LG CT-20K55FE Owner's manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
the back cover and quote this information to your dealer when you require service.
Model number
:
Serial number
:
P/NO
:
3828VA0475R
on
(MC049B,
112V/124D/E TX,
486-340M)
a
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On screen language selection (option)
7
On
8
screen menus
Menu selection
Setting up
TV stations
9
Auto programme tuning
Manual programme tuning
Programme edit
Favourite programme
Calling the programme table
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
15
Sound adjustment (option)
SSM (Sound Status Memory) / Sound
Turbo sound selection (option)
Sound output selection (option)
Stereo/Dual reception (option)
NICAM reception (option)
17
adjustment
Time
setting
Setting the
Auto sleep
20
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing (option) / Games (option) / Sleep timer
21
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / 9 or 4 sub picture
24
Teletext (option)
Switch on/off / SIMPLE text
TOP text (option) / FASTEXT /
25
Special
teletext functions
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
Troubleshooting
2
check list
28
31
Installation
Power
This set
supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
operates
on an
AC mains
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
cause
of the set, this may
place anything containing liquid on top
a fire or could give an electric shock.
Service
Never
remove
the back
high voltage
properly, unplug it
very
of the set
this
expose you to
and other hazards. If the set does not operate
cover
as
can
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation
openings
on
the back
cover.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
MUTE
1
11
2
1
2
3
4
5
6
7
1.
2.
8
9
0
TV/AV
3.
12
SOUND
MENU
PICTURE
10
()
PR
5.
()
REW
PLAY
FF
P/STILL
STOP
REC
I/II/
SSM/
SLEEP
PIP
FAVOURITE
EYE/
standby
or
directly
select
MENU (or INDEX)
selects a menu.
selects an index page in the teletext mode
EYE/* (option)
switches the eye function
on or
(only
a
TIME
STILL
PR
REVEAL
() /
()
(Programme Up/Down)
16
4
accepts your selection
programmes
OK
or
displays
6.
the current mode.
? MODE
POSITION
SWAP
Q.VIEW
returns to the
previously
viewed programme.
M
9/4PIP
7.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
8.
PSM (Picture Status
recalls your preferred
9.
FAVOURITE
selects a favorite programme.
i
INPUT
Memory)
picture setting.
10. TURBO PICTURE / SOUND BUTTON
selects Turbo
picture
and sound.
11. MUTE
switches the sound
on or
off.
12. TV/AV
selects TV or AV mode.
switches the set on from
standby.
(option)
number.
TELETEXT
off.
14
9
7
4
standby.
Q.VIEW
TEXT/
PR
NUMBER BUTTONS
switches the set on from
automatically.
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
6
SIZE
off to
scans
LIST
PSM
MIX
or
selects a programme or a menu item.
switches the set on from standby.
13
15
19
standby
VOL
VOL
PR
8
from
on
OK
4.
18
POWER
switches the set
models). (option)
3
TURBO/
5
handset, please install the bat-
Location and function of controls
13. I/II/* (option)
selects the language
selects the sound
during
dual
language
broadcast.
(option)
output.
POWER
14. LIST
displays
15. SLEEP
sets the
16. SSM/*
recalls
1
the programme table.
sleep
11
timer.
17. SURROUND (º/*) (option)
selects surround sound.
2
3
4
5
6
7
8
9
MENU/INDEX
0
TV/AV
3
18. VCR BUTTONS (option)
control a LG video cassette recorder.
12
TV
4
13
I/II/
EYE/
(option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
* : No
1
2
(Sound Status Memory) (option)
your preferred sound setting.
19. PIP BUTTONS
MUTE
PR
VOL
5
()
VOL
OK
PR
()
Q.VIEW
LIST
14
6
PSM
SSM/
SLEEP
15
16
17
8
FAVOURITE
/
9
PICTURE
SOUND
TURBO/
10
function
COLOURED BUTTONS : These buttons
TELETEXT models) or programme edit.
are
used for teletext
(only
Battery installation
The remote control handset is powered by two AAA (or AA) type
batteries. To load the batteries, turn the remote control handset
over and open the battery compartment. Install two batteries as
indicated by the polarity symbols ( + and
) marked inside the com-
(Without
TELETEXT /
PIP)
-
partment.
LIST
Q.VIEW
TEXT/MIX/
or
SIZE/
HOLD/
TIME/
REVEAL/
7
UPDATE/
X
PSM
FAVOURITE
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
SSM/
PICTURE
TURBO/
(With
SLEEP/
?
M
SOUND
/
TELETEXT / Without
PIP)
5
Location and function of controls
Front
panel
Shown is a simplified representation of front or side panel.
Here shown may be somewhat different from your set.
VIDEO
VIDEO
6
(L/MONO)
1234
(R)
7
VIDEO
(L/MONO)-AUDIO-(R) !
P-TURBO-S
7
5
6
789
!
r
ON/OFF
!
MENU OK F VOL G E PR D
I
AUDIO
I
AUDIO
!
r
ON/OFF
MENU OK F VOL G E PR D
VIDEO
!
(L/MONO)-AUDIO-(R) !
S-TURBO-P
VIDEO
VIDEO
6
1234
(L/MONO)
I
AUDIO
I
AUDIO
(R)
ON/OFF
(Side panel)
r
MENU
5
OK F VOL G E PR D
1234
789
6
VIDEO AUDIO
5
!
TURBO
SOUND PICTURE
67
8
9
PRD
ON/OFF
r
MENU
F VOL
VOLG
OK
PRE
1
234
5
9
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
dims when the set is switched on.
3.
REMOTE CONTROL SENSOR
4.
MENU
selects
5.
standby
mode.
a menu.
OK
accepts your selection
displays
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
or
the current mode.
selects a programme or a menu item.
switches the set on from standby.
6.
IN SOCKETS (AV2) (option)
Connect the audio/video out sockets of external equipment to
these sockets.
7.
HEADPHONE SOCKET
Connect the headphone
8.
9.
6
AUDIO(or AUDIO-L/R)/VIDEO
(option)
plug to this socket.
TURBO SOUND/PICTURE (option)
switches Turbo sound or Turbo picture on or off.
EYE (option)
adjusts picture according to the surrounding conditions.
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
3.
fully.
Press the POWER button
The set reverts to
4.
on
the remote control handset.
mode.
standby
Press the main power button
to switch the set off.
again
POWER
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the D / E
or
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
NUMBER
buttons.
Volume
adjustment
Press the F / G button to
MENU
SOUND
adjust
OK
TURBO/
the volume.
()
PR
Quick view
VOL
Press the Q.VIEW button to view the
were
previous programme
VOL
PR
you
()
watching.
Mute function
Press the MUTE button. The sound is switched off and the
display
W
appears.
You can cancel it
I/II/
by pressing
the
MUTE,
F
/
SSM /
G, SSM/*, I/II/*,
TURBO SOUND button.
Q.VIEW
On
screen
The
menu
language
can
First select your
1.
selection
be
displayed
language.
on
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
4.
will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
on screen
displays
viewing.
7
On
screen menus
The
dialogue between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
POWER
Change
You
to
2
3
4
5
6
7
8
9
0
TV/AV
setting
of
an
item in the sub
F/GorD/E.
MUTE
1
the
can move
move
to the
higher
to the lower level
menu
MENU
TURBO
menu
with OK or F button and
press the G button.
menu
e.
play.
On
some
models, the Language will
not
display.
Auto programme
{
BG
{
System
StorageOfrom
{
I
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
AutoOprogramme
ManualOprogramme
{
OK
ProgrammeOedit
FavouriteOprogramme
VOL
()O}{OOKOMENU
()
PR
VOL
I/II
()O}{O OKOMENU
Station
PR
()
menu
Manual programme
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
Picture
{
Channel
{
Search
{
Name
{
Booster
{
{
menu
Programme
Sound
Q.VIEW
Storage
System
()O}{O OKOMENU
()O}{OOKOMENU
SSM
edit
SSM
{
O0OOCO03 OOO5OOSO69
AVL
{
O1OOCO03OOO6OOSO17
DBS
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{OOKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Special
TV programme
8
with
Note :
In the teletext mode, menus are not displayed.
a.
In some models, the Normal/Turbo search will not display,
b.
only the Start will display in the Auto programme menu.
c. In mono models, the Sound menu does not appear.
d. In some models, Tilt, Degauss, Game or Booster will not dis-
Station
SOUND
level
pull-down
or
menu
2
TV
stations
up
Setting
numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Up
to 100 TV stations
Note
:
In
be stored
can
by programme
models, up to 200 TV stations
some
Auto programme
can
tuning
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
AutoOprogramme
ManualOprogramme
be stored.
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Station
Press the G button to
display
the Auto programme
menu.
POWER
MUTE
Auto programme
System
StorageOfrom
{
BG
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
1
2
3
4
5
6
7
8
9
0
TV/AV
()O}{OOKOMENU
4.
5.
6.
7.
8.
9.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
TURBO
OK
()
PR
VOL
VOL
PR
()
select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
If the programmed station has poor quality sound, select the
b.
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
MENU
SOUND
I/II
SSM
Q.VIEW
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
MENU
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
9
Setting
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV
stations
up
Auto programme scan
To automatically scan the pictures of stored programmes, press
theD( DD ) or E( E ) button for about 3 seconds. The picture of stored
programmes appears on the screen one by one.
E
To
stop
auto programme
scanning,
Manual programme
()O}{O OKOMENU
4
7
2
5
6
9
0
TV/AV
Press the G button to
display
the Manual programme
menu.
Manual programme
3
8
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
programme.
MUTE
3.
1
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
POWER
press any button except VCR buttons.
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
MENU
SOUND
TURBO
4.
5.
OK
()
PR
VOL
VOL
PR
()
I/II
6.
7.
8.
9.
SSM
10.
11.
Q.VIEW
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number
under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
10
viewing.
TV
stations
up
Setting
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
1 to 3.
Press the D / E button to select Name.
3.
Press the G button
4.
Press the D button. You
and the
alphabet
on
the Name
can use a
5.
6.
your choice of the second
Press the OK button.
Repeatedly
viewing.
can
In
models, Booster is
If the
can
menu.
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
+, -, the numeric 0 to 9
opposite
()O}{OOKOMENU
direction.
the F / G button and then take
character, and
so on.
press the MENU button to return to normal TV
(option)
Booster
blank,
select in the
pressing
Booster
some
pull-down
AutoOprogramme
ManualOprogramme
A to Z.
With the E button you
Select the position by
7.
Station
perform
an
function.
optional
Only
a
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
set with
this function.
is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
reception
MENU
SOUND
Booster to On.
TURBO
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
4.
Press the D / E button to select On
1
Repeat
down
()
PR
VOL
or
Off
on
the Booster
OK
VOL
PR
pull-
()
menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
press the MENU button to return to normal TV
I/II
SSM
Q.VIEW
11
TV
stations
up
Setting
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
Press the MENU button and then D / E button to select the
Station menu.
2.
Press
()O}{O OKOMENU
the
G
button
and
then
D
E
/
button
to
select
Programme edit.
3.
Press the G button to
display
Programme
POWER
the
Programme edit
menu.
edit
OOOOCO01 OOO5OOSO69
MUTE
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
1
2
O4OOSO67OOO9OOCO11
3
DeleteOOOCopy
4
5
MoveOOOOOSkip
6
()}{O OKOMENU
7
8
9
Deleting
0
TV/AV
1.
2.
MENU
SOUND
TURBO
OK
PR
VOL
VOL
2.
PR
programme
programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Select
Copying
1.
()
a
a
a
Select
programme
programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
a
or
F / G button.
one
position.
()
Moving
1.
2.
3.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
I/II
4.
SSM
Press the YELLOW button
Programme
again
to release this function.
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
Q.VIEW
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
a
Select
a
programme number
programme number to be
Skipping
1.
with the D / E
skipped
or
F / G
button.
2.
3.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly
enter the programme number with the NUMBER but-
tons
select it in the programme edit
or
Repeatedly
12
or
table
menu.
press the MENU button to return to normal TV
viewing.
TV
stations
up
Setting
Station
Favourite programme
This function lets you select your favorite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
menu.
()O}{O OKOMENU
programme.
3.
Press the G button to
display the Favourite programme
menu.
Favourite programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
56n Ca 05
{
4.
Press the D / E button to select
5.
desired programme with the F / G button.
To store another programme, repeat steps 4 to 5.
6.
You
--
-----.
1
2
3
4
5
6
7
8
9
0
TV/AV
a
can
store up to 8 programmes.
7.
Press the OK button.
8.
Repeatedly
viewing.
MUTE
{
}{O0_9O()OOKOMENU
Select
POWER
press the MENU button to return to normal TV
MENU
SOUND
TURBO
OK
()
PR
Repeatedly
press the FAVOURITE button to select stored favourite
VOL
VOL
PR
programmes.
()
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
LIST
Q.VIEW
TEXT/
PR
13
TV
stations
up
Setting
the programme table
Calling
You
check the programmes stored in the memory
the programme table.
can
programme table
Press the LIST button to display the
by displaying
Displaying
POWER
MUTE
Programme
table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Station
OOOOCO01 OOO5OOSO69
1
2
O1OOCO03OOO6OOSO17
3
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
4
5
6
7
8
9
O4OOSO67OOO9OOCO11
()}{O OKOMENU
0
TV/AV
Note
MENU
SOUND
TURBO
a.
OK
PR
VOL
VOL
PR
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
()
:
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
programme with the D / E or F / G button.
Selecting
()
Select
a
a
Then press the OK button.
The set switches to the chosen programme number.
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
LIST
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Q.VIEW
Press the LIST button to return to normal TV
TEXT/
PR
14
viewing.
Picture
PSM (Picture Status
adjustment
Picture
Memory)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button to select PSM.
1.
2.
Press the G button and then D / E button to select
setting on the PSM pull-down menu.
3.
a
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
picture
()O}{OOKOMENU
Picture
PSM
{
Dynamic
Contrast
{
Standard
Brightness
{
Mild
Colour
{
Game
Sharpness
{
User
POWER
()O}OOKOMENU
Press the OK
4.
5.
Repeatedly
viewing.
You
can
or
1
2
3
4
5
6
7
8
9
0
TV/AV
F button.
press the MENU button to return to normal TV
also recall
a
desired
picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for
MUTE
good picture reproduction
at the
factory
and cannot be
MENU
SOUND
changed.
TURBO
Picture
adjustment
()
PR
VOL
You
1.
2.
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
OK
VOL
PR
()
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
Picture
PSM
Contrast
LIST
{
{
Brightness
{
Colour
{
Sharpness
{
100
EYE/
Q.VIEW
TEXT/
()O}{O OKOMENU
3.
Press the G button and then F / G button to make
adjustments on the each sub menu.
appropriate
PR
Contrast
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
POWER
MUTE
1
2
3
4
5
6
7
8
9
some
models, the
set will
Press the EYE/* button to switch the eye function
on or
off.
Off
SOUND
0
TV/AV
PICTURE
MENU
OK
TURBO/
At this time the
ously
()
but
condition
PR
VOL
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
VOL
PR
:
Turbo
SSM
PSM
SLEEP
PIP
FAVOURITE
in green does not appear continuin yellow appears each time the picture
If you press the PSM or TURBO PICTURE button with the
eye function, the eye function is automatically switched off.
Note
()
I/II
display
the display
changes.
picture
selection
(option)
LIST
EYE/
When this function is on, the
tinct than normal picture.
Q.VIEW
Repeatedly
picture
will be
more
brilliant and dis-
press the TURBO PICTURE button to switch
on or
off.
TEXT/
REVEAL
PR
(Turbo Picture off)
(Turbo Picture on)
If you press the PSM button with the Turbo picture
the Turbo picture function is automatically switched off.
Note
16
:
function,
Sound
Sound
is
adjustment
adjustment can perform
SSM
You
optional function
this function.
only
an
a
set with sound
(Sound Status Memory)
can
Speech
1.
adjustment (option)
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Sound
SSM
{
AVL
{
DBS
{
Balance
{
()O}{O OKOMENU
Press the MENU button and then D / E button to select the
Sound
menu.
2.
Press the G button to select SSM.
3.
Press the G button and then D / E button to select
ting
the SSM
on
pull-down
sound set-
a
POWER
MUTE
menu.
Sound
SSM
{
Flat
AVL
{
Music
DBS
{
Movie
Balance
{
Speech
User
{
1
2
3
4
5
6
7
8
9
0
TV/AV
()O}OOKOMENU
Sound
Frequency Adjustment
Press the G button in User to
a.
MENU
SOUND
display
the User sub
menu.
TURBO
OK
()
PR
VOL
VOL
PR
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENU
()O}{OOKOMENU
(RF STEREO, Flat)
b. Select
Make
c.
a
(AV STEREO, Flat)
sound band
appropriate
by pressing
the F / G button.
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly
()
0.1O0.5O1.5O5.0O10OkHz
press the MENU button to return to normal TV
viewing.
I/II
SSM/
PSM
SLEEP
PIP
FAVOURITE
LIST
EYE/
Q.VIEW
TEXT/
You
can
also
recall
a
desired
sound
(Flat, Music, Movie,
Speech or User) with SSM/* button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
PR
If you press the SSM/* button after making appropriate
adjustment on the User sub menu, the display User automatically
Note
:
though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
appears
even
17
Sound
Sound
SSM
{
AVL
{
DBS
{
Balance
{
adjustment (option)
Sound
adjustment
You
adjust balance,
AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
can
()O}{OOKOMENU
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL ,DBS or Balance.
Press the G button.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
1.
2.
POWER
MUTE
3.
4.
Sound
1
4
7
2
5
3
6
8
9
0
TV/AV
SSM
{
AVL
{
DBS
{
Balance
{
OOO0
}{O OKOMENU
MENU
SOUND
5.
6.
viewing.
OK
TURBO/
Press the OK button.
Repeatedly press the MENU button to return to normal TV
()
PR
VOL
VOL
PR
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
()
I/II/
SSM
PSM
SLEEP
PIP
FAVOURITE
Turbo sound selection (option)
LIST
EYE/
MEGA TURBO
Q.VIEW
(Turbo
TEXT/
Sound
off)
(Turbo
Sound
on)
Sound output selection (option)
PR
In AV
mode, you
speakers.
can
select
output sound for the left and right loud-
press the I/II/* button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
L+L
R+R
18
:
:
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
Sound
Stereo/Dual
When
adjustment (option)
reception (option)
programme is selected, the sound information for the station appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Mono sound selection
In stereo reception if the stereo
mono
signal
is
weak, you
the I/II/* button twice. In
by pressing
Display
mono
can
switch to
reception
the
of sound is improved. To switch back to stereo, press the
I/II/* button twice again.
depth
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped
high quality NICAM
Multiplex) digital sound
with the receiver for NICAM reception, the
(Near Instantaneous Companding Audio
can
be received.
Sound output can be selected according to the
broadcast as follows by pressing the I/II/* button
type of received
repeatedly.
1.
When
NICAM mono is
MONO or FM MONO.
received, you
can
2.
When
received, you
can
3.
STEREO or FM MONO. If the stereo signal
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
NICAM stereo
I/II/
is
select
NICAM
select NICAM
is weak, switch to
screen.
19
Time
Time
Setting the
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
1.
{
2.
3.
Setting
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
T ime
()O}{OOKOMENU
POWER
2
3
4
5
6
7
8
9
0
TV/AV
4.
5.
6.
Autoosleep
{
{
On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
2.
OK
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
T ime
()
PR
VOL
{
By using
MENU
TURBO
Offotime
Onotime
-i-o:o-i-
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
1.
SOUND
{
()O}{OOKOMENU
MUTE
1
Clock
VOL
PR
()
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr1
Vol
30
On
()O}{OOKOMENU
I/II
SSM
PSM
SLEEP
PIP
FAVOURITE
TEXT/
PR
LIST
EYE/
Q.VIEW
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset.
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
20
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
TV and AV modes
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
{
Game
button to select the
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV (AV1
or AV2), AV3 (option), S-VIDEO (option) or COMPONENT
(option) on the Input pull-down menu.
Special
POWER
Language
Input
{
{
TV
Childolock
{
AV1
Blueoback
{
AV2
Tilt
{
AV3
Degauss
{
{
COMPONENT
Game
()O}OOKOMENU
AV
4.
Language
Input
AV1 : VCR connected to the Euro scart socket or phone
jack of the set
AV2 : VCR connected to the AV2 sockets of the set (option)
AV3 : VCR connected to the AV3 sockets of the set (option)
S-VIDEO : S-VIDEO socket of VCR connected to the Euro scart
socket on the set (option)
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
Repeatedly press the MENU button to return to normal TV view-
2
3
4
5
6
7
8
9
0
TV/AV
TURBO
OK
()
PR
VOL
VOL
()
can
select the TV
to return to TV
mode,
MENU
SOUND
PR
or
AV mode
button.
In AV
1
or
ing.
Alternatively you
MUTE
mode, press the
by pressing
the TV/AV
D / E or NUMBER but-
tons.
Auto AV
switching (option)
I/II
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV or AV1 mode when an AV signal is input. But if
you want to keep on watching TV mode, press the D / E or NUMBER
buttons. Press the TV/AV button to return to AV modes.
SSM
Q.VIEW
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV view-
ing.
With the lock on, the display Child lock on appears on the screen if
any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the
button on the front panel is pressed while displaying the
screen
if any
menus.
21
Other functions
Special
Blue back
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
(option)
{
Game
If you select On
ground appears
Special
2.
3.
4.
5.
POWER
2
3
4
5
6
7
8
9
0
TV/AV
Note :
a. The blue background automatically appears on the screen when
there is no signal in AV mode.
b. In the Twin picture mode, PIP, Component mode, the blue background doesn't appear on the screen.
MENU
TURBO
OK
()
VOL
2.
()
picture may tilt to the left
position. This function can
3.
4.
5.
or
right
if the TV set
be used to
Press the MENU button and then D / E
Special
VOL
PR
(option)
The TV
another
1.
PR
menu.
viewing.
Tilt
SOUND
button to select the
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
MUTE
1
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
1.
()O}{O OKOMENU
on
moves
to
compensate the tilt.
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt on the
Tilt pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
I/II
SSM
Degaussing (option)
SLEEP
Q.VIEW
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
2.
3.
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down
4.
Press the OK
5.
Repeatedly
viewing.
or
menu.
F button.
press the MENU button to return to normal TV
Note : If you cannot adjust the
it again after about 4 minutes.
22
button to select the
screen
condition
by degaussing, try
Other functions
Games
Game is
function
1.
(option)
optional function, only a set with game
by using the remote control handset.
an
Press the MENU button and then D / E
Special
2.
3.
4.
Special
can
perform
this
button to select the
menu.
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
{
{
Game
()O}{O OKOMENU
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You
can
enjoy
the game
Note :
a.
Press the TV/AV
or
by using
the GAME owner's manual.
MENU button to return to the normal TV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
timer
Sleep
MENU
SOUND
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
TURBO
()
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
-
-
-
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep
time.
-
-
OK
PR
VOL
VOL
PR
()
-
I/II
SSM
SLEEP
Q.VIEW
23
PIP
operation (option)
Option
PIP is
:
an
optional function,
so
that
only
the set with PIP function
operate.
can
PIP (Picture in Picture) displays a picture within a
PIP function is not available in Component mode.
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Input
mode selection for sub
pictures.
picture
Press the INPUT button to select the
mode for the sub
pic-
Each time this button is pressed, each input mode for the sub
ture is displayed as shown below at the left upper side of sub
picpic-
input
ture.
ture.
Programme
number
COMPONENT
(option)
Swapping
AV
S-VIDEO
Note : When the main
available.
Programme
TV
(option)
pictures
the main and sub
exchange
picture is
(option)
AV 3
(option)
between main and sub
Press the SWAP button to
AV 2
AV1
or
AV
or
selection for sub
pictures.
modes, the swapping is
picture
Press the PR +/- buttons to select a programme for the sub picture.
(In some models, the sub picture programme selection is available
when the sub picture is TV mode.)
PIP
Sub
picture
size
press the SIZE button to select the desired sub
size. The sub picture appears as below.
Repeatedly
SIZE
PR
STILL
PR
POSITION
SWAP
1/16 size of the main
9/4PIP
picture
1/9 size
1/2 size
INPUT
Note
ture
:
When the sub
picture size is 1/2 of the main picture, the pic-
quality might get poor.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
9
or
4 sub
position
is
picture
Press the 9/4 PIP button
24
picture
repeatedly
to select 9
or
4 sub
pictures.
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
a
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
1
2
3
4
5
6
7
8
9
0
TV/AV
Switch on/off
Press the TEXT or TEXT/* button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT or TEXT/* button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TEXT/* button (option) or TV/AV button (option)
to switch off teletext. The previous mode reappears.
OK
()
PR
PR
()
SIMPLE text
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
lowing
page.
Programming
Press the
M
colour button in LIST mode
button to switch to LIST mode.
a
(option)
TEXT/
M
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to pro3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
25
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
1
2
3
4
5
6
7
8
9
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
0
FASTEXT
()
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
()
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
i
26
page.
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
SIZE
Selects double
text.
height
this button to enlarge the top
this button again to enlarge
Press
Press
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
1
2
3
4
5
6
7
8
9
0
UPDATE
Displays the
teletext
TV
picture on
page. The display
of the
corner
screen.
the
screen
while
waiting
for the
new
will appear at the top left hand
When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
()
PR
PR
()
HOLD
the automatic page
text page consists of 2 or
Stops
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
more
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
?
ture.
To switch the TV
Note
off press this button again.
When TV and text picture are displayed half and half
:
picture
of the screen, MIX function is not available.
TIME
When
viewing
TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button
again
a
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
D
/ E
or
to exit this function.
27
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
Y
LL
PB
PR
DVD INPUT
(480i)
COMPONENT
OUT
AV
VIDEO
(L/MONO) AUDIO (R)
IN
Aerial socket
1.
VCR
2.
3.
4.
ANT IN
LL
Y
PB
5.
PR
DVD INPUT
COMPONENT
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
(480i)
OUT
AV
VIDEO
(L/MONO) AUDIO (R)
IN
Audio/Video in/out sockets
1.
VCR
2.
3.
R
AUDIO
L/MON
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV (or AV 1), AV 2.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
VIDEO
also record programmes received
via audio/video out sockets.
can
tape
AV2
Euro scart socket
1.
2.
OK
VOL
by
the TV
on
video
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
MENU
(option)
PR
/M NO
2
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV (or AV 1) mode
automatically. But if you want to keep on watching TV mode,
press the D / E or NUMBER buttons.
VCR
Otherwise press the TV/AV button on the remote control handset to select AV (or AV 1). The VCR playback picture appears
on the screen.
You
can
also record programmes received
by
the TV
on
video
tape.
1
ANT IN
VCR
28
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
Connection of external
S-video / Audio in sockets
When
connecting
equipment
(S-AV) (option)
the S-video socket of the VCR to the S-VIDEO
socket of the set, the
picture quality
will be further
improved.
ANT IN
OUT
75Ω
VIDEO
(L)
-
AUDIO -(R)
IN
1.
Connect the S-video socket of the VCR to the S-VIDEO socket
2.
of the set.
Connect the audio cable from the VCR to the AUDIO sockets of
VCR
the set.
3.
4.
Select AV3 by pressing the TV/AV button
Press the PLAY button on the VCR.
The VCR
playback picture
appears
on
the
repeatedly.
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the VCR simultaneously, only the S-VIDEO can be received.
ANT IN
75Ω
OUT
VIDEO
AUDIO
IN
Component
1.
2.
in sockets
Connect the COMPONENT video
output sockets (Y Cb Cr, Y
Pb Pr
player
or
Y B-Y
4.
R-Y) of the
(Y PB PR) on
DVD
VCR
to the COMPONENT
INPUT sockets
the set.
Connect the audio cable from the DVD
sockets of AV
3.
(option)
to AUDIO IN
player
(or AV1).
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the DVD player.
ANT IN
Y
LL
Headphone
Only
playback picture
socket
appears
on
a
headphone
the
screen.
DVD
socket
can
COMPONENT
perform
VIDEO
(L/MONO) AUDIO (R)
IN
(option)
models which have
PR
(480i)
OUT
AV
The COMPONENT
PB
DVD INPUT
Player
this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones. To adjust the
headphone volume, press the F / G button.
If you press the MUTE
switched off.
RAUDIO
L/MON
button, the sound from the headphone's is
VIDEO
AV2
OK
VOL
PR
L/MONO
2
29
Note
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31