advertisement
▼
Scroll to page 2
of 20
User's Guide 700M 700ME Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached dealer when you on the back cover and quote this information to your require service. Precautions Important This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Keep it in an accessible place for future however reference. On Use Safety power cord supplied with the unit. In case you use another power that it is certified by the applicable national standards if not being only the cord, make sure provided by the supplier. If the manufacturer or power cable is faulty in any way, please contact the the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is easily accessible after installation. a power source indicated in the specifications of the monitor. If you are not sure what type of power supply you have in your home, consult with your dealer. Operate the this manual monitor or listed only from on Overloaded AC outlets and extension cords cords and broken plugs. They technician for replacement. Hands must be Do not It dry when holding the damage the can cause Make may result in fire sure to or power cord by electric shock. completely insert the are a power dangerous. So are frayed shock plug or to avoid an electric shock. disassembling, bending, pulling power power fire hazard. Call your service or plug. Insecure connections heating can cause fire. Do not Open There the Monitor. are no user serviceable components inside. Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the monitor is not operating properly. There are To Avoid Personal Injury : on a sloping shelf unless properly secured. place a stand recommended only by the manufacturer. Do not try to roll a stand with small casters across thresholds or deep pile Do not the monitor Use carpets. A1 up. Important Precautions To Prevent Fire or Hazards: turn the monitor OFF if you leave the room for more than a short Always period of time. Never leave the monitor ON when leaving the house. Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During lightning storm or when the monitor is to be left unattended for an period of time, unplug it from the wall outlet. bring magnetic devices such as magnets or motors near the picture a extended Do not tube. On Installation Do not allow anything to rest upon or roll over the power cord, and do not the monitor where the power cord is subject to damage. Do not use this monitor sink, laundry tub, in near water such basement, as near a place bathtub, washbowl, kitchen swimming pool. Monitors are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat a wet or near a failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug, can cause etc. Place the monitor in a built-in enclosure unless proper ventilation is Cover the openings with cloth or other material. Place the monitor near or over a radiator or heat Do not install the monitor in On a dusty area. It provided. source. can cause fire. Cleaning Unplug the monitor before cleaning the face of the monitor screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the monitor On screen because overspray may cause electrical shock. Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. A2 Connecting the Monitor Before setting up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. Insert the hooks into slots. 3. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position. NOTE This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Slot Hook Latch A3 Hook the Monitor Connecting Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. NOTE This is This a simplified representation of the rear view. view represents a general model; your monitor rear may differ from the view as shown. Signal Power Cord Attached Wall-outlet type* Type* Cable Detached Type* * Varies PC-outlet type* PC MAC Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. A4 according to model. Control Panel Functions Front Panel Controls Control Function Power Button Use this button to turn the monitor Power This Indicator (DPMS) lights on or off. up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode, this indicator color changes Indicator to amber. MENU (or OSD) Button Use this button to enter Buttons exit the Use these buttons to choose the SELECT or on screen display. (or SET) Button on screen Use this button to enter screen or adjust items in display. a selection in the on display. Control Direct Access Function Buttons Bring up Contrast Buttons Bring up The Contrast and On Screen Brightness functions Display (OSD) menu. A5 adjustment Brightness adjustment are also available in the On Screen Display (OSD) Control Adjustment Adjustment Screen Making adjustments to the image size, position and operating parameters of the monitor is quick and easy with the On Screen Display Control system. A short example is quick and easy given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the monitor to stabilize for at least 30 minutes before To make adjustments in the On Screen making image adjustments. Display, follow these steps: Case 1 Case 2 Press the MENU (or OSD) Button, then the main menu of the OSD appears. To access a becomes control, use highlighted, Use the the Buttons. When the icon you want or press the SELECT (or SET) Button. Buttons to adjust the item to the desired level. Accept the changes by pressing the SELECT (or SET) Button. Exit the OSD by pressing the MENU (or OSD) Button. A6 On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus. Main Sub menu Reference menu To Brightness BRIGHTNESS/ CONTRAST POSITION SIZE Contrast and screen V Position To H Position screen V Size To adjust the To adjust the shape adjust the position of the size of the screen H Size Tilt SHAPE adjust the brightness contrast of the of the screen Side Pincushion S Pincushion Balance Parallelogram Trapezoid H Corner Top Corner Bottom Corner PRESET COLOR 6500K To customize the color of the 9300K screen Temp R/G/B(User Color) SETUP Video Level To customize the Language for a user's screen operating status environment OSD Time Degauss SPECIAL To improve the clarity and stability of the screen Recall Reset Moire H Moire V Moire Purity : A7 Adjustable On Screen You were Display(OSD) Selection introduced to the and Adjustment procedure of selecting and adjusting an item the OSD using descriptions system. Listed below are the icons, icon names, and icon of the all items shown on the Menu. NOTE The order of icons may differ To depending adjust the brightness and OSD the model on (A8~A11). contrast of the Adjust screen Description Brightness adjust the brightness of the screen. To Contrast To To adjust the position of the OSD adjust the contrast of the screen. screen Adjust Description Vertical Position To move image up and down. Horizontal Position To A8 move image left and right. On Screen To Display(OSD) Selection adjust the OSD size of the and Adjustment screen Adjust Description Vertical Size To adjust image height. Horizontal Size To To adjust the shape of the OSD adjust image width. screen Adjust Description Tilt To correct image rotation. Side Pincushion To correct the a concave or convex bowing of image. Side Pincushion Balance To correct the balance of both sides bowing. Parallelogram correctly adjust the skew of the image. To Trapezoid To correct H geometric distortion. Corner* Top Corner* Bottom Corner* To correct * an irregular distortion displayed image. This function is available for designated models only. A9 of the On Screen Display(OSD) Selection To customize the color of the OSD and Adjustment screen Adjust Description PRESET 6500K/ 9300K Select the ? 6500K: ? 9300K: Select the TEMP screen bluish white. screen prefer among color. reddish white. Slightly Slightly temperature which you reddish or bluish or any color in between. RED Set your own color levels. GREEN BLUE To customize the OSD screen status for a user's Adjust operating environment Description VIDEO LEVEL This item is used to select the monitor's input signal level. The normal level used for most PCs is 0.7V. If the out screen or becomes suddenly washed- blurred, please select 1.0V and try again. LANGUAGE To choose the language in which the displayed. OSD Menus are available in 12 languages: English, German, French, Spanish, Italian, Swedish, Finnish, Portuguese, Korean, control names are Chinese, Polish and Russian. OSD TIME Set the OSD time, i.e. the menu will remain off automatically. before it shuts Adjust the time to 5, 10, 20, 30 or 60 seconds. A10 length of time a on-screen On Screen To Display(OSD) Selection improve OSD the and clarity and stability Adjust Adjustment of the screen Description DEGAUSS To manually demagnetize the screen to showing incorrect images or colors. avoid RECALL You this function to reload the can use modified parameters for screen display operation, as specified by the user after purchase: Position, Size, Side Pincushion, Side Pincushion Balance, Parallelogram, Trapezoid (These recalled options may differ depending on the mode selected: Preset, User, or New). If you don't want to recall the monitor to these modified settings, use the button to select CANCEL and then press the SELECT RESET (or SET) Return to all button. factory default settings except Brightness, Contrast, Tilt, "LANGUAGE": Color 9300K, Video (These on reset Level, OSD Time, Moire options may differ depending the mode selected: Preset, User, or New). If you don't want to reset the monitor, use the button to select CANCEL and then press the SELECT MOIRE (or SET) button. This item allows you to reduce the degree of moire. (Moire is caused by interference Horizontal Scan Line with the periodical dot normally OFF(H:0/V:0). moire adjustments may affect the focus screen). The of the It is screen. Moire adjustments may shake slightly while the moire reduction function is on. * This function is available for designated models PURITY* only. A11 Use to adjust the purity on the if the color appears uneven. screen Troubleshooting Check the No following before calling for service. image appears Is the power cord of the monitor connected? Check and see if the power cord is connected properly to the power outlet. Is the power indicator on? Press the Power button. light Is the power on and the power indicator green? Adjust the brightness and the contrast. Is the power indicator amber? If the monitor is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Do you This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the monitor. See the 'Specifications' section of this manual and configure your monitor again. see an "OUT OF FREQUENCY" message on the screen? Do you see a "SELF DIAGNOSITICS" message on the screen? The screen is This message appears when the signal cable between your PC and your monitor is not connected. Check the signal cable and try again. flickering. Is the vertical frequency less than 70Hz or is your monitor set to the interlaced mode? Set the vertical frequency to 72Hz or higher, and consult the video card user manual for instructions on converting to a non-interlaced mode. (You can set this option under the Display icon of the Control Panel.) Do you have any Remove magnetic sources, such as power adapters, speakers, or high-voltage lines, away from magnetic material such as adapter, or highvoltage line near to your the monitor. monitor? Do you hear a "~ding" sound while the monitor is flickering? Use the normal degaussing function. This function clears the screen and reduces any screen blur that may occur due to the surrounding magnetic field. The screen may flicker for about 5 seconds, accompanied by a "~ding"sound. A12 Troubleshooting The screen color is not normal. Do you see basic discoloration (16 colors)? Set the color depth to 256 colors or higher: use 'Control Panel' 'Display' 'Settings' 'Color Palette' Is the screen color unstable monochrome? Check the connection of the signal cable. Or pull out the video card of the PC and insert it again. Do you see black dots the screen? This is due to a small amount of foreign or abnormally florescent material that became fastened on the mask during manufacturing. It will not affect product or on performance. Do you partial blurring on the screen? see a This happens due to interference from surrounding magnetic fields, as created when speakers, steel structures, or high-voltage lines are placed near the monitor. Remove any such materials from the immediate vicinity and use the DEGAUSS icon screen adjustment menu to fix the screen. I see an after-image Do you see the after-image even when you turn off the monitor? on the on the screen. A premature aging of the monitor pixels may cause the prolonged display of a single image on the screen. Be sure to use a screen saver to maximize the service life of the monitor. I see waves on Do you see the the screen. wave directly on the screen? This occurs in inverse proportion to the screen focus, which can be caused by a particular frequency or video card. Brighten the screen and use the 'MOIRE' icon on the screen adjustment menu to adjust the screen. Have you installed the monitor driver? Have you installed the monitor driver? Be sure to install the monitor driver from the monitor driver CD (or diskette) that comes with your monitor. Or, you can also download the driver from our web site: http://www.lge.com. A13 Specifications Picture Tube 17 inches (16.0 inches viewable) 90 degree deflection pitch 0.27mm dot AGARAS(Anti-Glare Anti-Reflective Anti-Static) coating Sync Input Video Input Plug&Play Horizontal 71kHz (Automatic) Freq. Vertical Freq. Input Form Signal Input 30 Input Form Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive Resolution(max) 1280 50 - - 160Hz (Automatic) Separate TTL, Positive/Negative 15 pin D-Sub Connector x 1024@60Hz DDC 2B Power Normal ≤ 73W Consumption Stand-by/Suspend ≤ 15W Power Off ≤5W Dimensions Width 45.0 cm &Weight (with tilt/ swivel stand) Height Depth 39.9 cm 41.6 cm Net 15.2 kg (33.51 lbs) Power AC 100-240V~ 50/60Hz 2.0A Input Environmental Conditions / 17.7 inches / 15.7 inches / 16.4 inches Operating Conditions 0˚C to 40 ˚C Temperature 10 % to 90 % non-Condensing Humidity Storage Conditions -20˚C to 60 ˚C Temperature 5 % to 90 % non-Condensing Humidity Tilt/Swivel Stand Signal cable ), Detached ( O ) Attached( Attached( O ), Detached ( Power cord Attached Regulations 700M :MPR-II or ) Detached 700ME:TCO99 NOTE Information in this document is subject to change without A14 notice. Preset Modes 1234 (Resolution) VESA 640 x 480 37.50 75 VESA 800 x 600 46.88 75 600 53.68 85 68.677 85 VESA 800 VESA 1024 x x 768 Using the Audio Functions Side Jacks Headphone Jack A tomatically mutes the speaker volume headphones are plugged in. when the Microphone Jack Can be used instead of the built-in microphone. Rear Panel Jacks Audio In -Sky Blue Connects to the *LINE OUT jack of the PC sound card. AUDIO IN MIC. OUT Mic Out - Connects to the Pink microphone jack of the PC sound card. Microphone Operation Using this jack reduces the length of cable needed to reach the PC's sound card. In order to use the MIC jack, use a cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the MIC input jack of your sound card (if available). *LINE OUT A terminal used to connect to the Make sure that the connecting speaker including a built-in amplifier (Amp). terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume. NOTE If the Audio Out of the PC sound card supports both Speaker Out and Line convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual). Out, A16 Using the Audio Functions Front Panel Controls Control Function Audio Mute Use to mute audio Microphone Built-in microphone. Brings up to the audio Buttons in the You were menu. Use these buttons to choose Buttons Audio Selection and source. on screen or adjust Adjustment introduced to the procedure of selection and adjusting an item the OSD using descriptions To make items display. system. Listed below are the icons, icon names, and icon of the items shown in the main Menu. adjustments in the On Screen Display, follow these steps: A17 On Screen Display(OSD) Selection and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown in the Menu. You were introduced to the VOLUME 70 ON Main Menu Description Raises or lowers audio level. Raises or lowers treble level. Raises or lowers bass level. VOLUME TREBLE BASS Changes levels of left/right speaker. BALANCE Enables or disables microphone MICROPHONE : Adjustable NOTE The order of icons may differ depending A18 on the model. usage. Audio Specifications Audio Audio Specifications RMS Audio Output Input Sensitivity Speaker Impedance A19 1W + 1W 0.7 Vrms 8Ω (Right + Left)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement