LG LAC-UA151 Owner's manual


Add to my manuals
18 Pages

advertisement

LG LAC-UA151 Owner's manual | Manualzz
LAC-UA150/151_ENG_40J
Car CD/MP3 Receiver
OWNER'S MANUAL
MODEL
:
LAC-UA150 / LAC-UA151
Please read this instruction booklet
before
connecting, operating
Internet address ;
or
carefully and completely
adjusting this product.
http://ua.lge.com
(380-44) 490-7777,
Customer Information Center LG ;
8-800-303-0000
Table of Contents
INTRODUCTION
Operation
TableofContents..................................2
with Audio
CD, MP3 Disc and CD changer
.
.
.
.
.
15-16
SafetyPrecautions.................................3
PlayinganAudioCDandMP3Disc.................15
BeforeUse......................................4-6
PlayingaCDchanger(OPTIONAL).................15
FrontPanel.......................................7
INTRODUC
REFERENCE
RemoteControl(OPTIONAL).........................8
Troubleshooting..................................17
PREPARATION
Specifications
Installation.......................................9
Connections...................................10-11
Disposal
OPERATION
product
European
a
Turningtheuniton..............................12
Turningtheunitoff..............................12
of
.
.
.
.
.
.
.
disposal
of your old
appliance
will
help
more detailed information about disposal of your old
appliance, please contact your city office, waste
disposal service or the shop where you purchased the
product.
Listeningtoradiostations........................14
.
products should be disposed
municipal waste stream via desigfacilities appointed by the government or
from the
environment and human health.
AutoSearchMemory............................14
.
separately
4. For
RadioOperation..................................14
.
to
prevent potential negative consequences for the
SOUNDAdjustment.............................13
.
symbol is attached
by the
is covered
product
Directive 2002/96/EC.
3. The correct
Checkingtheclock..............................12
frequencies
the
the local authorities.
Settingtheclock...............................12
broadcast
means
nated collection
Adjustingthevolume............................12
recalling
it
2. All electrical and electronic
Selectingasource..............................12
and
appliance
1. When this crossed-out wheeled bin
BasicOperation................................12-13
Storing
of your old
14
2
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Warning:
cover or
To reduce the risk of electric
back of this
parts inside. Refer
Warning:
To reduce the risk of fire
expose this
moisture.
shock, do
product. There are
servicing to qualified
product
to
dripping
or
or
no
not
remove
the
CAUTION:
user-serviceable
service
electric
personnel.
shock, do
splashing water, rain,
This unit
employs
To
of this product, please read this owner's manual
proper
and retain for future reference should the unit require mainte-
ensure
carefully
not
nance, contact
or
Use of
those
To
Warning:
use
Due to
the unit
only
high temperature
installed in
Caution: Protect this
Caution: If the
product
battery
outside of the
unit, please
from moisture.
is disconnected
or discharged,
reprogrammed.
the
Laser
System.
an
authorized service location
controls, adjustments,
specified
or
the
(see
performance
service
of
procedure).
procedures
other than
herein may result in hazardous radiation exposure.
prevent direct exposure
to laser
beam, do
not
try
to open the enclosure.
Visible laser radiation when open. DO NOT STARE INTO BEAM.
a car.
memory will be erased and must be
a
use
preset
3
INTRODUC
Safety
To
ensure
manual
proper
carefully
Symbols
use
of this
Precautions
product, please
read this owner's
Notes
Handling
Discs
The
lightning flash symbol alerts you to the presence of
dangerous voltage within the product enclosure that may
a
Discs
Do not touch the
Used in this Manual
constitute
on
and retain for future reference.
edges
so
paper
or
that
tape
playback side of the disc. Hold the
fingerprints do not get on the surface.
on
Indicates hazards
likely
damage.
to
cause
harm to the unit itself
or
Storing Discs
playing, store the disc in its
direct sunlight or sources of heat
car exposed to direct sunlight.
NOTE
notes and
operating
features.
Cleaning Discs
Fingerprints and
TIP
Indicates
tips
the
the disc.
After
special
by
Never stick
risk of electric shock.
other material
Indicates
disc
and hints for
making
the task easier.
dust
on
the disc
and sound distortion. Before
cloth.
Wipe
Do not
use
case.
and
Do not expose the disc to
leave it in a parked
never
poor picture quality
clean the disc with a clean
can cause
playing,
the disc from the center out.
strong solvents such as alcohol, benzine, thinner, comcleaners, or anti-static spray intended for older
available
mercially
vinyl records.
This unit cannot be
(use
4
12cm discs
operated
only).
with 8cm disc
8cm
INTRODUC
Before Use
Use and
Installing
the
Pull out the
pencil
minus
of the remote control
care
(OPTIONAL)
the remote control
(OPTIONAL)
Point the remote control in the direction of the front
battery
tray outward
on
the back of the remote control with
point pen and insert the battery with
(-) poles pointing in the proper direction.
or
Using
ball
the
panel
to
operate.
a
plus (+)
NOTES
?
The remote control may not function
Do not store the remote control in
?
Do not let the remote control fall onto the
jammed
under the brake
Handling
?
This unit is
ground
?
When
or
in direct
properly
?
high temperatures
accelerator
sunlight.
or
sunlight.
floor, where it may become
pedal.
the Unit
designed
electrical
replacing
identically rated
to be
operated
on a
12 volt DC
negative
system only.
the
fuse, be
sure
to
use
fuseone with
an
amperage. Use of a fuse with a higher
amperage may cause serious damage to the unit.
?
Periodically wipe
a
NOTES
?
Use
?
Remove the
only
one
CR2025
battery
(3V)
lithium
battery.
if the remote control is not used for
a
long period
of time.
?
Do not
?
Do not handle the
?
Do not store the
?
recharge, disassemble,
In the event of
completely
battery
battery
heat
or
dispose
of the
battery
in fire.
with metallic tools.
with metallic materials.
battery leakage, wipe the remote
a new battery.
control
clean and install
5
the contacts
on
the back of the front
cotton swap moistened with alcohol.
panel
with
INTRODUC
Before Use
unit from theft
Protecting your
Attaching
The front
the
panel can be detached from the main body
protective case provided to discourage theft.
1. Press RELEASE
()
to open the front
Grip
the left side of the front
panel
and
panel.
pull
it
(
)
Align the left side of the panel
right side or the panel into the
gently
outward.
Take
care
not to
3. Put the front
grip
panel
it
tightly
or
into the
to
drop
it.
protective
panel
and stored in
RELEASE
2.
the front
case
provided
for safe
keeping.
Protective
Front
case
panel
6
with the
stopper, and then push the
unit until it clicks.
INTRODUC
Front Panel
1
2
3
4
5
6
7
8
9
INTRODUC
19
1
2
3
EJECT
(Z)
18
17
16
15
button
12
EQUALIZER/XDSS
(EQ/XDSS)
11
SELECTION
button
VOLUME
?
CONTROL UP/DOWN button
12
AUTO STORE/PRESET SCAN
CD
13
MP3 TRACK -/+10
SKIP(
?SEEK( -/+ )
?
)
buttons
14
buttons
REMOTE SENSOR
5
CD disc slot
16
6
DISPLAY WINDOW
17
?
MUTE button
CD
SEARCH(
)
TUNE (-/+) buttons
DISPLAY (DISP) button
RELEASE (
) button
?
15
(OPTIONAL)
buttons
(SEL.)
10
11
10
4
7
13
?
(VOL.-/+)
button
14
button
(AS/PS)
button
button
(D-/+)
(SHF) button
REPEAT (RPT) button
INTRO SCAN (SCAN) button
CD PLAY/PAUSE (
) button
SHUFFLE
18
BAND button
19
PWR button
?
13
?
8
9
FUNCTION
(FUNC)
14
15
16
,,,,
button
7
17
Preset Station buttons.
(1-6)
Remote Control
1
?
(OPTIONAL)
POWER/MUTE
?
(
)
-
-
Switches the unit ON
-
-
Press to mute the
2
FUNCTION
Selects
2
3
?
-
?
-
-
3
?
-
?
-
?
a
(FUNC.)
?
function.
4
Preset Station buttons.
Starts
(1-6)
( B /X)
?
5
playback.
playback temporarily.
?
-
?
SCAN
the first 10 seconds of all tracks.
6
REPEAT
(RPT)
Plays tracks repeatedly.
4
7
7
?
SHF
Plays
track.
DISC SELECTOR
button
(D-/+)
tracks in random order.
?
-
8
BAND
SEL
Enters the audio
NUMBER
VOLUME(
Adjusts the
-
-
goes to the
Selects three FM and MW
Pauses
Plays
of the
beginning
or
(Optional)
0-9 number buttons
CD PLAY/PAUSE
)
/
playback.
previous
button
(
forward
Go to next track.
current track
speaker.
6
or
Returns to the
sound from the
1
Backward
search
and OFF.
5
SKIP/SEARCH
DISPLAY
settings.
(#)
/
)
volume level.
(DISP.)
Changes the display.
CLOCK (CLK)
Clock display.
(AM)
bands.
INTRODUC
Installation
Basic Installation
Before
the
installing, make sure that the ignition-switch
car battery terminal to avoid short-circuiting.
1.
Remove the
2.
Make the necessary connections.
3.
Install the
4.
Install the unit in to the
existing
mounting
Removing existing
If there
already
dashboard,
When
is
a
remove
1.
Remove the
Remove the front
rear
Insert the lever
of the
dashboard
PREATION
sleeve.
mounting
receiver unit
sleeve for the receiver unit in the
mounting
sleeve
mounting sleeve, proceed
as
follows.
panel
on
and trim
into the hole
ring
on one
the other side and
A
from the unit.
side of the unit. Perform the
pull
the unit out from the
mounting
ISO-DIN Installation
Slide the unit into ISO-DIN frame.
2.
Install
3.
Slide the unit and frame into the dash
4.
Mount the dash
5.
Mount the trim
6.
Install the
screws
A
support from the unit.
A
operation
the unit from the
sleeve.
pushing
to
the thickness
sleeve.
mounting
2.
1.
according
receiver unit.
the unit from the
removing
same
remove
it must be removed.
If you need to
3.
Bend the claws
is set to OFF and
removed from old unit.
panel
ring
or
opening.
adapter plate.
onto the unit.
faceplate by sliding
edge closed.
the
right edge
into
position
and then
the left
9
Connections
Connecting
Before
to the Car
connecting,
make
sure
that the
ignition
switch is set to
OFF, and
remove
the
battery
not
terminal of the to avoid short circuits.
PREATION
supplied
OPTIONAL
A
1 GND
(BLACK)
2 PHONE
C
B
(ORANGE)
3 DIMMER
(PINK)
4 TO IGNITION
DIMMER SWITCH
(RED)
CD CHANGER
(Optional)
IGNITION
SWITCH
5 TO BATTERY.
(YELLOW)
6 PWR ANT
(BLUE)
BATTERY
POWER
ANTENNA
1
2
CONTROL
RELAY
7 REMOTE ON
(BLUE/WHITE STRIPE)
POWER AMPLIFIER
(optional)
3
4
5
6
D
1
WHITE
2
WHITE/ BLACK STRIPE
3
GRAY
4
GRAY/ BLACK STRIPE
10
(FL -)
(FR -)
5
GREEN
6
GREEN/ BLACK STRIPE
7
VIOLET
8
VIOLET/ BLACK STRIPE
7
8
(FL +)
(FR +)
(RL +)
(RL -)
(RR +)
(RR -)
Connections
to the Car
Connecting
Connecting
From antenna
-
to
Auxiliary Equipment (OPTIONAL)
Connect the AUDIO OUTPUT connector of this unit to the
AUDIO INPUT connector of
To the
wiring
1 BLACK
:
This lead is for the
phone
line connection.
This lead is for the Dimmer line connection.
:
FL
4 RED
This lead is for connection to the power supply
terminal when the ignition switch is set to ACC.
:
5 YELLOW
:
This lead is for connection to the
(back-up) terminal
always supplied.
6 BLUE
:
FR
Connect the CD
?
Your
car
as
Speaker
as
shown
on
the control unit for
a
CD
changer
the scheme.
Connections
L
1
2
RL
FRONT
R
REAR
3
D
(Front Right)
(Rear Right)
To AUDIO IN
connection.
which you can buy later, if you have not yet done so.
The suitable cord will be provided together with the CD
changer
(Rear Left)
To AUDIO OUT
changer
receiver works
RL
RR
Battery
This lead is for the power antenna connection.
: This lead is for the remote amplifier
on
(Front Left)
from which power is
7 BLUE/WHITE STRIPE
?
Auxiliary Equipment.
This lead is for the Ground connection.
:
2 ORANGE
3 PINK
of vehicle Colors of leads
4
5
6
7
8
11
To AUDIO IN
PREATION
Basic
Turning
the unit
Press PWR
or
Operation
Adjusting
on
any other button
on
the front
the volume
Use VOLUME to
panel.
Press VOLUME
Turning
on
Selecting
You
can
the front
a source
Press FUNC to select
Tuner
→
CD
to turn the unit off.
Setting
you want to listen to.
within 5
a source.
repeatedly to switch between the following
CD Changer (optional)
Tuner...
→
sources:
→
to increase
or
the clock
seconds.)
2. Press
on
the front
3. Press
on
the front
panel
panel
to
to
adjust
adjust
4. Press DISP.
NOTE
?
panel
1. Press DISP and press DISP for more than 1 second.
(Clock indicator will be displayed for 5 seconds. Adust the clock
a source
select
Press FUNC
panel
front
decrease the volume.
the unit off
Press PWR
adjust the sound level.
(VOL.+/-) button on the
Checking
When you turn the unit off, the current volume level is automatically
memorized. Whenever you turn the unit back on, it will operate at the
You
memorized volume level.
12
can see
the clock
the clock
pressing
DISP.
the hour.
the minute.
OPERATION
Basic
SOUND
Using
Operation
Adjustment
the EQ
(Equalizer)
SELECTION
The
equalizer lets you adjust the equalization to match the
acoustic characteristics of the car's interior as desired.
There
3 stored
equalizer
curves
list of the
equalizer
curves:
are
which you
can
easily
1.
recall at
a
EQ POP
adjust
VOL
:
2.
Press CONTROL UP
sound
?
→
→
lights
up in the
TRB
(VOL.+)
or
following
BAL
FAD
DOWN
(VOL.-)
to
order.
adjust
the
quality.
Turn
VOL
Turn left
right
Increase the volume
Decrease the volume
level.
level.
Increase the bass
Decrease the bass
level.
level.
Increase the Treble
Decrease the Treble
level.
level.
→
BAS
MUTE
TRB
1. Press MUTE to cut the sound.
2. To cancel it press MUTE
to select the mode
volume, bass, treble, balance and
BAS
?
→
(SEL.) repeatedly
from
fader. The mode indicator
Reproduces pop music acoustics.
EQ CLASSIC : Reproduces orchestral music acoustics.
EQ ROCK : Reproduces rock music acoustics.
1. Press EQ/XDSS on the front panel to select the equalizer.
2. Press EQ/XDSS repeatedly to choose between the following
Equalizer settings.
POP
CLASSIC
ROCK
FLAT (NO display)
POP....
?
Button
Press the SELECTION
you want to
any time.
Here is
(SEL)
again.
BAL
Decrease the level of
Decrease the level of
the left
the
speaker(s).
right speaker(s).
FAD
Decrease the level of
Decrease the level of
the front
the
The unit cannot
adjust
speaker(s).
rear
speaker(s).
NOTE
XDSS
the bass and treble in the EQ
(Extreme Dynamic
Sound
mode.
System)
Press and hold the EQ/XDSS button to reinforce
surround effect.
13
on
treble, bass and
OPERATION
Radio
Operation
NOTES
to radio stations
Listening
1. Press the PWR button to turn the unit
-
When you select
on.
the unit is turned
a source
-
a
are
band.
seek
tuning,
press the
You
SEEK(-/+)
button with
-
the
frequencies
strong enough reception is found.
You
can
with
quick
scan
cancel seek
manual
-
until
tuning by pressing
a
broadcast with
When the selected
recalling
the
SEEK(-/+)
button
3.
press the
tuning,
move
up
or
down
TUNE(-/+)
frequency
is
being
button with
store up to six broadcast
"
one
As
?
When
a
To
scan
preset
same
on
1
preset other stations.
To
panel for about 1 second.
currently displayed frequency to
range, up to 18 station
can
erased.
on
the front
panel.
stop the scanning, press the AS/PS button.
preset stations
Press BAND to select the desired band and press the desired
number buttons
(1-6).
The number of the
preset station button is displayed and the
preset station is received.
once.
14
be
preset station button on which another
been preset, the previously preset
already
preset stations
To tune in the
the front
frequency
the
band has
automatically
the
same
Press the AS/PS button
strongest
Scanning starts from the
higher frequencies and stops when 6 stations have been
preset or the receivable frequencies have been scanned
-
1 and 2 to
station is
station of the
1. Press the FUNC button to select the tuner.
on
for later recall
frequency
F1, F2, F3 have the
preset for FM.
"
Memory
2. Press the AS/PS button
frequencies
button.
a
NOTES
station is
This function lets you automatically store the six
broadcast frequencies.
the AS/PS button.
frequencies
of the
displayed.
Repeat steps
?
step by step.
broadcast in stereo, the
broadcast
or
preset station buttons (1 6) for more than
seconds. The number of the pressed preset station button is
light.
Auto Search
-
easily
2. Press
NOTE
indicator will
and
press the BAND
presetting,
quick
presses.
perform
quick presses.
The frequencies
?
stop
can
erased.
the automatic
1. Select the desired
The tuner will
5. To
performed if there is no station to be tuned in.
presetting is performed, the previous preset stations
automatically
with the touch of
presses.
-
o
is not
presetting
Storing
displayed,
FM1, FM2, FM3, MW(AM).
perform
When automatic
?T
Press the BAND button until the desired band is
4. To
The
?
on.
2. Press the FUNC button to select the tuner.
3. Press the BAND button to select
?
OPERATION
Operation
Playing
CD
with Audio
CD, MP3 Disc and CD changer
Audio CD and MP3 Disc
an
The unit
MP3
CDC
1. Press PLAY/PAUSE
MP3 formatted
play
can
CD
Pause
MP3
recordings
on
CD-ROM, CD-R
2. To return to
or
( B /X) during playback.
playback, press PLAY/PAUSE ( B /X) again.
CD-RW discs.
Before
MP3
playing
Recordings on
recordings,
read the notes
on
Moving
MP3
page 18.
Press the
or
Playing
a
CD
changer (OPTIONAL)
Playback Setup
this CD
Audio
on
the audio
1. Press PWR to turn the unit
2. Select the CD
a
Search
system and select the input
Moving
on.
pressing FUNC repeatedly.
play into the magazine.
automatically.
changer
starts
function
to another Disc
twice
CDC
D(-/+) briefly during playback
previous disc.
to go to the next disc
or
step
back to the
15
point
CD
MP3
CDC
briefly during playback to go to the next
beginning of the current track.
briefly to step back to the previous track.
times is less then 3 seconds this function is not
CD
Press and hold the
the
disc you want to
Playback
Press
of this unit to the connector
connected to the unit.
source
3. Insert
Press
CDC
Changer connector
Changer on page 10.
system: Turn
CDC
to return to the
(If playing
Connect the CD
on
to another Track
you want.
track
operated.)
CDC
during playback
and then release at
OPERATION
Operation
with Audio
CD, MP3 Disc and CD changer
MP3 TRACK -10/+10
Repeat
1.
a.
Press RPT
during playback.
CD
MP3
Durning playback, press the -10 (D-)
button to go back to the previous -10 track, and press +10
button to go forward to the next +10 track.
CDC
The "RPT" appears in the display window.
(All of the music on the disc is played repeatedly)
b. Press and hold RPT
during playback.
2. Press RPT
For your reference
CDC
The "DRT" appears in the display window.
(All of the music on the discs in the CD changer is
?
played repeatedly)
Intro
1.
Press SHF
during playback.
CD
MP3
b. Press and hold SHF
during playback.
The "SHF"
b. Press and hold SCAN.
played randomly)
changer
is
display
cancelled.)
During random playback,
the previous track.
if you press
CDC
played)
CDC
(The
button, you won't go back
played)
again.
The "SCAN"
window.
NOTE
?
is
2. Press SCAN
in the
MP3
The "DSN" appears in the display window.
(The first 10 seconds of all of the music on the discs in the CD
again.
disappears
(The random playback
CD
The "SCAN" appears in the display window.
(The first 10 seconds of all of the songs on the disc is
CDC
The "DSF" appears in the display window
(All of the music on the discs in the CD changer is
scan
Press SCAN.
a.
CDC
The "SHF" appears in the display window.
(All of the music on the disc is played randomly)
2. Press SHF
ejected by pressing Z during playback, it will be
automatically after 10 seconds unless you pull out the disc
from the unit.
window.
Random
a.
Loading
loaded
disappears in the display
(The repeat mode is cancelled.)
1.
Auto
When the disc is
again.
The "RPT"
(D+)
intro
ID3TAG
to
When
disappears in the display
scan is cancelled.)
window.
MP3
playing a disc containing information, you can see the
(ID3 TAG, Title, Artist and Album) in the display win-
information
dow. If there is
display
no
information, "NO TEXT" will be shown in the
window.
Press the DISP button twice
16
during
MP3 file
playback.
OPERATION
Troubleshooting
Cause
Symptom
Power doesn't turn
on.
The unit doesn't
operate.
Leads and connectors
are
Correction
not
Confirm
properly
connected.
The fuse is blown.
with the
Noise and other factors
to
microprocessor
Playback
possible.
is not
The disc is
causing the
operate incorrectly.
Cables
are
are
that all connections
same
rate.
built-in
Turn the unit off and then
dirty.
The loaded disc is of
No sound is heard.
once more
type this unit
not connected
cannot
correctly.
play.
Check what
type the disc is.
Connect the cables
correctly.
not rise.
no
sound.
There's audio
skipping.
The volume level is low.
Adjust
This unit is not
Secure this unit
firmly
on.
Clean disc.
a
The volume level will
There's
are
correct.
Rectify the problem that caused the fuse to blow,
then replace it. Be very sure to install the correct
secured.
17
the volume.
firmly.
and
fuse
REF NC
Specifications
MP3 Disc
compatibility
with this unit is limited
General
as
OutputPower.........................50Wx4CH(Max.)
follows:
/ 8
1.
3.
4.
48kHz
Sampling Frequency
(MP3)
320kbps (include VBR) (MP3)
CD-R/CD-RW physical format should be "ISO 9660"
If you record MP3 files using software which cannot create a
FILE SYSTEM, for example "Direct-CD" etc., it is impossible to
playback MP3 files. We recommend that you use "Easy-CD
2. Bit rate / within 8
-
-
Creator" which creates
an
ISO9660 file
system.
PowerSource.................................DC12V
Speakerimpedance................................4Ω
GroundSystem...........................Negativetype
Dimensions (W x H x D)182 x 51 x 173 mm (Without Front Panel)
NetWeight(approx.).............................1.8kg
FM tuner
FrequencyRange......................87.5-107.9MHzor
87.5-108 MHz
Customers should also note that
permission
is
required
in
or
65-74
MHz,
87.5-108 MHz
S/NRatio......................................55dB
order to download MP3 files and music from the Internet. Our
Distortion.......................................1.0%
company has no right to grant such permission. Permission
should always be sought from the copyright owner.
Usablesensitivity..............................12dBμV
Notice
the
S/NRatio......................................45dB
First
left
(the date of
figure ( of the
production of goods).
) of series number means Year,
fig-
.
.
.
.
.
.
.
.
.
.
.
.520-1720kHzor522-1620kHz
Distortion.......................................1.0%
Usablesensitivity..............................32dBμV
ures
-
next 2
MW(AM) tuner
FrequencyRange.
Month of the
production
of this
goods.
CD
FrequencyResponse......................40-20000Hz
S/NRatio......................................70dB
Distortion......................................0.15%
Design
P/NO
:
3834RR00040J
and
specifications
are
subject
to
change
without notice.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement