LG XB14 User guide
Add to my manuals
18 Pages
The LG XB14 is a versatile DVD MICRO Hi-Fi SYSTEM that lets you enjoy your favorite movies, music, and radio broadcasts with exceptional sound quality. With its multiple connectivity options, you can easily connect it to your TV, portable music players, and USB devices to access a wide range of media content.
advertisement
▼
Scroll to page 2
of 18
ENGLISH DEUTSCH FRANÇAIS User Guide XB14 (XB14-D0U, XBS14V) NEDERLANDS SLOVENŠČINA ITALIANO ESPAÑOL As an ENERGY STAR Partner, LG has determined that this product or product models meet the ENERGY STAR guidelines for energy efficiency. ® ΕΛΛHΝΙΚA ® ENERGY STAR is a U.S. registered mark. ® P/NO: MFL62886101 PORTUGUÊS Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING : Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. CAUTION : This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. 2 CAUTION : The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION : concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit ; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized serv ice center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. “This device is equipped with a portable battery or accumulator. Safe way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators.” Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. This product is manufactured to comply with EMC Directive 2004/108/ EC and Low Voltage Directive 2006/95/EC. European representative: LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-036-547-8940) Welcome to your New DVD MICRO Hi-Fi SYSTEM Contents Setting up Main unit Remote control OSD initial language settings - Optional Initial settings of the Area Code Adjusting the general settings Displaying Disc information Playing a Disc or file Using an USB device Listening to music from your portable player Recording to USB Listening to the radio Language Codes Area Codes Troubleshooting Types of Playable Discs Specifications 4 5 6 7 7 8-9 9 10-11 12 12 13 14 15 15 16 17 18 3 Setting up FM wire antenna 2 Connect the wires to the unit. Match each wire’s coloured band to the same coloured connection terminal on the reverse of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad. 1 Video Out connection 4 Connect the VIDEO OUTPUT(MONITOR) jack on the unit to the corresponding input jack on your TV using a Video cable. 2 1 3 Notes • If TV screen becomes discolored do not place front speakers within 30cm from TV. • Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base. 3 Fit the AM loop aerial to its stand (Optional) Connect the AM loop aerial to the unit. Then unfold and install the aerial as below. 5 5 Plug the unit plug into a wall socket. 4 4 Stretch the FM aerial. The reception will be at its best when the end of the aerial is stretched to be in a straight line and horizontal. Main unit Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. 1/] Power on/ off FUNCTION Change the functions between DVD/CD, USB, PORTABLE, FM, AM (OPTIONAL). VOLUME Control the volume when using any function PROGRAM/MEMORY • On the CD/USB mode, you can make your own playlist. • On FM/AM mode, you can save radio stations. OPEN You can use it when inserting or removing CDs. DISPLAY WINDOW. EQ.: Sound quality adjustment You can choose sound impressions. x Stop BX Play/Pause m/M Searches backward or forward Skips to the previous/next track TUN. (-)/ (+) Selects the radio station PRE. (-)/ (+) Selects preset numbers REC. Recording to USB PORT.IN USB Connector The player can be used to play the music from many types of portable player. 5 Remote control FUNCTION : Selects the function and input source. SLEEP : You can select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. 1 POWER : Switches the unit ON or OFF. * : The button is not available. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear. DISPLAY : Accesses On-Screen Display. MENU : Accesses the menu on a DVD disc. SETUP : Accesses or removes setup menu. REPEAT/RANDOM : To select a play mode. (Random/ Repeat) MUTE: Temporarily stop the sound. EQ(Equalizer effect) : You can choose sound impressions. CLEAR : Removes a track number on the program List. VOL : Adjusts spaker volume. TV Control buttons : Controls the TV. (LG TV only) Controlling the TV. You can control the sound level, input source, and power switching of LG TVs as well. Hold POWER (TV) and press PR/CH(+/–) button repeatedly until the TV turns on or off. RDS/PTY(Optional): Radio Data System Searches radio stations by radio type. 6 PRESET (U u) : Selects programme of Radio. TUN. (-/+) : Tunes in the desired radio station. I i U u (left/ right/ up/ down): Navigates on-screen displays. ENTER : Acknowledges menu selection. RETURN (O) : Moves backwards in the menu or exited the setup menu. REC(z) : Recording to USB STOP (x) : Stops playback or recording. PLAY (B): Starts playback. MO./ST. : Improves radio signal reception. PAUSE/STEP (X) : Pauses playback. SKIP (./ >) : Goes to next or previous chapter/ track/ file. SCAN (bb/BB) : Searches backward or forward. 0-9 numerical buttons : Selects numbered options in a menu. SUBTITLE : During playback, you can select a desired subtitle language . PROG./MEMO. : Saves radio stations in FM/AM mode. Creates your own playlist for playback Put the batteries into the remote control. Make sure that the + (plus) and - (minus) on the batteries match those on the remote control. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. OSD initial language settings - Optional During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. ON REMOTE 1 Turn the power on: The language list appears. 1 POWER When you use this unit for the first time, you have to set the Area Code as shown below. Refer to page 15 for code list. ON REMOTE 1 Display setup menu: 2 Select LOCK menu on the first level: 2 Select the language: IiUu 3 Press: ENTER 4 To confirm press: Initial settings of the Area Code Ii ENTER 3 Move to second level: The activated Area Code appears on the second level. SETUP Uu i 4 Move to the third level: i 5 Enter a new password: Numeric (0-9) and ENTER 6 Recheck the entered new password: 7 Select a code for a geographic area: After select, Rating and Password will be activated. IiUu 8 To confirm what you press : Make sure to finish setting the Area Code. ENTER 7 Display Mode – If you selected 4:3, you’ll need to define how you would like wide screen programs and films to be displayed on your TV screen. Adjusting the general settings [Letterbox] ON REMOTE 1 Display setup menu: 2 Select a desired option on the first level: 3 Move to the second level: 4 Select a desired option on the second level: 5 Move to the third level: 6 Change the setting: SETUP Uu i Uu i U u, ENTER Adjusting the general settings - more you can do [Panscan] This displays a wide screen picture with black bands at the top and bottom of the screen. This fills the entire 4:3 screen, cropping the picture as necessary. Adjusting the audio settings DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal – Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. Adjusting the lock settings To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Adjusting the language settings 1 Enter a 4-digit password then press ENTER. 2 Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. OSD (Menu Language) – Select a language for the Setup menu and on-screen display. Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Disc Audio/ Disc Subtitle/ Disc Menu – Select a language for the Disc Audio/ Disc Subtitle/ Disc Menu. [Original] [Other] [Off] (for Disc Subtitle) Refers to the original language in which the disc was recorded. To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (Page 15). If you make a mistake before pressing ENTER, press CLEAR. Turn off Subtitle. Adjusting the display settings TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3] [16:9] 8 Select when a standard 4:3 TV is connected. Select when a 16:9 wide TV is connected. Password – Sets or changes the password for lock settings. [New] [Change] Enter a new 4-digit password using the numerical buttons then press ENTER. Enter the password again to confirm. Enter the new password twice after entering the current password. If you forget your password you can reset it. 1 Remove the disc in the unit. 2 Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER. The password has now been cleared. Area Code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 15. Adjusting the others settings DivX(R) Registration – We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. Press ENTER and you can view the registration code of the unit. Displaying Disc information ON REMOTE 1 Press: DISPLAY Sytem select - OPTIONAL 2 Select an item: Uu You must select the approate system mode for your TV system. If “NO DISC” appears in the display window, press and hold PAUSE/STEP (X) for more than five seconds to be able to select a system. (NTSC/ AUTO/ PAL) 3 Adjust the display menu settings: Ii Enjoying a pre-programmed sound field The system has a number of pre-set surround sound fields. You can select a desired sound mode by using EQ. The displayed items for the Equalizer may be different depending on sound sources and effects. AUTO EQ Realizes the sound equalizer that is the most similar to the genre of which is included in the MP3 ID3 tag of song files. ROCK POP CLASSIC This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock, pop, or classic concert. XDSS ON Reinforce the treble, bass and surround sound effect. NORMAL You can enjoy the sound without equalizer effect. The screen saver appears when you leave the unit in Stop mode for about five minutes. 4 To return the exit: O RETURN Displaying Disc Information - more you can do You can select an item by pressing U u and change or select the setting by pressing I i. Current title (or track/ file) number/ total number of titles (or tracks/ files) Current chapter number/ total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/ total number of angles Selected sound mode Symbol Used in this Manual All discs and file listed below DVD and finalized DVD±R/RW DivX files JPEG files ALL DVD DivX MP3 files WMA files Audio CDs MP3 WMA ACD JPG 9 Frame-by-Frame playback Playing a Disc or file DVD DivX Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame. ON REMOTE - 1 Insert a disc on unit: 2 Select DVD/CD: FUNCTION UuIi 3 Adjust the menu settings: / Select a file from the menu: Playing repeatedly or randomly MP3 DVD WMA DivX ACD Press REPEAT/RANDOM repeatedly, and the current title, chapter or track will be played back repeatedly or randomly. To return to normal playback, press REPEAT/RANDOM repeatedly. - Random play mode: only music files. - Random play mode : only music files. Fast forward or fast reverse 4 Start the disc playing: B PLAY or ENTER 5 To stop the disc playing: x STOP Notes: MP3 DVD WMA DivX ACD Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed. 1.5 times faster playback DVD Put a disc on the disc tray with the disc hole on it matched and press it until you hear a click. If not, the disc cannot be read. Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5 times faster than normal playback speed. “B x1.5” will appear in the screen. Press B PLAY again to return to normal playback speed. Playing a Disc or file - more you can do Slowing down the playing speed Playing a DVD that has a menu DVD Most DVDs now have menus which load first before the film begins to play. 1 You can navigate these menus using U u I i to highlight an option. 2 Press ENTER to select. Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and JPEG files together, you can select menu of files which you would like to play by pressing MENU. Skipping to the next/ previous chapter/ track/ file MP3 DVD WMA DivX ACD Press SKIP (>) to move to the next chapter/ track/ file. Press SKIP (.) to return to the beginning of the current chapter/ track/ file. Press SKIP (.) twice briefly to step back to the previous chapter/ track/ file. Pausing playback ALL 1 Press PAUSE/STEP (X) to pause playback. 2 Press PLAY (B) to continue playback. 10 DVD 1 While playback is paused, press m/M on the remote control. 2 You can change the various playback speed by pressing m/M repeatedly. 3 Press Brto continue play at normal speed. Selecting a subtitle language DVD DivX During playback, press SUBTITLE repeatedly to select a desired subtitle language. Changing the character set to display DivX® subtitle correctly - Optional DivX 1 If the subtitle does not display properly during playback, press and hold SUBTITLE for about 3 seconds to display the language code menu. 2 Press SUBTITLE repeatedly to change the language code until the subtitle is displayed properly. Viewing the Title menu DVD Press TITLE to display the disc's title menu, if available. Starting play from selected time DVD DivX Searches for the starting point of entered time code. 1 Press DISPLAY then select clock icon. 2 Enter a time then press ENTER. For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter “11020” by using numerical buttons and press ENTER. if you enter the wrong number, press CLEAR to enter again. Last Scene Memory DVD This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off (Stand-by mode) the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. Creating your own program MP3 WMA ACD You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. The program is cleared when the disc is removed. “ and then press 1 Select a desired music then press PROG./MEMO. or select “ ENTER to add the music to the program list. 2 To add all music in the disc, select “ ” and then press ENTER. 3 Select a music from the program list then press ENTER to start programmed playback. 4 To clear a music from the program list, select the music you want to clear then press CLEAR or select “ ” icon and then press ENTER. To clear all music from the program list, select " " then press ENTER. Displaying file information MP3 You can check the ID3 Tag information of MP3 files only in discs by pressing DISPLAY repeatedly. Viewing photo files as a slide show JPG Playable file requirement DivX • Available resolution: within 800x600 (W x H) pixels • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as “ _ “ mark on the display. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted. • Playable DivX file : “.avi”, “.mpg”, “.mpeg”, “.divx” • Playable Subtitle format : SubRip (*.srt/ *.txt), SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt), MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/ *.txt). • Playable Codec format : “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP4V3”, “3IVX”. • Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”. • For discs formatted in Live file system, you cannot play it on the player. • If the name of movie file is different from that of the subtitle file, during playback of a DivX file, subtitle may not be displayed. MP3/ WMA • Sampling frequency : within 32 - 48 kHz (MP3/ WMA) • Bit rate : within 32 - 320 kbps (MP3), 40 - 192 kbps (WMA) • File extensions : “.mp3”/ “.wma” • CD-ROM file format : ISO 9660 LEVEL 1 / JOLIET • We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. JPG • • • • Normal: 5120 x 3840, Progressive jpeg: 2043 x 1536 Recording condition: ISO9660 LEVEL 1/ JOLIET Maximum files : Under 999. Some discs may not operate due to a different recording format or the condition of disc. • File extensions: “.jpg” 1 Use U u I i to highlight ( ) icon then press ENTER to start slide Show. 2 You can change slide show speed using I i when ( ) icon is highlighted. Skipping to the next/ previous photo JPG Press SKIP (. or >) or I i to view the previous/ next photo. Rotating a photo JPG Use U u to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. 