7792769 MFL6

WORK

SEC.

69

1

BRAND

LG

2

MODEL

3

P/NO.

T2312VSAM

T2310VSAL

T23 95 VSAW

T2385VSAW

T2308VSAM

T2312VSAL

T2310VSAM

MFL67792769

4

Rev No.

00 (170328)

0 1 (170 627 )

1

2

3

4

Revise contents on page 8,14,15,16,19,39 EDXH600150 07/05/2017 D.T.Son

DM.Kim

MATERIAL AND PRINTING DESCRIPTION

SNOW WHITE 70 g OFFSET

LG MODEL SUFFIX LANG.

T8566NEDVJ

T8566NEDVF

T8566NEDV

T8566NEDVC

T8566NEDVJ

T8566NEDVF

T8566NEDVJ

ASFPABN

AFSGGSC

ABWGGSC

ABWGGSC

ASFGGSC

AFSREML

ASFREML

ENG

PAGE REMARK

40

<FRONT>

<BACK>

148.5

Page Cover

Page Cover

Note

1.Material : : Printing and exterier size are refer to work table

2.Print

: Print with Paper size A5

3.Exterier size on the drawing is cutting line A5

Snow white Paper (70 g/m )

2

4.Before product controlled by criteria sample.

5.This part should not contain prohibited substances

(Pb,Cd,Hg,Cr+6,PBB,PBDE) and details should comply with LG standard of TH-B-4501-15

T2312VSAM

T2310VSAL

T2309VSAW

T2385VSAW

T2308VSAM

T2312VSAL

T2310VSAM

MFL67792769

Rev. : 00(170328)

ข้อกำหนด

1 .

วัสดุท่ีใช้

:

ส่ิงพิมพ์ และ ขนาดท่ีตัดแล้ว ยึดตามท่ีได้ กำหนดไว้ กระดาษแบบ Snow white (70 g/m )

2

2 .

การพิมพ์

:

พิมพ์ขนาด

A5

หน้าหลัง ตามแบบท่ีกำหนดไว้

3 .

ขนาด

Cutting line

คือขนาดหลังทำการตัดแล้ว

4 .

ควรตรวจสอบคุณภาพ ของ ช้ินงานก่อนการผลิต

5 .

ช้ินงานน้ีจะไม่ใช้สารท่ีเป็นอันตราย

(Pb ,Cd ,Hg ,Cr +6 ,PBB ,PBDE )

และจะปฏิบัติตามมาตรฐาน

TH-B-4501-15

D.T.Son

17 / 03 / 28

D.K.Hung

17 / 03 / 28

T.Q.Thanh

17 / 03 / 30

D.M.Kim

17 / 03 / 31

MANUAL,OWNER'S

FOR Sapience ND D 23”

MFL67792769

OWNER’S MANUAL

WASHING

MACHINE

Please read this manual carefully before operating your washing machine and retain it for future reference.

T2312VSAM

T2310VSAL

T23 95 VSAW

T2385VSAW

T230 9 VSAM

T2312VSAL

T2310VSAM

MFL67792769

Rev. : 0 1 (170 6 2 7 )

www.lg.

com

Copyright © 2017 LG Electronics Inc. All rights reserved.

Washing Program

Quick Wash

FILTER MESH

Use this Program to get better rinsing performance .

School care Wash

Use this Program to wash School Uniform (refer to page 18)

When you select a wash Program the water level and the amount of detergent (to be used) will be shown on the control panel. The amount of a cup in the diagram is about 40 g for concentrated detergent.

The correct amount of Detergent will vary depending on the amount of soil in your clothes (Jeans and work clothes may need more Detergent, while bath towels usually need less.)

For liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.

Beeper Button(Only 1 Valve)

• If you want to use the washing machine without alarm signal sounds, press Beeper buttons allow you to select : High ▶ off

Low ▶ High respectively. Default setting is High.

(refer to page 25)

(refer to page 2 5 )

School Care

Extra Clean

Use for selecting Washing Program.

This button allows you to select 8 different

Program for different kinds of laundry and dirtiness.

Program selections light up in sequence as follows

School Care

Select the desired button.

W

ashing Program

Washing Program

Use Duvet Program when washing Jeans of different sizes.

Use this Program to increase ri n sing performance. This would include underwear and baby clothes. If someone has sensitive skin or skin trouble,use this Program.

program program program

18 W

ashing

Program

Washing Program

Use this Program to wash School Uniform.

Washing laundry with cycle that pre treats immediate stain without Hand - wash could be smelled badly without prompt laundry

1

Add the laundry

Program

Add the detergent

• Select the

School Care program on the

Control Panel.

• Add the appropriate quantity of Detergent as indicated by the Water Level. Or follow the

Detergent manufacturer’s instructions

1

• Select the program on the

Control Panel.

• Add the appropriate quantity of Detergent as indicated by the Water Level. Or follow the

Detergent manufacturer’s instructions

Close the lid Finish Caution & Note

mode can be used with Normal, Duvet , School Care , Extra Clean Program

Program button to select the washing program .

Tub Clean Program program.

When the wash program ends, the buzzer will ring for 10 seconds before the Power does off automatically

of water to be use, in these case, use this Program to clean inner tub and outer tub.

program.

Program

Before using this Program remov e lint inside lint fil ter.

When using this Program , do not place any laundry inside tub.

After using this Program , remove dir t inside fil ter.

Aft er finishing this Program , open the lid of wash to remove irritant odor.

Do not pour bleach into the tub directly. It might cause damage the tub.

Do not leave diluted oxygenated bleach inside tub for long time.

It rusts the tub must drain the remained diluted oxygenated water out.

Use this Program once for every month.

Do not use this Program repeatedly.

Program button to select the washing program.

Program

Select the Program for laundry on the Control panel. This

Program will not work in Wool and Tub Clean Program

3 Press the Rinse button and hold 3 seconds to select Child lock.

During the wash Program,all the buttons are locked until washing

How to Unlock

If you want to unlock during wash, press the Rinse button and hold 3 seconds again.

To change the direction of the hose,pull out the elbow hose and change the direction.

Repeat Step 1.

To Clean the Filter Mesh

If the filter mesh is torn or damaged, purchase a new one from LG service center

S

martDiagnosis

TM

1 Close the washer door, and press the POWER button.

• If you manipulated other button or dial before pressing Water

Level button, turn off the power and start again from the beginning.

2 Place the phone to SmartDiagnosis TM display.

• Make sure that the speaking side of the phone to face SmartDiagnosis display

TM

3 7

3 Long press Water L e vel button to activate smart diagnosis.

• Place the phone near the

SmartDiagnosis TM Display, and long press Water L ev el button until tak tak tak sound.

Note : Before pressing the Water

Level should turn the power button for reuse if you have made other operations. If under the condition

" CL" uninstall it, and reconnect the power

4 Hold the phone while data is transmitted.

• Keep placing phone to SmartDiagnosis TM display while data for smart diagnosis is being transmitted. The time remaining for data transmission will be displayed on screen.

• Transmission sound may be irritating. For proper diagnosis, do not take off the phone. You can press power button to stop diagnosis function and the sound.

5 After the data transmission is completed, listen to the diagnosis result from the consultant.

• When data transmission is completed, the power is automatically turned off with “End” display after a few seconds.

NOTE

Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting through service calls, The effectiveness of this feature depends upon various factors, including, but not limited to, the reception of the cellular phone being used for transmission, any external noise that may be present during the transmission, and the acoustics of the room where the machine is located. Accordingly, LG dose not guarantee that smart Diagnosis would accurately troubleshoot any given issue.

Noise or vibration that is considered normal for example water drain sound,spin sound or warning beeps.

Rate input

T2310VSAL T23 95 VSAW T2385VSAW T230 9 VSAM T2312VSAM T2312VSAL T2310VSAM

10.0kg

9.

5 kg 8.5kg

9 .0kg

12.0kg

12.0kg

10.0kg

220-240V, 60Hz 220-240V, 50Hz

200W

42 kg

M

emo

M

emo