advertisement
▼
Scroll to page 2
of 29
Home Theater Easy OWNER'S MANUAL MODEL : DW7531P (DW7531P, DWE-630AWE, DWE-615E) Before connecting, operating adjusting this product, booklet carefully and completely. please read this instruction or Safety Precautions CAUTION NOTES ON COPYRIGHTS: It is forbidden RISK OF ELECTRIC SHOCK DO NOT OPEN via cable, CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient to constitute magnitude a risk of electric law to copy, broadcast, show, broadcast in public, or rent copyrighted material without by play permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. shock to persons. SERIAL NUMBER: The serial number is found The exclamation point within is intended to alert the important operating user an equilateral triangle to the presence of and maintenance instructions in the literature (servicing) accompanying the product. TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in confined space a similar unit. CAUTION: This To Digital ensure manual Video Disc proper carefully use Player employs of this Laser product, please System. read this owner's and retain for future reference should the unit require maintenance, contact (see service procedure). an Use of or controls, adjustments, other than those a specified authorized service location the performance of procedures herein may result in hazardous radi- ation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The (dripping as vases, 2 apparatus should splashing) and no should be placed on or not be exposed to water objects filled with liquids, such the apparatus. the back of this unit. This number is unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. WARNING: TO REDUCE THE RISK OF FIRE OR ELEC- on ___________________________________ ___________________________________ to Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. . . . . . . . . . . . . . . . . . 20 20 .20 Pause.............................21 Precautions.............................5 MovingtoanotherTrack................21 RepeatTrack/All/Off..................21 NotesonDiscs..........................5 Search.............................21 PlayableDiscs...........................4 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................7 RearPanel................................8 Speakers.................................9 Preparation Random...........................21 RepeatA-B.........................21 3DSurround........................21 .21 ChangingtheAudioChannel. OperationwithJPEGDisc...................22 ViewingaJPEGdisc.....................22 MovingtoanotherFile.................22 . . . . . . . . . . StillPicture.........................22 Connections...........................10-12 ConnectingtoaTV......................10 .11 2.1ChannelSpeakersConnections. .11 SoundAdjustmentofSpeakers. .12 ConnectingtoOptionalEquipment. BeforeOperation.......................13-16 GeneralExplanation......................13 On-ScreenDisplay.......................13 InitialSettings........................14-16 14 Initial Settings General Operation Language..........................14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Toflipthepicture.....................22 Torotatepicture......................22 .22 NotesonJPEGRecordings. ProgrammedPlayback.....................23 Programmed Playback with Audio CD and . . . . . . . . . . . MP3/WMADisc.........................23 ProgrammedPlaybackwithVideoCD RepeatProgrammedTracks. ErasingaTrackfromProgramList. ErasingtheCompleteProgramList. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 .23 .23 .23 AdditionalInformation......................24 Picture.............................14 LastConditionMemory...................24 Sound.............................15 ScreenSaver...........................24 Others.............................15 SystemSelect..........................24 ParentalControl......................16 Reference Operation .17-19 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............17 . . . . . . . . GeneralFeatures........................17 Troubleshooting..........................25 LanguageCodeList.......................26 CountryCodeList.........................27 Specifications............................28 MovingtoanotherTITLE...............17 17 Moving to another CHAPTER/TRACK . . . . . Search.............................17 Still Picture and Frame-by-Frame Playback . About the 18 symbols for instructions SlowMotion.........................18 Indicates hazards Random...........................18 itself Repeat............................18 RepeatA-B.........................18 Indicates special operating Indicates tips TimeSearch........................18 3DSurround........................18 or other likely to cause material damage. and hints for harm to the unit features of this unit. making the task easier. Zoom..............................19 MarkerSearch.......................19 SpecialDVDFeatures....................19 TitleMenu..........................19 DiscMenu..........................19 CameraAngle.......................19 .19 ChangingtheAudioLanguage. .19 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitle............................19 3 INTRODUC Before Use Playable Disc-related terms Discs Title DVD The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) In addition, this unit can play a DVD-R, DVD±RW, Kodak PICTURE CD, SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. -- -- Depending the conditions of the recording equipment or the CD-R/RW (or DVD-R/±RW) disc itself, some CD-R/RW (or DVD-R/±RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Notes on accompanying feature content enabling easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track Notes on or additional feature content, or music album. Each title is assigned a title reference number Video CD -- (DVD only) (Video Sections of audio or an enabling CD and audio CD only) a picture or a musical piece on a video CD CD. Each track is assigned a track number, you to locate the track you want. Scene On video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available functions may be added. Refer also to the instructions supplied or other with the DVDs and Video CDs. Some DVDs made for business purposes may not be played on the unit. of video CDs Types There are two types of video CDs: Video CDs PBC equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the functions, or other typical computer-like operations. Moreover, still pictures of high system via resolution menus, search can be played if they are included in the disc. Regional code of the DVD player and DVDs player is designed and manufactured 2 for playback of region "2" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "2" or "ALL". If you try to play any other discs, the message "Check Regional This DVD Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is 4 prohibited by area limits. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Precautions After the unit Handling When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To keep Do not near radio, or or turn off the use volatile such liquids, leave marks Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, temperature as Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. on a plastic products in long period of time. They will or the surface. Do not To clean the cabinet soft, dry cloth. If the surfaces soft cloth solution. Do not benzine, case. the unit Cleaning use a store the disc in its insecticide spray, as the unit. Do not leave rubber a playing, the exterior surfaces clean contact with the unit for Use discs Storing thinner, or moistened with lightly use are a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static use spray intended for older About records. vinyl Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Handling Do not touch the get on playback by the edges or tape VCD1.1 side of the disc. so that fingerprints the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions following symbol is represented by the symbol. one to the disc of the DVD Video CDs with the PBC (playback control) function. discs Hold the disc on A section whose title has applicable only Notes symbol display on the disc. Video CDs without the PBC (playback control) function. will not CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. 5 INTRODUC Front Panel and Display Window POWER Switches the player ON and OFF. Remote Power indicator Display Lights green when the DVD player is turned on. sensor window Shows the current status of the player. Disc Tray Insert Opens or a disc here. / OPEN/CLOSE ( closes the disc tray. ) PLAY(2) Starts playback. Pause playback temporarily/ press repeatedly for PAUSE(;) frame-by-frame playback. STOP(9) Stops playback. Reverse Go to beginning of current chapter/track or to Skip/Scan ( Q / S ) PREVIOUS chapter/track. Press and hold for two seconds for a fast reverse Skip/Scan ( T / R ) to NEXT chapter/track. Forward Go Press and hold for two seconds for ANGLE active TITLE fast forward search. a Indicates current title number CHP/TRK DVD search. Indicates current chapter or track number DVD inserted Indicates total CD Audio CD inserted playing time/elapsed time VCD Video CD inserted MP3 MP3 or PROG. WMA disc Programmed playback active inserted RANDOM RANDOM playback active Indicates current player Indicates function: Playback, Pause, MP3 VCD 6 mode etc. CD DVD TITLE CHP/TRK PROG. RANDOM ALL AB repeat Remote Control VOLUME +/volume of Adjusts POWER Switches DVD Player POWER OPEN/CLOSE speakers. (DVD Player) S.W LEVEL ON and OFF. Uses to (Sub woofer) DISPLAY - 2 display. Selects an item in the menu on a menu. ( ; ) ? ? Selects a subtitle DVD * angle setup speaker ? if ? ? ? track number on ? ? menu. all. A-B sequence. RANDOM Plays ? the REPEAT Repeat ? tracks in random order. ZOOM Enlarges video image. sound. Operation Range Point the remote control at the remote sensor AAA AAA (7 m) and press from the front of the sensor. About 30° in each direction of the front of the battery installation Detach the battery the remote control, and insert cover on (size AAA) batteries aligned correctly. the buttons. remote a Repeat chapter, track, title, Remote control Angle: or CLEAR ? MUTE remote Press and hold button for about Enters to the program edit mode exits from that. menu. MARKER SEARCH Distance: About 23 ft track. ANGLE SEARCH Remote Control or go to or PROGRAM ? point during playback. Turns off ) beginning program list or a mark on the MARKER SEARCH menu. MARKER Displays S Removes SETUP Marks any ( language. camera or removes ) chapter two seconds. a menu. available Accesses Reverse SKIP/SCAN previous chapter language (DVD) or audio channel (CD). a T Search backward*/ go to of current chapter or track audio Selects ( PLAY(H) Starts playback. 0-9 number buttons SUBTITLE Forward SKIP/SCAN ? STOP(9)? Stops playback. an selection. Search forward*/ go to next or track. ForwardSLOW(.)? Forward slow playback. an menu available. ? ReverseSLOW(,)? Reverse slow playback. Selects video CD the discs Title menu, if Displays playback temporarily/ press repeatedly for frame-by-frame playback. AUDIO a TITLE Pauses Selects numbered items in INTRODUC menu. of menu Acknowledges DVD disc. PAUSE/STEP the Displays setup SELECT/ENTER MENU Accesses Removes the with PBC. (left/right/up/down) 4 3 sound level of sub adjust RETURN - Accesses On-Screen tray. woofer. Switches sub woofer ON and OFF. 1 and closes the disc Opens with the rear of two R03 and Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). sensor. 7 Rear Panel COAXIAL Connect (Digital audio out jack) to digital (coaxial) audio equipment. AUDIO OUT Connect to (Left/Right) an amplifier, receiver, or stereo system. AC Power Cord VIDEO OUT Connect to a TV with video COMPONENT VIDEO OUT Connect to a TV with Y Pb (Y Pb Pr) Pr inputs. S-VIDEO OUT Connect to a TV with S-Video inputs. OPTICAL Connect (Digital audio out jack) to digital (optical) audio equipment. Do not touch the inner panel. Electrostatic damage to the unit. 8 inputs. pins of the jacks on the rear discharge may cause permanent Plug into the power source. Speakers STANDBY/ON Switches the sub woofer ON and OFF. Standby indicator Lights red when the mode (off). sub woofer is in Standby PREATION VOLUME 3/4 volume of all Changes Display speakers. window Shows the auxiliary channel or volume. AUX1/2 Selects the STANDBY/ON VOLUME channel auxiliary (AUX1 or AUX2). AUX 1/2 SPEAKER Connectors Connect the left and right speakers to these terminals. L R RESET RESET This button is used to solve the problem ? as following symptom; When the power can not on, even if power cord is connected to the outlet. ? When the window not ON ? Main POWER switch display. When the sub woofer does not AUX 1 POWER IN AUX 2 R L AUDIO IN (L/R) jacks Connect the audio AC Power Cord Plug into the power does operate normally. OFF Switches the main power of sub woofer ON and OFF. display source. DVD player and an output cable from the external unit system, TV/Monitor, VCR etc.) (Audio to these terminals. 9 Connections Tips Depending Rear of TV your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on COMPONENT VIDEO Pr Pb S-VIDEO INPUT Y AUDIO INPUT R L described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound AUDIO OUT reproduction, connect jacks to the audio in jacks the player's of your audio/video equipment. amplifier, receiver, stereo or See "Connecting to Optional Equipment" on C page 12. Caution -- -- -- Make directly to the TV. Tune the TV to the correct video input channel. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure the DVD Player is connected system. Connecting Make the to a TV of the following connections, depending capabilities of your existing equipment. one on Video connection 1 2 Connect the VIDEO OUT the video in jack on the Connect the Left and jack on the DVD Player to TV using the video cable (V). Right AUDIO OUT the DVD TV Player to the audio left/right (A) using the audio cables. in jacks of jacks on the S-Video connection 1 Connect the S-VIDEO OUT to the S-Video in cable 2 the TV the DVD using Right Player the S-Video AUDIO OUT the DVD Player to the audio left/right (A) using the audio cables. Component Video (Color Stream ) in jacks of jacks on the connection Connect the COMPONENT VIDEO OUT the DVD TV 2 on on (S). Connect the Left and TV 1 jack jack using Player an to the Y Pb Pr Connect the Left and the DVD TV 10 corresponding cable (C). Right in jacks on jacks on the AUDIO OUT Player to the audio left/right (A) using the audio cables. in jacks of jacks on the Rear of DVD player S AV VIDEO INPUT Connections 2.1 Channel (AUX1) 2 on AUDIO OUT Right to the audio left and your sub woofer cords To the speakers using by matching the colors of the cords. (L, R). AUX1/2 supplied speaker of the terminals and the sound from the DVD enjoy on jacks on right in jacks (A). Connect the those 3 Player Connecting 1 player Connect the Left and the DVD Connections Speakers to DVD Connecting 1 (Continued) 2 to an optional equipment Connect the Left and Right AUDIO OUT jacks on an optional equipment (VCR, CD Player, TV, AUDIO, etc.) to the audio left and right in jacks (AUX2) on your sub woofer (A). To enjoy the sound from optional equipment, an press AUX1/2 on the sub woofer to select the sub woofer to AUX2. source of Sub woofer player, press the sub woofer to select source of the sub woofer to AUX1. L R RESET Notes -- Be sure terminal to match the on the cords speaker cord to the appropriate components: 3 to 3 and # to #.If reversed, the sound will be distorted the are ON OFF and will lack base. -- -- If you AUX 1 POWER IN speakers with low ing, adjust the volume carefully to output on the speakers. use front Do not disassemble the front maximum input R rat- L avoid excessive cover of supplied speak- er. -- The sound is muted during playing back a A disc recorded in DTS. Left Right Speaker Sub woofer Speaker L R AUDIO OUTPUT L VCR R RESET or optional equipment Sound L R ON Adjustment of Speakers POWER switch (rear of the sub woofer) When pressing the upper part of the power switch, power is ON. Pressing the lower part turns OFF the OFF POWER IN AUX 2 R L power. Black Master Volume of speakers Press VOLUME 3/4 on to increase Red or the sub woofer or VOLUME +/- decrease the sound level of Press MUTE to mute sound of your speakers. speakers. A Sound Level of Sub woofer Press S.W LEVEL and then VOLUME 3/4 woofer VOLUME +/- or increase or on on the sub the remote control to decrease the sound level of sub woofer. Source of sub woofer Press AUX1/2 channel Rear of DVD (AUX1 on or the sub woofer to select an auxiliary AUX2). player 11 PREATION Connections Connecting (Continued) Optional Equipment to Rear of DVD player Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and DVD Player to the amplifier, receiver, cables (A). Right AUDIO OUT audio left or stereo jacks on the and right in jacks on your system, using the audio Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) Connect 1 one of the DVD Player's OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O coaxial X) audio cable. 2 (See "Digital Digital OPTICAL Audio player's digital output. Output" on page 15). Multi-channel sound digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS will be in DTS Licensing agreement, the digital output digital out when DTS audio stream is selected. Notes If the audio format of the digital output does not match the -- capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. To see screen 12 the audio format of the current DVD in the display, press AUDIO. COAXIAL DIGITAL INPUT A -- A DIGITAL AUDIO You will need to activate the -- X O on- Amplifier (Receiver) R L AUDIO INPUT Before General This manual Operation Temporary Explanation basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. gives On-Screen General screen. playback Some items On-screen 2 3 TRACK Repeat Track ALL Repeat All Tracks Repeat A-B Repeat Off AB OFF Resume be Action an The selected item will be Press 1/2 to change The number buttons (e.g., title can of For from this prohibited or Video CDs only) point not available item. an be also be used for number). (non-PBC only) provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. highlighted. setting Video CDs Some discs may not item. the play (non-PBC Notes during playback. Press 3/4 to select numbers Repeat Chapter display operation Press DISPLAY 1 be Title CHAPT displayed on the TV changed on the menu. can can Repeat TITLE Display status Feedback Field Icons some press SELECT/ENTER to execute the setting functions, setting. DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio language and Digital Audio Output mode Subtitle language Angle D 5.1 CH ABC OFF 1/1 Sound VCD2.0 1 ENG NORM. titles, and skips to the desired title number. Shows the current chapters, and skips chapter number and total number of to the desired chapter number. Shows the searches elapsed playing time, and the point by the elapsed time directly. Shows the current audio soundtrack encoding method, and changes the setting. channel Shows the current subtitles changes the language, number, and language, and the angle number and total changes the angle number. mode, number of and setting. Numbers, SELECT/ENTER 1/2,or AUDIO 1/2,or ANGLE 1/2,or SOUND VCD1.1 Items Function (Press 3/4 to select desired item) Track Number Shows the current track 1/4 Time 0:20:09 Audio Channel and PBC On Shows the mode, NORM. changes and number, total number of tracks skip to the desired track number. elapsed playing Shows the audio STER. Sound 1/2,or Numbers, SELECT/ENTER SUBTITLE Shows the current sound changes 1/2,or Numbers, SELECT/ENTER 1/2,or setting. Shows the current angles, and Selection Method channel, (Display only) and the setting. 1/2,or Numbers, SELECT/ENTER -- 1/2,or the audio channel. Shows the current sound changes time Selection Method AUDIO mode, and 1/2,or SOUND 13 PREATION Before Initial You Operation (Continued) Settings set your can Menu Select Personal Preferences own on the play- you Language see for the language a setup menu. This is the menu when you press SETUP. er. Initial 1 General Settings Operation Press SETUP. The setup Disc Audio English Disc Subtitle Spanish Disc Menu French Rating German Country menu appears. TV Aspect Menu Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Language Digital Audio Output Others Spanish Code Italian Aspect Menu Italian Code Chinese Language Picture Polish Digital Audio Hungarian Output Other-------- TV Aspect 4:3 Letterbox: Select when Others nected. 2 Press 3/4 to select the desired item. The screen selected DVD will show the current item, as well as setting for the alternate setting(s). While the desired item is selected, press 2, then 3/4 to select the desired setting. 3 4 require SETUP, RETURN, 5 setup Press SELECT/ENTER to confirm your selection. Some items additional steps. Press or PLAY to exit the Displays above and below the images picture. 4:3 Panscan: Select when Scan style picture are is played cut off). a Select Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Menu, Audio, and Subtitle. original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 26. If you enter the wrong language Original : The code, press CLEAR. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Code Italian Aspect Menu Spanish Language Chinese Polish Digital Audio Output Hungarian Other-------- Others 14 Code Aspect Language Digital for the disc's bars Others Audio Output sides of the 16:9 wide TV is connected. 4:3 Menu language a style (Both Disc Audio Rating DVD masking conventional TV set is back in that 16:9 Wide: Select when TV Language a with con- connected. The video material formatted in the Pan & Country Disc standard 4:3 TV is theatrical menu. Language a Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has Set the The variety of audio output options. player's Digital Audio Output according to the a type of audio system you DRC, Vocal, PBC and Auto Play settings can be changed. Press 3/4 to select the desired item and press SELECT/ENTER. The setting of the selected item is use. changed between On and Off. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if you connected the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Disc Audio DRC On Disc Subtitle Vocal On Disc Menu PBC On Rating Auto Country TV Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or other equipment decoder or with a DTS amplifier. a 2-channel The DVD digital sounds in the player outputs PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system. Disc Audio DOLBY DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM /PCM Rating Country TV Code Aspect Menu Audio Output Dynamic Range With the DVD Control (DRC) program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set format, you can hear a DRC to On for this effect. Sample Freq. 48 KHz Language Digital Audio Others PCM: Select when connected to stereo Code Language Digital MPEG decoder. Off Aspect Menu decoder, Dolby Digital Play 96KHz Output Vocal Set Vocal to On is Others playing. only when a multi-channel karaoke DVD The karaoke channels on the disc will mix into normal stereo sound. Sample Frequency change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz sig- PBC To nals to 48KHz your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is so Set Playback (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. Auto You Play set up the DVD Player so a DVD disc automatistarts playing whenever the DVD is inserted. cally without any further If Auto Play search a play DVD can made, this unit will pass each type of signal through processing. Control mode is set to title that back the title On: Auto Off: Auto Play Play On, this DVD player will playback time automatically. is long most and then function is activated. function is not activated. Note The Auto Play function may not work for some DVDs. 15 PREATION Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain applies able for selection more on some country-dependent. disc complete the disc. These scenes on 8, and alternatively, 1 to to the scenes are suitable discs. or Disc Menu 6 avail- are Country TV Country TV Menu Audio Output Unlock Change Others Select 1 "Rating" on the Setup menu using the 3/4 buttons. 2 While 3 When you have not entered a password yet. Enter a 4-digit password using the numbered but- "Rating" tons to create is 2. selected, press personal 4-digit security password. then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify. When you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passIf you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. 4 rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be played. Higher unless an rated alternative scenes scene If will not be is available The alternative must have the lower same played on rating the disc. or a suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. one. no Press SELECT/ENTER to confirm your 5 selection, 16 the Code Country setup 2 3 4 While 5 6 Shift the Code is 3 of step on selected, press 2. "Rating" Select the first character second the 3/4 buttons menu. Country Follow using using 2 character using cursor on left. using the 3/4 buttons. button and select the 3/4 buttons. Press SELECT/ENTER to confirm your country code selection, then press SETUP to exit the menu. Note Confirmation of the the code is then press SETUP to exit the Changing the 1 Follow 2 Enter the old 3 Select is necessary when the 4-digit code" Steps 4-digit 1-2 code shown above to the left as (Rating). code, then press SELECT/ENTER. Change using 3/4 buttons then press SELECT/ENTER. 4 Enter the new 4-digit code, then press SELECT/ENTER. 5 exactly the same code a second fy by pressing SELECT/ENTER. 6 Press SETUP to exit the Enter If you If you forget your time and veri- menu. 4-digit code your password, to clear the current password, follow the procedure below. forget 1 Press SETUP to 2 Use the Number buttons to enter the display the setup menu. 6-digit number "210499". The 4-digit password is display for a moment. rating menu. 4-digit password changed (see "Changing below.). a Ratings Output a word, then press SELECT/ENTER. Select Select 1 1 Digital Audio Others 2 Language Code Language Digital 3 Aspect US Aspect Menu 4 Code Code Set Rating 5 Rating to the list Disc Menu 8 7 were List", page 27.). Disc Subtitle you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Subtitle disc, referring Disc Audio rated from whose standards country/area a Code (See "Country The Parental Control feature allows Disc Audio DVD used to rate the DVD video to scenes are Ratings Code 3 Enter a new code as cleared. "P CLr" appears shown above to the left on the (Rating). Operation Playing a with DVD and Video CD DVD and Video CD Playback Setup Turn on the VCD2.0 the TV and select the video nected to the DVD Audio DVD system: Turn input source General Features Note VCD1.1 input source con- the audio system and select connected to the DVD player. Moving 1 2 3 Press OPEN/CLOSE to open the disc Load your chosen disc in the playback side down. READING appears starts automatically. tray. When The tray. the TV screen, and playback If playback does not start, menu might appear is or loading a Moving want to title/chapter view, then press SELECT/ENTER to start you play- back. Press TITLE or MENU to return to the menu screen. VCD2.0 setting the menu screen. and the exact operating procedures for depending on the disc. may differ Follow the instructions on the each using menu setup. See page If Parental Control is set and the disc is not within the the 4-digit code must be entered and/or the disc must be authorized "Parental -- Control", DVDs may have a Your player will not different from your player is 2 (two). to select a to can move num- title number. 