LG | 24LB4500 | LG 24LB4500 Owner’s Manual

OWNER’S MANUAL
*
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LB45**
*MFL68024303*
www.lg.com
P/NO : MFL68024303 (1404-REV00)
Printed in Korea
2
LICENSES / OPEN SOURCE SOFTWARE NOTICE
ENGLISH
ENG
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC,
a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that has passed rigorous testing to verify that it plays DivX video. Visit divx
com for more information and software tools to convert your files into DivX
videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must
be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in
your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and/or remote
control in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a
bathroom
--Near any heat source such as stoves
and other devices that produce heat
--Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
yyDo not place the product where it might
be exposed to dust.
This may cause a fire hazard.
yyMains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
yyDo not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
yyMake sure to connect Mains cable
to compliant AC mains socket with
Grounded earth pin. (Except for devices
which are not grounded on earth.)
Otherwise possibility you may be
electrocuted or injured.
yyInsert power cable plug completely into
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.
yyEnsure the power cord does not come
into contact with hot objects such as a
heater.
This may cause a fire or an electric shock
hazard.
yyDo not place a heavy object, or the
product itself, on power cables.
Otherwise, this may result in fire or
electric shock.
yyBend antenna cable between inside and
outside building to prevent rain from
flowing in.
This may cause water damaged inside
the Product and could give an electric
shock.
ENGLISH
ENG
SAFETY INSTRUCTIONS
3
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyWhen mounting TV onto wall make sure
to neatly install and isolate cabling from
rear of TV as to not create possibility of
electric shock /fire hazard.
yyDispose of used batteries carefully
to ensure that a small child does not
consume them. Please seek DoctorMedical Attention immediately if child
consumes batteries.
yyDo not plug too many electrical devices
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
yyDo not insert any metal objects/
conductors (like a metal chopstick/
cutlery/screwdriver) between power cable
plug and input Wall Socket while it is
connected to the input terminal on the
wall. Additionally, do not touch the power
cable right after plugging into the wall
input terminal. You may be electrocuted.
(Depending on model)
yyDo not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
yyKeep the anti-moisture packing material
or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the
reach of children.
yyDo not let your children climb or cling
onto the TV. Otherwise, the TV may fall
over, which may cause serious injury.
yyDo not put or store inflammable
substances near the product. There
is a danger of combustion/explosion
or fire due to careless handling of the
inflammable substances.
yyDo not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service
centre.
yyDo not spray water on the product or
scrub with an inflammable substance
(thinner or benzene). Fire or electric
shock accident can occur.
SAFETY INSTRUCTIONS
yyNever touch this product or antenna
during a thunder or lighting storm.
You may be electrocuted.
yyNever touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
yyUnplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
yyApparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
yyDo not install this product on a wall if it
could be exposed to oil or oil mist.
This may damage the product and cause
it to fall.
CAUTION
yyDo not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
yyIf any of the following occur, unplug the
product immediately and contact your
local service centre.
--The product has been impacted by
shock
--The product has been damaged
--Foreign objects have entered the
product
--The product produced smoke or a
strange smell
This may result in fire or electric shock.
yyInstall the product where no radio wave
occurs.
yyThere should be enough distance
between an outside antenna and power
lines to keep the former from touching the
latter even when the antenna falls.
This may cause an electric shock.
yyDo not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
ENGLISH
ENG
yyDo not allow any impact, shock or any
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyIf you install the TV on a stand, you need
to take actions to prevent the product
from overturning. Otherwise, the product
may fall over, which may cause injury.
yyDo not place non-rechargeable batteries
in charging device.
yyIf you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of
the product. When you install the set to
use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
yyOnly use the attachments / accessories
specified by the manufacturer.
yySignal from Remote Control can
be interrupted due to external/
internal lighting eg Sunlight, fluorescent
lighting.If this occurs turn off lighting or
darken viewing area.
yyWhen installing the antenna, consult
with a qualified service technician. If not
installed by a qualified technician, this
may create a fire hazard or an electric
shock hazard.
yyWhen connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.
yyWe recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
yyDo not turn the product On/Off by
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.
yyOnly use the specified type of battery.
This could cause damage to the remote
control.
yyPlease follow the installation instructions
below to prevent the product from
overheating.
--The distance between the product and
the wall should be more than 10 cm.
--Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or
cushion.
--Make sure the air vent is not blocked by
a tablecloth or curtain.
Otherwise, this may result in fire.
yyDo not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.
yyBatteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
yyMake sure there are no objects between
the remote control and its sensor.
SAFETY INSTRUCTIONS
yyPeriodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.
yyPrevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.
yyProtect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.
yyDo not press strongly upon the panel
with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it, as
it may cause damage to screen.
yyAvoid touching the screen or holding
your finger(s) against it for long periods
of time. Doing so may produce some
temporary or permanent distortion/
damage to screen.
yyWhen cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
yyAs long as this unit is connected to the
AC wall outlet, it is not disconnected from
the AC power source even if you turn off
this unit by SWITCH.
yyWhen unplugging the cable, grab the
plug and unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power
cord from the power board, as this could
be hazardous.
yyWhen moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
yyWhen moving or unpacking the product,
work in pairs because the product is
heavy.
Otherwise, this may result in injury.
ENGLISH
ENG
yyTake care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
yyContact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
yyRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
yyIf the product feels cold to the touch,
there may be a small “flicker” when it is
turned on. This is normal, there is nothing
wrong with product.
yyThe panel is a high technology display
product with resolution of two million
to six million pixels. You may see tiny
black dots and/or brightly coloured dots
(red, blue or green) at a size of 1 ppm
on the panel. This does not indicate
a malfunction and does not affect the
performance and reliability of the product.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
yyYou may find different brightness and
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is
not malfunction.
yyDisplaying a still image (e.g.,
broadcasting channel logo, on-screen
menu, scene from a video game) for a
prolonged time may cause damage to
the screen, resulting in retention of the
image, which is known as image sticking.
The warranty does not cover the product
for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more
hours for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off
the TV is generated by plastic thermal
contraction due to tempera-ture and
humidity. This noise is common for
products where thermal deformation is
required. Electrical circuit humming/panel
buzzing: A low level noise is generated
from a high-speed switching circuit, which
supplies a large amount of current to
operate a product. It varies depend-ing
on the product.
This generated sound does not affect the
performance and reliability of the product.
ASSEMBLING AND PREPARING
9
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you
are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
Remote control,
batteries (AAA)
Owner’s manual
Cable holder
or
Power Cord
Stand Base
AC-DC Adapter
(Depending on model)
AC-DC Adapter
(Depending on model)
ASSEMBLING AND PREPARING
11
ENGLISH
ENG
Parts and buttons
Screen
Speakers
Joystick button
(* This button is located below the TV
screen.)
Remote control sensor
Power Indicator
yy Lighting On: When Power is turned off
yy Lighting Off: When Power is turned on
NOTE
yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
Using the Joystick button
You can simply operate the TV functions, by pressing to turn ON/OFF or sliding your finger over
joystick button moving up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
Volume
Control
If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.
Programmes
Control
If you place your finger over the joystick button and move it up
or down, you can scrolls through the saved programmes you
want.
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy When your finger is over the joystick button and you are sliding finger forward/back ,left or right,
be careful not to press down to hard on joystick . If you press down hard on joystick button first
then the adjustment of Volume level and programme scroll action will not operate.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items (
) moving the joystick button up, down, left or right.
TV Off
Turns the power off.
Settings
Accesses the main menu.
Close
Clears on-screen displays and returns to TV viewing.
Input List Changes the input source.
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
yy When transporting a large TV, there should
be at least 2 people.
yy When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the
box or packing material that the TV originally
came in.
yy Before moving or lifting the TV, disconnect
the power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
CAUTION
yy When handling the TV, be careful not to
damage the protruding joystick button.
yy Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ENGLISH
ENG
Lifting and moving the TV
13
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
Mounting on a table
Image shown may differ from your TV.
1 Lift and tilt the TV into its upright position on
a table.
-- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
Attaching the stand
1
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
Stand Base
2
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
WARNING
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
yy If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
»» Using cabinets or stands
recommended by the manufacturer
of the television.
»» Only using furniture that can safely
support the television.
»» Ensuring the television is not
overhanging the edge of the
supporting furniture.
»» Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
»» Not standing the televisions on cloth
or other materials placed between
the television and supporting
furniture.
»» Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
ASSEMBLING AND PREPARING
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
We recommend the use of LG’s wall mount
bracket.
When you do not use LG’s wall mount bracket,
please use a wall mount bracket where the
device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
10 cm
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
yy Make sure that children do not climb on
or hang on the TV.
NOTE
yy Use a platform or cabinet that is strong
and large enough to support the TV
securely.
yy Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
VESA (A x B)
22/24LB45**
75 x 75
Standard screw
Number of screws
Wall mount
bracket
28LB45**
100 x 100
M4 X L10
4
LSW140
A
B
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
15
16
ASSEMBLING AND PREPARING / MAKING CONNECTIONS
ENGLISH
ENG
MAKING CONNECTIONS
CAUTION
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the manufacturer’s warranty.
yy Screw length from outer surface of back
cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max.8mm
NOTE
yy Use the screws that are listed on the
VESA standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
yy The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yy For more information, refer to the manual
supplied with the wall mount.
This section on MAKING CONNECTIONS
mainly uses diagrams for the LB45** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB
storage devices, PC, gaming devices, and other
external devices.
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV programme on a
DVD recorder or VCR, make sure to
connect the TV signal input cable to the
TV through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
yy Refer to the external equipment’s manual
for operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yy In PC mode, some resolution settings
may not work properly depending on the
graphics card.
MAKING CONNECTIONS
Adapter Connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
(Depending on model)
ENGLISH
ENG
Antenna Connection
Power Cord
DC-IN
(19V
)
ANTENNA
/ CABLE IN
AC-DC Adapter
or
(*Not Provided)
AC-DC Adapter
NOTE
yy Use a signal splitter to use more than 2
TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
DC-IN
(19V
17
)
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
yy Please be sure to connect the TV to the
AC-DC power adapter before connecting
the TV’s power plug to a wall power
outlet.
18
MAKING CONNECTIONS
ENGLISH
ENG
Other Connections
Connect your TV to external devices. For the best picture and audio quality, connect the external
device and the TV with the HDMI cable as shown. Some separate cable is not provided.
HDMI IN
(MHL)
RGB IN (PC)
COMPONENT IN
DC-IN
(19V
L
)
COMPONENT IN
L
(MONO)
R
RED
WHITE
YELLOW
RED
WHITE
YELLOW
RED
VIDEO
RED
WHITE
RED
L
L
R
(MONO)
WHITE
RED
BLUE
Mobile
phone
BLUE
DVD / Blu-Ray / HD Cable
Box / HD STB / PC
GREEN
or
GREEN
HDMI
R
(MONO)
COMPONENT IN
L
L
ANTENNA
/CABLE IN
L
R
AUDIO
DVD / Blu-Ray / HD
Cable Box
VIDEO
L (MONO) AUDIO R
DVD / Blu-Ray / HD Cable
Box / VCR
MAKING CONNECTIONS
19
AUDIO
IN
(PC)
5V
USB IN
0.5A
ENGLISH
ENG
USB / HDD1
H/P
HDMI IN
(MHL)
RGB IN (PC)
Headphone
DVI OUT
AUDIO OUT
DVD / Blu-Ray / HD Cable
Box / PC
RGB OUT(PC) AUDIO OUT
PC
1 U
SB port supports 0.5A electric current. If you need more electric current in case of HDD, use the
separate power adaptor.
20
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To replace batteries, open
the battery cover, replace batteries (1.5 V AAA) matching the
and
ends to the
label inside the compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyIn Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
TV/
RAD
PIP/
INPUT
AD
SUBTITLE
1
4
7
TV/PC
2
5
8
0
LIST
3
6
9
Q.VIEW
FAV
GUIDE
P
MUTE
TEXT
INFO
SETTINGS
T.OPT
Q.MENU
EXIT
REC/
(POWER) Turns the power on of off.
Selects Radio, TV and DTV programme.
TV/RAD
SUBTITLE Recalls your preferred subtitle in digital mode.
AD By pressing the AD button, audio descriptions function will be
enabled.
PIP/ Turns the PIP mode on or off. (Depending on model)
TV/PC Selects TV or PC mode.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
GUIDE Shows programme guide.
MUTE
Mutes all sounds.
Adjusts the volume level.
P Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
Teletext buttons ( TEXT, T.OPT) These buttons are used for teletext.
INFO Views the information of the current programme and screen.
SETTINGS Accesses the main menus.
Q.MENU Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
Accesses the AV devices connected with the HDMI
cable through HDMI-CEC. Opens the SIMPLINK menu.
REC / Starts to record and displays record menu. (Depending on model)
Control buttons (
) Controls the MY MEDIA menus, or
the SIMPLINK compatible devices (USB,SIMPLINK).
Coloured buttons These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
(Backlight) Adjusts the brightness of the screen by
controlling the screen backlight.
NOTE
yyOn MHEG programme, you cannot adjust the backlight with the yellow or blue key.
yyAD(Audio Description Service ) may not be available on all models and is also dependant on
broadcast service in your country.
SETTINGS
Automatically Setting Up Programme
SETTINGS SETUP Auto Tuning
Automatically tunes the programmes.
yy If Input Source is not connected properly,
programme registration may not work.
yy Auto Tuning only finds programmes that are
currently broadcasting.
yy If Lock System is turned on, a pop-up
window will appear asking for password.
To adjust picture with Picture Wizard
SETTINGS PICTURE Picture Wizard III
[Depending on model]
Calibrates and adjusts for optimum picture
quality using the remote control and the Picture
Wizard without expensive pattern devices or
help from a specialist.
To select Picture Mode
SETTINGS PICTURE Picture Mode
Select the picture mode optimized for the
viewing environment or the programme.
yy Vivid : Heightens contrast, brightness and
sharpness to display vivid images.
yy Standard : Displays images in standard
levels of contrast, brightness and sharpness.
yy Eco/APS : [Depending on model]
The Energy Saver feature changes settings
on the TV to reduce power consumption.
yy Cinema/Game : Displays the optimum
picture for movie, game.
yy Soccer : [Depending on model] Optimised
picture mode for football matches. The pitch
and kits are presented in vibrant colours,
with crystal-clear images even for fast
movements.
Expert : Menu for adjusting picture
yy
quality that allows experts and amateurs
to enjoy the best TV viewing. This is the
adjustment menu provided for ISF-certified
picture tuning professionals. (ISF logo can
only be used on ISF-certified TVs.)
ISFccc: Imaging Science Foundation
Certified Calibration Control
yy Depending on input signal, available range
of picture modes may differ.
Expert mode is for picture tuning
yy
professionals to control and fine-tune using
a specific image. For normal images, the
effects may not be dramatic.
yy The ISF function is only available on some
models.
To set advanced control
SETTINGS PICTURE Picture Mode
Advanced Control / Expert Control
Calibrates the screen for each picture mode; or
adjusts picture settings for a special screen. First
select a Picture Mode of your choice.
yy Dynamic Contrast : Adjusts the contrast to
the optimal level according to the brightness
of the image.
yy Dynamic Colour : Adjusts colours to make
the image appear in more natural colours.
yy Skin Colour : Sets Skin colour spectrum
separately to implement the skin colour as
defined by the user.
yy Sky Colour : Sky colour is set separately.
ENGLISH
ENG
SETTINGS
21
22
SETTINGS
ENGLISH
ENG
yy Grass Colour : Natural colour spectrum
(meadows, hills, etc.) can be separately set.
yy Gamma : Sets the gradation curve according
to the output of picture signal in relation to
the input signal.
yy Colour Gamut : Selects the range of colours
that can be expressed.
yy Edge Enhancer : Shows clearer and
distinctive yet natural edges of the video.
yy Expert Pattern : [Depending on model]
Patterns used for expert adjustment.
yy Colour Filter : Filters a specific colour
spectrum in RGB colours to fine-tune colour
saturation and hue accurately.
yy Colour Temperature : Adjusts the overall
tone of the screen as desired. In Expert
mode, detailed fine-tuning can be set via
Gamma method, etc.
yy Colour Management System : This is
a system that experts use when they
adjust colour with a test pattern. They can
select from six colour areas (Red / Green
/ Blue / Cyan / Magenta / Yellow) without
affecting other colours. For normal images,
adjustments may not result in noticeable
colour changes.
yy Depending on input signal or other picture
settings, the range of detailed items for
adjustment may differ.
To set additional picture options
SETTINGS PICTURE Picture Mode
Picture Option
[Depending on model]
Adjusts detailed setting for images.
yy Noise Reduction : Eliminates noise in the
picture.
yy MPEG Noise Reduction : Eliminates noise
generated while creating digital picture
signals.
yy Black Level : Adjusts the brightness and
contrast of the screen to suit the black level
of the input picture by using the blackness
(black level) of the screen.
yy Real Cinema : Optimizes the screen for
movie viewing.
yy Motion Eye Care / SUPER Energy Saving
: [Depending on model] Saves power
consumption by adjusting the brightness
corresponding to the movement of the image
on the screen.
yy Depending on input signal or other picture
settings, the range of detailed items for
adjustment may differ.
To use TruMotion
SETTINGS PICTURE TruMotion
[Depending on model]
Corrects images to display smoother motion
sequences.
yy Smooth : De-judder/De-blur working on
higher range in auto mode.
yy Clear : De-judder/De-blur working on middle
range in auto mode.
yy User : De-judder / De-blur can be set
manually.
De-judder : This function adjusts juddering of
the screen.
De-blur : This function adjusts and eliminates
blurring of the screen.
Auto means Juddering and blurring range that
depend on input video status is controlled by
TruMotion mode.
To use Energy Saving feature
SETTINGS PICTURE Energy Saving
Reduces power consumption by adjusting
screen brightness.
yy Auto : [Depending on model]
The TV sensor detects the ambient lighting
and automatically adjusts the screen
brightness.
yy Off : Turns off the Energy Saving mode.
yy Minimum / Medium / Maximum : Applies
the pre-set Energy Saving mode.
yy Screen Off : Screen is turned off and only
sound is played. Press any button except
Power button on the remote control to turn
the screen back on.
SETTINGS
To use Headphone
SETTINGS AUDIO Sound Out TV
Speaker
SETTINGS AUDIO Sound Out
Headphone
[Depending on model]
Sound is output through the TV speaker.
[Depending on model]
Sound is output through the headphone
connected to the earphone/headphone port.
To use External Speaker
SETTINGS AUDIO Sound Out External
Speaker (Optical)
[Depending on model]
Sound is output through the speaker connected
to the optical port.
yy SimpLink is supported.
To use Digital Sound Out
SETTINGS AUDIO Sound Out External
Speaker (Optical) Digital Sound Out
[Depending on model]
Sets up Digital Sound Out.
Item
Audio Input
Digital Audio
Ouput
Auto
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCM
All
PCM
To connect and use LG audio device
SETTINGS AUDIO Sound Out LG Sound
Sync (Optical)
[Depending on model]
Connect LG audio device with the
logo to
the optical digital audio output port. LG audio
device allows you to enjoy rich powerful sound
easily.
To synchronize audio and video
SETTINGS AUDIO AV Sync. Adjust
[Depending on model]
Synchronizes video and audio directly when they
do not match.
yy If you set AV Sync. Adjust to ON, you can
adjust the sound output (TV speakers or
SPDIF) to the screen image.
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to
control and manage various multimedia devices
conveniently via the SIMPLINK menu.
1 Connect the TV’s HDMI IN terminal and the
SIMPLINK device’s HDMI output terminal
using an HDMI cable.
yy [Depending on model]
For home theatre units with a SIMPLINK
function, connect HDMI terminals as above,
and use an optical cable to connect Optical
Digital Audio Out from the TV to Optical
Digital Audio In of the SIMPLINK device.
2 Select INPUT(OPTION)  SIMPLINK.
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK
function to ON.
4 In SIMPLINK menu window, selects the
device you want to control.
yy This function is only compatible with devices
with the SIMPLINK logo.
ENGLISH
ENG
To use TV speaker
23
24
SETTINGS
ENGLISH
ENG
yy To use the SIMPLINK function, you need to
use a high-speed HDMI® cable (with CEC
(Consumer Electronics Control) feature
added). High-speed HDMI® cables have
the No. 13 pin connected for information
exchange between devices.
yy If you switch to another input, the SIMPLINK
device will stop.
yy If a third-party device with the HDMI-CEC
function is also used, the SIMPLINK device
may not work normally.
yy [Depending on model]
If you select or play media from a the
device with a home theatre function, the
HT Speaker(Speaker) is automatically
connected.
Be sure to connect with an optical cable (sold
separately) to use the HT Speaker(Speaker)
function.
SIMPLINK function description
yy Direct Play : Plays the multimedia device on
the TV instantly.
yy Select multimedia device : Selects the
desired device via the SIMPLINK menu to
control it from the TV screen instantly.
yy Disc playback : Manages the multimedia
device with the TV remote control.
yy Power off all devices : When you power off
the TV, all connected devices are turned off.
yy Sync Power on : When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, the TV will automatically turn
on.
yy Speaker : [Depending on model]
Select speaker either on the home theatre
unit or the TV.
To set password
SETTINGS LOCK Set Password
Sets or changes the TV password.
The initial password is set to ‘0000’.
To return Factory Reset
SETTINGS  OPTION Factory Reset
All stored information is deleted and TV settings
are reset.
The TV turns itself off and back on, and all
settings are reset.
yy When Lock System is in place, a pop-up
window appears and asks for password
yy Do not turn off the power during initialization.
To remove the USB device
Q.MENU USB Device
Select a USB storage device that you want to
remove.
When you see a message that the USB device
has been removed, separate the device from the
TV.
yy Once a USB device has been selected for
removal, it can no longer be read. Remove
the USB storage device and then re-connect
it.
Using a USB storage device - warning
yy If the USB storage device has a built-in auto
recognition program or uses its own driver, it
may not work.
yy Some USB storage devices may not work or
may work incorrectly.
yy Use only USB storage devices formatted
with the Windows FAT32 or NTFS File
System.
SETTINGS
My Media supporting file
yy Maximum data transfer rate : 20 Mbps (Mega
bit per second)
yy External supported subtitle formats
: *.srt (SubRip), *.smi (SAMI), *.sub
(SubViewer, MicroDVD, DVDsubtitleSystem,
SubIdx(Vobsub)), *.ass/*.ssa (SubStation
Alpha), *.txt (TMplayer), *.psb (PowerDivX)
yy Internal supported subtitle formats: XSUB
(Supports internal subtitles generated from
DivX6)
Supported Video Formats
yy Maximum: 1920 x 1080 @ 30p (only Motion
JPEG 640 x 480 @ 30p)
yy .asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC,
VC1(WMV3, WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3,
AAC, AC3, MP3, 3D WMV Single Stream
yy .divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG1 Layer I, MPEG-1 Layer II, Dolby Digital,
MPEG-1 Layer III (MP3), *DTS
yy .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3), Dolby Digital,
Dolby Digital Plus, AAC, HE-AAC, *DTS
yy .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I,
MPEG- 1 Layer II, DVD-LPCM
yy .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3), *DTS
yy .mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1
Layer III (MP3), *DTS, LPCM
yy motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
yy .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II,
Dolby Digital, LPCM
yy dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
yy flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
yy *rm, *rmvb
[Video] RV30, RV40
[Audio] Dolby Digital, AAC, HE-AAC,
RA6(Cook)
yy 3gp, 3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
*DTS / *rm / *rmvb : Depending on model
ENGLISH
ENG
yy For external USB HDDs, it is recommended
that you use devices with a rated voltage of
less than 5 V and a rated current of less than
500 mA.
yy It is recommended that you use USB
memory sticks of 32 GB or less and USB
HDDs of 1 TB or less.
yy If a USB HDD with power-saving function
does not work properly, turn the power off
and on. For more information, refer to the
user manual of the USB HDD.
yy Data in the USB storage device can be
damaged, so be sure to back up important
files to other devices. Data maintenance
is the user’s responsibility and the
manufacturer is not responsible for data
loss.
25
26
SETTINGS / TO SEE WEB MANUAL
ENGLISH
ENG
Supported Audio Formats
yy File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
yy File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
yy File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
yy File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
yy File Type : WMA
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro
yy File Type : OGG
[Bit rate] Free Format
[Sample freq.] ~ 48 kHz
[Support] OGG Vorvis
Supported Photo Formats
yy Category : 2D (jpeg, jpg, jpe)
[Available file type] SOF0: Baseline,
SOF1 : Extend Sequential,
SOF2 : Progressive
[Photo size] Minimum : 64 x 64,
Maximum : Normal Type: 15360 (W) x 8640
(H), Progressive Type : 1920 (W) x 1440 (H)
yy Category : BMP
[Photo size] Minimum : 64 x 64, Maximum :
9600 x 6400
yy Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum :
Interlace : 1200 x 800, Non-Interlace : 9600
x 6400
yy BMP and PNG format files may be slower to
display than JPEG.
TO SEE WEB MANUAL
To obtain detailed User Guide information,
please visit www.lg.com.
P
C
w
N
so
T
su
W
P
‘N
F
MAINTENANCE / TROUBLESHOOTING
27
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Cannot control the TV
with the remote control.
No image display and no
sound is produced.
The TV turns off
suddenly.
When connecting to the
PC (HDMI/DVI/RGB),
‘No signal’ or ‘Invalid
Format’ is displayed.
Solution
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the
remote control.
yy Check if the batteries are still working and properly installed
(
to ,
to ).
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting
other products.
yy Check the power control settings. The power supply may be
interrupted.
yy Check if the Sleep Timer or Off Time feature is activated in
the TIME settings.
yy If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI/RGB cable.
yy Restart the PC with the TV on.
28
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
22LB45**
24LB45**
22LB4500-TC
22LB4500-TA
24LB4500-TC
24LB4500-TA
507.6 x 355.9 x 135.8
556 x 384.3 x 135.8
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm) 507.6 x 315.7 x 53.1
556 x 343.1 x 53.1
Weight
With stand (kg)
3.1
3.5
Without stand (kg)
2.9
3.3
Power requirement
AC/DC Adapter
19 V
Manufacturer : Lien Chang
Model : LCAP25B
Manufacturer : LG Innotek
Model : PSAB-L204B
Manufacturer : APD
Model : WA-40D19FI, DA-40I19, DA-40E19
In: AC 100 - 240 V ~ 50/60 Hz
Out: DC 19 V
28LB45**
MODELS
28LB4500-TC
28LB4500-TA
Dimensions
(W x H x D)
With stand (mm)
641.5 x 432.0 x 170
Weight
With stand (kg)
4.5
Without stand (kg)
4.2
Without stand(mm) 641.5 x 395.8 x 57.6
Power requirement
AC/DC Adapter
19 V
Manufacturer : Lien Chang
Model : LCAP25B
Manufacturer : LG Innotek
Model : PSAB-L204B
Manufacturer : APD
Model : WA-40D19FI, DA40I19, DA-40E19
In: AC 100 - 240 V ~ 50/60 Hz
Out: DC 19 V
2.1 A
2.1 A
SPECIFICATIONS
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV
(Depend on Country)
Analogue TV
(Depend on Country)
DVB-T
PAL B/B, PAL B/G, PAL D/K, PAL-I
SECAM B/G, SECAM D/K
NTSC-M
VHF, UHF
VHF, UHF, CATV
Television System
Programme Coverage
Maximum number of
storable programmes
DVB-T& Analogue TV : 1,500
External Antenna Impedance
75 Ω
RGB (PC) / HDMI (PC) supported mode
HDMI (DTV) supported mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480
31.469
31.500
59.940
60.000
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Resolution
720 x 400
31.468
70.080
31.469
59.940
37.500
75.000
37.879
60.317
46.875
75.000
48.363
60.004
60.023
75.029
1280 x 800
49.702
59.810
1366 x 768
47.717
59.79
640 x 480
800 x 600
1024 x 768
ENGLISH
ENG
Environment
condition
29
NOTE
yyThe optimal display resolution
--1366 X 768 @60Hz
yyThe optimal timing in each mode is
vertical frequency 60Hz.
720 x 576
31.250
50.000
1280 x 720
37.500
44.960
45.000
50.000
59.940
60.000
1920 x 1080
33.720
33.750
28.125
27.000
33.750
56.250
67.430
67.500
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
30
SPECIFICATIONS
ENGLISH
ENG
Component port connecting information
Component ports on the
TV
Y
Y
PB
PR
Video output ports on
DVD player
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
PB
PR
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(50 Hz / 60 Hz only)
(Only Jordan)
WEEE
Disposal of your appliance
The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin.
For any Suggestion, Opinion,
Complaints, Please Call
800 54 in UAE
0800 54 54 54 in South Africa
080 100 5454 in Morocco
19960 in Egypt
021 36 54 54 in Algeria
Other countries, Please contact
our
local dealer or log into
http://www.lg.com
Record the model number and serial
number of the TV.
Refer to the label on the back cover and
quote this information to your dealer
when requiring any service.
MODEL
SERIAL
(Only DTV)
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2
KEY CODES
ENGLISH
ENG
KEY CODES
• This feature is not available for all models.
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
Note
00
CH +, PR +
R/C Button
53
List
R/C Button
01
CH -, PR -
R/C Button
5B
Exit
R/C Button
02
Volume +
R/C Button
60
PIP(AD)
R/C Button
03
Volume -
R/C Button
61
Blue
R/C Button
06
> (Arrow Key / Right Key)
R/C Button
63
Yellow
R/C Button
07
< (Arrow Key / Left Key)
R/C Button
71
Green
R/C Button
08
Power
R/C Button
72
Red
R/C Button
09
Mute
R/C Button
79
Ratio / Aspect Ratio
R/C Button
0B
Input
R/C Button
91
AD (Audio Description)
R/C Button
0E
SLEEP
R/C Button
7A
User Guide
R/C Button
0F
TV, TV/RAD
R/C Button
7C
Smart / Home
R/C Button
R/C Button
7E
SIMPLINK
R/C Button
10 - 19 * Number Key 0 - 9
1A
Q.View / Flashback
R/C Button
8E
►► (Forward)
R/C Button
1E
FAV (Favorite Channel)
R/C Button
8F
◄◄ (Rewind)
R/C Button
20
Text (Teletext)
R/C Button
AA
Info
R/C Button
21
T. Opt (Teletext Option)
R/C Button
AB
Program Guide
R/C Button
28
Return (BACK)
R/C Button
B0
► (Play)
R/C Button
30
AV (Audio / Video) Mode
R/C Button
B1
ꕗ (Stop / File List)
R/C Button
39
Caption/Subtitle
R/C Button
BA
ꕘ (Freeze / Slow Play /
Pause)
R/C Button
40
Λ (Arrow Key / Cursor Up)
R/C Button
BB
Soccer
R/C Button
41
V (Arrow Key / Cursor
Down)
R/C Button
BD
ꔄ (REC)
R/C Button
42
My Apps
R/C Button
DC
3D
R/C Button
43
Menu / Settings
R/C Button
99
AutoConfig
R/C Button
44
OK / Enter
R/C Button
9F
App / *
R/C Button
45
Q.Menu
R/C Button
4C
List, - (ATSC Only)
R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP
3
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB IN
USB Type
(PC)
(TV)
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product
ID :IN0x2008) USB to serial converter
RS-232C
(CONTROL & SERVICE)
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.
(TV)
(PC)
USB IN
RS-232C With RS232C Cable
(PC)
(TV)
SERVICE ONLY
DE9 (D-Sub 9pin) Type
1
• You need to purchase the RS-232C (DE9, D-Sub
3 9pin female-to-female type) to RS-232C cable required
for the connection between the PC and the TV, which is specified in the manual.
(PC)
2
RS-232C IN
(CONTROL & SERVICE)
(PC)
SERVICE ONLY
1
3
RS-232C IN
(CONTROL & SERVICE)
2
(PC)
(TV)
1
3
(PC)
The connection interface may differ from your TV.
(TV)
2
(TV)
(TV)
1
3
(PC)
RS-232C IN
2
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
(TV)
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
USB USB
IN IN
4
EXTERNAL CONTROL DEVICE SETUP
(PC)
(PC)
(TV)
(TV)
RS-232C IN
(CONTROL
SERVICE)
• You need to purchase the phone-jack to RS-232 cable required
for &the
connection between the PC and
the TV, which is specified in the manual.
RS-232C IN
(PC)
(PC)
(CONTROL & SERVICE)
* For other models, connect to the USB port.
* The connection interface may differ from your TV.
1
3
(PC)
(PC)
1
3
2
2
- or
(TV)
(TV)
(TV)
(TV)
1
3
(PC)
(PC)
SERVICE
ONLY ONLY
SERVICE
ENGLISH
ENG
Phone jack Type
1
3
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)
2
Customer Computer
(TV)
(TV)
RS-232C configurations
3-Wire Configurations(Not standard)
1
5
PC
RXD
RS-232C IN
(CONTROL & SERVICE)
TXD
RS-232C IN
(CONTROL & SERVICE)
GND
6
2
2
TXD
3
1
RXD
5
3
GND
OR
9
RS-232C
(Serial port)
TV
RXD
3
2
TXD
TXD
2
1
RXD
GND
5
3
GND
D-Sub 9
Phone
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
* (Depending on model)
EXTERNAL CONTROL DEVICE SETUP
5
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
ENGLISH
ENG
Communication Parameters
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power*
k
a
00 to 01
02. Aspect
Ratio
k
c
(p.7)
03. Screen
Mute
k
d
(p.7)
k
e
00 to 01
k
f
00 to 64
06. Contrast
k
g
00 to 64
07.
Brightness
k
h
00 to 64
08. Color/
Colour
k
i
00 to 64
04. Volume
Mute
05. Volume
Control
09. Tint
k
10.
k
Sharpness
11. OSD
k
Select
12. Remote
Control Lock k
Mode
j
00 to 64
k
00 to 32
l
00 to 01
m
00 to 01
13. Treble
k
r
00 to 64
14. Bass
k
s
00 to 64
COMMAND1 COMMAND2
DATA
(Hexadecimal)
15. Balance k
16. Color
(Colour)
x
Temperature
17. ISM
Method (Only j
Plasma TV)
t
00 to 64
u
00 to 64
p
(p.8)
18. Equalizer j
v
(p.8)
q
00 to 05
a
(p.9)
b
00 to 01
19. Energy
j
Saving
20. Tune
m
Command
21. Channel m
(Programme)
Add/Del(Skip)
22. Key
m
c
Key Codes
23. Control
Backlight,
Control Panel
Light
24. Input
select (Main)
25. 3D (Only
3D models)
26. Extended
3D (Only 3D
models)
27. Auto
Configure
m
g
00 to 64
x
b
(p.11)
x
t
(p.11)
x
v
(p.11)
j
u
(p.12)
* Note:During playing or recording media, all commands except Power (ka) and Key (mc) are not
executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID]
:You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return - ASCII code ‘0x0D’
[ ]
: Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
01 : Step 1 (Set ID 1)
...
0A : Step 10 (Set ID 10)
...
0F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
...
32 : Step 50 (Set ID 50)
33 : Step 51 (Set ID 51)
...
63 : Step 99 (Set ID 99)
...
C7 : Step 199
C8 : Step 200
...
FE : Step 254
FF : Step 255
...
01 00 : Step 256
...
27 0E : Step 9998
27 0F : Step 9999
...
EXTERNAL CONTROL DEVICE SETUP
7
01.Power (Command: k a)
►► To control Power *On or Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : *Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][Data][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.
02.Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen 07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
02 : Wide screen
Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
(Latin America
(Europe, Colombia, Midexcept Colombia
East, Asia except South
Only)
Korea and Japan)
06 : Set by Program/ 10 to 1F : C
inema Zoom 1
Original
to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04.Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05.Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06.Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.
07.Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
03.Screen Mute (Command: k d)
►► To select screen mute on/off.
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
08.Color/Colour (Command: k i)
►► To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
ENGLISH
ENG
* Commands may work differently depending on model and signal.
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Data Min : 00 to Max : 64
* (Depending on model)
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
09.Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10.Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
14. Bass (Command: k s)
►► To adjust Bass.
You can also adjust in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)
15.Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
16.Color(Colour) Temperature (Command: x u)
11.OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
►► To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
17.ISM Method (Command: j p) (Only Plasma TV)
12.Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
01 : Lock on
►► To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
08: Normal
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.
18.Equalizer (Command : j v)
►► Adjust EQ of the set.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
0
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
0
0
0
0
Frequency
13. Treble (Command: k r)
►► To adjust treble.
You can also adjust in the AUDIO menu.
LSB
0
0
0
Data
7
6
5
Frequency
4
3
2
1
0
Step
0
0
0
1st Band
0
0
0
0
0
0(decimal)
0
0
1
2nd Band
0
0
0
0
1
1(decimal)
0
1
0
3rd Band
...
...
...
...
...
...
0
1
1
4th Band
0
0
0
1
1
19(decimal)
EXTERNAL CONTROL DEVICE SETUP
0
0
5th Band
0
0
1
0
1
20(decimal)
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
* It depends on model, and can adjust when sound
mode is EQ adjustable value.
19.Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto (For LCD TV / LED TV) /
Intelligent sensor (For PDP TV)
05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2.Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Antenna TV = 10
Result = ma 00 00 01 10
3.Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except
Colombia Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
20.Tune Command (Command: m a)
* This command may work differently depending on
model and signal.
• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
* Analog Antenna/Cable
[Data 00][Data 01] Channel Data
Data00 : High byte channel data
Data01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analog)
- 00 : Antenna TV (ATV)
- 80 : Cable TV (CATV)
* Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data00 : High Channel data
Data01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data02 : Input Source (Digital)
- 10 : Antenna TV (DTV)
- 20 : Antenna Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
* Tune Command Examples:
1.Tune to the Analog antenna (PAL) Channel 10.
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.
* Analog Antenna/Cable
Data00 : Physical Channel Number
- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data01 & 02: xx (Don't care)
Data03 & 04: xx (Don't care)
Data05: Input Source (Analog)
- 00 : Antenna TV (ATV)
- 01 : Cable TV (CATV)
* Digital Antenna/Cable
Data00 : xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data01 : High byte Channel Data
Data02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data03 : High byte Channel Data
Data04 : Low byte Channel Data
Data05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use Physical Channel
Number
- 06 : Cable TV (CADTV) – Use Physical Channel
ENGLISH
ENG
1
9
10 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Number
- 22 : Antenna TV (DTV) – Don’t Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number
- 46 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
* Tune Command Examples:
1.Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01
2.Tune to the digital antenna (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Data 05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02
2.Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
21.Channel(Programme) Add/Del(Skip)
(Command: m b)
►► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
22.Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
* Digital Antenna/Satellite
Data 00: xx (Don't care)
DataKey code - p.2.
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
23.Control Backlight (Command: m g)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
01 : Add
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
• For LCD TV / LED TV
►► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)
• For Plasma TV
►► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
►► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
O
01
X
X
X
02
X
X
X
03
X
O
O
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
21 : AV2
40 : Component1
60 : RGB
41 : Component2
90 : HDMI1
92 : HDMI3
91 : HDMI2
93 : HDMI4
26.Extended 3D(Command: x v) (only 3D models)
(Depending on model)
►► To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
25.3D(Command: x t) (only 3D models)
(Depending on model)
►► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
* (Depending on model)
DataStructure
[Data 00]00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01]00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02]00 : Right to Left
01 : Left to Right
[Data 03]3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
* [Data 02], [Data 03] functions depend on model
and signal.
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03 (2D to 3D), [Data 01] and
[Data 02] have no meaning.
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only.
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
[Data 02]
O
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
20 : AV or AV1
[Data 01]
O
X : don’t care
[Data 00]
00
[Data 03]
[Data 00]3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
[Data 01]It has own range for each 3D option
determined by [Data 00].
1) When[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When[Data 00] is 01, 02
DataMin: 0 - Max: 14 (*transmit by Hexadecimal
code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
* This option works when 3D Mode (Genre) is manual
only.
3) When[Data 00] is 06, 07
00 : Off
01 : On
4) When[Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
converted 2D video
01 : Change 3D video to 2D video, except
2D-to-3D video
* If conversion condition doesn’t meet, command is
treated as NG.
5) When [Data 00] is 09
00 : Standard
02 : Cinema
04 : Manual
01 : Sport
03 : Extreme
05 : Auto
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]
ENGLISH
ENG
24.Input select (Command: x b)
(Main Picture Input)
11
12 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
27.Auto Configure (Command: j u)
(Depending on model)
►► To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Download PDF

advertising