advertisement
▼
Scroll to page 2
of 37
P/No. MFL31177106 FRIDGE-FREEZER User's Guide Please read this User's Guide operating and keep it handy carefully before for reference at all times. P/No. MFL31177106 Table of Contents Registration Introduction Important Safety Installation Operation Suggestion Food On Instruction 4 Identification of Parts 6 Installation 7 Starting 7 Temperature Control 8 Quick Freeze 8 Vacation 9 Self Test 9 Door Alarm 9 Ice 9 Making Defrosting 9 Water 10 Dispenser Storing Food 12 General Information 13 Lamp Replacement 13 Cleaning 14 Trouble 16 storage Care and Maintenance Trouble 4 Shooting To Reverse the Doors 3 Shooting Precaution 18 How to Reverse the Doors 18 Introduction Registration The model and serial number Introduction this unit. This number is are unique found on the rear of to this unit and not available to others. You should record requested guide as a permanent purchase. Staple your receipt here. information here and retain this record of your Date of Purchase : Dealer Purchased From : Dealer Address : Dealer Phone No. : Model No. : Serial No. : Important Safety Instruction This Precaution fridge-freezer must be properly installed and located in accordance with the Installation Instruction before it is used. unplug your fridge-freezer by pulling on the power cord. Always grip plug firmly and pull straight Never out from the outlet. moving your appliance away from the wall, be careful not to roll over or damage the power When cord. After your fridge-freezer is in operation, do not touch the cold surfaces in the freezer compartment, particularly when hands are damp or wet. Skin may adhere to these 4 extremely cold surfaces. Introduction Important Safety Instruction Pull out the power Precaution plug prior to cleaning the fridge-freezer. damage, serverely bend, pull out, or twist the power because power cord damage may cause a fire or Never cord electronic shock. Never place glass products in the freezer because broken when their inner contents Do not modify It will or electric shock cause or are they may be frozen. fire. extend the Power Cord length Don't Use If an possible, connect the fridge-freezer to its own individual Extension Cord electrical outlet to prevent it and other appliances household lights from causing an overload. Accessibility of Supply Plug The supply plug or of the in easy accessible refrigerator-freezer should be placed position for quick disconnection in emergency. If the Supply Cord Replacement supply cord is manufacturer damaged, it must be its service agent or person in order to avoid a hazard. or a replaced by the similarly qualified Risk of child entrapment. Danger Before you throw away your old refrigerator or freezer: Take off the doors. Leave the shelves in place so that children may not easily climb inside. Don't store Don't store liquids gasoline or other flammable vapors vicinity of this or any other appliance. or use in the In the event of Grounding (Earthing) electric short circuit, and grounding (earthing) by providing an escape wire for the electric current. In order to prevent possible electric shock, this appliance must be grounded. Improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded. an reduces the risk of electric shock 5 Introduction Identification of Parts NOTE If you found some parts missing from your unit, may be parts only used in other models. they 6 Installation 1. Select good location. fridge-freezer a Place your 2. Avoid where it is easy to placing the unit near sunlight or moisture. direct use. heat sources, 3. There must be proper air circulation around your fridge-freezer to keep it operating efficiently. 4. To avoid If vibration, the unit required, adjust for the the The front should be screws to compensate slightly higher than the rear to aid closing. Leveling cabinet leveling floor. uneven in door must be leveled. screws can be turned easily by tipping slightly. leveling Turn the raise the unit, screws counterclockwise( clockwise( ) to lower it. 5. Clean your fridge-freezer dust accumulated during thoroughly shipping. 6. Install accessories such ice cube and the ) wipe to off all box, etc., in their packed together to prevent as places.They possible damage during shipment. are proper 7. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet. 8. To proper air circulation around the fridge please maintain sufficient space on both the well as top and maintain at least 2 inches (5 ensure freezer, sides as - cm) from the Starting rear wall. When your fridge-freezer is installed, allow it 2-3 hours to stabilize at normal operating temperature prior to filling it with fresh or frozen foods. If power plug is disconnected, allow 5 minutes before restarting. Your fridge-freezer is now ready for use. delay Operation Temperature Control Your fridge-freezer has two controls that let you regulate fridge and freezer compartments. the temperature in the Fridge ? Initially set the TEMP. CONTROL at "4". Then adjust the compartment temperature according ? to your desire. If you want an inside temperature slightly less cold or colder, turn the knob towards MIN or MAX, respectively. When the surrounding temperature is low, adjust the TEMP. CONTROL 'MIN'. Freezer ? Freezer temperature control is freezer. Initially pressing the Freezer on the top of the fridge- set the Freeze Temp at mid-point. By Temp button, you can adjust the temperature of the Freezer as indicated by the numbers of lamps lit.(the setting is composed of five steps, 5 lamps lit indicates coldest.) Quick Freeze ? When you starting the Fridge-Freezer or connecting power plug to the outlet, temperature setting is automatically set to the mid-point. ? This function is used when the you want to freeze the foods quickly. Press the 'QUICK FREEZE' button once, and then the quick operation starts with the lamp lit. The quick freeze operation freeze takes about 3 hours. When its 8 operation ends, it automatically returns to the normal state. If you want to stop the quick freeze operation, press the 'QUICK FREEZE' button once more, the lamp goes out, and the quick freeze operation stops and the refrigerator returns to the normal state. Operation This function makes the Vacation saving you fridge-freezer work in a power mode which is useful for when are on holiday, by reducing consumption as much as away energey possible. Pressing 'VACATION' starts operation lamp ON and pressing it again stops the operation. with For better functioning, you should set the TEMP. CONTROL to "MIN". This function allows you to check for operational problems. If you think you have a problem with your Self Test then press the temperature control fridge-freezer, button: - If the indicate problem - lights move up or down, fridge-freezer. then there is no with your If the indicate please lights do not move up or down, then leave the power connected and call your nearest service agent. When the door of the Door Alarm fridge is left opened for a while, the alarm sounds. Ice Making ? To make ice cubes, fill the ice tray to the water level and place it in the freezer. ? If ice cubes are required fast, press the 'QUICK FREEZE' button. ? To remove ice ends and twist Tip To remove before The and 9 at its gently. ice cubes easily, run water on the tray twisting. Defrosting Defrosting cubes, hold the tray takes place automatically. defrosting water flows down is evaporated automatically. to the evaporating tray Operation Water Dispenser (optional) Features Please assemble the VALVE ASSEMBLY after Install adjusting 10 it with a DOOR HOLE. correctly Operation Filling of 1. After turning the WATER TANK HANDLE Tank backward with the WATER TANK installed at the TANK * (SMALL) and then fill Fill water while watching DOOR, Open the CAP water a using sight glass a kettle etc. on the front of the WATER TANK. * Drinking Water up to 4.5l can 2. Press and fix the CAP 3. After 1. Press the 2. If 3. be filled. TANK(SMALL). filling spring water, proper position. Dispenser pressing supplied. If fix the HANDLE TANK at Pad with a cup. the Pad, water inside of the slowly removing a a cup from the Pad, Dispenser is water will not fall down. Caution use other beverage (milk, juice, carbonated beverage etc) than spring water. Especially beverage including grain must not be used (may result in Do not failure). 11 Suggestions on food storage Storing Food ? Do not store food which goes bad temperature, such ? as easily at low banana, and melon. Allow hot food to cool prior to storing. Placing hot fridge-freezer could spoil other food, and higher electric bills. food in the lead to ? When storing the food, use a container with a lid. This prevents moisture from evaporating, and helps food to keep ? its taste and nutrients. Do not block air vents with food. Smooth circulation of cold air ? keeps fridge-freezer temperature even. Do not open the door frequently. Opening the door warm air enter the fridge-freezer, and cause lets temperature ? To adjust food near to rise. the temperature control easily, do not store the temperature control dial. ? keep too many foods in door rack, the door from fully closing. stop ? Do not store bottles in the freezer Never as this may compartment - may break when frozen. ? Do not refreeze food that has been thawed. This causes NOTE loss of taste and nutrition. If you keep the fridge-freezer in a hot, and place, frequently open its door or put a lot vegetables in it, dew may form in it, which effect on its performance. Remove the dew with dust cloth free from 12 humid of has no care. they Care and Maintenance General Information Power Failure ? 1~2hour power failure does stores. Try to avoid opening no and harm to the foods closing the door too frequently. If You Move ? Take out foods from the fridge-freezer and firmly fix the loose items with tape. ? Turn the leveling screws until they stop before moving fridge-freezer. Otherwise the screw may scratch the floor or the fridge-freezer cannot move. the Anti Condensation ? The Anti-Condensation pipe is installed around the front Pipe side of as on fridge-freezer as well partition between the fridge compartment and freezer compartment to prevent dewing. ? Especially after installation or when ambient temperature is high, the fridge-freezer may feel hot, which is normal. quite Lamp Replacement 1. Unplug the 2. Remove 3. To power cord from the outlet. fridge remove the shelves. lamp cover, insert x type driver in the underside of the lamp cover and pull it out forwards. 4. Turn the 5. Assemble in lamp counterclockwise. reverse order of disassembly. Replacement lamp must be the same specification as original. ? You must check the which is made 13 by O-RING, rubber and prevent electric spark. Care and Maintenance Cleaning Before Be Cleaning sure to the power. unplug Clean the outside of the Exterior fridge-freezer with a soft cloth liquid detergent. If you use a wipe it with a clean wet cloth. soaked with hot water detergent, Cleaning w Warning sure to As above. Interior After be or Check that the power cord is not damaged, power plug has not overheated, and that the power plug is tightly inserted into the outlet. Be sure to dry the appliance with a cloth after washing it with water. abrasive, petroleum, benzene, thinner, hydrochloride acid, boiling water, rough brush, etc, they may damage parts of the fridge-freezer. Do not Disposal use of the old This appliance made of parts and materials which appliance contains fluid recyclable. important All the (refrigerant, lubricant) are (recycling). with the local agency. 14 and is reusable and/or materials should be sent to the collection center of waste material and after rework as For take can be reused back, please contact Care and Maintenance GRILLE and DRIP 1. After removing the TRAY finger, slowly pull 2. After clean 3. Wipe the DRIP TRAY out. discharging Drip Water inside of the DRIP TRAY, and fully rinse the GRILLE and the DRIP TRAY. moisture out around the DOOR part and the DRIP TRAY Exterior part of the GRILLE with the HOLE using a clean cloth. Wipe moisture etc out outside Dispenser Pad using a cloth. Dispenser Water Tank 1. Lift the on WATER TANK up of Dispenser by pressing the and fixing the bottom of WATER TANK and then 2.After removing on the LEVER remove the CAP TANK (BIG), clean and it. fully by rinse the inside/outside part of the WATER TANK using neutral cleansing agent. Clean and Cap Tank(Big & Small) neutral fully rinse the Cap cleansing agent. Tank (Big & Small) by using Especially for the groove part of the CAP TANK, it is convenient to cleanse it by using a small brush. Valve Clean and fully rinse the VALVE ASSEMBLY by using a operating the bottom part of the valve assembly. Always fix the Sealing Rubber separated for cleansing at the existing position (may result in water leakage). Assembly small brush. Rinse it while 15 Trouble Shooting Before calling It may save for service, This list includes common occurrences the