LG AK-Q1808C0A Owner’s Manual

1,MFL67445913, 17. 8. 2. 3:59 Page 1
ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
SINGLE PACKAGE TYPE AIR CONDITIONER
www.lg.com
P/NO : MFL67445913
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
1,MFL67445913, 17. 8. 2. 3:59 Page 2
Single Package Air Conditioner Owner’s Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Safety Precautions ..............3
Write the model and serial numbers here:
Model #
Serial #
Prior to Operation................6
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
Operating Instructions........7
Care and Maintenance ......25
Before You Call
for Service..........................27
n Staple your receipt to this page in the event you need it
to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for
service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
• Installation work must be performed in accordance
with the National Electric Code by qualified and
authorized personnel only.
2 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 3
Safety Precautions
WARNING
This symbol indicates the possibility of death or serious injury.
CAUTION
This symbol indicates the possibility of injury or damage.
n Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
n Installation
Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.
For electrical work, contact
the dealer, seller, a qualified
electrician, or an Authorized
Service Center.
Always ground the product.
• There is risk of fire or electric
shock.
• Do not disassemble or repair the
product. There is risk of fire or
electric shock.
• There is risk of fire or electric
shock.
Install the panel and the
cover of control box
securely.
Always install a dedicated
circuit and breaker.
Use the correctly rated
breaker or fuse.
• There is risk of fire or electric
shock.
Use the specified wires to
connect the unit.
• There is risk of fire or electric
shock.
For installation, always
contact the dealer or an
Authorized Service Center.
• There is risk of fire, electric shock,
explosion, or injury.
• Improper wiring or installation may
cause fire or electric shock.
Do not install, remove, or reinstall the unit by yourself
(customer).
• There is risk of fire, electric shock,
explosion, or injury.
Do not install the product on
a defective installation stand.
• It may cause injury, accident, or
damage to the product.
• There is risk of fire or electric
shock.
Be cautious when unpacking
and installing the product.
• Sharp edges could cause injury.
Be especially careful of the case
edges and the fins on the
condenser and evaporator.
Be sure the installation area
does not deteriorate with
age.
• If the base collapses, the air
conditioner could fall with it,
causing property damage, product
failure, and personal injury.
Owner's Manual 3
ENGLISH
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
1,MFL67445913, 17. 8. 2. 3:59 Page 4
Safety Precautions
n Operation
Do not let the air conditioner
run for a long time when the
humidity is very high and a
door or a window is left open.
• Moisture may condense and wet
or damage furniture.
Do not plug or unplug the
power supply plug during
operation.
• There is risk of fire or electric
shock.
Do not allow water to run
into electric parts.
• It may cause There is risk of fire,
failure of the product, or electric
shock.
When flammable gas leaks,
turn off the gas and open a
window for ventilation before
turn the product on.
• Do not use the telephone or turn
switches on or off. There is risk of
explosion or fire.
Do not open the panel of the
product during operation. (Do
not touch the electrostatic filter,
if the unit is so equipped.)
• There is risk of physical injury,
electric shock, or product failure.
Take care to ensure that
power cable could not be
pulled out or damaged
during operation.
• There is risk of fire or electric
shock.
Do not place anything on the
power cable.
• There is risk of fire or electric
shock.
Do not touch(operate) the
product with wet hands.
Do not place a heater or
other appliances near the
power cable.
• There is risk of fire or electrical
shock.
• There is risk of fire and electric
shock.
Do not store or use flammable
gas or combustibles near the
product.
• There is risk of fire or failure of
product.
If strange sounds, or small or
smoke comes from product. Turn
the breaker off or disconnect the
power supply cable.
• There is risk of electric shock or
fire.
When the product is soaked
(flooded or submerged),
contact an Authorized
Service Center.
• There is risk of fire or electric
shock.
Ventilate the product from time to time when
operating it together with a stove, etc.
• There is risk of fire or electric shock.
When the product is not be used for a long
time, disconnect the power supply plug or
turn off the breaker.
• There is risk of product damage or failure, or
unintended operation.
4 Single Package Air Conditioner
Do not use the product in a
tightly closed space for a
long time.
• Oxygen deficiency could occur.
Stop operation and close the window
in storm or hurricane. If possible,
remove the product from the window
before the hurricane arrives.
• There is risk of property damage,
failure of product, or electric shock.
Be cautious that water could
not enter the product.
• There is risk of fire, electric shock,
or product damage.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of electric shock.
Take care to ensure that nobody could step
on or fall onto the unit.
• This could result in personal injury and product
damage.
1,MFL67445913, 17. 8. 2. 3:59 Page 5
Safety Precautions
ENGLISH
CAUTION
n Installation
Always check for gas
(refrigerant) pressure after
installation or repair of product.
• Low refrigerant levels may cause
failure of product.
Do not install the product
where the noise or hot air
from the outdoor unit could
damage the neighborhoods.
• It may cause a problem for your
neighbors.
Install the drain hose to
ensure that water is drained
away properly.
• A bad connection may cause
water leakage.
Don't use people to lift and
transport the product.
• Avoid personal injury.
Keep level even when
installing the product.
• To avoid vibration or water
leakage.
Do not install the product
where it will be exposed to
sea wind (salt spray) directly.
• It may cause corrosion on the
product. Corrosion, particularly on
the condenser and evaporator fins,
could cause product malfunction or
inefficient operation.
n Operation
Do not expose the skin directly to cool air for
long periods of time. (Don't sit in the draft.)
• This could harm to your health.
Do not use the product for special purposes,
such as preserving foods, works of art, etc. It
is a consumer air conditioner, not a precision
refrigeration system.
• There is risk of damage or loss of property.
Do not block the inlet or
outlet of air flow.
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
• It may cause product failure.
• There is risk of fire, electric shock,
or damage to the plastic parts of
the product.
Do not step on or put
anything on the product.
(outdoor units)
• There is risk of personal injury and
failure of product.
Always insert the filter securely.
Clean the filter every four weeks
or more often if necessary.
• A dirty filter reduces the efficiency
of the air conditioner and could
cause product malfunction or
damage.
Do not drink the water drained from the
product.
• It is not sanitary and could cause serious health
issues.
Do not touch the metal parts of
the product when removing the
air filter. They are very sharp!
• There is risk of personal injury.
Do not insert hands or other objects
through the air inlet or outlet while
the product is operated.
• There are sharp and moving parts
that could cause personal injury.
Use a firm stool or ladder when cleaning or
maintaining the product.
• Be careful and avoid personal injury.
Owner's Manual 5
1,MFL67445913, 17. 8. 2. 3:59 Page 6
Prior to Operation
Prior to Operation
Preparing for Operation
1. Contact an installation specialist for installation.
2. Use a dedicated circuit breaker.
Usage
1. Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose
occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating
devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision devices, food, pets,
plants, and art objects). Such usage could damage the items.
Cleaning and Maintenance
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal
edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation, leading to
possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high
speed during operation. There is a possibility of injury if the unit’s power is accidentally triggered on while
cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
6 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 7
Operating Instructions
ENGLISH
Operating Instructions
Name and Function of Wired Remote Controller
1
8
7
9
10
11
12
13
15
14
2
4
5
6
3
Please attach the inform label inside of the door.
Please choose proper language depend on your
country.
1 OPERATION INDICATION
SCREEN
2 SET TEMPERATURE BUTTON
3 FAN SPEED BUTTON
4 ON/OFF BUTTON
5 OPRATION MODE SELECTION
BUTTON
6 WIRELESS REMOTE
CONTROLLER RECEIVER
7 AIR FLOW BUTTON
8 SUBFUNCTION BUTTON
9 FUNCTION SETTING BUTTON
10 VENTILATION BUTTON
11 RESERVATION
12 UP,DOWN,LEFT,RIGHT BUTTON
• To check the indoor temperature,
press
button.
13 ROOM TEMPERATURE BUTTON
14 SETTING/CANCEL BUTTON
15 EXIT BUTTON
Owner's Manual 7
1,MFL67445913, 17. 8. 2. 3:59 Page 8
Operating Instructions
Standard Operation - Standard Cooling
It cools the room by comfortable and clean wind.
1 Press
indoor.
button to turn on the
button to select
2 Press
Cooling operation mode.
the desired temperature by
3 Adjust
pressing
buttons.
Press
button to check the
Room temperature.
When setting the desired
temperature higher than room
temperature, only ventilation wind is
blow out instead of cooling wind.
h Setting Temp Range : 20˚C~30˚C (68˚F~86˚F)
Standard Operation - Dehumidification Mode
It removes humidity while air-cooling weakly.
1 Press
indoor.
button to turn on the
button to select
2 Press
Dehumidification mode.
The temperature setting can not be
adjusted during operation this mode.
the
button to select
3 Press
air flow High (It is possible to
select only air flow high)
• In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
8 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 9
Operating Instructions
ENGLISH
Standard Operation - Fan Mode
It blows the air as it is in the indoor, not the cold wind.
1 Press
indoor.
button to turn on the
2 Press
Mode.
button to select Fan
the
button to select air
3 Press
flow High (It is possible to select only
air flow high)
• Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
Standard Operation - Heating Mode
It supplies warm wind to the indoor
button to turn on the
1 Press
indoor unit.
button to select
2 Press
Heating mode.
(To check the indoor temperature,
press the room temperature button.)
the desired temperature
3 Adjust
by pressing
buttons.
When setting the desired
temperature lower than room
temperature, there is only
ventilation wind.
• Heating drive only operates for the heating and cooling models.
• Heating does not operate at cooling exclusive model.
Owner's Manual 9
1,MFL67445913, 17. 8. 2. 3:59 Page 10
Operating Instructions
Standard Operation - Temperature Setting/Room Temperature Check
Temperature Setting
can simply adjust the desired
1 We
temperature.
• Press the
buttons to adjust the
desired temperature.
: Increase 1˚C per one time
pressing
: Decrease 1˚C per one time
pressing
• Room temp: Indicate the current room
temperature.
• Set temp: Indicate the temperature that user
want to set.
Cooling operation:
- The cooling mode doesn't work if
desired temperature is higher than room
temperature Please lower the desired
temperature.
Room Temperature Check
press
button, the room
1 Whenever
temperature will be displayed within 5
seconds.
After 5 seconds, it turns to display the
desired temperature.
Because of location of remote controller,
the real room temperature and the this
displayed value can be different
• For air-cooling drive, from 20°C to 30°C, you can select desired temperature.
• 5°C is proper for the difference between room and outside temperature.
10 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 11
Operating Instructions
pressing
1 Repeatedly
until
icon flash.
button
on/off HUMIDIFIER by
2 Turn
pressing
button (The icon
will be displayed in case of
SETTING option and disappear
in reverse case .)
button to exit.
3 Press
❈ After setup, it automatically gets
out of setup mode if there is no
button input for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
• We provide only function to control Humidifier on/off.
• If the operation mode is changed , Humidifier is off.
• It can only be set when the product is operated standard cooling, fan mode and electric heater
mode
• It is impossible to select this mode during operating dehumidification mode.
Owner's Manual 11
ENGLISH
Sub Function - Humidifier
1,MFL67445913, 17. 8. 2. 3:59 Page 12
Operating Instructions
Sub Function - Electric Heater (Accessory)
It supplies warm wind by using electric heater.
pressing
1 Repeatedly
until
icon flash.
button
on/off ELECTRIC HEATER
2 Turn
by pressing
button (the
icon will be displayed in case of
SETTING option and disappear
in reverse case .)
button to exit.
3 Press
❈ After setup, it automatically
gets out of setup mode if there
is no button input for 25
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.
• Electric Heater is heating function on this product.
• It can only be set when product operation is off.
• If the electric heater mode is operated first, It can be set heating operation and desired
temperature is 30℃
12 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 13
Operating Instructions
ENGLISH
Function Setting - Child Lock
It is the function to use preventing children or others from careless using.
button repeatedly until
1 Press
the
is flashing.
moving to 'setup' icon area by
2 Ifusing
button, 'setup' icon
blinks, and child lock function is
setup if pressing
button at
that time.
cancelling lock function, if moving
3 When
to 'cancel' icon by pressing
button
and then, pressing
button, child lock
function is cancelled.
button to exit.
4 Press
❈ After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
Owner's Manual 13
1,MFL67445913, 17. 8. 2. 3:59 Page 14
Operating Instructions
Function Setting - Filter Sign Clear
This function is to clear the indicator of indoor filter cleaning.
1 Press
until the
button repeatedly
is flashing.
the
is flashing, press
2 When
the
to clear this display
• When filter is covered by dust, it will reduce cooling/heating efficiency and accumulate more
electric power. Therefore, do clean the filter whenever cleaning time is expired.
h Filter cleaning indication is automatically cancelled without the separate cancellation after certain
period of time.
14 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 15
Operating Instructions
press function setup
1 Please
button. If pressing function setup
button repeatedly, it moves to
time setup menu. ‘Time setup’
icon is indicated at that time and date
blinks at current time indication area.
Ex) Changing Current Time as
'Monday / AM 10:20'.
2 Press
day.
key to adjust the current
key to move to AM/ PM setting
3 Press
mode (the 'AM/ PM segment will flash).
AM/ PM value by
4 Setting
pressing
button.
button to move to 'Hour'
5 Press
setting mode. (the 'Hour' segment will
flash)
Hour value by pressing
6 Setting
button.
Owner's Manual 15
ENGLISH
Function Setting - Changing Current Time
1,MFL67445913, 17. 8. 2. 3:59 Page 16
Operating Instructions
button to move to 'Minute'
7 Press
setting mode. (the 'Minute' segment will
flash)
Minute value by pressing
8 Setting
button.
9 Press
10
16 Single Package Air Conditioner
button to finish.
In the process, press
button to release and exit
from setting mode.
(In case of exit with
incomplete information, it will return to
the previous setting)
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
1,MFL67445913, 17. 8. 2. 3:59 Page 17
Operating Instructions
You can set the reservation conveniently in the units of 1 hour from 1 hour to 7 hours.
button to enter the
1 Press
Programming mode.
(the
segment flashing)
Ex) Setting Simple Reservation
time as '3'.
2 Press
time.
3 Press
button to adjust reservation
button to finish setting.
button to exit.
4 Press
❈ After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
h When simple reservation setup, product automatically runs or stops after the time that is set.
Owner's Manual 17
ENGLISH
Programming - Simple Reservation
1,MFL67445913, 17. 8. 2. 3:59 Page 18
Operating Instructions
Programming - ON Reservation
Automatically turned On at reserved time that you set.
1 Press
button.
Ex) Setting ON Reservation
Time as 'AM 10:20'.
pressing
button to
2 Repeat
enter the ON reservation
setting mode.
( segment flashing)
3 Press
setting.
button to adjust AM/ PM
button to Hour setting
4 Press
mode. When the Hour icon flash, please
setting time.
The setting range is within 1~12.
button to shift to Minute
5 Press
setting mode. When the Minute icon
flash, please setting minute the setting
range is within 00~59.
6 Press
18 Single Package Air Conditioner
button to finish setting.
1,MFL67445913, 17. 8. 2. 3:59 Page 19
Operating Instructions
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
- If reservation is set, 'turned on'
indication shows up at the lower part
of LCD screen, and air-conditioner
product runs at the time that is set.
- If reservation is cancelled, 'turned on'
indication disappears.
Owner's Manual 19
ENGLISH
button to exit.
7 Press
❈ After setup, it automatically gets out of
1,MFL67445913, 17. 8. 2. 3:59 Page 20
Operating Instructions
Programming - OFF Reservation
Automatically turned Off at reserved time that you set.
1 Press
button.
Ex) Setting OFF Reservation
Time as 'AM 10:20'.
pressing
button
2 Repeatedly
to enter the OFF reservation
setting mode.
( segment flashing)
3 Press
setting.
button to adjust AM/ PM
button to shift to Hour
4 Press
setting mode. When the Hour icon flash,
please setting time.
The setting range is within 1~12.
button to shift to Minute
5 Press
setting mode. When the Minute icon
flash, please setting minute the setting
range is within 00~59.
6 Press
20 Single Package Air Conditioner
button to finish setting.
1,MFL67445913, 17. 8. 2. 3:59 Page 21
Operating Instructions
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
- If reservation is set, 'turned off'
indication shows up at the lower part
of LCD screen, and air-conditioner
product runs at the time that is set.
- If reservation is cancelled, 'turned off'
indication disappears.
Owner's Manual 21
ENGLISH
button to exit.
7 Press
❈ After setup, it automatically gets out of
1,MFL67445913, 17. 8. 2. 3:59 Page 22
Operating Instructions
Programming : Weekly Reservation
You can set the daily reservation in weekly unit.
Weekly reservation keeps operating until before you cancel it once you setup
1
Please move to reservation setup mode by pressing reservation button.
❈ You can setup two weekly reservations for one day, and up to fourteen
reservations for a week.
For example, to setup (Tuesday morning 11:30 turned on ~ afternoon 12:30
turned off), you setup in order below.
move to 'WEEKLY' by
2 Please
repeatedly pressing reservation
button. 'WEEKLY' blinks at this time.
select weekly reservation ‫ڸ‬
3 Please
or weekly reservation ‫ ڹ‬by using
button.
❈ You can setup two reservations,
weekly reservation 1 and weekly
reservation 2, for a day.
move to 'date' setup part by
4 Please
using
button. If 'date'
indication blinks, please setup date.
You can setup date from Monday to
Sunday.
move to 'AM/PM' setup part
5 Please
of turning on by using
button.
move to 'hour' setup part of
6 Please
turning on by using
button.
- It is the part to setup the time at
which air-conditioner is turned on.
change time by using
button.
7 Please
- You can setup hour 0~12.
8 Please move to 'minute' setup part of turning on by using
9 If 'minute' indication blinks, please setup 'minute' by using
22 Single Package Air Conditioner
button.
button
1,MFL67445913, 17. 8. 2. 3:59 Page 23
Operating Instructions
ENGLISH
move to 'AM/PM' setup part
10 Please
of turning off by using
button.
- AM/PM setup is identical with
turning on time setup.
11
Please move to 'hour' setup part
of turning off by using
button.
- It is the part to reserve the time
at which air-conditioner is
turned off.
- If 'hour' indication blinks, please
setup 'hour'.
❈ Please setup 'hour' and 'minute'
identically with the method to
setup turning on time.
finishing weekly reservation setup, please press setup/cancellation button.
12 IfWeekly
reservation setup for the day that you set is finished.
you setup with the method identical with above by selecting the day that
13 Ifyou'd
like to setup, it operates weekly reservation.
If you setup both turning on reservation time and turning off reservation time
identically, it doesn't operate reservation drive.
Weekly reservation explanation
Reservation
number
Turning off time
Turning on time
Under bar: the indication that there is weekly reservation for
corresponding day
Owner's Manual 23
1,MFL67445913, 17. 8. 2. 3:59 Page 24
Operating Instructions
Programming : Holiday Reservation
It automatically stops at reserved day that you set.
press
button.
1 Please
It enters into reservation
setup mode.
move to 'holiday' by repeatedly
2 Please
pressing
button.
move to 'date' that
3 Please
you want to setup holiday
by using
button.
or cancel holiday by using
4 Pleaseorappointbutton.
For example, when you setup
Monday/Friday to holiday
- 'Monday', 'Friday' letter disappears.
press
5 Please
holiday setup.
button if finishing
❈ If it comes to appointed holiday,
air-conditioner automatically stops.
Once you setup holiday appointment,
until before you cancel holiday setup,
air-conditioner automatically stops
within one hour even though you run
air-conditioner.
24 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 25
Care and Maintenance
ENGLISH
Care and Maintenance
CAUTION
Before performing any maintenance, turn off the main power to the system.
You can do some of the periodic maintenance for your unit yourself; this includes cleaning air filters, cleaning unit
cabinet, clearing the condenser coil, and conducting a general unit inspection on a regular basis.
WARNING
Before removing access panels to service unit, disconnect power supply. Failure to disconnect power before attempting any
servicing can result in severe injury or death.
This product has anti-bacteria washable filters. It is very important to keep air filters clean in the central duct
system. Be sure to inspect them at least once each month when the system is in constant operation. (In new
buildings, check the filters every week for the first 4 weeks.)
Washable type filters can be cleaned by washing with a mild detergent and water. Ensure that the filters are
thoroughly dried before reinstalled them in the unit (or duct system).
Unfiltered air circulates through the unit's condenser coil and can cause the coil's surface to become clogged with
dust, dirt, etc.. To clean the coil, vertically (i.e., along the fins) stroke the coil surface with a soft bristled brush.
Keep all vegetation away from the condenser coil area.
Maintenance Performed by Serviceman-Cooling Season
To keep your unit operating safely and efficiently, the manufacturer recommends that a qualified serviceman
check the entire system at least once each year, or more frequently if conditions warrant. Your serviceman may
examine these areas of your unit:
1. Filters (for cleaning)
2. Motors and drive system components
3. Condenser coils (for cleaning)
4. Safety controls (for mechanical cleaning)
5. Electrical components and wiring (for possible replacement or connection tightness)
6. Condensate drain (for cleaning)
7. Inspect the unit duct connections to ensure they are physically sound and sealed to the unit casing.
8. Inspect the unit mounting support to see that it is sound.
9. Inspect the unit to ensure there is no obvious deterioration.
Maintenance Performed by Serviceman-Heating Season
Complete the unit inspections and service routines described below at the beginning of each heating season.
• Inspect the controller panel wiring to verify that all electrical connections are tight and that wire insulation is
intact.
Owner's Manual 25
1,MFL67445913, 17. 8. 2. 3:59 Page 26
Care and Maintenance
When the air conditioner is not going to be used for a long time.
When air conditioner is not going to be used for a long time.
1. Operate the air conditioner on air circulation mode for 2 to 3 hours.
• This will dry out the internal parts.
2. Turn off the circuit breaker.
CAUTION
Turn off the circuit breaker when the air conditioner is not going to be used for a long time. Dirt may collect and may cause a
fire.
When the air conditioner is to be used again.
1. Clean the air filter and re-install it in the indoor side.
On the fillter access panel at the left side of the unit, a “Filter access panel” label is attatched.
2. Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.
Operation Tips
Do not overcool the room.
This is not good for your health and
wastes electricity.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and windows
as much as possible to keep the
cool air in the room.
Keep blinds or curtains
closed.
Do not let direct sunshine enter the
room when the air conditioner is in
operation.
Clean the air filter regularly.
Blockages in the air filter reduce the
airflow and lower cooling and
dehumidifying effects.
Ventilate the room
occasionally.
Since windows are kept closed, it is
a good idea to open them and
ventilate the room now and then.
CAUTION
Before removing access panels to draw out air filters, disconnect power supply.
Since the fan rotates at high speed, it may cause a serious injury
∂ Clean at least once every month using a vacuum cleaner or washing with a neutral detergent in
lukewarm water.
∑ After washing with water, dry it well in the shade.
• Do not expose the air filter to direct sunlight or heat from a fire when drying it.
26 Single Package Air Conditioner
1,MFL67445913, 17. 8. 2. 3:59 Page 27
Before you call for service...
Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer
or service center.
Case
Explanation
• Have you made a mistake in timer operation?
- See reservation instructions.
Does not operate.
• Has the fuse blown or has the circuit breaker been tripped?
• Does the remote controller display "
" on the LCD?
This means that protective device has been tripped please
contact your dealer or service center.
The room has a peculiar odor.
• Check that this is not a damp smell exuded by the walls, carpet,
furniture, or cloth items in the room.
It seems that condensation is
leaking from the air conditioner.
• Condensation occurs when the airflow from the air conditioner
cools the warm air.
Air conditioner does not operate for
about 3 minutes when restarted.
• This is the protection device of the air conditioner.
• Wait about three minutes and operation will begin.
• Is the air filter dirty?
- See air filter cleaning instructions.
• The room may have been very hot when the air conditioner was first
turned on. Allow time for it to cool down.
Does not cool or heat effectively.
• Has the setting temperature been set incorrectly?
- See temperature setting instructions.
• Has the setting temperature been set incorrectly?
• Are the unit's air inlet or outlet vents obstructed?
Remote controller display is faint, or
no display at all.
• Has the circuit breaker been tripped?
Power outage occurs.
(Outage Compensation Function)
It automatically retrieves the previous operating conditions.
You don't need to press any buttons.
(Additional functions will not be retrieved automatically.)
Owner's Manual 27
ENGLISH
Before you call for service...
1,MFL67445913, 17. 8. 2. 3:59 Page 28
28 Single Package Air Conditioner