LG SH5 Owner's manual
Add to My manuals4 Pages
LG SH5: Wireless sound with powerful features for an immersive audio experience. Connect to your TV via optical or HDMI (ARC) for clear, high-quality sound. Enjoy music from external devices through the portable input or USB port. Adjust the volume, select functions, or mute with the remote control or buttons on the rear of the unit.
advertisement
▼
Scroll to page 2
of
4
ENGLISH DEUTSCH FRANÇAIS NEDERLANDS SIMPLE MANUAL SLOVENŠČINA Wireless Sound Bar ITALIANO ESPAÑOL MODEL SH5 *MFL70239906* www.lg.com Copyright © 2017 LG Electronics. All Rights Reserved ΕΛΛΗΝΙΚΑ PORTUGUÊS To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. Front Panel 1 Subwoofer Connection Place the wireless subwoofer near the speaker and follow steps below. a Connect the power cord of wireless subwoofer to the outlet. b Turn on the main unit. : The buttons are located on the rear. · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Standby / On · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Selects Function · · · · · · · · · · · · · · · · · · · · · · · · · Adjusts Volume Rear Panel The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on. Subwoofer Connection Manually a Reset the Subwoofer If the green LED on the subwoofer blinks quickly, skip this step and go to b • Press and hold pairing button for 5 seconds. • The LED lights up alternately in red and green. • Plug out the power cord. After the LED turns off completely, plug in the power cord again. When the reset is completed, the subwoofer's green LED blinks quickly. OPTICAL IN · · · · · · · · · · · Connect to an Optical device PORTABLE IN · · · · · · · · · Connect to a Portable device USB port · · · · · · · · · · · · · · · · · Connect to a USB device HDMI IN · · · · · · · · · · Connect to HDMI out on a device HDMI OUT (TV ARC) · · · · · · · · · · · · · · Connect to a TV b Reset the sound bar • Adjust volume to minimum. "MIN" appears on display window. • Press and hold (Mute) button on the remote control for 3 seconds. "SUB - WF RESET" appears on display window. • Turn the sound bar’s power off and on while the subwoofer’s green LED blinks. When the connection is completed, you can see the green LED on the subwoofer. Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1m to prevent wireless interference. >1m 2 TV Connection Remote control Connect with the Sound Bar and TV using Optical ( ) or HDMI ARC ( ). Optical Connection a Connect the sound bar to the TV using Optical cable. b Set up [External Speaker (Optical)] on your TV setting menu. 8: Turns down the volume at night. TV AV SYNC: Synchronizes the audio and video. AUTO VOL: Adjusts the volume level appropriately. AUTO POWER: Automatically turns on by an input source. Replacement of battery HDMI(ARC) Connection a Connect the sound bar to the TV using HDMI cable. b Set up [External Speaker (HDMI ARC)] on your TV setting menu. TV HDMI connection is unavailable if your TV does not support HDMI ARC. Additional Device Connection a Connect to the external device as follows. (Set-top Box, Player etc.) TV OR OR b Set the input source by pressing F on the remote control or unit repeatedly. Additional Information Specification Power consumption AC adapter Dimensions (W x H x D) Net Weight Bus Power Supply (USB) Amplifier (Total RMS Output power) Declaration of Conformity Refer to the main label. Networked standby : 0.5 W (If all network ports are activated.) yy Model : DA-38A25 yy Manufacturer : Asian Power Devices Inc. yy Input : 100 - 240 V ~ 50 - 60 Hz 1.2 A yy Output : 25 V 0 1.52 A Approx. 945 mm x 53 mm x 85 mm Without foot Approx. 2.6 kg 5 V 0 500 mA 320 W RMS Design and specifications are subject to change without notice. How to disconnect the wireless network connection or the wireless device Set up the AUTO POWER ON/OFF function to off and turn off the unit. Hereby, LG Electronics declares that the radio equipment type Wireless Sound Bar is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc# For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. Frequency range 2402 to 2480 MHz 5730 to 5821 MHz Output power (Max.) 10 dBm 13 dBm Wireless function S/W version: 1.0
advertisement
Key Features
- 2.1 channels 320 W DTS Digital Surround, Dolby Digital
- Soundbar speaker RMS power: 120 W
- Wireless Active subwoofer Subwoofer RMS power: 200 W
- Silver
- Wired & Wireless Bluetooth 4.0
Related manuals
advertisement