advertisement
▼
Scroll to page 2
of 59
RH1757P1_NA4ULL_ENG HDD/DVD RECORDER OWNER'S MANUAL MODEL: RH177 Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely. CAUTION CAUTION and has CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER BACK) (OR NO USER-SERVICEABLE PARTS INSIDE flash with arrowhead lightning equilateral triangle to the presence of uninsulated within the sufficient symbol within is intended to alert the user dangerous voltage product's enclosure that may magnitude to constitute a risk be of of electric shock to persons. The exclamation triangle within an is intended to alert the the equilateral user to the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings ensure branch circuits. Check the outlets, loose damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. physical or mechanical abuse, being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. such as To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. POWER: This HDD/DVD Recorder operates on a mains supply of 200-240V~,50/60Hz. WIRING: This DVD & HDD Recorder is CAUTION: and to or page of this owner's manual to be certain. Protect the power cord from point presence of important operating and maintenance (servicing) instructions in the literature accompanying additional outlets no specification or . an Power Cord Do not overload wall outlets. Overloaded wall REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This concerning the appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance Most in the cabinet reliable operation are of the provided for ventilation product and to protect it from over heating. openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or The the manufacturer's instruction have been adhered to. supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below: WARNING: A mains plug removed from the mains lead of this DVD & HDD Recorder must be destroyed. A mains plug with bared wires is hazardous if inserted in to the earth pin, a mains socket. Do not connect either wire marked with the letter E or with the earth symbol coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distribution board. or IMPORTANT: The wires in this mains lead accordance with the - BLUE: NEUTRAL, following are coloured in codes: BROWN: LIVE - As the colours of the wires in the mains lead of this DVD & HDD Recorder may not correspond with the coloured marking identifying the terminals in your plug, proceed CAUTION: as follows: The wire which is coloured blue must be CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected WHEN OPEN AND INTERLOCKS DEFEATED DO NOT to the terminal which is marked with the letter L STARE INTO THE or coloured red. BEAM OR VIEW DIRECTLY WITH Disposal OPTICAL INSTRUMENTS. of your old appliance 1. When this crossed-out wheeled bin CAUTION: This To product employs a Laser System. proper use of this product, please read this owner's manual carefully and retain it for future reference. ensure Should the unit require maintenance, contact an 2. authorized service center. Performing controls, adjustments, or carrying out procedures specified herein may result in hazardous other than those radiation exposure. prevent direct exposure to laser To (dripping not try to open as 2 vases, apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. or 3. a for the environment and human health. beam, do the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The symbol is product it means the product is covered by the European Directive 2002/96/EC. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal of your old appliance will help prevent potential negative consequences attached to 4. For detailed information about disposal appliance, please contact your city office, waste disposal service or the shop where you purchased the product. more of your old This product is manufactured to comply with requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and the radio interference 73/23/EEC. Contents Introduction.............................4-9 SymbolUsedinthisManual................4 NotesonDiscs..........................4 .5 RecordableandPlayableDiscs PlayableDiscs..........................6 RegionalCode..........................6 .6 Availability of copying or moving feature . . Abouttheinternalharddiskdrive . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Recording............................34-41 AboutDVDrecording....................34 AboutHDDrecording....................34 Timeshift..............................35 BasicRecordingfromaTV................36 InstantTimerRecording..................36 TimerRecording........................37 Timer Recording with VIDEO Plus+ System .38 .39 Checking Timer Recording Details .39 RecordingfromanExternalInput RecordingfromDVInput.................40 Simultaneous recording and playback .41 .41 Playback another title during recording TimeSlip...........................41 . FrontPanel.............................8 RemoteControl.........................9 RemoteControlOperation.................9 HookupandSettings...................10-22 RearPanel............................10 ConnectingtotheAerial..................10 ConnectionstoYourTV..................11 ConnectingtoanAmplifier................12 Accessory Audio/Video (A/V) Connections .13-14 UsingtheHomeMenu...................15 InitialSettings..........................15 GeneralOperation....................15 GeneralSettings.....................15-18 AutoProgramming...................15 ProgramEdit........................16 . AutoClockSet/ManualClockSet . . . . . . .17 TVAspect/DisplayMode..............17 ProgressiveScan....................17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Editing...............................42-49 Title List and Chapter List Menu Overview .42 .43 HDD, VR Mode: Original and Playlist Editing AddingChapterMarkers.................43 ChangingTitleThumbnails................43 MakingaNewPlaylist....................44 Adding Additional Title/Chapters to the Playlist .44 .45 Deleting an Original or Playlist Title/Chapter DeletingaPart.........................45 NamingaTitle.........................46 . . . . . . . TimeSearch..........................46 Sort.................................47 Undoing/Redoing the Last Deletion CombiningTwoTitlesIntoOne . . . . . . . . . . . . . . . . . . . . . .47 .47 .17 DivideOneTitlesIntoTwo................48 Initialization.........................18 .48 CombiningTwoChaptersIntoOne MovingaPlaylistChapter.................49 HideaChapter/Title.....................49 AV2 Connection / Power Save Mode . . . . . LanguageSettings......................18 AudioSettings.........................18 .18 DolbyDigital/DTS/MPEG. SamplingFrequency..................18 .18 DRC(DynamicRangeControl). . . . . . . . . . . . . . . . . . . Vocal..............................18 .19 Lock(ParentalControl)Settings .19 Rating/SetPassword/AreaCode DivXRegistrationCode...............19 RecordingSettings......................20 .20 RecordModeSet/RecordAspect. DV Recording Audio / TV Recording Audio .20 .20 AutoChapter/AV2Recording. DiscSettings........................20-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DiscFormat........................20 Finalize/DiscLabel..................21 DiscProtect/PBC...................21 General Explanation of On-Screen Display . . . .22 Playback.............................23-33 .23-26 GeneralPlaybackFeatures PlayingaDivXMovieFile.................27 .28 PlayinganAudioCDorMP3/WMAfile with Audio CD and Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . ProtectaTitle..........................49 Dubbing..............................50-52 BeforeDubbing.........................50 DubbingfromHDDtoDVD...............51 DubbingfromDVDtoHDD................51 .52 OneTouchCopy(HDDtoDVD). .52 OneTouchCopy(DVDtoHDD). . . . . . . . . . . . . . . . . . . . . Reference............................53-58 AdditionalInformation....................53 OverwritingRecording.................53 Viewing Title List menu displayed on other DVDRecordersorPlayers.............53 Playing Your Recordings on Other DVD .53 Players(FinalizingaDisc). LanguageCodes.......................54 . . . . . . . . . . . . AreaCodes...........................54 Controlling Your TV with the Supplied RemoteControl........................55 Troubleshooting......................56-57 Specifications..........................58 MP3/WMAfile..........................29 ViewingaJPEGFile..................30-31 .32-33 Editing a MP3/WMA, JPEG, DivX file . . . . . 3 Introduction Notes on To ensure proper use of this product, please read this owner's manual carefully and retain for future Handling Discs Do not touch the the reference. disc on by the Discs playback side of the disc. Hold edges so that fingerprints do not get the surface. Never stick paper This manual information provides on the or tape on the disc. operation and maintenance of your recorder. Should the unit require service, contact an authorized service location. About the " Symbol Display " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available on that specific media. Used in this Manual Symbol Note: Indicates Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. special notes and operating features. Tip: Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. Indicates tips and hints for A section whose title has applicable only symbol. are HDD -RW Video following symbols represented by the the HDD recording DVD-RW with Video DVD+RW disc -R DVD-R disc +R DVD+R DVD on of the All DVD discs listed below. DVD-RW with VR -RW VR +RW one to the disc Titles recorded DVD ALL the task easier. making (DL) disc mode recording mode Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older records. DVD-Video disc VCD Video CDs ACD Audio CDs DivX DivX files MP3 MP3 files Moisture Condensation Never operate this product immediately after moving it from a WMA WMA files Leave it for two JPEG JPEG files If you use damage 4 vinyl this cold location to or a warm three hours without product in such discs and internal a parts. location. operating situation, it may it. Recordable and DVD-RW on the Video Disc (Digital DVD-RW discs These Discs Discs Playable ReWritable): - be formatted for VR mode can be recorded can on recording repeatedly. Recordings Video mode or be can recording. erased, then you can record again it edit it. Disc. same [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R Video Disc (Digital These Discs DVD-R discs - Recordable) only once. After be recorded can be can you finalize formatted to Video mode. only a DVD-R, you cannot record on or Playable on regular DVD players (after finalization) editing features Limited DVD+RW on the Video Disc (Digital These Discs same Playable can DVD+R be can erased, then you can record again DVD+RW on can (Digital These Discs it any ReWritable) repeatedly. Recordings on Disc. compatible players (automatically finalization) playable on DVD+RW compatible players only edited the title/chapter The edited contents Recordings + be recorded be are Video Disc can + Recordable) only once. After be recorded you finalize a after finalization DVD+R, you cannot record on it or edit more. Playable on DVD+R compatible players (after finalization) Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. DVD+R DL (Digital These Discs Video Disc Recordable; Double Layer) or nearly doubled with double layer DVD+R media, allowing consumers to record on a single DVD+R disc. Playable on DVD+R DL compatible players (after finalization) Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. up Storage be recorded + it edit it any can only once. After you finalize a DVD+R DL, you cannot record on more. space is to 8.5GB of video Recommended recordable DVD discs DVD-R DVD+R Mitsubishi (8x, 16x) That's (8x, 16x) Verbatim (8x) Mitsubishi -- -- Note: If a the using this recorder. original recorder. DVD+RW Mitsubishi (4x) Verbatim (4x) JVC (4x) Victor (4x) Maxell (4x) DVD-RW/DVD+RW discs is recorded format the disc using DVD-RW (8x, 16x) Ricoh (8x, 16x) Verbatim (8x) using So if you want to a use Mitsubishi (4x) SONY (4x) Imation (4x) Maxell (4x) Ricoh (4x) personal computer the disc on this or DVD+R(DL) (2.4x, 8x) Maxell (2.4x) Mitsubishi - - - other DVD recorder, you recorder, you cannot must format the disc 5 Discs Playable DVD(8cm/12cmdisc) Discs such Video CD movies that as (VCD) (8 VIDEO CDs or cm be can / 12 cm purchased or rented disc) CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format AudioCD(8cm/12cmdisc) Music CDs CD-Rs/CD-RWs in music CD format that or CD-R/CD-RW (8 cm / 12 cm can be purchased disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files. Notes: recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions. Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable. DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens. If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. Depending CD-R/RW on the conditions of the (or DVD±R/RW) discs cannot be Regional Code This unit has the rear Notes a regional of the unit on or Regional code printed on the rear of the unit. This unit a globe with one or more numbers in it clearly match your unit's regional code or the disc cannot play. If you try to play a DVD with a different regional code from the back" appears Availability of on the TV DVD discs labeled same as visible on the cover. This number must unit, the message "Incorrect region code. Can't screen. copying or feature moving From To HDD DISC No DISC HDD Yes *1 The title is recorded from this unit. 6 play only Codes Most DVD discs have play can "ALL". MP3/WMA DivX Audio CD Video CD Title* No No No No Yes Yes Yes No No Yes JPEG 1 About the internal hard disk drive The internal hard disk drive (HDD) is a fragile piece equipment. Please use the recorder following the guidelines below to protect against possible HDD of failure. We recommend that you back up your important recordings onto DVD discs in order to protect against accidental loss. Do not move Install and the recorder while it is use the recorder on a on. stable, level surface. Do not block the Do not rear vent/cooling fan. excessively hot or humid places, or in places that may be subject to sudden changes in temperature. Sudden changes in use the recorder in temperature can cause the recorder. This can condensation to form inside be a cause of HDD failure. While the recorder is switched on, do not unplug from the wall socket or switch the electricity off from the breaker switch. Do not move the recorder immediately after switching it off. If you need to move the recorder, please follow the steps below: 1. After the message POWER OFF is shown in the display, wait at least two minutes. 2. from the wall socket. Unplug 3. Move the recorder. If there's there is a power failure while the recorder is on chance that some data on the HDD will a be lost. The HDD is very delicate. If used improperly or in an unsuitable environment, it is possible that the HDD will fail after a few years of use. Signs of playback unexpectedly freezing and noticeable block noise (mosaic) in the picture. However, sometimes there will be no warning signs problems include of HDD failure. If the HDD fails, no playback of recorded material possible. In this case it will be necessary to replace the HDD unit. will be 7 Front Panel ab c d e f g h i j k lmn a i POWER button Switches the recorder ON b or OFF. j Disc Tray Insert a disc here. c Display window timeshifting REC: The recorder is mode. recording. HDD bBDVD: The recorder is or a timer recording is programmed. clock, total playing time, elapsed time, title number, chapter/track number, channel, etc. : OPEN/CLOSE Opens or Indicates (Z) closes the disc tray. HDD/DVD Set the recorder's mode to HDD f x (STOP) Stops playback or or DVD. recording. gN/X(PLAY/PAUSE) Starts playback. playback or recording temporarily, again to exit pause mode. Pause press h z (REC) Starts recording. recording time. 8 TV/playback (timeshift) Press repeatedly to set the for a Remote Sensor Point the recorder remote control here. AV IN 4 output of a digital camcorder. (S-VIDEO IN) output of an external source (TV/ Monitor, VCR, Camcorder, etc.). n AV IN 4 (VIDEO IN/AUDIO IN Connect the audio/video Indicates when the recorder is in timer memorized channels. through lDVIN dubbing. Indicates when the recorder is in TV tuner recording e down Connect the S-Video mode. d k m DVD: The recorder is DVD mode. : or TIMESHIFT Connect the DV HDD: The recorder is HDD mode. TV: (V/v) Activates pause live live TV program. Shows the current status of the recorder. T/S: Indicates the PROG. Scans up (Left/Right)) output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.). AV/INPUT: Remote Control or Changes the input to recording (Tuner, AV1-4, IN). for use DV 0-9 numerical buttons: Selects numbered options in a menu. Copies DVD to HDD to DVD). DUBBING: (or HDD TV Control Buttons: See page 55. a b AUDIO ( language an audio ( ): Selects a subtitle language. b the Program REC track number a List the Marker Search c or a mark on menu. recording. Selects the recording REC MODE: mode. Record Displays Timer / (m backward M): or picture. the ON DVD disc. Switches between Title closes the disc tray. Repeat and Title sequence. menu on a List-Playlist menu. a thumbnail TV/DVD: To view channels selected menu. List-Original a THUMBNAIL: Selects MENU/LIST: Accesses and off. on or Enlarges video image. Displays the disc's Title chapter playing/recording. I.SKIP (INSTANT SKIP): Skips 15 seconds forward during playback. REPEAT: Repeat chapter, track, A-B: POWER: Switches the recorder (Z): Opens the or removes marker when d or removes Marker Search menu. title, all. HOME OFF. SETUP: Accesses (N): Starts playback. STOP (x): Stops playback or recording. a or Displays menu. CHP. ADD: Inserts (X) : Pause recording temporarily. HOME: Accesses point during playback. menu, if available. forward. or PLAY OPEN/CLOSE MARKER: Marks any TITLE: Search PAUSE/STEP playback menu. TIMESHIFT: Activates pause live TV/playback (timeshift) for a live ZOOM: SKIP(./>):Gotonextor previous chapter or track. e (O) PIP: Selects PIP function menu. c SCAN RETURN Setup TIMER REC: d Display. SEARCH: Starts (z): DISPLAY: Accesses On-Screen TV program. CLEAR: Removes on - e audio channel. or SUBTITLE ( ) Acknowledges menu selection. Displays information while viewing a TV program. PR/CH (+/-): Scans up or down through memorized channels. Removes the Selects ): ENTER - by by the recorder tuner or the TV tuner. VIDEO Plus+: To program display the for VIDEO Plus+ menu System programming. DVD: Selects the unit's function b / B / v / V mode to DVD. Selects an (left/right/up/down): option in the menu. HDD: Selects the unit's function mode to HDD. Remote Control Remote Control Operation Point the Remote Control at the remote sensor and Installation Remove the rear press the buttons. battery of the Remote insert two R03 Caution Do not mix old and Battery batteries with new batteries. Never mix different types of batteries (standard, alkaline, etc.). cover on Control, the and (size AAA) and matched correctly. 9 and Hookup Settings Rear Panel ab ij a c d e f klm i AERIAL Connect the aerial to this terminal. b c Connect to d output of (Pay-TV decoder, AV OUT 3 AV IN 3 (VIDEO a Set Passes the an external j / AUDIO OUT IN/AUDIO IN (Left/Right)) inputs. (Left/Right)) k l output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.). COAXIAL Connect to f g Cooling h (Digital audio out jack) digital (coaxial) audio equipment. OPTICAL Connect from the AERIAL to your (Digital audio out jack) to digital (optical) audio equipment. a S-Video Input TV. on EURO AV 1 AUDIO/VIDEO Connect to Connect the audio/video e signal S-VIDEO OUT Connect to Top Box, VCR, etc.). TV with video/audio (VIDEO RF. OUT TV/monitor EURO AV 2 DECODER Connect the audio/video source gh a TV with SCART jack. VIDEO OUT SELECT Switch Select either COMPONENT or RGB EURO AV1 AUDIO/VIDEO terminal signal of depending on how you connect the recorder to the TV. m COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Connect to Pr) a TV with Y Pb Pr inputs. fan AC Power Cord Plug into the power Connecting source. to the Aerial Rear of TV Aerial SCART INPUT Remove the aerial cable from your TV set and insert it into the aerial socket at the back of the recorder. socket aerial on Plug one plug socket AUDIO INPUT L VIDEO INPUT R end of the aerial cable into the TV the recorder and the other end into the input ANTENNA INPUT on R your TV set. RF coaxial connection Connect the RF. OUT jack on the recorder to the input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the signal through from the AERIAL jack. aerial Rear of the recorder 10 SCART connection Connections to Your TV Make on the When of the following connections, depending capabilities of your existing equipment. one using jacks, the TV using the scart using the set the VIDEO OUT SELECT switch Tips Audio (Left/Right) Connection on AUDIO OUT connect the recorder. Use recorder's AUDIO OUT only one of the using the audio cables (record deck) Please refer to the manuals of your TV, VCR, System or other devices as necessary to S-Video connection directly to the input channel. not connect the recorder's AUDIO OUT jack to phono in jack (record deck) of your audio sure the recorder is connected right (A). Do jack to of your audio connections described below. IN jacks of the jacks on the TV not connect the the phono in jack system. Connect the S-VIDEO OUT the recorder to the S-Video in S-Video cable jack Caution Component the TV on jack on using the (S). Video connection TV. Tune the TV to the correct video Connect the COMPONENT / PROGRESSIVE SCAN Do VIDEO OUT the system. -- right recorder to the audio left and on make the best connections. -- the TV your TV and other equipment you wish to connect, there are various ways you could Make on jack on the recorder to the using the video cable (V). jack Connect the left and Stereo -- on Connect the VIDEO OUT video in to RGB. Depending jacks Video connection set the VIDEO OUT SELECT switch to COMPONENT. When jack, jack in corresponding cable (T). the COMPONENT/PROGRESSIVE SCAN VIDEO OUT SCART Connect the EURO AV1 AUDIO/VIDEO scart the recorder to the Do not connect your recorder via your VCR. The DVD image could be distorted by the copy protection system. Rear of TV S-VIDEO SCART INPUT INPUT COMPONENT VIDEO INPUT Y Pb VIDEO INPUT AUDIO INPUT jacks on the recorder to the corresponding input jacks on the TV using cable (C). If your television is an Y Pb Pr high-definition or "digital ready" television, advantage of the recorder's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder. Set the [Progressive Scan] option to [ON] on the setup menu for progressive signal, see page 17. a you may take Pr Note: does not work with the Progressive scan connections (yellow VIDEO OUT jack) or analog video S-VIDEO connection. S T C V A Caution Once the setting for Progressive Scan output is image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the entered, recorder. an First, remove the disc in the recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard visible setting, on a and a picture will once again be analog TV or monitor. conventional Rear of the recorder 11 Connecting to an Amplifier Rear of the recorder Connecting to an amplifier equipped with two analog stereo or Dolby Pro Logic ll/ Pro Logic channel Connect the Left and Right AUDIO OUT jacks on the jacks on your system, using the audio recorder to the audio left and amplifier, receiver, (A). or stereo right in cables Connecting to an amplifier equipped with two digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) channel 1. Connect A X O of the recorder's DIGITAL AUDIO one OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. 2. You will need to activate the recorder's output. (See "Audio Settings" Digital A on page digital 18). AUDIO INPUT connection provides the best sound you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your recorder (MPEG 2, and DTS). Check the receiver manual Dolby Digital and the logos output will be in Notes: If the audio format of the digital output does not capabilities of your receiver, the receiver produce a strong, distorted sound or no sound match the at all. -- Six Channel Digital Surround Sound via digital only be obtained if your receiver equipped with a Digital Multi-channel decoder. connection --To see can is the audio format of the current DVD in the display, press AUDIO. This recorder does not perform internal on-screen -- decoding of DTS sound track. To a multi channel surround, you recorder to DTS a this recorder's 12 "Dolby", D trademarks symbol Digital Licensing agreement, the digital DTS digital out when DTS audio stream is selected. will Laboratories. are "DTS" and "DTS Caution: -- Manufactured under license from Dolby Logic", and the doubleof Dolby Laboratories. "Pro the front of the receiver. on Due to the DTS OPTICAL DIGITAL INPUT Amplifier (Receiver) Multi-channel sound digital multi-channel quality. For this COAXIAL DIGITAL INPUT (2 channel) enjoy DTS must connect this compatible receiver digital audio outputs. via one of Theater Digital Out" are Systems, Inc. trademarks of Audio/Video Accessory (A/V) TV VCR, Cable Box, or Satellite Tuner, etc. Connections Connecting You can watch PAY-TV/Canal Plus Decoder a or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder's mains lead from the mains when To watch or connecting the decoder. record PAY-TV/Canal Plus programmes, set [AV2 Connection] option to [Decoder] (see page 17) and set the program's [Decoder On/Off] option to [On] on the Setup menu (page 16). Tip: You do not need to turn signals on the recorder to view the from the connected tuner on your TV. Note: If you disconnect the recorder's mains lead, you will signals from the connected Rear of the recorder not be able to view the decoder. Tip: TV You do not need to turn signals PAY-TV/Canal Plus Decorder on the recorder to view the from the connected tuner on your TV. Notes: Pictures containing copy protection signals prohibit any copying cannot be recorded. SCART AV that If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen. Be sure to connect your VCR to the recorder and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV. Line VCR RECORDER input 1 TV Line input 2 When you record to a VCR from this recorder, do not switch the input source to TV by pressing the Rear of the recorder Connecting jack Connect a VCR to the EURO AV2 DECODER or similar or record the recording device to jack of this recorder. source on the remote. If you are using a B Sky B tuner, be sure to connect the tuner's VCR SCART jack to the EURO AV2 DECODER EURO AV2 DECODER To watch TV/DVD button jack. If you disconnect the recorder's mains lead, you will not be able to view the signals from the connected the VCR or tuner. from EURO AV2 DECODER jack, set [AV2 Connection] option to [Others] (see page 17) and set [AV2 Record] option [Auto], [CVBS] or [RGB] as required (see page 20). to 13 ConnectingtotheAVIN3orAVIN4 Jacks Connect the input jacks (AV IN 3, AV IN 4) on the recorder to the audio/video out accessory component, using jacks on your audio/video cables. Connecting Using a tapes Use Note: Digital Camcorder the front connect DV a DV panel DV IN jack, it is possible to digital camcorder and digitally transfer to DVD. DV cable (not supplied) to connect the DV jack of your DV camcorder to the front panel jack of this recorder. a in/out If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available. IN DV Note: This Jack panel of Accessory Component (VCR, Camcorder, etc.) only. jack is for connection to DV It is not compatible with digital camcorder digital satellite tuners D-VHS video decks. AUDIO OUTPUT R DV L Digital Camcorder DV IN/OUT VIDEO OUTPUT S-VIDEO OUTPUT Rear of the recorder 14 OR Front of the recorder Front of the recorder or Using From the Home Menu Media for playback Press HOME to 1. screen and you recording display can access the Home Menu a main screen. option Operation 1. Press SETUP and the 2. Use v / V to select the desired 3. While the desired item is move Setup menu appears. option. selected, press B you Use v / V to select the second desired Use the v / V and ENTER buttons to select the 5. Press B to sub 6. Use v / V to select the desired option options to to the second level. 4. want. Sub 3. all the of the recorder. Use the b / B buttons to select 2. General the Home Menu appears. you want. move option. to the third level. setting then press ENTER to confirm your selection. Some items require additional steps. Press SETUP to exit the 7. Setup Hokupand Setings menu. Note: To exit the HOME menu, press HOME. 4. Press b to go back to the TV TV HDD: Returns to live TV viewing for HDD General viewing for DVD Auto recording. TV DVD: Returns to live TV recording. Displays the Title List menu for HDD DivX: Displays the [Movie List] (page 27) HDD. menu - - equipped with a frequency capable of receiving up to tuner (page 42) channels. for HDD. Preparation: Connect the recorder to the desired DISC: - Programming synthesized HDD: level. Settings This recorder is MOVIE previous as shown in Connecting 88 TV type of aerial, to the Aerial on page 10. Displays Title List menu for recordable disc (page 42) Displays [Movie List] menu for DivX disc. (page 27) Plays back Video CD or DVD-Video disc (page 23-26). PHOTO (See page 30) Displays [Photo List] menu for HDD. DISC: Displays [Photo List] menu for disc. HDD: MUSIC (See page 28) Displays [Music List] menu for HDD. DISC: Displays [Music List] (or Audio CD) menu HDD: for disc. SETUP Start: (See page 15) Displays Setup 1. Select the 2. Press B to [Start] menu. 3. Initial In this system, customize the there settings move icon is to the third level. highlighted. Press ENTER to begin the channel search. automatically cycle through all channels in the area and place them The tuner will Settings menu [Auto Programming] option. available several ways to provided. Most menus consist of three levels to set up the options, but greater depth for the variety of settings. some require in the tuner's memory. are Note: After you have connected your recorder for the very first time. If you press SETUP for initial setting, you can only set the [Auto Programming] option. Then you can set the other options. 15 General Program You You Edit edit can move, Program Settings (Continued) a channel manually (add, delete, name, etc.). Select 2. Press ENTER while [Program Edit] option Program perform a search to select and store TV manually. When you select [Program Edit] in step 4 above, display for setting channels appears. can channels 1. The Edit List [Edit] menu the 1.Useb/Btoselecttheitemandpressv/Vto change the setting. then press B. is selected. appears. [PR] indicates the selected programme Searches for [Seek] Searching stops a channel position. automatically. when the recorder tunes in a channel. [Ch.] Changes the channel number. Fine tunes the channel to obtain [MFT] picture. 3. Use v / V to select PR number then press a Use v / V to select the program ENTER. option then press AV1 Decoder [Program Edit] Sets the channel manually. See "Program Edit" on the right. [Station Rename] Changes the station name. The display for entering characters appears. To enter Names see page 46. be up to 5 characters long. Sorts the programme positions characters, List. Press v / V to move on the the selected programme position to a new location. [Delete] Disables a programme position you do not need. [Decoder On/Off] Sets the channels for the decoder. You need this setting to watch or record PAY-TV/Canal Plus programmes. Press ENTER so [Decoder] appears on the Press ENTER display. setting. [NICAM Auto/off] display. is not to turn off the Sets the channels for the NICAM broadcast. the again is lit Normally, [NICAM] on If the sound from NICAM broadcast clear, press ENTER so [NICAM] disappears. 5. Press RETURN List 16 menu. (O) repeatedly to exit Sets the EURO AV1 AUDIO/VIDEO encoded video 1. Program jack for inputting signals. Press AV/INPUT while the Program List menu appears. 2. can [Move] Program clearer 2. Choose OK then press ENTER to confirm the setting and returns to the Program List menu. ENTER. 4. a Press ENTER [Canal+] appears on the display. again to turn off the setting. Off: Inputs the signals from the EURO AV1 AUDIO/VIDEO jack. Normally select this. On: The encoded video signal input from the EURO AV1 AUDIO/VIDEO jack is output to the EURO AV2 DECODER jack for decoding. The decoded signal is then input back through the EURO AV2 DECODER jack so you can so Press ENTER record or view PAY-TV/Canal Plus programmes. General Progressive Scan Settings (Continued) Auto Clock Set When Channel auto search is Time and Date also set are the recorder completed the actual automatically. If the time in is not correct, the clock must be set display manually. 1. Select 2. Use v / V to select [Clock set] option then press B. then press [Auto] option ENTER. Note: There are cases where the TV station does not send, sends wrong date and/or time information and the recorder sets the incorrect time. or If this happens, manually. we recommend that you set the clock Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, but are connecting the recorder to a standard (analog) television, set Progressive Scan to [OFF]. If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to [ON]. Note: Progressive Scan will be disable in the when the VIDEO OUT SELECT switch panel is set to RGB setup on menu the rear position. Caution Once the setting for Progressive Scan output is image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the entered, Manual Clock Set 1. Select 2. Use v / V to select [Clock set] option then press B. [Manual] option recorder. then press ENTER. Enter the necessary information for date and time. (left/right): Moves the cursor to the previous 3. b / B next column. or v / V the setting Press ENTER to confirm your setting. (up/down): Changes cursor position. at the First, remove the disc in the recorder. standard visible setting, on a and a picture will once again be analog TV or monitor. conventional You can connect a decoder or EURO AV2 DECODER socket TV Selects the aspect ratio of the connected TV (4:3 standard wide). [4:3] TV. When you select below. to [16:9] Select this when TV with a 4:3 a to connecting a screen wide-screen [4:3] Power Save Mode the upper and lower a a wide picture [TV Aspect]. wide portions picture of the [Pan Scan] Automatically displays screen set up the unit into Nothing is displayed an economic power save display window in the when the unit is turned off. display [Letter Box] Displays not fit. can mode. is selected in the entire recording or device. wide mode function. You when Canal Plus decoder. similar Mode Selects how to the back. Select [Others] if you connect the recorder's EURO AV2 DECODER jack to a VCR connecting [4:3], set [Display Mode] TV Display on [Decoder] [Others] Select this when or or Select other device to the if you connect the recorder's EURO AV2 DECODER jack to a PAY-TV [Decoder] Aspect or Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the AV2 Connection current 4. an and cuts off the a on the screen [OFF] [ON] with bands portions Power Save Mode is active. on Notes: screen. wide Power Save Mode is not active. picture that do on The encoded television PREMIERE) are signals (CANAL+ or not decoded in the Power Save Mode. The Power Save Mode is not available in the standby mode for the timer recording and when power off of the unit after receiving the encoded television signals (CANAL+ or PREMIERE). 17 General Settings (Continued) Audio Settings Each DVD disc has Initialization variety of audio output options. Output according to the type a Set the recorder's Audio You reset the recorder to its can original factory of audio system you and initialize the HDD. settings [Factory Set] use. If you need to, you can reset the recorder to all its factory settings. Some options cannot be reset. (Rating, Password, and Area Code) [HDD format] Initializes everything recorded on the HDD (Hard Disk Drive): the HDD will be erased. 1. Select 2. Press v / V to select the desired [Initialize] option then press B. option then press ENTER. Dolby Digital The confirm message will appear. 3. Use b / B to select [Yes] or [No] then press ENTER. [Bitstream]: / DTS / MPEG Select "Bitstream" if you connect the recorder's DIGITAL AUDIO OUT or other with equipment a jack to Dolby Digital, an amplifier DTS or MPEG decoder. Language Settings MPEG): Select when digital stereo amplifier. Dolby Digital or MPEG will be [PCM] (for Dolby Digital connected to a DVDs encoded in automatically / two-channel downmixed to two-channel PCM audio. [Off] (for DTS): If you select "Off", the DTS signal is not output through the DIGITAL AUDIO OUT jack. Sampling Frequency If your receiver or amplifier is NOT capable of 96 kHz signals, select [48 kHz]. When this handling choice is Menu Display 96 kHz Select a language for the Setup menu and on-screen display. Disc Menu/Audio/Subtitle [Original]Refers the disc was to the original language in which [Off](for To select another Disc them. If your receiver or 96 kHz select amplifier is capable of handling [96 kHz]. When this choice is made, this unit will pass each type of signal through without any further processing. signals, recorded. language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 54). If you enter the wrong language code, press CLEAR. [Other] made, this unit will automatically convert any to 48 kHz so your system can decode signals Subtitle) : Turn off Subtitle. DRC (Dynamic Range Control) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen without losing clarity to a movie at a lower volume of sound. Set DRC to [ON] for this effect. Vocal Set Vocal to DVD is [ON] only when a multi-channel karaoke playing. The karaoke channels on the disc will mix into normal stereo sound. 18 Lock (Parental Control) Settings Set Password 1. Select 2. Follow [Set Password] option 2 then press B. shown "Rating". password, select the [Change], press ENTER and input the new 4-digit code then press ENTER. Input it again to verify. To delete the password, select [Delete] then press To step change as the ENTER. If you forget your 4-digit code If you forget your password, to clear the current password, 1. Rating Blocks playback 1. Select 2. To of rated DVDs based the on their 3. Select [Yes] password is then press B. Rating, Password and Area Code input the 4-digit security code code you code and Select a rating using "Area the v / V buttons. [8]: Rating one (1) has the rating eight (8) is the least most restrictions rating selection. [Area Code] option 2. Follow step 3. Select the first character Shift the 5. available a on the disc. The alternative must have the rating or a lower one. If no suitable alternative found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. 2 as shown then press B. "Rating". the v / V using cursor using B buttons and select using v / V buttons. Press ENTER to confirm your DivX rating for the recorder, all disc scenes with rating or lower are played. Higher rated are not played unless an alternate scene is same (See the second character Note: scenes used were to the list Codes", page 54.). Select Registration We If you set the same whose standards disc, referring 1. 4. restrictive. If you select [No Limit], parental control is not active and the disc plays in full. Press ENTER to confirm your 6-digit buttons. [No Limit]: 4. an area to rate the DVD video ENTER, press CLEAR. - 1 level icon. then press ENTER. The 4-digit cleared. Enter a new code. Enter the code of security a 4-digit press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing and an Area Code must you created. If you have not yet entered a are prompted to do so. Input Hokupand Setings below. then select number "210499". rated. are [Rating] option access features, you [1] Display Setup procedure menu 2. Use the Number buttons to enter the content. Not all discs 3. follow the is Code area code selection. DivX VOD (Video On Demand) you the DivX code that allows you to rent and purchase provide registration videos using the DivX VOD service. For more information, visit www.divx.com/vod. 1. Select 2. Press ENTER while [DivX Reg. Code] option registration 3. Use the [View] then press B. is selected and the code will appear. registration videos from Divx code to purchase or rent the VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit. Note: All the downloaded videos from DivX be played back on VOD can only this unit. 19 AV2 Recording Settings You Recording can video select the input signal type of the signal when recording from the device connected to the EURO AV2 DECODER socket. input signal will automatically signal received. [CVBS] Only for recording CVBS input signal. [RGB] Only for recording RGB input signal. [Auto] The video follow the video Disc Disc Format Record Mode Set You LP can set the Record DVD-R: The recorder initialize the disc to Video mode. The Aspect recording, aspect ratio to suit the material you can recording you're recording (16:9 always be Video DVD-RW disc is initialized to Video mode. Also, you Recording mode will recording DVD-RW/DVD+RW/DVD+R(DL): The Initialize menu will appears. Select [OK] then press ENTER. set the 4:3). DV disc, the recorder will mode. When DVD or If you load a completely blank initialize the disc. picture quality for recording; (High Quality), SP (Standard Quality), (Low Quality), EP (Extend Quality). XP Settings can reformat the DVD-RW/DVD+RW from the Setup menu as below. 1. Select [Disc Format] option 2. Press ENTER while Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. digital Some camcorders have two stereo tracks for audio. One is recorded at the time of other is for after overdubbing setting, the while shooting is used. On the Audio 2 setting, the On the Audio 1 shooting; shooting. sound that was the recorded overdubbed sound is used. TV Recording When TV Format Disc Audio recording with 3. bilingual, you can Auto When 20 10 minutes For 4. DVD+RWs, go (VR Mode or to step 4. Use b / B to select It takes markers are this interval to 15 minutes. If you select switch off automatic chapter marking with the desired mode a [OK] then press ENTER. few moments to initialize the disc. Caution recording in Video mode, chapter specified setting. You can change [None], altogether a Mode) then press ENTER. Confirm message will appear. language Chapter put in minutes, 5 and Sub Use b / B to select [Start] appears. Video choose audio channel to record. [Main+Sub] Main language [Main] Main language only [Sub] Sub language only menu then press B. is selected. or [None] setting. If you want to change the disc format, recorded on the disc will be erased. everything Disc Disc Label Settings (Continued) Use this to enter Finalize recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing Finalizing 'fixes' the MENU/LIST The disc a Select 2. Press ENTER while [Disc Label] option Keyboard DVD-RW disc record and edit display be up to 32 characters long. on a different recorder, you will limited character set. 1. To enter Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc can name name can only see Caution except DVD+RW. However, you for the disc. This For discs formatted TITLE. or a name appears when you load the disc and when you disc information on-screen. a by choosing [Unfinalize] option. menu [Edit] then press B. is selected. appears. characters, see Hokupand Setings page 46. Disc Protect When recording in DVD+RW / +R disc formatted DVD-RW accidental disc, set to recording, editing or or VR mode [ON] to prevent deleting of the disc loaded. If you need to unlock the disc to make select edits, [OFF]. PBC PBC stands for menus some Select 2. Press ENTER while [Finalize] option Finalize Select then press B. menu [Finalize] is selected. Playback Control and refers to special navigation features that are available on Video CDs. [ON] 1. and Video CDs are played according to the PBC, if available. [OFF] Video CDs are played the same way as Audio CDs. appears. then press ENTER. The recorder starts finalizing the disc. 3. [OK] Note: How long finalization takes number of titles on DVD+R DL disc can on the type of disc, and the depends disc, how much is recorded on the the disc. take up to 30 minutes to finalize. Tips If you load a finalized, you DVD-RW that has can Unfinalize from the Finalize you can edit and re-record onto the disc. You cannot unfinalize If already been by choosing menu. After doing this, 'Unfinalize' it [Disc Protect] option not available. To a DVD-R and DVD+R disc. is set to finalize, set [ON], the finalize is [Disc Protect] option to [OFF]. 21 General Explanation On-Screen Display This manual of Displaying You loaded operating the require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the gives basic instructions for recorder. Some DVDs recorder or is not available Displaying on the disc. Information While can Watching 1. 2. display Press DISPLAY once to show current status. Press DISPLAY once again to show various information. The items During viewing the TV, press ENTER or DISPLAY display/remove the information displayed on-screen various information about the disc on-screen. playback TV Disc Information displayed differ depending playing status. type or You can on the disc to on-screen. Indicates channel audio number, station signal (STEREO, MONO) name, and received by the tuner. Indicates the record mode, free space, and elapsed time progress bar. Indicates disc name and format. 3. change select or an item select the by pressing v / V and setting by pressing b / B. For details about each item, see the pages in parentheses. (or track) number/total (or tracks) (page 23, 25) [Chapter]: Current chapter number/total number of chapters (page 23) [Time]: Elapsed playing time (page 25) [Audio]: Selected audio language (DVD VIDEO only) or audio channel (page 24) [Subtitle]: Selected subtitle (page 24) [Angle]: Selected angle/total number of angles (page 25) [Sound]: Selected sound mode (page 26) [Title]: Current title number of titles Indicates current date and time. Note: If button is pressed display disappears. 22 no for 10 seconds, the on-screen Playback General Features Playback 1. Load your chosen disc in the tray, with the playback side down. 2. Starts menu 3. To 4. playback using the HOME (see page 15). press STOP playback, (x). The unit records the stopped point, depending on the disc. "Xx" appears Press PLAY (N) to resume playback (from the scene point). If you press ("x" appears on the screen.), the unit will clear the stopped point. stop Press OPEN/CLOSE Press OPEN/CLOSE (Z) (Z) to on the STOP screen briefly. (x) again or unload the disc the disc. remove to close disc tray or press POWER (1), the disc tray closes automatically and unit turns off. Note: If Parental Control is set and the disc is not within the Rating settings (not authorized), (see "Rating", on page 19). entered and/or the disc must be authorized Buttons Operations OPEN / CLOSE PAUSE/STEP (Z) (X) Opens or 4-digit code must be Discs closes the disc All Discs tray. press PAUSE/STEP During playback, playback. PAUSE/STEP the (X) repeatedly to (X) All Discs to pause play Frame-by-Frame. Tip: You advance back up the picture frame-by-frame by pressing repeatedly during PAUSE mode. The picture frame-by-frame in reverse is not available for can or b / B Video CD. SKIP (. / >) During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. Press SKIP . twice briefly to step back to the previous chapter/track. Tips: To go directly to any chapter during DVD playback, press DISPLAY twice and press v / V to select the chapter icon. On Then, input the chapter number or use Audio CD, to go directly to any track, an track number using the numbered buttons b / B. enter the (0-9) during playback. SCAN (m / M) During playback, press SCAN (m required scan speed. or M) repeatedly to select the HDD, DVD; 5 steps DivX; 4 steps Video CD, Audio CD; While the 3 steps is playback paused, press repeatedly to play in slow motion. SCAN (m or M) HDD, DVD; 4 steps CD; 3 steps (Forward only) Video ZOOM During playback or pause mode, press ZOOM to enlarge image. x2 size x4 size x1 size (normal size) (x1 size You can move through the zoomed picture using bBvV the video → → → buttons. 23 General Features Playback Buttons (Continued) Operations REPEAT Discs During playback, desired HDD press REPEAT repeatedly to select a repeat mode. DVD (Title/Off), (Chapter/Title/Off) (Chapter/Title/All/Off) Video CD, Audio CD (Track/All/Off) MP3/WMA (Track/Folder/Off) VR mode DVD-RW Notes: On Video CD with must set PBC to [OFF] in Repeat function. See page 21. If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels. a Setup A-B to menu use PBC, you the the During playback, each press of A-B button to select point A point B and repeats a sequence from point A (Starting point) to point B (End point). and Note: HDD During playback, you cannot select sequence less a than 5 seconds. TITLE If the current DVD title has on MENU/LIST SUBTITLE AUDIO ( the The disc ( ) ) a menu, the title Otherwise, the disc screen. menu appears on the menu menu appears may appears. screen. During playback, press SUBTITLE then press b repeatedly to select a desired subtitle language. / B Press AUDIO then press b / B repeatedly to hear language or audio track. a different audio Note: Some discs feature both soundtracks. There is no Dolby Digital and DTS analog audio output when selected. To listen to the DTS recorder to a soundtrack, DTS decoder via one of the DTS is connect this digital outputs. See page 12 for connection details. Press AUDIO then press b / B repeatedly during playback a different audio channel (STEREO, LEFT or to hear RIGHT). With DVD-RW discs recorded in VR mode and HDD that have both a main and switch among Main Press AUDIO audio channel I.SKIP Press I.SKIP a (L), Bilingual audio channel, you (R), or Main+sub (L+R). can Sub repeatedly during playback to (STEREO, LEFT or RIGHT). repeatedly during playback to hear skip a different forward 15 seconds. In HDD skips 24 playback forward or Timeshift or reverse mode, each press 5 minutes. b / B If is The displayed DVD VCD may be displayed first after Video CD which contains a menu. loading a menu screen menu screen DVD or Marker Search a DVD HDD -RW VR DVD VCD To enter Usetheb/B/v/Vbuttonstoselectthe Press TITLE view, then press ENTER want to title/chapter you start playback. MENU/LIST to return to the or You to menu screen. -R +R from up to six memorized at the playback To enter points. +RW Marker a start can -RW Video desired point the TV screen marker, press MARKER a the disc. The Marker icon appears to enter up to six on on briefly. Repeat markers. VCD Use the number buttons to select the track you want to view. Press RETURN to return to the (O) To Recall or 1. During disc search menu menu screen. Menu for setting and the exact operating procedures using the menu may differ depending on the Clear disc. Follow the instructions Setup the each on You may also set PBC to screen. (see menu page [OFF] 2. menu 3. under 21). -RW Video When +RW disc has a another title -R more +R than Press DISPLAY twice appropriate a To start 1. can move +R HDD DVD then is erased from the marker search Playbck menu. use (0-9) or b / B to playing -RW VR -RW Video +RW DivX Camera at any chosen time on the disc: during playback. The time the elapsed playing time. Press v / V to select the time clock icon the 1. If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then 3. right. Press ENTER to confirm. selected time. Playback scenes recorded at different angles, you can change angle during playback. 2. enter the correct numbers. DVD If the disc contains Press DISPLAY Display start time in Angle camera hours, minutes, and required seconds from left to 4. starts from the Then, press the Press DISPLAY twice Input playback Or, press CLEAR and the marked scene. to and "0:00:00" appears. 3. clear. DivX title, you during playback numbered button search box shows 2. or Press ENTER and title number. Time Search -R press SEARCH. The marker on the screen. -RW VR DVD one appears follows: as v / V to select the title icon. select HDD playback, Useb/B/v/Vtoselectamarkedscenethat marked to another TITLE Marked Scene you want to recall scene Moving a appears to a during playback. on the TV different camera The On-Screen screen. Usev/VtoselecttheAngleiconintheOnScreen Display. Use b / B to select a desired The number of the current TV angle. angle appears on the screen. starts from the Tip: The ANGLE indicator will blink scenes recorded at different angle switching is on the TV angles screen at to indicate that possible. 25 3D Surround +R DVD This unit can -RW VR VCD produce -RW Video +RW a 3D Surround effect, which playback five more speakers, instead of the speakers normally required to listen to multi- 1. Press DISPLAY Display 2. home theater the TV -R HDD +R -RW VR DVD VCD or system. during playback. on Picture) The On-Screen screen. Usev/VtoselecttheSoundiconintheOnScreen 3. appears a +RW This function enables you to view the stored stations in sub picture during playback. from two conventional stereo in (Picture -RW Video simulates multi-channel audio channel audio from PIP -R DivX Display. Useb/Btoselect"3DSUR". To turn off the 3D Surround effect, select "NORMAL". Last Condition Memory This recorder memorizes the DVD On and off settings for Settings remain in user the last disc that you have viewed. memory even if you remove the disc from the recorder or switch off the recorder. If you load a disc that had its settings memorized, the latest stop position is automatically recalled. -- on the sub picture, press this to switch it off. mode selection for sub picture input mode for the this button is pressed, each picture is displayed as Press AV/INPUT to select the sub picture. Each time input mode for the sub Tuner→AV1→AV2→AV3→AV4 stored in memory for use any time. This recorder does not memorize settings of a disc Settings Input again shown below. Notes: -- Press PIP to switch button are if you switch off the recorder before play it. commencing to Program selection for sub picture (+/-) to change the program when sub picture's input is set to tuner. The selected program number is displayed on the TV screen. You can view the selected program by pressing STOP (x). Use PR/CH Sub picture position change repeatedly until desired position is achieved. The sub picture moves clockwise or Press b / B counterclockwise. Zoom Sub picture repeatedly to enlarge the sub picture, magnification level increases up to three steps. Press ZOOM the 26 a The recorder can files, Movie List DivX Movie File Playing play Divx files. Before playing requirement" on right. DivX 1. read "DivX file 1. Press HOME then select 2. Select a [MOVIE] option. media that contains DivX press ENTER. The [Movie List] 2. menu appears on the TV options Press v / V to select a folder/file on the [Movie List] menu then press ENTER. [Movie List] menu options appear. The menu options displayed differ depending on the selected media. then file(s) menu screen. Pressv/V/b/Btoselectanoption,andpress ENTER. [Play] Start playback the [Open] Opens the folder folder appears. [Delete] Deletes the selected title. and file(s) or list of files in the a from the folder(s) media. [Rename] Edits the file name.(page 32) [Move] Moves the file(s) to another folder media. (page 33) [Copy] Copies the file(s) to another folder media. (page 33) 3. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the DivX file v / V buttons Available resolution size: 720x576 the remote to on and highlight press ENTER. 4. pages 23-26. 5. Press STOP to The stop the playback. [Movie List] menu or Playbck requirement DivX file extensions: If you want to view a particular file, press v / V to highlight a file and press PLAY (N). You can use variable playback functions. Refer to or (W x H) pixel ".avi", ".divx" DivX subtitle: ".smi", ".srt", Playable (Micro DVD format only)", ".txt (Micro DVD format only)" Playable Codec format: "DIV3", "MP43", "DIVX", ".sub "XVID", "DX50" appears. Playable Audio format: "AC3", "PCM", "MP2", "MP3", "WMA" Notice for displaying If the subtitle does not the DivX subtitle display properly, please the steps below. 1. Press PAUSE when the subtitle appears. 2. Press and hold SUBTITLE about 3 seconds. The 3. language code will appear. Press b / B to select another the subtitle is 4. follow Press PLAY language displayed properly. (N) to continue playback. Sampling frequency: 48 kHz (MP3), within 8 - within 32 - 48kHz (WMA) Bit rate: within 8 320kbps (MP3), - within 32 - 192kbps (WMA) CD-R Format: ISO 9660 and JOLIET. DVD±R/RW Format: ISO 9660 (UDF Bridge format) (total number Maximum Files/Disc: Less than 1999 code until of files and Notes folders) DivX format on If the number of the screen frames per this unit may not second, frame is over 29.97 operate normally. If the video and audio structure of recorded file is not interleaved, returns to the If the file is recorded with only 1-point * menu screen. GMC, the unit supports of the record level. GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 DivX or There Xvid, are usually have this option. different levels of GMC called encoders, like 1-point, 2-point, or encoding, 3-point GMC. 27 Playing Audio CD an or MP3/WMA file 1. The recorder play playing MP3/WMA files, requirement" on right. read "MP3/WMA audio The HOME 2. 2. 3. menu [MUSIC] option. Select a menu The menu The menu media that contains MP3/WMA options appear. options displayed Start on or the TV [Random] audio Start screen. You a track then press PLAY (N). variable playback functions. Refer to pages 23-26. 1. Press DISPLAY to view ID3-Tag the MP3 file. If information is not ID3-Tag information for present, [ID3-Tag: None] will appear. If you select a folder, the number of subfolders and number of MP3/WMA files in the folder Press DISPLAY information again to remove to the upper use stop playback at any time, press STOP. can create new folder. Select [New Album] option the Music-HDD menu then press ENTER. "NONAME##" folder is created. on stop random playback. file(s) Edits the file Moves the a list of files in the media. (page 33) from the media. (page 32) name. file(s) to another folder or [Copy] Copies the file(s) media. (page 33) to another folder or Adds the Press v / V to select menu options to track(s) List. Program a file then press ENTER. appear. Press v / V to select then press [Random] option The unit automatically begins and "RANDOM" appears To return to normal option again on random the playback, playback menu screen. select [Random] then press ENTER. Tip: during Random playback, unit selects another track and resumes Random By pressing SKIP > the playback. MP3/WMA audio file Tip: You on ENTER. 3. directory, and press ENTER. highlight You also display HOME menu to select another media by pressing HOME. move 2. the the v / V to To or [Move] The are screen. If you want to 5. depending Random Tips: displayed. differ the folder and Deletes the [Program Add] (page 29) starts. can use the Audio CD folder appears [Rename] Playback on the selected title. playback [Open] Opens [Delete] Use v/V to select folder/file Pressv/V/b/Btoselectanoption,andpress [Play] title then press ENTER. The [Music List] menu appears 4. a then press ENTER. ENTER. appears. Select Music options menu the selected media. Press HOME. 1. Press v / V to select or audio CDs and MP3/WMA files. can Before file Audio CD and Music requirement File extensions ".mp3", ".wma". Sampling frequency: within 8 48 kHz (MP3), - within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA) CD-R Format: ISO 9660 and JOLIET. DVD±R/RW Format: ISO 9660 (UDF Bridge format) Maximum Files/Disc: Less than 1999 28 (total number of files and folders) with Audio Program Playback CD and MP3/WMA file 1. contain up to 99 Audio CD tracks MP3/WMA files. Use v / V to select a Audio CD menu. 1. You Music or track/file menu cancel the by pressing (or folder) on 2. The files/tracks Repeat step (folders). or (folders) 2. options the left side of the List menu. [Program Add] option [Save] If you select a folder for Programmed Playback, all tracks/files in the folder are added to the Program List. Program a (N) Playback stops after playing the last programmed change the (HDD only) Select List options appears then press ENTER. menu [Delete] option Track Order in the Program List Select the track you wish to move on the Program List. Use MARKER button to select multiple tracks. 2. Press ENTER. The 3. Select 4. Use v / V to track in the program list. Program tracks. 3. 1. to start. to Tracks Track from the Press ENTER. The Use v / V to select the track you want to start Press PLAY track(s) Memorizes the program list. 2. Changing playing. Playbck Program Select the track you wish to erase from the Program List. Use MARKER button to select list. programmed track you selected last is highlighted on the program list. from the Repeat mode. [TRACK] Repeats the current track. [ALL] Repeats all tracks on the Program List. [OFF] Cancels Repeat mode (no display). multiple to the track(s) Press REPEAT to select the desired 1. move Moves the Repeat Programmed Erasing The stop random playback. or program order. 1-3 to mark additional tracks. Note: Use B to then press ENTER menu. [Move] then Start Deletes the [Delete] on option an [Play] Playback begins in the order in which you programmed the tracks from the selected track. folder. [Random] appear Repeat steps Use v / V to select to confirm your selection. press ENTER. 7. Program on 1 to mark additional file/track Use v / V to select the 6. the CLEAR button. To Press ENTER. 5. on Press MARKER. marked file/track 4. track/file the A check mark appears on the file/track or folder. Press MARKER again to cancel the 3. a selections, press CLEAR again. Selecting multiple 2. Press v / V to select 256 select all MP3/WMA files and folders can the Music 1. or options menu List then press ENTER. The menu options appear. Program Playback enables you to make custom playlists of Audio CD or MP3/WMA tracks. Programs can List Program options appears then press ENTER. the yellow bar to the desired menu [Move] option move location, then press ENTER. To exit 8. Program Playback and resume normal playback, select a track on the List and press PLAY (N). Save Your you have Tip: You can access or remove pressing the Program List screen Program List (HDD only) This recorder memorizes the by 1. Select The MENU/LIST. 2. user program list that programmed. a track menu on the options Program List. appear. Select The [Save] option then press ENTER. Program List is saved in the HDD's PROGRAM folder. 29 a The recorder can JPEG Photo List JPEG File Viewing JPEG files. Before play recordings, read "Photo file playing requirement" on 1. menu Press HOME. The HOME a file the [Photo List] differ depending on then press ENTER. The menu The menu options appear. options displayed on the selected media. menu You appears. 2. Select [PHOTO] option. 3. Select a can select all files and folders pressing [Photo List] appears on the TV 1. screen. menu by selections, again. Selecting multiple menu the on CLEAR button. To cancel the press CLEAR media that contains JPEG file then press ENTER. The options Press v / V to select 1. right. menu files (folders) Press MARKER. A check mark appears on the file or folder. Press MARKER again to cancel the marked file or 2. folder. Repeat step 1 to mark additional file Use v / V to select 2. an option (folders). then press ENTER to confirm your selection. [Open] Opens the folder and a list of files in the folder appears 4. Useb/B/v/Vtoselectafile,thenpress [Full Screen] ENTER. The menu options appear on the left side of the [Delete] menu. If you want to move to the upper v / V to directory, use the [Full Screen] [Copy] Copies the file(s) media. (page 33) then press ENTER. The selected image is displayed name. full in full screen. upon the size and number of JPEG it could take a long time for the recorder to Depending menu. (page 32) [Move] Moves the file(s) to another (album) or media. (page 33) and press ENTER. HOME menu to select another Use v / V to select Slide Show Edits the file [Rename] highlight You can also display media by pressing HOME. files, as Deletes the selected file from the media. [Slide Show] Displays Tips: 5. Shows the selected file screen. folder to another folder or Tip: You create can Select new folder in the HDD. [New Album] option then press ENTER. "NONAME##" folder is created. read the files. Photo file requirement File extensions ".jpg" Photo size: Less than 4MB recommended CD-R Format: ISO 9660 and JOLIET. DVD±R/RW Format: Press ENTER to appear or disappear this during viewing the full screen. menu ISO 9660 (UDF Bridge format) Maximum Files/Disc: Less than 1999 6. To stop viewing The 30 [Photo List] at any menu time, press STOP. appears. Notes on (total number of files and Progressive and lossless files supported. are folders) JPEG file not compression JPEG image To listen to music while slide show Skip Images While once viewing a press SKIP picture, to advance to the next file simultaneously (.or >) return to the or You previous file. Rotate Images can display photo files while MP3/WMA music files recorded Use v / V while clockwise or 1. Select viewing a picture to flip the (Refer picture counterclockwise. [Slide Show] option to "Photo List The Slide Show 3. [Slide Show] option to "Photo List (Refer menu to HDD. the [Photo List] menu options" on page 30). on 2. Press ENTER. View Slide Shows 1. Select menu listening on the menu menu [Simultaneous Slide Show [Photo List] options" on page 30). on Select appears. Music play] option on the menu 2. Press ENTER. The Slide Show menu appears. 4. 5. 3.Useb/B/v/Vtosettheoptions. [Object] option: [Selected] Views slide show only Use the MARKER button to select [All] multiple menu appears. multiple files. [Select All] option to select all tracks press ENTER. Select [Deselect files. play Press MARKER to select Select selected files. Playbck Press ENTER. Simultaneous Music All] option then to deselect all selected tracks then press ENTER. Select [Cancel] option to exit this menu then Views slide show all files. [Speed] option: press ENTER. Sets the Slide Show speed to [Slow], [Normal], or 6. [Fast]. Use b / B / v / V to highlight [Start] option then press ENTER. 4. Select the [Start] option then press ENTER to start the Slide Show. 5. Press STOP to the [Photo List] stop the Slide Show and returns to menu. To Pause the Slide Show 1. Press PAUSE/STEP (X) to pause slide show. 2. When you want to continue slide PLAY show, press (N). 7. Press STOP to stop the Slide Show and the menu. [Photo List] return to 31 Editing MP3/WMA, JPEG, DivX a Naming a file file You These independently. long. descriptions are MP3 file's operation for example, other kind's files are operated same way. Erasing You on a can pressing DivX file(s)/ 3. file you wish to erase on the menu. select all files and folders on the menu CLEAR button. To cancel the a the HDD MP3/WMA files Names can on the HDD be up to 32 characters file you wish to rename on the menu. Press ENTER. The the HDD. press CLEAR menu options appear Select [Edit] option then options appears. on the menu. press ENTER. by selections, again. Selecting multiple 1. or Select Edit Select You MP3/WMA, JPEG 2. HDD file(s)/folder(s) from the can erase folder(s) 1. a 1. can name on files (folders) Press MARKER. A check mark appears on the file or folder. Press MARKER again to cancel the marked file or 2. folder. Repeat step 1 to mark additional file (folders). 4. 2. Press ENTER. The 3. menu Select options [Delete] option file(s) is The selected 32 appear on the menu. then press ENTER. deleted. Select [Rename] option then Keyboard menu appears. To enter characters, see press ENTER. page 46. Copying a to another media or file(s) Moving folder You You can copy to another media file(s)/folder(s) a Select You a can pressing CLEAR button. To cancel the 1. 1. by 2. selections, again. files Follow (folders) 1-3 steps as shown left. Press ENTER. The 3. Selecting multiple file(s)/folder(s) to another media or moving, the file(s)/folder(s) are deleted from the current location. file you wish to copy on the menu. select all files and folders on the menu press CLEAR file(s) can move a folder. After or folder. 1. a options Select Move appear [Move] option menu on the left side of the menu. then press ENTER. will appear. Press MARKER. A check mark appears on the file or folder. Press MARKER again to cancel the marked file folder. or 2. Repeat step 1 to mark additional file (folders). Press ENTER. 2. The menu options Select 3. Edit on the menu. Copy Playbck then press ENTER. [Edit] option options appears. Select 4. appear [Copy] option menu 4. then press ENTER. You 1. appears. can After select a album (folder) to move. selecting a media then press (folder) list appears. ENTER. The album 2. Select a folder. Also, you can create [New Album] option new on album the Move (folder). menu Select then press ENTER. "NONAME##" folder is created. 5. You 5. 1. 2. can select a album After (folder) Select [Move] option moving. then press ENTER to begin to copy. selecting media then press ENTER. The album (folder) list appears. a Select a folder. Also, you can create [New Album] option new on album the Copy (folder). menu Select then press ENTER. "NONAME##" folder is created. Select 6. [Copy] option copying. then press ENTER to begin Note: If a folder's depth is more than 5 level, the copy is not available. 33 Note: Recording About DVD The maximum number of titles that recording Using This recorder cannot make recordings on CD-R Our company takes failure due to power no responsibility outages, for defective Notes for recording discs, Disc types and care of your discs. recording formats, modes, settings This recorder discs: play five different kinds of DVD pre-recorded DVD-Video discs, DVD-RW, can DVD-R, DVD+RW and DVD+R discs. The disc format DVD-R, DVD+R, DVD+RW discs is always "Video for format"---the This means same as that once pre-recorded DVD-Video discs. finalized, you can play a DVD- R, DVD+R, or DVD+RW in a regular DVD player. By default, the DVD-RW disc format is Video format, though you can change this to Video Recording (VR) format, if required. (Reinitializing the disc will erase the contents of the The disc.) recording mode is closely related to the disc format. If the disc format is Video then the recording format is Video Video mode mode is VR Recording format, mode; if the disc mode, then the recording mode is for DVD-Video, which is not recordable, and so does not have modes recording mode). a fixed for them recording (which disc) are the record settings. These can be changed as required for each recording and determine the picture quality and how much space recording will take up on the disc. are The recording recording whole not exact because are variable bit-rate video the last title recorded The Delete Title menu on the disc. in the Title List option hides the only title, it does (except for the last recorded title DVD-RW disc in Video Overwrite recording (Original) actually erase the recording not the title from the disc and increase time available the times shown uses compression. This means that the exact recording time will depend on the material being recorded. When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. If you record still pictures or audio only, the recording time may be longer. The displayed times for recording and time remaining may not always add up to exactly the length of the disc. The recording time available may decrease if you heavily edit a disc. If using a DVD-RW disc, make sure you change the recording format (Video mode or VR mode) before you record anything on the disc. See page 20 (Disc Format) for how to do this. When using a DVD-R or DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before you start a recording session, check the amount of recording time left on the disc. When using a DVD-RW disc in Video mode, recording time available will only increase if you erase (except Within the maximum of a continuously. the recorder or damage to the Recorder. Fingerprints and small scratches on a disc can affect playback and/or recording performance. Please take proper be recorded or CD-RW discs. and the HDD allows you to record 12 hours Notes: can the HDD is 255. on on a mode). is available using DVD+RW discs. When About HDD recording Recording to the internal hard disk drive (HDD) is basically similar to recording to a VR mode DVD-RW disc. You have the full choice of recording quality options, including the manual mode, and of course can record, erase and re-record as many times as you like. The capacity of the hard disk drive means that you can store many hours of video on it, even in the higher quality recording modes. To help you organize the contents, the HDD is divided into ten you genre. You can name and use these genres as you like---for example, you might have a genre for movies, another for TV shows, and one for camcorder recordings. using a DVD+R/RW, the recorder will execute Menu-making operation to update the new title and editing when removing the disc from the recorder the or turn off the recorder. So you must after selecting the recorder's remove operation mode. Recording There XP are four time and picture quality preset recording quality modes: Highest quality setting, gives about recording time on a DVD (4.7GB). SP Default quality, sufficient for most applications, gives about 2 hours of recording time on a DVD (4.7GB). LP Slightly lower video quality, gives about 4 hour of recording time on a DVD disc (4.7GB). EP Lowest video quality, gives about 6 hour of recording time on a DVD (4.7GB). You may see a fragmented picture during playing -- 1 hour of -- -- -- back the contents recorded in EP mode 34 the disc mode to DVD . Timeshift Do not miss Clip HDD a scene from live broadcast. If the a You telephone rings while you are watching your favorite live broadcast, just press "TIMESHIFT" and "PAUSE" before answering the phone. The timeshift function will 1. later viewing. phone call or 2. viewing interruption, press or "SCAN" to watch the program. Press "STOP" to return to the live broadcast. can on During Timeshift, use pause step, search and slow-motion to find the starting point. Press REC at the Progress Progress starting point of the section you of the edit is indicated in red on the Bar. HDD 3. store a program in the HDD storage cache temporarily. 4. Progress shown below. watching a TV program. display appears on the screen as The Progress Bar changes to timeshift Use pause the step, search and slow-motion to find ending point. Press REC at the ending point of the section you want to record. Press TIMESHIFT while The to store the program (Pause, Live TV/Playback) Operation You during Timeshift (Hard Disk Drive). want to record. "PLAY" Timeshift HDD edit can the HDD be activated and the broadcast is then recorded for After the Record Normal Bar 5. playback Repeat steps Records of icon after 5 seconds. a continues. 1 and 4 to make several Clip program. 12 6. Press STOP to stop Timeshift. Confirm message will appear. 34 5 Indicates 2. Indicates current Timeshift 3. Indicates Timeshift start time. playback 7. mode. 4. Indicates Timeshift 5. Indicates the time that is position. elapsed Selected sections time. one during displayed on the Or, Recording screen. recorded are on the HDD. If you want to stop Clip recording, press the STOP button. If you press POWER to stop Clip recording, hour from Timeshift the program may not be recorded on the HDD. Clip records cannot be made for sections lasting Tips: can use then press ENTER. [Yes] Notes: start time. You Use b / B to select press STOP again. The current broadcast is 1. trick play less than 5 seconds. functions timeshift. Refer to pages 23-26. You can edit the cached (Slow, Scan, etc.) Playback Operation on Timeshift to clip during retain the program on the HDD. Refer to Record on the right. Jump 1. Clip to Start or End Press ENTER during during Timeshift timeshift. The menu will appear. 2. Press b and beginning Notes: Press B and There is not free space on the HDD, the oldest timeshift section of the cache will be incrementally playback starts from the very of the timeshift. jumps to the very end of the timeshift then goes to pause mode. deleted. If button is pressed stop automatically. no for 6 hours, the Timeshift will Marker Search in Timeshift mode You can mark at the desired one in Timeshift mode. Press MARKER point during To Exit the Timeshift 1. Press STOP to exit Timeshift function. 2. Confirm message will appear. Use b / B to select [Yes] then press ENTER. The current broadcast is displayed on the screen. Timeshift. Press SEARCH to recall the marked scene. 35 Basic Recording from a 1. Follow the instructions below to record Recording starts disc is full or To Pause the TV TV program. and continues until the a immediately recording. you stop the recordable disc for DVD a recording. watching The HOME menu appears. 2. Select [TV] option. 3. Select [TV HDD] or [TV DVD] option then press to pause recording. recording, press TV program while one another 1. Press TV/DVD to select the TV mode 2. recording. The TV indicator appears. Using the TV, select the channel to be Press HOME. 1. (X) 2. When you want to continue PAUSE/STEP (X). To record Note: You must load Recording Press PAUSE/STEP Instant Timer during viewed. Recording ENTER. Also make sure that the TV input Instant Timer Recording allows you to make a recording easily of a preset length without using is set to this recorder. If you load a completely blank disc, the recorder takes a short while to initialize the disc. Set 4. recording mode as necessary by pressing MODE repeatedly. (XP, SP, LP, EP) a REC Use PR/CH 5. (+/-) buttons to select the TV channel to record. the program timer. Follow steps from TV). 1. a Press REC 2. time 1-5 as shown left (z) repeatedly (Basic Recording to select the recording length. Changing TV Audio Channel You can select the audio channel by pressing (language) to during viewing TV program. channel is displayed on-screen. AUDIO current audio Stereo or mono Stereo → → The Recording starts after the first press. Each subsequent press increases the recording time within free space (maximum 240 minutes). The recording time is displayed on the TV screen. At the end of the recording, the recorder will stop recording and shut off. broadcast: → Right Mono → broadcast: Bilingual Main Left listen Sub → Main+Sub For TV recording with bilingual, set audio channel [TV Rec Audio] in sub-menu of the Setup (see page 20). from the menu If the sound is of poor quality when set to Stereo, you can often improve it by changing to Mono (Left or Right). record either NICAM can audio. If the NICAM setting (page 16) or regular is set to then if the broadcast is NICAM, the audio automatically changes to NICAM and you non- screen for a Time to check the automatically recording time. The return to the TV moment. display window. time Recording Time be extended recording anytime by pressing REC (z). Each subsequent press increases the recording within free space (maximum 240 minutes). can time Caution program. Press REC (z) Recording will start. (The the display window.) Recording the disc REC indicator lights continues until you press STOP or HDD is full. a fixed Recording Press STOP If the recorder is once. To record for 36 will The NICAM sound distortion occurs, due to poor reception, you can switch off NICAM setting of the 7. recalled To Extend the NICAM, the regular audio is always recorded. If Timer Recording once (z) setting Auto, can record the NICAM audio. If the broadcast is or the Press REC Also, remaining time of recording is shown in the This recorder 6. Checking (x) to on length right. of time, stop recording. see in failure) will be lost. (x) Instant unplugged (or there is a power recording, the recording while the recorder is Timer 2. Recording This recorder can be programmed to record up to 16 programs within a period of 1 month. For unattended recording, the timer needs to know the channels to be recorded, the and starting ending Enter the necessary information for your timer recording(s). b / B (left/right) move the cursor left/right (up/down) change the setting at the current cursor position Press RETURN (O) to exit the Timer Record time. Note: If you -- menu. use a blank disc for timer completely recording, Press ENTER after you must format the disc before starting timer recording. (Refer to "Disc Format" on page 20.) 1. -- v / V Press TIMER REC to 3. Press TIMER REC. The Timer Record in all the program Set a display Timer Record List. recording mode as necessary by pressing repeatedly. (XP, SP, LP, EP) REC MODE will appear. menu filling information. 