect it to
a grounded power outlet.
yy If you need another power cord, please contact your local dealer or the nearest retail
store.
ASSEMBLING AND PREPARING
11
Tidying up Cables
1 Place the monitor mounted on the stand base
Tidy up cables using the cable holder on the stand
base as shown in the illustration.
2
in an upright position.
Adjust the angle of the screen. The angle of
the screen can be adjusted forward or backward from -5° to 15° for a comfortable
viewing experience.
15
Rear
-5
Front
NOTE
WARNING
yy When you adjust the angle, do not hold the
stand as shown on the following illustration.
You may injure your fingers.
yy Cables can get caught in the hinge area as
shown in the illustration, so be careful when
organizing cables.
15
15
yy Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
-5
-5
ENGLISH
Adjusting the Angle
ENGLISH
12
ASSEMBLING AND PREPARING
Installing the Wall Mount Plate
Installing on the Wall
This monitor meets the specifications for the wall
mount plate or other compatible devices.
1 Place the screen face down. To protect the
screen from scratches, cover the surface with
a soft cloth.
2 Attach the clear sheet to the back of the monitor and align it with the screw holes.
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from
your local retail store. Alternatively, please refer
to the manual for how to install and set up a tilting
wall mounting bracket.
Clear sheet
(PET sheet)
10 cm
10 cm
10 cm
3 Place the wall mount plate onto the monitor
4
and align it with the screw holes.
Tighten the four screws to fix the plate to the
monitor using a screwdriver.
NOTE
yy The wall mount plate is sold separately.
yy For more information on installation, refer to
the wall mount plate's installation guide.
yy Be careful not to apply too much force while
mounting the wall mount plate as it may cause
damage to the screen
10 cm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1 If you use screws longer than the standard
2
length, it may damage the inside of the product.
A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Electronics is not liable for any accidents relating
to the use of non-standard screws.
ASSEMBLING AND PREPARING
100 x 100
M4 x 10 mm
4
RW120
yy Wall Mount (A x B)
A
B
NOTE
yy Use the screws specified by VESA standards.
yy The wall mount kit includes the installation guide
and all necessary parts.
yy The wall mounting bracket is optional. You can
obtain optional accessories from your local dealer.
yy The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper
length.
yy For more information, please refer to the user
manual for the wall mounting bracket.
CAUTION
yy Unplug the power cord before moving or installing the monitor to avoid electric shock.
yy Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling off,
which could lead to injury. Use an authorized LG
wall mount and contact the local dealer or qualified personnel.
yy Applying excessive force when tightening
screws may cause damage to the monitor. Damage caused in this way will not be covered by
the product warranty.
yy Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by
the use or misuse of inappropriate components
will not be covered by the product warranty.
yy To prevent injury, this apparatus must be
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)
yy When measured from the back of the monitor,
the length of each installed screw must be 8 mm
or less.
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm
ENGLISH
Wall Mount (A x B)
Stand Screw
Required Screws
Wall Mount Plate
(Optional)
13
14
ASSEMBLING AND PREPARING
ENGLISH
Using the Kensington Lock
The connector for the Kensington security system
is located at the back of the monitor.
For more information on installation and usage,
refer to the Kensington lock owner's manual or visit
the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
yy The Kensington security system is optional.
You can obtain optional accessories from most
electronics stores.
Using the Monitor
USING THE MONITOR
15
Connecting to a PC
ENGLISH
yy This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a
device to your computer without having to reconfigure anything or install any manual drivers.
yy The following instructions are based on the
34UM95-PD model. Illustrations in this manual
may differ from the actual product.
Press the joystick button, go to Menu → Easy control → Input, and then select the input option.
HDMI Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor
using the HDMI cable as shown in the illustration
below.
CAUTION
HDMI IN 2
yy Do not press the screen for a prolonged time.
This may cause image distortion.
yy Do not display a still image on the screen
for a prolonged time. This may cause image
retention. Use a screensaver if possible.
DC-IN
(19 V
)
H/P
DP IN
HDMI IN 1
NOTE
yy When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a
grounded power outlet.
yy The monitor may flicker when turned on in
an area where the temperature is low. This is
normal.
yy Sometimes red, green or blue spots may appear on the screen. This is normal.
HDMI IN 2
HDMI IN 2
CAUTION
yy Connecting your PC to the monitor using the
HDMI cable may cause device compatibility
DC-INissues.
USB UP
H/P
(19 V
)
DP IN
IN 1
to HDMI
/ DP(DisplayPort)
to
yy Using a DVIHDMI
HDMI cable may cause compatibility issues.
USB IN 1
5V
1.1 A
DC-IN
(19 V
)
US
5V
H/P
16
Thunderbolt ( ) Connection
Transmits digital video and audio signals from your
PC to the monitor. Connect the monitor to your PC
using the display port cable as shown in the illustration below:
You can connect your high-resolution display or
high-performance data device to the monitor via a
Thunderbolt port. Connect your external device to
the monitor using the Thunderbolt cable as illustrated below.
DC-IN
(19 V
)
H/P
USB IN 2
5V
0.5 A
USB IN 3
5V
0.5 A
HDMI IN 1
DP IN
HDMI IN 2
HDMI IN 2
DisplayPort Connection
USB IN 1
5V
1.1 A
ENGLISH
USB UP
Using the Monitor
USB
UP
DC-IN
(19 V
)
USB IN 1
USB IN 2
5V
1.1 A HDMI
5 V IN
0.5 1
A
USB IN 3
5 V DP
0.5 AIN
USB UP
USB IN 1
5V
1.1 A
USB IN 2
5V
0.5 A
USB IN 3
5V
0.5 A
(sold separately)
N2
.5 A
USB IN 3
5V
0.5 A
DP OUT
NOTE
NOTE
MI IN 2
HDMI IN 1
DC-IN
(19 V
)
H/P
HDMI IN 1
DP IN
USB UP
yy The maximum data transmission rate of each
port is 20 Gb/s.
yy Make sure to use a Thunderbolt ( ) certified
cable. Otherwise, this may cause the device to
malfunction.
supported in such environyy Thunderbolt ( ) is DC-IN
(19 V
)
DP IN
1
ments as Windows
7, Windows
8HDMI
andINNew
Mac Pro (Over Mac OS 10.9.1).
yy The ASM driver on the Owner's Manual CD
must be installed to use the Thunderbolt ( )
port.
yy The ability to set up dual monitors using the
Thunderbolt ( ) and daisy-chaining technology
depends on the performance of your video
card.
HDMI IN 2
yy There may be no video or audio output depending on the DP (DisplayPort) version of the
PC.
yy For using Mini DP to DP (Mini DisplayPort to
DisplayPort) cable,
it is recommended that you
USB UP
USB IN 1
USB IN 2
USB IN 3
DP IN
5V
1.1 A
5V
0.5 A
5V
0.5 A
use DisplayPort 1.2 cable.
USB IN 1
5V
1.1 A
USB IN 2
5V
0.5 A
USB IN 3
5V
0.5 A
Using the Monitor
MI IN 1
USB UP
DP IN
USB IN 1
5V
1.1 A
USB IN 2
5V
0.5 A
HDMI/DP (DisplayPort) connection
USB IN 3
5V
0.5 A
DP OUT
The USB port on the product functions as a USB
hub.
DP IN
USB IN 3
5V
0.5 A
(sold separately)
ENGLISH
To use USB 3.0, connect the A-B type USB 3.0
cable of the product to the PC.
Peripheral devices connected to the USB IN port
can be controlled fromHDMI
the 2PC. AUDIO IN (PC) USB UP
USB Cable connection - PC
NOTE
HDMI IN 2
yy Make sure to install the most recent Windows
OS service pack before using the product.
sold separately.
yy Peripheral devices are
DC-IN
H/P
)
HDMI
device
can IN
be1
yy A keyboard, mouse,(19orV USB
connected to the USB port.
USB IN 1
5V
1.1 A
USB UP
USB IN 2
5V
0.5 A
5V
USB UP
DP IN
USB IN 1
5V
1.1 A
USB IN 1
H/P
0.9 A
USB IN 2
5V
0.5 A
USB IN 2
5V
0.9 A
USB IN 3
5V
0.5 A
(sold separately)
USB IN 3
5V
0.5
A
Cautions When
Using
a USB Device
yy A USB device with an automatic recognition
program installed, or that uses its own driver,
may not be recognized.
yy Some USB devices may not be supported or
may not work properly.
yy It is recommended to use a USB hub or hard
disk drive with power supplied. (If the power
supply is not adequate, the USB device may
not be recognized properly.)
Since
USB
IN 2USB
and
3 only support USB 2.0,
yyUSB
IN 1
USB IN 2
IN 3
5 Vit may
1.1 A
5 V work
0.5 A
5when
V
0.5 A USB 3.0 devices are
not
connected.
HDMI 1/ MHL
DVI-D IN
CAUTION
USB UP
Thunderbolt ( ) connection
Peripheral devices connected to the USB IN port
can be controlled from the PC.
If you change the input on the menu while a device
is in connection via the Thunderbolt port, then the
device in connection via the USB port may not
work properly.
USB IN 3
5V
0.5 A
DC-IN
(19 V
)
HDMI IN 2
(sold separately)
HDMI IN 2
N2
.5 A
Connecting Peripherals
17
DC-IN
(19 V
)
HDMI IN 1
DP IN
H/P
HDMI IN 1
USB UP
USB UP
DP IN
USB IN 1
5V
1.1 A
(sold separately)
USB IN 2
5V
0.5 A
USB IN 3
5V
0.5 A
USB IN 1
5V
1.1 A
USB IN 2
5V
0.5 A
HDMI IN 2
Using the Monitor
DC-IN
)
(19 V
H/P
HDMI IN 1
DP IN
Connect peripherals to the monitor via the headphones port. Connect as illustrated.
HDMI IN 2
ENGLISH
Connecting Headphones
DC-IN
)
(19 V
H/P
HDMI IN 1
USB UP
DP IN
USB IN 1
1.1 A
5V
USB IN 2
0.5 A
5V
USB IN 3
0.5 A
5V
DP OUT
(sold separately)
yy Peripheral devices are sold separately.
yy If you use Angled earphones, it may cause
a problem with connecting another external
device to the monitor. Therefore, it is recommended to use Straight earphones.
Angled
HDMI IN 2
NOTE
DC-IN
)
(19 V
H/P
USB UP
DP IN
HDMI IN 1
USB
5V
Straight
yy Depending on the audio settings of the PC
and external device, headphones and speaker
functions may be limited.
)
HDMI IN 1
DP IN
USB UP
USB IN 1
1.1 A
5V
USB IN 2
0.5 A
5V
USB IN 3
0.5 A
5V
HDMI IN 2
IN
18
DC-IN
)
(19 V
H/P
HDMI IN 1
Installing the LG Monitor Software
19
INSTALLING THE LG MONITOR SOFTWARE
1 Set up Internet Explorer as the default web
browser.
3 Follow the instructions to proceed with the
installation.
4 Check the I accept the terms of the agree2 Click LG Monitor Software on the CD's main
ment checkbox on the License Agreement
screen and then click the Next button.
screen. When the file download window appears, click Run. (Although the screen below
may differ depending on your operating system or Internet Explorer version, the installation methods are the same.)
5 Select the program that you want to install.
CAUTION
yy Windows 7 must be updated to Service Pack
1 or higher.
ENGLISH
Insert the software CD included in the product packaging into your PC's CD drive and install the LG Monitor
Software.
20
Installing the LG Monitor Software
ENGLISH
NOTE
yy Screen Split This program automatically splits
the program window as desired.
yy True Color Finder This program calibrates the
precise color output of the monitor to suit your
needs.
9 The program you selected on the Select Features page will install automatically.
6 The LG Monitor Software starts the installation
as shown below:
10 When the installation is complete, restart your
system.
7 If the ASM driver has not been installed, the
driver will be installed automatically.
8 If the TUSB3410 driver has not been installed,
the driver will be installed automatically. Select
Install this driver software anyway (I) if the
Windows security message is displayed as below.
Installing the LG Monitor Software
NOTE
yy Right-click the True Color Finder icon and
select Start Program to start the program.
NOTE
yy To use the True Color Finder function, you
must purchase the supported calibrator.
yy For details on supported calibrators and
graphic cards, see the True Color Finder user
guide.
yy If you have changed the input port, it is recommend that you calibrate the monitor's picture
quality again.
NOTE
yy When you run Screen Split, the Screen Split
] appears in the system tray at the
icon [
bottom right of the PC screen.
yy Right-click the Screen Split icon and select the
desired layout.
CAUTION
yy Once you have completed the monitor calibration with the True Color Finder software,
remove the calibrator from the monitor and
store it at room temperature away from direct
sunlight or put it in the box.
- If the calibrator's measuring part is exposed
to direct sunlight for a long time, this may
cause damage to the calibrator.
- Do not store it in an environment with too
low/high temperature and high humidity.
yy If any third-party calibration application is already installed on your PC, the image quality
may be affected by a conflict between the two
applications. For the best performance, it is
recommended to uninstall the other calibration
application.
ENGLISH
yy When you run the True Color Finder software,
the True Color Finder icon [ ] appears in
the system tray at the right bottom of the PC
screen.
21
22
User Settings
ENGLISH
USER SETTINGS
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Joystick
Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Main menu enabled
Exits the main menu.
(Holding down the button to turn off the monitor: You can turn off
the monitor this way at any time, including when the OSD is on)
◄
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
►
Main menu disabled Adjusts the monitor volume level.
Main menu enabled
▲
Enters the PBP feature.
Main menu disabled Enables the main menu.
Main menu enabled
▼
Enters the menu features.
Enters the reader feature.
Main menu disabled Enables the main menu.
Main menu enabled
Turns off the monitor.
Main Menu Features
Main Menu
Reader
Menu
Exit
PBP
Monitor off
Long press: Monitor off
Description
Menu
Configures the screen settings.
Reader
Adjusts color for comfortable text file reading.
PBP
Displays the screens of two input modes on one monitor.
Monitor off
Turns off the monitor.
Exit
Exits the main menu.
User Settings
23
User Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the
Menu.
Configure the options by moving the joystick up/down/left/right.
2
3 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
4 If you want to exit the OSD menu, move the joystick to ◄ until you exit.
yy When you enter the menu, instructions on how to use the button will appear in the bottom right corner
of the screen.
Easy control
Function
PBP
Screen
Settings
Reset
Each option is described below.
Menu
Easy control
Brightness
Contrast
Volume
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
NOTE
yy You can adjust Mute/ Unmute by moving the joystick button to ▼ in the Volume
menu.
Input
Selects the input mode.
Ratio
Adjusts the aspect ratio of the screen.
Function
Adjusts SUPER ENERGY SAVING, Calibration and Picture Mode.
PBP
PBP
Displays the screens of two input modes on one monitor.
Screen
Picture
Adjusts the Sharpness, Black level and Response Time of the screen.
Color
Adjusts Gamma, Color Temperature, Red, Green, Blue and Six Color.
Settings
Adjusts Language, Power LED, Automatic Standby, DisplayPort 1.2 and OSD Lock.
Reset
◄
Restores the default settings.
Exit
Exits the OSD menu.
ENGLISH
Menu Settings
24
User Settings
ENGLISH
Ratio
1
Easy control
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Easy control > Ratio by moving the joystick.
2
3 Configure the options following the instructions that appear
4
5
100
>
Contrast
70
>
Volume
30
>
Input
HDMI
>
Ratio
Wide
>
Brightness
in the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Easy control
Function
PBP
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Easy control > Ratio
Description
Wide
Displays the video in widescreen, regardless of the video signal input.
Original
Displays video according to the aspect ratio of the video signal input.
Cinema 1
Enlarges the screen with an aspect ratio of 21:9. (at 1080p)
Cinema 2
Enlarges the screen with an aspect ratio of 21:9, including the black box at the
bottom for subtitles. (at 1080p)
1:1
The aspect ratio is not adjusted from the original.
NOTE
yy The display may look the same for Wide, Original, and 1:1 options at the recommended resolution
(3440 x 1440).
yy The ratio is disabled in the interlaced signal.
25
User Settings
Function
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Function by moving the joystick.
Easy control
Low
>
Off
>
Custom
2
3 Configure the options following the instructions that appear in
>
the bottom right corner.
Calibration
Picture Mode
Function
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Function
SUPER ENERGY
SAVING
Calibration
Description
High
Saves energy using the high-efficiency SUPER ENERGY SAVING feature.
Low
Saves energy using the low-efficiency SUPER ENERGY SAVING feature.
Off
Disables the SUPER ENERGY SAVING feature.
On
Enables the calibration applied to the monitor.
Off
If it is set to Off, the monitor reverts back to the picture quality set before calibration.
NOTE
yy Run the True Color Finder program.
Picture Mode
Custom
Allows the user to adjust settings. You can adjust the color mode of the main
menu.
Photo
Optimizes the screen for photos.
Cinema
Optimizes the screen for videos.
Game
Optimizes the screen for games.
ENGLISH
1
Function
SUPER ENERGY SAVING
26
User Settings
ENGLISH
PBP
1
PBP
PBP
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to PBP by movingthe joystick.
2
3 Configure the options following the instructions that appear in
4
5
Easy control
Off
>
>
Input
Audio
HDMI1
Function
>
Swap
Sub Full
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
PBP
>
Ratio
Screen
Settings
PBP Preview
Reset
HDMI1
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > PBP
PBP
Description
Displays the screens of two input modes on one monitor.
PBP Connection
Main
Screen
(Left)
Input
Sub Screen (Right)
HDMI 1
HDMI 2
DisplayPort
Thunderbolt ( )
HDMI 1
-
O
X
X
HDMI 2
O
-
X
X
DisplayPort
O
O
-
X
Thunderbolt ( )
O
O
X
-
Main
Selects the video signal input of the main screen.
Sub
Selects the video signal input of the sub screen.
Audio
Changes the audio output in PBP mode.
Swap
Toggles between the main screen and sub screen in PBP mode.
Sub Full
Converts the sub screen in PBP mode to wide screen.
Ratio
Adjusts the aspect ratio of the main screen or sub screen.
Main
Sub
Wide
Displays the video to fit the PBP screen, regardless of the
video signal input.
Original
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
Wide
Displays the video to fit the PBP screen, regardless of the
video signal input.
Original
Displays the video in the aspect ratio of the video signal input
on the PBP screen.
NOTE
yy When the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled. The
Main/Sub options for Ratio become disabled if there is no signal.
User Settings
Picture
Screen
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Screen > Picture by moving the joystick.
2
3 Configure the options following the instructions that appear in
Easy control
Picture
>
Color
>
Function
the bottom right corner.
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Screen > Picture
Description
Sharpness
Adjusts the sharpness of the screen.
Black Level
Sets the offset level (for HDMI only).
• Offset: as a reference for a video signal, this is the darkest color the monitor can display.
Response Time
High
The picture of the screen gets brighter.
Low
The picture of the screen gets darker.
Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Middle. For a fast-moving picture, it is
recommended that you use high.
Setting to High may cause image sticking.
High
Sets the response time to High.
Middle
Sets the response time to Middle.
Low
Sets the response time to Low.
Off
Does not use the response time improvement feature.
ENGLISH
1
27
28
User Settings
ENGLISH
Color
Screen
1 To view the OSD menu, press the joystick button at the
Easy control
bottom of the monitor and then enter the Menu.
Go to Screen > Color by moving the joystick.
2
3 Configure the options following the instructions that appear in
Picture
>
Color
>
Function
the bottom right corner.
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Screen > Color
Description
Gamma
Custom gamma settings: When using the gamma 0, gamma 1 and gamma 2 monitor settings, higher gamma settings mean a brighter image is displayed and vice versa.
Color Temp
Custom
Selects the factory default picture color.
Warm
Sets the screen color to a reddish tone.
Medium
Sets the screen color to between a red and blue tone.
Cool
Sets the screen color to a bluish tone.
Red
You can customize the picture color using Red, Green and Blue colors.
Green
Blue
Six Colors
Meets the user requirements for colors by adjusting the tone and saturation of the six colors
(red, green, blue, cyan, magenta and yellow) and then saving the settings.
Hue
Adjusts the tone of the screen colors.
Saturation Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the more saturated
and darker the colors become.
Reset
Returns color to the default settings.
29
User Settings
Settings
Settings
bottom of the monitor and then enter the Menu.
Go to Settings by moving the joystick.
2
3 Configure the options following the instructions that appear in
5
the bottom right corner.
To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Easy control
>
Power LED
On
>
Automatic
Standby
Off
Function
>
Disable
>
Off
>
DisplayPort 1.2
OSD Lock
PBP
Screen
Settings
Reset
▲/▼: Move
/ ►: OK
◄: Back
Each option is described below.
Menu > Settings
Description
Language
Sets the menu screen to the desired language.
Power LED
Turns the power LED on the front of the monitor on or off.
On
The power LED turns on automatically.
Off
The power LED turns off.
Automatic
Standby
Feature that automatically turns off the monitor when there is no movement on the screen for a
period of time.
DisplayPort 1.2
Enables or disables DisplayPort 1.2.
NOTE
yy Be sure to configure this option according to the DisplayPort version supported by your
graphics card. Set this option to Disable if your graphics card does not support DisplayPort
1.2.
yy In order to use 10 bit color in 3440 X 1440 @ 60 Hz, must be set to Enable DisplayPort 1.2.
Enable
Enables DisplayPort 1.2
Disable Disables DisplayPort 1.2
OSD Lock
Prevents incorrect key input.
On
Disables key input
Off
Enables key input
NOTE
yy All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings
and the Exit button.
ENGLISH
1 To view the OSD menu, press the joystick button at the
4
English
Language
30
User Settings
ENGLISH
Reset
1
Reset
Do you want to reset your settings?
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
Go to Reset by moving the joystick.
Easy control
2
3 Configure the options following the instructions that appear in
the bottom right corner.
Reset
Cancel
Function
PBP
4 To return to the upper menu or set other menu items, move
5
the joystick to ◄ or pressing ( / OK) it.
If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Screen
Settings
Reset
▲/▼: Move
Each option is described below.
Menu > Reset
Description
Do you want to reset your settings?
Reset
Restores the default settings.
Cancel
Cancel the reset.
/ ►: OK
◄: Back
User Settings
Reader
31
Reader Mode
Reader 1
Reader 2
◄ / ► : Change Mode
Reader Off
: OK
Each option is described below.
Reader Mode
Description
Reader 1
Optimizes the screen for browsing newspapers. You can brighten the screen in the OSD menu.
Reader 2
Optimizes the screen for looking at cartoons. You can brighten the screen in the OSD menu.
Reader Off
Reader Mode is off.
ENGLISH
1 Press the joystick button on the bottom of the monitor.
2 Go to Reader by moving the joystick button to ▲.
3 Configure the options following the instructions that appear in the bottom.
ENGLISH
32
Troubleshooting
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor's power cord
yy Check if the power cord is correctly plugged into the power outlet.
plugged in?
Is the power LED on?
yy Check the power cable connection and press the power button.
Is the power on and the power
LED displaying white?
Is the power LED blinking?
Is the OUT OF RANGE message being displayed?
Is the No Signal message being displayed?
yy Check that the connected input is enabled (Menu - Input).
yy If the monitor is in sleep mode, move the mouse, or press any key
on the keyboard, to switch the display on.
yy Check if the computer is turned on.
yy This occurs when signals transferred from the PC (video card) are
out of the horizontal or vertical frequency range of the monitor.
Please see the Product Specification section of this manual to set
the appropriate frequency.
yy This is displayed when the signal cable between the PC and the
monitor is missing or disconnected. Check the cable and reconnect
it.
The 'OSD Locked' message is being displayed.
Are some functions not availyy The OSD is locked. Go to Menu > Settings and set OSD Lock to Off.
able when you press the Menu
button?
The screen retains an image.
Does image sticking occur even
when the monitor is turned off?
yy Displaying a still image for a prolonged time may cause damage to
the screen, resulting in the retention of the image.
yy To extend the lifetime of the monitor, use a screensaver.
Screen display is unstable and shaky / Images displayed on the monitor leave shadow trails.
Did you select the appropriate
yy If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the
resolution?
screen may be flickering. Change the resolution to 1080P or the
recommended resolution.
NOTE
yy Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per
second, like a fluorescent lamp. The number of times the screen is refreshed per second is called
vertical frequency, or refresh rate, and is represented by Hz.
yy Horizontal Frequency: The time it takes to display one horizontal line is called the horizontal cycle. If
1 is divided by the horizontal interval, the result is the number of horizontal lines displayed per second.
This is called horizontal frequency and is represented by kHz.
Troubleshooting
33
NOTE
The display color is abnormal.
Does the display appear discolored (16 colors)?
Does the display color appear
unstable or monochrome?
Are there spots on the screen?
yy Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality.
yy Check if the signal cable is connected properly. Reconnect the cable
or reinsert the PC's video card.
yy When using the monitor, pixilated spots (red, green, blue, white or
black) may appear on the screen. This is normal for an LCD screen.
It is not an error, nor is it related to the monitor's performance.
ENGLISH
yy Check if the video card's resolution or frequency is within the range allowed by the monitor and set it to
the recommended (optimal) resolution in Control Panel > Display > Settings.
yy Not setting the video card to the recommended (optimal) resolution may result in blurred text, a dimmed
screen, a truncated display area or misalignment of the display.
yy The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the video card. If this is the case, contact
the manufacturer of the computer or video card for assistance.
yy Some video cards may not support 3440 x 1440 resolution. If the resolution cannot be displayed, contact the manufacturer of your video card.
ENGLISH
34
Product Specification
PRODUCT SPECIFICATION
LCD Screen
Type
Color Depth
Pixel Pitch
Resolution
Video Signal
Input Connector
Power Sources
AC/DC Adapter
Stand Angle
87 cm TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Screen
Diagonal length of the screen: 87 cm
HDMI IN 1 / HDMI IN 2 /
8-bit color is supported.
Thunderbolt ( )
DP (DisplayPort)
10-bit color is supported.
0.2325 mm x 0.2325 mm
HDMI
Max Resolution
Recommended Resolution
Max Resolution
DisplayPort
Recommended Resolution
Max Resolution
Thunderbolt ( )
Recommended Resolution
Horizontal Frequency 30 kHz to 90 kHz
Vertical Frequency
56 Hz to 61 Hz
Synchronization
Separate Sync.
3440 x 1440 @ 50 Hz
3440 x 1440 @ 50 Hz
3440 x 1440 @ 60 Hz
3440 x 1440 @ 60 Hz
3440 x 1440 @ 60 Hz
3440 x 1440 @ 60 Hz
HDMI IN 1, HDMI IN 2, DP (DisplayPort) IN, H/P OUT, Thunderbolt ( ), USB UP,
USB IN 1, 2, 3
Power Rating
19 V
6.5 A
Power Consumption Operating Mode: 80 W (Typical, USB excluded)
(Typical)
100 W (Max, USB included, Audio Output 50%)
Sleep Mode ≤ 1.2 W
Off Mode ≤ 0.5 W (Only 34UM95-PD, 34UM94-PD)
Off Mode ≤ 0.3 W (DC switch is off. (Only 34UM95-PE))
LCAP31 type, manufactured by Lienchang
Output: 19 V
7.37 A
Forward/Backward: -5° to 15° (Head)
Environmental
Conditions
Operating Conditions Temperature: 10°C to 35°C
Humidity: 10% to 80%
Storing Conditions
Temperature: -20°C to 60°C
Humidity: 5% to 90%
Audio Output
7W+7W
Supported
Win XP, Win Vista, Win 7, Win 8, New Mac Pro (Over Mac OS 10.9.1)
Operating System Thunderbolt ( )
Win 7, Win 8, New Mac Pro (Over Mac OS 10.9.1)
Dimensions
Weight (Without
Packaging)
Monitor Size (Width x Height x Depth)
With Stand
829.9 mm x 468.9 mm x 172.9 mm
Without Stand
829.9 mm x 379.8 mm x 82.9 mm
With Stand
7.7 kg
Without Stand
6.7 kg
Specifications are subject to change without notice.
Product Specification
35
Preset Mode
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Polarity (H/V)
640 x 480
31.469
59.94
-/-
800 x 600
37.879
60.317
+/+
1024 x 768
48.363
60
-/-
1152 x 864
54.347
60.05
+/+
1280 x 720
45
60
+/+
1280 x 1024
63.981
60.02
+/+
1600 x 900
60
60
+/+
1680 x 1050
65.29
59.954
-/+
1920 x 1080
67.5
60
+/-
2560 x 1080
66.7
60
-/+
3440 x 1440
43.82
29.99
+/+
3440 x 1440
73.68
49.99
+/+
3440 x 1440
88.82
59.97
+/+
Power LED
Mode
LED Color
On Mode
White
Sleep Mode
Flashing White
Off Mode
Off
Remarks
HDMI is not supported.
ENGLISH
Factory Support Mode
(Preset Mode, HDMI/DisplayPort/Thunderbolt PC)
ENGLISH
36
PROPER POSTURE
PROPER POSTURE
Proper Posture for Using the Monitor
Adjust the screen so that you can comfortably look at it at a slight downward angle from your natural eye
level.
yy Take a break for approximately 10 minutes every hour to reduce any fatigue caused by prolonged
usage.
yy Adjust the stand angle from -5° to 15° to obtain the best view of the screen.
You should be looking
slightly down at the
screen.
Stand Angle
-5° to 15°
Adjust the position of
the screen to minimize reflections.
Place your hands gently
on the keyboard,
keeping your arms bent at
the elbows
and extended horizontally
in front of you.
This device meets the EMC requirements for
home appliances (Class B) and is intended
for home usage. This device can be used in
all regions. Read the owner's manual (CD)
carefully and keep it at hand. Please note that
the label attached to the product provides
information for technical support.
Model
Serial No.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency (EPA).
As an ENERGY STAR Partner LGE
U. S. A., Inc. has determined that
this product meets the ENERGY
STAR guidelines for energy
efficiency.
Refer to ENERGY STAR.gov for more
information on the ENERGY STAR program.
Download PDF