result of defective this check this list. you both time and expense. workmanship or that are not materials in appliance. Possible Causes Problem Fridge-Freezer does not operate ? Power plug may be unplugged from the electric outlet. Plug ? it in securely. House fuse has blown or circuit breaker has tripped. Check and/or ? warm Vibration or Rattling or Crystals on or Temperature control not set on proper position. Refer to Temperature Control section. ? Appliance ? Warm ? Door left open for ? Package holding door open freezer compartment. ? The floor on which the fridge-freezer is installed may be uneven or the fridge-freezer may be unstable. Make it Ice Moisture forms on Cabinet Surface 16 is close to heat placed weather-frequent even a door by rotating the ? Door may have been left door open. ? Too ? Frost within ? This or too package openings. or air duct in screw. in the back side of the ajar long blocking leveling Unnecessary objects placed fridge-freezer. frequent source. time. long ? frozen Food lights. ? Abnormal Noise Frost fuse and reset circuit breaker. Power cut. Check house Fridge or Freezer Compartment Temperature too replace or door package holding openings. is normal. phenomenon is likely Wipe it with a dry towel. to occur in a wet space. Trouble Possible Causes Problem Moisture collects inside Fridge Shooting has odor frequent door ? Too ? In humid weather, air carries moisture into doors are opened. ? Foods with strong odors should be or too long openings. tightly fridge when covered or wrapped. Door not closing properly ? Check for ? Interior needs cleaning. Refer to CLEANING section ? Food Move package packages light does ? The floor on which the fridge-freezer is installed may be uneven or the fridge-freezer may be unstable. ? 17 keeping door open. that keep door from closing. is Fridge-freezer is not level. Adjust the leveling screws. ? not work food. ? Slightly Interior spoiled raise the front side with the leveling No power at outlet. Light lamp needs Refer to the Lamp Replacement replacing. section. screw. To Reverse the Doors Your fridge-freezer is designed with reversible doors, so that they right hand side to suit your kitchen design. may open from either the left of Precaution 1. Before reversing the door, first of all, shelves or trays which 2. Use 3. Do not 4. Be careful not to Torque lay Wrench the are Spanner or to fix fridge-freezer. or remove down. This will fridge-freezer drop you should take out food and accessories like not fixed in the the doors in the bolt. cause disassembling problems. assembling. or 4 How to Reverse the Doors 1. after removing a right part of the refrigerator room HANDLE . Remove Remove SCREWS 3 from the CAP SCREWS 2 3 the bottom part of the room HANDLE . The 4 on refrigerator freezer 1 2 room HANDLE 5 may be also sequence as in the separated in the same refrigerator room HANDLE . 12 11 2. Remove and screw remove Cover 10 and Cap Cover . And, remove , Hinge-L , and remove pin . move screw Remove the Freezer Door 26 , and 8 position of the cap . position of bracket door 14 Move the and 13 move 6 the 9 26 screw 7 . 16 3. Remove bolt and the and Fridge remove Door . the Hinge-C 15 Move the position of the cap . Move the of bracket door 22 and screw 21 position 18 21 . 22 18 4. Move the position of Hinge-U pin , Assemble the Cap, Top cover Door Assemble Fridge Hinge-C 19 and and bolt Assemble F-Door 26 Assemble the . and bolt Hinge-L Assemble Low Cover and . . screw 20 5. Install HANDLES installed at the existing freezer room, at the refrigerator room. Adjust the bottom part of HANDLES then fasten 2 removing 17 to the groove and the CAP 27 27 after screws . After SCREWS in the side of the bolting refrigerator 15 16 DOOR, press and insert the CAP Insert the CAP to hole which room . the HANDLE The freezer room assembled in the above using installed was the HANDLES 26 previous. are same manner as 10 9 existing. 7 6 5 3 6. Stop the groom where the existing HANDLE , was installed at by using the CAP 27 removed in the initial installation. Note Reversing covered the doors is not by the warranty. 19 27 2 3 1 5 6 MAX 7 6 MIN 5 1 4 3 2 TEMP. CONTROL FREEZE TEMP VACATION QUICK FREEZE QUICK FREEZE VACATION 19 20 17 27 15 16 26 10 9 7 6 5 3 27 2 3 1 19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement