LG VK8820UHAY Owner's manual

OWNER S MANUAL
VK8820****
P/No.: MFL51190612
www.lg.com
New type cyclone vacuum cleaner
This information contains important instructions for the safe use and maintenance of the
vacuum cleaner. Especially, please read all of the information on page 4,5 for your safety.
Please keep this manual in an easily accessible place and refer to it anytime.
2
Table of contents
Important safety instructions ..............................................................................4~5
..............................................................................6~7
How to use .................................................................................................................8
Assembling vacuum cleaner ....................................................................................................................8
Operating vacuum cleaner.....................................................................................................................10
Using carpet and floor nozzle / all floor nozzle ....................................................................................11
Using accessory nozzles .......................................................................................................................12
Using the sani punch nozzle ...........................................................................................................13~17
Emptying dust tank ................................................................................................................................18
Cleaning dust tank .................................................................................................................................19
Cleaning air filter and motor safety filter ................................................................................................20
Cleaning exhaust filter ...........................................................................................................................21
What to do if your vacuum cleaner does not work ..............................................22
What to do when suction performance decreases ..............................................22
3
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire,electric shock, personal injury,or
damage when using the vacuum cleaner.This guide do not cover all possible conditions that may occur.Always contact your
service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC
Directives : - 2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.”
These words mean:
WARNING
This symbol will alert you to hazards or unsafe practices which could cause serious
bodily harm or death.
CAUTION
This symbol will alert you to hazards or unsafe practices which could
cause bodily injury or property damage.
WARNING
• Do not plug in if control switch is not in OFF position.
Personal injury or product damage could result.
• Keep children away and beware of obstructions when
rewinding the cord to prevent personal injury
The cord moves rapidly when rewinding.
• Disconnect electrical supply before servicing or cleaning
the unit or when cleaner is not in use.
Failure to do so could result in electrical shock or personal
injury.
• Do not use vacuum cleaner to pick up anything that is
burning or smoking such as cigarettes, or hot ashes.
Doing so could result in death, fire or electrical shock.
• Do not vacuum flammable or explosive substances such
as gasoline, benzene, thinners, propane (liquids or
gases).
The fumes from these substances can create a fire hazard or
explosion. Doing so could result in death or personal injury.
• Do not handle plug or vacuum cleaner with wet hands.
Doing so could result in death or electrical shock.
• Do not unplug by pulling on cord.
Doing so could result in product damage or electrical shock.
To unplug, grasp the plug, not the cord.
• Keep hair, loose clothing, fingers, and all parts of the
body away from openings and moving parts.
Failure to do so could result in electrical shock or personal
injury.
• Do not pull or carry by cord, use cord as a handle, close
a door on cord, or pull cord around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord
away from heated surfaces.
Failure to do so could result in electrical shock or personal
injury or fire or product damage.
• The hose contains electrical wires. Do not use it if it is
damaged, cut or punctured.
Failure to do so could result in death,or electrical shock.
• Do not allow to be used as toy. Close attention is necessary when used by or near children.
Personal injury or product damage could result.
4
• Do not use the vacuum cleaner if the power cord or plug
is damaged or faulty.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use vacuum cleaner if it has been under water.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not continue to vacuum if any parts appear missing
or damaged.
Personal injury or product damage could result. In these
cases, contact LG Electronics Service Agent to avoid hazard.
• Do not use an extension cord with this vacuum cleaner
Fire hazard or product damage could result.
• Using proper voltage.
Using improper voltage may result in damage to the motor
and possible injury to the user. Proper voltage is listed on the
bottom of vacuum cleaner.
• Turn off all controls before unplugging.
Failure to do so could result in electrical shock or personal
injury.
• Do not change the plug in any way.
Failure to do so could result in electrical shock or personal
injury or product damage. Doing so result in death. If plug
does not fit, contact a qualified electrician to install the proper
outlet.
• Repairs to electrical appliances may only be performed
by qualified service engineers.
Improper repairs may lead to serious hazards for the user.