11 Using an USB device You can enjoy media files saved on an USB device by connecting it to the USB port of the unit. If you want to operate other function, see the DISC playback section. ON REMOTE 1 Connect the USB device to the USB port of the unit. 2 Select the function: 3 Select a file you want to play: 4 Start your media playing: FUNCTION Uu Listening to music from your portable player ON REMOTE 1. Connect the portable player to the PORTABLE IN connector of the unit. PORT IN. B PLAY or ENTER 5 To stop, press: 6 Before disconnecting, you have to change to any other function: x STOP FUNCTION Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that supports USB 2.0 or USB 1.1. • The USB function of this unit does not support all USB devices. USB device requirement • Devices which require additional program installation when you have connected it to a computer, are not supported. Look out for the following. • Do not extract the USB device while in operation. • For a large capacity USB, it may take longer than a few minute to be searched. • To prevent data loss, back up all data. • If you use a USB extension cable or USB hub, the USB device is not recognized. • Using NTFS file system is not supported. (Only FAT(16/32) file system is supported.) • This unit is not supported when the total number of files is 1000 or more. • External HDD, Card readers, Locked devices, or hard type USB devices are not supported. • USB port of the unit cannot be connected to PC. • The unit can not be used as a storage device. 12 2. Turn the power on. 3 Select the PORTABEL function. 4 Turn on the portable player and start it playing POWER FUNCTION - When you are recording, look out for the following Recording to USB ON REMOTE 1 Connect the USB device to the USB port of the unit. 2 Select a mode in which you want to record: (ex. CD/ TUNER/ ...) Play a sound source first If you want to record desired music file in disc to USB, play a file before starting the recording. FUNCTION 3 Start the recording: z REC 4 To stop, press: x STOP Recording to USB - more you can do Recording Music file in disc source to USB One track recording If the USB recording is started during playback of the CD, the one track/ file would be recording into the USB. All tracks recording If the z REC is pressed at the CD stop, all tracks/ files would be recording. The files in the sub-folders are not recorded during all track recording. Program list recording USB records after creating your own program if you want to record the track you want (AUDIO CD Only). • You can check the recording percentage rate for the USB record on the screen during the recording. • During recording MP3/ WMA, there is no sound. • When you stop recording, the file that has been recorded at that time will be stored. (AUDIO CD Only) • Do not remove the USB device during USB recording. If not, an incomplete file may be made and not deleted on PC. • If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL” or “NO REC” is displayed on the display window. • Multi card reader device or External HDD can not be used for USB recording. • A file is recorded by 2 hours (about 128 Mbytes) when you record for a long term. • In the state CD-G disc, USB record is not operated. • You may not record more than 999 files. • The file number is saved automatically. • It’ll be stored as follows. AUDIO CD CD_REC TRK-001 TRK-002 - MP3/ WMA FILE_REC 001_ABC(File name) 002_DEF(File name) - The other sources. EXT_REC AUD-001 AUD-002 - The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Be responsible Respect copyrights 13 Seeing the information about your radio stations - OPTIONAL Listening to the radio Make sure both for the FM and AM(Optional) aerials to be stretched to the most. ON UNIT ON REMOTE FUNCTION FUNCTION m/M TUN. - / + 3 To save a radio station: A preset number will show in the display. PROGRAM/ MEMORY PROG./MEMO. 4 Select the preset number: Up to 50 radio stations can be saved. PRE. (-) / (+) PRESET U / u 5 To confirm press: PROGRAM/ MEMORY PROG./MEMO. 1 Select FM or AM(Optional): 2 Select a radio station: Listening to the radio - more you can do Looking for radio stations automatically Press and hold TUN.-/ TUN.