advertisement
▼
Scroll to page 2
of 20
VC7780CER V-C7780CTV/CTU/CE/CEU 3828Fi3833J Table of contents Information for Your Safety......................................................................................3 How to Use.................................................................................................................4 Assembling Using the Emptying the Cleaner ........................................................................................................4 cleaning head and Accessories.............................................................................6 the Dust Chamber .................................................................................................8 Operation...............................................................................................................................9 Adjusting Park the Suction level ....................................................................................................9 System ..........................................................................................................................9 Cleaning the Motor Filter / Air Cleaner ................................................................................10 Cleaning the Dust Chamber ................................................................................................11 Cleaning the Exhaust Filter .................................................................................................11 User's Guide for Sani Punch Vacuum Nozzle (Option).....................................................12 What to do if there is something wrong with your Vacuum Cleaner .................16 What to Do if your Vacuum Cleaner Does Not Work...........................................................16 What to Do When Suction Performance Decreases ...........................................................16 2 3828Fi3833J Information for your safety Please read all the following information, which contains important instructions for the safety, the use and the maintenance of the appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. Never allow children to use the appliance unsupervised. Do not use the appliance If the mains lead is damaged or faulty. If the mains lead is damaged, it must be replaced by an approved LG Electronics Service Agent Always switch the vacuum cleaner off before: Emptying the dust chamber. Cleaning or changing the filters. Do not vacuum flammable or explosive substances(liquids or gases). Do not vacuum hot ash, embers etc. nor sharp objects. Do not vacuum water or other liquids. When you vacuum with an attachment appliance that has a rotating brush roller: Do not reach into the running brush roller. to avoid a hazard. ? ? ? Important for users in the UK. The wires in the mains lead of this BLUE-neutral appliance BROWN - are coloured in accordance with the following code: live VERY IMPORTANT: Neither wire is to be connected to the earth terminal of If any other type of plug is used, protect with a a 3 pin plug. If a 13 amp plug is fitted, a 13 amp BS 1362 fuse. 15 amp fuse at the distribution board. appliances which come with mains lead and plug moulded on: the plug moulded For replacement use a 13 amp BS 1362 fuse. Only ASTA approved or certified fuses should be used. The fuse cover/carrier must be replaced in the event of changing the fuse. For fit on to the cord incorporates a fuse. 3 Assembling Cleaner 2 Fit the large cleaning head onto the end of the tube. Spring NT** latch Telescopic tube CE** CT** 1 Nozzle outlet Large cleaning head Telescopic Push the head onto the ? telescopic tube. Press the tube spring latch to release. ? Pull out the tube to the desired length. ? ? Release spring latch to lock the tube in position. Push telescopic tube into hose handle until catch clicks. 4 3828Fi3833J Head Flexible Hose Attachment Point Button 3 Connecting the hose to the cleaner Push the end of the head into the attachment To remove pull on the flexible hose the vacuum the flexible hose from the cleaner, press then point on on the button situated the head out of the vacuum cleaner. vacuum on the head, cleaner. 5 3828Fi3833J Using the Tear the cleaning head and Accessories vinyl bag and pull out accessories. Attach the accessory holder into the side hole of And then, Fit the Dusting body. Brush & Crevice Tool and Upholstery Nozzle onto the accessory holder. Fit the accessory onto the end of the tube. Upholstery nozzle Dusting brush & Crevice tool 1 2 Upholstery Nozzle Dusting Upholstery Nozzle is for vacuuming upholstery, frames, furniture frames, books and other mattresses, etc. hard surfaces. The thread collectors Crevice Tool is for vacuuming in those normally hard-to-reach places such as help to The Brush & Crevice Tool pick up the threads and fluff. dusting Brush is for vacuuming picture reaching cobwebs, of 6 3828Fi3833J a sofa. or between the cushions 2 1 (Refer to Page 6) (See below) 3 5 4 3 (See below) 6 (Refer to Page 10) (Refer to Page 12-15) 4 Pedal CE** Head Spring latch Spring latch 3 Large cleaning head 4 Elbow tube (CE**) ? ? ? The 2 position cleaning head is equipped with a pedal which allows you to alter the brush position according to the type of floor to be Elbow tube is for cleaning under the sofa, table and bed easily. ? Connect the elbow tube to the cleaned. flexible hose and, connect the telescopic tube to the elbow tube. Hard floor (You position(tiles, parquets floor) Press the pedal to lower brush. Carpet or rug position Press the pedal to use the brush. can also connect the telescopic tube to the flexible hose without the elbow ? If tube.) you pull the spring latch, the elbow tube ? can be bent. If you stretch the elbow returned to its position. tube, it is 7 3828Fi3833J Emptying the dust chamber The dust chamber needs emptying reaches the MAX indicator the dust tank. on when dust ? Turn off the ? Press the button of the ? vacuum cleaner and cover unplug it. and pull the dust chamber out. Remove the dust chamber cap and empty the dust chamber. To reinstall the dust chamber, replace the dust chamber cap and push the dust chamber into the tank mount 8 3828Fi3833J as far as it will go. Operation On/Off button Cable reel button Key pad 1 3 2 POWER CONTROL OFF AUTO MIN MAX BOOSTER Hose handle Min Auto Max Booster Operation ? ? ? Park the Suction level Pull out the power cord to the desired length and put plug into the ? Adjust the power by using the power control switch in the handle. socket. ? When you press the button that you desire, the light comes on. Press On/Off button to start the vacuum ? Adjusting ? cleaner. To stop it, press On/Off button again. Press the cable reel button to retract the power cord after use. To store after vacuuming and pause while vacuuming. - If you press the Auto button, the power is automatically adjusted by the amount of dust. ? ? - - push Do not press the max button more than five times continuously. Continuously booster working, the motor temperature is in creased. When you have finished vacuuming, use the Park System to support the flexible hose and - When you want to use the booster, the max button twice. System cleaning head. Slide the hook on the large cleaning head into the slot on the handle of the dust chamber. 9 3828Fi3833J Cleaning The permanent cap. When the filter motor filter is situated under the dust chamber light comes on ? Press the button of ? Open ? ? the Motor Filter/Air cleaner cover the motor filter and pull requires cleaning. the dust chamber out. the dust chamber cap. Remove the motor filter by rotating it counter-clockwise. Clean the motor filter with the brush under cold running water. ? ? Allow the motor filter to dry naturally, WARNING! Gently runs separately clear. Hand wash Shake off Do not excess tumble/spindry, microwave Re-assemble and place drying. 10 3828Fi3833J running water until the water water from the filter. completely dry. the motor filter should under cold only with damp cloth. Ensure the filter is be cleaned every 6 months. The spare motor filter must be used while the other motor filter is rinse both parts or place in oven or on it back in your machine, filter frame. direct heat. Cleaning the Dust Chamber Cleaning the Exhaust Filters 2 1 3 Open the dust chamber cap. Remove two plates from the dust chamber. ? The exhaust filter is ? To clean the exhaust filter, the filter cover on body by rotating the filter cover a the washable reusable HEPA filter. counter-clockwise. ? Pull out the exhaust filter. ? Clean it with Do not ? use remove cold, running the brush Allow exhaust filter to water. this will damage dry completely in a as the filter. shaded location. ? Wash both parts with soft cloth. Gently rinse both parts under cold running The exhaust filter should be cleaned at least a once year. water. 11 3828Fi3833J User's Guide for Sani Punch Vacuum Nozzle Features This nozzle How to picks up The bottom part can even be dust inside separated use Follow the directions below for proper through beating. (Option) use. to be cleaned. Since the bottom does not stick to the surface, vacuuming is easy. Assembly Connect the nozzle to the telescopic tube. Use Set the suction power control switch to MAX POWER before vacuuming. Depending on the type of bedding, handling may be awkward or it may cause If this is the case, If the adjust the suction power control switch punch bar does If it does not move, not move, lift the nozzle even after to a lower a lot of noise. setting. slightly off the surface. doing this, check if the suction power is too low 12 3828Fi3833J or if the nozzle base is clogged with a foreign object. This Sani Punch nozzle is for effective Effective cleaning of beds and blankets to remove mites and dust. cleaning Bed & blanket Bulky & heavy blanket Light blanket & sheet When using on Lay out the blanket and vacuum it on the bed the bed When using It is easier to clean a on the floor light blanket or sheet by pushing the nozzle in the direction of the arrow. To increase cleaning efficiency for light blankets, lay on top of a bulky blanket and then clean. 13 3828Fi3833J User's Guide for Sani Punch Vacuum Nozzle For simple cleaning of the vacuum and attach the crevice tool to Cleaning Vacuum Nozzle for nozzle, detach the Sani Punch nozzle from the telescopic tube vacuum dust. Bottom Top Since the vibrator inside is composed of precision parts, never disassemble the body. Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle. Since removal of the punch bar may cause performance problems, do not warp or remove it. Attach the bottom plate properly before using. Without this bottom plate, it may not function. Since this vacuum nozzle has been made exclusively for cleaning beds, blankets and upholstery, it only for these cleaning purposes. (Using it to clean the floor may result soiling use it or a drop in performance, do 14 3828Fi3833J not use it for such purposes.) Bedding (Option) Follow the instruction below for (Do not soak the entire through washing. body of the vacuum nozzle in water, it may cause the vibrator to malfunction) Bottom Bottom Punch bar plate plate Punch bar Press the button rear side of the on the vacuum nozzle to separate the bottom plate. Straighten on Wipe all the soiled parts Wash the removed bottom of the plate body the punch bar the lower section. vacuum with a nozzle with water and dry it. cloth. Insert the attachment Push down the tabs projections on bottom plate to the vacuum nozzle to secure. grooves. 15 3828Fi3833J What to do if there is something wrong with your Vacuum Cleaner What to Do if Your Vacuum Cleaner Does Not Work Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working. What to Do When Suction Performance Decreases ? Turn off the ? Check the ? Check that the dust chamber is not full. ? Check that the motor filter ? Check that the exhaust filter is not vacuum cleaner and telecsopic tube, it. unplug flexible hose and light is not cleaning tool for blockages Empty if necessary. or obstructions. filter, if necessary. blocked. Clean the exhaust filter, if necessary. on. Clean the motor WARNING! Should it become necessary to replace the moulded plug then the detective 16 3828Fi3833J plug should be replaced by a qualified electrician. Notes 17 3828Fi3833J Notes 18 3828Fi3833J 3828Fi3833J P/No.: 3828Fi3833J 3828Fi3833J
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project