LG FB164 User guide

FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 1
User Guide
FB164 (FB164, FBS164V)
ENGLISH
As an ENERGY STAR® Partner,
LG has determined that this
product or product models meet
the ENERGY STAR® guidelines for
energy efficiency.
ENERGY STAR® is a U.S. registered mark.
P/NO : MFL62755708
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
2
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit ;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the
assembly. To prevent contamination of the environment and bring on possible threat
to human and animal health, the old battery or the battery put it in the appropriate
container at designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free reimbursement
systems batteries and accumulators.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 3
Welcome to your New DVD MICRO Hi-Fi SYSTEM
Contents
Setting up
Main Unit
Remote control
OSD initial language settings - Optional
Initial settings the Area Code - Optional
Adjusting the general settings
Setting the Clock
TV sound EZ setup
Displaying disc information
Playing a Disc or file
Listening to the radio
Listening to music from your portable player
Using an USB device
Recording to USB
Language Codes
Area Codes
Troubleshooting
Types of Playable Discs
Specifications
4
5
6
7
7
8-9
10
10
11
11-13
14
15
15
16
17
17
18
19
20
Precautions in using the touch buttons
• Use the touch buttons with clean and dry hands.
- In a humid environment, wipe out any moisture on the touch buttons
before using.
• Do not press the touch buttons hard to make it work.
- If you apply too much strength, it can damage the sensor of the
touch buttons.
• Touch the button that you want to work in order to operate the function
correctly.
• Be careful not to have any conductive material such as metallic object
on the touch buttons, and it can cause malfunctions.
3
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 4
Setting up
Connecting your unit to your TV and aerials.
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV and choose the A, B connection. Picture quality improves in order from A to B.
SCART connection (A)
Component Video connection (B)
Connect the COMPONENT VIDEO
(PROGRESSIVE SCAN) OUTPUT jacks
on the unit to the corresponding input
jacks on your TV using a Y PB PR cable.
- If your TV accepts progressive format
signals, you must use this connection
and set [Progressive Scan] in [Display]
setup to [On] (See page 8).
Connect the TO TV jack on
the unit and your TV using
the SCART cable.
PB
MENT
COMPO
VIDEO
MONITOR
PR
EURO
E SCAN)
RESSIV
(PROG
AV
Y
MENT
COMPO
VIDEO
E SCAN)
RESSIV
(PROG
T
OUT PU
+
Stretch the FM aerial.
The reception will be at its best
when the end of the aerial is
stretched to be in a straight line
and horizontal.
b Plug the unit plug into a wall socket.
4
NNA
OPTIC
AL IN
Video Out connection (A)
Connect the VIDEO
OUTPUT(MONITOR) jack on
the unit to the corresponding
input jack on your TV using a
Video cable.
ANTE
Connect the speaker cables to the player
To connect the cable to the unit, press each plastic
finger pad to open the connection terminal. Insert
the wire and release the finger pad.
Connect the black end of each wire to the
terminals marked -(minus) and the other end to the
terminals marked + (plus).
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 5
Main Unit
TOP
FUNC.
(Function) Selects the function.
1 /]] (Power)
Turn the unit on and off.
USB REC.
Recording to USB.
Disc Slot
• Do not push a disc forcibly into the CD slot.
• Do not pull or push a disc while a disc is ejected.
• Press Z again to reinsert the disc after ejecting it.
• pick it to the CD slot with the label side toward
Z
Ejects or insert the disc from slot loader.
USB Port
FRONT
Display Window
x STOP
Stop
] II / ii ]
Scanning/ Tuning/ Searching
B/X
Play/ Pause
VOL +/Volume control
EQ/ DEMO
You can choose fixed sound impression.
Press DEMO in power off state to demonstrate the
function on display window. To cancel it, press 1 /]]
or DEMO again.
VOL +
VOL
Power Save Mode
You can set up the unit into an economic power
save mode. In power-on status, press and hold
1 /]] button for about 3 seconds.
- Nothing is displayed in the display window when
the unit is turned off.
To cancel, press 1 /]] , CLOCK, TIMER or
EQ/DEMO.
-
CLOCK
(See “Setting the Clock” )
TIMER
(See the “Using your player as an alarm clock”)
SET
Confirms the settings.
PORTABLE IN
For connecting a portable device and listening to
sound of it through this system’s speakers.
PHONES
Headphone jack
MIC 1, 2
Microphone Jack 1,2
5
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 6
Remote control
RETURN (O) : Moving backwards in the menu or exited
the setup menu.
REC (z) : USB Direct Recording
STOP (x) : Stops playback or recording.
PLAY (B), MO./ST. : Starts playback. Selects Mono/
Stereo.
PAUSE/STEP (X) : Pause playback
SKIP (./>) : Go to next or previous chapter/ track/
file.
bb/BB) : Search backward or forward.
SCAN (b
FUNCTION : Selects the function and input source.
SLEEP : You can select delay time between 10 and 180
minutes, after the player will turn off. To check the
remaining time, press SLEEP. (Dimmer : Press SLEEP
once. Dims the LED (Light-emitting diode) of front panel by
half in power-on status.)
1 POWER : Switches the unit ON or OFF.
Z OPEN/CLOSE : Opens and closes the disc Drawer.
TITLE : If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may not
appear.
DISPLAY : Accesses On-Screen Display.
TV Control buttons : Controls the TV. (LG TV only)
Controlling the TV.
You can control the sound level, input source, and
power switching of LG TVs as well. Hold POWER (TV)
and press PR/CH (+/–) button repeatedly until the TV
turns on or off.
PROG./MEMO. : Accesses or removes Program menu.
CLEAR : Removes a track number on the Program List.
ECHO VOL.: Adjusts echo volume.
MIC VOL.: Adjusts microphone volume.
VOCAL FADER: You can enjoy the function as karaoke,
by reducing singer vocal of music in the various source.
MENU : Accesses the menu on a DVD disc.
SETUP : Accesses or removes setup menu
PRESET (U u) : Selects programme of Radio.
TUN. (-/+) : Tunes in the desired radio station.
U u I i (up/ down/ left/ right ): Used to navigate onscreen
displays.
ENTER : Acknowledges menu selection.
tSPK : To select the AUX OPT directly.
TVt
MUTE : To mute the sound.
VOL (Volume) (+/-) : Adjusts speaker volume.
EQ/ LG EQ (Equalizer effect) : You can choose sound
impressions.
Put the battery into the remote control.
Make sure that the + (plus) and - (minus) on the
battery match those on the remote control.
6
REPEAT/RANDOM : To select a play mode. (repeat/
random)
SUBTITLE : During playback, you can select a desired
subtitle language.
0-9 numerical buttons : Selects numbered options in a
menu.
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 7
OSD initial language settings
- Optional
Initial settings the Area Code
- Optional
During the first use of this unit, the initial language setup menu
appears on your TV screen. You must complete initial language
selection before using the unit.
When you use this unit for the first time, you have to set the Area Code
as shown below.
ON REMOTE
ON REMOTE
1 Display setup menu
1 Turn the power on
The language list appears
POWER
2 Select LOCK menu on the first level
SETUP
Uu
i
2 Select the language
IiUu
3 Press
ENTER
3 Move to second level
The activated Area Code appears on the
second level.
4 To confirm press
ENTER
4 Move to the third level
i
5 Enter a new password
Numeric (0-9)
and ENTER
6 Recheck the entered new password
Numeric (0-9)
and ENTER
7 Select a code for a geographic area
After select, Rating and Password will be
activated.
UuIi
8 To confirm what you press
Make sure to finish setting the Area Code.
ENTER
7
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 8
Adjusting the display settings
Adjusting the general settings
ON REMOTE
1 Display setup menu
2 Select a desired option on the first level
3 Move to the second level
4 Select a desired option on the second level
5 Move to the third level
6 Change the setting
SETUP
Uu
i
Uu
i
U u, ENTER
Adjusting the general settings - more you can do
Adjusting the language settings
OSD (Menu Language) – Select a language for the Setup menu and onscreen display.
Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/
Disc Subtitle/ Disc Menu.
[Original] : Refers to the original language in which the disc was recorded.
[Other] : To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language
code list in the reference chapter (Page 17). If you make a mistake
before pressing ENTER, press CLEAR.
[Off] (for Disc Subtitle) : Turn off Subtitle.
8
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9] Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
wide screen programs and films to be displayed on your TV
screen.
[Letterbox]
This displays a wide screen picture with black bands at
the top and bottom of the screen.
[Panscan]
This fills the entire 4:3 screen, cropping the picture as
necessary.
TV Output Select – Select an option according to the TV connection type.
[RGB] : When your TV is connected with the SCART jack.
[YPbPr] : When your TV is connected with the
COMPONENT/ PROGRESSIVE SCAN jacks on the unit.
- If you change TV Output Select to RGB from YPbPr on the setup menu
especially when connecting the unit in the way of component video
connection, the screen turns black. In that case, connect the video cable to
MONITOR jack and select YPbPr on the setup menu again.
Progressive Scan (For Component Video connections) – Selects whether
the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks output progressive
signal. If your TV accepts progressive format signals, you will enjoy accurate
color reproduction and high quality image by selecting [On]. If your TV does not
accept progressive format signals, select [Off].
If you set Progressive Scan to [On] in error, you must reset the unit. First,
remove the disc in the unit. Next, press and hold STOP for five seconds. The
video output will be restored to the standard setting, and a picture will be visible
on your TV.
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 9
Adjusting the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo.
This function is effective for multi-channel karaoke DVDs only.
Adjusting the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so.
1 Enter a 4-digit password then press ENTER.
2 Enter it again then press ENTER to verify. If you make a mistake while
entering number, press CLEAR then correct it.
Area Code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 17.
Rating – Select a rating level. The higher the level is, the stricter the rating.
Select [Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New] Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change] Enter the new password twice after entering the current password.
If you forget your password you can reset it.
1 Remove the disc in the unit.
2 Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER.
The password has now been cleared.
Adjusting the others settings
DivX(R) Registration – We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX®
VOD service.
For more information, visit www.divx.com/vod.
Press ENTER and you can view the registration code of the unit.
- In case that a fanfare or score appears when a chapter of a movie file is
changed during playback, set the Semi Karaoke to “Off” at the setup menu
or disconnect the microphone.
SSR (Real Time Score) - This function will be shown the Score to real time by
checking interval and beat during sing a song in the karaoke mode only.
Select the [On] : Score bar shows while checking the interval and beat.
Select the [Off] : Score bar are not display on the screen.
- This function is not supported the Semi karaoke mode.
Enjoying a pre-programmed sound field
The system has a number of pre-set surround sound fields. You can select a
desired sound mode by using EQ/ LG EQ. The displayed items for the
Equalizer may be different depending on sound sources and effects.
NATURAL
You can enjoy comfortable and natural sound.
Local
specialization
equalizer
Regionally optimized sound effect. (DANGDUT/
ARABIC/ PERSIAN/INDIA/ REGUETON/ MERENGUE/
SAMBA/ SALSA)
AUTO EQ
Realizes the sound equalizer that is the most similar to the
genre of which is included in the MP3 ID3 tag of song
files.
POP
CLASSIC
JAZZ
ROCK
This program lends an enthusiastic atmosphere to the
sound, giving you the feeling you are at an actual rock
pop, jazz or classic concert.
MP3 OPT
This function is optimized for compressible MP3/WMA file.
It improves the bass sound.
XDSS ON
Reinforce the treble, bass and surround sound effect.
VIRTUAL
You can enjoy more virtual surround sound.
NORMAL
You can enjoy the sound without equalizer effect.
Semi Karaoke – When a chapter/ title/ track is fully finished, this function
shows the score in the screen with a fanfare sound.
Available discs for the Semi Karaoke function: DVD discs/ DVD Karaoke Discs
[On] : When you finished singing a score will appear on the screen.
[Off] : Fanfare and score do not appears on the screen.
- This function operate on the DVD/CD mode.
- The Semi Karaoke function is available only when a microphone is connected.
9
10/19/09
9:28 AM
Page 10
Setting the Clock
TV sound EZ setup
ON UNIT
1 Turn the power on
2 Press for at least 2 seconds
3 Choose from either
AM 12:00 (for an AM and PM display) or
0:00 (for a 24 hour display)
4 Confirm your selection
5 Select the hours
1 /]]
You can enjoy to sound from TV, DVD and Digital Device. Even in
power off mode, if you press TVtSPK, then power is on and
automatically changed to AUX OPT mode.
CLOCK
] II / ii ]
SET
ON REMOTE
1 Connect the unit’s OPTICAL IN jack
to jack on optical out of your
TV (or Digital Device etc).
PR
MONITOR
FB164-F0U_DRUSLL_ENG_5708
AV
EURO
] II / ii ]
Y
ENT VIDEO
COMPOM
6 Press
7 Select the minutes
8 Press
SSIVE
(PROGRE
SCAN)
OUT PUT
SET
+
] II / ii ]
SET
OPT
ANTEN
ICAL
IN
NA
Using your player as an alarm clock
1 Press TIMER. Each functions flashes.
2 Press SET when the function you want to be woken by is showing.
3 “ON TIME” will be displayed. This is where you set the time you want the
alarm to start. Use ] I I / i i ] to change the hours and minutes and SET to
save.
4 The “OFF TIME” will be displayed. This is where you set the time you want
the function to stop.
5 Use ] I I / i i ] to change the hours and minutes and press SET
to save.
6 You will be shown the volume (VOL) you want to be woken by. Use
] I I / i i ] to change the volume and SET to save. Switch the system off.
The clock icon “
” shows that the alarm is set.
7 When the system is turned off you can check the time the alarm and turn the
alarm on and off by pressing TIMER.
10
2 Select the AUX OPT
To select the AUX OPT directly.
TVtSPK
3 Enjoy sound
4 To escape from AUX OPT
TVtSPK
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 11
Displaying Disc information
Playing a Disc or file
ON UNIT
ON REMOTE
1 Press
DISPLAY
Uu
2 Select an item
Ii
3 Adjust the display menu settings
O RETURN
4 To return the exit
2 Select a DVD/CD
FUNC.
You can select an item by pressing U u and change or select the setting by
pressing I i.
Current title (or track/ file)
number/ total number of titles (or tracks/ files)
Current chapter number/ total number of chapters
Elapsed playing time
Selected audio language or channel
DVD and finalized DVD±R/RW
DivX files
DivX
JPEG files
JPG
B PLAY
x
x STOP
Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG
When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and
JPEG files together, you can select menu of files which you would like to play
by pressing MENU.
WMA
DivX
ACD
JPG
Press and hold U u to move to the previous or next page.
Playing a DVD that has a menu
DVD
MP3 files
MP3
Most DVDs now have menus which load first before the film begins to play.
1 You can navigate these menus using U u I i to highlight an option.
2 Press PLAY to select.
WMA files
WMA
Skipping to the next/ previous chapter/ track/ file
Audio CDs
ACD
Symbol Used in this Manual
ALL
B/X
Playing a Disc or file - more you can do
MP3
Selected sound/ EQ mode
DVD
5 To stop the Disc playing
Moving to the previous/ next page on the file list menu
Selected subtitle
Selected angle/ total number of angles
All discs and file listed below
FUNCTION
IiUu
3 Adjust the menu settings /
Select a file from the menu
4 Start the Disc playing
Displaying Disc Information - more you can do
ON REMOTE
1 Insert a disc on unit
MP3
WMA
DVD
DivX
ACD
Press SKIP (>) to move to the next chapter/ track/ file.
Press SKIP (.) to return to the beginning of the current chapter/ track/ file.
Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file.
11
FB164-F0U_DRUSLL_ENG_5708
Pausing playback
10/19/09
9:28 AM
Page 12
Viewing the Title menu
ALL
DVD
1 Press PAUSE/STEP (X) to pause playback.
2 Press PLAY (B) to continue playback.
Press TITLE to display the disc's title menu, if available.
Frame-by-Frame playback
Searches for the starting pointing of entered time code.
1 Press DISPLAY then select clock icon.
2 Enter a time then press ENTER.
For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter
“11020” by using numerical buttons and press ENTER. if you enter the wrong
number, press CLEAR to enter again.
DVD
Starting play from selected time
DivX
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.
Playing repeatedly or randomly MP3
WMA
DVD
DivX
ACD
Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will
be played back repeatedly or randomly.
To return to normal playback, press REPEAT/RANDOM repeatedly.
- Random play mode : only music files.
Fast forward or fast reverse
MP3
WMA
DVD
DivX
ACD
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY (B) to continue play at normal speed.
Slow down the playing speed
DVD
While playback is paused, press SCAN (bb or BB) to slow down forward or
reverse playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal
speed.
1.5 times faster playback
DVD
Press PLAY (B) when a DVD is already playing to watch and listen to a DVD
1.5 times faster than normal playback speed. “B x1.5” will appear in the screen.
Press PLAY (B) again to return to normal playback speed.
Selecting a subtitle language
DVD
DivX
During playback, press SUBTITLE repeatedly to select a desired subtitle
language.
Changing the character set to display DivX ® subtitle correctly
- Optional DivX
1 If the subtitle does not display properly during playback, press and hold
SUBTITLE for about 3 seconds to display the language code menu.
2 Press SUBTITLE repeatedly to change the language code until the subtitle is
displayed properly.
12
Last Scene Memory
DVD
DivX
DVD
This unit memorizes the last scene from the last disc that is viewed. The last
scene remains in memory even if you remove the disc from the player or switch
off (Stand-by mode) the unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Creating your own program ACD
MP3
WMA
You can play the contents of a disc in the order you want by arranging the order
of the music on the disc. The program is cleared when the disc is removed.
1 Select a desired music then press PROG./MEMO. or select “
“ and then
press ENTER to add the music to the program list.
2 To add all music in the disc, select “
” and then press ENTER.
3 Select a music from the program list then press ENTER to start programmed
playback.
4 To clear a music from the program list, select the music you want to clear then
press CLEAR or select “
” icon and then press ENTER. To clear all music
from the program list, select “
” then press ENTER.
Displaying file information (ID3 TAG) MP3
You can check the ID3 TAG information of MP3 files only in discs by pressing
DISPLAY repeatedly.
Viewing photo files as a slide show
JPG
1 Use U u I i to highlight (
) icon then press ENTER to start slide Show.
2 You can change slide show speed using I i when (
) icon is highlighted.
Skipping to the next/ previous photo
JPG
Press SKIP (. or >) or I i to view the previous/ next photo.
FB164-F0U_DRUSLL_ENG_5708
Rotating a photo
10/19/09
9:28 AM
Page 13
JPG
Use U u to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five
minutes.
System Select - Optional
You must select the appropriate system mode for your TV system. If “NO DISC”
appears in the display window, press and hold PAUSE/STEP (X) for more
than five seconds to be able to select a system. (PAL/ NTSC/ AUTO)
VOCAL FADER
You can enjoy the function as karaoke, by reducing singer vocal of music in the
various source. (MP3/ WMA/ CD/ etc.) Press the VOCAL FADER, and “FADE
ON” will appear in display window.
To cancel it, press VOCAL FADER again.
- This function is available to use only when a microphone is connected.
- The quality of the VOCAL FADER may be different depending on the
recording conditions of music files.
- It is not available on the MONO mode.
Playable file requirement
DivX
• Available resolution: within 800x600 (W x H) pixels
• The file name of the DivX subtitle should be entered within 45 characters.
• If there is impossible code to express in the DivX file, it may be displayed as
“ _ ” mark on the display.
• If the video and audio structure of recorded files is not interleaved, either
video or audio is outputted.
• Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx”
• Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha
(*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt)
• Playable Codec format : “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”,
“3IVX”
• Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”
• For Discs formatted in Live file system, you can not it on this player.
• If the name of movie file is different from that of the subtitle file, during
playback of a DivX file, subtitle may not be display.
• If you play a DivX file differ from DivX spec, it may not operate normally.
MP3/ WMA
• Sampling frequency : within 32 - 48kHz (MP3/ WMA)
• Bit rate : within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA)
• File extensions : “.mp3”/ “.wma”
• CD-ROM file format : ISO9660 LEVEL 1 / JOLIET
• We recommend that you use Easy-CD Creator, which creates an ISO 9660
file system.
• They should not contain special letters such as / ? * : “ < > l etc.
• The total number of files on the disc should be less than 999.
This unit requires discs and recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many different types of
recordable disc formats (including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see above) to ensure
Compatible playback.
Customers should note that permission is required in order to
download MP3/ WMA files and music from the Internet. Our company
has no right to grant such permission. Permission should always be
sought from the copyright owner.
JPG
• Normal: 5120 x 3840, Progressive jpeg : 2043 x 1536
• Recording condition: ISO9660 LEVEL 1/ JOLIET
• Maximum files : Under 999.
• Some discs may not operate due to a different recording format or the
condition of disc.
• File extensions: “.jpg”
13
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 14
Listening to the radio
Be sure that FM aerial is connected.
ON UNIT
1 Select FM
2 Select a radio station
FUNC.
] II / ii ]
3 To save a radio station
A preset number will show in
the display.
4 Select the preset number
Up to 50 radio stations can
be saved.
5 To confirm press
ON REMOTE
FUNCTION
TUN.- / +
PROG./MEMO.
PRESET U u
PROG./MEMO.
Listening to the radio - More you can do
Looking for radio stations automatically
Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROG./MEMO. for two seconds.
- “ERASE ALL” will flash up on the display.
2 Press PROG./MEMO. to erase all saved radio stations.
Improving poor FM reception
Press PLAY (B) (MO./ST.) on the remote control. This will change the tuner
from stereo to mono and usually improve the reception.
14
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 15
Listening to music from your
portable player
Using an USB device
You can enjoy media files saved on an USB device by connecting it to
the USB port of the unit. If you want to operate other function, see the
Playing a Disc or file section.
The unit can be used to play the music from many types of portable
player.
ON UNIT
ON UNIT
ON REMOTE
ON REMOTE
1 Open the USB port cover.
1 Connect the portable player
to the PORT.IN (PORTABLE IN)
connector of the unit.
2 Connect the USB device to
the USB port of the unit.
3 Select the function.
FUNC.
FUNCTION
B/X
B PLAY
x
x STOP
FUNC.
FUNCTION
Uu
4 Select a file you want to play.
5 Start your media playing.
6 To stop, press
7 Before disconnecting, you have
to change to any other function.
2 Turn the power on.
3 Select the function.
Turn on the portable player and
start it playing.
1 /]]
1 POWER
FUNC.
FUNCTION
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB2.0 or USB1.1.
• The USB function of this unit does not support all USB devices.
USB device requirement
Devices which require additional program installation when you have connected
it to a computer, are not supported.
Look out for the follows
•
•
•
•
•
•
•
•
•
Do not extract the USB device while in operation.
For a large capacity USB, it may take longer than a few minute to be searched
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the USB device is not
recognized.
Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
This unit is not supported when the total number of files is 1000 or more.
External HDD, Card readers, Locked devices, or hard type USB devices are
not supported.
USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
15
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 16
When you are recording, look out for the following
Recording to USB
ON UNIT
ON REMOTE
FUNC.
FUNCTION
USB REC.
z REC
x
x STOP
1 Connect the USB device to the
USB port of the unit.
2 Select a mode in which you want
to record (ex. CD/ TUNER/ ...)
Play a sound source first.
If you want to record desired music
file in disc to USB, play a file before
starting the recording.
3 Start the recording
4 To stop, press
Recording to USB - more you can do
• You can check the recording percentage rate for the USB record on the
screen during the recording.(AUDIO, MP3/ WMA CD only)
• During recording MP3/ WMA, there is no sound.
• When you stop recording during playback, the file that has been recorded at
that time will be stored.(AUDIO CD Only)
• Do not remove the USB device during USB recording. If not, an incomplete
file may be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
• Multi card reader device or External HDD can not be used for USB
recording.
• A file is recorded by 2 hours when you record for a long term.
• when you stop recording during playback, the file will not be stored.
• In the state CD-G disc, USB record is not operated.
• You may not record more than 999 files.
• The file number is saved automatically.
• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other sources
Recording Music file in disc source to USB
One track recording
If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
- The files in the sub-folders are not recorded during all track recording.
- If you want to all tracks recording during playback, press stop twice. check the
x”on the screen.
“x
Program list recording
USB records after creating your own program if you want to record the track
you want (AUDIO CD Only).
16
The making of unauthorized copies of copy-protected material, including
computer programs, files, broadcasts and sound recordings, may be an
infringement of copyrights and constitute a criminal offense. This
equipment should not be used for such purposes.
Be responsible
Respect copyrights
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 17
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
17
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 18
Troubleshooting
CAUSE
PROBLEM
CORRECTION
No power.
The power cord is disconnected.
Plug the power cord into the wall outlet securely.
No picture.
The TV is not set to receive the DVD signal.
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
The video cables are not connected securely.
Connect the video cables securely to both the TV and unit.
The DVD picture quality is poor.
The disc is dirty.
Clean the disc using a soft cloth with outward strokes.
A DVD/CD will not play.
No disc is inserted.
Insert a disc
An unplayable disc is inserted.
Insert a playable disc (check the disc type, colour system and
regional code).
The disc is inserted upside down.
Place the disc the side you can see the printed side.
The menu is open on screen.
Press SETUP to close the menu screen.
There is a parental lock which prevents the playback of DVDs
with a certain rating.
Enter your password or change the rating level.
Humming noise heard while a
DVD or CD is playing.
The disc is dirty.
Clean the disc using a soft cloth with outward strokes.
The unit is located too close to the TV, causing feedback.
Move the unit and audio components further away from your
TV.
Radio stations can’t be
tuned in properly.
The aerial is positioned or connected poorly.
Check the aerial connection and adjust its position.
The remote control doesn’t
work well / at all.
18
Attach an external aerial if necessary.
The signal strength of the radio station is too weak.
Tune to the station manually.
No stations have been preset or preset stations have been
cleared (when tuning by scanning preset channels).
Preset some radio stations.
The remote is not pointed directly at the unit.
Point the remote directly at the unit.
The remote is too far from the unit.
Use the remote within 23 feet (7m) of the unit.
There is an obstacle in the path between the remote control
and the unit.
Remove the obstacle.
The battery in the remote control is flat.
Replace the battery with new one.
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 19
About the Symbol Display
“ ” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific DVD
video disc.
Types of Playable Discs
Type
Logo
DVD-VIDEO : Discs such as movies that can
be purchased or rented.
DVD-R : Video mode and finalized only
DVD-RW : Video mode and finalized only
DVD VR format that have been finalized can not be
played in this unit
DVD+R : Video mode only
Supports the double layer disc also
DVD+RW : Video mode only
Audio CD : Music CDs or CD-R/ CD-RW in music
CD format that can be purchased.
This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles,
DivX, MP3, WMA or JPEG files. Some DVD±RW/ DVD±R or
CD-RW/ CD-R cannot be played on this unit due to the recording
quality or physical condition of the disc, or the characteristics of the
recording device and authoring software.
“Dolby”and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Dolby Laboratories.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs. When setting
the option to Live File System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system for Windows Vista)
19
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 20
Specifications
General
Power supply
Refer to main label.
Power consumption
Refer to main label.
Net Weight
3.2 kg
Bus power supply (USB)
DC 5 V
500 mA
External dimensions
175 x 269 x 290 mm
(W x H x D)
Operating temperature
5°C - 35°C
Operating humidity
5% - 85%
Output power
80 W + 80 W
T.H.D
0.5 %
Tuner
FM Tuning Range
87.5 - 108.0 MHz or 87.50 - 108.00 MHz
DVD/CD
Frequency response
40 - 20000 Hz
Signal-to-noise ratio
75 dB
Dynamic range
75 dB
Available resolution according to connection
[COMPONENT VIDEO OUT]
[VIDEO OUT]
Speaker
Type
impedance
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
480p (or 576p) and 480i (or 576i)
480i (or 576i)
FBS164V
3Way 4Speaker
4Ω
80W
160W
132 x 320 x 300
4.5 Kg
Designs and specifications are subject to change without prior notice.
20
Notice (the date of the production of goods).
First figure ( of the left ) of series number means Year, next 2 figures
- Month of the production of this goods.
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 21
FB164-F0U_DRUSLL_ENG_5708
10/19/09
9:28 AM
Page 22
Web site
Telephone
êÓÒÒËfl
ru.lgservice.com
8-800-200-7676
ìÍ‡ªÌ‡
ua.lgservice.com
8-800-303-0000
азастан
kz.lgservice.com
8-8000-805-805
Å·ÛÒ
ru.lgservice.com
8-820-0071-1111
Latvija
lv.lgservice.com
8-0003-271
Lietuva
lt.lgservice.com
8-800-30-800
Eesti
ee.lgservice.com
800-9990