4. Press ENTER, the program will be memorized by the recorder. To check the programming, will appear. Check field's "Rec. OK" indicates that the timer [Media] DVD). [PR] one (You Choose Choose a a media to record (HDD memorized program number, or inputs from which to record. cannot select DV [Date] Choose [Start Time] [End Time] input.) date up to 1 month in advance. a Set the start time. Set the end time. Choose [Repeat] Daily (Monday - a desired Friday), or repeat (Once, Weekly). The PDC [PDC] system automatically adjusts recording time so that even if a program is not running to schedule, you won't miss it. For PDC to work properly, you must input the the 5. Press RETURN 6. Make is programmed (O) to exit the Timer Record List. that you load a recordable disc for DVD and press POWER to switch your unit to sure recording Standby. Notes: The timer indicator lights in the display window standby with the timer displayed while the [Power Save Recording when the recorder is in active. (Nothing is ON.) For TV recording with bilingual, set audio channel from the [TV Rec Audio] in sub-menu of the Setup menu (see page 20). Mode] is You must press STOP to stop the timer recording. If you set a timer recording to record to DVD but correct announced time and date of the there isn't program you want to record. Note that PDC may not work with every station. the a recordable DVD loaded at the time of recording, the Recovery Recording feature will automatically record the program to the HDD for you. Notes: Stations that the Timer Record List recording correctly. or of the external on the Timer Record List use PDC typically include PDC guide pages. pages when setting a information in the teletext TV Please refer to these timer recording. using PDC, there may be instances where the beginning of the program is not When recorded. 37 Timer Recording with VIDEO Plus+ System This 3. You can change the information as required using b/B/v/V(Media,PDC,etc.) Refer to "Timer Recording" on previous page. 4. Choose 5. Press system makes programming timer recordings simple. Most TV guides publish VIDEO Plus+ programming numbers with their program details.If you want to make a timer recording of a program, you just input the corresponding VIDEO Plus+ programming number. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it's a once-only recording, or a regular recording. Up to 16 timer programs can be stored in the very record mode a ENTER, To check the programming, will appear. Check field's "Rec. OK" indicates that the timer trademarks of Gemstar The VIDEO Plus+ are system is manufactured under license from Gemstar 1. registered Development Corporation. Development Corporation. menu will appear. Press VIDEO Plus+ button [Number] again to exit the Enter the VIDEO Plus+ menu. programming number. 2. Use the number buttons then press ENTER to programming number. enter the VIDEO Plus+ To check the menu programming, the Timer Record will appear. If you make a mistake before pressing ENTER, press CLEAR repeatedly to delete password numbers one by one then correct it. 38 EP). by on the Timer Record List the Timer Record List recording is programmed correctly. 6. Press RETURN (O) to exit the Timer Record menu. 7. Make that you load a recordable disc for DVD and press POWER to switch your unit to sure recording Standby. Press VIDEO Plus+ button. The VIDEO Plus+ or the recorder. recorder. VIDEO Plus+ and PlusCode (XP, SP, LP, the program will be memorized Checking Timer If two Recording or more timer programs Details The earlier program takes When the earlier program Programming program starts. If two programs is turned can be checked whenever the recorder Press TIMER REC twice. on. Use v / V to select timer a overlap: priority. finishes, the later set to start at are exactly the same time, the program entered first takes priority. recording. If the disc is damaged, complete successfully. Press ENTER to edit the selected program. Timer Record menu appears. the recording In this Check field shows "Rec. OK", it may Press CLEAR to delete the selected program may not case even though the not be. from the Timer Record List. Recording Input Recording You a can from from External record from camcorder or Make Components component, such as to any of the inputs. that the sure external an VCR, connected recorder's external 1. External an from is connected component you properly want to record to the recorder. See page 13-14. Canceling Timer a 2. Recording Choose using You can clear a timer setting anytime before the recording actually starts. Usev/Vtoselectaprogramyouwanttoeraseon the Timer Recorder List. If you want to program, press CLEAR. erase 3. a media HOME Press AV/INPUT input (TV HDD or TV DVD) (see page 15). to record menu. repeatedly to select the external Tuner: Built-in tuner the AV1: EURO AV1 AUDIO VIDEO mounted back After a Timer a timer Recording recording has in Progress started, you can Even panel on back panel (VIDEO, AUDIO (L/R), S-VIDEO IN) mounted on front panel DV: DV IN mounted on front panel 4. on no the timer is set, the recorder will not disc loaded and there is not free space 5. the HDD. A non-recordable disc is loaded and there is not free space on is set to in the on Setup or the HDD. Timer A or REC indicator lights continues until you press STOP in (x) a fixed Recording" on length of time, see "Instant page 36. on. already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R, DVD+RW) recorded on the disc and there are already 255 titles recorded on the HDD. are You cannot enter as necessary by repeatedly. (XP, SP, LP, the disc is full. To record for (see There mode (z) once. Recording will start. (The the display window.) Recording [ON] and there is not free space page 21). Power is turned recording REC MODE Press REC the HDD. [Disc Protect] option menu Select the pressing EP) record when: There is back AV4: AV IN 4 Recording Troubleshooting though on AV3: AV IN 3 mounted still cancel the program. Press POWER. Timer on panel AV2: EURO A/V2 DECODER mounted Stopping Recording to record from. a timer program when: recording is already underway. you're trying to set has already passed. There are already 16 timer programs set. 6. Press STOP (x) to stop recording. Note: If your source is copy-protected using CopyGuard, you will not be able to record it using this recorder. See Copyright on page 50 for more details. The time 39 from DV Recording Before DV You 1. Input dubbing 2. DV-equipped camcorder to this using single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible. can connect recorder Select menu a a You cannot connect at Make more than one 3. 16-bit/48kHz, or DV input is choose between Audio 1 HOME Input you require. (original audio) as (overdubbed audio). is set from the sub-menu of the 4. Setup Audio" on [DV Rec menu. Audio] in See "DV page 20 for more Press AV/INPUT repeatedly to select the DV input. display window and on the TV DV appears in the screen. 5. Find the place on the recording want to the camcorder tape that you to start from. For best results, pause playback at the which you want to record. twin stereo tracks of 12can point from on your camcorder, you can use this recorder's remote to control the camcorder Depending using 6. the Press REC STOP, PLAY and PAUSE functions. (z) once to start recording. automatically stopped if the recorder detects no signal. You can pause or stop the recording by pressing PAUSE/STEP (X) or STOP (x). Recording unrecorded section of source can Recording only record one stereo audio track. Set [DV Rec Audio] option to [Audio 1] or [Audio 2] as required (see page 20). Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz). Picture disturbance on the recording may occur if the source component pauses playback or plays an the [TV DVD] option on the (see page 15). or information. equipment connected via the DV IN jack (including two recorders). It may not always be possible to control the connected camcorder via the DV IN jack. Digital camcorders can usually record audio as bit/32kHz. This recorder [TV HDD] then press ENTER. and Audio 2 DV camcorder You cannot control this recorder from external stereo your digital camcorder is connected to DV IN jack. See page 14. panel Check that the DV audio You time to this recorder. a sure the front tape, or if the power fails in component, or the DV cable becomes disconnected. is You cannot control the camcorder from this Recording You can record from the DV IN Using from jack on a a remote control Digital Camcorder In Video digital camcorder connected panel of this recorder. to can recording, make sure DV IN jack is set up (see Before that the audio the page input If you cannot get a picture and/or audio DV IN jack, check the bullet points: 20). Make signal using component connected to remotely from the DV IN jack. 40 a while cable, one. properly connected. equipment then off the connected the audio on input. the connected be able to control it a the Note: Depending a through on. Try switching You cannot record date and time information from DV cassette. the DV cable is switch back this recorder's remote. If you connect a second recorder using a DV you cannot control the second DVD from this sure Try switching must be DVC-SD format. Some camcorders cannot be controlled You cannot control this unit for Troubleshooting for Tips: source on screen control both the camcorder and this recorder. The may remain displayed after recording stops. the front the recorder's remote, you during recording. mode, the final frame of the recording with this recorder. using camcorder, you may not the remote control supplied Simultaneous recording and playback another title Playback Playback during recording and recording for both DVD and built in hard (HDD) are completely independent. For disk drive you can record to either the DVD or HDD and play back video from the other source at the example, source same time. 1. Start 2. Press HOME to recording. display the Home Menu screen. Usethev/V/b/BandENTERbuttonsto 3. select a different media type that you want to play back. Start 4. The Playback. recording will continue while playing back the media from the other mode. Notes: You can't use recording while simultaneous You cannot edit programs recording and playback. Time playback and copying. during simultaneous Slip You can play back simultaneously. 1. Start HDD 2. Press PLAY the current title in recording recording. (N). playback starts and the recording will continue while playing back. YoucanusePAUSE(X)andSCAN(m/M) buttons for pause, scan, slow-motion during playback. The 3. Press STOP (x). playback will stop recording position. The then returns to the current Notes: Playback cannot be started recording starts. until 15 seconds after This function does not work in DVD recording mode. 41 123 Editing Title List and Chapter 45 67 List Menu Overview Using the Title List menu you can edit video content. editing features available in the Title List menu depend on whether you are editing video on DVD, or the HDD, and whether you're editing Original content, or a Playlist. The There You are can two ways to edit VR mode DVD-RW discs. edit the Original content of the disc, directly you can create and edit a Playlist. The Playlist doesn't actually change any of the content on the disc, but just controls how the content is played back. or Editing material recorded on the HDD is similar to editing the Original content of a VR mode DVD-RW, with similar commands for erasing and naming titles, as well as fine control over the content of chapters 1. Note: if you display the Title List menu for of the titles may appear with a mark. These titles were recorded with a Line Input setting During recording, HDD, some different to the current During recording, 1. setting of the recorder. these titles cannot be played. Press MENU/LIST to Playback You should be display the Title List menu. stopped when you do this. also access it using HOME menu, [MOVIE] option then select [HDD] or [DVD] option and press ENTER. can select When selecting titles, use the v / V buttons to display the previous/next page if there are more than six titles. If you are editing a VR mode disc, press MENU/LIST to switch between Original and Playlist - - menu. On the left side of the The main part of the screen are screen the menu options. shows thumbnails of the titles (or chapter) on the DVD or HDD. You can change these thumbnails using the THUMBNAIL button---see Changing Title Thumbnails on page 43. Press DISPLAY to title on display the Title List the information of selected menu. selecting a title or chapter on the Title List or Chapter List menu, then press ENTER. The menu options appears on the left side of the menu. Use v / V to select a option then press ENTER to confirm your selection. 2. To exit the Title List menu, press RETURN repeatedly. 42 [Undo]/[Redo] (page 47) 2. mode, free space, and time progress bar. Current media selected title. 4. Currently 5. Thumbnail 6. Shows the selected title number and total number of titles. 7. (O) Un-do/Re-do the last deletion/ action. Indicates the record elapsed 3. After options: To display menu option, select a chapter then press ENTER. The options displayed differ depending on the disc type. or [Combine] Combines two titles or chapters into one (page 47, 48). [Delete] Deletes the title or chapter. (page 45) [Delete Part] Deletes a part of the Title (page 45). [Divide] Divides a title into two (page 48). [Dubbing] Copies the title to another media. (page 51) [Full Play] Starts playback of the selected title including the hidden chapters. [Hide (Show)] Hides (or Shows) the selected title or chapter. (page 49) [Move] Moves a chapter on the Chapter List-Playlist menu to a position on the menu. (page 49) [Play] Start playback of the selected title or chapter. The hidden titles and chapters on the DVD+R/RW cannot be play back. [Playlist Add] Adds the title or chapter to the Playlist. (page 44) [Protect] Protects accidental recording, editing or deleting of the title. (page 49) [Rename (Title Name)] Edits the title name. (page 46) [Search] [Chapter]; Displays Chapter List of the Title. [Time]; Search time for you want start point of the title. (page 46) [Sort] Lists the programs on the Title List menu by Date, Title, or Category. (page 47) [Title] Displays Title List of the chapter. within titles for DVD disc. the Menu title Shows the title name, recorded recording length. date, and HDD, VR Mode: Original and Adding Chapter Markers Playlist Editing HDD -RW VR Titles, Chapters and Parts You Titles in the disc's chapter content contain original one or chapters. When you insert a disc's title into the Playlist, all the chapters within that title also appear. In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu you can add or delete parts. Adding a chapter or title to the Playlist creates a new title made up of a section (ie., chapter) of an Original title. Deleting a part removes part of a title from the Original or Playlist menu. can create +RW chapters +R within marks at the desired a title by inserting points. more Caution When editing using functions, the the chapter not HDD on DVD like editing a video a DVD, you edit by making 'Playlist' what to play and when to play it. On playback, the Recorder plays the disc according to the Playlist. screen. -RW VR +RW +R a of 'Original' and 'Playlist' -RW VR Throughout this manual, you will often see the words Original and Playlist to refer to the actual content and the edited version. content refers to what's actually is from the from within title. picture the The still Original one picture Playlist or currently displayed that appears in the Title List menu. that you choose appears in both the menu. Tip: You About word the TV you Title Thumbnails Press THUMBNAIL to make the the edits. With on marker icon appears displayed in the Title List menu represented by a thumbnail picture taken start of that title or chapter. If you prefer, select a different still picture No. When you edit a video tape you need one video deck to play the original tape and another to record Original: playing back, at the point chapter, press CHP ADD. Each title a malfunction. a A or a new start and end frames may not be momentary pause between edits. This is editing tape? During recording want to start Changing Delete, Add and Move exactly as set in the start and end point display. During Playlist playback, you may notice a Is Note: Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial Setup menu (see "Auto Chapter" on page 20). also change the thumbnail picture of the title Chapter List menu. Select a chapter on the Chapter List menu then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is changed. on can the Edit ng recorded the disc. Playlist: disc --- content refers to the edited version of the how the Original content is to be played. 43 Making a New Adding Additional Title/Chapters to the Playlist -RW Playlist -RW VR VR Use this function to add You the an Original title or chapter to Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don't need later see Deleting an Original or Playlist title/chapter on page 45). Playlist 1. can add title Choose menu or Playlist, if you add more chapter markers to the Original these are not automatically copied over into the Playlist You can add up to 999 only title/chapter Choose Playlist, a to the title or then press ENTER. menu options on appears the left side of the screen. later, chapters to one disc If you chapter of a title, use the Adding Playlist on this page. . a title or chapter on the Title List-Original Chapter List-Original menu to put into the then press ENTER. menu options appears on the left side of the 2. menu. 2. a a menu or The to title. want to add 1. The Original title or chapter to add if it is already registered. chapter on the Title List-Original Chapter List-Original menu to put into the a --- The title appears in the Playlist complete with the chapter markers that appear in the Original. However, an even Use v / V to select options Use v / V to select [Playlist Add] option then press ENTER. 3. Choose [Playlist Add] from menu then press ENTER. a registered Title List-Playlist to insert a title that is or already chapter, then press ENTER. 4. Repeat steps 1-3 the Playlist. to add additional title or chapter on You can view the added List-Playlist 3. Select The on the Chapter then press ENTER. title appears in the updated Playlist. All of the title are added to the Playlist. [New Playlist] new chapters 5. Press RETURN back to the Title 44 chapters menu. (O) to exit, List-Original or MENU/LIST to go menu. Deleting an Original Title/Chapter or When you from the erase a title or chapter Playlist You menu, you only remove it from the Playlist; title/chapter remains in the Original menu. If you choose to delete a title or Deleting chapter Playlist can a delete a Part HDD -RW VR part which you do not want in the title. the 1. Useb/B/v/Vtochooseatitleyouwantto delete from the The Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist. 2. on the Title List options appears then press ENTER. the left side of the menu. menu on Select [Delete Part] option then press ENTER. Edit (Delete Part) menu appears on the TV screen. [Start Point] icon is highlighted. Edit Example: (Delete Part) (HDD) Note: It may not be possible to delete than 5 seconds long. 1. chapters that are less Useb/B/v/Vtochooseachapterortitleyou on the Title List or Chapter List want to delete menu The then press ENTER. menu options appears on the left side of the screen. Select 2. 3. [Delete] option from the options on the menu. 4. Example: Title List Starts and playback use slow-motion to find the (HDD) Press ENTER at the pause step, search and starting point. starting point of the section you want to delete. 'End Point' icon is highlighted. The 5. 6. part is indicated Use pause the ending step, on the Bar. point. Press ENTER at the ending point you want to delete. You can cancel the selected select Progress search and slow-motion to find [Cancel] point, of the section use v / V to icon then press ENTER. Tip: Edit ng With HDD Select Press ENTER to confirm. 3. The confirm message for deleting ENTER, then repeat steps will appear. Use b / B to select [Yes] then press ENTER. chapter or title is deleted. After pressing ENTER, the new, updated menu displayed. 4. 7. The selected 5. Repeat steps 1 - is 4 to continue to delete from the menu. (O) repeatedly to exit the 3-6. edit, select [Done] icon then press The confirm message for deleting will appear. Use b / B to select [Yes] then press ENTER. The selected part is deleted from the title and Title menu appears. menu. Notes: Note: When DVD+RW is changed If more titles If you finish to ENTER. List Press RETURN 6. recordings, you can delete additional part. [Next Part] icon on the menu then press recording, name to 'Deleted Title'. than two titles are the deleted title's are combined into repeatedly deleted, It may not be possible to delete than 3 seconds long. parts that are less the one. When you are deleting a title or chapter, only the last one on DVD+RW increases remaining recording time. 45 Naming You can Time Search Title Playlist titles be up to 32 characters and long. Original can name Names 1. a Choose the title you want to menu, then press ENTER. The options menu appears independently. +RW You 1. Use v/V to select Keyboard 3. point of the title. [Rename (Title Name)] option Useb/B/v/VtochooseatitleontheTitleList The 2. then press ENTER. appears on the left side of the options Select [Time] option [Search] then press ENTER. menu -RW Video +R select start menu the left side of the menu. 2. can -RW VR the Title List name on on -R HDD menu Example: appears. then press ENTER. appears Title List menu. on the TV screen. (HDD) Enteranameforthetitle.Useb/B/v/Vto select a character then press ENTER to confirm your selection. Use MENU/LIST button to change keyboard type. Current OK: Select to finish. picture Cancel: Cancels all entered characters. Inserts a space at the cursor position. Delete: Deletes the previous character at the Space: cursor End time position. b / B: Moves cursor to left or right. Start time Tip: Remote control buttons for PLAY X x (N): Inserts a (STOP), a name cursor . / >: Moves the after character at (0-9): to left or cursor corresponding position. Tip: can add the genre only for HDD title 4. Choose OK then press ENTER to fix the and return to the previous menu screen. 5. Press RETURN (O) repeatedly name. name to exit the menu. Notes: Names can be up to 32 characters long. For discs formatted on a different recorder, you will see only a limited character set. When recording on discs, the entered player only 46 DVD-R, DVD+R name is displayed after finalization. or DVD+RW on Use b / B to find the The 4. right. Enters the character at the You 3. point point you want to start. increase 1 minute step. If you press and hold b / B then the 5 minute step. previous position. cursor point position. cursor CLEAR: Deletes the character at the Numbers Selected entering space at the (PAUSE/STEP): Deletes the cursor position. Selected time the DVD Press ENTER to start selected point. point increase Sort Combining HDD This function allows you to organized by Date, Title, HDD menu. So you can or access show Category on listings the Title List- find title you want to watch easily. Choose any title press ENTER. 1. The menu on options the Title List-HDD menu, then appears on HDD Use this function to combine two HDD titles into Use v/V to select Sort options This function is not available if there is If there [Sort] option only one titles within the HDD. the left side of the are more than 60 titles on the HDD, you cannot combine the titles. then press ENTER. appears. adjacent Original- one. Notes: menu. 2. Two Titles Into One 1. On the Title List-HDD menu, select the first title of the two titles you want to combine then press ENTER. The menu options appears on the left side of the screen. 2. Select [Combine] option then press ENTER. Use v/V to select [Date], [Title] or [Category] option then press ENTER. After pressing ENTER, the sorted menu is displayed. 3. Undoing/Redoing Deletion the Last 3. If you make a mistake while deleting, you can undo it. There is one level of undo (in other words, you can undo the last one deletion you Select the second title of the two titles you want to combine then press ENTER. Confirm message appears. -RW VR made). 4. Use b / B to select [Yes] then press ENTER. pressing ENTER, the updated menu is displayed. After Edit ng Use v / V to select [Undo] option then press ENTER. It doesn't matter whether you are currently in the menu screen; the last deletion is undone. Notes: You can't undo a recording. anything after ejecting the disc from the recorder or switching the recorder into standby mode. You can still undo a deletion even after exiting the menu display. You can't undo Tip: You can redo the last undo action using the [Redo] option. 47 Divide One Titles Into Two HDD One +RW Use this command to 1. split a title up into two On the Title List menu, select divide then press ENTER. The Combining menu options appears on a new titles. title you want to the left side of the 2. Select Example: Title List Original chapters +RW into Into +R adjacent Playlist or one. Note: This function is not available if there is 1. [Divide] option. -RW VR Chapters Use this function to combine two chapter screen. HDD Two On the chapter (HDD) only one within the title. Chapter List menu, select the second chapters you want to combine of the two then press ENTER The menu options appears on the left side of the screen. 2. Use v / V to select [Combine] option. The combine indicator appears between the two chapters you want to combine. 3. Press ENTER. Edit (Divide) highlighted. Current menu appears. [Divide] option is picture 3. The first title's thumbnail The second title's thumbnail 4. Use play, pause step, search and slow-motion point you want to divide the title. to find the 5. Select [Divide] option then press ENTER at the point. To reset the point, select [Cancel] option Repeat from step 3. then press ENTER. 6. Choose [Done] option dividing point. then press ENTER to fix the The title is divided into two new titles. It take up to 4 minutes to divide. Note: You cannot select 48 dividing point less than 3 seconds. Press ENTER. Moving a Playlist Chapter -RW VR Use this function to re-arrange the playing order of Playlist chapters on the Title List-Playlist menu. Tip If you select a hidden chapter or title on the Title List or Chapter List menu, you can 'show' it by choosing [Show] option on the menu. After doing that, you are able to Note: This function is not available if there is only one see Protect chapter. +RW 1. Select 2. Press ENTER. The a chapter menu the on options Chapter List-Playlist on appears menu. the left side of the Use v / V to select [Move] option from Playlist 2. Hide a You skip playing chapters can Chapter/Title or +RW +R titles without deleting from the disc. 1. Use vVbBto choose to hide +R on the Title List a or chapter Chapter title you want List menu, then -RW VR protect against accidental or of the title. deleting Press MENU/LIST to display Use vVbBto choose Options Useb/B/v/Vtochoosetheplaceyouwantto move the chapter to then press ENTER. After pressing ENTER, the updated menu is displayed. title. a the Title List menu. title you want to protect then press ENTER. 3. 4. or Title recording, editing then press ENTER. options a chapter Use this function to 1. menu. 3. the 4. Select appear [Protect] on the left side of the from the screen. options. Press ENTER to confirm. The lock mark will appears on the title's thumbnail. Tip If you select a title that has already been protected on the Title List menu, you can 'unprotect' it by choosing [Protect] option from the Title List menu options. After doing that, you can edit and delete the title. Edit ng or press ENTER. Options 2. Select appear the left side of the screen. [Hide] option. Example: 3. on Title List (DVD+RW) Press ENTER to confirm. The chapter's or title's thumbnail will dim. 49 authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited. Dubbing Before Use the CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY Dubbing COMPATIBLE WITH THIS PRODUCT AND MAY copying features of this recorder to: important recordings stored on the CAUSE ARTIFACTS TO BE DISPLAYED IN THE Back up a DVD. Make a Transfer video from a recording on the HDD to The method of editing. is to use the other way around. If the title's length is less than 5 seconds, available. (from HDD to DVD) Restrictions on the dubbing copying Some video material is copy-once material cannot be copied to HDD protected: or Such DVD. You can identify copy-once protected material during playback by displaying disc information on-screen. NTSC format analog or the DV correctly with this recorder. Video signals in SECAM format (from the built-in TV tuner or from the analog inputs) are recorded in PAL inputs from the signals is not recorded format. What is 'CPRM'? CPRM is protection system (with scramble system) only allowing the recording of 'copy once' a copy broadcast programs. CPRM stands for Content Protection for Recordable Media. CPRM recordings can only be made discs formatted in VR mode or on DVD-RW discs, and CPRM recordings can only be played on players specifically compatible with CPRM. that are CUSTOMER SERVICE CENTER. copying (Maximum 12x) Copying between DVD and HDD is a completely digital process and therefore involves no loss of quality in the audio or video. This means that you can transfer back and forth without having to worry about the quality getting worse with each copy 'generation'. It also means that copying can be carried out at the maximum speed possible. When copying from HDD to DVD, the speed of copying depends on the recording mode and the kind of DVD disc you're using. Minimum fast copying times The table below shows the minimum HDD to DVD copying time for 2 hours of video recorded with SP mode. Disc Disc Type Speed Copying Time (Record Speed) DVD-R / DVD+R 16x DVD-R / DVD+R / DVD+RW 8x 8 min. DVD+R DL 8x 13 min. (4x) DVD-RW 6x 12 min. (6x) DVD-R / DVD+R 4x 13 min. (4x) DVD+R / DVD+RW / DVD+R DL DVD-R / DVD-RW 6.5 min. (12x) (8x) 21 min. 2.4x (2.4x) 25 min. 2x (2x) Notes: Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. This product incorporates copyright protection technology that is protected by method claims of patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise 50 625p RECORDER, PLEASE CONTACT OUR DVD-RW / DVD+RW Copyright certain U.S. HDD/DVD Fast Note: is not THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL the One simplest copying Touch Copy feature. Using this you can very simply copy the title that's currently playing from HDD to or PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF DVD to the HDD for Transfer edited video from the HDD to DVD. DVD, PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE DVD copy of a in another player. play HDD to All times in the above table are approximate. Actual copy speed varies with the being recorded. part of the disc There may be cases where even 4x/6x/8x/16x compatible discs do not copy at full speed. Fast copying initialized on may not be possible when another recorder. using disc Dubbing 1. from HDD to DVD On the Title List-HDD menu, select a Dubbing title you want 1. to dub then press ENTER. The menu options on appears the left side of the Use v / V to select [Dubbing] option Fast), To information on Fast stop dubbing press ENTER. highlighted, at any other time, press recording depending on time of [Fast] data size of in source. Stopping dubbing [Fast] recording and to that point will be lost. and mode could be varied mode will cancel the The (XP, SP, LP, EP, 4. When [Start] icon Dubbing starts. 5. To stop dubbing is highlighted, at any other press ENTER. time, press (x). Notes: The If the appears. Only available when copying VR mode disc (See page 50 for more information on copying.) STOP (x). Notes: [Fast] menu to HDD. Fast icon is [Start] Dubbing starts. STOP then press Fast), Fast: more copying. 5. [Dubbing] option Use b / B to select record mode or highlighted. Fast: See page 50 for When the left side of the then press V. 'Start' icon is highlighted. (XP, SP, LP, EP, then press V. 'Start' icon is 4. on appears. Use b / B to select record mode or Use v / V to select Dubbing menu 3. 3. appears title you want to ENTER. then press ENTER. Dubbing options a screen. 2. 