advertisement
▼
Scroll to page 2
of 20
Room Air Conditioner (Single Split Wall Mounted Type) OWNER'S MANUAL Before using your air conditioner please read this manual carefully and keep it for future reference. Prior to installation, this air-conditioning unit must be approval by the utility service which provides electricity (EN 61000-3 Norm). submitted for P/No.: 3828A22002B ENGLISH Room Air Conditioner Owner's Manual TABLE OF CONTENTS FOR YOUR RECORDS Write the model and serial numbers here: Model # Serial # You can find them on a label on the side of each unit. Dealer's Name Date Purchased Staple your receipt to this page in the event you need purchase or for warranty issues. it to prove date of READ THIS MANUAL Safety Precautions .................3 Prior to Operation Operating ..................6 preventive Remote Controller ..............7 Operation.8 Additional features...............14 you may not need to call for service at all. PRECAUTION ? Indoor unit.........................17 ? Outdoor unit ......................18 ? Operation Tips ..................19 ? ..............20 ? Room Air Conditioner part can save you a great deal the life of your air conditioner. Troubleshooting Tips first, ? 2 your over You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Maintenance and Service ....17 Troubleshooting care on of time and money Instructions...........7 Remote Control Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little Contact the authorized service technician for maintenance of this unit. repair or Contact the installer for installation of this unit. The air conditioner is not intended for use children or invalids without supervision. by young Young children should be supervised to ensure that they do not play with the air conditioner. When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts. Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only. Precautions Safety Safety To to the prevent injury Precautions user or other people and property damage, the following instructions must be followed. Incorrect classified operation due to ignoring instruction by the following indications. WARNING This symbol CAUTION This symbol Meanings of symbols will indicates the indicates the used in this manual Be sure possibility possibility are as Be harm cause of or The seriousness is damage. of death serious or ENGLISH injury. injury or damage to properties only. shown below. sure not to do. to follow the instruction. WARNING Installation in the power Plug Do not plug properly. damage or use an unspecified power cord. ? Otherwise, it will heat generation cause or electric shock or fire due to electric shock. ? It will ? In the cause electric shock supply cord is the manufacturer quallfied person Attachment) Do not modify power cord length outlet with other appliances. ? It will cause electric shock or or share the fire due to heat or or fire. damaged, it mut be its service agent in order to avoid Always perform grounding ? No grounding may cause a replaced by similarly hazard. (Y or a work. electric shock. generation. Always install air dedicated ? leakage breaker and switching board. No installation may cause Do not a fire and electric shock use the socket if it is loose or damaged. ? It may cause fire and electric shock. accident. Keep firearms ? It may cause away. fire. Owner's Manual 3 Safety Precautions Operation ? Do not operate pulling out the power It will cause or stop the unit by inserting Do not allow water to or run into electric parts. plug. electric shock or fire due to heat ? It may cause failure of machine or electric shock. generation. Do not operate with wet hands or in Do not direct airflow at damp room occupants only. environment. ? It may cause ? It may cause Do not It may use fire and electric shock accident. ? the power cord close to the cause cause It may cause Do not your health. during operation. use electric shock. the power cord combustibles, such benzene, thinner, etc. tools. gas fire and electric shock. Ventilate before It may damage Do not open the entrance or operating ? air conditioner or It may cause an explosion Do not disassemble when gas goes out. ? This could comes heating ? ? the unit if strange sounds, smell, from it. Unplug smoke electric shock. or or near as flammable gasoline, fire. modify products randomly. explosion, fire and, burn. ? It may cause failure and electric shock. CAUTION Installation Ensure that use ? for an installation console of the appliance is a long time. outdoor not damaged If leaving appliance damaged, there is damage due to the falling of product. 4 Room Air Conditioner Use caution when due to the concern of Sharp edges unpacking and installing. cause injury. could Safety Precautions Operation Never touch the metal removing ? They are parts of the unit when Do not clean the air conditioner with water. the filter. sharp and may cause Ventilate well when used injury. ? together with When a An oxygen shortage may ? occur. Do not put a pet or house plant where it will be cause Do not exposed to direct air flow. are as the insulation. It turned off. Since the fan rotates at may degrade cleaning the unit, first make sure the power and breaker stove, etc. ? Water may enter the unit and may cause an electric shock. high speed during operation, it injury. use animals appliance for special purpose such vegetables, precision machine, or or conservation of art articles. ? This could injure the pet or plant. ? It may of Stop operation or ? and close the window in storm when with windows indoor and soaking opened may cause of household furniture. wetting of ? Turn off the main power switch when not using it for a long time. ? It may failure of cause Always product insert the filters or fire. securely. Clean it Operation Do not ? cause or It may use thinner but without filters may cause failure. ? care so on the power cord that the cord should not be or vegetables or loss head of the power electric shock and plug damage. place obstacles around the absorption instead of blowing-out inlet. cause Do not once of animals plug by the taking it out. Do not failure of appliance or accident. strong detergent such use a as wax or soft cloth. Appearance may be deteriorated due to change product color or scratching of its surface. of Do not drink water drained from air place heavy object and take It may inlet every two weeks. ? damage Hold the hurricane. Operation cause property. conditioner. pressed. ? There is danger of fire or electric shock. ? It contains contaminants and will make you sick. If water enters the product, turn the power body of appliance off. power-plug out from the switch of the main After taking socket, the contact with the service center. Owner's Manual 5 ENGLISH Prior to operation Prior to operation Preparing for operation 1. Contact 2. in the power Plug 3. Use installation an specialist for installation. plug properly. dedicated circuit. a 4. Do not use an 5. Do not start/stop operation by plugging/unplugging 6. If the extension cord. cord/plug is damaged, replace it with only an the power cord. authorized replacement part. Usage 1. Being exposed to direct airflow for an Do not expose occupants, pets, plants 2. Due to the other possibility of heating devices. 3. Do not use oxygen or extended period of time could be hazardous to your health. periods of time. to direct airflow for extended ventilate the deficiency, room when used together with stoves or this air conditioner for food, pets, plants, and art non-specified special purposes (e.g. preserving precision devices, objects). Such usage could damage the items. Cleaning and maintenance 1. Do not touch the metal sharp metal 2. Do not leading use to parts of the unit when removing the filter. Injuries water to clean inside the air conditioner. possible when handling Exposure to water can destroy the insulation, electric shock. 3. When cleaning the unit, first make sure that the power and breaker are high speed during operation. There is a possibility of injury if the triggered on while cleaning inner parts of the unit. a can occur edges. very turned off. The fan rotates at unit's power is accidentally Service For repair and maintenance, contact your authorized service dealer. Symbols Used in this Manual This symbol alerts you to the risk of electric shock. This symbol alerts you to hazards that could air conditioner. NOTICE 6 This symbol Room Air Conditioner indicates special notes. cause harm to the Operating Instructions Instructions Operating Remote Controller Remove the the arrow Insert of new battery battery batteries are Reattach the NOTICE Do not Storage by pulling it making sure correctly. that the (+) and ENGLISH (-) installed cover by sliding it back into position. AAA(1.5volt) batteries. rechargeable batteries. and Tips For Using The remote control may be stored mounted ? to according Use 2 : use cover direction. the Remote Control ? on a wall. To operate the air room remote control at the conditioner, aim the signal receptor. Signal Receptor Receives the signals Operation from the remote Indication On/Off control.(Signal receiving the or one long beep. system operation. Lights up during : Lights up during Sleep Timer : Lights up during Defrost Mode : Mode beeps Lamps : Sleep sound: two short Timer Mode Auto operation. operation. Lights up during Defrost Mode or Hot operation (Heat pump model only) Start OUT DOOR OUTDOOR UNIT OPERATION : Lights up during outdoor (Cooling model only) unit Signal operation. receptor Operation indication lamps Owner's Manual 7 Operating Instructions Remote Control The remote control transmits the Operation signals to the system. 1. START/STOP BUTTON Operation starts when this button is and pressed stops when the button is pressed again. 2. OPERATION MODE SELECTION BUTTON Used to select the operation mode. Signal transmitter 3. ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. 4. INDOOR FAN SPEED SELECTOR Used to select fan speed in four steps low, medium, high, 5. JET COOL Used to start 5 6 4 1 ON 8 11 SET set the desired fan high up/down airflow direction. Used to set the time of and starting stopping operation. 12 8. TIME SETTING BUTTONS Used to 2 13 super 7. ON/OFF TIMER BUTTONS CANCEL 9 stop the speed cooling. 6. CHAOS SWING BUTTON Used to stop or start louver movement and OFF 10 CHAOS. (Speed cooling operates speed in cooling mode.) 3 7 or or adjust the time. (See page 14) 9. TIMER SET/CANCEL BUTTONS 14 Used to set the timer when the desired time is obtained and to cancel the Timer page Flip-up door (opened) operation.(See 14) 10. SLEEP MODE AUTO BUTTON Used to set Sleep Mode Auto operation.(See page 14) 11. AIR CIRCULATION BUTTON Used to circulate the Operation Mode heating (turns 12. ROOM TEMPERATURE CHECKING BUTTON Cooling Operation Used to check the Auto Operation or Auto BUTTON Healthy 8 Cooling Model( temperature. (NOT ON ALL MODELS) Used to set the desired horizontal airflow direction. Operation (See page 15) 14. RESET BUTTON Heating Operation ? room 13. HORIZONTAL AIRFLOW DIRECTION CONTROL Changeover Dehumidification air without cooling or on/off).(See page 16) room indoor fan ), Heat Pump Model( Room Air Conditioner Used ) prior batteries. to resetting time or after replacing Operating Instructions Cooling Operation Press the 1 ENGLISH Start/Stop button. respond with The unit will a 2 beep. Open the door on the remote control. To select Cooling Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the Auto Cooling 3 Close the door lower than the set within a arrow. Healthy Dehumidification on Heating (Heat pump model only) the remote control. Set the room temperature temperature. The temperature can be range of 18°C~30°Cin 1°C increments. To raise the temperature To lower the temperature 4 Set the fan speed again can select the fan speed low, medium, high, time the button is speed Natural wind For more by the fresh mode. In this the CHAOS CHAOS feeling with the door of the remote control still closed. You or in four steps- CHAOS. Each pressed, the fan mode is shifted. logic than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode, the wind blows like natural breeze by automatically changing fan speed according to logic. Owner's Manual 9 Operating Instructions Auto Operation(Optional) 1 Press the a 2 Start/Stop button. respond with The unit will beep. Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the Cooling 3 The arrow. Auto Healthy Dehumidification temperature and fan speed electronic controls based on are Heating (Heat pump model only) automatically the actual room set by the temperature. If you want to change the set temperature, close the door on the remote control and press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to you should press the button. The set temperature will then be changed automatically. two times) To raise the temperature To lower the temperature During Auto Operation: You cannot switch the indoor fan If the system is switch from the speed. It has already been set by the Fuzzy rule. operating as desired, manually switch to another mode. The system will not automatically cooling mode to the heating mode, or from heating to cooling, it must be done by manually not resetting. During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing automatically. If you want to stop auto-swing, press the chaos swing button again. 10 Room Air Conditioner up and down Operating Healthy Dehumidification Operation Press the 1 Instructions ENGLISH Start/Stop button. respond with The unit will a beep. Open 2 the door on Dehumidification the remote control. To select Operation, Healthy Operation Mode press the Selection button. Each time the button is pressed, shifted in the direction of the the operation Auto Cooling Healthy Dehumidification Set the fan 3 speed again speed in four Heating (Heat pump model only) with the door of the remote control still closed. You the fan mode is arrow. can select steps-low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted. Natural wind For Speed by the fresh CHAOS logic speed, press the Indoor Fan Selector and set to CHAOS mode. In this mode, the wind more feeling than other fan blows like natural breeze according to the CHAOS by automatically changing logic. fan speed During Healthy Dehumidification Operation: If you select the dehumidification mode on the operation selection button, the A/C starts to run the dehumidification function, automatically setting the room temp. and airflow volume to the best condition for dehumidification based In this case, however, the the room temp. either. on the sensed current setting temp. is not room displayed temp. in the remote control and you During the healthy dehumidification function, the airflow volume optimization algorithm responding to the current room temp. status and comfortable even in the high humidity season. is are automatically and makes the not able to control set room according condition to the healthy Owner's Manual 11 Operating Instructions model Heating Operation(Heat pump 1 Press the Start/Stop button. respond with The unit will a 2 only) beep. Open the door on the remote control. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the Auto Cooling 3 Close the door arrow. Healthy Dehumidification on Heating (Heat pump model only) the remote control. Set the temperature higher than the room temperature. The temperature can be set within a range of 16°C~30°Cin 1°C increments. To raise the temperature To lower the temperature 4 Set the fan speed again with the door of the remote control still closed. You select the fan speed in four steps--low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted. can Natural wind For more by the fresh mode. In this the CHAOS 12 CHAOS feeling logic than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode, the wind blows like natural breeze by automatically changing fan speed according logic. Room Air Conditioner to Operating Jet Cool Instructions Operation Press the 1 ENGLISH Start/Stop button. respond with The unit will beep. a Press the Jet Cool button to 2 the will on speed cooling operate mode and the unit operate in super high fan speed cooling mode for 30 minutes. To cancel the Jet Cool mode, press the Jet Cool button again or the room temperature setting button and the unit will operate in high fan speed on cooling 3 or the fan speed button mode. or or NOTICE During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely high speed for 30 minutes setting the room temp. automatically to 18°C. It is especially used to cool the room temp. in the shortest time in a hot summer. In heat pump mode or neuro fuzzy mode however, In order to return to the normal either the or operation mode from the JET COOL mode, you just press button, airflow volume selection or temp. setting button cooling mode selection the JET COOL button the JET COOL function is not available. again. Owner's Manual 13 Instructions Operating Additional features Mode Sleep 1. Press the Sleep Mode Auto button to set the time you want the unit to turn off To cancel the automatically. Sleep Mode, press the button several times until the star ( 2. The Timer is programmed in one-hour increments by Sleep Mode Auto button 1 to 7 times. pressing the sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner. The 3. Make sure the Mode Auto LED Sleep Setting ) disappears from the up. Mode Auto operation display. NOTICE The Sleep Mode will be operated at low fan speed (cooling) or medium fan speed (heat pump only) for quiet sleeping. IN COOLING MODE: The lights sleep temperature will automatically rise by 1°C over the next 30 by 2°C in 1 hour for comfortable sleeping. minutes and the Time 1. Time can be set only when you have pressed the Reset button. If you have just replaced the batteries, the Reset button should be pressed to reset the 2. Press the Time Setting buttons until the desired time is set. time. SET Press the Start/Stop button. Press the Timer SET button. NOTICE Check the indicator for A.M. and P.M. Delay Start/Pre-Set Stop SET 1. Make sure control the time is set correctly on the remote 4. Press the selected on/off setting by pressing the Timer SET button while aiming the remote control at the signal receptor. display. ON OFF 2. Press the ON/OFF Timer buttons to turn Timer To cancel the on or off. setting the timer. Press the Timer Cancel button while aiming remote control at the CANCEL signal receptor. 3. Press the Time (The timer lamp on the display will go out.) Setting buttons until the desired air conditioner and the time is set. NOTICE Select Delay 14 one of the OFF Timer following four Delay Room Air Conditioner types of operation. ON Timer Delay OFFand with the unit ON Timer running Delay ONand OFF Timer Operating Instructions Vertical Airflow Direction Control The up/down airflow (Vertical Airflow) by using the remote control. can be adjusted NOTICE ENGLISH If you press the CHAOS swing button, the horizontal airflow direction is changed based the CHAOS algorithm to evenly and at the same time to make the human body feel most comfortable, as if enjoying a natural breeze. Always use the remote control to adjust the up/down airflow direction. Manually moving the vertical airflow direction louver by hand could damage the air conditioner. When the unit is shut off, the up/down airflow automatically on distribute the air in the room direction louver will close the air outlet vent of the 1. Press the Start/Stop button to start the unit. system. To 2. Open the door on adjust left/right(Horizontal Airflow) direction the remote control. Press Chaos Swing button and the louvers will swing up and down. Press the Chaos Swing button again to set the vertical louver at the desired airflow CAUTION: Ensure unit is turned off before adjusting the horizontal airflow direction control. direction. Carefully open vertical louver to allow access to the horizontal airflow direction. Adjust the left/right airflow direction by Horizontal Airflow Direction Control The left/right(Horizontal Airflow) 1. Press the 2. Open Start/Stop the door on can be adjusted by using hand. (Optional) the remote control. button to start the unit. the remote control. Press the Airflow Direction Start/Stop button and the louvers will left and Direction Control Button set the horizontal louver at the desired swing again to right. Press the Horizontal Airflow airflow direction. Owner's Manual 15 Operating Instructions Air Circulation Mode Circulates the 1. Press the 2. Open room air without Start/Stop the door cooling or heating. button. the unit will respond with a beep. the remote control. Press the Air Circulation button. Close the door on control. Now each time that you press the Indoor Fan to CHAOS and back to low again. CHAOS Air NOTICE Fan speed is on low. Speed Selector, Fan speed is on medium. the fan Fan speed speed is CHAOS Air economizes power consumption and prevents overcooling. The fan from high to low or vice versa, depending on the ambient temperature. on the remote on is shifted from low high. speed is automatically changed Forced Operation Operation procedures when the remote control can't be used. operation will be started if the power button is pressed. If you want to stop operation, re-press the button. The Power button Open the front panel upward Cooling Operating mode operation During the TEST test Room Temp. < 21°C Heating High OPERATION, the unit operates in cooling mode at high speed fan, regardless of room resets in 18 minutes. operation, if remote controller If you want to use this about 3 seconds. If you want to Temp. ≥ 24°C2 1 °C ≤ Room Temp. < 24°C Cooling Healthy Dehumidification High High 22°C2 2 °C2 3 °C2 4 °C Test During Room Cooling High Indoor FAN Speed Setting Temperature temperature and Heat pump Model Model operation, signal is open the front received, the unit operates panel upward as remote controller sets. and Press the power button let it be pressed stop the operation, re-press the button. Auto restart In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions. So there is no need of activating this function by pressing any key or button. In the initial mode, the fan operates at a low speed and the compressor starts 2.5~3minutes later. As the compressor starts, the fan speed also resumes its previous setting mode. Helpful information Fan speed and cooling capacity. cooling capacity indicated in the specification is the value when the fan speed is set to high, and the capacity will be lower at low or medium fan speed. High fan speed is recommended when you wish to cool the room quickly. The 16 Room Air Conditioner High Speed for Maintenance and Service Maintenance and Service CAUTION: Before performing any maintenance, turn off the main power to the system. Indoor Unit Never Grille, Case, and Remote Control a abrasives. cleaning Supply followings: ? Volatile substances Could Could power must be disconnected before the indoor unit. NOTICE any of the Water hotter than 40°C Turn the with system off before cleaning. To clean, wipe soft, dry cloth. Do not use bleach or use ? cause deformation and/or discoloration. damage the surfaces of the air conditioner. Powder Gasoline Air filters (behind front Air inlet vent Air outlet vent panel) Vertical louver Horizontal louver Air Filters The air filters behind the front and cleaned neccessary. once grille every 2 weeks should be checked or more often if 1. Lift the front slightly access forward to 2. Clean the filter with ? ? panel remove and the filter tab pull the filter. a vacuum or warm, soapy water. If dirt is conspicuous, wash with a solution detergent in lukewarm water. If hot water (40°C or more) is used, it may of be deformed. 3. After washing with water, dry well in the shade. 4. Re-install the air filter. Owner's Manual 17 ENGLISH Maintenance and Service Replacement of Purifying Filter(Option) ? Recomended 1. Open use front period panel : About 2 years and remove 2. Remove air air filters. 3. Insert new purifying air filters. purifying filters. 2 Air filter 3 4. Reinsert air filters and close front panel. Triple Deodorizeing filter Outdoor Unit The heat outdoor unit should be checked exchanger coils and panel vents of the regularly. If clogged with the heat exchanger and panel vents may be professionally steam cleaned. dirt or NOTICE Dirty or clogged coils will reduce the operating efficiency of the system and cause higher operating costs. soot, (Rear) Air intake (Side) Piping vents Drain Hose Air outlet vents (Rear) (Rear) Air intake vents (Side) Piping Drain Hose Air intake vents (Side) Piping Drain Hose Air outlet vents Air outlet vents 18 Room Air Conditioner Maintenance and Service When the air conditioner is not going to be used for a When air conditioner is not used for going to be When the air conditioner is to be used long time. a Operate the air conditioner on dry 17 for cleaning filters.) out the internal mechanisms. Turn off the circuit the ENGLISH unit. (Refer to page This will again. Clean the air filter and install it in the indoor mode for 2 to 3 hours. ? long time. breaker, and disconnect plug. Check that the air inlet and outlet of the indoor/outdoor unit are not blocked. CAUTION: Turn off the circuit breaker when the air conditioner is not going to be used for Dirt may collect and may a long time. cause a fire. Remove the batteries from the remote control. Operation Tips Do not overcool the room. Keep blinds or curtains Keep the closed. This is not good for the electricity. health and wastes Do not let direct sunshine enter Adjust the horizontal airflow direction to room when the air operation. ensure a in the Make sure that the doors are Avoid doors and opening windows to keep as much shut as Clean the air filter regularly. tight. the cool air in the room. vertical and uniform temperature room. Ventilate the room occasionally. Blockages possible temperature the conditioner is in and windows room uniform. in the air filter Since windows reduces the airflow and lowers the cooling and dehumidifying effects. Clean at least once in it is are kept closed, idea to open them and ventilate the room now and a good then. every two weeks. Owner's Manual 19 Maintenance and Service Troubleshooting Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer service center. Case The air conditioner does not operate. ? Have you made a mistake in timer operation? Has the fuse blown or has the circuit breaker been The room has a See page Explanation ? peculiar ? odor. tripped? - Check that this is not the 14 a smell exuded damp walls, carpet, furniture, by cloth items in the or - room. It is seems that condensation leaking ? from the air Condensation occurs when the airflow from the air conditioner cools the warm room air. - conditioner. Air conditioner does not operate for about 3 minutes ? This is the ? Wait about three minutes and when restarted. Does not cool or protector of the mechanism. operation will heat ? Is the air filter dirty? See air filter cleaning 17 instructions. effectively. ? Has the ? Are the indoor unit's air inlet temperature been set incorrectly? or The air conditioner is ? For a - noise that sounds like water -This is the sound of freon noisy. 9, 12 outlet vents obstructed? operation - begin. flowing flowing. inside the air conditioner unit. ? For noise that sounds like the compressed atmosphere. -This is the sound of the dehumidifying water being processed inside the air conditioning air a releasing into - unit. Remote control ? Are the batteries faint, ? Are the batteries inserted in the or no display is display at all. and Crack sound is heard. 20 Room Air Conditioner ? (-) depleted? opposite (+) 7 directions? This sound is generated by the expansion/constriction of the front panel, due to changes of temperature. etc. - or
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project