+ for more than a second. The tuner will scan automatically and stop when it finds a radio station. Deleting all the saved stations 1 Press and hold PROG./MEMO. for two seconds. - “ERASE ALL” will flash up on the display. 2 Press PROG./MEMO.. Improving poor FM reception Press B MO./ST. on the remote control. This will change the tuner from stereo to mono and usually improve the reception. 14 The FM tuner is supplied with the Radio Data System (RDS) facility. This shows the letters RDS on the display, plus information about the radio station being listened to. Press RDS on the remote control several times to view the information. PTY - Program Type, such as News, Sport, Jazz. RT - Radio Text, the name of the radio station. CT - Time Control, the time at the location of the radio station. PS - Program Service name, the name of channel. You can search the radio stations by program type by pressing RDS. The display will show the last PTY in use. Press PTY one or more times to select your preferred program type. Press and hold I/i on the remote control. The tuner will search automatically. When a station is found the search will stop. Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 7678 7684 7775 7771 7783 7776 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 6983 8385 8387 8386 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8471 8465 8469 8472 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose an area code from this list. Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW 15 Troubleshooting PROBLEM CAUSE CORRECTION No Power The power cord is disconnected. Plug the power cord into the wall outlet securely. No Picture The TV is not set to receive the DVD signal. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. The video cables are not connected securely. Connect the video cables securely to both the TV and unit. A DVD/CD will not play. No disc is inserted. Insert a disc. An unplayable disc is inserted. Insert a playable disc (check the disc type, colour system and regional code). The disc is inserted upside down. Place the disc the side you can see the printed side. The setup menu is open on screen. Press SETUP to close the menu screen. There is a parental lock which prevents the playback of Enter your password or change the rating level. DVDs with a certain rating. Humming noise heard while a DVD or CD is playing. The disc is dirty. Clean the disc using a soft cloth with outward strokes. The unit is located too close to the TV, causing feedback. Move the unit and audio components further away from your TV. Radio stations can’t be tuned in properly. The antenna is positioned poorly. Attach an external aerial if necessary. The signal strength of the radio station is too weak. Tune to the station manually. No stations have been preset or preset stations have been cleared (when tuning by scanning preset channels). Preset some radio stations. The remote is not pointed directly at the unit. Point the remote directly at the unit. The remote control doesn’t work well / at all 16 The remote is too far from the unit. Use the remote within 23 feet (7m) of the unit. There is an obstacle in the path between the remote control and the unit. Remove the obstacle. The batteries in the remote control is flat. Replace the batteries with new one. About the “ Types of Playable Discs Type ” Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc. LOGO DVD-VIDEO : Discs such as movies that can be purchased or rented. DVD-R : Video mode and finalized only DVD-RW : Video mode and finalized only DVD VR format that have been finalized can not be played in this unit. DVD+R : Video mode only Supports the double layer disc also DVD+RW : Video mode only Audio CD : Music CDs or CD-R/ CD-RW in music CD format that can be purchased. This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles, DivX, MP3, WMA and JPEG files. Some DVD±RW/ DVD±R or CDRW/ CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Regional Codes This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”. • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play. • If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/ Live File System : Disc format system for Windows Vista) 17 Specifications General Power supply 200-240V ~ 50/60Hz. Power consumption Net Weight External dimensions (WxHxD) Operating temperature Operating humity Output power T.H.D Tuner FM Tuning Range AM Tuning Range(Optional) DVD/CD Frequency response Signal-to-noise ratio Dynamic range 20W 1.68 kg 150 x 205 x 212 mm 5 °C - 35 °C 5% - 85% 5W+5W 0.5 % 87.5 - 108.0 MHz or 87.50 - 108.00 MHz 522-1620kHz or 520-1710kHz 100 Hz - 18 kHz 60 dB 55 dB Speaker (XBS14V) Type Impedance Rated Input Power Max. Input Power Net Dimensions (WxHxD) Net Weight (1EA) 1 Way 1 Speaker 6Ω 5W 10 W 130 x 205 x 156 mm 0.9 kg Designs and specifications are subject to change without prior notice. 18
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Home audio micro system 10 W Black, Silver
- Optical disc player
- Built-in speaker(s) 4 Ω
- Microphone in DC-in jack
- MP3 playback
- Equalizer
Related manuals
advertisement