2. On the Title List menu, select dub then press ENTER. Menu screen. from DVD to HDD partway through any data recorded up space on the disc is mode is not available. remaining title. not be Stopping dubbing in [Fast] mode partway through recording and any data recorded up to that point will be lost. will cancel the insufficient, the mode is not available for edited HDD title [Fast] Clip Recording Depending on the conditions of the recording equipment or the disc itself, the dubbing may capable. The recording time of [Fast] mode can take up to 19 Dub ing minutes. The [Fast] mode is not available for edited title the DVD-RW with VR recording on mode. 51 One Touch Copy (HDD to DVD) The One Touch Copy feature copies the currently playing title from the HDD to DVD. The whole title is copied, regardless of where in the title you start copying. The recorder copies at the maximum speed possible. For One Touch to Copy work, make sure that a recordable DVD disc is loaded. During HDD playback, press DUBBING to copy the current title to DVD. The on-screen display indicates that the title copied. Playback continues while copying. You cannot copy a the One Touch use title if any Copy is being function to part of the title is copy-once protected. One Touch One Touch Copy Copy (DVD from DVD to HDD to copies HDD) a single title to the HDD in real time. When you start copying, playback jumps back to the start of the title, then continues through to the end of the title, when recording automatically stops. The copy will be in the recording mode (XP, SP, LP, EP) that is currently set. During DVD playback, press made DUBBING to copy the current title to HDD. Playback starts title is from the again current title. The on-screen beginning of the display indicates that the being copied. Notes: Video CD cannot be The copying stops badly scratched or If some copied to HDD. when then recorder detects copy a protected part. part of the title being copied is copy- protected, copying will start, portions will not be copied. During Playlist title's but the playback, copy-protected One Touch Copy is not available. Tip: To 52 stop dubbing at any other time, press STOP (x). 2. Reference To overwrite a new video You can remove STOP +RW recording play will appear menu or stop mode. as shown below. Tip Additional Information Overwriting Recording Press TITLE in Title List on a the Title List menu by pressing (x). previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. Select 1. input you want to record source (TV channel, AV1-4, DV). Press MENU/LIST to 2. the Title List display menu. To 3. play back a press ENTER title, select the title you or PLAY want then (N). Playing Your Recordings on Other Players (Finalizing a Disc) Most regular DVD recorded in Video players play can Use vVbBto choose 3. a title you want to Check the manual that Press REC 4. Overwrite to start overwrite (z) recording recording. point starts from the start new (x) to stop the overwrite recording. title is created and updated menu is displayed. Notes: If the overwrite is longer of the current a protected title. recording than the title, the overwriting stops at the protected, starting point of the the title. If the selected title's seconds, the recording length Title List can 1. to play. 'fixes' the recordings and editings in place be played on a regular DVD computer equipped with a suitable DVD- that the disc so player or can ROM drive. Finalizing a Video mode disc creates a menu screen navigating the disc. The menu can be accessed by pressing MENU/LIST or TITLE. view the Title List player that is on displayed on the capable of playing DVD+RW menu DVD+R discs. Insert DVD+R To f i n alize a disc, refer to "Finalize" on page 21. Notes: Unfinalized DVD+RW is playable on regular DVD players. The edited contents of compatible on regular a DVD+RW disc is DVD players only after finalization. +R other DVD or displayed or Players menu other DVD Recorders You is less than 10 next title is overwritten. But if the next protected, overwriting stops. Viewing +RW not. player next title is overwritten. But if next title is title is with the other play or for This function is not available for length also of Finalizing Press STOP The came or can mode, finalized check what formats of discs it will the title. 5. players DVD-RW discs recorded in VR overwrite. finalized discs mode, finalized DVD+R DVD+RWs. A small number of DVD Any edited compatible contents of the DVD+R disc are Dub ing not regular DVD players. (Hide, chapter combine, added chapter mark, etc.) How long finalization takes depends on the type of on disc, how much is recorded number of titles on DVD+R DL disc can on the disc, and the the disc. take up to 30 minutes to finalize. or DVD+RW disc recorded already. 53 Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu. Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Codes Choose an area Area Code AF Area Code Area Code Area Code ET Malaysia MY Saudi Arabia SA FJ Maldives MV SN Finland FI Mexico MX France FR Monaco MC Senegal Singapore Slovak Republic BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Heard and McDonald Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA Hungary HU New Zealand NZ Sweden SE Chile CL India IN Switzerland CH CN Indonesia ID Nigeria Norway NG China NO Thailand TH Colombia CO Israel IL Oman OM CG Italy IT Pakistan PK Turkey Uganda TR Congo Costa Rica CR Jamaica JM Panama PA Ukraine UA Croatia HR JP United States US KE Paraguay Philippines PY CZ Japan Kenya PH Uruguay UY Denmark DK Kuwait KW Poland PL Uzbekistan UZ Ecuador EC LY Portugal PT Vietnam VN Egypt EG Libya Luxembourg LU Romania RO Zimbabwe ZW El Salvador SV Russian Federation RU Afghanistan Argentina AR Ethiopia Fiji Australia AU Austria AT Belgium Czech 54 code from this list. Republic SG SK UG Controlling Your TV with the Supplied Remote Control You can control the sound level, input power switch of your LG TV with the You can control your TV using You source, and supplied other TVs with the remote Controlling remote. can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. the buttons below. 1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV 2. (see the table below). Release TV POWER button. Code numbers of controllable TVs If more them than at one one code number is listed, try entering time until you find the a one that works with your TV. TV Control Buttons Manufacturer Code Number LG / GoldStar 1 Zenith 1,3,4 Samsung 6,7 (Default), Sony 8,9 Hitachi 4 2 Notes: Depending function on on your the TV, TV, some or even after all buttons may not the correct entering manufacturer code. By pressing You POWER Turn the TV AV/INPUT Switch the TV's can on or If you enter a new code number, the code number entered will be erased. previously off. input source between the TV and other input sources. PR/CH +/-- Scans up or down through memorized channels. VOL +/-- Adjust MUTE Temporarily press again When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. the volume of the TV. turns TV sound OFF, to restore. 55 Troubleshooting Check the following guide for the possible cause of a problem before contacting Cause Symptom Solution The power cord is disconnected. No power. Plug the power cord into the wall outlet No service. picture. securely. TV/DVD mode for the recorder is set Press TV/DVD to TV. repeatedly to choose DVD mode. TV indicator disappears in the display on the remote control window. The TV is not set to receive recorder Select the signal output. on The video cable is not connected Connect the video cable the TV appropriate video input the picture from the mode so recorder appears the TV on screen. securely. securely. No sound. The connected TV power is turned off. Turn The Select the correct connected with the equipment audio cable is not set to receive recorder signal output. The audio cables not connected are the TV. on input mode on the you can listen to the sound from the recorder. audio receiver so Connect the audio cable securely. securely. The playback picture is The power of the equipment connected with the audio cable is turned off. Turn The audio Replace connecting The disc is cord is damaged. the on equipment connected with the audio cable. it with new one. Clean the disc. dirty. poor. The recorder does not start No disc is inserted. Insert a disc. (Check that the disc display window is lit.) indicator in the playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type, color system, and regional code.) The disc is placed upside down. Place the disc with the side playback down. The disc is not placed within the guide. The picture from input is the dirty. The level is set. Rating The video Cancel the the from the external signal distorted Some channels are Those channels are recorder. The picture or sound of broadcasting channel is weak or missing. Aerial Camcorder Camcorder is off. image is not image via cables not stored in the are loose. Camcorder input or 56 TV DV IN to screen. tray guide. Rating function or change level. Connect the component your TV. Restore channels. See directly to "Program Edit" page 16. Tighten connections on or replace and cable. operate properly. recorder is not shown on rating Turn camcorder shown. A/V the disc You cannot connect via this recorder. on skipped over when using PR/CH (+/-). or on inside the Clean the disc. The disc is component is copy-protected. external Place the disc correctly The recorder's source is incorrect. Use AV/INPUT to select (AV1, AV2, DV, etc.) input channel Cause Symptom Cannot The disc play a disc using this recorded recorder on Some another Solution recorded in Video mode. was will not players play Finalize the disc. (page 21) No solution. even a finalized disc recorded in Video mode. player. The disc was recorded in VR The other player must be RW compatible in order to play it. mode, Discs recorded with copy-once material played on other players. No solution. The Use another disc. cannot be Cannot record not record or did blank space remaining The source protected. When setting When the protected recording possible. to record is trying recording channel, on recording programs that is not are you copy channel is tuned Timer the on disc is insufficient. successfully. the TV's to a own the source. Select the channel the recorder's on built-in TV tuner. tuner. Video mode You cannot record the Use disc, a VR mode formatted disc for copy-once material. are copy-once cannot be recorded. Clock in recorder is not set to correct Set clock to correct time. See "Auto time. Clock Set" or "Manual Clock Set" on page 17. Timer has been programmed Reprogram Recording" incorrectly. Timer record indicator appear after Stereo Audio Record and/or Playback TV is not is not light does programming timer. not Reprogram page 37. Timer. No solution. Stereo-compatible. Broadcast program is not in stereo present. Timer. See "Timer on No solution. format. The recorder A/V Out jacks are jacks. Make A/V connections. Stereo is not connected to TV A/V In available only via A/V output from the recorder. The recorder Audio/Video Out is not Select AUX selected for input. viewing at the TV. or A/V source as TV The recorder's TV audio channel is Set TV audio channel mode to Stereo. set to See mono. "Changing TV audio channel" on page 36. The remote control The remote control is not does not work the remote properly. sensor pointed Point the remote control at the remote at of the recorder. sensor of the recorder. The remote control is too far from the Operate recorder. 7m. There is an obstacle in the path of the the remote control within Remove the obstacle. remote control and the recorder. The batteries in the remote control are Resetting the recorder If you observe any of the The unit is on or following symptoms... but the power will not turn off. The front The plugged in, Replace the batteries with new ones. exhausted. panel display is not working. recorder is not operating normally. ...you can reset the recorder as follows: Refrnce Press and hold the POWER button for at least five seconds. This will force the unit to power off then turn the unit back on. Unplug the power plug it in and then cord, wait at least five seconds, again. 57 Specifications General Power AC Power 35W requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Television 200-240V, 50/60 Hz 430 X 54 X 275 4.1 mm (w x h x d) without foot kg 5˚C to 35˚C 5 % to 90 % system PAL Recording format PAL I, B/G, I/I, SECAM D/K, K1 color system Recording format DVD Video Recording Recordable media Recordable time Recording, DVD-VIDEO (80GB), DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable, DVD+Recordable (Double Layer) DVD (4.7GB): Approx. 1 hour (XP mode), 2 hours (SP mode), 4 hours (LP mode), 6 hours (EP mode) DVD+R DL (8.5GB): Approx. 3 hour (XP mode), 3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode), 10 hours 30 minutes (EP mode) HDD (80GB): Approx. 20 hours (XP mode), 40 hours (SP mode), 74 hours (LP mode), 111 hours (EP mode) HDD Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format 27MHz MPEG 2 (VBR support) 48kHz Dolby Digital Playback Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 DVD(PCM96kHz):8Hzto44kHz More than 100 dB (AUDIO OUT connector) Less than 0.008% (AUDIO OUT connector) More than 95 dB (AUDIO OUT connector) Hz to 20 kHz Inputs AERIAL IN Aerial input, 75 ohms Vp-p 75 ohms, sync negative, VIDEO IN 1.0 AUDIO IN 2.0 Vrms S-VIDEO IN 1.0 V DV IN more than 47 RCA jack x 2 / SCART kohms, RCA jack (L, R) 75 Ω, sync Mini DIN x 4-pin x 1 1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART (Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin (C)0.3V(p-p)75Ω (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 0.5 V (p-p), 75 Ω, RCA jack x 1 3 V (p-p), 75 Ω, Optical connector x 1 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 x 2 x 1 (Y) (p-p), negative, (C)0.3V(p-p)75Ω 4 pin (IEEE 1394 standard) x 2 2 / SCART x 2 Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT Audio output (digital audio) output (optical audio) Audio output (analog audio) Audio / SCART x Accessory: Scartcable.............................1 RFCoaxialCable................1 Remotecontrol..........................1 Batteries.......................2 Design 58 and specifications are subject to change without notice. 2 human touch Technology with the GUARANTEE LG Electronics U.K. Ltd. will 1. All 2. The dealer provide the following services in order to faulty components which fail due to defective manufacture period of 12 months from the original date of purchase. will be expedite replaced this Guarantee. free of charge for a (or his service agent) who sold the product will be reimbursed for any labour provided repair of this LG equipment, for a period of 12 months from the original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure. in the PLEASE NOTE: A. The dealer may restrict the B. The dealer is not guarantee to the original purchaser. to carry out service under guarantee if unauthorized modifications are apparatus, or if non standard components are used or if the serial number of the apparatus is removed, defaced, misused, or altered. obliged made to the C. Any claims made under guarantee must be directed to the dealer from whom the equipment was originally purchased. The dealer may, before carrying out service under guarantee, require a receipted account as evidence of the date of purchase. D. We respectfully point exhausted E. Aerial This or worn alignment in and guarantee does out that your dealer is not obligated to replace batteries if they become use. consumer control not affect your adjustments are not covered by this guarantee. statutory rights. REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE: RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED. Product Registration Card It is helpful to complete at least your name, address, phone, model & serial numbers and return it. This will enable LG to : assist you in the future should you lose your receipt, your units be stolen, or should modifications be necessary. To obtain information or assistance: Call 0870 873 5454 MODEL NO.* * Please complete SERIAL NO.* for your own Monday-Friday 9.00am-4.30pm DATE OF PURCHASE.* record In all cases of difficulty consult your LG dealer from whom the product was purchased - LGEUK Website ( P/NO : service website 3834RD0100K : : www.lge.co.uk www.lgelectronics.co.uk )
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- DVD recorder Silver
- Audio formats supported: MP3, WMA
- Dolby Digital, DTS
Related manuals
advertisement