LG W2086T User's Guide

User’s Guide
W2086T
Make sure to read the Important Precautions before using the
product. Keep the User's Guide(CD) in an accessible place for future
reference.
See the label attached on the product and give the information to
your dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
2
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or
other liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal (Only, Hg lamp used LCD Monitor)
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
3
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
User's Guide/Cards
Power Cord
(Depending on the country)
DVI-D Signal Cable
(This feature is not available
in all countries.)
OPEN
15-pin D-Sub Signal Cable
(To set it up, this signal cable may
be attached to this product before
shipping out.)
Cable Holder
(This feature is not available
in all models.)
IMPORTANT
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite
cores to maintain standard compliance for the product.
4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Connecting and Disassembling the stand
1. Place the monitor face down on the soft cloth.
2. Assemble the Stand Base into the Stand Body in the correct direction.
Make sure you push the Stand Base until the end.
Stand Body
Stand Base
The Stand Base
may fall and get
damaged or cause
injury.
Good Connection
Bad Connection
5
Connecting the Display
3. Turn the screw to the right to fix the Stand Body to the Stand Base.
Screw
Turn the screw
by using the
screw handle.
4. Then fold the screw handle flat.
5. Once assembled take the monitor up
carefully and face the front side.
6. To disconnect the Stand Base from the Stand Body, unfold the screw handle and
turn it to the left.
IMPORTANT
This picture depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and
get damaged or cause injury.
6
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Positioning your display
After installation, adjust the angle as shown below.
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -2˚~15˚
15
-2
Do not touch or press the screen when
adjusting the angle of the monitor.
When adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body. You can
hurt your finger(s).
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
7
Connecting the Display
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
and power cord
of the signal cable.
2. Connect signal input cable 1
2
in order, then tighten the screw
A Connect DVI-D(Digital signal) Cable
B Connect D-sub(Analog signal) Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
AC-IN
D-SUB
DVI-D
Varies according to model.
Wall-outlet type
B
A
DVI-D (This feature is not available in all countries.)
PC
PC
When using a D-Sub signal input cable connector for Macintosh
Mac adapter : For Apple Macintosh use, a separate plug adapter
is needed to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
8
Connecting the Display
3. Gather the cables together and use the Cable Holder to arrange them as shown in
Cable Holder
OPEN
the picture.
4. Press the Power Button (
) on the front panel to turn the power on. When monitor
power is turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press
the AUTO/SET function button to improve resolution.
9
Control Panel Functions
Front Panel Controls
1
2
3
4
5
6
7
8
Button
Use this button to enter CINEMA MODE, AUTO
BRIGHT, TIME CONTROL, LIVE SENSOR or SMART
menus.
For more information, refer to page 15.
Button
Use this button to enter EZ ZOOMING, 4:3 IN WIDE or
PHOTO EFFECT menus.
For more information, refer to page 16.
MENU Button
Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
10
Control Panel Functions
Buttons
Use these buttons to select or adjust functions in the On
Screen Display.
Use this function to select optimal image conditions in
accordance with the surrounding environment
(Brightness, Image type).
For more information, refer to page 17.
(SOURCE Hot key)
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
AUTO/SET
Button
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
1600 x 900
Power Button
Use this button to turn the display on or off.
Power Indicator
The power indicator stays red if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking red.
Light Sensor
This is the sensor to measure the external brightness.
Makes the screen brighter or darker, depending on the
surrounding brightness, when AUTO BRIGHT is set to
ON. The default setting is OFF.
11
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Pops up the
menu screen
Move where
you want to
adjust
Select a
menu icon
Adjust the
status
Exit from the
menu screen.
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
3
Use the
/ Buttons to adjust the image to the desired level.
Use the AUTO/SET Button to select other sub-menu items.
4
Press the MENU Button once to return to the main menu to select another
function. Press the MENU Button twice to exit from the OSD.
12
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
* : Analog Input only
Main menu
Sub-menu
Description
CINEMA
MODE
To focus on the moving picture
selected
AUTO
BRIGHT
To control screen brightness
automatically
TIME
CONTROL
To notify the user of a specified
time
LIVE
SENSOR
To turn the live sensor of the touch
button LED on or off
SMART
To adjust the SMART button
menus
EZ ZOOMING
To adjust the resolution
4:3 IN WIDE
To adjust the image size
PHOTO
EFFECT
NORMAL
To adjust the screen color mode
GAUSSIAN BLUR
SEPIA
MONOCHROME
F-ENGINE
MOVIE
To select or customize desired
image settings
INTERNET
USER
NORMAL
DEMO
13
On Screen Display(OSD) Selection and Adjustment
PICTURE
BRIGHTNESS
CONTRAST
GAMMA
To adjust the brightness,
contrast and gamma of the
screen
COLOR
PRESET
(sRGB / 6500K / 9300K)
To customize the color of the
screen
RED
GREEN
BLUE
TRACKING
To adjust the position of the
screen
* HORIZONTAL
* VERTICAL
* CLOCK
To improve the clarity and stability
of the screen
* PHASE
SHARPNESS
SETUP
LANGUAGE
OSD POSITION
(HORIZONTAL / VERTICAL)
* WHITE BALANCE
RTC
POWER INDICATOR
FACTORY RESET
To customize the screen
status for a user's operating
environment
NOTE
The order of icons may differ depending on the model (13~21).
14
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you press the
of the monitor.
MENU : Exit ,
: Move,
button on the front
SET : Select
Main menu
Description
CINEMA MODE To focus on the moving picture selected.
This function adjusts the brightness of areas other
than the user-selected area to provide an
environment and image quality optimized for videos
or moving picture on the web browser.
* This function is operated only if the 'forteManager' is
installed to PC.
AUTO BRIGHT
To control screen brightness automatically.
When ON is selected, this function adjusts the
screen brightness automatically, depending on the
surrounding environment, to provide optimal viewing
conditions. When OFF is selected, this function is
turned off.
TIME CONTROL To notify the user of a specified time.
This function notifies the user that a user-specified time
(1 or 2 hours) has passed, which is done by displaying
the Alarm OSD and the LED blinking.
Time Options: OFF/1HOUR/2HOURS
LIVE SENSOR
To turn the live sensor of the touch button LED ON or
OFF. This function senses the user’s fingers and
turns on the button LEDs before users press the
buttons, for easier operation.
* LED may start to work when an electrical
environment is formed (i.e. human body proximity).
SMART
To adjust the SMART button menus.
This function adjusts AUTO BRIGHT, TIME
CONTROL and LIVE SENSOR.
When ON is selected, AUTO BRIGHT and LIVE
SENSOR are turned on and TIME CONTROL is set
to 1HOUR. When OFF is selected, all these
functions are turned off. When AUTO BRIGHT,
TIME CONTROL and LIVE SENSOR are set
individually, each setting is changed to USER
automatically.
15
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you press the
of the monitor.
button on the front
MENU : Exit
: Move
SET : Select
Main menu
EZ ZOOMING
Description
To select the display resolution.
When you select 'EZ ZOOMING' in OSD, display
resolution goes one step down so characters and
images look bigger. When you select EZ
ZOOMING once again, it goes back to the
original resolution.
* This function is operated only if the 'forteManager' is installed to PC.
4:3 IN WIDE
To select the image size of the screen.
WIDE
• WIDE
• 4:3
PHOTO
EFFECT
Use the AUTO/SET button
to go to sub-menu.
4:3
: Switch to full screen mode
according to input image signal.
: Change the input image signal ratio to
4:3.
To select the color effects of the screen.
• NORMAL
The PhotoEffect function is disabled.
• GAUSSIAN BLUR
This menu changes the screen to be more
colorful and smoother.
• SEPIA
This menu changes the screen to be Sepia
tone (brown color).
• MONOCHROME
This menu changed the screen to be Gray
tone(black-and-white Picture) .
NORMAL
16
GAUSSIAN BLUR
SEPIA
MONOCHROME
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you press the
front of the monitor.
button on the
Menu Name
Icons
MENU : Save & Exit
,
: Move
Sub-menu Name
F-ENGINE
Active state
Inactive state
When the F-ENGINE is executed, two kinds of tones
are displayed as shown in the image. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting.
Main menu
Sub menu
Description
MOVIE
This feature lets you easily select the best desired
image condition optimized to the environment
INTERN (ambient illumination, image types etc).
ET
MOVIE: For animation images in videos or movies
INTERNET: For text images (Word processing etc.)
USER
To adjust the USER sub-menu function,
press the AUTO/SET Button
USER
You can manually adjust ACE or RCM.
You can save or restore the adjusted value even
when using a different condition.
• ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
Not applied
Weak clarity and luminosity contrast.
Strong clarity and luminosity contrast.
• RCM (Real Color Management): Selects the color mode.
Not applied
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
NORMAL
DEMO
Green enhance
Salmon color tone
Color Enhance
This is under normal operating conditions.
* Normal mode is when f-ENGINE is turned off.
This is used for advertising in the store. The screen will
be divided to show the standard mode on the left and
video mode on the right so that the consumers can
check the difference after applying the video mode.
17
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main
menu of the OSD appears.
Main Menu
MENU
: Exit
: Adjust (Decrease/Increase)
SET
: Enter
: Select another sub-menu
: Restart to select sub-menu
Button
Tip
Menu Name
Submenus
Icons
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
18
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
BRIGHTNESS To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
PRESET
Select the screen color.
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
GREEN
Set your own green color levels.
MENU : Exit
BLUE
: Decrease
: Increase
SET : Select another sub-menu
Set your own blue color levels.
19
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
HORIZONTAL To move image left and right.
VERTICAL
To move image up and down.
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
SHARPNESS
: Increase
SET : Select another sub-menu
20
To adjust the clearness of the screen.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
SETUP
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
RTC
If you set ON, you enable the Response
Time Control function and reduce the
afterimage of the screen.
If you set OFF, you disenable the
Response Time Control function and
operate at panel response time.
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the , buttons to reset immediately.
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
white balance function again. This function will be enabled only when the input signal is an analog signal.
21
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power indicator
light on?
• Press the Power button.
● Is the power on and the • Adjust the brightness and the contrast.
power indicator red?
● Is the power indicator
blinking?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
22
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
23
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA
DDC) monitor found" message?
● Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
24
Specifications
Display
20 inches (50.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 50.8 cm
0.2766 x 0.2766 mm (Pixel Pitch)
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
SOG (Sync On Green), Digital
Video Input
Signal Input
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution
Max
Recommend
VESA 1600 x 900 @60 Hz
VESA 1600 x 900 @60 Hz
Plug&Play
DDC 2B
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
& Weight
With Stand
Width 48.91 cm / 19.26 inches
Height 38.16 cm / 15.02 inches
Depth 19.84 cm / 7.81 inches
:
≤
≤
38 W(Typ.)
1W
1W
Weight(excl. packing)
Without Stand
Width 48.91 cm / 19.26 inches
Height 37.08 cm / 14.60 inches
Depth 8.49 cm / 3.34 inches
4.6 kg (10.14 lbs)
Range
Tilt : -2˚~15˚
Power Input
AC 100-240V~ 50/60Hz 0.7A
Environment
al Conditions
Operating Conditions
Temperature
10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature
-20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached (
Power cord
Wall-outlet type
), Detached ( O )
NOTE
Information in this document is subject to change without notice.
25
Specifications
Preset Modes (Resolution)
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
12
*13
VGA
VGA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
MAC
VESA
VESA
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
60.000
70
70
60
75
60
75
75
60
75
75
65
60
60
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1600 x 900
*Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
Red
Red Blinking
Off
26
Digitally yours