LG | DK5946PT | LG DK5946PT Owner’s Manual

DVD PLAYER
OWNER'S MANUAL
MODEL
:
DK5946PT
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
WARNING
NOTES ON COPYRIGHTS:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
a
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
risk of electric
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
point
is intended to alert the
important operating
within
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
TRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION:
This
To
Digital
ensure
Video Disc
proper
use
Player employs
of this
a
Laser
product, please
System.
read this owner's
manual
carefully and retain for future reference should the unit
require maintenance, contact an authorized service location
(see service procedure).
Use of
controls, adjustments,
dures other than those
or
specified
the
performance of proceherein may result in haz-
ardous
radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
2
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
on
this unit. This number is
___________________________________
___________________________________
to
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
OperationwithAudioCDandMP3Discs.
PlayinganAudioCDandMP3Discs.
.
.
.
.
.
.
.
.
.
.
.
.
.18
.18
Pause.............................18
MovingtoanotherTrack...............18
RepeatTrack/All/Off..................18
Search.............................18
Random...........................18
RepeatA-B.........................18
3DSurround........................18
.
RemoteControl............................7
RearPanel................................8
.18
ChangingtheAudioChannel.
ProgrammedPlayback.....................19
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
andMP3Discs.........................19
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
Initial Settings General Operation.
12
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................12
Sound.............................13
ProgrammedPlaybackwithVideoCD.
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
.19
.19
AdditionalInformation...................20-22
LastConditionMemory...................20
ScreenSaver...........................20
VideoModeSetting......................20
HDCDPlayback.........................20
ControllingtheTV.......................20
UsingtheKaraokeFunction................21
NotesonMP3Discs.....................22
Others(DRC/PBC)...................13
ParentalControl......................14
Operation
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
GeneralFeatures........................15
Reference
Troubleshooting..........................23
SpeakerSettings..........................24
LanguageCodeList.......................25
CountryCodeList.........................26
Specifications............................27
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
.
.
.
.
.
SlowMotion.........................15
Still Picture and
Frame-by-Frame Playback
.
About the
16
symbols
for instructions
Search.............................16
Indicates hazards
Random...........................16
itself
Repeat............................16
RepeatA-B.........................16
Indicates
special operating
Indicates
tips
TimeSearch........................16
3DSurround........................16
or
likely to cause
damage.
harm to the unit
other material
and hints for
features of this unit.
making
the task easier.
Zoom..............................17
MarkerSearch.......................17
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitle............................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
can
play
a
HDCD, SVCD, CD-R
CD-RW that contains audio titles
or
accompanying
or
feature content
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
In addition, this unit
(DVD only)
DVD
or
MP3 files.
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Notes
--
Depending
on
the conditions of the
recording equip-
the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on the unit.
ment
--
or
The unit cannot
play
discs that contain data, other
Track
(Video
Sections of
a
CD and audio CD
picture
or a
audio CD. Each track is
or an
enabling
only)
piece
assigned
musical
on a
a
video CD
track number,
you to locate the track you want.
than MP3 and CD-DA data.
--
--
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
or
irregularly shaped
octagonal). It may result in
use
Notes
Some
on
CDs
(the
(e.g., heart-shaped
malfunctions.
DVDs and Video CDs
playback operations
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
you to locate the scene you want.
A scene is composed of one or several tracks.
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
designed by the software manufacturer,
playback features of the unit may not be available
Types
There
of video CDs
are
two
disc content
some
and still
moving pictures
types of video CDs:
Video CDs
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
other functions may be added.
Refer also to the instructions supplied with the DVDs
with the
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
system via
menus, search
functions,
or
still
other
pictures
included in
the disc.
code of the DVD player and DVDs
player is designed and manufactured
3
for playback of region "3" encoded DVD software. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "3" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
Regional
This DVD
Video CDs not
HDCD
(High
To avoid
on
DTS-encoded CDs
possible damage to the audio system, turn
down the volume before playing back such discs, adjust
the volume gradually, and keep the volume level low. To
enjoy DTS Digital SurroundTM playback, an external 5.1
channel DTS Digital SurroundTM decoder system must
be connected to the digital output of the unit.
4
equipped
same
Definition
Compatible Digital )
HDCD
(High Definition Compatible Digital ) is a
recording system that has improved audio CD sound
dynamic range, sound field reproducibility and vocal
acoustics.
This DVD
Note
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
player
is
equipped
with
an
The HDCD indicator illuminates when
HDCD-encoded audio CD.
HDCD decoder.
playing
an
in
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
turn off the
or
volatile
such
liquids,
contact with the unit for
leave marks
as
on
a
long period
light, as there may be a considerable
increase inside the car.
Cleaning
temperature
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
case.
insecticide spray,
or
To clean the cabinet
a
store the disc in its
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the exterior surfaces clean
use
the unit. Do not leave rubber
use a
discs
extremely dirty,
detergent
mild
solvents such
strong
as
a
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Display
Window
POWER
Forward
Switches the
player
ON and OFF.
Skip/Scan ( T / R )
chapter/track.
Go to NEXT
Press and hold for two seconds for
Standby indicator
Lights red when the player
in Standby mode (off).
a
fast forward search.
Skip/Scan ( Q / S )
chapter/track or to PREVIOUS
chapter/track.
Reverse
is
Go to
beginning
of current
Press and hold for two seconds for
a
fast
reverse
search.
STOP(9)
Stops playback.
Pause
PAUSE/STEP ( ; )
playback temporarily/ press repeatedly
for frame-by-frame playback.
PLAY(2)
playback.
Starts
Disc
Insert
a
Tray
OPEN/CLOSE
disc here.
Opens
or
closes the disc
( / )
tray.
/
/
MIC.1
MIC.2
VOL.1
MIN
VOL.2
MAX
MIN
MAX
Microphone volume controls
Adjusts microphone volume.
or
DVD
remote control here.
Player
window
Shows the current status of the
player.
to both sockets.
ANGLE active
Microphone
Point the DVD
Display
Microphone jacks (MIC1, MIC2)
a microphone to MIC1 or
Connect
MIC2
Remote Sensor
TITLE
is connected
Indicates current title number
CHP/TRK
Indicates current
chapter
or
track number
DVD inserted
Indicates total
CD Audio CD inserted
playing time/elapsed
time
VCD Video CD inserted
HD CD
PROG.
HDCD disc inserted
Programmed playback
active
MP3 MP3 disc inserted
RANDOM
Indicates current
player
RANDOM
playback
active
function:
Playback, Pause,
etc.
Indicates
mode
MP3 VCD HD CD DVD
6
TITLE
CHP/TRK
PROG.
RANDOM ALL AB
repeat
Remote Control
DVD/TV select button
Selects
OPEN/CLOSE
mode of remote
operational
Player
-
POWER
OPEN/CLOSE
-
DISPLAY
display
DVD
2
-
4
3
(left/right/up/down)
Selects
-
an
item in the
DISPLAY
changes
VOL
ENTER
Removes the
the
Displays
setup
menu.
of
menu
video CD
a
TV AV
-
Selects AUX A/V
channel.
input
VOL
MENU
SELECT/ENTER
TITLE
PR./CH
DVD disc.
turns off TV sound.
with PBC.
SELECT
volume of TV.
menu on a
-
PR./CH
MENU
Accesses
RETURN
menu
Selects channel of TV and
during
playback.
RETURN/TV AV
TV SOUND/MUTE
-
1
Selects 3D SURROUND
disc
ON and OFF.
Accesses On-Screen
tray.
SOUND/MUTE
POWER
Switches DVD
and closes the disc
Opens
control.
Acknowledges
SLOW PAUSE/STEP STOP
selection.
menu
SLOW
TITLE
ReverseSLOW(,)?
Reverse slow playback.
SKIP/SCAN
PLAY
available.
PAUSE/STEP ( ; )
playback temporarily/ press
repeatedly for frame-by-frame
playback.
?
PROGRAM
?
Pauses
?
REPEAT
A-B
MARKER SEARCH
RANDOM ZOOM
Selects
audio
an
KARAOKE
Selects
a
subtitle
a
DVD
camera
angle
setup
or removes
Marks any
Removes
if
or removes
?
Angle:
remote
track number
on
the
all.
sequence.
tracks in random order.
ZOOM
Enlarges
?
video
image.
KARAOKR
Remote control
Operation Range
Point the remote control at the remote
remote
a
RANDOM
battery
Detach the
press the buttons.
Distance: About 23 ft
menu.
A-B
Plays
?
menu.
Remote Control
program
REPEAT
Repeat
?
?
Accesses
or removes
Repeat chapter, track, title,
?
menu.
KARAOKE
track.
program menu or a mark on the
MARKER SEARCH menu.
?
point during playback.
MARKER SEARCH
or
CLEAR
?
SEARCH
Displays
)
?
menu.
MARKER
S
PROGRAM
?
Accesses
(
Press and hold button for about
Accesses
available
SETUP
)
chapter
two seconds.
?
language.
ANGLE
Selects
*
language (DVD) or
(CD).
SUBTITLE
Reverse SKIP/SCAN
previous chapter
a menu.
audio channel
an
T
Search backward*/ go to beginning
of current chapter or track or go to
0-9 number buttons
AUDIO
(
?PLAY(2)
Starts playback.
AUDIO SUBTITLE ANGLE SETUP
ForwardSLOW(.)?
Forward slow playback.
Forward SKIP/SCAN
Search forward*/ go to next
or track.
CLEAR
STOP(9)?
Stops playback.
Selects numbered items in
the discs Title menu, if
Displays
SKIP/SCAN
(7 m)
sensor
AAA AAA
from the front of the
About 30° in each direction of the front of the
battery
cover on
the
rear
of
the remote control, and insert two R03
(size AAA) batteries
aligned correctly.
and
sensor.
installation
with
and
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
sensor.
7
INTRODUC
Rear Panel
VIDEO OUTPUT Switch
Select either S-VIDEO OUT
or
COAXIAL
COMPONENT
(Digital audio out jack)
digital (coaxial) audio equipment.
Connect to
VIDEO OUT/PROGRESSIVE SCAN, depending on
how you connected the DVD Player to the TV.
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT
OPTICAL
(Y
Pb
Connect to
audio out
(Digital
jack)
digital (optical) audio
equipment.
Pr)
a
TV with Y Pb Pr
inputs.
Connect to
AUDIO OUT
Connect to
*System
Select switch
(Left/Right)
amplifier, receiver,
an
or
stereo
system.
DIGITAL
OUT
5.1CH AUDIO OUT
FRONT
VIDEO OUT
AUDIO
OUT
Pr
L
Pb
R
COMPONENT
REAR
L
COAXIAL
VIDEO
OUTPUT
DIGITAL
OUT
R
S-VIDEO
COMPONENT /
PROGRESSIVE
SCAN
OPTICAL
S-VIDEO
CENTER
Y
WOOFER
PROGRESSIVE
OUT
SCAN
VIDEO
OUT
S-VIDEO OUT
Connect to
a
TV with S-Video
inputs.
AC Power Cord
5.1 CHANNEL AUDIO OUT
Connect to
--
speaker
connection
connections
VIDEO OUT
connections
Connect to
Dust
protection
*
cap
Remove the dust
protection cap from the OPTICAL
DIGITAL OUT jack and connect the optical digital cable
(not supplied) securely so that the configurations of
both the cable and the connector match. Keep the dust
protection cap and always reattach the cap when not
using the connector to protect against dust intrusion.
System
You
NTSC
NTSC:
Select when DVD
by using System
appropriate system.
player is connected with
PAL-TV.
player
is connected with
player
is connected with
NTSC-TV.
Select when DVD
system
When the selected
picture
?
Set
off.
8
PAL discs
Select when DVD
coincide with the
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
or
PAL:
?
cap
inputs.
Select switch to choose the
Multi
protection
TV with video
a
Select switch
enjoy
can
AUTO:
Dust
source.
subwoofer connection
front speakers
(surround) speakers
--
rear
Plug
5.1 channel receiver
center
--
--
a
into the power
System
system
may not be
System
TV.
Select switch does not
of your TV, normal color
displayed.
Select switch when the power is turned
Connections
Progressive Scan (ColorStream
Tips
Depending
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
on
video resolution
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
best connections.
reproduction, connect
jacks to the audio in jacks
the
player's
1
of your
audio/video equipment.
amplifier, receiver, stereo or
See "Connecting to optional equipment" on
--
--
Make
the DVD
is connected
Player
system.
one
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
jacks on the DVD Player
corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
to a TV
of the
following connections, depending
on
Right
AUDIO OUT
to
TV
(A) using
the
supplied
of
jacks
2 the DVD Player to the audio left/right in jacks
on
the
audio cables.
Notes
--
--
Connecting
Make
possible.
Connect the Left and
directly to the
TV. Tune the TV to the correct video input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
"digital ready"
the
page 10.
Caution
--
or
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
System
For better sound
high-definition
television, you may take advantage of the DVD
Player's progressive scan output for the highest
described below.
AUDIO OUT
a
connection
pro)
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 12.
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
Rear of TV
the
capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT/PROGRESSIVE SCAN
jacks,
switch to COMPONENT. When
OUT
jack,
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
VIDEO
INPUT
AUDIO INPUT
set the VIDEO OUTPUT
Pr
the S-VIDEO
using
Pb
Y
R
L
L
set the VIDEO OUTPUT switch to
S-VIDEO.
Video connection
1
Connect the VIDEO OUT
the video in
jack
supplied (V).
on
jack on
using
the TV
Connect the Left and
Right
the DVD
Player
AUDIO OUT
jacks
2 the DVD Player to the audio left/right in jacks
TV
(A) using
the
supplied
to
the video cable
S
C
A
V
of
on
the
audio cables.
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
S-Video cable
jack
(S).
Connect the Left and
on
jack
the TV
on
the DVD
using
the
Player
supplied
(A) using
Component
1
the
Video
5.1CH AUDIO OUT
FRONT
REAR
Right
AUDIO OUT
jacks
supplied
OUTPUT
Pr
L
Pb
R
R
S-VIDEO
the
audio cables.
(Color Stream )
AUDIO
OUT
VIDEO
DIGITAL
OUT
of
on
VIDEO OUT
COMPONENT
L
COAXIAL
2 the DVD Player to the audio left/right in jacks
TV
DIGITAL
OUT
COMPONENT /
PROGRESSIVE
SCAN
OPTICAL
connection
Rear of DVD
S-VIDEO
OUT
CENTER
WOOFER
Y
PROGRESSIVE
SCAN
VIDEO
OUT
player
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
jacks on the DVD Player
corresponding
jacks on the TV using an
optional Y Pb Pr cable (C).
the
Connect the Left and
Right
AUDIO OUT
jacks
2 the DVD Player to the audio left/right in jacks
TV
to
in
(A) using
the
supplied
of
on
the
audio cables.
9
PREATION
Connections
Connecting
to
(Continued)
Optional Equipment
Notes
--
Connecting to an amplifier equipped with
channel analog stereo or Dolby Surround
Connect the Left and
two
jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the supplied
audio cables (A).
Right
AUDIO OUT
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--
To
see
screen
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
channel
Connect
1
one
of the DVD
DIGITAL AUDIO
Player's
OUT
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
Analog
display,
connection to
multi-channel A/V receiver
a
(Dolby Digital, DTS)
This DVD
Player contains a multi-channel decoder. This
playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
enables
Connect the CENTER and WOOFER
1
Center
and the Subwoofer
speaker
sponding in jacks
player's digital output.
Output" on page 13).
Digital
Multi-channel sound
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Connect the Left and
Right
FRONT
speaker jacks
on
your receiver.
Connect the Left and
3
(R)
4
Output
to the
Make the
Right REAR speaker jacks
corresponding in jacks on your receiver.
appropriate Sound settings for Analog
Speaker Settings in the setup menu.
and
See page 13.
Rear of DVD
player
DIGITAL
OUT
Caution:
Licensing agreement, the digital output
digital out when DTS audio stream is
5.1CH AUDIO OUT
FRONT
REAR
selected.
player
OPTICAL
DIGITAL
OUT
5.1CH AUDIO OUT
FRONT
REAR
VIDEO OUT
AUDIO
OUT
Pr
L
Pb
R
COMPONENT
VIDEO OUT
Pr
COAXIAL
DIGITAL
OUT
COAXIAL
VIDEO
OUTPUT
COMPONENT /
PROGRESSIVE
SCAN
Pb
S-VIDEO
CENTER
F
COMPONENT /
PROGRESSIVE
SCAN
OPT CAL
O
X
S-V DEO
CENTER
PROGRESSIVE
SAN
C
R
Y
WOOFER
PROGRESSIVE
OUT
SCAN
VIDEO
OUT
A
Center
Subwoofer
Front R
Rear R
Front L
Rear L
ANALOG 5.1CH
AUDIO INPUT
Amplifier (Receiver)
OPTICAL
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
10
L
R
AUDIO INPUT
R
Y
WOOFER
OUT
R
S-VIDEO
L
R
L
DIGITAL
OUT
AUDIO
OUT
VIDEO
OUTPUT
S-VIDEO
Rear of DVD
COMPONENT
L
Due to the DTS
will be in DTS
jacks for the
(C) to the corre-
your receiver.
on
2 (F) to the corresponding in jacks
A
on-
press AUDIO.
with 6 Channel connectors
You will need to activate the
2 (See "Digital Audio
the audio format of the current DVD in the
VIDEO
OUT
Before
Operation
Caution:
Before
the remote control, press the DVD
button to select the device to be operated.
using
General
or
TV
gives
DVD
Some DVDs
numbers
Temporary
operating the
Player.
require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
On-Screen
General
screen.
playback
TITLE
CHAPT
TRACK
can
be
(e.g.,
title
can
the
of
setting
item.
For
some
setting
functions,
setting.
Feedback Field Icons
Repeat
Title
Repeat Chapter
Repeat
Track
(non-PBC
Repeat
A-B
OFF
Repeat
Off
Resume
be
an
be also be used for
number).
Repeat
Action
display operation
Press DISPLAY
change
AB
displayed on the TV
changed on the menu.
can
to
All Tracks
ALL
Display
Some items
On-screen
1
basic instructions for
status
or 2
The number buttons
press SELECT/ENTER to execute the
Explanation
This manual
Press 1
3
play
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press
3 or 4
to select
an
item.
2 The selected item will be highlighted.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
1/12
Time search
Audio
language
Digital Audio
Output mode
0:16:57
1
ENG
and
Subtitle
language
Angle
D
6CH
OFF
1/1
Sound
VCD2.0
titles,
NORM.
skips
to the desired title number.
Shows the current
chapters,
and
skips
chapter
number and total number of
to the desired
chapter
number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
the
the
language,
and
setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound
changes
the
1/2,or
Numbers
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
1/2
setting.
Shows the current subtitles
changes
1/2,or
Numbers, SELECT/ENTER
mode,
and
setting.
1/2
1/2
1/2
VCD1.1
Items
Track Number
1/4
Time
Audio Channel
Sound
and
Selection Method
0:16:57
STER.
NORM.
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
1/2,or
Numeric, SELECT/ENTER
Shows the
elapsed playing time (Display only)
Shows the audio
changes
channel,
and
1/2
the audio channel.
Shows the current sound
changes the setting.
mode,
--
and
1/2
11
PREATION
Before
Initial
You
Operation (Continued)
set your
can
Picture
Settings
Personal Preferences
own
on
the
player.
TV
Aspect
nected.
Initial
1
DVD
4:3 Letterbox: Select when
General
Settings
Operation
setup
a
standard 4:3 TV is
theatrical
images
picture.
above and below the
4:3 Panscan: Select when
Press SETUP.
The
Displays
a
with
standard 4:3 TV is
nected.
menu
appears.
Both
Disc Audio
Original
Disc Subtitle
English
Displays pictures cropped to
sides of the picture are cut off.
16:9 Wide: Select when
masking
fill your TV
French
Disc Audio
4:3 Letterbox
Rating
German
Disc Subtitle
4:3 Panscan
Spanish
Disc Menu
16:9 Wide
Italian
Rating
TV
Code
Aspect
Menu
Language
Scan
Progressive
Audio
Digital
5.1
Output
Speaker Setup
Others
Chinese
Country
Polish
TV
Hungarian
Menu
Russian
Progressive
Other------------
Digital
conscreen.
16:9 wide TV is connected.
a
Disc Menu
Country
con-
bars
Code
Aspect
5.1
Language
Scan
Audio
Output
Speaker Setup
Others
Press 3/4 to select the desired item.
2 The
screen
will show the current
selected item,
3
as
well
as
setting for the
setting(s).
alternate
While the desired item is
selected,
setting.
3/4 to select the desired
press 2, then
Press SELECT/ENTER to confirm your selection.
require additional steps.
4
Some items
Press
5 setup
SETUP, RETURN,
or
PLAY to exit the
menu.
Language
Disc
Language
Select
Progressive Scan
Progressive
provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
DVD
language
:
Disc Audio
Off
Disc Subtitle
On
Disc Menu
for the disc's Menu, Audio, and Subtitle.
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 25. If you enter the wrong language
a
Original
Rating
The
Country
TV
5.1
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
Code
Language
Scan
Progressive
Audio
Digital
Output
Speaker Setup
Menu
Select
see
you
for the
language
Select switch is set to AUTO, Progressive Scan
during DVD of NTSC system is playing back
Russian
setup
menu.
English
Code
Aspect
Menu
Language
Pi
S
AUTO. Also if
System
Chinese
TV
Select switch is set to NTSC
Polish
Hungarian
Disc Subtitle
Rating
only
works when the VIDEO OUTPUT
switch is set to COMPONENT/PROGRESSIVE SCAN and
Disc Audio
Country
Scan
Chinese
when you press SETUP.
Disc Menu
12
Note
Progressive
This is the
or
only
System
works
.
Language
a
Output
Speaker Setup
Italian
Other------------
Others
Scan
Audio
Others
Spanish
Aspect
Menu
5.1
Language
Progressive
Digital
Disc Audio
Code
Aspect
Menu
code, press CLEAR.
TV
DVD
Scan Video
Caution
menu
Once the
setting for progressive scan output is entered, an
image
only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error, you
must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
will
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The DRC and PBC
Set the
variety
output options.
player's Digital Audio Output according to the
type of audio system you
changed
use.
decoder
or
with
DTS decoder,
MPEG decoder.
PCM: select when connected to
stereo
amplifier.
The DVD
a
TV
Digital
player outputs
digital
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
TV
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
technology. However,
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
PBC
Output
Speaker Setup
Set
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
5.1
audio
DRC to On for this effect.
Sample Frequency
change
digital
96KHz
Others
To
thanks to
Scan
Audio
Digital
5.1
48 KHz
Language
Progressive
at
Sample Freq.
Aspect
Menu
Output
Dynamic Range Control (DRC)
and the
Code
Audio
Speaker Setup
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
Rating
Country
Scan
Others
possible,
Disc Audio
Language
Progressive
5.1
sounds in the
Code
Aspect
Menu
Dolby Digital
2-channel
PREATION
PBC On
Rating
Country
a
DRC On
Disc Menu
Dolby Digital decoder).
equipment
changed.
Disc Subtitle
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
other
be
Disc Audio
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equipa
can
between On and Off.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
ment with
settings
Press 3/4 to select the desired item and press
SELECT/ENTER. The setting of the selected item is
of audio
a
the
Speaker settings
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
DVD
Select speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 24.)
Disc Audio
Disc Subtitle
R
R
Disc Menu
Front L
Rating
Country
TV
Code
Menu
Language
Progressive
Digital
5.1
Volume
Size
Aspect
Scan
Audio
Output
Delay
0dB
Small
ms
Test
Return
Speaker Setup
Others
13
Before
Operation (Continued)
Parental Control
Rating
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
Code
Country
scenes on
the disc. These
scenes are
are
Rating
Country
TV
8
7
Disc Menu
6
Rating
5
Country
TV
Code
Menu
Digital
Progressive
5.1
1
Output
Unlock
Speaker Setup
1
2
3
3
"Rating"
and
While
on
the
3
Change
Setup
menu
using
the
buttons.
4
"Rating"
is
a
selected, press
a
tons to
2.
Follow
the 3/4 buttons
3 of
step
selected, press
"Rating"
Select the first character
cursor
on
4-digit password using the numbered butconfirm the personal 4-digit security pass-
using
the 3/4 buttons.
1/2 buttons and select
using
Note
Confirmation of the
the code is
below
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
Changing
the
4-digit
code
1
Follow
2
Enter the old code, then press SELECT/ENTER.
Select Change using the 3/4 buttons then press
3
Steps
1-2
as
shown above to the left
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
4
Unlock: If you select
5
Enter exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
Unlock, Parental Control is
Ratings
play
1 to 8: Some discs contain
scenes
not
be
played. Higher
unless
an
rated
alternative
scenes
scene
is available
The alternative must have the
lower
one.
back will
or
If
no
the
same
on
rating
played
level in
5 selection, then press SETUP to exit the
If you
then press
forget your 4-digit
forget
your
password,
code
to clear the current pass-
1
Press SETUP to
2
Use the Number buttons to enter the
display
time and veri-
menu.
If you
the
setup
menu.
6-digit
number
"210499".
The
is cleared. "P CLr" appears on the disThe message will appear if the disc tray is closed. It
will be on the display until you try another feature.
rating
4-digit password
play.
menu.
3
14
4-digit code,
word, follow the procedure below.
found, play4-digit password
order to play the disc.
Press SELECT/ENTER to confirm your
new
the disc.
must enter the
rating
Enter the
SELECT/ENTER.
or a
suitable alternative is
stop. You
change
will not be
(Rating).
SELECT/ENTER.
in full.
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
country
menu.
a
not active. The disc will
2.
6 code selection, then press SETUP to exit the
personal 4-digit security password,
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
Select
on
left.
Press SELECT/ENTER to confirm your
word, then press SELECT/ENTER.
4
Code is
Country
Shift the
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
Enter
4
While
using
menu.
5 the second character using 3/4 buttons.
When you have not entered a password yet.
Enter a 4-digit password using the numbered buttons to create
Output
Speaker Setup
Code
Country
the setup
2
Others
Select
Select
1
2
Scan
Audio
Digital
Scan
Audio
Others
3
Language
Language
Progressive
4
Aspect
Code
Aspect
Menu
5.1
Disc Subtitle
US
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
Code Set
Disc Subtitle
The Parental Control feature allows
country-dependent.
whose standards
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
country/area
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 26.).
Enter
a new
code
as
shown above to the left
(Rating).
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
nected to the DVD
Audio
VCD2.0
Note
VCD1.1
input
source con-
player.
system: Turn
and select the
DVD
DVD
the TV and select the video
General Features
input
on
the audio
source
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available
system
on
the
Setup
menu.
connected to the
Moving
player.
to another TITLE
DVD
1/3
1
Press OPEN/CLOSE to open the disc
tray.
When
Load your chosen disc in the
2 facing up.
When
tray, with the label
a
Press OPEN/CLOSE to close the
READING appears
starts
disc has
another title
automatically.
tray.
the TV screen, and playback
If playback does not start,
menu
might
appear
Moving
DVD
When
instead.
The
or
displayed
may be displayed first after
Video CD which contains a menu.
loading
a
DVD
Use the 1 2
you want to
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER
to start
playback.
Press TITLE
or
MENU to return to the
a
title
menu screen.
setting
the
as
one
chapter
can move
or a
to another
operating procedures
for
(0-9).
press the buttons in
two-digit numbers,
rapid
succession.
Slow Motion
You also may set PBC to Off under
13.
1 Press SLOW t
menu
setup.
See page
The
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
than
follows:
player
DVD
"Parental Control",
DVDs may have a
VCD1.1
during playback.
T to select the
or
required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward),
1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion
or
T
mode, press PLAY.
(see
page 14).
region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 3 (three).
on
T
or
VCD2.0
will enter SLOW mode.
2 Use the SLOW t
--
more
track, you
one
Note
For
menu screen.
Notes
--
1/3
disc has
than
may differ depending on the disc.
Follow the instructions on the each menu screen.
using
stopped, then
(0-9) to
press DISPLAY. Then, press 3/4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
Use the number buttons to select the track you want
to view.
and the exact
is
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
buttons
Menu
1/12
on a
more
VCD2.0
Press RETURN to return to the
playback
Press SKIP/SCAN .
menu screen
DVD
to
to another CHAPTER/TRACK
chapter/track
is
title, you
can move
follows:
as
VCD1.1
disc has
a menu screen
one
press the appropriate numbered button
select a title number.
sure
on
press PLAY.
In some cases, the disc
If
than
more
Press DISPLAY when
double-sided DVD is inserted, make
the side you want to play is facing up.
3
a
Note
Slow motion
playback
in
reverse
is not
applicable
for
Video CD.
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
2 You
can
now
Search
during playback.
VCD2.0
two seconds
The
the TV
screen.
press REPEAT
a
Repeat mode,
screen.
press REPEAT
Off icon appears
Repeat
the TV
on
on
the TV
a
third time.
screen.
Note
On
> for about
or
a
setup
during playback.
now go into SEARCH mode.
2 Press and hold SKIP/SCAN . or >
player
on
currently playing,
All icon appears
Repeat
3 To exit
VCD1.1
1 Press and hold SKIP/SCAN .
The
The
go into PAUSE mode.
picture frame-by-frame by pressing
repeatedly on the remote control.
DVD
the disc
press REPEAT.
currently playing,
Track icon appears
second time.
advance the
PAUSE/STEP
the track
Repeat
repeat
Track/All/Off
Repeat
-
repeat
The
2 To
VCD1.1
will
player
1 To
Frame-by-frame playback
1 Press PAUSE/STEP
The
Video CDs
(continued)
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 13.
will
repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
Repeat
A-B
VCD2.0
DVD
VCD1.1
to select the
3 To exit SEARCH
A*
To
AB
repeat
a
sequence in
A- appears
briefly
begins (a-b
VCD1.1
Karaoke DVD
title:
the TV
on
starting point.
screen.
at your chosen end point.
on the TV screen, and the repeat sequence
repeat appears on the player 's display).
again
A-B appears
Random
a
1 Press A-B at your chosen
2 Press A-B
mode, press PLAY.
OFF
briefly
3 To cancel the sequence, press A-B.
1 Press RANDOM
during playback or in stop mode.
automatically begins Random Playback and
"RAND." appears on the display window.
The unit
2 To return to normal
"RAND."
playback, press RANDOM
disappears on the display window.
until
Time Search
0:16:57
DVD
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
Tips
By pressing SKIP/SCAN . or > during Random
playback, the unit selects another title (track) and
resumes Random playback.
play
appears
on
The
during playback.
the
playing
on-screen
at
dis-
screen.
The Time Search box shows the
elapsed playing
time of the
current disc.
2 Within 10
seconds, press 3/4
Search icon in the
on-screen
to select the Time
display.
The "-:--:--" appears in the Time Search box.
Note
This function
only
works with DVD Karaoke discs and
3 Within 10
video CD without PBC.
the
seconds,
required
onds from left to
Repeat
CHAPT
VCD2.0
DVD
the number buttons to enter
right
hours, minutes, and
sec-
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
ALL
TRACK
TITLE
use
start time. Enter
OFF
4 Within 10
seconds, press SELECT/ENTER
to confirm
the start time.
DVD Video Discs
1 To
repeat
the
-
Repeat Chapter/Title/Off
currently playing chapter,
Playback
an
press
invalid
starts from the selected time
on
the disc. If you enter
time, playback will continue from the
current
point.
REPEAT.
The
2 To
Repeat Chapter
icon appears
on
the TV
screen.
repeat the title currently playing, press REPEAT
second time.
The
Repeat
3 To exit
The
Repeat
3D Surround
This unit
Title icon appears
Repeat mode,
a
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
can
DVD
produce
a
3D SUR
NORM.
3D Surround effect, which
playback from two
simulates multi-channel audio
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
a
home theater
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
again
16
to select "NORM".
or
during playback.
effect, press SOUND
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
VCD1.1
during playback
or
still
playback
discs: Menus
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
move
then press SELECT/ENTER.
the
through
picture.
3 Press CLEAR to
the
buttons to
normal
resume
playback
or
DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1/2/3/4 buttons to highlight your selection,
level
magnification
return to
paused image.
DVD
Title Menu
1 Press TITLE.
If the current title has
screen.
Note
The
zoom
The
zoom
function may not work for
function may not work on
some
DVDs.
2 The
3 To
DVD
VCD2.0
menu, the
list
menu can
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
multi-angle
scenes.
Marker Search
DVD
the contents of DVD Video
Checking
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
(continued)
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
to
be memorized.
can
mark, follow these steps.
a
The disc
2 To
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
1 to enter up to nine Marker
1
During
a
points
on a
Marked Scene
disc
playback,
The MARKER SEARCH
menu
will appear
on
a
the
screen.
Marker
to
1/1
recorded at different
different
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
will start from the Marked
Changing
num-
a
angle
camera
appears
on
the
a
display.
1
the Audio
Language
DVD
ENG
D
6CH
3 Press SELECT/ENTER.
Press AUDIO
scene.
ferent audio
remove
scenes
The number of the current
seconds, press 1/2 to select
ber that you want to recall.
4 To
DVD
again.
press SEARCH.
2 Within 10
Playback
Angle
can
disc.
To Recall
displayed.
the disc menu, press MENU
If the disc contains
briefly.
screen
is
menu
remove
the MARKER SEARCH menu, press
repeatedly during playback
language or audio track.
to hear
a
dif-
SEARCH.
Subtitles
To clear
a
DVD
1
ENG
Marked Scene
Press SUBTITLE
1
During
disc
playback,
The MARKER SEARCH
2
menu
will appear
on
the
different subtitle
screen.
repeatedly during playback
languages.
to
see
the
Press 1/2 to select the Marker number that you want
to
3
press SEARCH.
Note
erase.
If
Press CLEAR.
appears, the feature is not available
on
the disc.
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to
erase
additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
Operation
Playing
The DVD
Audio CD and MP3 discs
an
Player
CD-ROM, CD-R,
Before
with Audio CD and MP3 Discs
recordings
on
read the notes
recordings,
on
MP3
page 22.
CD
1 Press and hold SKIP/SCAN .
CD-RW discs.
or
MP3
playing
Recordings on
MP3 formatted
play
can
Search
two seconds
during playback.
The
now
player
will
or
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or
>
repeatedly
to select the
Insert
1
The
disc and close the
a
menu
CD
tray.
the TV
on
appears
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
screen.
3 Search
MP3
Program
speed
Program
TRACK 1
TRACK 1.MP3
TRACK 2
TRACK 2.MP3
TRACK 3
TRACK 3.MP3
TRACK 4
TRACK 4.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
and direction
indicated
are
on
the
menu screen.
4 To exit SEARCH
mode, press PLAY.
TRACK 7.MP3
TRACK 7
Clear All
TRACK 8
0:56:35
STER.
Audio CD
Clear All
TRACK 8.MP3
00:00
NORM.
1
MP3
menu
OFF
Random
CD
1 Press RANDOM
menu
during playback
or
when
playback
is
stopped.
Press 3/4 to select
2
Playback
During playback,
To
the current track's
stop playback
CD
Pause
at any other
and
elapsed playing
time, press
To
during playback.
playback,
again.
or
1
press
repeat
A-B
a
Press SKIP/SCAN .
or
>
Press SKIP/SCAN . twice
In
previous
MP3
Repeat
or
to return to the
briefly
step
track.
appears
the
on
menu screen.
at your chosen end point.
icon and "A B" appears on the menu screen,
again
begins
to
play repeatedly.
3 To exit the sequence and return to normal
A-B again.
Repeat
icon and "OFF" appear
3D Surround
Repeat Track/All/Off
repeat
The
the track
Repeat
CD
currently playing,
Track icon appears
repeat all tracks
MP3
on a
on
the
The
Repeat
menu screen.
disc, press REPEAT
3 To cancel
The
Repeat
All icon appears
Repeat mode,
on
the
on
the
play,
press
menu screen.
CD
on
the
can
a
produce
a sec-
third time.
menu screen.
a
3D Surround effect, which
playback from two
simulates multi-channel audio
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
a
home theater
2 To turn off the 3D Surround
again
or
system.
1 Press SOUND to select "3D SUR"
during playback.
effect, press SOUND
to select "NORM".
menu screen.
press REPEAT
Off icon appears
This unit
channel audio from
press REPEAT.
ond time.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STEREO, LEFT, or RIGHT).
ferent audio channel
18
-"
case
during playback.
2 To
Repeat
press A-B at your chosen start-
back to
of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
1 To
The
The
to
CD
icon and "A
and the sequence
briefly during
playback to go to the next track
beginning of the current track.
the
CD
to another Track
menu screen.
sequence.
2 Press A-B
Moving
Playback and
display window
press RANDOM repeat"RAND." disappears on the
or
During disc playback,
ing point.
The
PAUSE/STEP
the
on
playback,
edly until RANDOM
display window and
STOP.
Random
"RAND." appears
menu screen.
Repeat
press PLAY
or
2 To return to normal
MP3
1 Press PAUSE/STEP
2 To return to
automatically begins
RANDOM
time will appear on the display.
Playback will stop at the end of the disc.
3
The unit
track then press PLAY.
a
starts.
CD
dif-
Programmed Playback
Programmed Playback
CD
MP3
with Audio CD
VCD2.0
Note
Program allows you to store your favorite
particular disc in the player memory.
contain 32 tracks
tracks for
On
a
The
menu
(Audio CD)
or
displayed
on
the TV
2
screen.
during playback or in
the Program Edit mode.
2 mode to enter
on
OPERATION
Insert Video CD and close the tray.
1
is
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 13.
60 tracks
Press PROGRAM
Press PROGRAM while
The VCD
Program
the stop
menu
playback
is
stopped.
will appear.
VCD
Program
E
TRACK 1
E
The
a
setup
Insert the disc and close the tray.
1
with Video CD
Programmed Playback
and MP3 Discs
Program can
(MP3 disc).
VCD1.1
mark will appear to the right of the word
the right side of the menu screen.
TRACK 2
Program
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
Press PROGRAM to exit the
E
the
mark will
3 SELECT/ENTER to
Program
CD
Note
track, then press
place the selected track
Press RETURN
a
to
3
place
additional tracks
on
Program
E
MP3
TRACK 1.MP3
TRACK 8.MP3
TRACK 8
TRACK 2.MP3
TRACK 2.MP3
TRACK 3
TRACK 10
TRACK 3.MP3
TRACK 4.MP3
TRACK 4
TRACK 3
TRACK 4.MP3
TRACK 3.MP3
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
TRACK 7
To
E
To
5
The
NORM.
00:00
1
menu
MP3
a
OFF
menu
programmed
a
highlighted
on
Press 3/4 to select the track you want to start
6 playing.
to the next page.
Press MENU to move to the previous page.
move
E
Track from
the
on
the
on
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list
have
played
once.
menu screen.
a
third time.
menu screen.
Program
List
during playback or in
Program Edit mode.
the
stop
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Press PLAY to start.
7 Playback begins
menu screen.
press REPEAT
Off icon appears
mode to enter the
The
the
on
on
All icon appears
Repeat
Erasing
the program list.
Press TITLE to
with
left.
on
Tracks
Repeat mode,
1 Press PROGRAM
track you selected last is
"Programmed Playback
the program list, press
second time.
Repeat
To cancel
Press 2.
The
3-7 of
Track icon appears
Repeat
The
Audio CD
steps
repeat all tracks
Clear All
TRACK 8.MP3
menu.
repeat the track currently playing, press REPEAT.
The
TRACK 7.MP3
Clear All
STER.
Follow
Audio CD and MP3 Disc"
REPEAT
TRACK 5
Program
the
Program
TRACK 12
TRACK 2
0:56:35
PROGRAM to exit the
Repeat Programmed
TRACK 1
TRACK 8
or
on
list.
Repeat step 3
Program list.
4
Edit mode;
Program
disappear.
Press 3/4 to select
the
Clear All
TRACK 8
Note
the
Erasing
1 Follow
List"
steps
as
Program
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
To
resume
are
for the disc will be erased.
also cleared when the disc is removed.
normal
playback
from
programmed
playback
Press and hold PROGRAM for 3 seconds until "PROG."
indicator
disappears
in the
display
window.
19
Additional Information
Last Condition
DVD
This
CD
player
Controlling
Memory
VCD1.1
Your remote control is
memorizes the last condition for the last
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the
If you load a disc that has its settings memorized, the latest stop position is automatically recalled.
player.
player
as
well
capable
of
your DVD
operating
limited functions of LG TV.
operate for your LG TV.
Before using the remote control, press the DVD
TV button to select the device to be operated.
1
To switch the remote control mode
Notes
--
as
Follow the instructions below to
ferent
--
the TV
be
device),
sure
(to operate
to press the DVD
or
or
a
dif-
TV but-
ton first.
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
The
ate the
it.
VOL
POWER, CH(4/3),
2 TV AV buttons
on
(1/2),
remote control
MUTE and
are
used to oper-
LG TV.
Screen Saver
Setting
The
Remote Control Codes for LG TV
appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
This remote control
minutes, the DVD Player will automatically
Code 2 is for LG TV with PAL
screen saver
picture
Setting
DVD
VCD2.0
VCD1.1
With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That
means
Vertical
interpolation
or
De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
two remote control
Code 1 is for LG TV with NTSC
turn itself off.
When the unit is
Video Mode
supports
codes for LG TV: Code 1 and Code 2.
shipped
or
multi
system.
system.
from the
factory,
the remote
control is set to Code 1.
To set the remote control to Code 2, hold down both
the TV button and "2" number button on the remote
control.
(If the batteries in the remote control are
replaced while the remote control is set to Code 2,
the setting will revert Code 1.)
video mode.
To set the remote control back to Code 1, hold down
both the TV button and "1" number button on the
To
remote control.
change
the video mode, press and hold DISPLAY
during disc playback. The new video
about 3 seconds
mode number selected is
displayed on the TV screen.
quality has improved. If not,
procedure until picture quality is
Note
Check whether the video
repeat
the above
improved.
Video mode
change
MODE1
→
MODE2
MODE5
→
MODE1
→
sequence:
MODE3
→
MODE4
→
If you turn off the power, the video mode will be back
to initial state (MODE1).
HDCD
HDCD is
specially
Playback
a process that increases the fidelity of both
encoded HDCD discs and standard CD audio
discs. When
an
cial decoder is
Indicator
To
lights.
HDCD-encoded disc is
automatically
No
user
playing, the speactivated and the HDCD
intervention is
required.
the benefits of HDCD, your DVD Player must
be connected to your A/V receiver via the Analog Audio
enjoy
Outputs. However, if your A/V receiver or surround
processor is equipped with built-in HDCD decoding, you
may also use a Coaxial or Optical digital audio connection so that the HDCD processing is done there.
20
If the remote control does not
TV, try
one
of the other code
the remote control
with the LG TV.
originally supplied
Due to the variety
of codes used
COMPANY cannot
will
operate your particular
or use
by manufacturer, OUR
guarantee that the remote control
operate every model of the LG TV.
Additional
Using
1
Information(Continued)
the Karaoke Function
Load
a
Use 1/2 to
8 selected.
karaoke disc.
ECHO: You
loud
howling sound)
microphone.
Connect
a
before
microphone
3 to both sockets.
4
connecting
KEY: You
a
the echo volume
adjust
by
can
the
change
key by pressing
the 1/2
buttons.
the
If you select Harmony of EFFECT after changing
the key, KEY is set to initial mode automatically.
?
to MIC1 or MIC2 or
If audio mode of DVD is set to 6CH
?
AUDIO, you
Press PLAY to start
EFFECT: You
playback.
1/2 is
by pressing
not select KEY.
can
Special Effects. Each time
Special Effect changes as
can use
pressed,
the
shown below.
Adjust MIC VOL
5 song.
control and then
sing
a
Off
If you want to set KARAOKE
option
follow
steps
VOICE: If you wish to
karaoke singer, select
Press KARAOKE.
KARAOKE
Harmony → Chorus → Flange1 → Flange2
change KEY, EFFECT is set to initial mode
(Off) automatically.
menu
→
If you
?
6-8.
6
can
the 1/2 buttons.
pressing
Set the MIC VOL control to the minimum
2 level to prevent acoustic feedback (e.g.
value of the item
adjust
a
appears.
Voice Select
Use 3/4 to select
an
display changes
as
Left
desired item
7 KEY, VOICE, MELODY
The
sing
or
(ECHO,
EFFECT).
shown in the chart below.
a
duet with the recorded
voice you desire.
Output
speaker
Right speaker
CH1
Voice1
Voice1
CH2
Voice2
Voice2
CH3
Voice1
Voice2
Off
None voice
None voice
MELODY: If you wish to sing only to the backing
or orchestra unaccompanied by a vocal guide
band
melody,
9
set Guide
Melody
to OFF.
Press KARAOKE to exit the KARAOKE
menu.
Notes
The karaoke feature functions
only
with
karaoke-compatible
discs.
The Voice Select and Guide
available
If
on some
Melody
menus
may not be
karaoke discs.
microphone is connected to the DVD player, you can not
Digital Audio Output of setup menu.
If a microphone is connected to the DVD player, SOUND
button is not available during DVD playback and SOUND
and AUDIO button is not available during Audio CD/Video
CD playback.
a
set
The Karaoke function may not be available on some discs
(ex. MP3, DTS CD, when DVD audio mode is set to DTS,
etc.).
For
more
details, refer
to the information
supplied
with the
disc.
21
OPERATION
Additional
Notes
on
Information(Continued)
MP3 Discs
About MP3
An MP3 file is audio data
compressed by using
MPEG1, the audio layer-3 file-coding scheme. We call
files that have the
The
player
can
extension other than
The
player
can
file extension
MP3 Disc
file extension "MP3 files".
".mp3"
not read
an
MP3 file that has
file
a
".mp3".
not read
a
fake MP3 file that has
a
".mp3".
compatibility
with this
player
is limit-
ed
as
1.
4.
Sampling Frequency / only at 44.1kHz
Bit rate/ within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
5.
A
2.
follows:
-
3.
Creator", which
single
creates
session disc
track. If there is
no
an
ISO9660 file
requires
MP3 file in the 1st track, it
MP3 files. If you wish to
files, format all the data in the disc or
not
system.
MP3 files in the first
playback
can-
playback
MP3
use a new
one.
We do not recommend
6.
use
File
7.
and
using CD-RW discs.
only.
names should be named using 8 letters
must incorporate the ".mp3" extension
e.g. "********.MP3".
Do not use special characters such
8.
9.
Please
finished CD-R discs
"_?!><+*}{`[@ ]:;\/.,"
etc.
Total number of files
on
or
less
as
the disc should be less than
200.
10. Use 74 minute CD-R discs
minute CD-R
This DVD
(700M)
(650M),
do not
use
80
software.
player requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
set to these standards. There
of recordable disc formats
MP3
are
are
optimal
automatically
many different types
CD-R containing
(including
files).
Customers should also note that
required
permission
is
in order to download MP3 files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
sought
22
from the
copyright
owner.
Troubleshooting
Check the
following guide
for the
possible
cause
of
before
problem
a
service.
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
a
disc.
cord into the wall outlet
(Check
that the DVD or,
audio CD indicator in the
window is
not work.
No
contacting
The TV is not set to receive DVD
picture.
signal
output.
Select the
on
the TV
player
The video cable is not connected
display
lit.)
appropriate video input mode
the picture from the DVD
so
the TV
on
appears
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
equipment
connected with the
audio cable is not set to receive DVD
signal output.
The audio cables
are
not connected
on
the TV.
input mode of the
you can listen to the
sound from the DVD player.
audio receiver
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The
Digital Audio Output
position.
is set to the
playback picture
is
The disc is
on
the
equipment
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The
Turn
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert
a
disc.
(Check
that the DVD,
audio CD indicator in the DVD
or
display
is
lit.)
An
unplayable
disc is inserted.
Insert
a
playable
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed at
player.
the
of the DVD
The remote control is too far from the
DVD
player.
There is
an
the disc
tray correctly
Clean the disc.
the
The remote control
on
guide.
obstacle in the
path of the
player.
rating
Rating
function
or
change
level.
Point the remote control at the remote
sensor
of the DVD
Operate
(7 m).
player.
the remote control within 23 ft
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
23
REF NC
Speaker Settings
Make the
following settings
for the built-in 5.1 channel
surround decoder.
Press 1 / 2 to customize the sound to confirm to the
acoustics of your room by adding a delay effect to
the Center Speaker and Rear (Surround) Speakers.
Disc Audio
Disc Subtitle
R
R
Disc Menu
Rating
Volume
Code
Language
Progressive
Digital
5.1
0 dB
Size
Aspect
Menu
When 5.1 Channel Surround is
Front L
Country
TV
Delay
Scan
Audio
Small
ms
tons
on
While "5.1
each
speaker
is the
You can set the Delay
(Surround) Speakers to cus-
same.
tomize the sound to the acoustics of your
Speaker Setup" using
the setup
2 button.
played, you can
the best sound if the distance between you and
time in the Center/Rear
Return
Speaker Setup
Select "5.1
enjoy
Test
Output
Others
1
Delay
room.
the 3/4 but(A)
L
menu.
R
C
Speaker Setup"
is
selected, press
2
DC
DF
SW
Press 1/2 buttons to select the desired
speaker.
3
Adjust options by using 3/4/4/2 buttons.
4
Speaker
Select
DS
SL
SR
(B)
selection
speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer)
a
ers
Note
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
the
delay (Center Speaker)
equal to or longer than the DF
the below figure, set the mode as 0ms. Otherwise,
change the setting according to the table below.
(A)=DF-DC
Distance of (A)(cm)
Setting(ms)
Setting
If the distance of DC is
Volume
Press 1 / 2 to
adjust the output
speaker. (-10dB 0dB)
level of the selected
~
Size
a
mode.
(Large,
Small
or
None)
If you have connected the system to a speaker with
a low frequency of 100Hz or below, select "Large."
If you have connected the system to a speaker witha low frequency of 100Hz or below, select
out
Front L/R
speaker's
a
size
certain
be set to
"Large"
or
speaker's size is set to "Small," Rear and
Center speaker's size can be set to "Small" or
"None."
can
3
136
4
170
5
the
170
5
340
10
510
15
Test
can
If Front L/R
"None.
102
speaker connected,
"Small."
Subwoofer's size
2
If the distance of Df is
"Small." If you have not connected a subwoofer,
always select "Large" for Front speaker (L/R).
When you do not have
select "None."
1
68
delay (Rear (Surround) Speaker)
equal to the distance of DS in the
above, set the mode as 0ms. Otherwise, change the
setting according to the table below.
(B)=DF-DS
Distance of (B)(cm)
Setting(ms)
Setting
Press 1 / 2 to set
34
be set
only
to
"Large"
or
Press SELECT/ENTER to test the signals of each
speaker. Adjust the volume to match the volume of
signals memorized in the system.
Front Left (L) → Front Right (R) → Center
→ Rear Left (L) → Rear Right (R)
test
Return
Press SELECT/ENTER to return to the
24
in
previous
menu.
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
25
Code List
Country
Enter the
appropriate
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Territory
OM
Oman
UY
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
26
Republic
Islands
(French)
State
(British)
(USA)
Specifications
General
Power
Power
requirements
AC 110-240V
consumption
14W
Dimensions
Mass
(approx.)
,
50/60 Hz
430X76.5X242mm(wxhxd)
2.8
(approx.)
kg
Operating temperature
5˚C to 40˚C
Operating humidity
5%to90%
(41˚F
to
104˚F)
REF NC
System
Laser
Semiconductor laser,
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
S-VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative
(C)0.3V(p-p)75Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Vp-p
75
ohms, sync negative
sync, Mini DIN
4-pin
x
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
5 V
Audio
output (analog audio)
1.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
75 Ω,
Optical
connector
x
1
1
Audio
(p-p),
x
1
Accessory
S-Videocable.....................1
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
Manufactured under license from
Confidential
unpublished
DTS and DTS
Digital
works.
Surround
Dolby Laboratories. Dolby and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
are
trademarks of
Digital
Theater
Systems,
of
Dolby
Laboratories.
Inc.
HDCD , High Definition Compatible Digital and Pacific MicrosonicsTM are either registered trademarks or trademarks
Microsonics, Inc. in the United States and/or other countries. HDCD system manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the following patents: United States: 5,479,168, 5,638,074,
5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,872,531 and 5,864,311. Australia: 669114. Other patents pending.
,
of Pacific
27
P/NO
:
3834RS0034S
Download PDF