• Do not put fingers near the gear.
Failure to do so could result in personal injury.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
• Do not put any objects into openings.
Failure to do so could result in product damage.
• Use accessory nozzles in sofa mode.
Failure to do so could result in product damage.
• Do not use with any opening blocked: keep free of dust,
lint, hair, and anything that may reduce air flow.
Failure to do so could result in product damage.
• Don ’t grasp the tank handle when you are moving the
vacuum cleaner.
The vacuum cleaner’s body may fall when separating tank
and body. Personal injury or product damage could result.
You should grasp the carrier handle when you are moving
the vacuum cleaner. (Page 10)
• Do not use vacuum cleaner without dust tank and/or filters in place.
Failure to do so could result in product damage.
• Always clean the dust bin after vacuuming carpet cleaners or fresheners, powders and fine dust.
These products clog the filters,reduce airflow and can cause
damage to the cleaner. Failure to clean the dust bin could
cause permanent damage to the cleaner.
• Do not use vacuum cleaner to pick up sharp hard
objects, small toys, pins, paper clips, etc.
They may damage the cleaner or dust bin.
• Store the vacuum cleaner indoors.
Put the vacuum cleaner away after use to prevent tripping
over it.
• The vacuum cleaner is not intended to use by young
children or infirm people without supervision.
Failure to do so could result in personal injury or product
damage.
• Only use parts produced or recommended by LG
Electronics Service Agents.
Failure to do so could result in product damage.
• Use only as described in this manual. Use only with LG
recommended or approved attachments and accessories.
Failure to do so could result in personal injury or product
damage.
• If after emptying the dust tank the indicator light is
on(red), clean the dust tank.
Failure to do so could result in product damage.
• Make sure the filters (exhaust filter and motor safety filter) are completely dry before replacing in the machine.
Failure to do so could result in product damage.
• Do not dry the filter in an oven or microwave.
Failure to do so could result in fire hazard.
• Do not dry the filter in a clothes dryer.
Failure to do so could result in fire hazard.
• Do not dry near an open flame.
Failure to do so could result in fire hazard.
• If the power cord is damaged, it must be replaced by
an approved LG Electronics Service Agent to avoid a
hazard
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance
• To avoid personal injury and to prevent the machine
from falling when cleaning stairs, always place it at the
bottom of stairs.
Failure to do so could result in personal injury or product
damage.
Thermal protector :
This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum
cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner.
Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these
conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.
If the vacuum cleaner still does not run, contact a qualified electrician.
5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7
How to use
Assembling vacuum cleaner
Hose handle
Spring latch
Telescopic pipe
(depending on model)
(depending on model)
(depending on model)
Carpet and floor nozzle(depending on model)
Telescopic pipe
Push the nozzle into the telescopic pipe.
• Push telescopic pipe firmly into hose handle.
• Grasp the spring latch to expand.
• Pull out the pipe to desired length.
•
•
•
8
Click!
Button
Fitting pipe
Flexible hose
Attachment point
Connecting the hose to the vacuum cleaner
Push the fitting pipe on the flexible hose
into the attachment point on the vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner,press the button situated on the fitting pipe,
then pull the fitting pipe out of the vacuum cleaner.
9
How to use
Operating vacuum cleaner
Indicator
Plug
Cord reel button
Control knob
How to operate
• Pull out the power cord to the desired
length and plug into the socket.
• Place the control knob of the hose
handle to the required position.
• To turn off, slide control knob to
OFF position.
• Press the cord reel button to
rewind the power cord after use.
•
Indicator and alarm sound
Park mode
Storage
• The indicator light of the hose handle • To store during vacuuming, for • When you have switched off
is on and alarm will sound when dust
example to move a small piece
and unplugged the vacuum
tank is full.
of furniture or a rug, use park
cleaner, press the cord reel
After about 1 min 30 sec, vacuum
mode to support the flexible
button to automatically
cleaner will turn itself off and alarm
hose and nozzle.
rewind the cord.
will sound.
-Slide the hook on the nozzle
• You can store your vacuum
Empty the dust tank and reuse the
into the slot on the side of
cleaner in a vertical position
vacuum cleaner
vacuum cleaner.
by sliding the hook on the
•
•
nozzle into the slot on the
underside of the vacuum
cleaner.
•
•
-
•
•
NOTE
When indicator light flashes and alarm sounds :
1. Dust tank is full
slide handle knob to OFF position and empty dust tank
2. Power is on without dust tank
slide handle knob to OFF position and reattach dust tank
3. Rotating plate in the dust tank is restricted because of obstruction
slide handle knob to OFF position and remove obstruction
10
How to use
Using carpet and floor nozzle / all floor nozzle
Carpet
Carpet
Pedal
Pedal
-
Floor
Floor
Carpet and floor nozzle (depend on model)
All floor nozzle (depend on model)
• The 2 position nozzle
This is equipped with a pedal which allows you to
alter its position according to the type of floor to be
cleaned.
• Carpet or rug position
press the pedal (
) to lower brush.
• Hard floor position (tiles, parquets floor)
Both pedal position are suitable.
•
• The 2 position nozzle
This is equipped with a pedal which allows you to alter
its position according to the type of floor to be cleaned.
• Carpet or rug position
Press the pedal (
), then brush is will rotate
• Hard floor position
Press the pedal (
), then brush will stop rotating
•
•
•
•
•
Cleaning carpet and floor nozzle
Cleaning carpet and floor nozzle
• Open the cover by pulling the hook.
• Clean the hole and brush of the nozzle.
• Clean the hole and brush of the nozzle.
11
How to use
Using accessory nozzles
Upholstery nozzle
Dusting brush
3
5
4
Upholstery nozzle
Dusting brush
Upholstery nozzle is for vacuuming
upholstery, mattresses, etc.
Dusting brush is for vacuuming picture
frames, furniture frames, books
and other irregular surfaces.
Push the button
Crevice tool
Crevice tool
Crevice tool is for vacuuming in those
normally hard-to-reach places such as
reaching cobwebs, or between the
cushions of a sofa.
Pull the cover
NOTICE
Use accessory in the sofa mode
< Upholstery nozzle mode >
<
12
>
< Dusting brush mode >
<
>
• BOX •
•
•
• Accessory nozzles include in the "PE BAG" with owner's manual.
•
How to use
Using the sani punch nozzle
Features
How to use
This nozzle picks up even dust inside through beating.
The bottom part can be separated to be cleaned.
Since the bottom does not stick to the surface, vacuuming is easy.
Follow the directions below for proper use.
Assembly
Connect the nozzle to the telescopic tube.
Sani punch nozzle(depending on model)
Set the suction power control switch to MAX POWER before vacuuming.
Depending on the type of bedding, handling may be awkward or it may
cause a lot of noise.
If this is the case, adjust the suction power control switch to a lower setting.
13
This sani punch nozzle is for effective cleaning of beds and blankets to remove mites and dust.
Effective cleaning
Bed & blanket
Bulky & heavy blanket
14
Light blanket & sheet
When using on the bed
When using on the floor
Lay out the blanket
and vacuum it on the bed
It is easier to clean a light blanket or sheet
by pushing the nozzle in the direction of the arrow.
To increase cleaning efficiency for light blankets,
lay on top of a bulky blanket and then clean.
For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool
to vacuum dust.
Carpet
Carpet
Top
Bottom
Floor
Floor
Since the vibrator inside is composed of precision parts, never disassemble the body.
Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle.
Since removal of the punch bar may cause performance problems, do not warp or remove it.
Attach the bottom plate properly before using. Without this bottom plate, it may not function.
Since this vacuum nozzle has been made exclusively for cleaning beds, blankets and
upholstery, use it only for these cleaning purposes.
(Using it to clean the floor may result soiling it or a drop in performance, do not use it
for such purposes.)
15
Follow the instruction below for through washing.
(Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction)
Bottom plate
1
2
3
Bottom plate
Punch bar
4
5
6
Punch bar
Press the button on the
rear side of the vacuum
nozzle to separate the
bottom plate.
Wipe all the soiled parts
of the vacuum nozzle
body with a cloth.
Straighten the punch bar
on the lower section.
16
Wash the removed bot-tom
plate with water and dry it.
Insert the attachment
projections on bottom
plate to the vacuum
nozzle grooves.
Push down the tabs
to secure.
Projection
Push the button 2-3 times
when the dust is filled in
the dustbin while cleaning
When the dust is fully
filled after cleaning,
take the bin and turn it
counterclockwise to
disconnect
Waste the dust in
the bin
Take the bin to fix into
the projection part and
then turn it clockwise to
connect.
17
How to use
Emptying dust tank
Indicator
Tank separation lever
Pull out
Tank handle
Dust tank cap
NOTICE,
If suction power decreases after empting dust tank,
next page
clean dust tank
Since dust tank is full,indicator continues to flash for 1 minute
and suction power will decrease for a while, then vacuum
cleaner will turn itself off.
The dust tank needs emptying when indicator light is on.
• Turn off the vacuum cleaner and unplug it.
• Grasp the handle of the tank and then press the tank separation lever.
• Pull out the dust tank.
• Empty the tank and then assemble the dust tank as below
Moving the vacuum cleaner
• Don't grasp the tank handle when you are moving the vacuum cleaner.
The vacuum cleaner's body may fall when separating tank and body.
You should grasp the carrier handle when you are moving the vacuum cleaner.
•
•
•
•
•
Assembling dust tank
Tank handle
18
Carrier handle
How to use
Cleaning dust tank
Tank separation lever
Pull out
Tank handle
• Press tank separation button and pull out dust tank.
• Raise dust tank cap
• Dry fully in shade so that moisture is entirely removed.
NOTICE
If suction power decreases after cleaning dust tank,clean air filter
and motor safety filter. Next page
•
•
•
19
How to use
Cleaning air filter and motor safety filter
Dust Seperator
Pre-filter cover
Guide cover
Air filter
Motor safety filter
If suction power is decreased after cleaning dust tank or indicator light is
on, clean air filter and motor safety filter.
Air filter and motor safety filter are located at the up of vacuum cleaner
in the above figure.
• Open the Vacuum cleaner cover by pushing the button.
• Grasp the handle of the dust seperator and take out it.
• Open the guide cover by pulling the guide cover lever and remove dust.
• Open the pre filter cover by pulling the pre filter cover lever and take out
pre filter assembly.
• Wash air filter and motor safety filter with water.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely removed.
• Air filter and motor safety filter should be cleaned in the above case.
NOTICE
If filters are damaged,do not use them.
In this cases, contact LG Electronics Service Agent.
Wash filters at least once a month.
20
•
•
•
•
•
•
•
•
How to use
Cleaning exhaust filter
Exhaust filter cover
Exhaust filter
Button
Lever
Exhaust filter cover
• The exhaust filter is a reuseable.
• To clean the exhaust filter, remove the Exhaust filter cover on the
body by pulling out it.
• Separate the exhaust filter.
• Dust off filter.(Do not wash filter with water.)
• The exhaust filter should be cleaned at least a year.
Exhaust filter cover assembling
• Fit exhaust filter cover lugs to the grooves of vacuum cleaner body.
• Join it the body.
•
•
•
•
•
•
•
21
What to do if your vacuum cleaner does not work
Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working.
What to do when suction performance decreases
• Turn off the vacuum cleaner and unplug it.
• Check the telescopic pipe, flexible hose and cleaning tool for blockages or obstructions.
• Check that the dust tank is not full. Empty if necessary.
• Check that the exhaust filter is not clogged. Clean the exhaust filter if necessary.
• Check that the air filter is not clogged. Clean the air filter if necessary.
•
•
•
•
•
22
Note
23