1 /12 on a more 1/3 disc has than one more than track, you one chapter can move or a to another follows: as > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, or press DISPLAY. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track the numbered buttons using (0-9). Note For two-digit numbers, press (0-9)in rapid succession. the numbered buttons Search DVD VCD2.0 VCD1.1 1 Press and hold SKIP/SCAN . Notes Rating settings (not authorized), title, you menu screen. You also may set PBC to Off under 15. -- title number Press RETURN to return to the one to another CHAPTER/TRACK chapter/track Use the number buttons to select the track you want to view. Menu (0-9) VCD1.1 a than Press SKIP/SCAN . DVD Use the 1 234 buttons to select the more follows: as bered button DVD displayed may be displayed first after Video CD which offer a menu. DVD DISPLAY, then press the appropriate disc has menu screen DVD disc has Press When a menu screen a another title instead. If to another TITLE on press PLAY. In some cases, the disc use 1/3 tray, with the Press OPEN/CLOSE to close the otherwise, all operations described the remote control. Some features may also be available on the Setup menu. player. on Unless stated (see page 16). region code. on play discs that have a region code player. The region code for this two seconds during playback. The now player will or > for about go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). 3 To exit SEARCH mode, press PLAY. 17 OPERATION Operation with DVD and Video CD General Features Still Picture and VCD2.0 DVD 2 You will The by pressthe remote control. VCD2.0 DVD T or 2 Use the SLOW t VCD1.1 icon appears Repeat The All icon appears Off icon appears or Video CD with a screen. a screen. the TV on T to select the required speed: (backward), or (forward). to menu Repeat A-B A* To use PBC, you the a third time. screen. DVD AB repeat " Note playback in reverse is not applicable for VCD2.0 A appears 2 Press A-B VCD1.1 OFF title: a briefly starting point. the TV on screen. at your chosen end point. "A B" appears briefly on the TV screen, and the repeat sequence begins ("AsB" appears the display window). Video CD. Karaoke DVD " * the on function. See page 15. VCD2.0 sequence in a must set PBC to Off Repeat 1 Press A-B at your chosen Random the TV on press REPEAT Repeat mode, Repeat setup 1/16, t 1/8, t 1/4 or t 1/2 T 1/16, T 1/8, T 1/4 or T 1/2 To exit slow motion mode, press PLAY. Slow motion the TV on repeat the disc currently playing, press REPEAT 3 To exit On during playback. t 3 Repeat Track The will enter SLOW mode. player The Note Slow Motion 1 Press SLOW t on Repeat Track/All/Off second time. during playback. repeatedly - repeat the track currently playing, press REPEAT. 2 To now PAUSE/STEP ing 1 To VCD1.1 go into PAUSE mode. advance the picture frame-by-frame player can (continued) Frame-by-frame playback 1 Press PAUSE/STEP The Video CDs again 3 To cancel the sequence, press A-B. VCD1.1 1 Press RANDOM during playback or in stop mode. The unit automatically begins Random Playback and "RANDOM" appears on the display window. 2 To return to normal "RANDOM" playback, press RANDOM disappears on the display window. until Time Search 1 Press DISPLAY SKIP/SCAN > during Random playback, (track) and resumes playback. 2 Within 10 This function works with DVD Karaoke discs and only video CD without PBC. OnaVideoCDwithPBC,youmustsetPBCtoOffon menu to use Playback DVD VCD2.0 TITLE TRACK DVD Video Discs invalid VCD1.1 the - ALL display. the number buttons to enter hours, minutes, and currently playing chapter, This unit press icon appears on the TV seconds, press SELECT/ENTER starts from the selected time to confirm time, playback Repeat Title icon appears Repeat mode, Repeat the disc. If you enter will continue from the current point. DVD on VCD2.0 VCD1.1 3D SUR on the TV press REPEAT screen. Off icon appears on the TV a third time. screen. can produce a 3D Surround simulates multi-channel audio screen. second time. a effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from 1 Press DISPLAY 2 Use 3 or The sound a home theater during playback. 4 to select the sound option system. will be option. highlighted. 3Use1or2totoselect"3DSUR". To turn off the 3D Surround 18 sec- in the box. OFF repeat the title currently playing, press REPEAT The to select the Time Repeat Chapter/Title/Off Repeat Chapter 3 To exit right 3D Surround REPEAT. The time of the If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. NORM. 2 To elapsed playing the start time. Repeat The use start time. Enter onds from left to an repeat on-screen seconds, required 4 Within 10 the Random function. See page 15. 1 To dis- screen. seconds, press 3/4 Search icon in the the CHAPT on-screen at The "-:--:--" appears in the Time Search box. Note setup the playing current disc. 3 Within 10 the on appears The during playback. The Time Search box shows the the unit selects another title Random -:--:-- The Time Search function allows you to start any chosen time on the disc. play Tips By pressing 0:20:09 DVD effect, select "NORM". or with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) during playback or still playback the repeatedly, discs: Menus to acti- level magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the normal resume playback or the contents of DVD Video Checking vate the Zoom function. If you press ZOOM increases up to six return to paused image. DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press SELECT/ENTER. DVD Title Menu 1 Press TITLE. If the current title has screen. Note The zoom function may not work for some 2 The DVDs. Marker Search VCD2.0 DVD a menu, the Otherwise, the disc list menu can and subtitle 3 To menu menu will appear may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on again. VCD1.1 DVD Disc Menu MARKER SEARCH 1/9 DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special 1 Press MENU. You can nine points To enter 1 start playback from a memorized point. Up be memorized. can 2 To is menu displayed. the disc menu, press MENU remove again. mark, follow these steps. a During disc playback, press MARKER when playback reaches the spot that you want to Camera The Marker icon will appear Repeat step on the TV briefly. screen 1 to enter up to nine Marker points on a disc. To Recall a Angle If the disc contains memorize. 2 The disc to DVD scenes 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene angle appears on the a display. 1 ENG 1 disc During playback, The MARKER SEARCH press SEARCH. menu will appear on 2 Within 10 seconds, press 1/2 to select number that you want to recall. a the screen. Marker will start from the Marked 4 To remove the MARKER SEARCH menu, press SEARCH. To clear 1 a During disc playback, The MARKER SEARCH 2 menu will appear on the screen. Press 1/2 to select the Marker number that you want to 3 Subtitles press SEARCH. VCD2.0 VCD1.1 repeatedly during playback to hear channel (STER., LEFT or RIGHT). DVD ABC dif- a 1 ENG Press SUBTITLE different subtitle dif- a repeatedly during playback languages. to see the erase. Press CLEAR. Note The Marker number will be erased from the list. 4 the Audio Channel 5.1 CH to hear Press AUDIO ferent audio Marked Scene Language repeatedly during playback language or audio track. Changing scene. the Audio Press AUDIO ferent audio 3 Press SELECT/ENTER. Playback Changing D DVD Repeat steps 2 and 3 to erase If appears, the feature is not available on the disc. additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. 19 OPERATION with Audio CD and MP3/WMA Disc Operation Playing CD Audio CD and MP3/WMA Disc MP3 The DVD ings an CD-ROM, CD-R on or playing MP3/WMA recordings, MP3/WMA Recordings on right. 1 a disc and close the read the notes files that have on The player About technology. WMA(Windows compression of JPEG MP3/WMA Disc limited Press 3/4 to select the MP3/WMA then press SELECT/ENTER. appears on the TV screen. Press RETURN to move to the MP3/WMA-JPEG choice menu. menu 1. 2. 3. Folder2 Folder3 Folder4 Folder5 Folder6 Clear All 5. OFF a Media A to 4 track then press PLAY or the MP3 format. Creator", which single creates session disc playback 6. File Press TITLE to system. MP3/WMA files in the MP3/WMA file in the 1st names should be named incorporate ".mp3" or using or 8 letters or less ".wma" extension "********.WMA". 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. to the next page. move Press MENU to requires no ISO9660 file an or use a new one. e.g. "********.MP3" menu. is playback Playback starts. During playback, time will appear on the display window and Playback will stop at the end of the disc. player MP3/WMA files. If you wish MP3/WMA files, format all the data in cannot and must elapsed playing with this compatibility SELECT/ENTER. the current track's offers double the audio Audio) - the disc a compression follows: as track, it folder, and SELECT/ENTER. 3 A list of files in the folder appears. Press 3/4 to select Audio) Microsoft audio first track. If there is a Media Sampling Frequency / only at 44.1kHz (MP3), 22.05 44.1kHz (WMA) Bit rate / within 32 320kbps (MP3), 32 128kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files. We recommend that you use "EasyCD Folder7 Press 3/4 to select file - Folder1 00:00 a - 4. Program Folder8 MP3 file that has an ".mp3". WMA(Window An WMA file is MP3 WMA MP3 WMA not read tray. CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 The MP3/WMA can extension other than Audio 2 Recordings compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". MPEG1 audio CD-RW discs. Before Insert MP3/WMA An MP3 file is audio data MP3/WMA formatted record- play can on About MP3 WMA Player Notes move to the previous page. This DVD player requires discs/recordings to meet certain technical standards in order to achieve Program MP3 WMA Program CD TRACK01 TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK 5.mp3 TRACK06 TRACK 6.mp3 TRACK07 TRACK 7.mp3 Clear All TRACK08 STER. 0: 56: 18 Audio CD MP3 Clear All TRACK 8.mp3 00:00 NORM. 1 MP3/WMA menu list, are use in a menu file list and want to return to the Folder the 3/4 to highlight SELECT/ENTER to return to the 5 To 20 stop playback and press previous at any other or are WMA conditions files). That require certain pre-existing (see above) to insure compatible playback. OFF Tip If you are many different types of recordable disc formats (including CD-R containing TRACK 4.mp3 TRACK05 Pre-recorded DVDs set to these standards. There TRACK 3.mp3 TRACK04 playback quality. optimal automatically menu screen. time, press STOP. Customers should also note that required permission is in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. with Audio and MP3/WMA Disc Operation CD Pause MP3 1 Press PAUSE/STEP WMA playback, PAUSE/STEP again. press PLAY or To 1 press repeat CD to another Track or > playback to go to the next track beginning of the current track. Press SKIP/SCAN . twice In previous case WMA briefly during step back to briefly CD, the track number to go using to any directly track, the numbered buttons icon and "A Repeat " * appears to The enter (0-9) Repeat 1 To Track/All/Off WMA repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears on the menu screen. at your chosen end point. icon and "A B" appears on the menu screen, begins to play repeatedly. Repeat icon and "OFF" appears 3D Surround produce can the press menu screen. a 3D Surround effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from 1 Press DISPLAY menu on play, CD simulates multi-channel audio MP3 the again Repeat This unit during playback. CD on 3 To exit the sequence and return to normal A-B again. track. of audio sequence. disc playback, press A-B at your chosen start- and the sequence to return to the or a 2 Press A-B The Press SKIP/SCAN . the MP3 CD During ing point. The Moving A-B Repeat during playback. 2 To return to (Continued) a home theater or system. during playback. screen. 2 To repeat all tracks on a disc, press REPEAT 2 Use 1 a sec- The sound ond time. The Repeat icon and "ALL" appears the on or 2 to select the sound option will be highlighted. 3Use3or4totoselect"3DSUR". menu screen. To turn off the 3D Surround 3 To cancel The Repeat mode, Repeat Search press REPEAT icon and "OFF" appears CD on MP3 third time. menu screen. Changing WMA two seconds during playback. The now will effect, select "NORM". the Audio Channel CD Press AUDIO different 1 Press and hold SKIP/SCAN . player the a option. repeatedly during playback to hear a audio channel (STER., LEFT, or RIGHT). > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . > or repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3 To exit SEARCH mode, press PLAY. CD Random 1 Press RANDOM MP3 WMA during playback or when playback is stopped. The unit automatically begins RANDOM and or "RAND." appears on the Playback and display window menu screen. 2 To return to normal edly play Random until RANDOM window and press RANDOM repeat"RAND." disappears on the dis- playback, or menu screen. 21 OPERATION Operation Viewing with JPEG Disc JPEG disc a JPEG 5 This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a disc and close the TV menu appears on The JPEG the to another File > during viewing a to the previous file. once or JPEG To Press 3/4 to select the JPEG then press SELECT/ENTER. on the TV player will during slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. MP3 WMA appears or Still Picture 1 Press PAUSE/STEP menu time, press STOP. appears. to advance to the next file picture screen. The JPEG menu at any other Press SKIP/SCAN . The 2 stop viewing Moving tray. The MP3/WMA-JPEG choice To now flip the picture Press 3/4 during showing a picture picture horizontally or a vertically. screen. to flip the JPEG To rotate Folder1 Folder2 picture Folder3 Press 1/2 Folder4 Folder5 clockwise picture Folder6 Folder7 during showing or a picture to rotate the counter clockwise. Folder8 Slide Speed Off Notes Press 3/4 to select a folder, and SELECT/ENTER. 3 A list of files in the folder appears. Press RETURN to choice move to the MP3/WMA-JPEG menu. on JPEG Recordings upon the size and number of the JPEG files, it could take a long time for the DVD player to read the disc's contents. If you don't see an on-screen Depending display after several minutes, some of the files are too reduce the resolution of the JPEG files to less big than 2 mega pixels and burn another disc. --- Tip If you list, are " file list and want to return to the Folder on the remote to Total number of files and folders highlight on the disc should be less than 650. and press SELECT/ENTER to return to the previous 4 a the 34 buttons use " in Some disc may be incompatible due to different recording format or condition of disc. menu screen. If you want to view a particular file, press 3/4 to highlight a file and press SELECT/ENTER or PLAY. When you are using software such as Creator" to burn the jpeg files into the Viewing the file proceeding starts. During viewing a file, press RETURN previous menu (JPEG menu). when Press TITLE to to move to the to the next page. Press MENU to move to the previous page. JPEG move Folder1 Picture1.jpg Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 5/32 1024X768 Slide Speed 5/32 Off 1024X768 Picture5.jpg Tip There are three Normal, Slow, and Slide Speed options: Fast, Off. Press 1/2 to highlight the Slide 3/4 to select the option you want to viewing then press use, and press SELECT/ENTER. Speed 22 that all the selected files have the copying into the CD "Easy CD CD-R, ensure ".jpg" extensions layout. If the files have rename File them ".jpe" or ".jpeg" extensions, please as ".jpg" files. ".jpg" extension will not be able to be read by this DVD player. Even though the files are shown as JPEG image files in windows explorer. names without Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 MP3 function enables you to store your favorite tracks from any disc in the player memory. Program Program during playback or in the Program Edit mode. mode to enter the E The mark will appear to the right of the word the right side of the menu screen. on Note On a Video CD with setup menu to PBC, you the use must set PBC to Off on the function. See page 15. Program contain 30 tracks. can Press PROGRAM 1 with Video CD Programmed Playback and MP3/WMA Disc The WMA stop Program Insert Video CD and close the 1 2 Press PROGRAM while The VCD Program menu OPERATION tray. is playback stopped. will appear. Program VCD E TRACK 1 TRACK 2 Note TRACK 3 Press PROGRAM to exit the Edit Program TRACK 4 mode; TRACK 5 TRACK 6 E the mark will Select 2 place disappear. TRACK 7 track, then press SELECT/ENTER a Clear All TRACK 8 the selected track on the Program to list. Note Repeat step 2 Program list. 3 to place E Program CD additional tracks the Program MP3 WMA TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 TRACK 3.mp3 TRACK 7 TRACK 7.mp3 Clear All TRACK 8 0: 56: 18 STER. Audio CD 00:00 3 OFF track you selected last is highlighted on Press 3/4 to select the track you want to start 5 playing. 6 Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. 7 resume playback, normal REPEAT select a the Program from track of CD "PROG." indicator list programmed (or MP3/WMA) list and then press SELECT/ENTER. disappears on the menu screen. disappears in the display window. Tracks the on the program second time. a menu Repeat mode, Erasing a Track from the on menu screen. press REPEAT icon and "OFF" appears Repeat list, press on icon and "ALL" appears Repeat on Program the a third time. menu screen. List 1 Press PROGRAM MP3/WMA disc Program playback programmed PROGRAM. repeat all tracks The Press PLAY to start. To from screen. To cancel to the next page. Press MENU to move to the previous page. move on left. on icon and "TRACK" appears Repeat The all of the tracks with repeat the track currently playing, press REPEAT. The To Playback stops after have played once. menu. "Programmed Playback playback Repeat Programmed menu the program list. Press TITLE to normal "PROG." indicator To programmed resume 4 playback, press Press 2. The Program Clear All MP3/WMA menu 2-6 of steps Audio CD and MP3/WMA disc" To TRACK 3.mp3 TRACK 8.mp3 NORM. PROGRAM to exit the TRACK 4.mp3 TRACK 5.mp3 TRACK 6.mp3 Follow or TRACK 2.mp3 TRACK 4.mp3 TRACK 6 Press RETURN 3 E TRACK 8.mp3 TRACK 5 4 on E The during playback (Audio CD and only) or in the stop mode to enter the Edit mode. mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing the 1 Follow steps List" as Program Complete Program 1-2 of "Erasing a list. List Track from Program above. 2 Use 3/4 to select "Clear All", then press SELECT/ENTER. The complete Program The programs are for the disc will be erased. also cleared when the disc is removed. 23 Additional Information Last Condition DVD This CD player Memory VCD1.1 memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load a disc that has its settings memothe latest stop position is automatically recalled. player. rized, Notes -- -- Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play it. Screen Saver The appears when you leave the DVD Player in stop mode for about five minutes. After the Screen Saver has been engaged for about five screen saver picture minutes, the DVD Player will automatically System turn itself off. Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE on the front panel for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO). ? When the selected system does not coincide with the system of your TV, normal color picture may not be displayed. AUTO: Select when DVD player is connected with Multi player is connected with player is connected with PAL- system TV. NTSC: Select when DVD NTSC-TV. PAL: Select when DVD TV. 24 Troubleshooting Check the following guide for the possible cause of a before problem service. contacting Cause Symptom Correction No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does No disc is inserted. Insert that the DVD or, audio CD indicator in the display not work. No The TV is not set to receive DVD picture. signal output. a (Check window is lit.) Select the appropriate video input mode so the picture from the DVD on the TV player The video cable is not connected disc. cord into the wall outlet the TV on appears Connect the video cable screen. securely. securely. No sound. The connected TV power is turned off. Turn The Select the correct equipment connected with the audio cable is not set to receive DVD signal output. The audio cables not connected are the TV. on audio receiver mode of the input you can listen to the sound from the DVD player. so Connect the audio cable securely. securely. The power of the equipment connected with the audio cable is turned off. Turn The Set the Digital Audio Output wrong position. Speaker cords securely. Sound level is too low. The playback picture is are is set to the not connected the on equipment the audio cable. Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER. Connect them The volume control is set to 0. Adjuts Speaker cords correctly. Connect them The disc is are not connected connected with securely. the VOLUME to L, R (right) than 0. higher correctly, that is L to (left) to R. Clean the disc. dirty. poor. The DVD not start player does playback. No disc is inserted. Insert a disc. (Check that the DVD, audio CD indicator in the DVD or display is lit.) An unplayable disc is inserted. Insert a (Check the disc system, and Regional code.) playable type, color The disc is placed upside down. disc. Place the disc with the playback side down. The disc is not placed within the guide. Place the disc inside the dirty. Clean the disc. The level is set. Cancel the the The remote control The remote control is not does not work remote properly. sensor of the pointed DVD player. at the player. There is an obstacle in the remote control and the path of the DVD player. The batteries in the remote control are tray correctly Rating function or change level. Point the remote control at the remote sensor The remote control is too far from the DVD rating the disc guide. The disc is Rating on of the DVD Operate (7 m). player. the remote control within 23 ft Remove the obstacle. Replace the batteries with new ones. exhausted. 25 REF NC Language Code List Enter the appropriate (See page 14). code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 26 Code List Country Enter the appropriate code number for the initial setting "Country Code" (See page 16). Code Country Code Country Code Country Code Country AD Andorra ER Eritrea LC Saint Lucia SC Seychelles AE United Arab Emirates ES LI Liechtenstein SD Sudan AF Afghanistan ET Spain Ethiopia LK Sri Lanka SE Sweden AG FI Finland LR Liberia SG Singapore AI Antigua and Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE Georgia MK Macedonia ST Saint Tome and AZ GF French ML Mali SU Former USSR BA Azerbaidjan Bosnia-Herzegovina GH Ghana MM Myanmar SV El Salvador BB Barbados GI Gibraltar MN Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP Guadeloupe (French) MR Mauritania TF French Southern BH Bahrain GQ Equatorial MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY Malaysia TN Tunisia BS Bahamas GY MZ Mozambique TO Tonga BT Bhutan HK Guyana Hong Kong NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG TW Taiwan CA Canada HT Haiti NI Nigeria Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine ID Indonesia NO IE Ireland NP Norway Nepal UG CG (Keeling) Islands Central African Republic Congo UK Uganda United Kingdom CH Switzerland IL Israel NR Nauru UM USA Minor CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF Polynesia (French) VC Saint Vincent & CR Costa Rica IT Italy PG CS Former Czechoslovakia JM Jamaica PH Papua New Philippines CU Cuba JO Jordan PK CV Cape Verde JP CX Christmas Island KE Japan Kenya CY Cyprus KG CZ Czech DE CF Barbuda (European Guyana Guinea Georgia & S. Sandwich (USA) Mayen Islands Republic Principe Territories (French) Tobago Outlying Islands Guinea City State Grenadines VE Venezuela Pakistan VG PL Poland VI Virgin Virgin PM Saint Pierre and VN Vietnam Kyrgyzstan PN Pitcairn Island VU Vanuatu KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Republic Republic Islands Anguilla Miquelon (French) Islands Islands (British) (USA) 27 REF NC Specifications General Power AC 110-240V requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity , 50/60 Hz 14W 360X48X241mm(wxhxd) 2.1 kg 5˚C to 35˚C (41˚F to 95˚F) 5%to90% System Laser Semiconductor Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response laser, wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB OUT connectors only) (DVD) (CD) Outputs VIDEO OUT 1 S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative (C)0.3V(p-p)75Ω COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 Audio output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 5 V Audio output (analog audio) 2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1 Vp-p 75 Ω, sync (p-p), 75 Ω, negative, Optical RCA jack x 1 sync, Mini DIN connector x 4-pin x x 1 1 1 Speakers Active subwoofer Power Power AC 220, 50Hz 30W requirements Output Power consumtion 50W Inputs Type Impedance Signal-to-noise ratio Frequency Response AUX1,AUX2 1 Left and Right Speakers - 15W + 15W - Way 1 - 2 Speaker Way 2 Speaker 4Ω 8Ω More than 80 dB More than 80 dB 45-180Hz 200 Sound Pressure Level 82 dB/W 83 dB/W Rated 30W 15W 60W 30W 230x315x272mm 126x311x142.5mm 6.20kg 0.8 Input Power Max. Input Power Net Dimensions (W Net Weight x H x D) (1m) - 20,000 Hz (1m) kg Accessory Videocable.......................1 Audiocable.......................2 Speakercable.....................2 Remotecontrol....................1 Batteries.........................2 Design and specifications are subject to change without notice. Manufactured under license from Confidential unpublished DTS and DTS 28 Digital Out works. are Dolby Laboratories. Dolby and the double-D symbol are trademarks Copyright 1992-1997 Dolby Laboratories. All rights reserved. registered trademarks of Digital Theater Systems, Inc. of Dolby Laboratories. P/NO : 3834RS0057A
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement