advertisement
▼
Scroll to page 2
of 32
Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number, serial number and manufactured of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Model number : Serial number : Manufactured : RT-20CA55M / RT-21CA55M For informations of Guarantee and Service Center / Parts, refer to your Warranty Card. please Contents Installation 3 Location and function of controls Remote control handset Battery installation Front panel / Side panel 4 Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function / Auto Demonstration On screen language selection (option) 7 On 8 screen menus Menu selection TV stations Auto programme tuning Manual programme tuning Programme edit Favourite programme Calling the programme table 9 Setting up Picture adjustment PSM (Picture Status Memory) Picture adjustment / Eye (option) Turbo picture selection (option) Sound adjustment (option) SSM (Sound Status Memory) / Sound Turbo sound selection (option) Sound output selection (option) Stereo/Dual reception (option) NICAM reception (option) 15 17 adjustment Time setting Setting the Auto sleep 20 clock / Setting the On/Off timer Other functions TV and AV modes / Auto AV switching (option) Child lock / Blue back (option) / Tilt (option) Degaussing (option) / Games (option) / Sleep timer 21 PIP operation (option) On and off / Input mode selection for sub picture Swapping between main and sub pictures Programme selection for sub picture Sub picture size / Sub picture freeze Sub picture position change / 9 or 4 sub picture 24 Teletext (option) Switch on/off / SIMPLE text TOP text (option) / FASTEXT / 25 Special teletext functions Connection of external equipment Aerial socket Audio/Video in/out sockets (option) Euro scart socket (option) S-video/Audio in sockets (S-AV) (option) Component in sockets (option) Headphone socket (option) Troubleshooting 2 check list 28 31 Installation Power This set ed on operates the label on on an AC mains the back In the event of thunderstorms ial and mains supply, the voltage is as indicatapply DC power to the set. powercuts, please pull out the aer- cover. or Never plugs. Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Service Never remove the back high voltage properly, unplug it very cover of the set as this can expose you to and other hazards. If the set does not operate and call your dealer. Aerial Connect the aerial cable to the socket marked +75 Ω cover. For the best reception an on the back outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto screen. Care should be taken not to expose the set to any the unnecessary vibration, moisture, dust set is in or heat. Also ensure that the position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock. placed a 3 Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Before you use the remote control teries. See the next page. POWER MUTE 1 11 2 1 2 3 4 5 6 7 8 9 0 TV/AV 1. 2. 3. 12 SOUND MENU PICTURE 10 4. PR 5. () REW PLAY FF P/STILL STOP REC I/II/ SSM/ PSM SLEEP PIP FAVOURITE off to NUMBER BUTTONS switches the set on from standby or directly LIST EYE/ select MENU (or INDEX) selects a menu. selects an index page in the teletext mode (only EYE/* (option) switches the eye function on or a 14 16 4 accepts your selection 6 programmes OK 6. or displays the current mode. MIX TIME REVEAL ? MODE SIZE STILL POSITION 9/4PIP SWAP Q.VIEW returns to the 9 PR () / () (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. automatically. (Volume Up/Down) adjusts the volume. adjusts menu settings. previously viewed programme. M 7. TELETEXT BUTTONS (option) These buttons are used for teletext. For further details, see the 'Teletext' section. 8. PSM (Picture Status recalls your preferred 9. FAVOURITE selects a favorite programme. i INPUT Memory) picture setting. 10. TURBO PICTURE / SOUND BUTTON selects Turbo picture and sound. 11. MUTE switches the sound on or off. 12. TV/AV selects TV or AV mode. switches the set on from standby. (option) number. TELETEXT off. Q.VIEW TEXT/ 4 standby. F / G 7 PR or scans 13 15 19 standby VOL VOL PR 8 from on OK () 18 POWER switches the set models). (option) 3 TURBO/ 5 handset, please install the bat- Location and function of controls 13. I/II/* (option) selects the language selects the sound during dual language broadcast. (option) output. POWER 14. LIST displays 15. SLEEP sets the 16. SSM/* recalls sleep 11 timer. (º/*) (option) selects surround sound. 3 4 5 6 7 8 9 MENU/INDEX 0 TV/AV 12 TV 4 13 I/II/ EYE/ (option) PIP switches the sub picture on or off. PR +/selects a programme for the sub picture. SWAP alternates between main and sub picture. INPUT selects the input mode for the sub picture. SIZE adjusts the sub picture size. STILL freezes motion of the sub picture. POSITION relocates the sub picture in clockwise direction. 9/4 PIP switches on or off the 9 or 4 sub pictures. * : No 2 3 18. VCR BUTTONS control a LG video cassette recorder. 19. PIP BUTTONS 1 2 (Sound Status Memory) (option) your preferred sound setting. 17. SURROUND MUTE 1 the programme table. PR VOL 5 () VOL OK PR () Q.VIEW LIST 14 6 PSM SSM/ SLEEP 15 16 17 8 FAVOURITE / 9 PICTURE SOUND TURBO/ 10 function COLOURED BUTTONS : These buttons TELETEXT models) or programme edit. are used for teletext (only Battery installation The remote control handset is powered by two AAA (or AA) type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and ) marked inside the com- (Without TELETEXT / PIP) - partment. LIST Q.VIEW TEXT/MIX/ or SIZE/ HOLD/ TIME/ REVEAL/ 7 UPDATE/ X PSM FAVOURITE Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. SSM/ PICTURE TURBO/ (With SLEEP/ ? M SOUND / TELETEXT / Without PIP) 5 Location and function of controls Front panel Shown is a simplified representation of front or side panel. Here shown may be somewhat different from your set. VIDEO VIDEO 6 (L/MONO) r ON/OFF MENU OK F VOL G E PR D VIDEO (L/MONO)-AUDIO-(R) ! P-TURBO-S I AUDIO I AUDIO 1234 (R) ! 7 ! ! 7 ! r ON/OFF 5 6 MENU OK F VOL G E PR D VIDEO 789 (L/MONO)-AUDIO-(R) ! S-TURBO-P VIDEO VIDEO 6 1234 (L/MONO) I AUDIO I AUDIO (R) ON/OFF (Side panel) r MENU 5 OK F VOL G E PR D 1234 789 6 VIDEO AUDIO 5 ! TURBO SOUND PICTURE 67 8 9 PRD ON/OFF r MENU F VOL VOLG OK PRE 1 234 5 9 1. MAIN POWER (ON/OFF) switches the set on or off. 2. POWER/STANDBY INDICATOR illuminates brightly when the set is in dims when the set is switched on. 3. REMOTE CONTROL SENSOR 4. MENU selects 5. OK standby mode. a menu. accepts your selection or displays (Volume Up/Down) adjusts the volume. adjusts menu settings. D / E (Programme Up/Down) the current mode. F / G selects a programme or a menu item. switches the set on from standby. 6. IN SOCKETS (AV2) (option) Connect the audio/video out sockets of external equipment to these sockets. 7. HEADPHONE SOCKET Connect the headphone 8. 9. 6 AUDIO(or AUDIO-L/R)/VIDEO (option) plug to this socket. TURBO SOUND/PICTURE (option) switches Turbo sound or Turbo picture on or off. EYE (option) adjusts picture according to the surrounding conditions. Basic operation On and off 1. 2. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on 3. 4. fully. Press the POWER button on the remote control handset. The set reverts to standby mode. Press the main power button again to switch the set off. Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket. Programme selection You can select buttons. a Volume programme number with the D / E or NUMBER adjustment Press the F / G button to POWER MUTE 1 2 3 4 5 6 7 8 9 0 TV/AV MENU SOUND adjust the volume. OK TURBO/ Quick view () Press the Q.VIEW button to view the were previous programme PR you VOL watching. VOL PR () Mute function Press the MUTE button. The sound is switched off and the W appears. You can cancel it by pressing the TURBO SOUND button. MUTE, F / display G, SSM/*, I/II/*, I/II/ SSM / Auto Demonstration To review all the menus programmed in the set, press the OK butpanel control for about 10 seconds. To stop auto demonpress any button of the set or POWER button of the remote Q.VIEW ton of the stration, control. On screen language selection The menu can be displayed First select your language. 1. on the (option) screen in desired language. Press the MENU button and then D / E button to select the Special menu. 2. 3. Press the G button to select Language. Press the G button and then D / E button to select your desired 4. All the on screen displays will appear in the selected language. Press the OK or F button to select the Special menu. Repeatedly press the MENU button to return to normal TV language. viewing. 7 On screen menus The an dialogue between you and your set takes place on screen with operator menu. The buttons required for the operating steps are also displayed. Menu selection 1. Press the MENU button and then D / E button to display each menu. 2. 3. Press the G button and then D / E button to select a menu item. Press the G button to display the sub menu or the pull-down menu. 4. POWER MUTE 1 2 3 4 5 6 7 8 9 0 TV/AV Change the setting of an item in the sub MENU TURBO menu e. play. On some models, the Language will not display. Auto programme BG AutoOprogramme ManualOprogramme { System StorageOfrom { { { I { NormalOsearch { DK OK ProgrammeOedit FavouriteOprogramme { TurboOsearch { M VOL ()O}{OOKOMENU () PR VOL I/II ()O}{O OKOMENU Station PR () menu Manual programme Picture PSM { Contrast { Brightness { Colour { Sharpness { Picture { Channel { Search { Name { Booster { { menu Programme Sound Q.VIEW Storage System ()O}{O OKOMENU ()O}{OOKOMENU SSM edit SSM { O0OOCO03 OOO5OOSO69 AVL { O1OOCO03OOO6OOSO17 DBS { O2OOCO12OOO7OOSO22 Balance { O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 DeleteOOOCopy MoveOOOOOSkip ()}{OOKOMENU ()O}{O OKOMENU Sound menu Time Clock { Offotime Onotime { Autoosleep { { ()O}{OOKOMENU Time menu Special Language Input { Childolock { Blueoback { Tilt { Degauss { Game { { ()O}{OOKOMENU Special TV programme 8 with You can move to the higher level menu with OK button and to move to the lower level menu press the G button. Note : a. In the teletext mode, menus are not displayed. b. In some models, the Normal/Turbo search will not display, only the Start will display in the Auto programme menu. c. In mono models, the Sound menu does not appear. d. In some models, Tilt, Degauss, Game or Booster will not disor F Station SOUND pull-down or F/GorD/E. menu 2 Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Note : In some models, up Auto programme to 200 TV stations can tuning { ProgrammeOedit FavouriteOprogramme { { { ()O}{OOKOMENU Press the MENU button to select the Station menu. Press the G button and then D / E button to select Auto pro- gramme. 3. AutoOprogramme ManualOprogramme be stored. All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. 2. Station Press the G button to display the Auto programme menu. POWER MUTE Auto programme System StorageOfrom { { I NormalOsearch { DK TurboOsearch { M BG 1 2 3 4 5 6 7 8 9 0 TV/AV ()O}{OOKOMENU 4. 5. 6. 7. 8. 9. Press the G button. Select a TV system with the D / E button on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the OK or F button. Press the D / E button to select Storage from. Press the G button. Select the beginning programme number with the F / G button or NUMBER buttons on the Storage from pull-down menu. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the OK button. Press the D / E button to select Normal or Turbo search. Option: In some models, you can only TURBO OK () PR VOL VOL PR () select Start. Note : a. Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations. b. If the programmed station has poor quality sound, select the system again in the Manual programme menu. 10. Press the G button to begin auto programming. All receivable stations are stored. Auto programme MENU SOUND I/II SSM Q.VIEW Auto programme System StorageOfrom { NormalOsearch { TurboOsearch { { OOCO01O(BG) 7 System StorageOfrom { NormalOsearch { TurboOsearch { 36% { OOCO01O(BG) 7 36% MENU MENU (Normal search) (Turbo search) To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme. 11. Repeatedly press the MENU button to return to normal TV viewing. 9 Setting up Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { TV stations Auto programme scan To automatically scan the pictures of stored programmes, press theD( DD ) or E( E ) button for about 3 seconds. The picture of stored programmes appears on the screen one by one. E To stop auto programme scanning, Manual programme ()O}{O OKOMENU Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. 2. POWER 2 Press the MENU button to select the Station menu. Press the G button and then D / E button to select Manual programme. MUTE 3. 1 press any button except VCR buttons. tuning Press the G button to 3 4 5 6 7 8 9 0 TV/AV display the Manual programme menu. Manual programme Storage System { Channel { Search { Name { Booster { 2 { ()O}{OOKOMENU MENU SOUND TURBO 4. 5. OK () PR VOL VOL PR () I/II 6. 7. 8. 9. SSM 10. 11. Q.VIEW 12. 13. 14. 15. Press the D / E button to select Storage. Press the G button to select the programme number. Select the desired programme number (0 to 99) with the F / G button or NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the OK button. Press the D / E button to select System. Press the G button. Select a TV system with the D / E button on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the OK or F button. Press the D / E button to select Channel. Press the G button. Press the D / E button to select V/UHF or Cable on the Channel pull-down menu. If possible, select the channel number directly with the number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the OK or F button. Press the D / E button to select Search. Press the G button. Press the F / G button to commence searching on the Search pull-down menu. If a station is found the search will stop. Press the OK button to store it. The display Stored will appear. Manual programme Storage System { Channel { Search { Name { Booster { { {{{ Stored 16. To store another 17. 10 Repeatedly station, repeat steps 4 to 15. press the MENU button to return to normal TV viewing. TV stations Setting up Assigning a station name 1. Repeat the 'Manual programme tuning' steps 2. Press the D / E button to select Name. 3. Press the G button 4. on the Name Press the D button. You and the alphabet can use a With the E button you Select the position by 6. your choice of the second Press the OK button. Repeatedly viewing. blank, menu. AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { can opposite direction. the F / G button and then take character, and ()O}{OOKOMENU so on. press the MENU button to return to normal TV POWER 1 (option) In models, Booster is Booster If the can { +, -, the numeric 0 to 9 select in the pressing Booster some { A to Z. 5. 7. pull-down Station 1 to 3. perform an optional function. Only a MUTE 2 3 4 5 6 7 8 9 0 TV/AV set with this function. is poor at the fringe area of TV signal, select Booster to On. When the picture condition is good, do not select reception MENU SOUND Booster to On. TURBO 2. the 'Manual programme tuning' steps 1 to 3. Press the D / E button to select Booster. 3. Press the G button. 1 4. Repeat Press the D / E button to select On down PR VOL or Off on the Booster OK () VOL PR pull- () menu. 5. Press the OK button. 6. Repeatedly viewing. press the MENU button to return to normal TV I/II SSM Q.VIEW 11 Setting up Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { Programme TV stations edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. ()O}{O OKOMENU 2. Press the MENU button and then D / E button to select the Station menu. Press the G button and then D / E button to select Programme edit. 3. Press the G button to display Programme POWER the Programme edit menu. edit OOOOCO01 OOO5OOSO69 MUTE O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 1 2 3 4 5 6 O4OOSO67OOO9OOCO11 DeleteOOOCopy MoveOOOOOSkip ()}{O OKOMENU 7 8 9 0 TV/AV Deleting 1. 2. TURBO OK PR VOL VOL programme to be deleted with the D / E Press the RED button twice. Copying 1. () programme a The selected programme is deleted, grammes are shifted up one position. MENU SOUND a Select 2. PR a Select all the or F / G button. following pro- programme F / G button. programme to be copied with the D / E Press the GREEN button. or All the one a following programmes are shifted down position. () Moving 1. 2. 3. a programme Select a programme to be moved with the D / E or F / G button. Press the YELLOW button. Move the programme to the desired programme number with theD/EorF/Gbutton. I/II 4. SSM Press the YELLOW button Programme again to release this function. edit OOOOCO01 OOO5OOSO69 O1OOCO03OOO6OOSO17 Q.VIEW O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 MoveOOff ()}{OOMENU Select a programme number programme number to be Skipping a 1. skipped with the D / E or F / G button. 2. 3. Press the BLUE button. The skipped programme turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme, directly tons or Repeatedly 12 enter the programme number with the NUMBER butselect it in the programme edit or table menu. press the MENU button to return to normal TV viewing. Setting up TV stations Favourite programme Station AutoOprogramme ManualOprogramme { This function lets you select your favorite programmes ProgrammeOedit FavouriteOprogramme { directly. 1. Press the MENU button to select the Station 2. Press the G button and then D / E button to select Favourite { { menu. ()O}{O OKOMENU programme. 3. Press the G button to display the Favourite programme menu. Favourite programme AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { 56n Ca 05 { POWER 1 }{O0_9O()OOKOMENU 4. Press the D / E button to select 5. desired programme with the F / G button. To store another programme, repeat steps 4 to 5. 6. Select -- -----. 8. 2 3 4 5 6 7 8 9 0 TV/AV a You 7. can store up to 8 programmes. Press the OK button. Repeatedly viewing. MUTE { press the MENU button to return to normal TV MENU SOUND TURBO OK () PR Repeatedly press the FAVOURITE button to select stored favourite VOL VOL PR programmes. () I/II SSM PSM SLEEP PIP FAVOURITE LIST Q.VIEW TEXT/ PR 13 Setting up TV stations the programme table Calling You can check the programmes stored in the memory the programme table. programme table Press the LIST button to display the by displaying Displaying POWER MUTE Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below. Station OOOOCO01 OOO5OOSO69 1 2 3 4 5 6 7 8 9 0 TV/AV O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 ()}{O OKOMENU Note MENU SOUND TURBO a. OK mode. b. () PR VOL VOL PR : You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit Some programmes with the channel number shown in the programme table indicate there is no station name assigned. a programme in the programme table programme with the D / E or F / G button. Then press the OK button. Selecting () Select a The set switches to the chosen programme number. I/II SSM PSM SLEEP PIP FAVOURITE LIST Paging through a programme table are 10 (or 20) programme table pages which contain 100 (or 200) programmes. Pressing the D / E or F / G button repeatedly turns the pages. There Q.VIEW Press the LIST button to return to normal TV TEXT/ PR 14 viewing. Picture PSM (Picture Status adjustment Picture Memory) Press the MENU button and then D / E button to select the Picture menu. Press the G button to select PSM. 1. 2. Press the G button and then D / E button to select setting on the PSM pull-down menu. 3. a PSM { Contrast { Brightness { Colour { Sharpness { picture ()O}{OOKOMENU Picture PSM { Dynamic Contrast { Standard Brightness { Mild Colour { Game Sharpness { User POWER ()O}OOKOMENU 4. Press the OK 5. Repeatedly viewing. You can or 1 2 3 4 5 6 7 8 9 F button. press the MENU button to return to normal TV also recall a desired picture (Dynamic, Standard, Mild, Game or User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for MUTE good picture reproduction at the factory and cannot be 0 SOUND changed. TURBO Picture adjustment () 1. 2. adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer. can ness OK PR VOL You TV/AV MENU VOL PR () Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select Contrast, Brightness, Colour or Sharpness. Picture PSM Contrast I/II SSM PSM SLEEP PIP FAVOURITE LIST { { Brightness { Colour { Sharpness { 100 EYE/ Q.VIEW TEXT/ ()O}{O OKOMENU 3. Press the G button and then F / G button to make adjustments on the each sub menu. appropriate PR Contrast 80 }{O()OOKOMENU 4. 5. Press the OK button to store it for the picture user. Repeatedly press the MENU button to return to normal TV viewing. 15 Picture adjustment Eye (option) Eye is an optional function. Only a set with eye option perform can this function. In MUTE 1 2 3 4 5 6 7 8 9 0 TV/AV PICTURE MENU models, the to the most POWER set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the suitable picture according to the surroundings. some ing Press the EYE/* button to switch the eye function on or off. Off SOUND OK TURBO/ At this time the ously () VOL PR Note () eye : SSM PSM SLEEP PIP FAVOURITE in If you press the PSM in green does not appear continuappears each time the picture yellow or TURBO PICTURE button with the function, the eye function is automatically switched off. Turbo I/II display display changes. but the condition PR VOL When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. picture selection (option) LIST When this function is on, the EYE/ tinct than normal Q.VIEW Repeatedly picture will be more brilliant and dis- picture. press the TURBO PICTURE button to switch on or off. TEXT/ REVEAL PR (Turbo Picture off) (Turbo Picture on) : If you press the PSM button with the Turbo picture the Turbo picture function is automatically switched off. Note 16 function, Sound adjustment (option) Sound adjustment is an optional function only adjustment can perform this function. SSM You (Sound can Speech 1. 3. set with sound Memory) select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of equalizer. Sound SSM { AVL { DBS { Balance { ()O}{O OKOMENU Press the MENU button and then D / E button to select the Sound 2. Status a menu. Press the G button to select SSM. Press the G button and then D / E button to select ting the SSM on pull-down sound set- a POWER MUTE menu. Sound SSM { Flat AVL { Music DBS { Movie Balance { Speech User { 1 2 3 4 5 6 7 8 9 0 TV/AV ()O}OOKOMENU Sound Press the G button in User to a. MENU SOUND Frequency Adjustment display the User sub menu. TURBO OK () PR VOL VOL PR 0.1O0.5O1.5O5.0O10OkHz ()O}{O OKOMENU ()O}{OOKOMENU (RF STEREO, Flat) b. Select Make c. a (AV STEREO, Flat) sound band appropriate by pressing the F / G button. sound level with the D / E button. d. Press the OK button to store it for the sound User. Repeatedly () 0.1O0.5O1.5O5.0O10OkHz press the MENU button to return to normal TV viewing. I/II SSM/ PSM SLEEP PIP FAVOURITE LIST EYE/ Q.VIEW TEXT/ You can also recall desired a sound (Flat, Music, Movie, Speech or User) with SSM/* button on the remote control. The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. PR If you press the SSM/* button after making appropriate adjustment on the User sub menu, the display User automatically Note : appears even have already set a factory preset setting; Speech. though you Flat, Music, Movie or 17 Sound adjustment (option) Sound Sound SSM { AVL { DBS { Balance { You adjustment adjust balance, AVL (Auto Volume Leveler), DBS or headvolume/sound. AVL automatically keeps on an equal volume level even if you change programmes. If you switch DBS to on, the set creates a dynamic bass sound. The Turbo sound creates an all around sound as in a concert hall. can phone ()O}{OOKOMENU Press the MENU button and then D / E button to select the Sound menu. Press the G button and then D / E button to select the desired sound item; AVL ,DBS or Balance. Press the G button. Make desired adjustment with the F / G, D / E or OK button on each pull-down menu. 1. 2. POWER MUTE 3. 4. Sound 1 2 3 4 5 6 SSM { AVL 7 8 9 0 TV/AV { DBS { Balance { OOO0 }{O OKOMENU MENU SOUND 5. 6. viewing. OK TURBO/ Press the OK button. Repeatedly press the MENU button to return to normal TV () PR VOL VOL PR When this function is on, the sound will be more emphasized and amplified than normal sound. Repeatedly press the TURBO SOUND button to switch on or off. () I/II/ SSM PSM SLEEP PIP FAVOURITE Turbo sound selection (option) LIST EYE/ MEGA TURBO Q.VIEW (Turbo TEXT/ Sound off) (Turbo Sound on) Sound output selection (option) PR In AV mode, you speakers. can select output sound for the left and right loud- press the I/II/* button to select the sound output. Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud- Repeatedly L+R : L+L : R+R 18 : speaker. Audio signal from audio L input is sent to left and right loudspeakers. Audio signal from audio R input is sent to left and right loud-speakers. Sound Stereo/Dual adjustment (option) reception (option) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Mono sound selection In stereo reception if the stereo mono by pressing signal is Display weak, you the I/II/* button twice. In mono can switch to reception the of sound is improved. To switch back to stereo, press the I/II/* button twice again. depth Language selection If for dual language broadcast programme received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* buta ton repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the loud- speakers. DUAL I+II sends NICAM a separate language to each loudspeaker. reception (option) If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II/* button repeatedly. 1. 2. 3. I/II/ When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. 19 Time Time Setting the Clock { OffOtime OnOtime { AutoOsleep { 1. { 2. 3. Setting clock Press the MENU button and then D / E button to select the Time menu. Press the G button to select Clock. Press the G button and then D / E button to adjust the hour. T ime ()O}{OOKOMENU POWER 4. 2 3 4 5 6 7 8 9 0 TV/AV SOUND TURBO 5. 6. Autoosleep { -i-o:o-i- { On/Off timer this function, the set automatically switches on or off at a preset time. You must set the time correctly before using on/off time function. By using MENU 1. OK 2. 3. () { Press the G button and then D / E button to adjust the minute. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Setting the PR VOL { Offotime Onotime ()O}{OOKOMENU MUTE 1 Clock Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to select Off time/On time. Press the G button and then D / E button to adjust the hour. T ime VOL PR () Clock { Offotime Onotime { { -i-o:o-i- Autoosleep { Pr1 Vol 30 On ()O}{OOKOMENU I/II SSM PSM SLEEP PIP FAVOURITE LIST EYE/ Q.VIEW 4. 5. 6. 7. TEXT/ Press the G button and then D / E button to adjust the minute. Only On time function; Press the G button and then D / E button to adjust programme number and volume level. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Note : a. On time works only in standby mode. b. To view the remaining on/off time, select the Time menu. c. When you switch the main power off, the Clock is reset. PR Auto sleep If you select On on the Auto sleep pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. 2. 3. 4. 5. 20 Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to select Auto sleep. Press the G button and then D / E button to select On or Off on the Auto sleep pull-down menu. Press the OK or F button. Repeatedly press the MENU button to return to normal TV viewing. Other functions TV and AV modes Special be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Inputs can Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. Press the MENU button and then D / E Special 2. 3. Language Input { Childolock { Blueoback { Tilt { Degauss { { { Game button to select the ()O}{OOKOMENU menu. Press the G button and then D / E button to select Input. Press the G button and then D / E button to select TV, AV (AV1 or AV2), AV3 (option), S-VIDEO (option) or COMPONENT (option) on the Input pull-down menu. Special POWER Language Input { { TV Childolock { AV1 Blueoback { AV2 Tilt { AV3 Degauss { { COMPONENT Game 1 ()O}OOKOMENU AV AV1 : VCR connected to the Euro scart socket or phone of the set AV2 : VCR connected to the AV2 sockets of the set (option) AV3 : VCR connected to the AV3 sockets of the set (option) S-VIDEO : S-VIDEO socket of VCR connected to the Euro scart socket on the set (option) COMPONENT : DVD Player connected to the COMPONENT sockets on the set (option) Repeatedly press the MENU button to return to normal TV view- MUTE 2 3 4 5 6 7 8 9 0 TV/AV or jack 4. ing. Alternatively you In AV to return to TV MENU SOUND TURBO OK () PR VOL VOL PR () can select the TV or AV mode button. mode, mode, press the by pressing the TV/AV D / E or NUMBER but- tons. Auto AV switching (option) I/II If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is automatically switched to AV or AV1 mode when an AV signal is input. But if you want to keep on watching TV mode, press the D / E or NUMBER buttons. Press the TV/AV button to return to AV modes. SSM Q.VIEW Child lock The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing. 1. Press the MENU button and then D / E Special 2. 3. 4. 5. button to select the menu. Press the G button and then D / E button to select Child lock. Press the G button and then D / E button to select On or Off on the Child lock pull-down menu. Press the OK or F button. Repeatedly press the MENU button to return to normal TV view- ing. With the lock on, the display Child lock on appears on the screen if any button on the front panel is pressed while viewing the TV. Note : The display Child lock on will not appear on the button on the front panel is pressed while displaying the screen if any menus. 21 Other functions Special Blue back Language Input { Childolock { Blueoback { Tilt { Degauss { { Game If you select On appears ground Special 2. 3. 4. 5. POWER 3 on the Blue back pull-down menu, the blue backthe screen when there is no or poor signal. button to select the menu. Press the G button and then D / E button to select Blue back. Press the G button and then D / E button to select On or Off on the Blue back pull-down menu. Press the OK or F button. Repeatedly press the MENU button to return to normal TV viewing. MUTE 2 on Press the MENU button and then D / E 1. ()O}{O OKOMENU 1 (option) { Note : The blue background automatically appears on the screen when there is no signal in AV mode. b. In the Twin picture, PIP, Component mode, the blue background doesn't appear on the screen. a. 4 5 6 7 8 9 0 TV/AV Tilt MENU SOUND TURBO OK () The TV another 1. PR VOL 2. () picture may tilt to the left position. This function can 3. 4. 5. right if the TV set moves to be used to compensate the tilt. or Press the MENU button and then D / E Special VOL PR (option) button to select the menu. Press the G button and then D / E button to select Tilt. Press the G button and then F / G button to adjust the tilt on the Tilt pull-down menu. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. I/II SSM Degaussing (option) SLEEP Q.VIEW Owing to the super large Tube in the set. The colour purity of the picture may be affected by other magnetic influences such as speakers. Stripes may appear on the screen or there may be colour patches. 1. Press the MENU button and then D / E Special 2. 3. Press the G button and then D / E button to select Degauss. Press the G button and then D / E button to select On on the Degauss pull-down 4. Press the OK 5. Repeatedly viewing. or menu. F button. press the MENU button to return to normal TV Note : If you cannot adjust the it again after about 4 minutes. 22 button to select the menu. screen condition by degaussing, try Other functions Games Game is function 1. 2. 3. 4. (option) Special optional function, only a set with game by using the remote control handset. an can perform this Repeatedly press the MENU button to select the Special menu. Press the G button and then D / E button to select Game. Press the G button to enter the game mode. Press the D / E button to select button. You can enjoy the game a by using Language Input { Childolock { Blueoback { Tilt { Degauss { { { Game ()O}{O OKOMENU game and then press the OK the GAME owner's manual. POWER Note : a. Press the TV/AV or 1 viewing. b. If you want the game. a new game, press the RED button to start during 2 3 4 5 6 7 8 9 0 TV/AV timer Sleep You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the MUTE MENU button to return to the normal TV preset time elapses. MENU SOUND TURBO OK Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, play 120, 180 and 240. The timer begins to count down from the number - - () - PR VOL VOL PR of minutes selected. () Note : To view the remaining sleep time, press the SLEEP button once. b. To cancel the sleep time, repeatedly press the SLEEP button until the display appears. c. When you switch the set off, the set releases the preset sleep time. a. - - - I/II SSM SLEEP Q.VIEW 23 PIP operation (option) Option PIP is : an optional function, so that only the set with PIP function operate. can PIP (Picture in Picture) displays a picture within a picture. On and off Press the PIP button to switch on the sub Press this button again to switch it off. mode selection for sub Input pictures. picture Press the INPUT button to select the mode for the sub pic- Each time this button is pressed, each input mode for the sub displayed as shown below at the left upper side of sub picpic- input ture. ture is ture. Programme COMPONENT Swapping number AV (option) Note : When the main available. Programme exchange picture is TV (option) pictures the main and sub or selection for sub (option) AV 3 (option) between main and sub Press the SWAP button to AV 2 AV1 or S-VIDEO AV pictures. modes, the swapping is picture Press the PR +/- buttons to select a programme for the sub picture. (In some models, the sub picture programme selection is available when the sub picture is TV mode.) Sub PIP picture size Repeatedly press the SIZE button to select the desired sub size. The sub picture appears as below. 1/16 size of the main SIZE PR STILL PR POSITION SWAP picture 1/9 size 1/2 size 9/4PIP INPUT : When the sub picture quality might get poor. Note ture Sub picture size is 1/2 of the main picture, Sub or pic- picture. picture position change Press the POSITION button repeatedly until desired achieved. The sub pictures move clockwise. 9 the freeze Press the STILL button to freeze motion of the sub Press this button again to restore motion. 4 sub position is picture Press the 9/4 PIP button 24 picture repeatedly to select 9 or 4 sub pictures. Teletext (option) Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. Teletext is a set free service broadcast by most TV stations which gives information on news, weather, television programmes, share prices and many other topics. a up-to-the-minute The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. 1 2 3 4 5 6 7 8 9 0 TV/AV Switch on/off Press the TEXT or TEXT/* button to switch to teletext. If TV and text picture are displayed half and half of the screen, press the TEXT or TEXT/* button again to display text picture fully. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT (or TEXT/*) or TV/AV button to switch off teletext. The previous mode reappears. OK () PR PR () SIMPLE text Page selection 1. 2. Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number. The D / E button can be used to select the preceding or fol- lowing page. Programming Press the M a colour button in LIST mode button to switch to LIST mode. (option) TEXT/ M Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding coloured button on the remote control handset. 1. Press a coloured button. 2. Using the NUMBER buttons, select the page you wish to pro3. 4. gramme. Press the OK button. Then the selected page is stored as the selected page number with blinking once. From now on, you can select this page with the same coloured button. The three other coloured buttons are programmed in the same way. 25 Teletext TOP text (option) (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. 1 2 3 4 5 6 7 8 9 Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the D button can be used. 4. The red button permits to return to previous selection. Alternatively the E button can be used. Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in 0 TOP mode. FASTEXT () PR The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. PR () Page selection 1. 2. 3. 4. Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The D / E button can be used to select the preceding or fol- lowing i 26 page. Teletext Special (option) teletext functions REVEAL Press this button to display concealed information, such as puzzles. again to remove the information from the solutions of riddles Press this button or display. SIZE Selects double height text. enlarge the top button again to enlarge Press this button to Press this page. Press this button again half of the page. the bottom half of the to return to the normal display. 1 2 3 4 5 6 7 8 9 0 UPDATE Displays the TV picture the on screen teletext page. The display corner of the screen. When the while waiting for the new will appear at the top left hand updated page is available then will change to the page number. Press this button to view the updated teletext page. display () PR PR () HOLD the automatic page Stops text page consists of 2 change which will occur if a tele- sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the or more stop symbol is displayed at the top left-hand corner of the and the automatic page change is inhibited. To continue press this button again. screen MIX Displays the teletext pages superimposed on the TV pic- ? ture. To switch the TV Note picture off press this button When TV and text : picture are again. displayed half and half of the screen, MIX function is not available. TIME When viewing a the time at the button again TV programme, press this button to display corner of the screen. Press this top right hand to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or the sub page, press the NUMBER buttons. change Press again RED/GREEN, D / E or to exit this function. 27 Connection of external You connect additional can equipment equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. ANT IN Y LL PB PR DVD INPUT (480i) COMPONENT OUT AV VIDEO (L/MONO) AUDIO (R) IN Aerial socket 1. VCR 2. 3. 4. ANT IN LL Y PB 5. PR DVD INPUT COMPONENT Connect the RF out socket of the VCR to the aerial socket on the back of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on the programme number 0 using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on the VCR. (480i) OUT AV VIDEO (L/MONO) AUDIO (R) IN Audio/Video in/out sockets 1. VCR 2. 3. R AUDIO L/MON Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set. If the VCR is connected to the AV sockets on the set, press the TV/AV button to select AV (or AV 1), AV 2. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. You VIDEO can also record programmes received out sockets. Euro scart socket 1. 2. VOL the TV on video Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. VCR OK by tape via audio/video AV2 MENU (option) PR /M NO 2 (option) Connect the Euro scart socket of the VCR to the Euro scart socket of the set. Press the PLAY button on the VCR. If your VCR outputs a switching voltage when connected to Euro scart socket, the set will switch to AV (or AV 1) mode automatically. But if you want to keep on watching TV mode, press the D / E or NUMBER buttons. VCR Otherwise press the TV/AV button on the remote control handset to select AV (or AV 1). The VCR playback picture appears on the screen. You can also record programmes received by the TV on video tape. 1 ANT IN VCR 28 Note : Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo CD unit, etc. Connection of external S-video / Audio in sockets When connecting equipment (S-AV) (option) the S-video socket of the VCR to the S-VIDEO socket of the set, the picture quality will be further improved. ANT IN OUT 75Ω VIDEO (L) AUDIO -(R) - IN 1. Connect the S-video socket of the VCR to the S-VIDEO socket 2. of the set. Connect the audio cable from the VCR to the AUDIO sockets of VCR the set. 3. 4. Select AV3 by pressing the TV/AV button Press the PLAY button on the VCR. The VCR playback picture appears on the repeatedly. screen. Note : If both S-VIDEO and VIDEO sockets have been connected to the VCR simultaneously, only the S-VIDEO can be received. ANT IN 75Ω OUT VIDEO AUDIO IN Component 1. or Y B-Y 4. R-Y) of the DVD VCR output sockets (Y Cb Cr, Y player to the COMPONENT INPUT sockets (Y PB PR) on the set. Connect the audio cable from the DVD sockets of AV 3. (option) Connect the COMPONENT video Pb Pr 2. in sockets to AUDIO IN player (or AV1). Press the TV/AV button to select COMPONENT. Press the PLAY button on the DVD player. The COMPONENT Headphone playback picture socket on ANT IN a headphone Y LL AV VIDEO screen. can PR (480i) COMPONENT perform (L/MONO) AUDIO (R) IN DVD socket PB DVD INPUT OUT the (option) models which have Only appears Player this function. Insert the You can headphone plug to the listen to the sound If you press the MUTE switched off. headphone socket of through the headphones. the set. RAUDIO button, the sound from the headphone's is L/MON VIDEO AV2 OK VOL PR L/MONO 2 29 Note Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to these adjust The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?) TV?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets (VCR only) 31
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement