LG TCH-700 Owner's manual
Add to my manuals
12 Pages
LG TCH-700 is a car stereo CD receiver with a wide range of features to enhance your in-car audio experience. With its intuitive front-panel controls and a detachable faceplate for added security, the LG TCH-700 offers both convenience and peace of mind. Enjoy your favorite CDs with crystal-clear sound thanks to its built-in CD player, and easily tune into your preferred radio stations with the AM/FM tuner. The TCH-700 also boasts preset station buttons, allowing you to quickly access your favorite channels at the touch of a button.
advertisement
▼
Scroll to page 2
of 12
MOSCOW_TCH-700(ENG)-F015W STEREO CAR CD RECEIVER OWNER'S MANUAL MODEL : To the features and functions of this fully enjoy TCH-700 new unit, recommend that you read this OWNER'S MANUAL carefully and completely. we Precautions CAUTION CAUTION Use of controls or of proresult adjustments or performance specified herein may cedures other than those RISK OF ELECTRIC in hazardous radiation exposure. SHOCK DO NOT OPEN Laser component in this product is capable of emitradiation exceeding the limit for Class 1. ting CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER CAUTION:INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. SERVICING TO QUALIFIED SERVICE PERSONNEL. VARNING:OSYNLIG LASERSTRALNING DENNA DEL AR OPPNAD STRALEN AR lightning flash with arrowhead symbol, an equilateral triangle is intended to within alert the user sure This label is located to the presence of uninsulated dangerous voltage product's enclosufficient magnitude to that may be of a risk of electric shock to persons. triangle on the interior. within the constitute The exclamation FARLIG. Attention:Quand l'appareil est ouvert, ne pas s'exposer aux radiations invisibles du faisceau laser. Explanation Graphical Symbols: The NAR point within an is intended to alert the equilateral user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. This CLASS 1 LASER KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER Compact Disc player product. is classified PRODUCT as a CLASS 1 LASER WARNING The CLASS 1 LASER PRODUCT label is located TO REDUCE THE RISK OF FIRE OF ELECTRIC the exterior. on SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The To avoid electrical shock, do not open the cabinet, Refer servicing to qualified personnel only. splashing apparatus shall such as and that not be exposed to dripping or objects filled with liquids, be placed on the apparatus. no vases, shall Warning: Do not install this a book case or equipment in a confined space such similar unit. Table of Contents INTRODUCTION OPERATION Precautions...............................2 BasicOperation............................8 TableofContents..........................2 RadioOperation...........................9 BeforeUse................................3 CDOperation.............................10 DetachingorAttachingtheFrontPanel. Front Panel/Rear Panel/Display Window. . . . . . . . . . . . . . . .3 . 4 BEFORE OPERATION Installations...............................5 Connections.............................6-7 2 REFERENCE Specifications............................11 Before Use Do not ? attempt rays from the the eyes. Make ? sure ing, or a pickup are dangerous to pins or other unit; they may safety hazard such foreign objects cause as do malfunction- ? ? CD on A defective soiled disc inserted into unit or can sound to drop out during playback. by holding its inner and outer edges. Handle the disc Do not touch the surface of the unlabeled side of the disc. electrical shock INTRODUC exposure of laser rays. or When your car is parked under direct sunlight in summer, there may be a considerable rise in temperature inside the car. Ensure to let the ? Notes ? cause that not inside the to disassemble this unit. Laser optical ambient ? Do not stick paper or on the surface. tape etc. temperature cool down before operating the unit. This unit is ? DC designed to be operated on a 12 negative ground electrical system only. When ? the replacing fuse, be sure to use volt ? Do not expose the disc to direct sunlight or excessive heat. the fuse whose amperage rating is identical. Use of a fuse with higher amperage may cause serious damage to the unit. ? Periodically wipe the contacts on the back of the front panel with a cotton swap moistened with ? Clean the disc before playback. Wipe the disc a cleaning cloth. from the center outward with ? alcohol. Never use solvents such as benzine or alcohol to clean the disc. ? This unit cannot be 8cm disc (using operated by 8cm 12cm disc only). Detaching Detaching You can or Attaching the Front Panel the Front Panel detach the front panel with you when you leave your Attaching the Front Panel from the unit and carry it car A unattended. B Press the RELEASE 1 2 3 front ) button ( to open the panel. Push the front panel to right. Pull the front 1 Join 2 3 Join C A on the front C on the front panel to B on the main panel to D on the main unit. panel. Place the front 4 D panel in the supplied protective case. Protective Front case panel unit while pushing Close the front the front pane to right. panel. Note Take not to care buttons, or drop put pressure on the the front panel. display or control 3 Front Panel/Rear Panel/Display Window 2 1 3456 SEEK INT RDM 12 14 13 15 RPT D- 19 10 SEEK 8 9 20 22 17 D+ 11 18 16 7 21 23 24 25 26 27 28 29 30 33 1. ? POWER ? CONTROL UP/DOWN DIAL (PWR) button 2. DISPLAY WINDOW 3. ?CDSKIP( SEEK (-) ? 15. 16. )button button 8. 9. MUTE button 6. 18. ANTENNA JACK 19. LINE OUT JACK 10. EQUALIZER 11. ? 12. button 22. STEREO indicator 23. MAIN DISPLAY SECTION 24. INTRO SCAN indicator (EQ) button Preset Station buttons CD PLAY/PAUSE (1~6) ) button 25. RANDOM indicator 26. REPEAT indicator 27. CD OPERATING indicator ? 28. DISC IN indicator ? 29. CD CHANGER indicator ? 30. VOLUME LEVEL indicator ? 31. LOUD indicator 13. CLOCK button 4 (OPTIONAL) 21. POWER/ SPEAKER CONNECTOR ( INTRO SCAN (INT) button REPEAT (RPT) button RANDOM (RDM) button DISC SELECT (D-,D+) button (OPTIONAL) BAND (BD) button ? (OPTIONAL) 20. CD CHANGER CONNECTOR ? 7. (SEL) button / ?TUNE( )button / ?CDSEARCH( )button EJECT ( ) button 17. CD disc slot (LOUD) button RELEASE ( ) button ?CDSKIP( )button SEEK (+) button AS/PS (auto store/preset scan) FUNCTION (FUNC.) button 5. 31 14. SELECTION LOUDNESS 4. 32 32. LEVEL indicator 33. EQUALIZER indicator (OPTIONAL) Installations Basic Installation Before make installing, is set to OFF and battery 1 2 3 4 to avoid that the sure remove ignition-switch the terminal of the car Remove the existing Bend the claws according short-circuiting. to the thickness receiver unit. of the BEFORPATIN dashboard Make the necessary connections. Install the installation sleeve. Install the unit in to the installation sleeve. Removing existing receiver unit If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. ISO-DIN Installation 1 2 3 4 5 Slide radio into ISO-DIN frame. Install screws removed from old radio. Slide radio and frame into dash Install dash Install trim The notch panel ring on positioned or opening. adapter plate. to radio. trim ring must be at the bottom. Install faceplate by fitting right position then pushing edge closed. 6 edge left When into removing the unit If you need to follows. 1 remove Remove the rear from the installation sleeve the unit from the installation sleeve, proceed as supporter from the unit. 2 Remove the control panel from the unit. 3 Insert the lever into the hole on one side of the unit, and pull the lever toward you. Do the same operation on the other side and pull out the unit from the installation sleeve. 5 Connections Precaution Before on connecting, connections making make sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits. Note Make correct connections Never use the as illustrated in the connection cord of each speaker in diagram. common. OPTIONAL WHITE RED A B D GROUND ACC C (BLACK) (RED) IGNITION SWITCH CD CHANGER (optional) BACK UP (YELLOW) 10A FILTER BOX AUTO ANT BATTERY (BLUE) POWER ANTENNA CONTROL RELAY POWER AMPLIFIER CONTROL LEAD POWER AMPLIFIER (optional) 1. VIOLET 2. VIOLET/ BLACK STRIPE 3. GRAY 4. GRAY/ BLACK STRIPE 5. GREEN 6. GREEN/ BLACK STRIPE 7. BROWN 8. BROWN/ BLACK STRIPE 6 s Connections From antenna From power To the amplifier's input jack (2 channel wiring of vehicle Colors of leads 1 Black (Ground lead to be connected to vehicle or 4 channel : optional) (metal) body.) 2 Red (ACC lead to be connected to the terminal from which the power is supplied when the ignition switch is set to ACC). 3 Yellow (battery lead to be connected to the backup terminal from which power is always supplied.) 4 Blue (To relay box for full automatic power antenna or power amplifier control lead.Power antenna load to be connected to the terminal of the control relay switch for vehicles equipped with a power antenna. This lead is not used for vehicles with manual or semiautomatic antennas.) Connect the CD Your changer(optional) receiver works as control unit for The suitable cord shown on the scheme will be car 2-Speaker a CD changer which you can buy, if not yet done, provided together with the CD changer. later. Connections L R 1 FRONT 2 s 3 4 4-Speaker Connections L RL R 1 FRONT REAR 2 3 s 4 5 6 7 8 7 BEFORPATIN Basic Operation Power ON and OFF ? ? SOUND Adjustment Press POWER (PWR) button or any other button to turn the unit on. (When you insert the CD in the CD slot, it is turned on.) Press POWER (PWR) to turn it off. (When the front panel is opened for more seconds, it is turned automatically off.) than 30 LOUDNESS Function Press the LOUDNESS MUTE Function Note When you turn off, the unit is memorized automatically the volume level currently before you turn off. Whenever ? MUTE button is ? The operated releasing mode pressed again. as muted state on/off. mute state is when any button is you turn on the unit, it will operate at the volume level memorized. EQUALIZER (EQ) Function CONTROL UP/DOWN DIAL other ? Each press of the EQ button switches the unit to the equalizer mode, as follows. After you have selected the proper mode by using the SELECTION (SEL) button, control the desired function ? by turning this dial within 6 seconds. After you finish selecting modes, the unit returns to the initial mode. Operating display in all modes: A numeric display is converted activates the (LOUD) button, loudness circuit which boosts to compensate the human ear's lack of sensitivity to bass at low levels. by turning POP CLASSIC ? POP ? CLASSIC ? ROCK ROCK Release POP .... Optimized for R&B, Soul and Country music : Optimized for orchestral music : Optimized for Hard Rock and Heavy Metal : music. this SOUND MODE dial. FUNCTION This button RADIO (FUNC.) serves to switch operation. (CD Beep Sound 1 Button over between CD and Press SELECTION ance), RADIO). (SEL) button repeatedly to select the mode you want to adjust from VOL (volume), BAS (bass), TRB (treble), BAL (baland FAD (fader). The mode indicator lights up in the following order. Function "BEEP ALL" Sound Mode 1. Press the SELECTION (SEL) button for more than 2 1 seconds. "BEEP ALL" window. or "BEEP 2ND" appear in the display Turn left adjust or beep sounds. "BEEP 2ND" Sound Mode 1. Press the SELECTION (SEL) button for than 2 seconds. "BEEP ALL" or "BEEP 2ND" appear in the window. display are pressed for more (SEL) (SEL) beep button to change display the level. Increase the treble Decrease the treble level. level. the speaker(s). the speakers. the bass and treble in the EQ rear speakers. the CLOCK once momentarily to the time. for 5 seconds. adjust right speaker(s). 2. Press the CLOCK (CLK) button for more than 2 seconds, and clock indication will be displayed Note mode. Decrease the bass level. 1. Press CLOCK (CLK) button control of volume, bass, treble, balance and fader. The unit cannot volume level. Increase the bass the front than 1 seconds, Button (SEL) volume level. Decrease the level of Decrease the level of Setting Press the SELECTION Decrease the the left sounds. SELECTION Turn left. right. Decrease the level of Decrease the level of 2. Turn left CONTROL UP/DOWN dial to select the buttons quality. Increase the more "BEEP 2ND" indicator. When Preset Station (1~6)and SELECTION CONTROL UP/DOWN dial to Turn 2. Turn right CONTROL UP/DOWN dial to select the "BEEP ALL" indicator. When any button is pressed, right the sound on Press to Press to Adjust the clock within adjust the hour. adjust the minute. 5 seconds. 3. Press the CLOCK (CLK) button, the display returns to the 8 previous display after 5 seconds. Radio Operation To the radio stations Presetting to 6 stations for each band Up and LW (optional) can FM1, FM2, FM3, MW be stored on the preset station buttons. scan the Press AS/PS preset stations (auto store/preset scan) button briefly. Each preset station is tuned in for 7 seconds in order. To stop the scanning, press AS/PS again or any of the preset station buttons (1 6). - Press BAND to select the desired band. 1 If - a (FUN.) button to select radio function. 2 Tune in the station to be TUNE ( 3 Press one for To tune in the CD is inserted in the unit, press FUNCTION more - The number of the preset station button is the preset station is received. preset by pressing ) button. / of the preset station buttons (1 - 6) Listening than 1 seconds. The number of the pressed preset 1 station button is displayed. 2 3 4 2 and 3 to preset other stations. If the unit is in the CD ? Note As FM1, FM2 and FM3 have the same frequency range, up to 18 station can be preset for FM. When on a station is preset on the preset station button same band has already which another station of the been preset, the cally erased. previously preset station is automati- cally preset presetting for more [ FM1, FM2, FM3, displayed. is Press TUNE / ( ) repeatedly MW or LW to tune in the desired station. Press to increase and frequency. To change the frequency rapidly, longer. to decrease the press and hold down Tuning matically. ? ? ? Press SEEK (-/+) to start the seek function. (+) to search for the higher frequencies and SEEK (-) for the lower frequencies. The seeking stops when the nearest station with good reception is tuned in. Press SEEK (-/+) repeatedly until desired station is Press SEEK received. 1. Press BAND to select the desired band. 2. Press and hold AS/PS FUNCTION Press BAND to select the desired band. The band indicator Seek function is used to automati- up to 6 stations for each band. operation, press operation. the unit. The seek function is used to search for the station auto- Automatic Store Stations The automatic on to select the radio or ? and to the radio (optional) ] Preset Station displayed Press any button (except ) to turn The radio frequency is displayed. (FUN.) Repeat steps preset stations Press BAND to select the desired band and press the desired preset station buttons (1 6). (auto store/preset scan) down than 1 seconds. The scanning starts from the currently displayed frequency to higher frequencies and stops when 6 stations have been preset or the receivable frequencies have been scanned once. Note ? The presetting is not performed if there is no station to be tuned in. ? When the automatic presetting is performed, the preare automatically erased. To stop the automatic presetting, press AS/PS (auto store/preset scan) again or press any of the preset station buttons (1 6). viously preset ? stations - 9 OPERATION CD Operation Basic 1 2 Advanced Playback the front Open ( ) button. Insert a panel by pressing RELEASE disc with the labeled side up to start already inserted, press FUNCTION operation. Disc indicator lights up, and the track number and elapsed playing time are displayed. a disc is (FUN.) to select the CD Adjust the volume during playback. INT indicator lights up and the first 10 tracks on the disc are played in order. ** UP/DOWN dial. CD playback Load ? eject or a The intro scan repeat random or be performed with the REPEAT on the disc in order, the unit returns to the normal are disc. play cannot play. After the first 10 seconds of all the tracks played playback. button To with draw the CD, firmly depress The unit automatically switches to radio again. playback. Notes CONTROL by turning seconds of all the When the desired track is found, press INT The unit returns to the normal ? 3 Play Press INT playback. If Playback INTRO SCAN Play . reception. Pause play. To elapsed playing time To cancel the repeat and off. on play, resume Forward on during playback. lights up and the currently played repeatedly. RPT indicator is The track number and flash Press RPT the disc. Press and hold If the repeat play is not selected, all the tracks disc are played repeatedly. ? The repeat play cannot be random play. "" the disc. Press and hold "" down until the start of the desired passage, then release it. to the next track with a short press (for seconds). Each extra press skips forward one extra track. To skip forward rapidly, press and hold Skip during playback. lights up and the played randomly. To cancel the random currently in play with a track. To skip backward rapidly, press and hold down until the desired track number is displayed, play, ? ? The disc is either inserted or ejected when the unit is on. The playback starts from the first track on the disc only when inserting a disc. In other cases (when switching from the radio operation or turning on the unit), the playback starts from the beginning of the track being played when the playback has stopped. A disc can be inserted by putting it into the disc compartment slot, and either pushing it lightly with fingers or pressing Suitable CD:This unit is design to be operated on a 12 Cm(5") disc only. . ? 10 on the disc are again. ? play cannot be performed with the intro play. If the repeat play is selected during the random play, the random play is canceled. is pressed repeatDuring the random play, even If edly, the track currently in play is restarted. DISC SELCTION Play (OPTIONAL) When you play a disc you want, Select a disc you want pressing D- or D+ during playback or stopping (and then ( ) button.] source (Stops CD/Plays Radio) Notes not turned tracks press RDM Switching between audio ? or The random press CD PLAY/PAUSE then release it. with the intro Notes ? then release it. short press (for less than 1 seconds). Each extra press skips backward one extra the Play RDM indicator down until the desired track number is dis- Restart the track performed on Press RDM less than 1 played, again. ? RANDOM on press RPT Note again. press down until the start of the desired passage, then release it. Reverse play, selected track Press FUNCTION (FUN.) to stop CD play and switch to radio play. Press again played. to resume CD play at beginning of last track For your reference Auto Loading ? When the disc is ejected by pressing during play- back, it will be loaded automatically after 5 seconds unless you ? pull out the disc from the unit. Anti Shock Even if the unit is inflicted an external shock within 10 seconds, it will operate continuously. Specifications Radio Section Audio Section FM Max.PowerOutput.....................4x50W SpeakerImpedance.........................4Ω FrequencyRange................87.5~108.0MHz or 65-74MHz, 87.5 ~108.0MHz S/NRatio..............................55dB GENERAL Distortion................................2% StereoSeparation(1kHz)...................30dB AM (MW) FrequencyRange................522~1,620kHz PowerSupplyVoltage................12~15VDC negative ground .188x58x166mm Dimensions(WxHxD) NetWeight.............................1.34kg . . . . . . . . . . . . . S/NRatio..............................45dB Distortion................................2% ? LW (optional) FrequencyRange..................144~281kHz S/NRatio..............................45dB Distortion................................2% The design and specification without notice in the ? The working life of purchase. course this subject to change product improvement. are of product is 7 years since the date of CD Section FrequencyResponse...............40Hz~20KHz S/NRatio..............................60dB Distortion................................1% ChannelSeparation(1kHz).................50dB 11 REF NC P/NO : 3828R-F015W
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project