ENGLISH OWNER’S MANUAL LED LCD TV Please read this manual carefully before operating the your TV and retain it for future reference. LED LCD TV MODEL M2452D www.lg.com 2 TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 3 LICENSES 29 REMOTE CONTROL 4 INSTALLATION PROCEDURE 31 CUSTOMIZING SETTINGS 31 Accessing main menus 5 ASSEMBLING AND PREPARING 5 7 8 9 9 11 12 13 14 Unpacking Parts and buttons Lifting and moving the TV Setting up the TV -Attaching the Stand -Mounting on a table -Tidying cables -Detaching the Stand -Mounting on a wall 16 WATCHING TV 16 Turning the TV on for the first time 18 MAKING CONNECTIONS 35 TROUBLESHOOTING 18 19 Connecting an antenna Connecting to a HD receiver, DVD, VCR player or Gaming device -HDMI connection -HDMI to DVI connection -Component connection -Composite connection Connecting to an audio system -Headphone connection Connecting to a USB Connecting to a PC -HDMI connection -HDMI to DVI connection -RGB connection 35 19 20 21 22 23 23 24 25 26 27 28 32 USING THE USER GUIDE 32 32 32 Accessing User Guide menu. -Using the TV menu -Using the Remote Control 33 MAINTENANCE 33 33 33 33 34 Cleaning Your TV Screen and frame Cabinet and stand Power cord Preventing “Image burn” or “Burn-in” on your TV screen General 36 SPECIFICATIONS 39 ANTENNA ISOLATOR INSTALLATION GUIDE 39 39 Unpacking and Exterior of antenna isolator Connection method LICENSES 3 LICENSES Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 ENGLISH Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. 4 INSTALLATION PROCEDURE INSTALLATION PROCEDURE ENGLISH 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV. 3 Connect an external device to the TV. NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are yy using. New features may be added to this TV in the future. yy ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING ENGLISH Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to yy upgrade of product functions. CAUTION Do not use any pirated items to ensure the safety and product life span. yy Any damages or injuries by using pirated items are not covered by the warranty. yy NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to yy upgrade of product functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick yy and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. B B A A *A *B 10 mm 18 mm 6 ASSEMBLING AND PREPARING M2452D ENGLISH Remote control. Batteries (AAA). CD (Owner's Manual). Cards. (See p.29, See p.30) RGB Cable. (See p.28) Power Cord. AC-DC Adapter. Cable Tie. (See p.11) (See p.11) (See p.12) or Stand Base. (See p.9, See p.13) Stand Body. (See p.9, See p.13) Isolator (See p.39) ASSEMBLING AND PREPARING 7 Parts and buttons ENGLISH Remote Control Sensor Standby Light yyLighting On: Turned off yyLighting Off: Turned on Touch Buttons Connection panel (See p.18) Touch button Description Scrolls through the saved programmes. Adjusts the volume level. OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source. /I Turns the power on or off. NOTE All of the buttons are touch sensitive and can be operated through simple touch with your finger. 8 ASSEMBLING AND PREPARING Lifting and moving the TV ENGLISH When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. When holding the TV, the screen should face yy away from you to prevent the screen from scratches. CAUTION Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images. It is recommended to move the TV in the yy box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect yy the power cord and all cables. Hold the top and bottom of the TV frame yy firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. When transporting the TV, do not expose the yy TV to jolts or excessive vibration. When transporting the TV, keep the TV yy upright, never turn the TV on its side, or tilt towards the left or right. ASSEMBLING AND PREPARING Setting up the TV 3 Attach the Stand Base from the Stand Body by Attaching the Stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. 1 Place the TV with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. When attaching the stand to the TV, yy place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 2 Attach the Stand Body from the TV. Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten. ENGLISH turning the screw to the right with a Coin. M2452D CAUTION 9 10 ASSEMBLING AND PREPARING CAUTION ENGLISH Do not carry the monitor upside-down as this yy may cause it to fall off its stand, resulting in damage or injury. The illustration shows a general example of yy installation and may look different from the actual product. Do not carry the monitor upside-down by yy holding the stand body as this may cause it to fall off, resulting in damage or injury. The illustration shows a general example of yy installation and may look different from the actual product. ASSEMBLING AND PREPARING Mounting on a table 11 WARNING table. Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers. 10 cm 10 cm 10 cm 10 cm CAUTION Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. CAUTION Do not place the TV near or on sources of heat, as this may result in fire or other damage. ENGLISH 1 Lift and tilt the TV into its upright position on a 12 ASSEMBLING AND PREPARING Using the Kensington security system NOTE ENGLISH Tilt from +20 to -5 degrees up or down to adjust the angle of the TV to suit your view. -5 +20 The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the TV and a table. Front Rear Tidying cables Gather and bind the cables with the supplied cable tie. NOTE The Kensington security system is optional. You can obtain additional accessories from most electronics stores. ASSEMBLING AND PREPARING Detaching the Stand 1 Place the TV with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. When detaching the stand to the TV, yy place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 2 Turn the screw to the left, and then pull out the Stand Base from the Stand Body. 3 Pull out the Stand Body from the TV. ENGLISH M2452D 13 14 ASSEMBLING AND PREPARING Mounting on a wall 5 Please use VESA standard as below. ENGLISH For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 10 cm 10 cm 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.0 inch) and above yy * Please use VESA standard wall mount pad and screws. 100 x 100 M4 4 RW120 10 cm 10 cm VESA (A x B) yy A If you intend to mount the TV to a wall, attach Wall mounting interface (optional parts) to the back of the TV. When you install the TV using the wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the TV might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications. B ASSEMBLING AND PREPARING 15 CAUTION NOTE Use the screws that are listed on the VESA yy standard screw specifications. The wall mount kit includes an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Be sure to use the proper length. For more information, refer to the instructions yy supplied with the wall mount. ENGLISH Disconnect the power cord first, and then yy move or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted yy wall, it may fall and result in severe injury. Use an authorized LG wall mount and yy contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the TV and void your warranty. Use the screws and wall mounts that meet yy the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. 16 WATCHING TV WATCHING TV ENGLISH Turning the TV on for the first time When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 Press on the TV or power button on the remote control to turn the TV on. The Standby Light is turned off. NOTE When the TV is in Power saving mode, the Standby Light turns amber. 3 The initial setting screen appears if you access the TV for the first time. NOTE If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting menus will disappear. 4 Follow the on-screen instructions to customize your TV according to your preferences. Language Selects a language for the display. Mode Setting Selects Home Use for the home environment. Power Indicator Country Selects the Standby Light. If you select On, the TV turns on the Standby Light in the front panel when the TV is off. Selects a country to display. Time Zone Selects the time zone and daylight saving. (When Australia is selected for Country) Auto Tuning Scans and saves available programmes automatically. WATCHING TV 17 NOTE 5 When the basic settings are complete, press OK. NOTE If you do not complete the initial setting, it will appear whenever you access the TV. 6 To turn the TV off, press on the TV. The Standby Light is turned on. CAUTION Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. NOTE You can also access Factory Reset by accessing OPTION in the main menus. ENGLISH For those countries without confirmed DTV broadcasting standards, some DTV features might not yy work, depending on the DTV broadcasting environment. To display images in the best quality for your home environment, select Home Use mode. yy Store Demo mode is suitable for the retail environment. yy If you select Store Demo mode, the previously customized settings will switch to the default yy settings of Store Demo mode in 2 minutes. 18 MAKING CONNECTIONS MAKING CONNECTIONS ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, camcorders or cameras, gaming devices, and other external devices. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input yy cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual supplied with the connected device. The external device connection may differ from the model. yy Connect external devices to the TV regardless of the order of the TV port. yy Connecting an antenna Connect an antenna, cable or cable box to watch TV referring to the following. The illustrations may differ from the actual accessories and an RF cable is optional. Connect the TV to a wall antenna socket with an RF cable (75 ). (Not Provided) Outdoor Antenna VHF Antenna yy UHF Antenna yy Wall Antenna Socket NOTE Use a signal splitter to use more than 2 TVs. yy If the image quality is poor, install a signal yy amplifier properly to improve the image quality. If the image quality is poor with an antenna yy connected, aim the antenna to the proper direction. Visit http://AntennaWeb.org for more yy information about the antenna and cable connection. CAUTION Make sure not to bend the copper wire of yy the RF cable. Copper wire Complete all connections instructions yy between devices, and then connect the power cord to the power outlet to prevent damages to your TV. MAKING CONNECTIONS 19 Connecting to a HD receiver, DVD, VCR player or Gaming device HDMI connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration. NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy Supported DTV Audio: MPEG, Dolby Digital. yy Supported HDMI Audio format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/19 yy 2k, DTS Not supported.) Choose any HDMI input port to connect. yy It does not matter which port you use. yy (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device ENGLISH Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode. 20 MAKING CONNECTIONS HDMI to DVI connection ENGLISH Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the HDMI to DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. NOTE If you do not use an optional external speaker, connect the external device to the TV with the optional audio cable. (Not Provided) (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device MAKING CONNECTIONS 21 Component connection NOTE If cables are installed incorrectly, it could case the image to display in black and white or with distorted yy color. Check to ensure the cable are matched with the corresponding color connection. yy (Not Provided) (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device ENGLISH Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. 22 MAKING CONNECTIONS Composite connection ENGLISH Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown on the following illustration. NOTE Check to ensure the cable are matched with the corresponding color connection. (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device MAKING CONNECTIONS 23 Connecting to an audio system ENGLISH Use an optional external audio system instead of the built-in speaker. Headphone connection Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as shown on the following illustration. NOTE AUDIO menu items are disabled when connecting a headphone. yy Headphone impedance: 16 yy Max audio output of headphone: 10 mW to 15 mW yy Headphone jack size: 0.35 cm yy (Not Provided) Headphone 24 MAKING CONNECTIONS Connecting to a USB ENGLISH Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV and access the USB menu to use various multimedia files. or USB (Not Provided) MAKING CONNECTIONS 25 Connecting to a PC * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. NOTE It is recommended to use the TV with the HDMI connection for the best image quality. yy If you do not use an optional external speaker, connect the PC to the TV with the optional audio yy cable. If you turn the TV on when the set becomes cold, the screen may flicker. This is normal. yy Some red, green, or blue spots may appear on the screen. This is normal. yy Connect the signal input cable and tighten it by turning the screws clockwise. yy Do not press the screen with your finger for a long time as this may result in temporary yy distortion on the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image yy burn. Use a screensaver if possible. NOTE If you want to use HDMI-PC mode, you must set the input label to PC mode. yy The OSD (On Screen Display) is displayed on the screen as shown below. yy »»When turning the product on in HDMI input. »»When switching to HDMI input. Is the input connected to your PC? Yes No Do not show message again. If you select "Yes" the size and image quality are optimised for your PC. yy If you select "No" the size and image quality are optimised for the AV device (DVD player, set-top yy box, gaming device). If you select "Do not show message again" this message does not appear until the TV is reset. You yy can change the set value in SETTINGS s INPUT s Input Label. The values set for HDMI1/HDMI2 are saved independently. yy ENGLISH Your TV supports the Plug & Play* feature and has the built-in speakers with Infinite Surround that reproduces sound clearly with a rich bass. 26 MAKING CONNECTIONS HDMI connection ENGLISH Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the TV with an HDMI connection. NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy If you want to use HDMI-PC mode, you must set the input label to PC mode. yy Supported DTV Audio: MPEG, Dolby Digital. yy Supported HDMI Audio format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/19 yy 2k, DTS Not supported.) Choose any HDMI input port to connect. yy It does not matter which port you use. yy (Not Provided) PC MAKING CONNECTIONS 27 HDMI to DVI connection NOTE If you want to use HDMI-PC mode, you must set the input label to DVI mode. yy If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. yy (Not Provided) (Not Provided) PC ENGLISH Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. 28 MAKING CONNECTIONS RGB connection ENGLISH Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. NOTE If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. (Not Provided) PC REMOTE CONTROL 29 REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the remote control sensor on the TV. (POWER) Turns the TV on or off. (User Guide) (See p.32) Accesses the User Guide menu. GUIDE Shows programme guide. INFO ⓘ Views the information of the currently program and the screen. LIST Displays the programme table. SETTINGS Accesses the main menus or saves your input and exit menus. OK Selects menus or options and confirms your input. (BACK) Allows the user to move return one step in an interactive application, EPG or other user interaction function. TV/RAD Selects Radio, TV and DTV programme. RATIO Resizes an image. INPUT Selects the input mode. Number buttons Enters numbers. Q.VIEW Returns to the previously viewed programme. Q.MENU Accesses the quick menus. Navigation buttons Scrolls through menus or options. EXIT Clears all on-screen displays and returns to TV viewing from any menu. ENGLISH M2452D 30 CUSTOMIZING SETTINGS M2452D ENGLISH FAV Displays the selected favourite programme. AD Switches the Audio Description On or Off. PIP Turns the PIP mode on or off. (VOLUME) Adjusts the volume level. Coloured buttons These buttons are used for teletext (on TELETEXT models only), Programme edit. USB Menu control buttons USB menu(Photo List and Music List or Movie List). Programme Selects a programme. PAGE Moves to the previous or next screen. MUTE Mutes all sounds. Backlight Adjusts the brightness of the screen by controlling the screen backlight. SUBTITLE Recalls your preferred subtitle in digital mode. Teletext buttons These buttons are used for teletext. For further details, see the ‘Teletext’ section. NOTE On MHEG channel, you cannot adjust the backlight with the yellow or blue key. (South Africa only) AD(Audio Description) may not available depend on product model that you are using. CUSTOMIZING SETTINGS 31 CUSTOMIZING SETTINGS ENGLISH Accessing main menus 1 Press SETTINGS to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. (BACK). When you return to the previous menu, press PICTURE Adjusts the image size, quality or effect. AUDIO Adjusts the sound quality, effect or volume level. SETUP Sets up and edit programmes. TIME Sets the time, date or Timer feature. LOCK Locks or unlocks channels and programs. OPTION INPUT MY MEDIA Customizes the general settings. Views the input sources with their labels. Using integrated media feature. Press RED button to access the Customer Support menus. yy Press GREEN Button to access the FAQ menus. yy Press OK( ) to set programme settings. Customer Support Customer Support Using Customer Support feature. Software Update yy Picture Test yy Sound Test yy Signal Test yy Product/Service Info. yy User Guide yy FAQ Exit FAQ Shows answers to frequently asked questions about TV viewing and sets the related menus. 32 USING THE USER GUIDE ENGLISH USING THE USER GUIDE Accessing User Guide menu. Using the TV menu y Image shown may differ from your TV. User Guide 3 2 To use input device 1 Press SETTINGS to access the main menus. 2 Press the RED button to access the Customer Support menus. 3 Press the Navigation button to scroll to User To use Energy Saving feature PROGRAMME Setting option you want and press OK. 5 When you are finished, press EXIT. When you return to the previous menu, press (BACK). Using the Remote Control To set time options OPTION To set TV lock options Advanced Function To set language Information Guide and press OK. 4 Press the Navigation buttons to scroll to the To use SUPER Energy Saving feature PICTURE, SOUND Setting To set country 1 1 Allows to select the category you want. 2 Allows to select the item you want. You can use ꕌ/ꕍto move between pages. 3 Allows to browse the description of the function you want from the index. User Guide 1 OPTION > To set language SETTING OPTION Language You can select the language of the menu displayed on the screen and the digital sound broadcasting. y Menu Language : Selects a language for the display text. y Audio Language [In Digital Mode Only] : Select the desired language when watching digital broadcasting containg several voice languages. y Subtitle Language [In Digital Mode Only] : Use the Subtitle function when two or more subtitle languages are broadcast. ✎ If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed. PROGRAMME Setting PICTURE, SOUND Setting OPTION Advanced Function Information 1 Press (User Guide) to access the User Guide. 2 Zoom In Close SETTING OPTION Language You can select the language of the menu displayed on the screen and the digital sound broadcasting. y Menu Language : Selects a language for the display text. y Audio Language [In Digital Mode Only] : elect the desired language when watching digital broadcasting containg several voice languages. y Subtitle Language [In Digital Mode Only] : Use the Subtitle function when two or more subtitle languages are broadcast. ✎ If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed. 2 Press the Navigation buttons to scroll to the option you want and press OK. 3 When you are finished, press EXIT. When you return to the previous menu, press (BACK). 2 Zoom Out Close 1 Shows the description of the selected menu. You can use ꕌ/ꕍto move between pages. 2 Zooms in or out the screen. MAINTENANCE 33 MAINTENANCE Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a clean and dry cloth. CAUTION Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in yy scratches on the screen and image distortions. Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, yy lubricants, as these may damage the screen’s finish and cause discolorations. Cabinet and stand To remove dust, wipe the cabinet with a dry and soft cloth. To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. CAUTION Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or yy malfunction. Do not use any chemicals as this may deteriorate the surface. yy Power cord Remove the accumulated dust or dirt on the power cord regularly. ENGLISH Cleaning Your TV 34 MAINTENANCE Preventing “Image burn” or “Burn-in” on your TV screen ENGLISH If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become yy a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the yy letterboxed area of the screen. Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD) yy to prevent image burn. TROUBLESHOOTING 35 TROUBLESHOOTING ENGLISH General Problem Resolution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet. yy Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. yy Check the power control settings. The power supply may be interrupted. yy Check if the Auto sleep feature is activated in the Time settings. yy If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. 36 SPECIFICATIONS SPECIFICATIONS ENGLISH M2452D Panel Video Signal Screen Type 609.6 mm Wide (24 inch) Visible diagonal size : 609.6 mm Pixel Pitch 0.28 mm (H) x 0.28 mm (V) Max. Resolution 1920 × 1080 @ 60 Hz Recommended Resolution 1920 × 1080 @ 60 Hz Horizontal Frequency 30 kHz to 83 kHz Vertical Frequency 56 Hz to 75 Hz Synchronization Type Separate Sync, Digital Input Connector Power TV, D-Sub Analog, PC Audio In, Component, CVBS, HDMI*2, USB Rated Voltage 19 V Power Consumption On Mode : 33 W (typ.) Off Mode 0.4 W AC/DC Adapter Tilt 2.0 A Manufacturer: LITE-ON, Model PA-1650-64 Manufacturer: LG Innotek, Model PSAB-L101A Tilt Range Dimensions (Width x Depth x Height) Weight -5 to 20° With Stand 566.9 mm x 182.8 mm x 417.4 mm 3.4 kg Without Stand 566.9 mm x 62.9 mm x 345.9 mm 2.9 kg Environmental conditions Operating Temperature Operating Humidity 10 °C to 35 °C 20 % to 80 % Storage Temperature Storage Humidity -10 °C to 60 °C 5 % to 90 % Product specifications shown above may be changed without prior notice due to upgrade of product functions. 37 SPECIFICATIONS RGB (PC) / HDMI (PC) supported mode Component supported mode Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.080 720 x 480 15.730 59.940 640 x 480 31.469 59.940 720 x 480 15.750 60.000 640 x 480 37.500 75.000 720 x 576 15.625 50.000 800 x 600 37.879 60.317 720 x 480 31.470 59.940 800 x 600 46.875 75.000 720 x 480 31.500 60.000 1024 x 768 48.363 60.004 720 x 576 31.250 50.000 1024 x 768 60.023 75.029 1280 x 720 44.960 59.940 1152 x 864 67.500 75.000 1280 x 720 45.000 60.000 1280 x 720 45.000 60.000 1280 x 720 37.500 50.000 33.720 59.940 1280 x 800 49.702 59.810 1920 x 1080 1280 x 1024 63.981 60.020 1920 x 1080 33.750 60.000 1280 x 1024 79.976 75.025 1920 x 1080 28.125 50.000 1400 x 1050 65.317 59.978 1920 x 1080 56.250 50.000 67.432 59.940 67.500 60.000 1440 x 900 55.935 59.887 1920 x 1080 1600 x 900 60.000 60.000 1920 x 1080 1680 x 1050 64.674 59.883 1680 x 1050 65.290 59.954 1920 x 1080 67.500 60.000 HDMI (DTV) supported mode Component port connecting information Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 480 31.469 31.500 59.940 60.000 720 x 576 31.250 50.000 1280 x 720 37.500 50.000 1280 x 720 44.960 45.000 59.940 60.000 1920 x 1080 33.720 33.750 59.940 60.000 1920 x 1080 28.125 50.000 1920 x 1080 27.000 24.000 1920 x 1080 33.750 30.000 1920 x 1080 56.250 50.000 1920 x 1080 67.430 67.500 59.940 60.000 Resolution Component ports on the TV Video output ports on DVD player Y PB PR Y PB PR Y B-Y R-Y Y Cb Cr Y Pb Pr ENGLISH Resolution 38 SPECIFICATIONS NOTE ENGLISH Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may yy become permanently imprinted on the screen. Use a screen saver when possible. There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. yy Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. The synchronization input waveform for Horizontal and Vertical frequencies are separate. yy Connect the signal cable from the RGB output port of the PC to the RGB (PC) port of the TV or the yy signal cable from the HDMI output port of the PC to the HDMI/DVI IN port on the TV. Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included yy with the TV). If using a sound card, adjust PC sound as required. yy If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only yy one of either RGB or HDMI/DVI IN to display the PC output on the TV. If the graphic card on the PC does output analogue and digital RGB simultaneously, set the TV to yy either RGB or HDMI. (The other mode is set to Plug and Play automatically by the TV.) DOS mode may not work depending on the video card if you use an HDMI to DVI cable. yy If you use too long an RGB-PC cable that is too long, there may be interference on the screen. We yy recommend using under 5 m of cable. This provides the best picture quality. ANTENNA ISOLATOR INSTALLATION GUIDE Use this to install TV in a place where there is a voltage difference between GND of power and GND of antenna signal. If there is a voltage difference between GND of power and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. Avoid disconnecting the antenna Isolator after installation. Unpacking and Exterior of antenna isolator Plug 1 Plug 2 Plug 1 Isolator (Type A) Plug 2 Isolator (Type B) Connection method ENGLISH 1 Connect Plug 1 with a signal cable. 2 Connect Plug 2 with ANT input end on the back of TV. Image shown may differ from your TV. yy or Cable / Antenna Isolator TV or Cable / Antenna Isolator Set Top Box TV “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” When applying the RF Isolator, a slight loss of signal sensitivity can occur. ENGLISH ANTENNA ISOLATOR INSTALLATION GUIDE 39 Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to email@example.com. This offer is valid for three (3) years from the date on which you purchased the product.